1
|
Fu C, Tian G, He S, Yao L, Guo Z. Hydrogel Coated Mesh with Controlled Flux for Oil/Water Separation. ACS APPLIED MATERIALS & INTERFACES 2024; 16:37757-37769. [PMID: 39001806 DOI: 10.1021/acsami.4c08781] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/15/2024]
Abstract
Superwetting surfaces are often applied in oil/water separation. Hydrogels have been widely prepared as superhydrophilic/underwater superoleophobic materials for oil/water separation since they are naturally hydrophilic. Hydrogels usually need to be combined with porous substrates such as stainless steel mesh (SSM) due to their poor mechanical properties. However, it is usually inevitable that the pores of the substrate are clogged during the actual preparation process, leading to a significant decrease in the flux, which limits its effective application. In this study, acrylic acid (AA), chitosan (CS) and modified silica were utilized to form a layer of dual-network PAA/CS@SiO2 hydrogel by photopolymerization on SSM, followed by a simple and novel ultrasonic-assisted pore-making method to generate numerous pores in situ on the surface of the hydrogel-coated mesh, which led to an increase in water flux from 0 to 70,000 L m-2 h-1 without decreasing the separation efficiency. After 100 separations of a mixture of n-hexane and water, the flux was still higher than 50,000 L m-2 h-1 with a separation efficiency above 99%, which is superior to most of hydrogel-coated meshes reported so far. Moreover, the prepared PAA/CS@SiO2 hydrogel-coated mesh also has good environmental stability, low swelling, and self-cleaning properties. We believe that the strategy of this study will provide a simple new perspective when hydrogels block the substrate pores, resulting in low water flux.
Collapse
Affiliation(s)
- Changhui Fu
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
| | - Guangyi Tian
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
| | - Shiping He
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
| | - Li Yao
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
| | - Zhiguang Guo
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, People's Republic of China
| |
Collapse
|
2
|
Li Y, Li S. Ultra-warm artificial aerogel fibers: a biomimetic material based on polar bear hair. Chin J Nat Med 2024; 22:481-482. [PMID: 38906595 DOI: 10.1016/s1875-5364(24)60597-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/02/2024] [Indexed: 06/23/2024]
Affiliation(s)
- Yu Li
- State Key Laboratory of Natural Medicines, Jiangsu Key Laboratory of Drug Screening, Department of Biomedical Engineering, School of Engineering, China Pharmaceutical University, Nanjing 211198, China
| | - Siwen Li
- State Key Laboratory of Natural Medicines, Jiangsu Key Laboratory of Drug Screening, Department of Biomedical Engineering, School of Engineering, China Pharmaceutical University, Nanjing 211198, China.
| |
Collapse
|
3
|
Duarte H, Aliaño-González MJ, Romano A, Medronho B. Advancements in Detection and Mitigation Strategies for Petroleum-Derived Contaminants in Aquatic Environments: A Comprehensive Review. SENSORS (BASEL, SWITZERLAND) 2024; 24:3284. [PMID: 38894076 PMCID: PMC11174374 DOI: 10.3390/s24113284] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/26/2024] [Revised: 05/15/2024] [Accepted: 05/20/2024] [Indexed: 06/21/2024]
Abstract
The exponential increase in the production and transportation of petroleum-derived products observed in recent years has been driven by the escalating demand for energy, textiles, plastic-based materials, and other goods derived from petroleum. Consequently, there has been a corresponding rise in spills of these petroleum derivatives, particularly in water sources utilized for transportation or, occasionally, illegally utilized for tank cleaning or industrial equipment maintenance. Numerous researchers have proposed highly effective techniques for detecting these products, aiming to facilitate their cleanup or containment and thereby minimize environmental pollution. However, many of these techniques rely on the identification of individual compounds, which presents significant drawbacks, including complexity of handling, subjectivity, lengthy analysis times, infeasibility for in situ analysis, and high costs. In response, there has been a notable surge in the utilization of sensors or generalized profiling techniques serving as sensors to generate characteristic fingerprints of these products, thereby circumventing the aforementioned disadvantages. This review comprehensively examines the evolution of techniques employed for detecting petroleum-derived products in water samples, along with their associated advantages and disadvantages. Furthermore, the review examines current perspectives on methods for the removal and/or containment of these products from water sources, to minimize their environmental impact and the associated health repercussions on living organisms and ecosystems.
Collapse
Affiliation(s)
- Hugo Duarte
- MED—Mediterranean Institute for Agriculture, Environment and Development, CHANGE—Global Change and Sustainability Institute, Faculdade de Ciências e Tecnologia, Universidade do Algarve, Campus de Gambelas, Ed. 8, 8005-139 Faro, Portugal; (H.D.); (A.R.); (B.M.)
| | - María José Aliaño-González
- MED—Mediterranean Institute for Agriculture, Environment and Development, CHANGE—Global Change and Sustainability Institute, Faculdade de Ciências e Tecnologia, Universidade do Algarve, Campus de Gambelas, Ed. 8, 8005-139 Faro, Portugal; (H.D.); (A.R.); (B.M.)
- Departamento de Química Analítica, Facultad de Ciencias, Universidad de Cádiz, 11510 Cadiz, Spain
| | - Anabela Romano
- MED—Mediterranean Institute for Agriculture, Environment and Development, CHANGE—Global Change and Sustainability Institute, Faculdade de Ciências e Tecnologia, Universidade do Algarve, Campus de Gambelas, Ed. 8, 8005-139 Faro, Portugal; (H.D.); (A.R.); (B.M.)
| | - Bruno Medronho
- MED—Mediterranean Institute for Agriculture, Environment and Development, CHANGE—Global Change and Sustainability Institute, Faculdade de Ciências e Tecnologia, Universidade do Algarve, Campus de Gambelas, Ed. 8, 8005-139 Faro, Portugal; (H.D.); (A.R.); (B.M.)
| |
Collapse
|
4
|
Wang S, Zeng J, Li P, Li J, Wang B, Gao W, Xu J. High-strength hydrophilic N-halamines chitosan and cellulose nanofibers membranes with repeated bactericidal properties. Int J Biol Macromol 2023; 253:127065. [PMID: 37748591 DOI: 10.1016/j.ijbiomac.2023.127065] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/12/2023] [Revised: 09/14/2023] [Accepted: 09/22/2023] [Indexed: 09/27/2023]
Abstract
Direct addition of disinfectants and membrane separation techniques have been common methods to address microbial contamination in water. However, disinfectants may generate toxic by-products, and even minor damage or biofilm formation on filtration membranes can lead to a heightened risk of microbial contamination. Consequently, how to quickly and safely disinfect microbial contaminated water sources remains a huge challenge. In this study, the high-strength broad-spectrum antibacterial CNF/CS composite membrane was fabricated by utilizing cellulose nanofibers (CNF) to reinforce the structure of chitosan (CS). The resulting CNF/CS composite membrane exhibits an impressive tensile strength of 148 MPa and boasts an active chlorine content of 5.29 %. Notably, even after undergoing 50 washing cycles and 10 repeated chlorination procedures, the structural integrity and high active chlorine content of the composite membrane remain preserved, validating its exceptional strength, stability, and chlorine rechargeability. Additionally, the CNF/CS antibacterial materials demonstrate remarkable attributes in terms of rapid sterilization, sustained and consistent release of active chlorine, and efficient inhibition of biofilm formation, demonstrating great potential in efficient, green, and safe sterilization.
