Preparation and characterization of curdlan/polyvinyl alcohol/ thyme essential oil blending film and its application to chilled meat preservation

The physicochemical properties of Cassava Starch/Carboxymethyl cellulose sodium edible film incorporated of Bacillus and its application in salmon fillet packaging

Edible film is now a trend in the food packaging industry. In this study, edible films were prepared by adding two Bacillus spp. (Bacillus amyloliquefaciens Y11 and Bacillus velezensis Y12) to a cassava starch and carboxymethyl cellulose sodium matrix. The structural, physicochemical, and biological characteristics of the film were analyzed, and its application in salmon preservation was explored. The film had a dense structure and no pores, indicating that its polymeric components were compatible with each other. The addition of Bacillus spp. increased the antioxidant activity of the film and its ability to eliminate hydroxyl radicals (84.57% and 91.86%, respectively). The film also showed good antibacterial activity against several pathogens and underwent complete degradation in natural soil within 12 days. The film significantly reduced the total coliform count of salmon and extended its shelf life by 3 days, demonstrating its value as a food-packaging material.

A double-sided coating paper antibacterial indicator card based on polyvinyl alcohol/sodium carboxymethyl cellulose-anthocyanins and chitosan-halloysite nanotubes loaded essential oil to monitor fish freshness

This study developed a multifunctional paper-based freshness antibacterial indicator card by dual-sided coating on conventional filter paper. The indicator coating was composed of anthocyanins from purple cabbage, and polyvinyl alcohol and sodium carboxymethyl cellulose as substrates while the antibacterial coating contained halloysite nanotubes for loaded thyme essential oil and chitosan. FT-IR, XRD, and SEM analyses revealed that the components were well-mixed, and the paper was tightly bound to the coatings through hydrogen bonds. Additionally, the coating effectively filled the porous fiber gaps in the paper, significantly enhancing the mechanical properties of the paper. The tensile strength of the coated paper was enhanced from 14.28 MPa to a range of 42.25-47.71 MPa, and the bending resistance was increased from 0.35 N·mm to a range of 1.72-1.99 N·mm compared to the uncoated paper. The addition of anthocyanins provided excellent sensitivity to pH and ammonia for the indicator card. Furthermore, the coating including halloysite nanotubes for loaded thyme essential oil exhibited antimicrobial resistance against Escherichia coli and Staphylococcus aureus. When used on fresh carp, the antibacterial indicator card not only indicated the freshness of the carp but also extended the best before date of the fish meat by 1-2 days. The indicator exhibited the most pronounced color transformation and optimal freshness indication performance when the mass fraction of anthocyanins was 2 %.

Preserving plum perfection: Buckwheat starch edible coating with xanthan gum and lemongrass essential oil

The research focused on the fabrication of composite coatings using buckwheat starch (BS) and xanthan gum (XG) with incorporation of lemongrass (Cymbopogon citratus) essential oil (LEO) with varying concentration (0.75 %, 1.0 % and 1.25 % (w/v). BS was extracted from buckwheat groats (Fagopyrum esculentum) and its physico-chemical characteristics were determined. BS showed spherical and polygonal morphology and its XRD pattern was similar to starch extracted from other cereal sources. The amount of reducing sugar, starch and amylose content in extracted BS were 0.99 ± 0.33 %, 86.32 ± 0.22 % and 21.02 ± 1.89 % respectively, which indicates that BS is a suitable base material for the formation of edible coatings. XG was mixed with BS in different ratios (1:1, 2:1, 3:1 and 4:1) to optimize the best ratio of combination for composite coatings. The coating with a ratio of 2:1 was very smooth and was chosen for incorporation of LEO and the coatings physical, functional, mechanical, thermal and micro-structural characteristics were examined. The coating S5 with 1.25 % (w/v) concentration of LEO showed the best results with least moisture content (MC), minimum water vapor permeability (WVP) and maximum contact angle value. Moreover, the S5 formulation had the highest antioxidant (73.3 %) ability and maximum antimicrobial efficiency with inhibition zones of 22.09 ± 0.06 mm and 28.65 ± 0.14 mm against S. aureus and E. coli respectively. The coatings were then coated on plum fruit, and various parameters like weight loss, pH, shrinkage and TSS were calculated every 4th day during the 20 days of refrigeration period. The coated plums' ripening pace was delayed by the S5 formulation which improved moisture retention, maintained the plums' TSS value and overall pH. Therefore, composite coatings made up of BS, XG and 1.25 % (w/v) can be used as a cost-effective bio-active coating material for plum preservation under refrigeration conditions.

Chitosan-based packaging films with antibacterial-sterilization integrated continuous activity for extending the shelf life of perishable foods

The current food packaging films can be preservative but lack the function of combining antibacterial and sterilization which lead to films can not maximize prolong shelf life of perishable foods. This study provided a new strategy to realize prolonging shelf life of perishable foods by integrating antibacterial and sterilization which focused on applying photodynamic inactivation to films with continuous activity, where curcumin (CUR) and sodium copper chlorophyll (SCC) were loaded into chitosan (CS) films. Compared to pure CS films, the barrier capacity (oxygen permeability and water vapor permeability) and mechanical properties of composite films were improved by introducing CUR and SCC. In addition, the composite film can effectively against food-borne pathogenic bacteria and significantly prolong the shelf life of cherries and pork. The provided strategy has potential application prospects in food preservation packaging.

Structural and Physiochemical Properties of Polyvinyl Alcohol-Succinoglycan Biodegradable Films

Polyvinyl alcohol (PVA)-bacterial succinoglycan (SG) biodegradable films were developed through a solvent-casting method. Effects of the PVA/SG ratio on the thickness, transmittance, water holding capacity, and structural and mechanical properties were investigated by various analytical methods. All the prepared films were transparent and uniform, and XRD and FTIR analyses confirmed that PVA was successfully incorporated into SG. The films also showed excellent UV-blocking ability: up to close to 80% with increasing SG concentration. The formation of effective intermolecular interactions between these polymers was evidenced by their high tensile strength and moisture transport capacity. By measuring the biodegradation rate, it was confirmed that films with high SG content showed the fastest biodegradation rate over 5 days. These results confirm that PVA/SG films are eco-friendly, with both excellent biodegradability and effective UV-blocking ability, suggesting the possibility of industrial applications as a packaging material in various fields in the future.

