1
|
Liang X, Zhang M, Chong CM, Lin D, Chen S, Zhen Y, Ding H, Zhong HJ. Recent Advances in the 3D Printing of Conductive Hydrogels for Sensor Applications: A Review. Polymers (Basel) 2024; 16:2131. [PMID: 39125157 PMCID: PMC11314299 DOI: 10.3390/polym16152131] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/24/2024] [Revised: 07/21/2024] [Accepted: 07/24/2024] [Indexed: 08/12/2024] Open
Abstract
Conductive hydrogels, known for their flexibility, biocompatibility, and conductivity, have found extensive applications in fields such as healthcare, environmental monitoring, and soft robotics. Recent advancements in 3D printing technologies have transformed the fabrication of conductive hydrogels, creating new opportunities for sensing applications. This review provides a comprehensive overview of the advancements in the fabrication and application of 3D-printed conductive hydrogel sensors. First, the basic principles and fabrication techniques of conductive hydrogels are briefly reviewed. We then explore various 3D printing methods for conductive hydrogels, discussing their respective strengths and limitations. The review also summarizes the applications of 3D-printed conductive hydrogel-based sensors. In addition, perspectives on 3D-printed conductive hydrogel sensors are highlighted. This review aims to equip researchers and engineers with insights into the current landscape of 3D-printed conductive hydrogel sensors and to inspire future innovations in this promising field.
Collapse
Affiliation(s)
- Xiaoxu Liang
- Foundation Department, Guangzhou Maritime University, Guangzhou 510725, China; (X.L.); (M.Z.)
| | - Minghui Zhang
- Foundation Department, Guangzhou Maritime University, Guangzhou 510725, China; (X.L.); (M.Z.)
| | - Cheong-Meng Chong
- State Key Laboratory of Quality Research in Chinese Medicine, Institute of Chinese Medical Sciences, University of Macau, Macao 999078, China;
| | - Danlei Lin
- State Key Laboratory of Bioactive Molecules and Druggability Assessment, Jinan University, Guangzhou 510632, China; (D.L.); (S.C.); (Y.Z.)
| | - Shiji Chen
- State Key Laboratory of Bioactive Molecules and Druggability Assessment, Jinan University, Guangzhou 510632, China; (D.L.); (S.C.); (Y.Z.)
| | - Yumiao Zhen
- State Key Laboratory of Bioactive Molecules and Druggability Assessment, Jinan University, Guangzhou 510632, China; (D.L.); (S.C.); (Y.Z.)
| | - Hongyao Ding
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China
| | - Hai-Jing Zhong
- State Key Laboratory of Bioactive Molecules and Druggability Assessment, Jinan University, Guangzhou 510632, China; (D.L.); (S.C.); (Y.Z.)
| |
Collapse
|
2
|
Liang X, Lin D, Zhang W, Chen S, Ding H, Zhong HJ. Progress in the Preparation and Application of Inulin-Based Hydrogels. Polymers (Basel) 2024; 16:1492. [PMID: 38891439 PMCID: PMC11174702 DOI: 10.3390/polym16111492] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2024] [Revised: 05/15/2024] [Accepted: 05/22/2024] [Indexed: 06/21/2024] Open
Abstract
Inulin, a natural polysaccharide, has emerged as a promising precursor for the preparation of hydrogels due to its biocompatibility, biodegradability, and structural versatility. This review provides a comprehensive overview of the recent progress in the preparation, characterization, and diverse applications of inulin-based hydrogels. Different synthesis strategies, including physical methods (thermal induction and non-thermal induction), chemical methods (free-radical polymerization and chemical crosslinking), and enzymatic approaches, are discussed in detail. The unique properties of inulin-based hydrogels, such as stimuli-responsiveness, antibacterial activity, and their potential as fat replacers, are highlighted. Special emphasis is given to their promising applications in drug delivery systems, especially for colon-targeted delivery, due to the selective degradation of inulin via colonic microflora. The ability to incorporate both hydrophilic and hydrophobic drugs further expands their therapeutic potential. In addition, the applications of inulin-based hydrogels in responsive materials, the food industry, wound dressings, and tissue engineering are discussed. While significant progress has been achieved, challenges and prospects in optimizing synthesis, improving mechanical properties, and exploring new functionalities are discussed. Overall, this review highlights the remarkable properties of inulin-based hydrogels as a promising class of biomaterials with immense potential in the biomedical, pharmaceutical, and materials science fields.
Collapse
Affiliation(s)
- Xiaoxu Liang
- Foundation Department, Guangzhou Maritime University, Guangzhou 510725, China;
| | - Danlei Lin
- State Key Laboratory of Bioactive Molecules and Druggability Assessment, Jinan University, Guangzhou 510632, China; (D.L.); (W.Z.); (S.C.)
| | - Wen Zhang
- State Key Laboratory of Bioactive Molecules and Druggability Assessment, Jinan University, Guangzhou 510632, China; (D.L.); (W.Z.); (S.C.)
| | - Shiji Chen
- State Key Laboratory of Bioactive Molecules and Druggability Assessment, Jinan University, Guangzhou 510632, China; (D.L.); (W.Z.); (S.C.)
| | - Hongyao Ding
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China
| | - Hai-Jing Zhong
- State Key Laboratory of Bioactive Molecules and Druggability Assessment, Jinan University, Guangzhou 510632, China; (D.L.); (W.Z.); (S.C.)
| |
Collapse
|
3
|
Chen X, Cui J, Liu Z, Wang Y, Li M, Zhang J, Pan S, Wang M, Bao C, Wei Q. Polyacrylamide/sodium alginate/sodium chloride photochromic hydrogel with high conductivity, anti-freezing property and fast response for information storage and electronic skin. Int J Biol Macromol 2024; 268:131972. [PMID: 38697436 DOI: 10.1016/j.ijbiomac.2024.131972] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/11/2024] [Revised: 04/07/2024] [Accepted: 04/28/2024] [Indexed: 05/05/2024]
Abstract
Photochromic hydrogels have promising prospects in areas such as wearable device, information encryption technology, optoelectronic display technology, and electronic skin. However, there are strict requirements for the properties of photochromic hydrogels in practical engineering applications, especially in some extreme application environments. The preparation of photochromic hydrogels with high transparency, high toughness, fast response, colour reversibility, excellent electrical conductivity, and anti-freezing property remains a challenge. In this study, a novel photochromic hydrogel (PAAm/SA/NaCl-Mo7) was prepared by loading ammonium molybdate (Mo7) and sodium chloride (NaCl) into a dual-network hydrogel of polyacrylamide (PAAm) and sodium alginate (SA) using a simple one-pot method. PAAm/SA/NaCl-Mo7 hydrogel has excellent conductivity (175.9 S/cm), water retention capacity and anti-freezing properties, which can work normally at a low temperature of -28.4 °C. In addition, the prepared PAAm/SA/NaCl-Mo7 hydrogel exhibits fast response (<15 s), high transparency (>70 %), good toughness (maximum elongation up to 1500 %), good cyclic compression properties at high compressive strains (60 %), good biocompatibility (78.5 %), stable reversible discolouration and excellent sensing properties, which can be used for photoelectric display, information storage and motion monitoring. This work provides a new inspiration for the development of flexible electronic skin devices.
Collapse
Affiliation(s)
- Xiaohu Chen
- Department of Indurstry and Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China; Bio-additive manufacturing university-enterprise joint research center of Shaanxi Province, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China
| | - Jiashu Cui
- Department of Indurstry and Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China; Bio-additive manufacturing university-enterprise joint research center of Shaanxi Province, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China
| | - Zhisheng Liu
- Department of Indurstry and Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China; Bio-additive manufacturing university-enterprise joint research center of Shaanxi Province, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China
| | - Yanen Wang
- Department of Indurstry and Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China; Bio-additive manufacturing university-enterprise joint research center of Shaanxi Province, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China.
| | - Mingyang Li
- Department of Indurstry and Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China; Bio-additive manufacturing university-enterprise joint research center of Shaanxi Province, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China
| | - Juan Zhang
- Department of Indurstry and Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China; Bio-additive manufacturing university-enterprise joint research center of Shaanxi Province, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China
| | - Siyu Pan
- Department of Indurstry and Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China; Bio-additive manufacturing university-enterprise joint research center of Shaanxi Province, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China
| | - Mengjie Wang
- Department of Indurstry and Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China; Bio-additive manufacturing university-enterprise joint research center of Shaanxi Province, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China
| | - Chengwei Bao
- Department of Indurstry and Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China; Bio-additive manufacturing university-enterprise joint research center of Shaanxi Province, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China
| | - Qinghua Wei
- Department of Indurstry and Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China; Bio-additive manufacturing university-enterprise joint research center of Shaanxi Province, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, PR China.