Collapse
Affiliation(s)
- Shuxiu Wang
- Plant Fiber Research Center, State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510640, China; Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, Guangzhou 510006, China
| | - Jinsong Zeng
- Plant Fiber Research Center, State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510640, China; Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, Guangzhou 510006, China.
| | - Pengfei Li
- Plant Fiber Research Center, State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510640, China; Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, Guangzhou 510006, China; School of Environment and Energy, South China University of Technology, Guangzhou 510640, China.
| | - Jinpeng Li
- Plant Fiber Research Center, State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510640, China; Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, Guangzhou 510006, China
| | - Bin Wang
- Plant Fiber Research Center, State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510640, China; Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, Guangzhou 510006, China
| | - Wenhua Gao
- Plant Fiber Research Center, State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510640, China; Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, Guangzhou 510006, China
| | - Jun Xu
- Plant Fiber Research Center, State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510640, China; Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, Guangzhou 510006, China
| |
Collapse
|
5
|
Singhal K, Mazeed T, Demirel MC. Cephalopod inspired self-healing protein foams for oil-water separation. iScience 2023; 26:108300. [PMID: 38187193 PMCID: PMC10767161 DOI: 10.1016/j.isci.2023.108300] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/02/2023] [Revised: 09/07/2023] [Accepted: 10/19/2023] [Indexed: 01/09/2024] Open
Abstract
Cephalopods are remarkable creatures, captivating scientists with their advanced neurophysiology, complex behavior, and miraculously effective camouflage. Research into cephalopods has led to many discoveries in neuroscience, cell biology, and materials science. Specifically, squids provide us with remarkable self-healing Squid Ring Teeth protein, which is applied herein to extend the life span of foams. Despite the advantages of porosity in surface science applications, porosity impairs mechanical properties by making materials more prone to structural damage -which traditional polymeric foams also suffer from. Drawing inspiration from Squid Ring Teeth, we developed self-healing tandem repeat proteins to overcome these challenges. By leveraging porosity and self-healing properties inspired by Squid Ring Teeth, we created bioengineered protein foams with high separation capacity (5.1 g g-1) and efficiency (≈94%). The foams healed entirely within minutes which regained over 100% strength after repair. These advances promise applications for efficient continuous water treatment through durable filter cartridges.
Collapse
Affiliation(s)
- Khushank Singhal
- Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA 16802, USA
| | - Tarek Mazeed
- Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA 16802, USA
- Huck Institutes of Life Sciences, The Pennsylvania State University, University Park, PA 16802, USA
| | - Melik C. Demirel
- Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA 16802, USA
- Huck Institutes of Life Sciences, The Pennsylvania State University, University Park, PA 16802, USA
- Materials Research Institute, The Pennsylvania State University, University Park, PA 16802, USA
| |
Collapse
|
6
|
Ganguly A, Nag S, Gayen K. Synthesis of cellulosic and nano-cellulosic aerogel from lignocellulosic materials for diverse sustainable applications: a review. Prep Biochem Biotechnol 2023; 54:419-434. [PMID: 37603307 DOI: 10.1080/10826068.2023.2245875] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 08/22/2023]
Abstract
Cellulosic aerogels are sustainable, biodegradable, and ultra-light porous materials with three-dimensional networks having high specific surface area. Depending on the source of precursor materials, they are categorized into plant-based aerogel, bacterial cellulosic aerogel. Different types of aerogels are also produced from microcrystalline cellulose (MCC), nanocrystalline cellulose (NCC), cellulose microfibril (CMF) and cellulose nanofibril (CNF). Furthermore, inorganic and organic substances are embedded to produce hybrid aerogel or composite aerogel for the enhancement of its performance in various fields. Mixing, gelation, solvent exchange, and drying (e.g., super critical carbon dioxide or freeze drying) are the basic steps involved in cellulosic aerogel synthesis. Based on the composition of precursors during aerogel synthesis, cellulosic aerogels have broad applications in various fields such as adsorbents, electrodes, sensors, captive deionization materials, catalysts, drug delivery, thermal and sound insulating materials. This review provided consolidated information on: (i) classification of cellulosic aerogels based on the sources of raw materials, (ii) processes involved to produce the cellulosic aerogel, (iii) cellulosic aerogel synthesized from MCC, NCC, CMF and CNF, (iv) nano particle doped cellulosic aerogel, and (v) its application in various field with future perspectives.
Collapse
Affiliation(s)
- Anisha Ganguly
- Department of Chemical Engineering, National Institute of Technology, Agartala, India
| | - Soma Nag
- Department of Chemical Engineering, National Institute of Technology, Agartala, India
| | - Kalyan Gayen
- Department of Chemical Engineering, National Institute of Technology, Agartala, India
| |
Collapse
|
7
|
Pan N, Xue Y, Xu Z, Long Z, Li Z, Wang Y, Gu X. Durable and rechargeable antimicrobial cotton driven by enhanced UV stability and real-time detection of biocidal factors. Int J Biol Macromol 2023; 245:125577. [PMID: 37379944 DOI: 10.1016/j.ijbiomac.2023.125577] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/02/2023] [Revised: 06/12/2023] [Accepted: 06/24/2023] [Indexed: 06/30/2023]
Abstract
In this study, graphene oxide/N-halamine nanocomposite was synthesized through Pickering miniemulsion polymerization, which was then coated on cotton surface. The modified cotton exhibited excellent superhydrophobicity, which could effectively prevent microbial infestation and reduce the probability of hydrolysis of active chlorine, with virtually no active chlorine released in water after 72 h. Deposition of reduced graphene oxide nanosheets endowed cotton with ultraviolet-blocking properties, attributing to enhanced UV adsorption and long UV paths. Moreover, encapsulation of polymeric N-halamine resulted in improved UV stability, thus extending the life of N-halamine-based agents. After 24 h of irradiation, 85 % of original biocidal component (active chlorine content) was retained, and approximately 97 % of initial chlorine could be regenerated. Modified cotton has been proven to be an effective oxidizing material against organic pollutants and a potential antimicrobial substance. Inoculated bacteria were completely killed after 1 and 10 min of contact time, respectively. An innovative and simple scheme for determination of active chlorine content was also devised, and real-time inspection of bactericidal activity could be achieved to assure antimicrobial sustainability. Moreover, this method could be utilized to evaluate hazard classification of microbial contamination in different locations, thus broadening the application scope of N-halamine-based cotton fabrics.
Collapse
Affiliation(s)
- Nengyu Pan
- Key Laboratory of Clean Dyeing and Finishing Technology of Zhejiang Province, Shaoxing University, Shaoxing 312000, China; Key Laboratory of Eco-textiles, Ministry of Education, College of Textiles and Clothing, Jiangnan University, Wuxi 214122, Jiangsu, China.
| | - Yuting Xue
- Key Laboratory of Clean Dyeing and Finishing Technology of Zhejiang Province, Shaoxing University, Shaoxing 312000, China
| | - Zefeng Xu
- Key Laboratory of Clean Dyeing and Finishing Technology of Zhejiang Province, Shaoxing University, Shaoxing 312000, China
| | - Zhu Long
- Key Laboratory of Eco-textiles, Ministry of Education, College of Textiles and Clothing, Jiangnan University, Wuxi 214122, Jiangsu, China.
| | - Zhiguang Li
- Key Laboratory of Eco-textiles, Ministry of Education, College of Textiles and Clothing, Jiangnan University, Wuxi 214122, Jiangsu, China
| | - Yingfeng Wang
- College of Textiles and Garments, Anhui Polytechnic University, Wuhu, Anhui 241000, China
| | - Xiangjun Gu
- Shaoxing Shengmiao Knitting Co. Ltd., Shaoxing 312000, Zhejiang, China
| |
Collapse
|
8
|
Wang Q, Zuo W, Tian Y, Kong L, Cai G, Zhang H, Li L, Zhang J. An ultralight and flexible nanofibrillated cellulose/chitosan aerogel for efficient chromium removal: Adsorption-reduction process and mechanism. CHEMOSPHERE 2023; 329:138622. [PMID: 37037357 DOI: 10.1016/j.chemosphere.2023.138622] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/27/2022] [Revised: 04/03/2023] [Accepted: 04/04/2023] [Indexed: 05/03/2023]
Abstract
Heavy metals in water are critical global environmental problems. In particular, the anionic heavy metal chromium (Cr) has carcinogenic and genotoxic risks on human health. To this end, an ultralight and flexible nanofibrillated cellulose (NFC)/chitosan (CS) aerogel was developed only by freeze-drying combined with physical thermal cross-linking for efficient one step co-removal of Cr(VI) and Cr(III). The maximum adsorption capacity of Cr(VI) and total Cr calculated according to the Langmuir model was 197.33 and 134.12 mg/g, respectively. Even in the presence of competing soluble organics, anions and oil contaminants, the resulting NFC/CS-5 aerogels showed excellent selectivity. The aerogel exhibited outstanding mechanical integrity, remaining intact after 17 compressions in air and underwater. Meanwhile, after 5 adsorption-desorption cycles, the aerogel was easy to regenerate and maintained a high regeneration efficiency of 80.25%. Importantly, self-assembled NFC/CS-5 aerogel filter connected with the peristaltic pump could purify 752 mL of industrial wastewater with Cr(VI) pre-concentration capacity of 49.71 mg/g. XPS and FT-IR verified that electrostatic interactions, reduction and complexation acted as the main driving forces for the adsorption process. Moreover, such aerogel possessed broad application prospects for alleviating heavy metal pollution in agriculture.