High performance polyvinyl alcohol/lignin fibers with excellent mechanical and water resistance properties

To address the shortcoming of Polyvinyl alcohol (PVA) fibers for food or medical packaging materials including low mechanical strength and poor water resistance, lignin (LN) was used as raw material, acetone/H2O as solvent to self-assemble into lignin nanoparticles (LNP) by adverse solvent precipitation approach, and then PVA/LNP composite fibers with different LNP contents were fabricated successfully by wet and dry spinning. Herein, vast hydrophilic hydroxyl groups in PVA decreased owing to the hydrogen bond between LN and PVA, Especially, with only 0.5 wt% loading of LNP into the PVA/LNP fibers, the diameter was 94.4 dtex, tensile strength was 10.1 cN/dtex (1279.8 MPa), initial modulus was 94.7 cN/dtex (12.0 GPa), the crystallinity was 56.7 %, the orientation was 97.1 %, and water contact angle was 103.1°. Compared with pure PVA fibers, the tensile strength of PVA/LNP-0.5 fibers was increased by 44.2 % and the contact angle was increased 37°. This work provides novel insights into obtaining lignin-reinforced PVA composite fibers with strong mechanical properties and excellent water resistance properties, indicating the potential of the PVA/LNP fibers for food or medical packaging application.

Edible chitosan-based Pickering emulsion coatings: Preparation, characteristics, and application in strawberry preservation

The long-term application of plant essential oils in food preservation coatings is limited by their poor water solubility and high volatility, despite their recognized synergistic antimicrobial effects in postharvest fruit preservation. To overcome these limitations, a Pickering emulsion loaded with thyme essential oil (TEO) was developed by utilizing hydrogen bonding and electrostatic interactions to induce cross-linking of chitosan particles. This novel emulsion was subsequently applied in the postharvest storage of strawberries. The shear-thinning behavior (flow index <1) and elastic gel-like characteristics of the emulsion made it highly suitable for spray application. Regarding TEO release, the headspace concentration of TEO increased from 0.21 g/L for pure TEO to 1.86 g/L after two instances of gas release due to the stabilizing effect of the chitosan particles at the oil-water interface. Notably, no phase separation was observed during the 10-day storage of the emulsion. Consequently, the emulsion was successfully employed for the postharvest storage of strawberries, effectively preventing undesirable phenomena such as weight loss, a decrease in firmness, an increase in pH, and microbial growth. In conclusion, the developed Pickering emulsion coating exhibits significant potential for fruit preservation applications, particularly for extending the shelf life of strawberries.

Enhancing the lipid stability of foods of animal origin using edible packaging systems

Foods of animal origin are prone to oxidation due to their high lipid content and fatty acid profile. Edible packaging systems have evolved as a new way of preserving animal-derived foods and have been reported to retard lipid oxidation using antioxidant molecules from side-streams, waste, and agricultural by-products. Studies have evaluated previously undocumented film materials and novel bioactive molecules as additives for edible packaging for animal-derived foods. However, none of the studies is specifically focused on evaluating the packaging systems available for enhancing lipid stability. This paper thoroughly examines and discusses the application of edible packaging containing novel antioxidant molecules for controlling the lipid oxidation of animal-derived foods. The paper analyses and interprets the main findings of the recently published research papers. The materials and active principles used for enhancing lipid stability have been summarised and the underlying mechanisms discussed in detail. Studies should aim at using cheaper and readily available natural ingredients in future for the production of affordable packaging systems.

Physicochemical properties and pork preservation effects of lotus seed drill core powder starch-based active packaging films

Lotus seed drill core powder starch (LCPS)-based active packaging films incorporated with cellulose nanocrystals (CNC) and grapefruit essential oil-corn nanostarch Pickering emulsion (ECPE) were characterized, and their pork preservation effects were investigated in this study. In contrast with corn, potato and rice starches, LCPS showed higher amylose content, elliptical and circular shape with more uniform size distribution. Furthermore, LCPS film exhibited lower light transmittance, stronger tensile strength, and smaller elongation at break compared to the other starch films. Then, the LCPS film containing 4 % CNC and 9 % ECPE was fabricated which had stronger mechanical properties, lower water vapor permeability and oxygen transmission rate, and denser network structure. FTIR and XRD analyses also confirmed that CNC and ECPE were successfully implanted into the LCPS matrix without damaging the crystalline structure of LCPS. Herein, the LCPS/CNC/ECPE film exerted potential antibacterial activity against Escherichia coli and Staphylococcus aureus. Besides, packaging with this composite film significantly preserved the pork during cold storage via decreasing its juice loss rate, pH value, total number of colonies, total volatile base nitrogen and thiobarbituric acid reactive substance values. The present study will provide a theoretical basis for the application of LCPS as new biodegradable active films.

Preparation and properties of films loaded with cellulose nanocrystals stabilized Thymus vulgaris essential oil Pickering emulsion based on modified tapioca starch/polyvinyl alcohol

Pickering emulsions were prepared by stabilizing thymus vulgaris essential oil (TEVO) with cellulose nanocrystals (CNCs), which formed composite films by loading the emulsions into modified tapioca/polyvinyl alcohol (PVA)-based films. The results showed that the 1.0 % CNCs-15 % TEVO emulsion had optimal stability and smaller particle size. The emulsion increased the thickness of the composite film in the form of solid material additions (thickness, 0.062-0.099 mm), which opacity given the laminating film's superior UV-blocking ability compared to blank film. The emulsion plasticizing effect enhanced the film's elongation at break (EAB, 123-159 %). In addition, due to the hydrophobicity and influencing the diffusion path of water molecules in the emulsion, the denser microstructure composite film had a lower water vapor transmission coefficient (WVP, 6.22 × 10-11-5.35 × 10-11g∙cm/cm2∙s∙Pa) to impede moisture penetration. Meanwhile, the composite film can effectively maintain the color and inhibit the growth of microorganisms to extend the storage time of fish fillets.

A novel curdlan/methyl cellulose/walnut green husk polyphenol edible composite film for walnut packaging

In this study, polyphenols were extracted from walnut green husk, an agricultural waste, and were incorporated into curdlan (CD) and methyl cellulose (MC) to create a novel edible composite film. For structural character, the film matrix was tightly bound primarily by non-covalent bonds and the addition of walnut green husk polyphenols (WGHP) significantly reduced the surface roughness of the composite film. For mechanical properties, the addition of WGHP improve the flexibility of films, and it significantly improved the barrier ability of ultraviolet rays and water-vapor. Furthermore, the incorporation of WGHP to the CD-MC film resulted in enhanced antioxidant and antibacterial effects, which effectively retards lipid oxidation in fried walnuts. Consequently, the fabricated CD-MC-WGHP composite film bears immense potential for use in food preservation applications, particularly in extending the shelf life of fried walnuts.

Nanocomposites and their application in antimicrobial packaging

The advances in nanocomposites incorporating bioactive substances have the potential to transform the food packaging sector. Different nanofillers have been incorporated into polymeric matrixes to develop nanocomposite materials with improved mechanical, thermal, optical and barrier properties. Nanoclays, nanosilica, carbon nanotubes, nanocellulose, and chitosan/chitin nanoparticles have been successfully included into polymeric films, resulting in packaging materials with advanced characteristics. Nanostructured antimicrobial films have promising applications as active packaging in the food industry. Nanocomposite films containing antimicrobial substances such as essential oils, bacteriocins, antimicrobial enzymes, or metallic nanoparticles have been developed. These active nanocomposites are useful packaging materials to enhance food safety. Nanocomposites are promising materials for use in food packaging applications as practical and safe substitutes to the traditional packaging plastics.