| |
Collapse
|
4
|
Patel DK, Won SY, Patil TV, Dutta SD, Lim KT, Han SS. Unzipped carbon nanotubes assisted 3D printable functionalized chitosan hydrogels for strain sensing applications. Int J Biol Macromol 2024; 265:131025. [PMID: 38513895 DOI: 10.1016/j.ijbiomac.2024.131025] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/04/2024] [Revised: 03/15/2024] [Accepted: 03/18/2024] [Indexed: 03/23/2024]
Abstract
Developing multifunctional hydrogels for wearable strain sensors has received significant attention due to their diverse applications, including human motion detection, personalized healthcare, soft robotics, and human-machine interfaces. However, integrating the required characteristics into one component remains challenging. To overcome these limitations, we synthesized multifunctional hydrogels using carboxymethyl chitosan (CMCS) and unzipped carbon nanotubes (f-CNTs) as strain sensor via a one-pot strategy. The polar groups in CMCS and f-CNTs enhance the properties of the hydrogels through different interactions. The hydrogels show superior printability with a uniformity factor (U) of 0.996 ± 0.049, close to 1. The f-CNTs-assisted hydrogels showed improved storage modulus (8.8 × 105 Pa) than the pure polymer hydrogel. The hydrogels adequately adhered to different surfaces, including human skin, plastic, plastic/glass interfaces, and printed polymers. The hydrogels demonstrated rapid self-healing and good conductivity. The biocompatibility of the hydrogels was assessed using human fibroblast cells. No adverse effects were observed with hydrogels, showing their biocompatibility. Furthermore, hydrogels exhibited antibacterial potential against Escherichia coli. The developed hydrogel exhibited unidirectional motion and complex letter recognition potential with a strain sensitivity of 2.4 at 210 % strain. The developed hydrogels could explore developing wearable electronic devices for detecting human motion.
Collapse
Affiliation(s)
- Dinesh K Patel
- School of Chemical Engineering, Yeungnam University, 280-Daehak-ro, Gyeongsan 38541, Republic of Korea
| | - So-Yeon Won
- School of Chemical Engineering, Yeungnam University, 280-Daehak-ro, Gyeongsan 38541, Republic of Korea
| | - Tejal V Patil
- Department of Biosystems Engineering, Institute of Forest Science, Kangwon National University, Chuncheon 24341, Republic of Korea
| | - Sayan Deb Dutta
- Department of Biosystems Engineering, Institute of Forest Science, Kangwon National University, Chuncheon 24341, Republic of Korea
| | - Ki-Taek Lim
- Department of Biosystems Engineering, Institute of Forest Science, Kangwon National University, Chuncheon 24341, Republic of Korea.
| | - Sung Soo Han
- School of Chemical Engineering, Yeungnam University, 280-Daehak-ro, Gyeongsan 38541, Republic of Korea.
| |
Collapse
|
5
|
Ding H, Liu J, Huo P, Ding R, Shen X, Mao H, Wen Y, Li H, Wu ZL. Ultra-stretchable and conductive polyacrylamide/carboxymethyl chitosan composite hydrogels with low modulus and fast self-recoverability as flexible strain sensors. Int J Biol Macromol 2023; 253:127146. [PMID: 37778581 DOI: 10.1016/j.ijbiomac.2023.127146] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2023] [Revised: 09/27/2023] [Accepted: 09/28/2023] [Indexed: 10/03/2023]
Abstract
There is a great demand for the fabrication of soft electronics using hydrogels due to their biomimetic structures and good flexibility. However, conventional hydrogels have poor mechanical properties, which restricts their applications as stretchable sensors. Herein, a facile one-step strategy is proposed to fabricate tough and conductive hydrogels by making use of the graftability of carboxymethyl chitosan without extra conductive matter and crosslinking agent. The obtained polyacrylamide/carboxymethyl chitosan composite hydrogels possess outstanding transmittance and excellent mechanical performances, with tensile breaking stress of 630 kPa, breaking strain of 4560 %, toughness of 8490 kJ/m3. These hydrogels have low modulus of 5-20 kPa, fast recoverability after unloading, high conductivity of ∼0.85 S/m without the addition of other conductive substances and good biocompatibility. The ionic conductivity of the gels originates from the counterions of carboxymethyl chitosan, affording the hydrogels as resistive-type sensors. The resultant hydrogel sensors demonstrate a broad strain window (0.12-1500 %), excellent linear response, high sensitivity with the gauge factor reaching 11.72, and great durability, capable of monitoring diverse human motions. This work provides a new strategy to develop stretchable conductive hydrogels with promising applications in the fields of artificial intelligence and flexible electronics.
Collapse
Affiliation(s)
- Hongyao Ding
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China
| | - Jie Liu
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China
| | - Peixian Huo
- Joint Key Laboratory of the Ministry of Education, Institute of Applied Physics and Materials Engineering, University of Macau, Avenida da Universidade, Taipa, Macau SAR, China
| | - Rongjian Ding
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China
| | - Xiaodong Shen
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China
| | - Hongli Mao
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China
| | - Yuefang Wen
- Key Laboratory for Light-weight Materials, Nanjing Tech University, Nanjing 210009, China
| | - Hui Li
- Key Laboratory for Light-weight Materials, Nanjing Tech University, Nanjing 210009, China.
| | - Zi Liang Wu
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China
| |
Collapse
|
6
|
Li X, Sánchez Del Río Sáez J, Du S, Sánchez Díaz R, Ao X, Wang DY. Bio-based chitosan-based film as a bifunctional fire-warning and humidity sensor. Int J Biol Macromol 2023; 253:126466. [PMID: 37659494 DOI: 10.1016/j.ijbiomac.2023.126466] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/12/2023] [Revised: 07/25/2023] [Accepted: 08/21/2023] [Indexed: 09/04/2023]
Abstract
Early fire detection is an efficient method to mitigate disastrous fire loss. However, developing smart low-temperature fire-warning sensors that better diminish fire hazards, especially those caused by household appliances, is still challenging. Herein, a salts-modified chitosan (salts-modified CS) based sensor with integrated fire-warning and humidity-monitoring capability is proposed using an easy assembling method. This sensor can respond to temperatures as low as 50 °C and a flame within 2 s quickly and detect relative humidity (RH) range above 50 % at 50 °C and 75 °C sensitively. This system can be reusable for multiple ignitions and works in high-humidity environments (>50 %). Furthermore, the comparison between different salts-modified CS films is carried out to elucidate the mechanism of the formation of electric current under the joint driven by temperature and humidity. Moreover, real-time temperature and RH monitoring can be achieved with a wireless transmission section. This design shows a promising approach for multifunctional CS-based sensors and paves a path to developing a new generation of smart fire-warning detectors.
Collapse
Affiliation(s)
- Xiaolu Li
- IMDEA Materials Institute, C/Eric Kandel, 2, 28906 Getafe, Madrid, Spain; E.T.S. de Ingenieros de Caminos, Universidad Politécnica de Madrid, Calle Profesor Aranguren 3, 28040, Madrid, Spain
| | - José Sánchez Del Río Sáez
- IMDEA Materials Institute, C/Eric Kandel, 2, 28906 Getafe, Madrid, Spain; Departamento de Ingeniería Eléctrica, Electrónica Automática y Física Aplicada, ETSIDI, Universidad Politécnica de Madrid, Ronda de Valencia 3, 28012, Madrid, Spain
| | - Shuanglan Du
- IMDEA Materials Institute, C/Eric Kandel, 2, 28906 Getafe, Madrid, Spain; E.T.S. de Ingenieros de Caminos, Universidad Politécnica de Madrid, Calle Profesor Aranguren 3, 28040, Madrid, Spain
| | | | - Xiang Ao
- IMDEA Materials Institute, C/Eric Kandel, 2, 28906 Getafe, Madrid, Spain; E.T.S. de Ingenieros de Caminos, Universidad Politécnica de Madrid, Calle Profesor Aranguren 3, 28040, Madrid, Spain
| | - De-Yi Wang
- IMDEA Materials Institute, C/Eric Kandel, 2, 28906 Getafe, Madrid, Spain.
| |
Collapse
|
7
|
Zhang H, Zhang D, Luan H, Wang Z, Zhang P, Xi G, Ji X. Multifunctional, Self-Adhesive MXene-Based Hydrogel Flexible Strain Sensors for Hand-Written Digit Recognition with Assistance of Deep Learning. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2023; 39:16199-16207. [PMID: 37906584 DOI: 10.1021/acs.langmuir.3c02666] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/02/2023]
Abstract
The conductive hydrogel as a flexible sensor not only has certain mechanical flexibility but also can be used in the field of human health detection and human-computer interaction. Herein, by introduction of tannic acid (TA) with MXene into the polyacrylamide (PAM)/carboxymethyl chitosan (CMC) double-network hydrogel, a hydrogel with high stretchability, self-adhesion, and high sensitivity was prepared. CMC and PAM form a semi-interpenetrating double-network of high toughness and durability through electrostatic interactions and multiple hydrogen bonding networks. The abundant hydrophilic functional groups on TA and MXene form multiple hydrogen bonds simultaneously with the polymer network, ensuring high stretchability and sensitivity of the hydrogel. The hydrogel can display an accurate response to a variety of stimulus signals and can monitor both human joint movements and small physiological signal changes. It can also be combined with deep learning algorithms to classify handwritten digits with an accuracy rate of 98%. This work can promote the application of hydrogel sensors with durability and high sensitivity. The combination of algorithms and flexible sensors provides important ideas for the further development of flexible devices.
