Effects of nitrogen fertilizer on structure and physicochemical properties of ‘super’ rice starch

Optimization of the morphological, structural, and physicochemical properties of maize starch using straw returning and nitrogen fertilization in Northeast China

The combination of straw returning and nitrogen (N) fertilization is a popular tillage mode and essential strategy for achieving stable yield and high quality. However, the optimal combination strategy and the influence of tillage mode on the morphological, crystalline, and molecular structures of maize starch remain unclear. We conducted a long-term field experiment over 7 years in Northeast China using two tillage modes, rotary tillage with straw returning (RTS) and plow tillage with straw returning (PTS), and four N application rates. The relative crystallinity, 1045/1022 cm-1 value, and B2 and B3 chains of maize starch were higher under RTS than under PTS, resulting in increased stability of starch and improvements in gelatinization enthalpy and temperature. The surface of the starch granules induced by N fertilizer was smoother than that under the N0 (0 kg N ha-1) treatment. The proportion of amylose content, solubility, swelling power, and light transmittance increased under N2 (262 kg N ha-1) treatment, along with improvement in starch pasting properties. These results suggest that RTS combined with N2 treatment can regulate the morphological, structural, and physicochemical characteristics of maize starch, providing an essential reference for improving the quality of maize starch from an agronomic point of view.

Dielectric barrier discharge cold plasma modifies the multiscale structure and functional properties of banana starch

Banana starch has attracted significant attention due to its abundant content of resistant starch. This study aims to compare the multiscale structure and functional properties of banana starch obtained from five cultivated varieties and investigate the impact of dielectric barrier discharge cold plasma (DBD) treatment on these starch characteristics. All five types of natural banana starch exhibited an elliptical and irregular shape, conforming to the CB crystal structure, with a bimodal distribution of branch chain lengths. The resistant starch content ranged from 88.9 % to 94.1 %. Variations in the amylose content, amylopectin branch chain length distribution, and structural characteristics resulted in differences in properties such as gelatinization behavior and sensitivity to DBD treatment. The DBD treatment inflicted surface damage on starch granules, reduced the amylose content, shortened the amylopectin branch chain length, and changed the relative crystallinity to varying degrees. The DBD treatment significantly increased starch solubility and light transmittance. Simultaneously, it resulted in a noteworthy decrease in peak viscosity and gelatinization enthalpy of starch paste. The in vitro digestibility test showed that 76.2 %-86.5 % of resistant starch was retained after DBD treatment. The DBD treatment renders banana starch with reduced viscosity, increased paste transparency, enhanced solubility, and broadens its potential application.

Correlation between in vitro starch digestibility and starch structure/physicochemical properties in rice

Natural resistant starch (RS) in rice provides human health benefits, and its concentration in rice is influenced by the structure and physicochemical properties of starch. The native starch structures and physicochemical properties of three rice varieties, QR, BR58, and BR50, and their relationships to in vitro digestibility were studied. The starch granules in all three varieties were irregular or polyhedral in shape. There were a few oval granules and a few pinhole structures in QR, no oval granules but a higher number of pinholes in BR58, and no oval granules and pinholes in BR50. QR is a low-amylose (13.8 %), low-RS (0.2 %) variety. BR58 is a low-amylose (15.3 %), high-RS (6.5 %) variety. BR50 is a high-amylose (26.7 %), high-RS (8.3 %) variety. All three starches exhibited typical A-type diffraction patterns. Starch molecular weight, chain length distribution, starch branching degree, pasting capabilities, and thermal properties differed considerably between the rice starches. The RS contents of the rice starch varieties were positively correlated with AAC, Mw/Mn, Mz/Mn, peak 3, B, PTime, and Tp and negatively correlated with Mn, peak 2, DB, PV, and BD, according to Pearson's correlation analysis. These findings may be helpful for the breeding and development of high-RS rice varieties.

Effects of nitrogen application on physicochemical properties of rice starch under elevated temperature

Nitrogen fertilization can mitigate the negative effects of high temperatures on rice. In this study, we simulated dynamic field temperature increases using a free-air temperature enhancement system. Changes in the physicochemical properties of starch were investigated under increasing nitrogen fertilization during the grain-filling stage. We observed that the application of nitrogen at elevated temperatures (ETN) did not change the chain length distribution compared with elevated temperatures (ET) alone; however, it did significantly increase the heights of the first and second amylose peaks. Specifically, ETN significantly decreased the height of fifth amylopectin and relative crystallinity, and the changes it introduced in the physicochemical properties of starch were greater than those of ET. Overall, these changes in starch properties may be associated with the ability of nitrogen to facilitate the maintenance of rice quality at high temperatures.

Transcriptome analysis reveals the mechanism of nitrogen fertilizers in starch synthesis and quality in waxy and non-waxy proso millet

Recent findings suggest that optimal application of nitrogen fertilizers can effectively improve the quality of proso millet (PM). Here, we aimed to investigate the pathways associated with starch synthesis and metabolism to elucidate the effect and molecular mechanisms of nitrogen fertilization in starch synthesis and properties in waxy and non-waxy PM varieties using transcriptomic techniques. Co-expression network analysis revealed that the regulation of starch synthesis and quality in PM by nitrogen fertilizer mainly occurred in the S2 and S3 stages during grain filling. Nitrogen fertilization inhibited glycolysis/gluconeogenesis and starch biosynthesis in grains, but increased starch degradation to maltose and dextrin and then to glucose. Moreover, nitrogen fertilization increased starch accumulation by upregulating the expression of SuS and malZ genes, thereby increasing the total starch content in grains. In contrast, nitrogen fertilization suppressed the expression of GBSS gene and decreased amylose content in PM grains, resulting in a relatively higher crystallinity, light transmittance, and breakdown viscosity in the two PM varieties. Overall, these results provided transcriptomics insights into the molecular mechanisms by which nitrogen fertilization regulates starch quality in PM, identified key genes that associated with the starch properties, and provided new insights into the quality cultivation of PM.

Nitrogen fertilizer affects the cooking quality and starch properties of proso millet (Panicum miliaceum L.)

Nitrogen has a critical influence on the yield and quality of proso millet. However, the exact impact of nitrogen on the cooking quality of proso millet is not clear. In this study, the cooking quality and starch properties of two proso millet varieties (waxy-Shaanxi millet [wSM] variety and non-waxy-Shaanxi millet [nSM] variety) were compared and analyzed under nitrogen fertilizer treatment (N150, 150 kg/hm2) and a control group without nitrogen application (N0, 0 kg/hm2). Compared with the N0 group, the N150 treatment significantly increased protein content, amylose levels, and total yield. Employing rapid visco analyser and differential scanning calorimetry analyses, we observed that under the N150 treatment, the peak viscosity and breakdown viscosity of proso millet powder were diminished, while the setback viscosity and enthalpy values (ΔH) increased. In addition, nitrogen treatment increased the solids content in the obtained rice soup and significantly hardened the texture of the rice. At the same time, we noticed that the absorption capacity of starch in water and oil was enhanced. These results showed that nitrogen fertilizer had significant effects on the cooking quality and starch properties of proso millet.