Collapse
Affiliation(s)
- Qinyu Wang
- State Key Laboratory of Urban Water Resource and Environment (SKLUWRE), School of Environment, Harbin Institute of Technology, Harbin, 150090, China
| | - Wei Zuo
- State Key Laboratory of Urban Water Resource and Environment (SKLUWRE), School of Environment, Harbin Institute of Technology, Harbin, 150090, China.
| | - Yu Tian
- State Key Laboratory of Urban Water Resource and Environment (SKLUWRE), School of Environment, Harbin Institute of Technology, Harbin, 150090, China
| | - Lingchao Kong
- State Environmental Protection Key Laboratory of Integrated Surface Water-Groundwater Pollution Control, School of Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen, China
| | - Guiyuan Cai
- State Key Laboratory of Urban Water Resource and Environment (SKLUWRE), School of Environment, Harbin Institute of Technology, Harbin, 150090, China
| | - Haoran Zhang
- State Key Laboratory of Urban Water Resource and Environment (SKLUWRE), School of Environment, Harbin Institute of Technology, Harbin, 150090, China
| | - Lipin Li
- State Key Laboratory of Urban Water Resource and Environment (SKLUWRE), School of Environment, Harbin Institute of Technology, Harbin, 150090, China
| | - Jun Zhang
- State Key Laboratory of Urban Water Resource and Environment (SKLUWRE), School of Environment, Harbin Institute of Technology, Harbin, 150090, China
| |
Collapse
|
9
|
Varamesh A, Abraham BD, Wang H, Berton P, Zhao H, Gourlay K, Minhas G, Lu Q, Bryant SL, Hu J. Multifunctional fully biobased aerogels for water remediation: Applications for dye and heavy metal adsorption and oil/water separation. JOURNAL OF HAZARDOUS MATERIALS 2023; 457:131824. [PMID: 37327610 DOI: 10.1016/j.jhazmat.2023.131824] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/29/2023] [Revised: 05/16/2023] [Accepted: 06/08/2023] [Indexed: 06/18/2023]
Abstract
Water ecosystem contamination from industrial pollutants is an emerging threat to both humans and native species, making it a point of global concern. In this work, fully biobased aerogels (FBAs) were developed by using low-cost cellulose filament (CF), chitosan (CS), citric acid (CA), and a simple and scalable approach, for water remediation applications. The FBAs displayed superior mechanical properties (up to ∼65 kPa m3 kg-1 specific Young's modulus and ∼111 kJ/m3 energy absorption) due to CA acting as a covalent crosslinker in addition to the natural hydrogen bonding and electrostatic interactions between CF and CS. The addition of CS and CA increased the variety of functional groups (carboxylic acid, hydroxyl and amines) on the materials' surface, resulting in super-high dye and heavy metal adsorption capacities (619 mg/g and 206 mg/g for methylene blue and copper, respectively). Further modification of FBAs with a simple approach using methyltrimethoxysilane endowed aerogel oleophilic and hydrophobic properties. The developed FBAs showed a fast performance in water and oil/organic solvents separation with more than 96% efficiency. Besides, the FBA sorbents could be regenerated and reused for multiple cycles without any significant impact on their performance. Moreover, thanks to the presence of amine groups by addition of CS, FBAs also displayed antibacterial properties by preventing the growth of Escherichia coli on their surface. This work demonstrates the preparation of FBAs from abundant, sustainable, and inexpensive natural resources for applications in wastewater purification.
Collapse
Affiliation(s)
- Amir Varamesh
- Department of Chemical and Petroleum Engineering, University of Calgary, Calgary T2N 1N4, Canada
| | - Brett David Abraham
- Department of Biomedical Engineering, University of Calgary, Calgary T2N 1N4, Canada; Pharmaceutical Production Research Facility, University of Calgary, Calgary T2N 1N4, Canada
| | - Hui Wang
- Department of Chemical and Petroleum Engineering, University of Calgary, Calgary T2N 1N4, Canada
| | - Paula Berton
- Department of Chemical and Petroleum Engineering, University of Calgary, Calgary T2N 1N4, Canada
| | - Heng Zhao
- Department of Chemical and Petroleum Engineering, University of Calgary, Calgary T2N 1N4, Canada
| | - Keith Gourlay
- Performance BioFilaments, 700 West Pender Street, Vancouver V6C 1G8, Canada
| | - Gurminder Minhas
- Performance BioFilaments, 700 West Pender Street, Vancouver V6C 1G8, Canada
| | - Qingye Lu
- Department of Chemical and Petroleum Engineering, University of Calgary, Calgary T2N 1N4, Canada
| | - Steven L Bryant
- Department of Chemical and Petroleum Engineering, University of Calgary, Calgary T2N 1N4, Canada.
| | - Jinguang Hu
- Department of Chemical and Petroleum Engineering, University of Calgary, Calgary T2N 1N4, Canada.
| |
Collapse
|
10
|
Zhao J, Yuan X, Wu X, Liu L, Guo H, Xu K, Zhang L, Du G. Preparation of Nanocellulose-Based Aerogel and Its Research Progress in Wastewater Treatment. Molecules 2023; 28:molecules28083541. [PMID: 37110772 PMCID: PMC10144172 DOI: 10.3390/molecules28083541] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/22/2023] [Revised: 04/12/2023] [Accepted: 04/14/2023] [Indexed: 04/29/2023] Open
Abstract
Nowadays, the fast expansion of the economy and industry results in a considerable volume of wastewater being released, severely affecting water quality and the environment. It has a significant influence on the biological environment, both terrestrial and aquatic plant and animal life, and human health. Therefore, wastewater treatment is a global issue of great concern. Nanocellulose's hydrophilicity, easy surface modification, rich functional groups, and biocompatibility make it a candidate material for the preparation of aerogels. The third generation of aerogel is a nanocellulose-based aerogel. It has unique advantages such as a high specific surface area, a three-dimensional structure, is biodegradable, has a low density, has high porosity, and is renewable. It has the opportunity to replace traditional adsorbents (activated carbon, activated zeolite, etc.). This paper reviews the fabrication of nanocellulose-based aerogels. The preparation process is divided into four main steps: the preparation of nanocellulose, gelation of nanocellulose, solvent replacement of nanocellulose wet gel, and drying of nanocellulose wet aerogel. Furthermore, the research progress of the application of nanocellulose-based aerogels in the adsorption of dyes, heavy metal ions, antibiotics, organic solvents, and oil-water separation is reviewed. Finally, the development prospects and future challenges of nanocellulose-based aerogels are discussed.