Collapse
Affiliation(s)
- Hao Zhang
- College of Control Science and Engineering, China University of Petroleum (East China), Qingdao 266580, China
| | - Dongzhi Zhang
- College of Control Science and Engineering, China University of Petroleum (East China), Qingdao 266580, China
| | - Huixin Luan
- College of Control Science and Engineering, China University of Petroleum (East China), Qingdao 266580, China
| | - Zihu Wang
- College of Control Science and Engineering, China University of Petroleum (East China), Qingdao 266580, China
| | - Pengfei Zhang
- College of Control Science and Engineering, China University of Petroleum (East China), Qingdao 266580, China
| | - Guangshuai Xi
- College of Control Science and Engineering, China University of Petroleum (East China), Qingdao 266580, China
| | - Xinyi Ji
- College of Control Science and Engineering, China University of Petroleum (East China), Qingdao 266580, China
| |
Collapse
|
8
|
Ding H, Liu J, Shen X, Li H. Advances in the Preparation of Tough Conductive Hydrogels for Flexible Sensors. Polymers (Basel) 2023; 15:4001. [PMID: 37836050 PMCID: PMC10575238 DOI: 10.3390/polym15194001] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2023] [Revised: 09/24/2023] [Accepted: 09/29/2023] [Indexed: 10/15/2023] Open
Abstract
The rapid development of tough conductive hydrogels has led to considerable progress in the fields of tissue engineering, soft robots, flexible electronics, etc. Compared to other kinds of traditional sensing materials, tough conductive hydrogels have advantages in flexibility, stretchability and biocompatibility due to their biological structures. Numerous hydrogel flexible sensors have been developed based on specific demands for practical applications. This review focuses on tough conductive hydrogels for flexible sensors. Representative tactics to construct tough hydrogels and strategies to fulfill conductivity, which are of significance to fabricating tough conductive hydrogels, are briefly reviewed. Then, diverse tough conductive hydrogels are presented and discussed. Additionally, recent advancements in flexible sensors assembled with different tough conductive hydrogels as well as various designed structures and their sensing performances are demonstrated in detail. Applications, including the wearable skins, bionic muscles and robotic systems of these hydrogel-based flexible sensors with resistive and capacitive modes are discussed. Some perspectives on tough conductive hydrogels for flexible sensors are also stated at the end. This review will provide a comprehensive understanding of tough conductive hydrogels and will offer clues to researchers who have interests in pursuing flexible sensors.
Collapse
Affiliation(s)
- Hongyao Ding
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China; (H.D.)
| | - Jie Liu
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China; (H.D.)
| | - Xiaodong Shen
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China; (H.D.)
| | - Hui Li
- Key Laboratory for Light-Weight Materials, Nanjing Tech University, Nanjing 210009, China
| |
Collapse
|
9
|
Xia H, Ma H, Sun D, Chen Z, Wang S, Li P, Huang J, Gui C. Fabrication of Textured Ni-Coated Carbon Tubes for a Flexible Strain Sensor: Effect of the Device Elastic Modulus on Sensor Performance. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2023. [PMID: 37368651 DOI: 10.1021/acs.langmuir.3c01168] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/29/2023]
Abstract
The exploration of flexible resistive sensors with excellent performance remains a challenge. In this paper, a nickel-coated carbon tube with a textured structure was prepared as a conductive sensitive material and inserted into the poly(dimethylsiloxane) (PDMS) polymer; interestingly, the sensor performance was controlled by the elastic modulus of the matrix resin. The results show that Pd2+ may be adsorbed by the active groups on the surface of a plant fiber as a catalytic center for the reduction of Ni2+. After 300 °C annealing, the inner plant fiber would be carbonized and attached to the outside of the nickel tube; to be precise, the textured Ni-encapsulated C tube was fabricated successfully. It is worth noting that the C tube serves as a layer of support for the external Ni coating, providing sufficient mechanical strength. In addition, resistance sensors with different properties were prepared by controlling the elasticity modulus of the PDMS polymer by introducing different contents of curing agents. The limit uniaxial tensile strain was enhanced from 42 to 49% and sensitivity reduced from 0.2 to 2.0% with the elasticity modulus of the matrix resin increasing from 0.32 to 2.2 MPa. As expected, the sensor is obviously appropriate for the detection of elbow joints, human speaking, and human joints with the reduction of the elasticity modulus of the matrix resin. To be precise, the optimal elastic modulus of the sensor matrix resin would facilitate the improvement of its sensitivity to monitor different human behaviors.
Collapse
Affiliation(s)
- Housheng Xia
- School of Biological and Chemical Engineering, Zhejiang University of Science and Technology, Hangzhou City 310023, China
| | - Haodong Ma
- School of Energy Materials and Chemical Engineering, Hefei University, Hefei City 230601, China
- Guangxi Key Laboratory of Calcium Carbonate Resources Comprehensive Utilization, College of Materials and Chemical Engineering, Hezhou University, Hezhou City 542899, China
| | - Di Sun
- School of Energy Materials and Chemical Engineering, Hefei University, Hefei City 230601, China
- Guangxi Key Laboratory of Calcium Carbonate Resources Comprehensive Utilization, College of Materials and Chemical Engineering, Hezhou University, Hezhou City 542899, China
| | - Zhenming Chen
- School of Energy Materials and Chemical Engineering, Hefei University, Hefei City 230601, China
- Guangxi Key Laboratory of Calcium Carbonate Resources Comprehensive Utilization, College of Materials and Chemical Engineering, Hezhou University, Hezhou City 542899, China
| | - Shufeng Wang
- School of Energy Materials and Chemical Engineering, Hefei University, Hefei City 230601, China
| | - Peng Li
- Guangxi Key Laboratory of Calcium Carbonate Resources Comprehensive Utilization, College of Materials and Chemical Engineering, Hezhou University, Hezhou City 542899, China
| | - Junjun Huang
- School of Energy Materials and Chemical Engineering, Hefei University, Hefei City 230601, China
- Guangxi Key Laboratory of Calcium Carbonate Resources Comprehensive Utilization, College of Materials and Chemical Engineering, Hezhou University, Hezhou City 542899, China
| | - Chengmei Gui
- School of Energy Materials and Chemical Engineering, Hefei University, Hefei City 230601, China
- School of Chemistry and Chemical Engineering, Chaohu University, Hefei City 230009, China
- Guangxi Key Laboratory of Calcium Carbonate Resources Comprehensive Utilization, College of Materials and Chemical Engineering, Hezhou University, Hezhou City 542899, China
| |
Collapse
|
10
|
Li X, Jiang L, Yan M, Bi H, Wang Q. Highly stretchable, tough and conductive chitin nanofiber composite hydrogel as a wearable sensor. Int J Biol Macromol 2023; 242:124780. [PMID: 37172700 DOI: 10.1016/j.ijbiomac.2023.124780] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/20/2023] [Revised: 04/21/2023] [Accepted: 05/04/2023] [Indexed: 05/15/2023]
Abstract
To meet the requirements of eco-friendly and sustainability in the 21st century, hydrogels based on biopolymer with conductivity and stretchable property have attained increasing attention for strain sensor. However, the as-prepared of hydrogel sensor with excellent mechanical property and high strain sensitivity is still a challenge. In this study, chitin nanofiber (ChNF) reinforced composite hydrogels of PACF are fabricated via a facile one-pot method. The obtained PACF composite hydrogel exhibits good transparency (80.6 % at 800 nm)and excellent mechanical properties (tensile strength, 261.2 kPa; tensile strain as high as 550.3 %). Moreover, the composite hydrogels also demonstrate excellent anti-compression performance. The composite hydrogels own good conductivity (1.20 S/m) and strain sensitivity. Most importantly, the hydrogel can be assembled as a strain/pressure sensor for detecting large-scale and small-scale human motion. Therefore, flexible conductive hydrogel strain sensors will have broad application prospects in artificial intelligence, electronic skin, and personal health.