The differences in metabolites, starch structure, and physicochemical properties of rice were related to the decrease in taste quality under high nitrogen fertilizer application

Nitrogen fertilizer application is one of the key cultivation practices to improve rice yields. However, the application of high nitrogen fertilizers often leads to a reduction in the stickiness of the rice after cooking, thus reducing the taste quality of rice. Moreover, there are differences in taste quality among rice varieties, and the mechanism has not been studied in depth. In this study, two rice varieties (Meixiangzhan2hao and Exiang2hao) were planted under two nitrogen fertilizer levels. The physicochemical properties and taste quality of the rice were determined after maturity. Our results showed that high nitrogen fertilizer level alters tryptophan metabolism in rice, increasing most amino acid content and protein content in rice. The high content of protein and the higher short-range ordered structure of starch inhibited the gelatinization characteristics of starch and reduced the taste quality of rice. Under high nitrogen fertilizer application, Exiang2hao showed smaller increases in protein content, lower level of amylose and relative crystallinity, and higher content of lipid metabolites. These differences in chemical substances resulted in a less pronounced reduction in the taste quality of Exiang2hao. In this study, the taste quality of different rice varieties under different levels of nitrogen fertilizer application was analyzed, providing new ideas for future improvement of rice taste quality.

Long-term straw return improves cooked indica rice texture by altering starch structural, physicochemical properties in South China

Straw return can improve rice eating quality by modifying starch formation from long-term field trials, whereas the relevant mechanisms are still unknown. A long-term field experiment, including straw removal (CK), straw burning return (SBR), and straw return (SR) was conducted to investigate the starch structure, physicochemical properties, and cooked rice textures of indica early- and late-rice. Compared with CK, SBR and SR enhanced relative crystallinity, amylopectin long chains in both rice seasons, and gelatinization temperatures in late rice. Compared to SBR, SR decreased protein content and amylopectin short chains but increased starch branching degree, breakdown, and stickiness, ultimately contributing to improved starch thermal and pasting properties. Meanwhile, SR decreased hardness, cohesiveness, and chewiness, resulting in cooked texture meliorated, which was mainly attributed to amylopectin chain length and starch granule size. The results suggest that SR increased cooked texture of indica rice by altering starch structural and physicochemical properties.

Starch multiscale structure and physicochemical property alterations in high-quality indica rice quality and cooked rice texture under different nitrogen panicle fertilizer applications

The starch multiscale structure, physiochemical properties, grain quality and cooked rice texture of high-quality early and late indica were analyzed under nitrogen panicle fertilizer (low panicle fertilizer, LPF; middle panicle fertilizer, MPF; high panicle fertilizer, HPF) treatments and their internal relations were investigated. Compared to the MPF treatment, the starch granules in HPF and LPF had more surface-proteins and irregular voids for high-quality early and late indica rice cultivars, respectively. Nitrogen panicle fertilization application increased amylopectin medium and long chains as well as protein content, resulting in higher relative crystallinity and gelatinization temperatures. Moderate changes in starch multistructures and physicochemical properties such as branching degree, amylopectin medium chain, and pasting viscosities derived from MPF treatment significantly improved processing, appearance qualities and cooked rice texture. Additionally, the decrease in starch branching, gelatinization temperatures, and granule uniformity along with an increase in large granules, breakdown, and △Hgel under MPF treatment were the main reasons for improving rice textural properties.

Strategies for starch customization: Agricultural modification

Raw starch is commonly modified to enhance its functionality for industrial applications. There is increasing demand for 'green' modified starches from both end-consumers and producers. It is well known that environmental conditions are key factors that determine plant growth and yield. An increasing number of studies suggest growth conditions can expand affect starch structure and functionality. In this review, we summarized how water, heat, high nitrogen, salinity, shading, CO2 stress affect starch biosynthesis and physicochemical properties. We define these treatments as a fifth type of starch modification method - agricultural modification - in addition to chemical, physical, enzymatic and genetic methods. In general, water stress decreases peak viscosity and gelatinization enthalpy of starch, and high temperature stress increases starch gelatinization enthalpy and temperature. High nitrogen increases total starch content and regulates starch viscosity. Salinity stress mainly regulates starch and amylose content, both of which are genotype-dependent. Shading stress and CO2 stress can both increase starch granule size, but these have different effects on amylose content and amylopectin structure. Compared with other modification methods, agricultural modification has the advantage of operating at a large scale and a low cost and can help meet the ever-rising market of clean-label foods and ingredients.

Improving rice eating and cooking quality by enhancing endogenous expression of a nitrogen-dependent floral regulator

Improving rice eating and cooking quality (ECQ) is one of the primary tasks in rice production to meet the rising demands of consumers. However, improving grain ECQ without compromising yield faces a great challenge under varied nitrogen (N) supplies. Here, we report the approach to upgrade rice ECQ by native promoter-controlled high expression of a key N-dependent floral and circadian clock regulator Nhd1. The amplification of endogenous Nhd1 abundance alters rice heading date but does not affect the entire length of growth duration, N use efficiency and grain yield under both low and sufficient N conditions. Enhanced expression of Nhd1 reduces amylose content, pasting temperature and protein content while increasing gel consistence in grains. Metabolome and transcriptome analyses revealed that increased expression of Nhd1 mainly regulates the metabolism of carbohydrates and amino acids in the grain filling stage. Moreover, expression level of Nhd1 shows a positive relationship with grain ECQ in some local main cultivars. Thus, intensifying endogenous abundance of Nhd1 is a promising strategy to upgrade grain ECQ in rice production.

Effects of elevated nitrogen fertilizer on the multi-level structure and thermal properties of rice starch granules and their relationship with chalkiness traits

BACKGROUND

Chalkiness in rice reduces its market value and affects consumer acceptance. Research on the mechanism of chalkiness formation has focused primarily on the activity of key enzymes of carbon metabolism and starch accumulation. The relationship between the formation of chalkiness induced by N fertilizer and rice starch's multi-level structure and thermal properties still needs to be fully elucidated.

RESULTS

In this study, the rates of chalky grains and degree of chalkiness decreased with the increase in N fertilizer dosage. This was attributed to an increased proportion of short chains, ordered structure carbon chains, small starch granules, and branched starches, and a higher degree of crystallinity and ΔHg in protein, and a decreased proportion of amylose, large starch granules, and weighted average diameter of starch granule surface area and volume. Application of N fertilizer promoted an increased proportion of short-branched chain amylopectin to develop a more ordered carbohydrate structure and crystalline lamella. These effects enhanced the normal development and compactness of starch granules in grains, and improved their arrangement morphology, thereby reducing the chalkiness in rice.