Influence of cellulose viscosity on the physical, mechanical, and barrier properties of the chitosan-based films

This research paper presents a comprehensive investigation into developing biodegradable films for food packaging applications using chitosan (CN) in conjunction with three distinct types of cellulose (CE), each characterized by varying viscosities. The primary objective was to assess the influence of cellulose viscosity on the physical, mechanical, and barrier properties of the resulting films. The medium-viscosity cellulose imparted numerous advantageous qualities to the biodegradable films. These films exhibited optimal thickness (31 μm), ensuring versatility in food packaging while maintaining favorable mechanical properties, blending strength, and flexibility. Also, medium-viscosity cellulose significantly improved the films' barrier performance, particularly regarding oxygen permeability [1.80 × 10-6 (g.mm.m-2. s-1)]. Furthermore, the medium-viscosity cellulose contributed to superior moisture-related properties, including reduced water vapor permeability [14.80 × 10-9 (g.mm.m-2. s-1. Pa-1)], moisture content (13.22 %), and water solubility (22.87 %), while maintaining an appropriate degree of swelling (41.88 %). Moreover, the study employed advanced analytical techniques, including FTIR, XRD, and TGA, to provide critical insights into the films' chemical, structural, and thermal aspects. This research underscored the importance of the viscosity of film formulation materials as a crucial element in designing and efficiently producing films for food packaging.

Chitosan/konjac glucomannan bilayer films: Physical, structural, and thermal properties

To overcome the limitations of chitosan (CS) and konjac glucomannan (KGM), the bilayer films of CS and KGM were prepared by layer-by-layer (LBL) casting method, and the effects of different mass ratios (i.e., C5: K0, C4:K1, C3:K2, C1:K1, C2:K3, C1:K4, and C0:K5) on the microstructures and physicochemical properties of bilayer films were examined to evaluate their applicability in food packaging. The results revealed that the bilayer films had uniform microstructures. When compared with pure films, the bilayer films displayed lower swelling degrees and water vapor permeability. However, the tensile tests revealed a reduction in the mechanical properties of the bilayer films, which was nonetheless superior to that of the pure KGM film. In addition, the intermolecular interactions between the CS and KGM layers were observed through FTIR and XRD analyses. Finally, TGA and DSC analyses demonstrated a decrease in the thermal stability of the bilayer films. Our cumulative results verified that CS-KGM bilayer films may be a promising material for use in food packaging and further properties of the bilayer films can be supplemented in the future through layer-by-layer modification and the addition of active ingredients.

Characterizations of Water-Soluble Chitosan/Curdlan Edible Coatings and the Inhibitory Effect on Postharvest Pathogenic Fungi

This study focused on developing a composite coating comprising water-soluble chitosan (CTS) and curdlan (CUR). Cherry tomatoes served as the test material for assessing the preservative efficacy of these coatings. The incorporation of CUR markedly enhanced the coating's surface properties, refined its molecular structure, and improved its tensile strength and elongation at break. Additionally, the coating demonstrated enhanced permeability to water vapor, oxygen, and carbon dioxide and improved light transmission. The storage experiment, conducted at 25 ± 1 °C with a relative humidity of approximately 92% over 10 days, revealed that the CTS/CUR composite coating at a 1:1 ratio significantly outperformed the individual CTS or CUR coating and uncoated samples in maintaining the quality of postharvest cherry tomatoes. The 1:1 CTS/CUR composite coating demonstrated superior preservative effects. This study suggested that water-soluble chitosan/curdlan composite coatings have considerable potential for use in the preservation of postharvest fruits and vegetables.

Smart antibacterial nanocellulose packaging film based on pH-stimulate responsive microcapsules synthesized by Pickering emulsion template

Spoilage results in food waste and endangers consumer health, and the smart antibacterial packaging can effectively inhibit bacterial growth and reduce food spoilage. In this study, the smart antibacterial nanocellulose packaging films were developed by adding the pH-stimulated responsive microcapsules into cellulose nanofibril (CNF) film-forming. The microcapsules were synthesized by interfacial polymerization of Pickering emulsion. Carboxylated cellulose nanocrystals as solid particles stabilized the composited oil phase to prepare the oil-in-water Pickering emulsion. The emulsion with the particle concentration of 1.25 wt% and the oil phase mass fraction of 7.5 % processes excellent stability and uniform particle size, was chosen to synthesize microcapsules. The cinnamaldehyde in the film with the addition amount of microcapsules 0.6 g burst released in the first 1 h and then slowly, and the cumulative release at pH 2.0, 4.0, 5.5 and 7.2 was 28.43 μg/cm2, 18.84 μg/cm2, 16.52 μg/cm2 and 12.89 μg/cm2, respectively. The inhibitory rate of film against both E. coli and L. monocytogenes reached 99 % at pH 4.0. The shelf life of pork packed by the film prolonged to nearly 9 d at room temperature. The developed films have the potential to be used in food packaging.

Investigating the effects of chitosan/ tragacanth gum/ polyvinyl alcohol composite coating incorporated with cinnamon essential oil nanoemulsion on safety and quality features of chicken breast fillets during storage in the refrigerator

The present study investigated the effects of composite coatings made of chitosan (CS), tragacanth gum (TG), and polyvinyl alcohol (PVA) containing cinnamon essential oil (CEO) on the shelf-life of refrigerated chicken breast fillets. The samples were treated with different coating dispersions, and coded as: T1 (distilled water as control), T2 (blank composite coating), and T3 (composite coating containing CEO). Results showed that incorporating CEO into CS/TG/PVA coatings could significantly increase the quality of chicken fillets. The obtained results showed that after 21 days, the total microbial population of lactic acid bacteria (LAB), psychrotrophic and mesophilic bacteria in T3 samples was less than T1 and T2 samples. In addition, the highest antioxidant activity (48.04 %) and total phenolic content (TPC) values (2.458 mg gallic acid /g), the best sensory characteristics and the lowest pH (5.73), total volatile basic nitrogen (TVB-N) (21.89 mg N/100 g), thiobarbituric acid reactive substances (TBARS) (1.678 mg malondialdehyde equivalent/kg) and percentage of cooking loss (30 %) were related to T3. Results disclosed that this composite coating is a promising technology to improve the shelf life of chicken fillets during storage.