Collapse
Affiliation(s)
- Jiaxin Zhao
- Yunnan Provincial Key Laboratory of Wood Adhesives and Glued Products, Southwest Forestry University, Kunming 650224, China
| | - Xushuo Yuan
- Yunnan Provincial Key Laboratory of Wood Adhesives and Glued Products, Southwest Forestry University, Kunming 650224, China
| | - Xiaoxiao Wu
- Yunnan Provincial Key Laboratory of Wood Adhesives and Glued Products, Southwest Forestry University, Kunming 650224, China
| | - Li Liu
- Yunnan Provincial Key Laboratory of Wood Adhesives and Glued Products, Southwest Forestry University, Kunming 650224, China
| | - Haiyang Guo
- Jiaxing Key Laboratory of Molecular Recognition and Sensing, College of Biological, Chemical Sciences and Engineering, Jiaxing University, Jiaxing 314001, China
| | - Kaimeng Xu
- Yunnan Provincial Key Laboratory of Wood Adhesives and Glued Products, Southwest Forestry University, Kunming 650224, China
| | - Lianpeng Zhang
- Yunnan Provincial Key Laboratory of Wood Adhesives and Glued Products, Southwest Forestry University, Kunming 650224, China
| | - Guanben Du
- Yunnan Provincial Key Laboratory of Wood Adhesives and Glued Products, Southwest Forestry University, Kunming 650224, China
| |
Collapse
|
11
|
Hao M, Zhang T, Hu X, Chen Z, Yang B, Wang X, Liu Y, Wang R, Liu Y. Facile, green and scalable preparation of low-cost PET-PVDF felts for oil absorption and oil/water separation. JOURNAL OF HAZARDOUS MATERIALS 2023; 448:130804. [PMID: 36724629 DOI: 10.1016/j.jhazmat.2023.130804] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/06/2022] [Revised: 12/26/2022] [Accepted: 01/14/2023] [Indexed: 06/18/2023]
Abstract
3D felt materials with pore structures have the advantages of high absorption performance and recyclability in oily wastewater treatment and chemical leakage. However, most of them were fabricated using either toxic organic solvents or complicated procedures. Herein, we report a facile, green, and scalable route for the fabrication of 3D composite felts with large pore structures by sequentially stirring and heating polyethylene terephthalate (PET) fibers and polyvinylidene fluoride (PVDF). The resulting PET-PVDF felt exhibits high oil absorption capacity to a variety of oil and organic solvents with a maximum saturated absorption capacity of 32 g/g. Additionally, it can be used to separate oil/water mixtures with a separation efficiency of 99.9% and separation flux of 89570 L m-2 h-1. Moreover, this felt shows excellent mechanical durability and chemical stability under acid, base, salt solution, and other harsh environments. The current study provides a promising approach for large-scale industrial oily wastewater separation.
Collapse
Affiliation(s)
- Ming Hao
- School of Textile Science and Engineering, State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan, Hubei 430200, China; School of Textile Science and Engineering, State Key Laboratory of Separation Membranes and Membrane Processes, Tiangong University, Tianjin 300387, China
| | - Tianyi Zhang
- School of Textile Science and Engineering, State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan, Hubei 430200, China
| | - Xiaodong Hu
- School of Textile Science and Engineering, State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan, Hubei 430200, China; School of Textile Science and Engineering, State Key Laboratory of Separation Membranes and Membrane Processes, Tiangong University, Tianjin 300387, China
| | - Zhijun Chen
- School of Textile Science and Engineering, State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan, Hubei 430200, China; School of Textile Science and Engineering, State Key Laboratory of Separation Membranes and Membrane Processes, Tiangong University, Tianjin 300387, China
| | - Bo Yang
- School of Textile Science and Engineering, State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan, Hubei 430200, China
| | - Xiaoxiao Wang
- School of Textile Science and Engineering, State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan, Hubei 430200, China
| | - Yanbo Liu
- School of Textile Science and Engineering, State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan, Hubei 430200, China; School of Textile Science and Engineering, State Key Laboratory of Separation Membranes and Membrane Processes, Tiangong University, Tianjin 300387, China.
| | - Run Wang
- School of Textile Science and Engineering, State Key Laboratory of Separation Membranes and Membrane Processes, Tiangong University, Tianjin 300387, China.
| | - Yong Liu
- School of Textile Science and Engineering, State Key Laboratory of Separation Membranes and Membrane Processes, Tiangong University, Tianjin 300387, China.
| |
Collapse
|
12
|
Zhai G, Wu J, Yuan Z, Li H, Sun D. Robust Superhydrophobic PDMS@SiO 2@UiO66-OSiR Sponge for Efficient Water-in-Oil Emulsion Separation. Inorg Chem 2023; 62:5447-5457. [PMID: 36961917 DOI: 10.1021/acs.inorgchem.2c03887] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/26/2023]
Abstract
A major challenge in oil/water separation is the processing of surfactant-stabilized emulsions from the water medium. One of the feasible schemes of emulsion separation is the porous melamine sponge coupled with functional particles. Here, we proposed a novel superhydrophobic metal-organic framework (MOF)-based sponge for water-in-oil emulsion separation. The porous melamine sponge was combined with poly(dimethylsiloxane) (PDMS)-coated hydrophobic SiO2 and UiO66-OSiR particles were prepared for demulsification via the one-step dipping method for the first time. The PDMS@SiO2@UiO66-OSiR sponge revealed excellent superhydrophobicity at a water contact angle of 160.7° and superlipophilicity at an oil contact angle of 0°. Compared with the pristine melamine sponge, the size-controllable PDMS@SiO2@UiO66-OSiR sponge could separate stabilized water-in-oil emulsions with ultrahigh separation efficiency (>98.64%) and high flux (e.g., 970 L·m-2·h-1). Meanwhile, the PDMS@SiO2@UiO66-OSiR sponge exhibited superior durability and mechanical reusability. Under harsh conditions such as strong acid and alkali, organic solvent corrosion, etc., all water contact angles of the PDMS@SiO2@UiO66-OSiR sponge were over 152°. Furthermore, the stress decreased by 5% when the sponge was subjected to 10 loading/unloading compression cycles at a constant strain of 60%. These results demonstrate that the PDMS@SiO2@UiO66-OSiR sponge can efficiently separate water-in-oil emulsions through its adjustable porous structure coupled with demulsification and hydrophobic particles. This study provides a step forward in developing a feasible strategy for the MOF-based sponge for emulsion separation.
Collapse
Affiliation(s)
- Guanzhong Zhai
- Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, P. R. China
| | - Junwei Wu
- Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, P. R. China
| | - Zhuorui Yuan
- Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, P. R. China
| | - Hongmei Li
- Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, P. R. China
| | - Daohua Sun
- Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, P. R. China
| |
Collapse
|
13
|
Biodegradable polymers – research and applications. PHYSICAL SCIENCES REVIEWS 2023. [DOI: 10.1515/psr-2022-0217] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/25/2023]
Abstract
Abstract
The major concern in ecology we are facing in this era of modernization is environmental pollution due to non-biodegradable plastics. Because of its low cost, readily available nature, light weight, corrosion resistance, and added additives, it is adaptable and suitable for a wide range of applications. But the problem is that most of the petroleum-based plastics are not recyclable. Recycling and degradation of plastics are time-consuming and also release harmful chemicals, which pose a great threat to the environment. It is the need of the modern era to focus on the production of biodegradable and eco-friendly polymers as alternatives to these plastics. Nowadays, plant-based polymers are coming onto the market, which are easily degraded into soil with the help of microorganisms. However, commercialization is less due to its high production costs and the requirement for large agricultural lands for production, and their degradation also necessitated the use of special composting techniques. It is urgently needed to produce good quality and a high quantity of biodegradable polymers. The microorganisms are often searched for and screened from the carbon-rich and nutrient-deficient environment, but the commercial value of the polymers from microorganisms is very costly. Moreover, the currently explored microbes like Ralstonia eutropha, Aspergillus eutrophus, Cupriavidus necator, etc. are producing polymers naturally as a carbon reserve. But the quality as well as quantity of production are low, which means they cannot meet our requirements. So, the main aim of this chapter is to focus on the wide applications of different biodegradable polymers from plants, animals and even microbes and recent advancements in their production and improvement of biopolymers to increase their quality and quantity from natural sources, as well as their applications in packaging, the medical field, aquaculture, and other various fields for the commercialization of the product.