Collapse
Affiliation(s)
- Xiaomeng Li
- School of Chemistry and Chemical Engineering, Anhui University, Hefei 230601, China
| | - Lei Jiang
- School of Chemistry and Chemical Engineering, Anhui University, Hefei 230601, China
| | - Manqing Yan
- School of Chemistry and Chemical Engineering, Anhui University, Hefei 230601, China
| | - Hong Bi
- School of Chemistry and Chemical Engineering, Anhui University, Hefei 230601, China
| | - Qiyang Wang
- School of Chemistry and Chemical Engineering, Anhui University, Hefei 230601, China.
| |
Collapse
|
11
|
Wu J, Liu Y, Hua S, Meng F, Ma Q, Song S, Che Y. Dynamic Cross-Linking Network Construction of Carboxymethyl Starch Enabling Temperature and Strain Bimodal Film Sensors. ACS APPLIED MATERIALS & INTERFACES 2023; 15:17293-17300. [PMID: 36951487 DOI: 10.1021/acsami.3c01918] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Building stimulus-responsive units in the hydrogel coatings remains challenging for film sensors consisting of alternated layers of inert substrates and hydrogel coatings. An interesting film sensor with a carboxymethyl starch-based hydrogel coating was developed here. The cross-linking networks of carboxymethyl starch play the roles of structure-constructing units and stimulus-controlling units simultaneously, endowing the coatings with thermal sensing and strain sensing capabilities. The dynamic cross-links formed via the boronic ester bonds are temperature-sensitive, releasing or consuming additional acid ions with temperature alteration, and also as primary networks give the hydrogel strength and stretchability with the assistance of semi-penetrated polyacrylamide chains. Therefore, as-prepared flexible film sensors can be used to detect the periodic changes of human temperature and small-scale motion with multiple working modes, discriminating the physical states related to human health. Moreover, this kind of starch-based coating is degradable in a strongly alkaline solution and the inert substrate layer can protect the skin from erosion caused by direct hydrogel-skin contact, and thereby the film sensor is human- and environmentally friendly. This work also proposes a strategy of building temperature-sensitive units in the film sensor via regulating the chemical networks, instead of tuning physical structures.
Collapse
Affiliation(s)
- Jianzhen Wu
- Marine College, Shandong University (Weihai), Wenhua West Road, Weihai, Shandong Province 264209, P. R. China
| | - Yijie Liu
- Marine College, Shandong University (Weihai), Wenhua West Road, Weihai, Shandong Province 264209, P. R. China
| | - Shengming Hua
- Marine College, Shandong University (Weihai), Wenhua West Road, Weihai, Shandong Province 264209, P. R. China
| | - Fanjun Meng
- Marine College, Shandong University (Weihai), Wenhua West Road, Weihai, Shandong Province 264209, P. R. China
| | - Qinglin Ma
- Marine College, Shandong University (Weihai), Wenhua West Road, Weihai, Shandong Province 264209, P. R. China
| | - Shuliang Song
- Marine College, Shandong University (Weihai), Wenhua West Road, Weihai, Shandong Province 264209, P. R. China
| | - Yuju Che
- Marine College, Shandong University (Weihai), Wenhua West Road, Weihai, Shandong Province 264209, P. R. China
| |
Collapse
|
12
|
Yan Y, Zhang C, Deng X, Zhang J, Xue Y, Zhang J, Luo Y, Yang F, Wang G, Wang R, Chen J. Designing Superhydrophilic Hydrogels as Binder-Free Catalysts for Enhanced Oxygen Evolution Performance. Ind Eng Chem Res 2023. [DOI: 10.1021/acs.iecr.3c00281] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/08/2023]
Affiliation(s)
- Yong Yan
- College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China
- Engineering Research Center of Alternative Energy Materials & Devices, Ministry of Education, Sichuan University, Chengdu 610065, China
| | - Chenyang Zhang
- College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China
| | - Xin Deng
- College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China
| | - Jin Zhang
- College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China
| | - Yali Xue
- College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China
| | - Jie Zhang
- College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China
| | - Yingjian Luo
- College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China
| | - Fuwen Yang
- College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China
| | - Gang Wang
- College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China
- Engineering Research Center of Alternative Energy Materials & Devices, Ministry of Education, Sichuan University, Chengdu 610065, China
| | - Ruilin Wang
- College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China
- Engineering Research Center of Alternative Energy Materials & Devices, Ministry of Education, Sichuan University, Chengdu 610065, China
| | - Jinwei Chen
- College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China
- Engineering Research Center of Alternative Energy Materials & Devices, Ministry of Education, Sichuan University, Chengdu 610065, China
| |
Collapse
|
13
|
Dual Network Hydrogel with High Mechanical Properties, Electrical Conductivity, Water Retention and Frost Resistance, Suitable for Wearable Strain Sensors. Gels 2023; 9:gels9030224. [PMID: 36975673 PMCID: PMC10048269 DOI: 10.3390/gels9030224] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/24/2023] [Revised: 03/10/2023] [Accepted: 03/12/2023] [Indexed: 03/17/2023] Open
Abstract
With the progress of science and technology, intelligent wearable devices have become more and more popular in our daily life. Hydrogels are widely used in flexible sensors due to their good tensile and electrical conductivity. However, traditional water-based hydrogels are limited by shortcomings of water retention and frost resistance if they are used as the application materials of flexible sensors. In this study, the composite hydrogels formed by polyacrylamide (PAM) and TEMPO-Oxidized Cellulose Nanofibers (TOCNs) are immersed in LiCl/CaCl2/GI solvent to form double network (DN) hydrogel with better mechanical properties. The method of solvent replacement give the hydrogel good water retention and frost resistance, and the weight retention rate of the hydrogel was 80.5% after 15 days. The organic hydrogels still have good electrical and mechanical properties after 10 months, and can work normally at −20 °C, and has excellent transparency. The organic hydrogel show satisfactory sensitivity to tensile deformation, which has great potential in the field of strain sensors.
Collapse
|
14
|
Network Structure and Viscoelastic Behavior of High-Strength Crystal Microphase Crosslinking Hydrogels Analyzed from Combined Model. J Mol Liq 2023. [DOI: 10.1016/j.molliq.2023.121411] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/11/2023]
|
15
|
Wang Y, Zhang W, Gong X, Zhao C, Liu Y, Zhang C. Construction of Carboxymethyl Chitosan Hydrogel with Multiple Cross-linking Networks for Electronic Devices at Low Temperature. ACS Biomater Sci Eng 2023; 9:508-519. [PMID: 36502379 DOI: 10.1021/acsbiomaterials.2c01243] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
On the basis of the original hydrogen bonding interaction and physical entanglement, covalent cross-linking and ionic cross-linking were additionally introduced to construct a carboxymethyl chitosan/allyl glycidyl ether conductive hydrogel (CCH) through a one pot method by a graft reaction, an addition reaction, and simple immersion, successively. The multiple cross-linking networks significantly increased the strength of CCHs and endowed them with ionic conductivity and an antifreezing property at -40 °C, which showed stable, durable, and reversible sensitivity to finger bending activity at subzero temperature. The CCHs could even be assembled into a triboelectric nanogenerator (TENG) to provide electric energy, which demonstrated stability against temperature variation, multiple drawing, long-term storage, or large quantities of contact-separation motion cycles. CCH-TENG can also be used as a tactile sensor within the pressure range from 0.4 kPa to higher than 8000 kPa. This work provided a simple route to fabricate antifreezing conductive hydrogels based on carboxymethyl chitosan and to find potential applications in soft sensor devices under a low temperature environment.