Study of alkali-soluble curdlan/bacterial cellulose/cinnamon essential oil blend films with enhanced mechanical properties

In response to the growing demand for biodegraded film with high mechanical properties for complex preservation application scenarios, we developed a curdlan (CD) blended films with exceptional mechanical strength through an alkali dissolution method. Notably, the alkali-soluble CD film exhibited five-fold increase in tensile strength (TS) when compared to its water-soluble counterpart. Furthermore, the inclusion of 2 % bacterial cellulose (BC) resulted in a significant 41.1 % augmentation of the film's TS. Thermal stability improvements were observed through differential scanning calorimetry (DSC) analysis and thermogravimetric analysis (TGA). X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) results provided insights into alterations in film crystallinity and intermolecular interactions. Specifically, the incorporation of 10 % CEO led to an additional improvement in TS. Our experimental investigations involving the packaging of chilled fresh meat with these blended films unveiled their capacity to effectively inhibit microorganism growth, maintain meat color stability, delay protein decomposition and fat oxidation, and extend the storage time up to 9 days. Our study offers a promising solution for food packaging, emphasizing the development of a high-strength degradable CD/BC/CEO blended film, which holds potential for extending the shelf life of food products.

Chemically Modified Nanoparticles for Enhanced Antioxidant and Antimicrobial Properties with Cinnamon Essential Oil

We explored the potential of different nanoparticles (TiO2, CaCO3, and Al2O3), considering their pure form and modified with cinnamon essential oil (CEO). These materials were characterized using various techniques, including FTIR spectroscopy, XRD analysis, TGA, and SEM. The interaction between CEO and nanoparticles changed depending on the nanoparticle type. Al2O3 nanoparticles exhibited the strongest interaction with CEO, increasing their antioxidant capacity by around 40% and their transfer of antimicrobial properties, particularly against Gram-negative bacteria. In contrast, TiO2 and CaCO3 nanoparticles showed limited interaction with CEO, resulting in lower antioxidant capacity and antimicrobial activity. Incorporating pure and CEO-modified nanoparticles into polylactic acid (PLA) films improved their mechanical and thermal properties, which are suitable for applications requiring greater strength. This research highlights the potential of metal oxide nanoparticles to enhance the antimicrobial and antioxidant capabilities of polymers. In addition, incorporating cinnamon essential oil can increase the antioxidant and antimicrobial effectiveness of the metal oxide nanoparticles and improve the mechanical and thermal properties of PLA films. Thus, these PLA films exhibit favorable characteristics for active packaging applications.

Preparation of an elderberry anthocyanin film and fresh-keeping effect of its application on fresh shrimps

A smart packaging film was developed employing the pH-indicating activity of elderberry anthocyanins to solve the problem of refrigerated food freshness monitoring. The effect of elderberry anthocyanins on the properties of gellan gum, gelatin composite films and preservation of fresh shrimp as an indicator of freshness was investigated. The results showed that the elderberry anthocyanin-gellan gum/gelatin film had improved on film thickness (7.8×10-2 mm), TS (tensile strength) (14.57×103 MPa), WVP (water vapor permeability) (36.96×10-8 g/m·s·Pa), and a reduced EAB (elongation at break) (17.92%), and water solubility (water-soluble time of 60.5 s). SEM (scanning electron microscopy) and FTIR (infrared spectrum analysis) showed excellent compatibility between its components. Moreover, the elderberry anthocyanin film exhibited good mechanical properties and pH indication effects. Therefore, the film can be considered suitable for maintaining the quality of fresh shrimp. The results could provide a reference for research and development into new active intelligent packaging films.

Performance analysis and structural characterization of flaxseed gum/chitosan/cinnamaldehyde composite films

The low mechanical strength, water deficiency, and oxidative protection of organic membranes impede their use as food-grade packaging materials. Cinnamaldehyde (CIN) tends to lose its activity owing to its instability. In this study, CIN was added to flaxseed gum (FG)/chitosan (CS) films prepared in a "sandwich" structure. The influence of CIN dosage on the properties of the composite films was studied, and the film formation mechanism of the membrane was explored. The elongation at break, water vapor permeability, oxygen permeability, and light transmittance of the composite film with 1.5% CIN were lower than those of the FG/CS/FG film. Supplementation of the composite membrane with CIN generated new hydrogen bonds, electrostatic interactions, and C-O-C bonds, which converted the structure of the composite film into a sheet and increased its crystallinity without markedly affecting its thermal stability. Therefore, CIN is an extremely useful additive for improving the applicability of flaxseed gum/CS membranes as food-grade packaging films.

Development of a novel 1-octen-3-ol-loaded agar/curdlan hydrogel for inhibiting peach fruit diseases

Our previous study found that 1-octen-3-ol fumigation treatment could effectively induce the resistance of peach fruit diseases. However, 1-octen-3-ol is a liquid fumigant, which is not conducive to storage and application. Herein, the gel of 1 % agar compound with 1 % curdlan was used as a novel material for covering 1-octen-3-ol. The interaction of agar and curdlan was promoted by adding 1-octen-3-ol, leading to a higher thermostability compared to single-component antibacterial gels. Moreover, 1-octen-3-ol resulted in changes in the internal structure and mechanical properties of gel to form a pore-like structure, which is beneficial to the retention and release of 1-octen-3-ol. Additionally, the 2 % agar gel containing 1-octen-3-ol had the best inhibitory effect on the mycelial growth of Monilinia fructicola and Rhizopus stolonifer in vitro, and the compound hydrogel of 1 % agar and 1 % curdlan with 1-octen-3-ol could most effectively inhibit brown rot and soft rot caused by these two pathogens in vivo. Overall, the data indicated that the novel 1-octen-3-ol-loaded agar/curdlan hydrogels could effectively retain and release 1-octen-3-ol, and induce the resistance of peach fruit diseases.

Effects of Thyme Essential Oil Microcapsules on the Antioxidant and Quality Characteristics of Mutton Patties

This study aimed to assess the stability of thyme essential oil microcapsules (TEOMs) and their impacts on the antioxidant properties and quality of lamb patties. The results demonstrated that gum Arabic effectively enhanced the stability of phenols within the thyme essential oil (TEO), with an optimal core/wall ratio of 1:8. Substituting TEO with TEOMs in lamb patties led to reductions in the thiobarbituric acid content, carbonyl content, sulfhydryl loss, and protein cross-linking. Additionally, the TEOMs positively influenced the mutton patties' color, texture, microbiological stability, and sensory attributes. These findings substantiate the idea that TEOMs exhibit significant potential as a natural preservative to enhance the quality of mutton patties.

Recent Trends in Active Packaging Using Nanotechnology to Inhibit Oxidation and Microbiological Growth in Muscle Foods

Muscle foods are highly perishable products that require the use of additives to inhibit lipid and protein oxidation and/or the growth of spoilage and pathogenic microorganisms. The reduction or replacement of additives used in the food industry is a current trend that requires the support of active-packaging technology to overcome novel challenges in muscle-food preservation. Several nano-sized active substances incorporated in the polymeric matrix of muscle-food packaging were discussed (nanocarriers and nanoparticles of essential oils, metal oxide, extracts, enzymes, bioactive peptides, surfactants, and bacteriophages). In addition, the extension of the shelf life and the inhibitory effects of oxidation and microbial growth obtained during storage were also extensively revised. The use of active packaging in muscle foods to inhibit oxidation and microbial growth is an alternative in the development of clean-label meat and meat products. Although the studies presented serve as a basis for future research, it is important to emphasize the importance of carrying out detailed studies of the possible migration of potentially toxic additives, incorporated in active packaging developed for muscle foods under different storage conditions.