Collapse
|
14
|
Lyu P, Xia L, Liu X, Hurren C, Xu W, Wang X. Self-cleaning superhydrophobic aerogels from waste hemp noil for ultrafast oil absorption and highly efficient PM removal. Sep Purif Technol 2023. [DOI: 10.1016/j.seppur.2022.122503] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
|
15
|
Wang B, Qiu S, Chen Z, Hu Y, Shi G, Zhuo H, Zhang H, Zhong L. Assembling nanocelluloses into fibrous materials and their emerging applications. Carbohydr Polym 2023; 299:120008. [PMID: 36876760 DOI: 10.1016/j.carbpol.2022.120008] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/06/2022] [Revised: 08/07/2022] [Accepted: 08/16/2022] [Indexed: 11/29/2022]
Abstract
Nanocelluloses, derived from various plants or specific bacteria, represent the renewable and sophisticated nano building blocks for emerging functional materials. Especially, the assembly of nanocelluloses as fibrous materials can mimic the structural organization of their natural counterparts to integrate various functions, thus holding great promise for potential applications in various fields, such as electrical device, fire retardance, sensing, medical antibiosis, and drug release. Due to the advantages of nanocelluloses, a variety of fibrous materials have been fabricated with the assistance of advanced techniques, and their applications have attracted great interest in the past decade. This review begins with an overview of nanocellulose properties followed by the historical development of assembling processes. There will be a focus on assembling techniques, including traditional methods (wet spinning, dry spinning, and electrostatic spinning) and advanced methods (self-assembly, microfluidic, and 3D printing). In particular, the design rules and various influencing factors of assembling processes related to the structure and function of fibrous materials are introduced and discussed in detail. Then, the emerging applications of these nanocellulose-based fibrous materials are highlighted. Finally, some perspectives, key opportunities, and critical challenges on future research trends within this field are proposed.
Collapse
Affiliation(s)
- Bing Wang
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China
| | - Shuting Qiu
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China
| | - Zehong Chen
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China
| | - Yijie Hu
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China
| | - Ge Shi
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China
| | - Hao Zhuo
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China
| | - Huili Zhang
- Department of Neurology, Guangzhou First People's Hospital, School of Medicine, South China University of Technology, Guangzhou 510180, China.
| | - Linxin Zhong
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China.
| |
Collapse
|
16
|
Tan Z, Hu L, Yang D, Zheng D, Qiu X. Lignin: Excellent hydrogel swelling promoter used in cellulose aerogel for efficient oil/water separation. J Colloid Interface Sci 2023; 629:422-433. [DOI: 10.1016/j.jcis.2022.08.185] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/28/2022] [Revised: 08/28/2022] [Accepted: 08/30/2022] [Indexed: 10/14/2022]
|
17
|
Xu J, Cui J, Sun H, Wu Y, Xue C, Xie A, Li C. Facile preparation of hydrophilic PVDF membrane via tea polyphenols modification for efficient oil-water emulsion separation. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.130639] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
18
|
Liang L, Tan W, Dong Y, Gu F, Meng X. Modified cotton fabric based on thiolene click reaction and its oil/water separation application. ENVIRONMENTAL TECHNOLOGY 2022; 43:4137-4146. [PMID: 34161192 DOI: 10.1080/09593330.2021.1944324] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/26/2020] [Accepted: 06/04/2021] [Indexed: 06/13/2023]
Abstract
A cotton fabric with special wettability was prepared in two simple steps. The surface of the fabric was grafted with silicon-oxygen group using 3-(methacryloyloxy) propyl trimethoxysilane (MSPMA) as the reagent, and then (3-mercaptopropyl)triethoxysilane (MPTES) was used to react with the grafted fabric under ultraviolet light according to the principle of thiolene reaction. Meanwhile, the modified cotton fabrics with various pore sizes were obtained via modifying the cotton fabric with different pore size under the same experimental conditions. The as-prepared fabric had a better hydrophobic and lipophilic effect, whose water contact angle could be up to 146.7° and the separation efficiency for different kinds of oil/water mixtures was better than 94%. In addition, the pore sizes of cotton fabrics had a great effect on the rate of oil/water separation, which increased with the increase of the pore size.
Collapse
Affiliation(s)
- Liping Liang
- College of Life Science, College of Textile and Garment, Shaoxing University, Shaoxing, People's Republic of China
| | - Weishou Tan
- College of Life Science, College of Textile and Garment, Shaoxing University, Shaoxing, People's Republic of China
| | - Yanyan Dong
- College of Life Science, College of Textile and Garment, Shaoxing University, Shaoxing, People's Republic of China
| | - Feng Gu
- College of Life Science, College of Textile and Garment, Shaoxing University, Shaoxing, People's Republic of China
| | - Xu Meng
- College of Life Science, College of Textile and Garment, Shaoxing University, Shaoxing, People's Republic of China
- Key Laboratory of Clean Dyeing and Finishing Technology of Zhejiang Province, Shaoxing University, Shaoxing, People's Republic of China
- Zhejiang Sub-center of National Carbon Fiber Engineering Technology Research Center, Shaoxing, People's Republic of China
| |
Collapse
|
19
|
Chen Z, Zhan B, Li S, Wei D, Zhou W, Liu Y. Facile fabrication of corn stover-based aerogel for oil/water separation. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.121642] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/17/2022]
|
20
|
Fan Q, Lu T, Deng Y, Zhang Y, Ma W, Xiong R, Huang C. Bio-based materials with special wettability for oil-water separation. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.121445] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
|
21
|
Xu Z, Pan N, Xue Y, Jiang T, Wang Y. Long-lasting renewable antibacterial graphene/N-halamine-coated cotton fabrics benefitting from enhanced UV stability and quantitative tracking of bactericidal factors. Int J Biol Macromol 2022; 222:1192-1200. [DOI: 10.1016/j.ijbiomac.2022.09.254] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/30/2022] [Revised: 09/18/2022] [Accepted: 09/27/2022] [Indexed: 11/05/2022]
|
22
|
Chen J, Gao Q, Zhou G, Xu X. Interactions between the protein-epigallocatechin gallate complex and nanocrystalline cellulose: A systematic study. Food Chem 2022; 387:132791. [DOI: 10.1016/j.foodchem.2022.132791] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/22/2021] [Revised: 03/22/2022] [Accepted: 03/22/2022] [Indexed: 12/13/2022]
|
23
|
Fan B, Qi B, Wang P, Liu Y, Yu Y, Wang Q, Ren X. Mechanically Tough and Regenerable Antibacterial Nanofibrillated Cellulose-Based Aerogels for Oil/Water Separation. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:10716-10727. [PMID: 35980368 DOI: 10.1021/acs.langmuir.2c01785] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Nanofibrillated cellulose (NFC)-based aerogels have been widely used for various applications. However, the disadvantages of poor structural stability, low mechanical toughness, and easy contamination by bacteria hinder their large-scale application. In this work, 3-(3'-acrylicacidpropylester)-5,5-dimethyl hydantoin (APDMH) was grafted on oxidized NFC (ONC) to prepare antibacterial poly(APDMH)-g-ONC (PAC). PAC and poly(ethyleneimine) (PEI) were chemically cross-linked using 3-glycidoxypropyltrimethox (GPTMS), aiming at constructing a PAC-g-PEI aerogel with multiple network structures. The mechanical behaviors of composite aerogel and oil/water separation performances under different conditions were investigated. PAC-g-PEI aerogel exhibits outstanding fatigue resistance (>50 cycles of compression) and superior elasticity (96.76% height recovery after five compression-release cycles at 50% strain). The obtained superhydrophilic and underwater-oleophobic properties endow the aerogel with excellent oil/water separation performances, achieving a satisfactory separation efficiency of over 99% and flux of over 9500 L·m-2·h-1. Furthermore, the chlorinated aerogel of PAC-g-PEI-Cl shows highly efficient and rechargeable antibacterial properties, can inactivate 6.72-log Escherichia coli and 6.60-log Staphylococcus aureus within 10 min, and can still kill all inoculated bacteria after 50 cycles. In addition, PAC-g-PEI-Cl aerogel can inhibit biofilm formation, making it a promising candidate for highly efficient oil/water separation applications in diverse harsh conditions.