CONCLUSION

These changes in starch multi-level structure and protein improve the physicochemical characteristics of starch and enhance the fullness, crystallinity and compactness of starch granules, while synergistically increasing the regularity and homogeneity of starch granules and thus optimizing the stacking pattern of starch granules, leading to a reduction in rice chalkiness under nitrogen fertilization and thus improving the appearance of rice. © 2023 Society of Chemical Industry.

Effects of postponing nitrogen topdressing on starch structural properties of superior and inferior grains in hybrid indica rice cultivars with different taste values

Introduction

Nitrogen (N) fertilizer management, especially postponing N topdressing can affect rice eating quality by regulating starch quality of superior and inferior grains, but the details are unclear. This study aimed to evaluate the effects of N topdressing on starch structure and properties of superior and inferior grains in hybrid indica rice with different tastes and to clarify the relationship between starch structure, properties, and taste quality.

Methods

Two hybrid indica rice varieties, namely the low-taste Fyou 498 and high-taste Shuangyou 573, were used as experimental materials. Based on 150 kg·N hm-2, three N fertilizer treatments were established: zero N (N0), local farmer practice (basal fertilizer: tillering fertilizer: panicle fertilizer=7:3:0) (N1), postponing N topdressing (basal fertilizer: tillering fertilizer: panicle fertilizer=3:1:6) (N2).

Results

The starch granules of superior grains were more complete, and the decrease in small granules content and the stability of starch crystals were a certain extent less than those of inferior grains. Compared with N1, under N2, low-taste and high-taste varieties large starch granules content were significantly reduced by 6.89%, 0.74% in superior grains and 4.26%, 2.71% in inferior grains, the (B2 + B3) chains was significantly reduced by 1.61%, 0.98% in superior grains, and 1.18%, 0.97% in inferior grains, both reduced the relative crystallinity and 1045/1022 cm-1, thereby decreasing the stability of the starch crystalline region and the orderliness of starch granules. N2 treatment reduced the ΔHgel of two varieties. These changes ultimately contributed to the enhancement of the taste values in superior and inferior grains in both varieties, especially the inferior grains. Correlation analysis showed that the average starch volume diameter (D[4,3]) and relative crystallinity were significantly positively correlated with the taste value of superior and inferior sgrains, suggesting their potential use as an evaluation index for the simultaneous enhancement of the taste value of rice with superior and inferior grains.

Discussion

Based on 150 kg·N hm-2, postponing N topdressing (basal fertilizer: tillering fertilizer: panicle fertilizer=3:1:6) promotes the enhancement of the overall taste value and provides theoretical information for the production of rice with high quality.

Effects of Salt Stress on Grain Yield and Quality Parameters in Rice Cultivars with Differing Salt Tolerance

Rice yield and grain quality are highly sensitive to salinity stress. Salt-tolerant/susceptible rice cultivars respond to salinity differently. To explore the variation in grain yield and quality to moderate/severe salinity stress, five rice cultivars differing in degrees of salt tolerance, including three salt-tolerant rice cultivars (Lianjian 5, Lianjian 6, and Lianjian 7) and two salt-susceptible rice cultivars (Wuyunjing 30 and Lianjing 7) were examined. Grain yield was significantly decreased under salinity stress, while the extent of yield loss was lesser in salt-tolerant rice cultivars due to the relatively higher grain filling ratio and grain weight. The milling quality continued to increase with increasing levels. There were genotypic differences in the responses of appearance quality to mild salinity. The appearance quality was first increased and then decreased with increasing levels of salinity stress in salt-tolerant rice but continued to decrease in salt-susceptible rice. Under severe salinity stress, the protein accumulation was increased and the starch content was decreased; the content of short branched-chain of amylopectin was decreased; the crystallinity and stability of the starch were increased, and the gelatinization temperature was increased. These changes resulted in the deterioration of cooking and eating quality of rice under severe salinity-stressed environments. However, salt-tolerant and salt-susceptible rice cultivars responded differently to moderate salinity stress in cooking and eating quality and in the physicochemical properties of the starch. For salt-tolerant rice cultivars, the chain length of amylopectin was decreased, the degrees of order of the starch structure were decreased, and pasting properties and thermal properties were increased significantly, whereas for salt-susceptible rice cultivars, cooking and eating quality was deteriorated under moderate salinity stress. In conclusion, the selection of salt-tolerant rice cultivars can effectively maintain the rice production at a relatively high level while simultaneously enhancing grain quality in moderate salinity-stressed environments. Our results demonstrate specific salinity responses among the rice genotypes and the planting of salt-tolerant rice under moderate soil salinity is a solution to ensure rice production in China.

Effects of biochar coupled with chemical and organic fertilizer application on physicochemical properties and in vitro digestibility of common buckwheat (Fagopyrum esculentum Moench) starch

Common buckwheat starch, a functional ingredient, has wide food and non-food applications. Excessive chemical fertilizer application during grain cultivation decreases quality. This study examined the effects of different combinations of chemical fertilizer, organic fertilizer, and biochar treatment on the physicochemical properties and in vitro digestibility of starch. The amendment of both organic fertilizer and biochar was observed to have a greater impact on the physicochemical properties and in vitro digestibility of common buckwheat starch in comparison to organic fertilizer amendment solely. The combined application of biochar, chemical, and organic nitrogen in an 80:10:10 ratio significantly increased the amylose content, light transmittance, solubility, resistant starch content, and swelling power of the starch. Simultaneously, the application reduced the proportion of amylopectin short chains. Additionally, this combination decreased the size of starch granules, weight-average molecular weight, polydispersity index, relative crystallinity, pasting temperature, and gelatinization enthalpy of the starch compared to the utilization of chemical fertilizer alone. The correlation between physicochemical properties and in vitro digestibility was analyzed. Four principal components were obtained, which accounted for 81.18 % of the total variance. These findings indicated that the combined application of chemical fertilizer, organic fertilizer, and biochar would improve common buckwheat grain quality.

Biochar and Nitrogen Fertilizer Change the Quality of Waxy and Non-Waxy Broomcorn Millet (Panicum miliaceum L.) Starch

The overuse of nitrogen fertilizers has led to environmental pollution, which has prompted the widespread adoption of biochar as a soil conditioner in agricultural production. To date, there has been a lack of research on the effects of biochar and its combination with nitrogen fertilizer on the quality of broomcorn millet (Panicum miliaceum L.) starch. Thus, this study examined the physicochemical characteristics of starch in two types of broomcorn millet (waxy and non-waxy) under four different conditions, including a control group (N0), nitrogen fertilizer treatment alone (N150), biochar treatment alone (N0+B), and a combination of biochar and nitrogen fertilizer treatments (N150+B). The results showed that, in comparison to the control, all the treatments, particularly N150+B, decreased the content of amylose and gelatinization temperature and enhanced the starch transparency gel consistency and swelling power. In addition, biochar can improve the water solubility of starch and the gelatinization enthalpy. Importantly, the combination of biochar and nitrogen fertilizer increased the proportion of A-granules, final viscosity, starch content, and the average degree of amylopectin in polymerization. Thus, this research indicates that the combinations of biochar and nitrogen fertilizer result in the most significant improvement in the quality of starch produced from broomcorn millet.