Collapse
Affiliation(s)
- Yang Wang
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, 483 Wushan Road, Guangzhou510642, China.,Guangdong Laboratory for Lingnan Modern Agriculture, 483 Wushan Road, Guangzhou510642, China
| | - Wenbo Zhang
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, 483 Wushan Road, Guangzhou510642, China.,Guangdong Laboratory for Lingnan Modern Agriculture, 483 Wushan Road, Guangzhou510642, China
| | - Xinhu Gong
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, 483 Wushan Road, Guangzhou510642, China.,Guangdong Laboratory for Lingnan Modern Agriculture, 483 Wushan Road, Guangzhou510642, China
| | - Caimei Zhao
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, 483 Wushan Road, Guangzhou510642, China.,Guangdong Laboratory for Lingnan Modern Agriculture, 483 Wushan Road, Guangzhou510642, China
| | - Yiying Liu
- School of Health and Medicine, 1 Huashang Road, Guangzhou Huashang Vocational College, Guangzhou511300, China
| | - Chaoqun Zhang
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, 483 Wushan Road, Guangzhou510642, China.,Guangdong Laboratory for Lingnan Modern Agriculture, 483 Wushan Road, Guangzhou510642, China
| |
Collapse
|
16
|
Gao M, Zhao R, Kang B, Zhao Z, Song S. High-performance ionic conductive double-network hydrogel enabling a long-term flexible strain sensor. Colloids Surf A Physicochem Eng Asp 2023. [DOI: 10.1016/j.colsurfa.2023.131051] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/29/2023]
|
17
|
Zeng LY, Wang XC, Wen Y, Chen HM, Ni HL, Yu WH, Bai YF, Zhao KQ, Hu P. Anti-freezing dual-network hydrogels with high-strength, self-adhesive and strain-sensitive for flexible sensors. Carbohydr Polym 2023; 300:120229. [DOI: 10.1016/j.carbpol.2022.120229] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/03/2022] [Revised: 09/19/2022] [Accepted: 10/11/2022] [Indexed: 11/11/2022]
|
18
|
Construction and characterization of highly stretchable ionic conductive hydrogels for flexible sensors with good anti-freezing performance. Eur Polym J 2023. [DOI: 10.1016/j.eurpolymj.2023.111827] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/10/2023]
|
19
|
Xiong J, Zhan T, Hu Y, Guo Z, Wang S. A tough, stretchable, freeze-tolerated double-cross-linked conductive hydrogel and its application in flexible strain sensors. Colloid Polym Sci 2022. [DOI: 10.1007/s00396-022-05045-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
|
20
|
Meng H, Ye W, Wang C, Gao Z, Hu B, Wang C. Crystalline micro-nanoparticles enhance cross-linked hydrogels via a confined assembly of chitosan and γ-cyclodextrin. Carbohydr Polym 2022; 298:120145. [DOI: 10.1016/j.carbpol.2022.120145] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/19/2022] [Revised: 09/01/2022] [Accepted: 09/20/2022] [Indexed: 11/02/2022]
|
21
|
Li B, Hao W, Wang P, Zhou M, Liu J, Hu Z, Ma M. Preparation and properties of CS/P(AM- co-AA) composite hydrogels by frontal polymerization of ternary DES. RSC Adv 2022; 12:34724-34729. [PMID: 36545602 PMCID: PMC9717417 DOI: 10.1039/d2ra06232a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/04/2022] [Accepted: 11/23/2022] [Indexed: 12/03/2022] Open
Abstract
A deep eutectic solvent (DES) was prepared from choline chloride (ChCl), acrylamide (AM) and acrylic acid (AA); chitosan (CS) was used as a filler, and CS/P(AM-co-AA) composite hydrogels were prepared by frontal polymerization (FP). The hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The mechanical properties, pH responsiveness and conductivity of the hydrogel were studied. The results showed that the mechanical properties of the hydrogel were significantly improved by adding CS, and the tensile strength and compressive strength were increased by 11.61 and 1.65 times respectively due to the increase in number of hydrogen bonds. At the same time, due to the presence of AA, the composite hydrogel has excellent pH response and super high swelling performance under alkaline conditions. The introduction of CS enhanced the conductivity of the hydrogel and gradually increased with the increase of CS content. The conductivity of the hydrogel with CS content of 10 wt% was nearly 160 times that of the hydrogel without CS. In this study, a more convenient and rapid method was proposed to prepare conductive composite hydrogels with excellent mechanical properties and pH responsiveness.
Collapse
Affiliation(s)
- Bin Li
- School of Mechanical Engineering, Wuhan Polytechnic UniversityWuhanHubei 430023China
| | - Wenrui Hao
- School of Mechanical Engineering, Wuhan Polytechnic UniversityWuhanHubei 430023China
| | - Peng Wang
- Wuhan Second Ship Design and Research InstituteWuhan430205China
| | - Mengjing Zhou
- School of Mechanical Engineering, Wuhan Polytechnic UniversityWuhanHubei 430023China
| | - Jizhen Liu
- Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics, Wuhan University of TechnologyWuhanHubei 430070China
| | - Zhigang Hu
- School of Mechanical Engineering, Wuhan Polytechnic UniversityWuhanHubei 430023China
| | - Ming Ma
- School of Mechanical Engineering, Wuhan Polytechnic UniversityWuhanHubei 430023China
| |
Collapse
|
22
|
Zhang H, Shen H, Lan J, Wu H, Wang L, Zhou J. Dual-network polyacrylamide/carboxymethyl chitosan-grafted-polyaniline conductive hydrogels for wearable strain sensors. Carbohydr Polym 2022; 295:119848. [DOI: 10.1016/j.carbpol.2022.119848] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2022] [Revised: 07/04/2022] [Accepted: 07/05/2022] [Indexed: 01/13/2023]
|
23
|
Li W, Tao LQ, Kang MC, Li CH, Luo CY, He G, Sang TY, Wang P. Tunable mechanical, self-healing hydrogels driven by sodium alginate and modified carbon nanotubes for health monitoring. Carbohydr Polym 2022; 295:119854. [DOI: 10.1016/j.carbpol.2022.119854] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/13/2022] [Revised: 06/22/2022] [Accepted: 07/06/2022] [Indexed: 12/29/2022]
|
24
|
Sun Z, Hu Y, Wei C, Hao R, Hao C, Liu W, Liu H, Huang M, He S, Yang M. Transparent, photothermal and stretchable alginate-based hydrogels for remote actuation and human motion sensing. Carbohydr Polym 2022; 293:119727. [DOI: 10.1016/j.carbpol.2022.119727] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/16/2021] [Revised: 06/08/2022] [Accepted: 06/08/2022] [Indexed: 11/29/2022]
|
25
|
Cavallaro G, Caruso MR, Milioto S, Fakhrullin R, Lazzara G. Keratin/alginate hybrid hydrogels filled with halloysite clay nanotubes for protective treatment of human hair. Int J Biol Macromol 2022; 222:228-238. [PMID: 36155783 DOI: 10.1016/j.ijbiomac.2022.09.170] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/07/2022] [Revised: 09/02/2022] [Accepted: 09/19/2022] [Indexed: 11/19/2022]
Abstract
Keratin/alginate hydrogels filled with halloysite nanotubes (HNTs) have been tested for the protective coating of human hair. Preliminary studies have been conducted on the aqueous colloidal systems and the corresponding hydrogels obtained by using Ca2+ ions as crosslinkers. Firstly, we have investigated the colloidal properties of keratin/alginate/HNTs dispersions to explore the specific interactions occurring between the biomacromolecules and the nanotubes. Then, the rheological properties of the hydrogels have been studied highlighting that the keratin/alginate interactions and the subsequent addition of HNTs facilitate the biopolymer crosslinking. Finally, human hair samples have been treated with the hydrogel systems by the dipping procedure. The protection efficiency of the hydrogels has been evaluated by studying the tensile properties of hair fibers exposed to UV irradiation. In conclusion, keratin/alginate hydrogel filled with halloysite represents a promising formulation for hair protective treatments due to the peculiar structural and rheological characteristics.
Collapse
Affiliation(s)
- Giuseppe Cavallaro
- Dipartimento di Fisica e Chimica, Università degli Studi di Palermo, Viale delle Scienze, pad. 17, 90128 Palermo, Italy; Consorzio Interuniversitario Nazionale per la Scienza e Tecnologia dei Materiali, INSTM, Via G. Giusti, 9, I-50121 Firenze, Italy.