Collapse
Affiliation(s)
- Bingjie Fan
- Key Laboratory of Science and Technology of Eco-Textile, Ministry of Education, Jiangnan University, Wuxi 214122, People's Republic of China
| | - Bing Qi
- Key Laboratory of Science and Technology of Eco-Textile, Ministry of Education, Jiangnan University, Wuxi 214122, People's Republic of China
| | - Ping Wang
- Key Laboratory of Science and Technology of Eco-Textile, Ministry of Education, Jiangnan University, Wuxi 214122, People's Republic of China
| | - Ying Liu
- Key Laboratory of Science and Technology of Eco-Textile, Ministry of Education, Jiangnan University, Wuxi 214122, People's Republic of China
| | - Yuanyuan Yu
- Key Laboratory of Science and Technology of Eco-Textile, Ministry of Education, Jiangnan University, Wuxi 214122, People's Republic of China
| | - Qiang Wang
- Key Laboratory of Science and Technology of Eco-Textile, Ministry of Education, Jiangnan University, Wuxi 214122, People's Republic of China
| | - Xuehong Ren
- Key Laboratory of Science and Technology of Eco-Textile, Ministry of Education, Jiangnan University, Wuxi 214122, People's Republic of China
| |
Collapse
|
24
|
Natural phenolics and flavonoids modified the hierarchical cellular cellulose sponges for efficient water disinfection. Carbohydr Polym 2022; 296:119962. [DOI: 10.1016/j.carbpol.2022.119962] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/02/2022] [Revised: 08/02/2022] [Accepted: 08/03/2022] [Indexed: 11/02/2022]
|
25
|
Duman O, Diker CÖ, Uğurlu H, Tunç S. Highly hydrophobic and superoleophilic agar/PVA aerogels for selective removal of oily substances from water. Carbohydr Polym 2022; 286:119275. [DOI: 10.1016/j.carbpol.2022.119275] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/06/2021] [Revised: 02/04/2022] [Accepted: 02/18/2022] [Indexed: 01/09/2023]
|
26
|
Wang Y, Yu X, Fan W, Liu R, Liu Y. Alginate-oil gelator composite foam for effective oil spill treatment. Carbohydr Polym 2022; 294:119755. [DOI: 10.1016/j.carbpol.2022.119755] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/01/2022] [Revised: 06/15/2022] [Accepted: 06/15/2022] [Indexed: 11/02/2022]
|
27
|
A review on super-wettable porous membranes and materials based on bio-polymeric chitosan for oil-water separation. Adv Colloid Interface Sci 2022; 303:102635. [PMID: 35325601 DOI: 10.1016/j.cis.2022.102635] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/28/2021] [Revised: 02/27/2022] [Accepted: 03/01/2022] [Indexed: 12/21/2022]
Abstract
Appropriate surface wettability of membranes and materials are of an extreme importance for targeting separation of mixtures/emulsions such as oil from water or conversely water from oil. The development of super-wettable membranes and materials surfaces have shown remarkable potential for recovering water from oil-water emulsion while offering maximum resistance to fouling. The availability of clean and potable water has been regarded as an important global challenge for coming human generations. Oil and gas industry is continuously producing immense quantities of waste stream regarded as produced water which contains oil dispersed in water along with other several components. Treating such immense quantities of oily wastewater is of utmost need for recovering precious water for possible reuse or safe disposal. Various technologies have been developed for targeting the separation of oil-water emulsions or mixtures to harness useful potable water and oil as products. Membrane-based separations or use of porous materials such as mesh have been explored in literature for separation of oil-water mixtures/emulsions. Given the unique features of special hydrophilicity, ease of tunability, control of molecular weight, abundant availability, and potential for commercial scale up, chitosan has been extensively used for modifying membranes/meshes or preparing composites with other materials for oil-water separations. This review has described in detail the synthesis, methods of modification and application of chitosan-based super-wettable membranes/meshes and porous materials for oil-water separation. The special wettability features including super-hydrophobicity/superoleophilicity, super-oleophobicity/super-hydrophilicity and super-hydrophilicity/underwater super-oleophobicity of various chitosan-based membranes and materials have been discussed in detail in the review. The strategies for enhancing or developing special wettability for target specific applications have also been discussed. Finally, the challenges, their respective importance have been identified along with a discussion on possible solutions to these challenges.
Collapse
|
28
|
Li M, Wang X, Gong G, Tang Y, Zhang Y, Guo J, Liao X, Shi B. Natural polyphenol-based nanoengineering of collagen-constructed hemoperfusion adsorbent for the excretion of heavy metals. JOURNAL OF HAZARDOUS MATERIALS 2022; 428:128145. [PMID: 35007965 DOI: 10.1016/j.jhazmat.2021.128145] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/13/2021] [Revised: 12/10/2021] [Accepted: 12/21/2021] [Indexed: 06/14/2023]
Abstract
Designing a hemoperfusion adsorbent for the excretion therapy of toxic heavy metals still remains a great challenge due to the biosafety risks of non-biological materials and the desired highly efficient removal capacity. Herein, inspired from the homeostasis mechanism of plants, natural polyphenols are integrated with collagen matrix to construct a polyphenol-functionalized collagen-based artificial liver (PAL) for heavy metals excretion and free radicals scavenging therapy. PAL presents high adsorption capacities for Cu2+, Pb2+, and UO22+ ions, up to 76.98 μmol g-1, 106.70 μmol g-1, and 252.48 μmol g-1, respectively. Remarkably, PAL possesses a high binding affinity for UO22+, Pb2+, and Cu2+ ions even in the complex serum environment with the presence of biologically-relevant ions (e.g., Mg2+, Ca2+ ions). Low hemolysis ratio (1.77%), high cell viability (> 85%), high plasma recalcification time (17.4 min), and low protein adsorption (1.02 μmol g-1) indicate outstanding biocompatibility of this material. This natural polyphenol/collagen-based fully bio-derived hemoperfusion adsorbent provides a novel and potentially applicable strategy for constructing a hemoperfusion adsorbent for heavy metal ions excretion therapy with efficiency and biosafety.
Collapse
Affiliation(s)
- Meifeng Li
- Department of Biomass Chemistry and Engineering, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China
| | - Xiaoling Wang
- Department of Biomass Chemistry and Engineering, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China; BMI Center for Biomass Materials and Nanointerfaces, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China
| | - Guidong Gong
- Department of Biomass Chemistry and Engineering, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China; BMI Center for Biomass Materials and Nanointerfaces, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China
| | - Yi Tang
- Department of Biomass Chemistry and Engineering, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China
| | - Yaoyao Zhang
- Key Laboratory of Birth Defects and Related of Women and Children of Ministry of Education, The Reproductive Medical Center, Department of Obstetrics and Gynecology, West China Second University Hospital, Sichuan University, Chengdu 610041, China
| | - Junling Guo
- Department of Biomass Chemistry and Engineering, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China; BMI Center for Biomass Materials and Nanointerfaces, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China; State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan 610065, China; National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu, Sichuan 610065, China.
| | - Xuepin Liao
- Department of Biomass Chemistry and Engineering, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China; BMI Center for Biomass Materials and Nanointerfaces, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China; National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu, Sichuan 610065, China.