Effect of Fertilization Regime of Common Wheat (Triticum aestivum) on Flour Quality and Shelf-Life of PDO Tuscan Bread

The shelf-life of bread is influenced by flour components, such as starch, composed of amylose and amylopectin. The aim was to test the effect of different balances of N (45, 90, 135 kg/ha) and P (48, 96 kg/ha) fertilizers on the flour characteristics and consequently the shelf-life of PDO Tuscan bread, stored in different modified atmosphere packaging (Ar, N₂, Air). The amylose and phytochemical compounds were increased by N and decreased by the addition of P, but excessive doses of N (135 kg/ha) had a negative effect on flour quality. In the bread, the study highlighted the tendency of N₂ and Ar, as storage filler gases, to reduce water loss, slow down the staling process, and prolong shelf-life. However, the most significant influence on shelf-life was related to the different fertilizations of wheat. In fact, when N was present in equal dose to P (90/96 or 45/48 kg/ha) or slightly higher (90/48 kg/ha), the bread tended to last longer over time. Instead, when these ratios were unbalanced in favor of N (135/48 or 135/96 kg/ha) and in favor of P (45/96 kg/ha), the shelf-life decreased considerably.

Moderate Reduction in Nitrogen Fertilizer Results in Improved Rice Quality by Affecting Starch Properties without Causing Yield Loss

The quality and starch properties of rice are significantly affected by nitrogen. The effect of the nitrogen application rate (0, 180, and 230 kg ha^-1) on the texture of cooked rice and the hierarchical structure and physicochemical properties of starch was investigated over two years using two japonica cultivars, Bengal and Shendao505. Nitrogen application contributed to the hardness and stickiness of cooked rice, reducing the texture quality. The amylose content and pasting properties decreased significantly, while the relative crystallinity increased with the increasing nitrogen rates, and the starch granules became smaller with an increase in uneven and pitted surfaces. The proportion of short-chain amylopectin rose, and long-chain amylopectin declined, which increased the external short-range order by 1045/1022 cm^-1. These changes in hierarchical structure and grain size, regulated by nitrogen rates, synergistically increased the setback viscosity, gelatinization enthalpy and temperature and reduced the overall viscosity and breakdown viscosity, indicating that gelatinization and pasting properties were the result of the joint action of several factors. All results showed that increasing nitrogen altered the structure and properties of starch, eventually resulting in a deterioration in eating quality and starch functional properties. A moderate reduction in nitrogen application could improve the texture and starch quality of rice while not impacting on the grain yield.

Effects of Slow-Release Fertilizer on Lotus Rhizome Yield and Starch Quality under Different Fertilization Periods

Slow-release fertilizer is an environmentally friendly fertilizer that is widely used in crop cultivation instead of traditional nitrogen fertilizer. However, the optimal application time of slow-release fertilizer and its effect on starch accumulation and rhizome quality of lotus remains unclear. In this study, two slow-release fertilizer applications (sulfur-coated compound fertilizer, SCU, and resin-coated urea, RCU) were fertilized under three fertilization periods (the erect leaf stage, SCU1 and RCU1; the erect leaf completely covering the water stage, SCU2 and RCU2; and the swelling stage of lotus rhizomes, SCU3 and RCU3) to study the effects of different application periods. Compared with CK (0 kg∙ha^-1 nitrogen fertilizer), leaf relative chlorophyll content (SPAD) and net photosynthetic rate (Pn) remained at higher levels under SCU1 and RCU1. Further studies showed that SCU1 and RCU1 increased yield, amylose content, amylopectin and total starch, and the number of starch particles in lotus, and also significantly reduced peak viscosity, final viscosity and setback viscosity of lotus rhizome starch. To account for these changes, we measured the activity of key enzymes in starch synthesis and the relative expression levels of related genes. Through analysis, we found that these parameters increased significantly under SCU and RCU treatment, especially under SCU1 and RCU1 treatment. The results of this study showed that the one-time application at the erect leaf stage (SCU1 and RCU1) could improve the physicochemical properties of starch by regulating the key enzymes and related genes of starch synthesis, thus improving the nutritional quality of lotus rhizome. These results provide a technical choice for the one-time application of slow-release fertilizer in lotus rhizome production and cultivation.

Shading affects the starch structure and digestibility of wheat by regulating the photosynthetic light response of flag leaves

Heavy haze-induced decreases in solar radiation represent an important factor that affects the structural properties of starch macromolecules. However, the relationship between the photosynthetic light response of flag leaves and the structural properties of starch remains unclear. In this study, we investigated the impact of light deprivation (60 %) during the vegetative-growth or grain-filling stage on the leaf light response, starch structure, and biscuit-baking quality of four wheat cultivars with contrasting shade tolerance. Shading decreased the apparent quantum yield and maximum net photosynthetic rate of flag leaves, resulting in a lower grain-filling rate and starch content and higher protein content. Shading decreased the starch, amylose, and small starch granule amount and swelling power but increased the larger starch granule amount. Under shade stress, the lower amylose content decreased the resistant starch content while increasing the starch digestibility and estimated glycemic index. Shading during the vegetative-growth stage increased starch crystallinity, 1045/1022 cm^-1 ratio, starch viscosity, and the biscuit spread ratio, while shading during the grain-filling stage decreased these values. Overall, this study indicated that low light affects the starch structure and biscuit spread ratio by regulating the photosynthetic light response of flag leaves.

Nitrogen fertilizer affects starch synthesis to define non-waxy and waxy proso millet quality

Understanding the effect of nitrogen fertilization on the quality of proso millet is key to expanding the use of this crop to address water scarcity and food security. Therefore, this study determined the impact of nitrogen fertilization on the proso millet quality. Nitrogen fertilization significantly increased the NR and GS activities and decreased the GBSSase activity, resulting in an increase in protein content and reduction in amylose content and L*, which decreased the appearance quality. Nitrogen fertilization increased the proportion of short amylopectin chains, resulting in a more disordered carbohydrate structure, and decreased the proportion of hydrophilic functional groups, contributing to an increase in setback viscosity and decrease in pasting temperature in the waxy (w139) variety. In contrast, the non-waxy (n297) variety exhibited a larger proportion of long amylopectin chains, lower ordered structure and hydrophobic functional groups after nitrogen fertilization, which strengthened the inter- and intramolecular forces of starch colloids.