Preparation and Characterization of a Novel Artemisia Oil Packaging Film and Its Application in Mango Preservation

In this work, a new food packaging film was synthesized via blending Artemisia oil (AO) into soybean protein isolate (SPI) and gelatin (Gel) for the postharvest storage of mango. The morphological architecture and mechanical properties of the films were characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), X-ray diffractometer (XRD), and other technologies. The results show that the prepared films had relatively flat surfaces with good mechanical properties. AO enhanced the light-blocking ability of the film, increased the hydrophobicity, and affected the moisture content and water solubility of the film to a certain extent. Furthermore, the antioxidant performance and antifungal (Colletotrichum gloeosporioides) capacity of the films increased with higher AO concentration due to the presence of the active components contained in AO. During mango storage applications, the films showed good freshness retention properties. The above results indicate that SPI-Gel films containing AO have excellent physicochemical and application properties and have great potential in the field of food packaging.

Fabrication, characterization and antimicrobial activity of chitosan/tragacanth gum/polyvinyl alcohol composite films incorporated with cinnamon essential oil nanoemulsion

The aim of this investigation was to prepare and characterize active composite films made of chitosan (CS), tragacanth gum (TG), polyvinyl alcohol (PVA) and loaded with different concentrations of cinnamon essential oil (CEO) nanoemulsion (CEO, 2 and 4 % v/v). For this purpose, the amount of CS was fixed and the ratio of TG to PVA (90:10, 80:20, 70:30, and 60:40) was considered variable. The physical (thickness and opacity), mechanical, antibacterial and water-resistance properties of the composite films were evaluated. According to the microbial tests, the optimal sample was determined and evaluated with several analytical instruments. CEO loading increased the thickness and EAB of composite films, while decreasing light transmission, tensile strength, and water vapor permeability. All the films containing CEO nanoemulsion had antimicrobial properties, but this activity was higher against Gram-positive bacteria (Bacillus cereus and Staphylococcus aureus) than Gram-negative types (Escherichia coli (O157:H7) and Salmonella typhimurium). According to the results of attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), thermogravimetric analysis (TGA) and X-ray diffraction (XRD), the interaction between the components of the composite film was confirmed. It can be concluded that the CEO nanoemulsion can be incorporated in CS/TG/PVA composite films and successfully used as active and environmentally friendly packaging.

Gelatin Improves the Performance of Oregano Essential Oil Nanoparticle Composite Films-Application to the Preservation of Mullet

In this study, the addition of oregano oil chitosan nanoparticles (OEO-CSNPs) was conducted to enhance the comprehensive properties of gelatin films (GA), and the optimal addition ratio of nanoparticles was determined for its application in the preservation of mullet. Oregano oil chitosan nanoparticles were organically combined with gelatin at different concentrations (0%, 2%, 4%, 6% and 8%) to obtain oregano oil-chitosan nanoparticle-GA-based composite films (G/OEO-CSNPs), and thereafter G/OEO-CSNPs were characterized and investigated for their preservative effects on mullet. Subsequent analysis revealed that OEO-CSNPs were uniformly dispersed in the GA matrix, and that G/OEO-CSNPs had significantly improved mechanical ability, UV-visible light blocking performance and thermal stability. Furthermore, the nanoparticles exhibited excellent antioxidant and antibacterial properties, and they improved the films' suitability as edible packaging. The attributes of the G/OEO-CSNPs were optimized, the films had the strongest radical scavenging and lowest water solubility, and electron microscopy also showed nanoparticle penetration into the polymer when the concentration of OEO-CSNPs was 6% (thickness = 0.092 ± 0.001, TS = 47.62 ± 0.37, E = 4.06 ± 0.17, water solubility = 48.00 ± 1.11). Furthermore, the GA-based composite film containing 6% OEO-CSNPs was able to inhibit microbial growth, slow fat decomposition and protein oxidation, reduce endogenous enzyme activity, and delay the spoilage of mullet during the refrigeration process, all of which indicate its excellent potential for meat preservation application.

Physical, Chemical, Barrier, and Antioxidant Properties of Pectin/Collagen Hydrogel-Based Films Enriched with Melissa officinalis

The essential oil extracted from Melissa officinalis (MOEO) exhibits a wide range of therapeutic properties, including antioxidant, antibacterial, and antifungal activities. The current research aimed to analyze the mechanical, barrier, chemical, and antioxidant properties of pectin and collagen-based films. Hydrogel-based films loaded with varying concentrations of MOEO (0.1%, 0.15%, and 0.2%) were prepared by solvent-casting method, and their physicochemical as well as antioxidant properties were examined. GC-MS analysis revealed the presence of major components in MOEO such as 2,6-octadienal, 3,7-dimethyl, citral, caryophyllene, geranyl acetate, caryophyllene oxide, citronellal, and linalool. Fourier transform infrared (FTIR) results revealed the interaction between components of the essential oil and polymer matrix. Scanning electron microscopy (SEM) revealed that films loaded with the highest concentration (0.2%) of MOEO showed more homogeneous structure with fewer particles, cracks, and pores as compared to control film sample. MOEO-incorporated films exhibited higher elongation at break (EAB) (30.24-36.29%) and thickness (0.068-0.073 mm); however, they displayed lower tensile strength (TS) (3.48-1.25 MPa) and transparency (87.30-82.80%). MOEO-loaded films demonstrated superior barrier properties against water vapors. According to the results, the incorporation of MOEO into pectin-collagen composite hydrogel-based films resulted in higher antioxidant properties, indicating that MOEO has the potential to be used in active food packaging material for potential applications.

Biopolymer-Based Sustainable Food Packaging Materials: Challenges, Solutions, and Applications

Biopolymer-based packaging materials have become of greater interest to the world due to their biodegradability, renewability, and biocompatibility. In recent years, numerous biopolymers-such as starch, chitosan, carrageenan, polylactic acid, etc.-have been investigated for their potential application in food packaging. Reinforcement agents such as nanofillers and active agents improve the properties of the biopolymers, making them suitable for active and intelligent packaging. Some of the packaging materials, e.g., cellulose, starch, polylactic acid, and polybutylene adipate terephthalate, are currently used in the packaging industry. The trend of using biopolymers in the packaging industry has increased immensely; therefore, many legislations have been approved by various organizations. This review article describes various challenges and possible solutions associated with food packaging materials. It covers a wide range of biopolymers used in food packaging and the limitations of using them in their pure form. Finally, a SWOT analysis is presented for biopolymers, and the future trends are discussed. Biopolymers are eco-friendly, biodegradable, nontoxic, renewable, and biocompatible alternatives to synthetic packaging materials. Research shows that biopolymer-based packaging materials are of great essence in combined form, and further studies are needed for them to be used as an alternative packaging material.