| | - Maria Rita Caruso
- Dipartimento di Fisica e Chimica, Università degli Studi di Palermo, Viale delle Scienze, pad. 17, 90128 Palermo, Italy
| | - Stefana Milioto
- Dipartimento di Fisica e Chimica, Università degli Studi di Palermo, Viale delle Scienze, pad. 17, 90128 Palermo, Italy; Consorzio Interuniversitario Nazionale per la Scienza e Tecnologia dei Materiali, INSTM, Via G. Giusti, 9, I-50121 Firenze, Italy
| | - Rawil Fakhrullin
- Institute of Fundamental Medicine and Biology, Kazan Federal University, Kreml uramı 18, Kazan, Republic of Tatarstan, 420008, Russian Federation
| | - Giuseppe Lazzara
- Dipartimento di Fisica e Chimica, Università degli Studi di Palermo, Viale delle Scienze, pad. 17, 90128 Palermo, Italy; Consorzio Interuniversitario Nazionale per la Scienza e Tecnologia dei Materiali, INSTM, Via G. Giusti, 9, I-50121 Firenze, Italy
| |
Collapse
|
26
|
From carbon nanotubes to ultra-sensitive, extremely-stretchable and self-healable hydrogels. Eur Polym J 2022. [DOI: 10.1016/j.eurpolymj.2022.111485] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
27
|
Flexible self-powered integrated sensing system based on a rechargeable zinc-ion battery by using a multifunctional polyacrylamide/carboxymethyl chitosan/LiCl ionic hydrogel. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.129254] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
28
|
Song X, Lu G, Wang J, Zheng J, Sui S, Li Q, Zhang Y. Molecular Dynamics-Assisted Design of High Temperature-Resistant Polyacrylamide/Poloxamer Interpenetrating Network Hydrogels. MOLECULES (BASEL, SWITZERLAND) 2022; 27:molecules27165326. [PMID: 36014564 PMCID: PMC9414860 DOI: 10.3390/molecules27165326] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/15/2022] [Revised: 08/13/2022] [Accepted: 08/18/2022] [Indexed: 11/16/2022]
Abstract
Polyacrylamide has promising applications in a wide variety of fields. However, conventional polyacrylamide is prone to hydrolysis and thermal degradation under high temperature conditions, resulting in a decrease in solution viscosity with increasing temperature, which limits its practical effect. Herein, combining molecular dynamics and practical experiments, we explored a facile and fast mixing strategy to enhance the thermal stability of polyacrylamide by adding common poloxamers to form the interpenetrating network hydrogel. The blending model of three synthetic polyacrylamides (cationic, anionic, and nonionic) and poloxamers was first established, and then the interaction process between them was simulated by all-atom molecular dynamics. In the results, it was found that the hydrogen bonding between the amide groups on all polymers and the oxygen-containing groups (ether and hydroxyl groups) on poloxamers is very strong, which may be the key to improve the high temperature resistance of the hydrogel. Subsequent rheological tests also showed that poloxamers can indeed significantly improve the stability and viscosity of nonionic polyacrylamide containing only amide groups at high temperatures and can maintain a high viscosity of 3550 mPa·S at 80 °C. Transmission electron microscopy further showed that the nonionic polyacrylamide/poloxamer mixture further formed an interpenetrating network structure. In addition, the Fourier transform infrared test also proved the existence of strong hydrogen bonding between the two polymers. This work provides a useful idea for improving the properties of polyacrylamide, especially for the design of high temperature materials for physical blending.
Collapse
Affiliation(s)
- Xianwen Song
- State Key Laboratory of Shale Oil and Gas Enrichment Mechanism and Effective Development, Beijing 100083, China
- Research and Development Center for the Sustainable Development of Continental Sandstone Mature Oilfield by National Energy Administration, Beijing 100083, China
- Hunan Provincial Key Laboratory of Micro & Nano Materials Interface Science, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
| | - Gang Lu
- Research and Development Center for the Sustainable Development of Continental Sandstone Mature Oilfield by National Energy Administration, Beijing 100083, China
| | - Jingxing Wang
- Hunan Provincial Key Laboratory of Micro & Nano Materials Interface Science, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
| | - Jun Zheng
- Hunan Provincial Key Laboratory of Micro & Nano Materials Interface Science, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
| | - Shanying Sui
- Hunan Provincial Key Laboratory of Micro & Nano Materials Interface Science, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
| | - Qiang Li
- Hunan Provincial Key Laboratory of Micro & Nano Materials Interface Science, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
| | - Yi Zhang
- Hunan Provincial Key Laboratory of Micro & Nano Materials Interface Science, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
- Correspondence:
| |
Collapse
|
29
|
Gong X, Zhao C, Wang Y, Luo Y, Zhang C. Antifreezing, Ionically Conductive, Transparent, and Antidrying Carboxymethyl Chitosan Self-Healing Hydrogels as Multifunctional Sensors. ACS Biomater Sci Eng 2022; 8:3633-3643. [PMID: 35876253 DOI: 10.1021/acsbiomaterials.2c00496] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Through a simple strategy of immersion in a mixed solution of water/ethylene glycol (EG)/lithium chloride (LiCl), self-healing carboxymethyl chitosan (CA) hydrogels, that is, CA/N-vinylpyrrolidone-EG-Li+ hydrogels (CEH) with an ultra-low-temperature freezing resistance below -70 °C were fabricated. The introduction of electrolyte ions and small-molecule polyol also made these hydrogels highly conductive (0.8 S m-1) and imparted antidrying property to them, showing stable and reversible sensitivity to finger-wrist bending as well as 150 cycles of stretching. Such hydrogels also presented highly efficient self-healing ability, with a stress-strain healing efficiency of over 90%. Furthermore, the CEH-based sensors maintained a stable sensing performance over a wide range of temperatures below the freezing point (from -10 to -70 °C) and exhibited stable sensitivity to temperatures with fast response and no significant hysteresis. The present work is expected to provide a simple and sustainable route for the preparation of multifunctional antifreezing conductive hydrogels based on CA, leading to a wide range of potential applications in soft sensor devices.
Collapse
Affiliation(s)
- Xinhu Gong
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, 483 Wushan Road, Guangzhou 510642, China.,Guangdong Laboratory for Lingnan Modern Agriculture, 483 Wushan Road, Guangzhou 510642, China
| | - Caimei Zhao
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, 483 Wushan Road, Guangzhou 510642, China.,Guangdong Laboratory for Lingnan Modern Agriculture, 483 Wushan Road, Guangzhou 510642, China
| | - Yang Wang
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, 483 Wushan Road, Guangzhou 510642, China.,Guangdong Laboratory for Lingnan Modern Agriculture, 483 Wushan Road, Guangzhou 510642, China
| | - Ying Luo
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, 483 Wushan Road, Guangzhou 510642, China.,Guangdong Laboratory for Lingnan Modern Agriculture, 483 Wushan Road, Guangzhou 510642, China
| | - Chaoqun Zhang
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, 483 Wushan Road, Guangzhou 510642, China.,Guangdong Laboratory for Lingnan Modern Agriculture, 483 Wushan Road, Guangzhou 510642, China
| |
Collapse
|
30
|
Hegde VH, Doherty MF, Squires TM. A two-phase model that unifies and extends the classical models of membrane transport. Science 2022; 377:186-191. [DOI: 10.1126/science.abm7192] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
Two models describe solvent transport through swollen, nonporous membranes. The pore-flow model, based on fluid mechanics, works for porous membranes, whereas the solution-diffusion model invokes molecular diffusion to treat nonporous membranes. Both approaches make valid arguments for swollen polymer membranes, but they disagree in their predictions of intramembrane pressure and concentration profiles. Using a fluid-solid model that treats the solvent and membrane matrix as separate phases, we show both classical models to be valid, to represent complementary approaches to the same phenomenon, and to make identical predictions. The fluid-solid model clarifies recent reverse osmosis measurements; provides a predictive and mechanistic basis for empirical high-pressure limiting flux phenomena, in quantitative agreement with classic measurements; and gives a framework to treat nonporous but mechanically heterogeneous membrane materials.