| | - Bi Shi
- Department of Biomass Chemistry and Engineering, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China; BMI Center for Biomass Materials and Nanointerfaces, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China; State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan 610065, China; National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu, Sichuan 610065, China
| |
Collapse
|
29
|
Chen J, Huang W, Chen Y, Zhou Z, Liu H, Zhang W, Huang J. Facile Preparation of Chitosan-Based Composite Film with Good Mechanical Strength and Flame Retardancy. Polymers (Basel) 2022; 14:polym14071337. [PMID: 35406210 PMCID: PMC9002840 DOI: 10.3390/polym14071337] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2022] [Revised: 03/18/2022] [Accepted: 03/22/2022] [Indexed: 12/05/2022] Open
Abstract
To improve on the poor strength and flame retardancy of a chitosan (CS)-based functional film, cellulose nanofiber (CNF) was taken as the reinforced material and both ammonium polyphosphate (APP) and branched polyethyleneimine (BPEI) as the flame-retardant additives in the CS matrix to prepare the CS/CNF/APP/BPEI composite film by simple drying. The resulting composite film showed good mechanical strength, with a tensile strength reaching 71.84 Mpa due to the high flexibility of CNF and the combination of CS, CNF and BPEI through strong hydrogen bonding interactions. The flame retardant-performance of the composite film greatly enhanced the limit oxygen index (LOI), up to 32.7% from 27.6% for the pure film, and the PHRR intensity decreased to 28.87 W/g from 39.38% in the micro-scale combustion calorimetry (MCC) test due to the ability of BPEI to stimulate the decomposition of APP, releasing non-flammable gases such as CO2, N2, NH3, etc., and forming a protective phosphating layer to block the entry of O2. Based on the good flame retardancy, mechanical strength and transparency, the CS/CNF/APP/BPEI composite film has a great potential for future applications.
Collapse
Affiliation(s)
- Jirui Chen
- College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou 311300, China; (J.C.); (W.H.); (Y.C.); (Z.Z.); (H.L.)
- China Bamboo Charcoal Museum, Lishui 323300, China
| | - Wentao Huang
- College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou 311300, China; (J.C.); (W.H.); (Y.C.); (Z.Z.); (H.L.)
| | - Yifan Chen
- College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou 311300, China; (J.C.); (W.H.); (Y.C.); (Z.Z.); (H.L.)
| | - Zenan Zhou
- College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou 311300, China; (J.C.); (W.H.); (Y.C.); (Z.Z.); (H.L.)
| | - Huan Liu
- College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou 311300, China; (J.C.); (W.H.); (Y.C.); (Z.Z.); (H.L.)
| | - Wenbiao Zhang
- College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou 311300, China; (J.C.); (W.H.); (Y.C.); (Z.Z.); (H.L.)
- Correspondence: (W.Z.); (J.H.)
| | - Jingda Huang
- College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou 311300, China; (J.C.); (W.H.); (Y.C.); (Z.Z.); (H.L.)
- Correspondence: (W.Z.); (J.H.)
| |
Collapse
|
30
|
Iskandar MA, Yahya EB, Abdul Khalil HPS, Rahman AA, Ismail MA. Recent Progress in Modification Strategies of Nanocellulose-Based Aerogels for Oil Absorption Application. Polymers (Basel) 2022; 14:polym14050849. [PMID: 35267674 PMCID: PMC8912783 DOI: 10.3390/polym14050849] [Citation(s) in RCA: 15] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/24/2022] [Revised: 02/13/2022] [Accepted: 02/16/2022] [Indexed: 02/06/2023] Open
Abstract
Oil spills and oily wastewater have become a major environmental problem in recent years, directly impacting the environment and biodiversity. Several techniques have been developed to solve this problem, including biological degradation, chemicals, controlled burning, physical absorption and membrane separation. Recently, biopolymeric aerogels have been proposed as a green solution for this problem, and they possess superior selective oil absorption capacity compared with other approaches. Several modification strategies have been applied to nanocellulose-based aerogel to enhance its poor hydrophobicity, increase its oil absorption capacity, improve its selectivity of oils and make it a compressible and elastic magnetically responsive aerogel, which will ease its recovery after use. This review presents an introduction to nanocellulose-based aerogel and its fabrication approaches. Different applications of nanocellulose aerogel in environmental, medical and industrial fields are presented. Different strategies for the modification of nanocellulose-based aerogel are critically discussed in this review, presenting the most recent works in terms of enhancing the aerogel performance in oil absorption in addition to the potential of these materials in near future.
Collapse
Affiliation(s)
- M. A. Iskandar
- School of Physics, Universiti Sains Malaysia, Penang 11800, Malaysia; (M.A.I.); (A.A.R.)
| | - Esam Bashir Yahya
- School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia;
| | - H. P. S. Abdul Khalil
- School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia;
- Correspondence:
| | - A. A. Rahman
- School of Physics, Universiti Sains Malaysia, Penang 11800, Malaysia; (M.A.I.); (A.A.R.)
| | - M. A. Ismail
- Teraju Saga Sdn. Bhd. MP813, Jalan Melaka Perdana 2, Taman Melaka Perdana, Alor Gajah, Melaka 78000, Malaysia;
| |
Collapse
|
31
|
Cui Y, Kang W, Hu J. Construction of a carbon nanosphere aerogel with magnetic response for efficient oil/water separation. NEW J CHEM 2022. [DOI: 10.1039/d2nj04450a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
A magnetic carbon nanosphere aerogel with high adsorption capacity was synthesized, which could realize positioning adsorption and rapid recovery.
Collapse
Affiliation(s)
- Yan Cui
- College of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China
| | - Weiwei Kang
- Academy of Medical Sciences, Shanxi Medical University, Taiyuan 030024, China
| | - Jifan Hu
- College of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China
| |
Collapse
|
32
|
Ding F, Zhang S, Ren X, Huang TS. Development of PET Fabrics Containing N-halamine Compounds with Durable Antibacterial Property. FIBERS AND POLYMERS 2022. [PMCID: PMC8352750 DOI: 10.1007/s12221-021-0448-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/13/2023]
Abstract
Antibacterial textile materials are widely used in daily life, but most are disposable products with poor antibacterial durability. N-halamine can rapidly inactivate microorganisms, has good stability, and shows great potential applications in antibacterial fabrics. In this study, an N-halamine monomer precursor was synthesized and treated onto PET fabrics. The treated PET fabrics were rendered antibacterial functionality after chlorination, and exhibited good antibacterial properties with inactivation rate of 100.0 % for both E. coli O157:H7 and S. aureus. After 50 wash cycles, the chlorinated treated PET fabrics could maintain 80.0 % antibacterial efficacy, demonstrating durable antibacterial properties. Storage stability and UV irradiation tests showed that the treated PET fabrics had remarkable regenerable properties. The reduction of the breaking strength was within 12 % after treatment, which is in a satisfying range in antimicrobial finishing.
Collapse
Affiliation(s)
- Fang Ding
- Key Laboratory of Eco-textiles of Ministry of Education, College of Textile Science and Engineering, Jiangnan University, Wuxi, Jiangsu, 214122 China
| | - Shumin Zhang
- Key Laboratory of Eco-textiles of Ministry of Education, College of Textile Science and Engineering, Jiangnan University, Wuxi, Jiangsu, 214122 China
| | - Xuehong Ren
- Key Laboratory of Eco-textiles of Ministry of Education, College of Textile Science and Engineering, Jiangnan University, Wuxi, Jiangsu, 214122 China
| | - Tung-Shi Huang
- Department of Poultry Science, Auburn University, Auburn, Alabama, 36849 USA
| |
Collapse
|
33
|
Biomass-based superhydrophobic coating with tunable colors and excellent robustness. Carbohydr Polym 2021; 270:118401. [PMID: 34364634 DOI: 10.1016/j.carbpol.2021.118401] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2021] [Revised: 06/30/2021] [Accepted: 06/30/2021] [Indexed: 12/21/2022]
Abstract
Multicolored superhydrophobic coating with high durability has been receiving tremendous attention in decorative applications. Herein, a facile method to fabricate multicolored superhydrophobic coating with excellent robustness has been developed by using cellulose and chitosan. The multicolored coatings can be obtained through single dyeing or mixed dyeing based on three primary dyes. The coating can be applied on hard substrates (e.g. glass, aluminum sheet) and soft substrates (e.g. cotton fabric) by diverse methods including spraying, dip-coating and painting. The colorful coating firmly adheres to the substrates due to the multiple interactions (siloxane covalent bonds and hydrogen bonds). The colorful coating exhibits water-repellant behaviors and can withstand sandpaper abrasion, tape-peeling cycles, water impact, salt spray test and UV environments. Furthermore, the multicolored coating can be used as a new type of pigment for painting on different substrates and is expected to have a huge potential application in technological design or decoration.