Whole-genome DNA methylation profiling reveals epigenetic signatures in developing muscle in Tan and Hu sheep and their offspring

Introduction

The Tan sheep is a popular local breed in China because of its tenderness and flavor. The Hu sheep breed is also famous for its high litter size, and its muscle growth rate is faster than that of Tan sheep. However, the epigenetic mechanism behind these muscle-related phenotypes is unknown.

Methods

In this study, the longissimus dorsi tissue from 18 6 month-old Tan sheep, Hu sheep, and Tan-Hu F2 generation (6 sheep per population) were collected. After genomic DNA extraction, whole-genome bisulfite sequencing (WGBS) and bioinformatics analysis were performed to construct genome-wide DNA methylome maps for the Tan sheep, Hu sheep and their Tan-Hu F2 generation.

Results

Distinct genome-wide DNA methylation patterns were observed between Tan sheep and Hu sheep. Moreover, DNA methylated regions were significantly increased in the skeletal muscle from Tan sheep vs. the F2 generation compared to the Hu sheep vs. F2 generation and the Tan sheep vs. Hu sheep. Compared with Hu sheep, the methylation levels of actin alpha 1 (ACTA1), myosin heavy chain 11 (MYH11), Wiskott-Aldrich syndrome protein (WAS), vav guanine nucleotide exchange factor 1 (VAV1), fibronectin 1 (FN1) and Rho-associated protein kinase 2 (ROCK2) genes were markedly distinct in the Tan sheep. Furthermore, Gene Ontology analysis indicated that these genes were involved in myotube differentiation, myotube cell development, smooth muscle cell differentiation and striated muscle cell differentiation.

Conclusion

The findings from this study, in addition to data from previous research, demonstrated that the ACTA1, MYH11, WAS, VAV1, FN1, and ROCK2 genes may exert regulatory effects on muscle development.

Replacement of polyethylene oxide by peach gum to produce an active film using Litsea cubeba essential oil and its application in beef

This study evaluated the effects of adding various concentrations (0 %, 1 %, 2 %, and 3 %) of peach gum (PG) to films made from polyethylene oxide (PEO) combined with Litsea cubeba essential oil (LCEO) to be utilized as active packaging for food in the future. The findings showed that the film containing PG 2 % concentration had the best physic-mechanical properties. In films made with PG, the glass transition temperature was significantly improved. Combining PG and PEO resulted in films that were brighter in color, had lower WVP values, and had the lowest water activity. Furthermore, XRD demonstrated that PG additions were compatible with the film of PEO blended with LCEO. The PG films formulated with PG presented high antioxidant and antibacterial activity against Staphylococcus aureus and E. coli. Wrapping beef with P2G2 film led to maintaining its quality with suitable levels of pH, TBARS, and TVB-N. This also decreased the number of E. coli and S. aureus in beef throughout the storage period. The results indicate that adding PG to PEO films enhances their suitability for food preservation.

Preparation and characterization of carboxymethyl chitosan/pullulan composite film incorporated with eugenol and its application in the preservation of chilled meat

To solve the problem of easy spoilage of chilled meat during storage, we fabricated a novel composite film using carboxymethyl chitosan (CMCS)/pullulan (Pul)/eugenol (E) by casting method. The results showed that the mechanical properties of the films were better when the CMCS/Pul ratio was 2.5/2.5. The Fourier transform infrared spectroscopy (FTIR) results showed that intermolecular hydrogen bonds were formed among E, CMCS, and Pul, which was consistent with the rheological test results. Scanning electron microscopic (SEM) images showed that eugenol was well dispersed in the CMCS/Pul matrix. The addition of eugenol significantly increased the antibacterial properties and antioxidant properties. Moreover, when 5% eugenol was added, the water vapor permeability (WVP) of the film reduced to 2.41 × 10^-11 g/m·s·Pa. Finally, the freshness of the chilled meat wrapped with the eugenol-containing composite film was prolonged, thereby offering a potential alternative to synthetic materials.

Effects of ginger essential oil on physicochemical and structural properties of agar‑sodium alginate bilayer film and its application to beef refrigeration

To maintain the freshness of meat products, an agar‑sodium alginate (AS) bilayer antibacterial film incorporated with ginger essential oil (GEO) was developed. The effect of GEO at different concentrations (1%, 2%, 3% and 4% v/v) on the physical properties, micro-structure and antibacterial activity closely related to AS film's application to beef refrigeration was extensively studied. In addition, the effects of AS bilayer active film on refrigeration quality and shelf life of beef were systematically evaluated. The porous structure and number of oil droplets became more obvious with the increase of GEO amount in AS film. The incorporation and increase of GEO could delay the lipid oxidation and protein decomposition of beef, reduce the total counts of the tested microorganisms (total viable bacteria, psychrotrophic bacteria, Escherichia coli, Staphylococcus aureus, yeast, and mold) in meat samples. Compared with commercial polyethylene (PE) packaging, the accumulation of basic compounds from the degradation of beef protein as well as the microbial contamination was obviously improved, which could extend the comprehensive shelf life of beef by 4-6 days. Consequently, AS bilayer films incorporated with GEO, especially GEO at 4.0% (v/v) GEO concentration can be developed to be an antibacterial active packaging material for beef refrigeration.

Characterizations of konjac glucomannan/curdlan edible coatings and the preservation effect on cherry tomatoes

In this study, konjac glucomannan (KGM) and curdlan were used to fabricate composite coating (KC). The coating solutions were investigated using a rheological method, and the coatings were characterized by water solubility tests, water vapor permeability (WVP), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The preservation effect of KC coating on cherry tomatoes stored at room temperature was determined. Results indicated that the curdlan addition can adjust the hydrophilicity/hydrophobicity of KGM coatings. Curdlan addition enhanced intermolecular entanglement and film-forming property. Increasing curdlan content in KC coatings significantly decreased the moisture content, dissolution and swelling ratio, and WVP. The KGM-curdlan composites behaved as high-performance coatings with good compatibility and uniformity. The K₃C₂ coating showed the best uniformity, water barrier, and thermal stability. The application of K₃C₂ coating significantly reduced the weight loss, decay loss, and delayed the decreases of firmness, soluble solids, total acid, and VC contents of cherry tomatoes. The KGM/curdlan edible coatings have promising potential for prolonging the shelf life of cherry tomatoes and applications in fruits preservation in the future.