Collapse
Affiliation(s)
- Varun H. Hegde
- Department of Chemical Engineering, University of California, Santa Barbara, CA, USA
| | - Michael F. Doherty
- Department of Chemical Engineering, University of California, Santa Barbara, CA, USA
| | - Todd M. Squires
- Department of Chemical Engineering, University of California, Santa Barbara, CA, USA
| |
Collapse
|
31
|
Li B, Xu X, Hu Z, Li Y, Zhou M, Liu J, Jiang Y, Wang P. Rapid preparation of N-CNTs/P(AA- co-AM) composite hydrogel via frontal polymerization and its mechanical and conductive properties. RSC Adv 2022; 12:19022-19028. [PMID: 35865608 PMCID: PMC9241152 DOI: 10.1039/d2ra02003c] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/28/2022] [Accepted: 05/16/2022] [Indexed: 11/21/2022] Open
Abstract
Deep eutectic solvent (DES) was prepared by using acrylic acid (AA) and acrylamide (AM) as hydrogen bonding donors (HBD) and choline chloride (ChCl) as hydrogen bonding receptors (HBA). Nitrogen-doped carbon nanotubes (N-CNTs) were dispersed in DES as fillers, and N-CNTs/P(AA-co-AM) composite hydrogels were prepared by FP. The interaction mode between the hydrogel and N-CNTs was characterized by Fourier infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The mechanical properties, pH response and electrical conductivity of the composite hydrogels were studied. The results showed that the mechanical properties of the hydrogel were significantly enhanced with the increase of N-CNT content. The tensile strength and compressive strength of the FP4 composite hydrogel reached 5.42 MPa and 4.29 MPa, respectively. Due to the dissociation of carboxyl groups in AA in an alkaline environment the composite hydrogel showed excellent pH response performance. The conductivity of the hydrogel was also found to be improved with the content of N-CNTs. When the content of N-CNTs is 1.0 wt%, the conductivity of the hydrogel was 4.2 times higher than that of the hydrogel without N-CNTs, and connecting it to a circuit can make an LED lamp emit bright light. In this study, a simple and green method was proposed to prepare composite hydrogels with excellent mechanical properties and electrical conductivity by FP of DES in less than 5 min. This study provides a rapid and low-energy method for the preparation of nanocomposite hydrogels with excellent mechanical properties and electrical conductivity.![]()
Collapse
Affiliation(s)
- Bin Li
- School of Mechanical Engineering, Wuhan Polytechnic University Wuhan Hubei 430023 China
| | - Xiaojia Xu
- School of Mechanical Engineering, Wuhan Polytechnic University Wuhan Hubei 430023 China
| | - Zhigang Hu
- School of Mechanical Engineering, Wuhan Polytechnic University Wuhan Hubei 430023 China
| | - Yongjing Li
- Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics, Wuhan University of Technology Wuhan Hubei 430070 China
| | - Mengjing Zhou
- School of Mechanical Engineering, Wuhan Polytechnic University Wuhan Hubei 430023 China
| | - Jizhen Liu
- School of Mechanical Engineering, Wuhan Polytechnic University Wuhan Hubei 430023 China
| | - Yajun Jiang
- School of Mechanical Engineering, Wuhan Polytechnic University Wuhan Hubei 430023 China
| | - Peng Wang
- Wuhan Second Ship Design and Research Institute Wuhan 430205 China
| |
Collapse
|
32
|
Zaidi SFA, Kim YA, Saeed A, Sarwar N, Lee NE, Yoon DH, Lim B, Lee JH. Tannic acid modified antifreezing gelatin organohydrogel for low modulus, high toughness, and sensitive flexible strain sensor. Int J Biol Macromol 2022; 209:1665-1675. [PMID: 35487373 DOI: 10.1016/j.ijbiomac.2022.04.099] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/03/2022] [Revised: 03/26/2022] [Accepted: 04/14/2022] [Indexed: 12/17/2022]
Abstract
Current hydrogel strain sensors have met assorted essential requirements of wearing comfort, mechanical toughness, and strain sensitivity. However, an increment in the toughness of a hydrogel usually leads to an increase in elastic moduli that could be unfavorable for wearing comfort. In addition, traits of biofriendly and sustainability require synthesis of the hydrogels from natural polymer-based networks. We propose a novel strategy to fabricate an ionic conductive organohydrogel from natural biological macromolecule "gelatin" and polyacid "tannic acid" to resolve these challenges. Tannic acid modified the structure of the gelatin network in the ionic conductive organohydrogels, that not only led to an increase in toughness accompanying a decrease in elastic moduli but also headed to higher strain sensitivity and tunability. The proposed methodology exhibited tunable tensile modulus from 27 to 13 kPa, tensile strength from 287 to 325 kPa, elongation at fracture from 510 to 620%, toughness from 500 to 550 kJ/m3, conductivity from 0.29 to 0.8 S/m, and strain sensitivity (GF = 1.4-6.5). Moreover, the proposed organohydrogel exhibited excellent freezing tolerance. This study provides a facile yet powerful strategy to tune the mechanical and electrical properties of organohydrogels which can be adapted to various wearable sensors.
Collapse
Affiliation(s)
- Syed Farrukh Alam Zaidi
- School of Advanced Materials Science and Engineering, Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea; Department of Metallurgical and Materials Engineering, University of Engineering and Technology, Lahore 39161, Pakistan
| | - Yun Ah Kim
- School of Advanced Materials Science and Engineering, Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea
| | - Aiman Saeed
- Department of Biomedical Engineering, Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea
| | - Nasir Sarwar
- School of Advanced Materials Science and Engineering, Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea; Department of Textile Engineering, University of Engineering and Technology, Lahore (Faisalabad Campus) 38000, Pakistan
| | - Nae-Eung Lee
- School of Advanced Materials Science and Engineering, Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea; SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea; Biomedical Institute for Convergence at SKKU (BICS), Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea; Research Center for Advanced Materials Technology, Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea
| | - Dae Ho Yoon
- School of Advanced Materials Science and Engineering, Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea; SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea
| | - Byungkwon Lim
- School of Advanced Materials Science and Engineering, Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea.
| | - Jung Heon Lee
- School of Advanced Materials Science and Engineering, Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea; SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea; Biomedical Institute for Convergence at SKKU (BICS), Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea; Research Center for Advanced Materials Technology, Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea.
| |
Collapse
|
33
|
Wang R, Chi W, Wan F, Wei J, Ping H, Zou Z, Xie J, Wang W, Fu Z. Nanocage Ferritin Reinforced Polyacrylamide Hydrogel for Wearable Flexible Strain Sensors. ACS APPLIED MATERIALS & INTERFACES 2022; 14:21278-21286. [PMID: 35471924 DOI: 10.1021/acsami.2c00317] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Biocomposite hydrogels are promising for applications in wearable flexible strain sensors. Nevertheless, the existing biocomposite hydrogels are still hard to meet all requirements, which limits the practical application. Here, inspired by the structure and composition of natural ferritin, we design a PAAm-Ferritin hybrid hydrogel through a facile method. Ferritin is uniformly distributed in the cross-linking networks and acts as a nanocage spring model, leading to the enhanced tensile strength of the hydrogel. The fracture stress is 99 kPa at 1400% maximum elongation. As fabricated PAAm-Ferritin hybrid hydrogels exhibit high toughness and low elastic modulus (21 kPa). The PAAm-Ferritin hybrid hydrogels present excellent biocompatibility and increased conductivity compared with PAAm hydrogel. Impressively, as a wearable flexible strain sensor, the PAAm-Ferritin hybrid hydrogels have high sensitivity (gauge factor = 2.06), excellent reliability, and cycling stability. This study indicates the feasibility of utilizing ferritin to synthesize functional materials, which is conducive to expanding the use of protein synthesis of materials technology and application fields.
Collapse
Affiliation(s)
- Rongjie Wang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, P.R. China
| | - Wenhao Chi
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, P.R. China
| | - Fuqiang Wan
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, P.R. China
| | - Jingjiang Wei
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, P.R. China
| | - Hang Ping
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, P.R. China
| | - Zhaoyong Zou
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, P.R. China
| | - Jingjing Xie
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, P.R. China
| | - Weimin Wang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, P.R. China
| | - Zhengyi Fu
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, P.R. China
| |
Collapse
|
34
|
YU G, Dan N, Dan W, Chen Y. Wearable Tissue Adhesive Ternary Hydrogel of N-(2-Hydroxyl) Propyl-3-trimethyl Ammonium Chitosan, Tannic Acid, and Polyacrylamide. Ind Eng Chem Res 2022. [DOI: 10.1021/acs.iecr.2c00055] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Affiliation(s)
- Guofei YU
- National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu, Sichuan 610065, China
- Research Center of Biomedical Engineering, Sichuan University, Chengdu, Sichuan 610065, China
| | - Nianhua Dan
- National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu, Sichuan 610065, China
- Research Center of Biomedical Engineering, Sichuan University, Chengdu, Sichuan 610065, China
| | - Weihua Dan
- National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu, Sichuan 610065, China
- Research Center of Biomedical Engineering, Sichuan University, Chengdu, Sichuan 610065, China
| | - Yining Chen
- National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu, Sichuan 610065, China
- Research Center of Biomedical Engineering, Sichuan University, Chengdu, Sichuan 610065, China
| |
Collapse
|
35
|
Li B, Zhou M, Cheng M, Liu J, Xu X, Xie X. Rapid preparation of ZnO nanocomposite hydrogels by frontal polymerization of a ternary DES and performance study. RSC Adv 2022; 12:12871-12877. [PMID: 35496327 PMCID: PMC9048588 DOI: 10.1039/d2ra01626e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/12/2022] [Accepted: 04/17/2022] [Indexed: 11/21/2022] Open
Abstract
A deep eutectic solvent (DES) was synthesized from urea (U), acrylamide (AM), and choline chloride (ChCl). ZnO was dispersed in the DES as a filler, and nanocomposite hydrogels (ZnO/P(U-AM-ChCl)) were successfully prepared by frontal polymerization (FP). The hydrogels were verified by Fourier infrared spectroscopy to contain ZnO nanoparticles (ZnO-NPs). The swelling behaviour, conductivity, and antibacterial properties of the ZnO nanocomposite hydrogels were investigated. The results showed that the ZnO/P(U-AM-ChCl) hydrogels had excellent antibacterial properties and exhibited super high inhibition rates of 81.87% and 88.42% against two basic colonies of Gram-negative and Gram-positive bacteria, respectively. The equilibrium swelling of the hydrogels was found to increase significantly from 9.30 to 12.29 with the addition of ZnO, while the ZnO/P(U-AM-ChCl) hydrogel conductivity exhibited good UV sensitivity. This study provides a rapid and low-energy method for the preparation of nanocomposite hydrogels with excellent antibacterial properties.