Collapse
|
34
|
Cellulose-based special wetting materials for oil/water separation: A review. Int J Biol Macromol 2021; 185:890-906. [PMID: 34214576 DOI: 10.1016/j.ijbiomac.2021.06.167] [Citation(s) in RCA: 24] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/24/2021] [Revised: 06/19/2021] [Accepted: 06/25/2021] [Indexed: 02/06/2023]
Abstract
Oil spill accidents and oily wastewater discharged by petrochemical industries have severely wasted water resources and damaged the environment. The use of special wetting materials to separate oil and water is efficient and environment-friendly. Cellulose is the most abundant renewable resource and has natural advantages in removing pollutants from oily wastewater. The application and modification of cellulose as special wetting materials have attracted considerable research attention. Therefore, we summarized cellulose-based superlipophilic/superhydrophobic and superhydrophilic/superoleophobic materials exhibiting special wetting properties for oil/water separation. The treatment mechanism, preparation technology, treatment effect, and representative projects of oil-bearing wastewater are discussed. Moreover, cellulose-based intelligent-responsive materials for application to oil/water separation and the removal of other pollutants from oily wastewater have also been summarized. The prospects and potential challenges of all the materials have been highlighted.
Collapse
|
35
|
Muhammad A, Lee D, Shin Y, Park J. Recent Progress in Polysaccharide Aerogels: Their Synthesis, Application, and Future Outlook. Polymers (Basel) 2021; 13:1347. [PMID: 33924110 PMCID: PMC8074296 DOI: 10.3390/polym13081347] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/07/2021] [Revised: 04/13/2021] [Accepted: 04/13/2021] [Indexed: 01/07/2023] Open
Abstract
Porous polysaccharides have recently attracted attention due to their porosity, abundance, and excellent properties such as sustainability and biocompatibility, thereby resulting in their numerous applications. Recent years have seen a rise in the number of studies on the utilization of polysaccharides such as cellulose, chitosan, chitin, and starch as aerogels due to their unique performance for the fabrication of porous structures. The present review explores recent progress in porous polysaccharides, particularly cellulose and chitosan, including their synthesis, application, and future outlook. Since the synthetic process is an important aspect of aerogel formation, particularly during the drying step, the process is reviewed in some detail, and a comparison is drawn between the supercritical CO2 and freeze drying processes in order to understand the aerogel formation of porous polysaccharides. Finally, the current applications of polysaccharide aerogels in drug delivery, wastewater, wound dressing, and air filtration are explored, and the limitations and outlook of the porous aerogels are discussed with respect to their future commercialization.
Collapse
Affiliation(s)
| | | | | | - Juhyun Park
- Department of Intelligent Energy and Industry, School of Chemical Engineering and Materials Science, Chung-Ang University, Seoul 06974, Korea; (A.M.); (D.L.); (Y.S.)
| |
Collapse
|
36
|
Abstract
Nanocellulose (NC) is a biomaterial with growing interest in the field of nanocomposites and sustainable materials. NC has various applications including biodegradable materials, reinforcing agents, packaging films, transpiring membranes and medical devices. Among the many applications, the use of NC functionalized with organic and inorganic groups has found wide use as a catalyst in chemical transformations. The goal of this review is to collect the current knowledge on its catalytic applications for chemical groups conversion. We have chosen to organize the manuscript according to subdivision of NC into Bacterial Nanocellulose (BNC), Cellulose Nanocrystals (CNCs), and Cellulose Nanofibers (CNFs) and their role as inorganic- and organic-functionalized NC-catalysts in organic synthesis. However, in consideration of the fact that the literature on this field is very extensive, we have decided to focus our attention on the scientific productions of the last five years.
Collapse
|
37
|
Micro and nanocrystalline cellulose derivatives of lignocellulosic biomass: A review on synthesis, applications and advancements. Carbohydr Polym 2020; 250:116937. [DOI: 10.1016/j.carbpol.2020.116937] [Citation(s) in RCA: 58] [Impact Index Per Article: 14.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/29/2020] [Revised: 08/10/2020] [Accepted: 08/10/2020] [Indexed: 12/16/2022]
|
38
|
Liu Q, Yu H, Zeng F, Li X, Sun J, Li C, Lin H, Su Z. HKUST-1 modified ultrastability cellulose/chitosan composite aerogel for highly efficient removal of methylene blue. Carbohydr Polym 2020; 255:117402. [PMID: 33436228 DOI: 10.1016/j.carbpol.2020.117402] [Citation(s) in RCA: 46] [Impact Index Per Article: 11.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/06/2020] [Revised: 11/10/2020] [Accepted: 11/10/2020] [Indexed: 12/16/2022]
Abstract
A novel composite HKUST-1/cellulose/chitosan aerogel (HKUST-1/CCSA) as an efficient adsorbent with hierarchical pores was prepared through a facile in situ growth way combining covalent cross-linking, vacuum freeze-drying, and solvothermal methods. By incorporating with cellulose (CE), covalently cross-linked cellulose (CE)/chitosan (CS) composite aerogel exhibits good stability, maintaining fine morphology and structures in acidic solutions under solvothermal conditions. Meantime, a high content of CS is beneficial to enhancing the growth of HKUST-1. Finally, the mass loading ratio of HKUST-1 is as high as 42.54 % in HKUST-1/CCSA. The BET specific surface area of HKUST-1/CCSA reaches 457.75 m2 g-1, which is much larger than that of CCSA (9.74 m2 g-1). HKUST-1/CCSA was applied to remove methylene blue with high adsorption capacity (526.3 mg g-1) and good recycling capability. This strategy can provide an effective and facile pathway to prepare ultra-stable polysaccharide-based composite aerogel with high specific surface area and hierarchical pores, branching out more applications in pollutant treatment fields.
Collapse
Affiliation(s)
- Qun Liu
- School of Materials Science and Engineering, Changchun University of Science and Technology, Changchun, 130022, China; Department of Light Chemical Engineering, Jilin Institute of Chemical Technology, Jilin, 132022, China
| | - Haihuan Yu
- School of Materials Science and Engineering, Changchun University of Science and Technology, Changchun, 130022, China
| | - Fanming Zeng
- School of Materials Science and Engineering, Changchun University of Science and Technology, Changchun, 130022, China; Jilin Provincial Science and Technology Innovation Center of Optical Materials and Chemistry, Changchun, 130022, China.
| | - Xiao Li
- Jilin Provincial Science and Technology Innovation Center of Optical Materials and Chemistry, Changchun, 130022, China.
| | - Jing Sun
- Jilin Provincial Science and Technology Innovation Center of Optical Materials and Chemistry, Changchun, 130022, China
| | - Chun Li
- School of Materials Science and Engineering, Changchun University of Science and Technology, Changchun, 130022, China
| | - Hai Lin
- School of Materials Science and Engineering, Changchun University of Science and Technology, Changchun, 130022, China
| | - Zhongmin Su
- School of Materials Science and Engineering, Changchun University of Science and Technology, Changchun, 130022, China; Jilin Provincial Science and Technology Innovation Center of Optical Materials and Chemistry, Changchun, 130022, China.
| |
Collapse
|