Comprehensive Evaluation of Rice Qualities under Different Nitrogen Levels in South China

There is a need to comprehensively evaluate the rice quality of different rice varieties under different nitrogen treatments. Therefore, in this study, we used twenty-one hybrid indica rice varieties and twenty-three inbred japonica rice varieties with three nitrogen fertilizer levels to investigate differences in rice qualities. As compared with hybrid indica rice, inbred japonica rice had lower coefficient of variation values for grain shape, mild rice percentage, and head rice percentage, but relatively higher coefficient of variation values for chalkiness traits, appearance, and taste value of cooked rice. A principal component analysis and membership function method were used to comprehensively evaluate the qualities of rice. The overall eating quality value by sensory evaluation and head rice percentage explained 61.3% and 67.9% of the variations in comprehensive quality of hybrid indica rice and inbred japonica rice across different nitrogen levels, respectively. We also found that rice comprehensive quality was better under low nitrogen levels for hybrid indica rice, while for inbred japonica rice, properly increasing nitrogen application could improve the comprehensive quality.

Different nitrogen fertilizer application in the field affects the morphology and structure of protein and starch in rice during cooking

Nitrogen fertilization is one of the most important cultivation practices that affects the eating quality of rice. During the cooking process, nitrogen fertilizer application in the field changed the structure of protein and starch during cooking, which eventually reduced the rice eating quality. However, the morphology and structure of rice during cooking under high nitrogen fertilizer application in the field have not been explored. The relationship between the morphological and structural changes of rice protein and starch during cooking and the rice eating quality has not been studied. In this study, we conducted field trials at two nitrogen fertilizer levels (0 N and 350 N), and the rice was cooked after harvest. Our results showed that the peak viscosity of rice flour was 3326 cp and 2453 cp at 0 N and 350 N, respectively, and the peak viscosity of rice starch was 3424 cp and 3378 cp, respectively. Rice proteins played an important role in the starch gelatinization properties and thermodynamic properties. High nitrogen fertilizer application increased the protein content of rice from 5.97 % to 11.32 %, and more protein bodies adhered to the surface of amyloplasts eventually inhibiting starch gelatinization. The rice proteins could bind to amylose-lipid complexes during cooking, promoting the formation of V-type diffraction peaks. What is more, under high nitrogen fertilizer, rice protein had more β-sheets, which slowed the entry of water into the interior of starch molecules and prevented the destruction of the short-range ordered structure of starch. Our study provides the possibility to further improve the eating quality of rice under nitrogen fertilizer treatment.

Effects of different altitudes on the structure and properties of potato starch

The main element influencing the quality of potato starch is the environment. To investigate the effects of different altitude cultivation locations on the molecular structure and physicochemical properties of starch, two potato varieties, Jiusen No.1 B1 and Qingshu No.9 B2, were planted in three different altitude zones: A1 at low altitude (Chongzhou 450 m), A2 at middle altitude (Xichang 2800 m), and A3 at high altitude (Litang 3650 m). The results showed that the average volume, number, surface area diameter, average branched polymerization degree, crystallinity, and gelatinization temperature of two potato granules in high altitude areas were significantly lower than those in middle and low altitude areas were, and the gelatinization performance of potato starch was affected according to the correlation of starch structure characteristics. Potato starch with more short-branched chains and less long branched chains resulted in a lower gelatinization temperature in high altitude areas. The results showed that Jiusen No. 1 and Qingshu No. 9 were mainly affected by accumulated radiation and accumulated rainfall in Litang, a high altitude area, and by effective accumulated temperature in Xichang, a middle altitude area. This study quantified the influence of meteorological factors on the main starch quality of potato tubers. The results can be used as a theoretical basis for the scientific planting of high-quality potatoes.

Starch Physicochemical Properties of Normal Maize under Different Fertilization Modes

Improving the quality with desired functions of natural starch through agronomic practice will meet the increasing need of people for natural, functional foods. A one-off application of slow-release fertilizer is a simple and efficient practice in maize production, though its influence on the starch quality is scarce. In the present study, the structural and functional properties of the starch of normal maize under two fertilization modes (one-off application of slow-release fertilizer at the sowing time (SF), and three applications of conventional fertilizer at the sowing time, and topdressing at the jointing and flowering stages (CF)) under the same fertilization level (N/P₂O₅/K₂O = 405/135/135 kg/ha) were studied using Jiangyu877 (JY877) and Suyu30 (SY30) as materials. The observed results indicate that the size of starch granules was enlarged by fertilization and the size was the largest under CF in both hybrids. The amylose content was unaffected by CF and reduced by SF in both hybrids. In comparison to no fertilizer (0F), the peak 1/peak 2 ratio was decreased by CF in both hybrids, whereas the ratio under SF was unaffected in JY877 and decreased in SY30. The amylopectin average chain-length was reduced by fertilization and the reduction was higher under CF in JY877. The relative crystallinity was increased by CF in both hybrids and the value under SF was unaffected in SY30 and increased in JY877. The peak, trough, and final viscosities of starch were increased by fertilization in both hybrids. The starch thermal characteristics in response to fertilization modes were dependent on hybrids. The retrogradation enthalpy and percentage were increased by CF in both hybrids, whereas those two parameters under SF were increased in SY30 and decreased in JY877. In conclusion, starch with similar granule size, higher peak 1/peak 2 ratio, and lower relative crystallinity was obtained under SF than under CF for both hybrids. Longer amylopectin chain-length was observed in JY877, which induced lower pasting viscosities in SY30 and lower retrogradation characteristics in JY877.

Effects of selenium solution on the crystalline structure, pasting and rheological properties of common buckwheat starch

Selenium is an important element that affects human growth and development, and also affects the yield and quality of common buckwheat. In our study, two common buckwheat varieties were sprayed with different concentrations (0 g/hm², 5 g/hm², 20 g/hm²) of sodium selenite solution at the initial flowering period and the full flowering period, respectively, to determine the effects of selenium solution on the physicochemical properties of common buckwheat starch. With increasing selenium levels, the amylose content, peak viscosity, breakdown, relative crystallinity, pasting temperature and gelatinization enthalpy first decreased and then increased, while the transparency showed a trend of increasing and then decreasing. All samples exhibited a typical A-type pattern, while at high selenium level, the degree of short-range order of common buckwheat starches changed. From the rheological properties, it can be seen that the starch paste is dominated by elastic properties, while the low selenium treatment decreases the viscosity of the starch paste. These results showed that spraying different concentrations of selenium solutions at different periods significantly affected the physicochemical properties of common buckwheat starch.