An eco-friendly chitosan/cellulose acetate hybrid nanostructure containing Ziziphora clinopodioides essential oils for active food packaging applications

This work presents the fabrication and characterization of a hybrid nanostructure, Ziziphora clinopodioides essential oils (ZEO)-loaded chitosan nanoparticles (CSNPs-ZEO) embedded into cellulose acetate (CA) nanofibers (CA-CSNPs-ZEO). The CSNPs-ZEO were first synthesized through the ionic gelation method. Then, through simultaneous electrospraying and electrospinning processes, the nanoparticles were embedded in the CA nanofibers. The morphological and physicochemical characteristics of the prepared nanostructures were evaluated using different methods, including scanning electron microscopy (SEM), water vapor permeability (WVP), moisture content (MC), mechanical testing, differential scanning calorimetry (DSC), and release profile studies. The antibacterial activity of the nanostructures was explored on raw beef as a food model during 12 days of storage at 4 °C. The obtained results indicated the successful synthesis of CSNPs-ZEO nanoparticles with an average size of 267 ± 6 nm and their incorporation into the nanofibers matrix. Moreover, the CA-CSNPs-ZEO nanostructure showed a lower water vapor barrier and higher tensile strength compared with ZEO-loaded CA (CA-ZEO) nanofiber. The CA-CSNPs-ZEO nanostructure also exhibited strong antibacterial activity, which effectively extended the shelf-life of raw beef. The results demonstrated a strong potential for innovative hybrid nanostructures in active packaging to maintain the quality of perishable food products.

Sustainable and Bio-Based Food Packaging: A Review on Past and Current Design Innovations

Food loss and waste occur for many reasons, from crop processing to household leftovers. Even though some waste generation is unavoidable, a considerable amount is due to supply chain inefficiencies and damage during transport and handling. Packaging design and materials innovations represent real opportunities to reduce food waste within the supply chain. Besides, changes in people's lifestyles have increased the demand for high-quality, fresh, minimally processed, and ready-to-eat food products with extended shelf-life, that need to meet strict and constantly renewed food safety regulations. In this regard, accurate monitoring of food quality and spoilage is necessary to diminish both health hazards and food waste. Thus, this work provides an overview of the most recent advances in the investigation and development of food packaging materials and design with the aim to improve food chain sustainability. Enhanced barrier and surface properties as well as active materials for food conservation are reviewed. Likewise, the function, importance, current availability, and future trends of intelligent and smart packaging systems are presented, especially considering biobased sensor development by 3D printing technology. In addition, driving factors affecting fully biobased packaging design and materials development and production are discussed, considering byproducts and waste minimization and revalorization, recyclability, biodegradability, and other possible ends-of-life and their impact on product/package system sustainability.

Enhancement of water barrier and antimicrobial properties of chitosan/gelatin films by hydrophobic deep eutectic solvent

Biodegradable chitosan/gelatin (CS/GEL) films have attracted attention as food packaging, but the poor water sensitivity and functional limitations of these films should be addressed. In this study, the hydrophobic deep eutectic solvent (DES, 0-15 %) consisting of thymol and octanoic acid was used to improve the water resistance and antibacterial performance of the CS/GEL composite films. FTIR and SEM analyses revealed a strong interaction between the CS/GEL matrix and DES. The films blended with DES showed increased water contact angle values and thermal stability. Furthermore, the addition of DES resulted in a significant increase in the elasticity and decrease water vapor transmission rate (WVTR). The CS/GEL films blended with 9% DES showed a 38.5% decrease in WVTR compared to those without DES. Additionally, the DES-containing film displayed good antibacterial activity against Staphylococcus aureus and Escherichia coli. Overall, the CS/GEL-DES composite films are expected to contribute an improvement to food packaging.

Biodegradable edible film based on basil seed gum: the effect of gum and plasticizer concentrations.. [DOI: 10.21203/rs.3.rs-2626369/v1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

In this research, edible films produced from basil seed gum (BSG) with 3 different gum (0.5%, 1%, 1.5%) and plasticizer concentrations (1%, 3%, 5%) were developed, and the physical, thermal, barrier and microstructural properties of these films were measured. As a result of XRD, AFM, DSC, and FT-IR spectroscopy analyses, it was concluded that the mechanical and barrier properties and thermal stability of BSG-based films are quite good. The increase in gum and glycerol concentrations increased the crystallinity also strengthened the mechanical and barrier properties of the film. Also, films with low gum and high glycerol ratio have almost smooth surfaces and appropriate transparency for packaging applications. As the glycerol and BSG concentration increased, WVP values of the films increased. The complete dissolution of this film in the soil within 60 days, even at the highest gum concentration, showed that this material could be considered eco-friendly packaging. For this reason, it is thought that BSG-based films and coatings with suitable gum and plasticizer concentrations can be a potential packaging material for foods since they can be obtained at low cost, have a very good barrier, thermal and structural properties, and are edible and biodegradable.

Production, characterization, and antimicrobial activity of almond gum/polyvinyl alcohol/chitosan composite films containing thyme essential oil nanoemulsion for extending the shelf-life of chicken breast fillets

In this study, thyme essential oil (TEO) nanoemulsion was immobilized within composite films based on almond gum (AG), polyvinyl alcohol (PVA), and chitosan (CS). The physical, mechanical, water barrier, microstructural and antimicrobial properties of composite films were assessed. Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the intermolecular interactions in the composite film matrix. The results indicated that the incorporation of TEO into the composite films increased thickness, moisture content, and water vapor permeability, while it reduced light transmittance and transparency value. The antimicrobial activity of films against gram-negative and gram-positive bacteria was tested using a disc diffusion method. The effect of composite on the microbiological properties of chicken breast fillets was investigated during refrigerated storage for 21 days. The microbial populations of total mesophilic, psychrotrophic, and lactic acid bacteria of the samples that were coated with the composite containing TEO were lower than the permitted limit after 21 days while for blank samples they were higher than 7 log CFU/g after 7 days which is considered as the maximum acceptable total count limit. Results disclosed that AG/PVA/CS composite films containing TEO nanoemulsion can be applied as eco-friendly active food packaging to enhance the shelf-life of food products.

Biopolymer Food Packaging Films Incorporated with Essential Oils

Petroleum-based packaging materials are typically nonbiodegradable, which leads to significant adverse environmental and health issues. Therefore, developing novel efficient, biodegradable, and nontoxic food packaging film materials has attracted increasing attention from researchers. Due to significant research and advanced technology, synthetic additives in packaging materials are progressively replaced with natural substances such as essential oils (EOs). EOs demonstrate favorable antioxidant and antibacterial properties, which would be an economical and effective alternative to synthetic additives. This review summarized the possible antioxidant and antimicrobial mechanisms of various EOs. We analyzed the properties and performance of food packaging films based on various biopolymers incorporated with EOs. The progress in intelligent packaging materials has been discussed as a prospect of food packaging materials. Finally, the current challenges regarding the practical application of EOs-containing biopolymer films in food packaging and areas of future research have been summarized.