Nitrogenous Fertilizer Levels Affect the Physicochemical Properties of Sorghum Starch

Nitrogen is a key factor affecting sorghum growth and grain quality. This experiment was designed to investigate the physicochemical properties of sorghum starch in four sorghum varieties (Liaoza 10, Liaoza 19, Jinza 31, and Jinza 34) under four nitrogen levels: 0 kg/ha urea (N1), 300 kg/ha urea as base fertilizer (N2), 300 kg/ha urea as topdressing at the jointing stage (N3), and 450 kg/ha urea as topdressing at the jointing stage (N4). The results showed that grain size and amylose content increased with increasing nitrogen fertilizer level, peaking at N3. The peak viscosity, final viscosity, gelatinization temperature, initial temperature, final temperature, and enthalpy value increased with the nitrogenous fertilizer level, peaking at N3. The application of nitrogen fertilizer at the jointing period significantly increased the above indicators. However, excess nitrogen at the jointing period (N4) can significantly reduce the above indicators, thus changing the physicochemical properties and structure of sorghum starch. Overall, nitrogen significantly affects the structure and physicochemical properties of sorghum starch.

Relationship between nitrogen fertilizer and structural, pasting and rheological properties on common buckwheat starch

Nitrogen is an essential element for the yield and quality of grain. In this study, the structural and physicochemical properties of two common buckwheat varieties under four nitrogen levels (0, 90, 180, 270 kg N ha^-1) at one location in two years were investigated. With increasing nitrogen level, the contents of moisture and amylose decreased but the contents of ash and crude protein increased. Excessive nitrogen application significantly increased the granule size, but reduced the light transmittance, water solubility, swelling power, absorption of water and oil. All the samples showed a typical A - type pattern, while high relative crystallinity and low order degree were observed under high nitrogen level. The samples under high nitrogen level had lower textural properties, pasting properties and rheological properties but higher pasting temperature and gelatinization enthalpy. These results indicated that nitrogen fertilizer significantly affected the structural and physicochemical properties of common buckwheat starch.

Interactive Effects of Nitrogen and Potassium on Grain Yield and Quality of Waxy Maize

Reasonable fertilization of nitrogen (N) and potassium (K) had significant effects on maize growth. In this experiment, two N levels (N180 and N225 kg ha⁻¹) and four K treatments (K0, K75, K150 and K75 + 75 kg ha⁻¹) were set to study the effects of combined application of N and K on the grain yield and quality of waxy maize. The results showed that grain yield increased with increasing K under the same N level, and top-dressing K further increased the grain yield. K application increased starch content significantly at N180 and decreased significantly at N225, while the protein content increased significantly at the two N levels. The grain starch content with the K75 + 75 treatment increased by 5.8% and 9.0% compared with K150 at the two N levels, and the protein content decreased by 2.9% and 4.7%. Application of K increased the retrogradation enthalpy (ΔH_ret) and retrogradation percentage (%R) at N180. At N225, the ΔH_ret and %R of K75 and K150 decreased, while those of K75 + 75 increased. The ΔH_ret and %R under K75 + 75 at N180 were lower than N225. Under these experiment conditions, 75 kg ha⁻¹ K₂O at sowing date and top-dressed 75 kg ha⁻¹ K₂O at jointing stage (V6) under the conditions of appropriate N reduction could not only effectively improve the pasting and thermal properties of waxy maize flour, but also stabilized the grain yield.

The Starch Physicochemical Properties between Superior and Inferior Grains of Japonica Rice under Panicle Nitrogen Fertilizer Determine the Difference in Eating Quality

Nitrogen fertilizer is essential for rice growth and development, and topdressing nitrogen fertilizer at panicle stage has a huge impact on rice grain quality. However, the effect of panicle nitrogen fertilizer (PNF) on starch physicochemical properties and fine structure remain unclear. In this study, four PNF levels (0, 60, 120, 180 kg N ha−1) were grown with the same basal and tiller fertilizer (150 kg N ha−1). The starch physicochemical properties, fine structure, texture properties and eating quality of two japonica rice were determined. We found that the content of total protein, crude fat and amylose between superior and inferior grains were significantly different. Compared with inferior grains, superior grains had low relative crystallinity, good pasting characteristics and outstanding eating quality. With the increase of nitrogen application rates, the starch volume mean diameter was lower; the average chain length of amylopectin was longer; and the relative crystallinity of starch was higher. The changes above in starch structure resulted in an increase in starch solubility, swelling power and gelatinization enthalpy, and led to a decrease in retrogradation enthalpy, retrogradation percentage and pasting viscosity, consequently contributing to the increase in hardness and stickiness of rice and the deterioration of taste value. These results indicated that topdressing PNF lengthened the amylopectin chain, decreased starch granule size, enhanced crystallization stability and increased gelatinization enthalpy, which were the direct reasons for the deterioration of cooking and eating quality.

Nitrogen Application Rate Affects the Accumulation of Carbohydrates in Functional Leaves and Grains to Improve Grain Filling and Reduce the Occurrence of Chalkiness

Chalkiness, which is highly affected by nitrogen (N) management during grain filling, is critical in determining rice appearance quality and consumer acceptability. We investigated the effects of N application rates 75 (N₁), 150 (N₂), and 225 (N₃) kg ha^-1 on the source-sink carbohydrate accumulation and grain filling characteristics of two indica hybrid rice cultivars with different chalkiness levels in 2019 and 2020. We further explored the relationship between grain filling and formation of chalkiness in superior and inferior grains. In this study, carbohydrates in the functional leaves and grains of the two varieties, and grain filling parameters, could explain 66.2%, 68.0%, 88.7%, and 91.6% of the total variation of total chalky grain rate and whole chalkiness degree, respectively. They were primarily concentrated in the inferior grains. As the N fertilizer application rate increased, the chalky grain rate and chalkiness degree of both the superior and inferior grains decreased significantly. This interfered with the increase in total chalky grain rate and chalkiness. Moreover, the carbohydrate content in the functional leaves increased significantly in N₂ and N₃ compared with that in N₁. The transfer of soluble sugar from the leaves to the grains decreased the soluble sugar and increased total starch contents, accelerated the development of grain length and width, increased grain water content, and effectively alleviated the contradiction between source and sink. These changes promoted the carbohydrate partition in superior and inferior grains, improved their average filling rate in the middle and later stages, optimized the uniformity of inferior grain fillings, and finally led to the overall reduction in rice chalkiness.

Alternative splicing of OsGS1;1 affects nitrogen-use efficiency, grain development, and amylose content in rice

Excessive nitrogen fertilizer application is harmful to the environment and reduces the quality of cereal crops. Maintaining crop yields under low nitrogen (LN) conditions and improving quality are important goals for cereal crop breeding. Although the effects of nitrogen assimilation on crop nitrogen-use efficiency (NUE) have been intensively studied, natural variations of the key assimilation genes underlying grain development and quality are largely unclear. Here, we identified an NUE-associated gene, OsGS1;1, encoding glutamine synthase, through genome-wide association analysis, followed by validation experiments and functional analysis. Fifteen single-nucleotide polymorphisms in the OsGS1;1 region led to alternative splicing that generated two functional transcripts: OsGS1;1a and OsGS1;1b. The elite haplotype of OsGS1;1 showed high OsGS1;1b activity, which improved NUE, affected grain development, and reduced amylose content. The results show that OsGS1;1, which is induced under LN conditions, affects grain formation by regulating sugar metabolism and may provide a new avenue for the breeding of high-yield and high-quality rice (Oryza sativa).

Modification of starch by polysaccharides in pasting, rheology, texture and in vitro digestion: A review

Starch is a copolymer with unique physicochemical characteristics, is known for its low cost, easy degradability, renewable and easy availability. However, natural starches have some undesirable properties such as poor solubility, poor functional properties, lower resistant starch content with reduced retrogradation, and poor stability under various temperatures, pH, which limit their application in food. Different modification methods are used to improve its performance and expand its application. Numerous studies have been conducted to investigate why the addition of small amounts of polysaccharides affects the properties of starch pastes and gels. The application of polysaccharide-modified starch can be seen in the pasting, rheology, texture and in vitro digestive properties of starch gels. The main influencing factors include different starches, different specific polysaccharides, and different methods of preparation of composite pastes and gels. This paper reviews the changes in the properties of starch in terms of pasting, rheology, texture and in vitro digestion after modification with polysaccharides and the mechanism of polysaccharide action on starch.

Combined Effect of Nitrogen Fertilizer Application and High Temperature on Grain Quality Properties of Cooked Rice

Ambient temperature and nitrogen (N) fertilizer are two of the most important factors that affect rice grain quality. However, less information has been available on the interactive effect of N fertilizer and ambient temperature on grain quality under stressful high temperature (HT). In this article, the effects of panicle N fertilizer, ambient temperature, and their interaction on starch composition, particle size distribution of starch granules, starch physicochemical properties, and storage protein accumulation in milled grains were investigated to clarify the potential role of panicle N fertilizer topdressing in regulating rice grain quality under stressful HT by using a two-factor experiment of three N levels in combination with two temperature regimes. Results showed that appropriate application of panicle N fertilizer could attenuate the adverse effect of HT during grain filling on milling quality and chalky occurrence to some extent, particularly for the effective alleviation of HT-induced decrease in milling quality. However, the topdressing of panicle N fertilizer tended to enhance starch gelatinization enthalpy (ΔH) and its setback viscosity in HT-ripening grains, with the simultaneous decrements in the number and surface area proportions of smaller starch granules under the higher N fertilizer in combination with HT exposure. The effects of higher nitrogen fertilizer and HT exposure on total protein content and gluten composition of grains were additively increased. Hence, the topdressing of panicle N fertilizer exacerbated HT-induced deterioration in cooking and eating quality, rather than alleviating the negative impact of HT exposure on the palatability of cooked rice.

Effects of application of rapeseed cake as organic fertilizer on rice quality at high yield level

BACKGROUND

Applying organic fertilizer coupled with chemical fertilizer has been widely adopted to improve crop productivity and quality and develop sustainable agriculture. However, little information is available about the effects of organic fertilizer on the grain quality of rice (Oryza sativa L.), especially nutritional quality and starch quality. In the present study, high yielding 'super' rice cultivars were grown in the field with three cultivation practices, including zero nitrogen application (0N), local high yielding practice with chemical fertilizer (T1) and T1 treatment with additional organic fertilizer (T2).

RESULTS

Application of organic fertilizer synergistically improved rice production, nitrogen use efficiency, milling and appearance quality, and nutritional quality, including the contents of glutelin, essential amino acids and microelements, and also increased amylopectin and the ratio of the short chain of amylopectin, leading to a reduction in relative crystallinity, and decreased prolamin content. Application of organic fertilizer also increased the viscosity and breakdown values, whereas it decreased the pasting temperature and gelatinization enthalpy, resulting in better cooking and eating quality.

CONCLUSION

Overall, application of organific fertilizer could synergistically improve nitrogen use efficiency and grain quality, including the structure and physicochemical properties of starch, contents of high value protein and amino acids, contents of microelements, and cooking and eating quality. © 2021 Society of Chemical Industry.

Fertilization time of slow-release fertilizer affects the physicochemical properties of starch from spring-sown waxy maize

BACKGROUND

Slow-release fertilizer is widely used in cereal crop production because it is ecofriendly and laborsaving. Effects of different application stages (zero-, three-, and six-leaf stages, denoted as SN0, SN3, and SN6, respectively) of slow-release (N/P₂ O₅ /K₂ O = 225/75/75 kg ha^-1 ) fertilizer on physicochemical properties of starch from spring-sown waxy maize were investigated in 2018 and 2019. Application of traditional fertilizer (NCK, compound fertilizer; N/P₂ O₅ /K₂ O = 75/75/75 kg ha^-1 ) at sowing time and urea (N = 150 kg ha^-1 ) at six-leaf stage was designated as the control.

RESULTS

In comparison to the NCK, SN0 reduced grain starch content by 4.9%. Meanwhile, SN3 and SN6 did not affect this parameter. Nevertheless, all treatments, particularly SN6, increased average starch granule size. The slow-release fertilizer reduced proportion of chains with degree of polymerization (DP) > 24. Relative to NCK, SN6 increased starch crystallinity in both years, whereas SN0 and SN3 increased it in 2018 but reduced it in 2019. SN0 reduced peak, trough, and final viscosities, whereas SN3 and SN6 produced similar starch viscosities to those produced by NCK. No fertilizer mode affected gelatinization parameters, but SN6 produced a low retrogradation percentage. In comparison to data for 2018, starch produced in 2019 showed a small granule size, and a high proportion of short amylopectin chains. These properties endowed starch with high viscosity and low retrogradation percentage.

CONCLUSION

In spring-sown waxy maize production, applying slow-release fertilizer at the six-leaf stage produced starch with high viscosity and low retrogradation tendency by enlarging granule size, increasing crystallinity, and reducing the proportion of long chains. © 2021 Society of Chemical Industry.

Analysis of synthesis, accumulation and physicochemical properties of Tartary buckwheat starches affected by nitrogen fertilizer

Nitrogen fertilizer is a crucial factor affecting the growth and grain quality of Tartary buckwheat. This study was to investigate the synthesis, accumulation, and physicochemical properties of Tartary buckwheat starches under four nitrogen levels (0, 90, 180, 270 kg N ha^-1). The results showed that activities of four key enzymes, starch contents all first increased and then decreased with increasing nitrogen levels, and peaked at 180 kg N ha^-1. All the starches showed typical A-type, while higher nitrogen levels significantly increased the relative crystallinity. The viscosities significantly decreased, onset, peak, and conclusion first decreased and then increased, while pasting temperature and gelatinization enthalpy increased with increasing nitrogen levels. Nitrogen fertilizer and year had significant effects on the synthesis, accumulation and physicochemical properties of Tartary buckwheat starch, and the nitrogen level of 180 kg N ha^-1 was more suitable for planting in the northern area of the Loess Plateau.