Aloe barbadensis Based Bioactive Edible Film Improved Lipid Stability and Microbial Quality of the Cheese

An attempt was made to develop a bioactive edible film using carrageenan and A. vera gel for enhancing the storage quality of cheese using kalari, a popular Himalayan cheese, as a food-model system. The film was evaluated for various physicomechanical and oxidative properties (ABTS (2,2-azino-bis (3-ethylbenzothiazoline-6-sulfonate)) and DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging activities, total flavonoid and phenolic contents). Based on preliminary trials, 1% A. vera gel was found to be optimum. The addition of the gel resulted in a significant decrease in moisture content, transparency, solubility, and water-vapor transmission rate and increased the thickness and density of the film. The film showed antimicrobial properties against E. coli and significantly (p < 0.05) decreased the lipid-oxidation (thiobarbituric acid reactive substances, free-fatty acids, and peroxide values) and increased microbial-quality (total-plate, psychrophilic, and yeast/molds) of the samples during 4-week refrigerated storage (4 ± 1 °C). The film also exhibited a significant positive impact on the sensory quality of the cheese, indicating the potential for commercial applications for quality control of cheese during storage.

Biodegradable Active Packaging Material Containing Grape Seed Ethanol Extract and Corn Starch/κ-Carrageenan Composite Film

An active film composed of corn starch/κ-carrageenan and ethanolic grape seed extract (0, 1, 3, and 5 wt% of GSE on corn starch basis) were successfully prepared using the solvent casting technique. The effects of the different concentrations of ethanolic grape seed extract (GSE) on the physicochemical properties, antioxidant properties, and antibacterial properties of CS/κC films were analyzed. The results showed that the addition of GSE inhibited the recrystallization of starch in the composite film. The glass transition temperature of composite film is 121.65 °C. With the addition of GSE, the surface roughness of the composite film increased, and the cross-section displayed a stratification phenomenon. Meanwhile, when GSE was added to the composite film, the tensile strength of the composite film decreased (3.50 ± 0.27 MPa), the elongation at break increased (36.87 ± 2.08%), and the WVP increased (1.58 ± 0.03 g mm/m2·d· kPa). With the increase of the concentration of GSE in the composite film, the a* value and b* value of the composite film increase, the L* value decreases, and the opacity increases. The lipid oxidation test proved that the composite films containing 1% GSE has a significant inhibitory effect on the oxidation of lard (p < 0.05). The above results indicate that the GSE can be used as a food-grade packaging material and has a good application prospect in the food industry.

Preparation and Physiochemical Characterization of Bitter Orange Oil Loaded Sodium Alginate and Casein Based Edible Films

Biopolymers-based composite edible films are gaining interest in the food packaging industry due to their sustainable nature and diverse biological activities. In the current study, we used sodium alginate (SA) and casein (CA) for the fabrication of composite film using the casting method. We also added orange oil to the edible film and assessed its impact on the biological, chemical, physical, and barrier properties of the films. The fabricated films were analyzed using X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). It was observed that CA–SA films loaded with 1.5% OEO had better visual attributes, and a further increase in oil concentration was not found to be as favorable. Mechanical assessment of the films revealed that CA–SA-OEO (1.5%) film showed lower puncture deformation and higher puncture force values. XRD data showed that all samples exhibited peaks at similar positions (21° of 2θ) with different intensities. In FTIR analysis, characteristic peaks of the film components (sodium alginate, casein, and orange oil) were reported at corresponding positions. The thermal stability of films was enhanced after the addition of the OEO (1.5%), however, a greater increase in OEO caused a decrease in the thermal stability, observed during TGA analysis. Moreover, the surface of the blank CA–SA film (FL1) was found to be rough (with cracks) compared to CA–SA films (FL2) containing 1.5% OEO. Additionally, FL2 was found to be relatively better than the other samples in terms of swelling degree (SD), thickness, water solubility (WS), oxygen permeability (OP), water vapor permeability (WVP), moisture content (MC), and transparency (T).

Application of Ag@SiO2 nanoparticles within PVA to reduce growth of E. coli and S. aureus in beef patties

To overcome defects of polyvinyl alcohol (PVA) and expand its applications in food preservation, PVA/Ag@SiO₂ nanocomposite films were prepared using the solution intercalation film-casting method. Transmission electron microscopy, X-ray diffraction, and UV-visible absorption spectra were applied to confirm the synthesis of the nanoparticles (NPs). Effects of Ag@SiO₂ NPs on physicochemical characteristics of films like viscosity, swelling ratio, tensile strength, elongation at break, as well as antibacterial activity were also evaluated. Results indicate that Ag@SiO₂ NPs could be synthesized successfully, and the increasing concentration of Ag@SiO₂ NPs led to the decrease in viscosity and the swelling ratio of the PVA/Ag@SiO₂ NPs nanocomposite films. PVA/Ag@SiO₂ nanocomposite films exhibited increased tensile strength and strong antibacterial activity against Escherichia coli and Staphylococcus aureus. The films had higher antibacterial activity toward E. coli compared with S. aureus. Beef patties were applied to verify the practicality of PVA/Ag@SiO₂ films. PVA/Ag@SiO₂ NPs nanocomposite films act as an active food packaging system showing great potential in retaining food safety and prolonging the shelf-life of packaged foods. PRACTICAL APPLICATION: During the storage of fresh meat, the microbial count on the meat surface increased with increasing storage time; meat proteins could be broken down by microorganisms, causing the tissue structure to be destroyed, leading to loose muscle fibers and loss of nutrient-containing juices. In this paper, by improving the PVA film, a new antibacterial membrane was prepared, which can be used for fresh meat sold in supermarkets, as a lining at the bottom of the meat or directly covering the meat. The method can significantly decrease the number of microorganisms and extend the shelf-life of fresh meat.

Nanoencapsulation of essential oils from industrial hemp (Cannabis sativa L.) by-products into alfalfa protein nanoparticles

Essential oils of industrial hemp (Cannabis sativa L.) by-products (HBEO) were characterized by gas chromatography-mass spectrometry (GC-MS); then, encapsulated in alfalfa protein isolate nanoparticles (API-NPs) as a novel nanocarrier. A desirable retention (45.5-63.4%) of HBEO within API-NPs was confirmed. These nanoparticles exhibited a shrunk and globular shape with a size range of 156.9-325.9 nm as indicated by dynamic light scattering (DLS), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Furthermore, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and thermal analyses corroborated that HBEO was successfully encapsulated within API NPs in an amorphous form without specific chemical interaction with the carrier matrix. The antioxidant activity of loaded HBEO into API-NPs was higher than free HBEO implying that encapsulation of HBEO in API-NPs was an efficient strategy for improving its stability and functionality. HBEO-loaded API-NPs is a promising candidate to be used in future foods and supplements for novel applications.