Starch granule size: Does it matter?

Nature has developed starch granules varying in size from less than 1 μm to more than 100 μm. The granule size is an important factor affecting the functional properties and the applicability of starch for food and non-food applications. Within the same botanical species, the range of starch granule size can be up to sevenfold. This review critically evaluated the biological and environmental factors affecting the size of starch granules, the methods for the separation of starch granules and the measurement of size distribution. Further, the structure at different length scales and properties of starch-based on the granule size is elucidated by specifying the typical applications of granules with varying sizes. An amylopectin cluster model showing the arrangement of amylopectin from inside toward the granule surface is proposed with the hypothesis that the steric hindrance for the growth of lamellar structure may limit the size of starch granules.

Nitrogen Fertilizer Regulated Grain Storage Protein Synthesis and Reduced Chalkiness of Rice Under Actual Field Warming

Our previous study has shown that nitrogen plays an important role in dealing with significantly increased chalkiness caused by elevated temperature. However, the role of nitrogen metabolites has not been given sufficient attention, and its regulatory mechanism is not clear. This study investigated the effects of high temperature and nitrogen fertilizer on the synthesis of grain storage protein and further explored the quality mechanism under the actual scenario of field warming. Results showed that increased temperature and nitrogen fertilizer could affect the activities of nitrogen metabolism enzymes, namely, glutamate synthetase, glutamine synthetase, glutamic pyruvic transaminase, and glutamic oxaloacetic transaminase, and the expressions of storage protein synthesis factor genes, namely, GluA and GluB, and subfamily genes, namely, pro14, BiP1, and PDIL1, which co-induced the changes of storage protein synthesis in rice grains. Furthermore, the increased temperature changed the balance of grain storage substances which may lead to the significantly increased chalky rate (197.67%) and chalkiness (532.92%). Moreover, there was a significant negative correlation between prolamin content and chalkiness, indicating that nitrogen fertilizer might regulate the formation of chalkiness by affecting the synthesis of prolamin. Results suggested that nitrogen application could regulate the related core factors involved in nitrogen metabolism pathways, which, in turn, affects the changes in the storage protein components in the grain and further affects quality. Therefore, as a conventional cultivation measure, nitrogen application would have a certain value in future rice production in response to climate warming.

Diverse effects of nitrogen fertilizer on the structural, pasting, and thermal properties of common buckwheat starch

At present, the yield of common buckwheat, which is mainly grown in northern Shaanxi of China, is low and the grain quality is poor. Nitrogen is an important nutrient for the growth of common buckwheat, and appropriate nitrogen application can improve the grain quality. Nitrogen fertilizer could alter the starch granule morphology shapes and the granule size distribution. With increasing nitrogen levels, branch number, flower clusters number, grain number per plant, contents of protein and fat, size distribution of "C" granules, and percentages of light transmittance significantly increased, whereas amylose content and retrogradation decreased. All the samples displayed typical A-type X-ray diffraction patterns. Starch showed higher pasting temperature and gelatinization enthalpy but lower trough and final viscosities under high nitrogen levels. These results suggested N₂ treatment was more suitable for common buckwheat growth, principal components and correlation analysis revealed that nitrogen fertilizer significantly affected the physicochemical properties of common buckwheat starches.

Partial substitution of organic nitrogen with synthetic nitrogen enhances rice yield, grain starch metabolism and related genes expression under the dual cropping system

Improving grain filling in the presernt farming systems is crucial where grain filling is a concern due to the extreme use of chemical fertilizers (CF). A field experiment was conducted at the experimental station of Guangxi University, China in 2019 to test the hypothesis that cattle manure (CM) and poultry manure (PM) combined with CF could improve rice grain filling rate, yield, biochemical and qualitative attributes. A total of six treatments, i.e., no fertilizer (T₁), 100% CF (T₂), 60% CM + 40% CF (T₃), 30% CM + 70% CF (T₄), 60% PM + 40% CF (T₅), and 30% PM + 70% CF (T₆) were used in this study. Results showed that the combined treatment T₆increased starch metabolizing enzymes activity (SMEs), such as ADP-glucose phosphorylase (ADGPase) by 8 and 12%, soluble starch synthase (SSS) by 7 and 10%, granule bound starch synthesis (GBSS) by 7 and 9%, and starch branching enzyme (SBE) by 14 and 21% in the early and late seasons, respectively, compared with T₂. Similarly, higher rice grain yield, grain filling rate, starch, and amylose content were also recorded in combined treatments. In terms of seasons, higher activity of SMEs , grain starch, and amylose content was noted in the late-season compared to the early season. The increment in these traits was mainly attributed to a lower temperature in the late season during the grain filling period. Furthermore, our results suggested that an increment in starch accumulation and grain filling rate were mainly associated with the enhanced sink capacity by regulating key enzyme activities involved in Suc-to-starch conversion. In-addition, RT-qPCR analysis showed higher expression levels of AGPS2b, SSS1, GBSS1, and GBSE11b genes, which resultantly increased the activities of SMEs during the grain filling period under combined treatments. Linear regression analysis revealed that the activity of ADGPase, SSS, GBSS, and SBE were highly positively correlated with starch and amylose accumulation. Thus, we concluded that a combination of 30% N from PM or CM with 70% N from CF is a promising option in terms of improving rice grain yield and quality. Our study provides a sustainable fertilizer management strategy to enhance rice grain yield and quality at the lowest environmental cost.

Relationship between chalkiness and the structural and thermal properties of rice starch after shading during grain-filling stage

Chalkiness is a major concern in rice production and its acceptance and is increased by shade stress. However, the relationship between rice chalkiness and the structural and thermal properties of starch is unclear. Here, we investigated the effect of shade stress on rice starch properties. The chalky grain rate and chalkiness degree significantly decreased with the amylose content, Mn, and ΔH and increased with surface area- and volume-weighted mean diameters, branching degree, ratio of 1022/995 cm^-1, and molecular weight polydispersity. Shade stress significantly increased the volume- and surface area-weighted mean diameters and Mw and decreased the amylose content, A chain proportion of amylopectin, Mn, and regularity of starch. These effects led to an increase in the molecular weight polydispersity and branching degree and a decrease in the crystallinity degree and 1045/1022 cm^-1 ratio, thereby reducing starch ΔH and uniformity. These factors contributed to increased chalkiness of rice under shade stress.