Collapse
Affiliation(s)
- Bin Li
- School of Mechanical Engineering, Wuhan Polytechnic University Wuhan Hubei 430023 China
| | - Mengjing Zhou
- School of Mechanical Engineering, Wuhan Polytechnic University Wuhan Hubei 430023 China
| | - Ming Cheng
- School of Mechanical Engineering, Wuhan Polytechnic University Wuhan Hubei 430023 China
| | - Jizhen Liu
- School of Mechanical Engineering, Wuhan Polytechnic University Wuhan Hubei 430023 China
| | - Xiaojia Xu
- School of Mechanical Engineering, Wuhan Polytechnic University Wuhan Hubei 430023 China
| | - Xiangyu Xie
- Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics, Wuhan University of Technology Wuhan Hubei 430070 China
| |
Collapse
|
36
|
Fang T, Zhu J, Xu S, Jia L, Ma Y. Highly stretchable, self-healing and conductive silk fibroin-based double network gels via a sonication-induced and self-emulsifying green procedure. RSC Adv 2022; 12:11574-11582. [PMID: 35432940 PMCID: PMC9007228 DOI: 10.1039/d2ra00954d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/13/2022] [Accepted: 04/07/2022] [Indexed: 11/23/2022] Open
Abstract
Regenerated silk fibroin (RSF)-based hydrogels are promising biomedical materials due to their biocompatibility and biodegradability. However, the weak mechanical properties and lack of functionality limit their practical applications. Here, we developed a tough and conductive RSF-based double network (DN) gel, consisting of a sonication-induced β-sheet physically crosslinked RSF/S gel as the first network and a hydrophobically associated polyacrylamide/stearyl methacrylate (PAAm/C18) gel as the second network. In particular, the cross-linking points of the second network were micelles formed by emulsifying the hydrophobic monomer (C18M) with a natural SF- capryl glucoside co-surfactant. The reversible dynamic bonds in the DN provided good self-healing ability and an effective dissipative energy mechanism for the DN hydrogel, while the addition of calcium ions improved the self-healing ability and electrical conductivity of the hydrogel. Under optimal conditions, the RSF/S-PAAm/C18 DN gels exhibited large extensibility (1400%), high tensile strength (0.3 MPa), satisfactory self-healing capability (90%) and electrical conductivity (0.12 S·m-1). The full physically interacted DN hydrogels are expected to be applied in various fields such as tissue engineering, biosensors and artificial electronic skin.
Collapse
Affiliation(s)
- Tao Fang
- College of Materials Science and Engineering, Taiyuan University of Technology Taiyuan 030024 China
| | - Jingxin Zhu
- College of Materials Science and Engineering, Taiyuan University of Technology Taiyuan 030024 China
| | - Shuai Xu
- College of Materials Science and Engineering, Taiyuan University of Technology Taiyuan 030024 China
| | - Lan Jia
- College of Materials Science and Engineering, Taiyuan University of Technology Taiyuan 030024 China
| | - Yanlong Ma
- College of Materials Science and Engineering, Taiyuan University of Technology Taiyuan 030024 China
| |
Collapse
|
37
|
Liu Y, Wei H, Li S, Wang G, Guo T, Han H. Facile fabrication of semi-IPN hydrogel adsorbent based on quaternary cellulose via amino-anhydride click reaction in water. Int J Biol Macromol 2022; 207:622-634. [PMID: 35283138 DOI: 10.1016/j.ijbiomac.2022.03.032] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/26/2021] [Revised: 02/16/2022] [Accepted: 03/07/2022] [Indexed: 12/15/2022]
Abstract
Clean and safe water resources play a key role in environmental safety and human health. Recently, hydrogels have attracted extensive attention due to their non-toxicity, controllable performance, and high adsorption. Herein, a semi- interpenetrating network hydrogel (semi-IPN-Gel) adsorbent based on quaternary cellulose (QC) was prepared by the amino-anhydride click reaction between maleic anhydride copolymer and polyacrylamine hydrochloride (PAH), and its adsorption properties for Eosin Y were studied. First, a binary copolymer (PAM) of acrylamide and maleic anhydride was synthesized by free radical polymerization. Then, the PAM, QC and PAH were dissolved in water, and the pH of the solution was adjusted to alkaline. Semi-IPN-Gel was successfully prepared by fast anhydride-amino click reaction. The preparation conditions of hydrogels were optimized by single-factor experiments. Finally, taking Eosin Y as a model pollutant, the adsorption performance of Eosin Y was studied. The factors influencing the adsorption capacity of the absorbents such as initial concentration of the Eosin Y, temperature, the amount of absorbent, ionic strength and pH of the Eosin Y solutions were investigated. And adsorption data were analyzed via the kinetic model and the isothermal model, indicating that the adsorption process of the hydrogel is a single layer chemisorption process.
Collapse
Affiliation(s)
- Yuhua Liu
- School of Chemistry and Chemical Engineering, Henan University of Technology, Zhengzhou 450001, PR China
| | - Hongliang Wei
- School of Chemistry and Chemical Engineering, Henan University of Technology, Zhengzhou 450001, PR China.
| | - Songmao Li
- School of Chemistry and Chemical Engineering, Henan University of Technology, Zhengzhou 450001, PR China
| | - Gang Wang
- School of Chemistry and Chemical Engineering, Henan University of Technology, Zhengzhou 450001, PR China
| | - Tao Guo
- School of Chemistry and Chemical Engineering, Henan University of Technology, Zhengzhou 450001, PR China
| | - Huayun Han
- Center of Advanced Analysis and Gene Sequencing, Zhengzhou University, Zhengzhou 450001, PR China.
| |
Collapse
|
38
|
Synthesis and characterization of semi-interpenetrating polymer network hydrogel based on polyacrylic acid/polyallylamine and its application in wastewater remediation. Polym Bull (Berl) 2022. [DOI: 10.1007/s00289-022-04162-w] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
|
39
|
Li G, Li C, Li G, Yu D, Song Z, Wang H, Liu X, Liu H, Liu W. Development of Conductive Hydrogels for Fabricating Flexible Strain Sensors. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2101518. [PMID: 34658130 DOI: 10.1002/smll.202101518] [Citation(s) in RCA: 101] [Impact Index Per Article: 50.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/15/2021] [Revised: 08/07/2021] [Indexed: 06/13/2023]
Abstract
Conductive hydrogels can be prepared by incorporating various conductive materials into polymeric network hydrogels. In recent years, conductive hydrogels have been developed and applied in the field of strain sensors owing to their unique properties, such as electrical conductivity, mechanical properties, self-healing, and anti-freezing properties. These remarkable properties allow conductive hydrogel-based strain sensors to show excellent performance for identifying external stimuli and detecting human body movement, even at subzero temperatures. This review summarizes the properties of conductive hydrogels and their application in the fabrication of strain sensors working in different modes. Finally, a brief prospectus for the development of conductive hydrogels in the future is provided.
Collapse
Affiliation(s)
- Gang Li
- State Key Laboratory of Biobased Materials and Green Papermaking, Qilu University of Technology, Shandong Academy of Science, Jinan, Shandong, 250353, China
| | - Chenglong Li
- State Key Laboratory of Biobased Materials and Green Papermaking, Qilu University of Technology, Shandong Academy of Science, Jinan, Shandong, 250353, China
| | - Guodong Li
- State Key Laboratory of Biobased Materials and Green Papermaking, Qilu University of Technology, Shandong Academy of Science, Jinan, Shandong, 250353, China
| | - Dehai Yu
- State Key Laboratory of Biobased Materials and Green Papermaking, Qilu University of Technology, Shandong Academy of Science, Jinan, Shandong, 250353, China
| | - Zhaoping Song
- State Key Laboratory of Biobased Materials and Green Papermaking, Qilu University of Technology, Shandong Academy of Science, Jinan, Shandong, 250353, China
| | - Huili Wang
- State Key Laboratory of Biobased Materials and Green Papermaking, Qilu University of Technology, Shandong Academy of Science, Jinan, Shandong, 250353, China
| | - Xiaona Liu
- State Key Laboratory of Biobased Materials and Green Papermaking, Qilu University of Technology, Shandong Academy of Science, Jinan, Shandong, 250353, China
| | - Hong Liu
- Institute for Advanced Interdisciplinary Research, University of Jinan (iAIR), Jinan, 250022, China
- State Key Laboratory of Crystal Materials, Shandong University, Jinan, 250100, P. R. China
| | - Wenxia Liu
- State Key Laboratory of Biobased Materials and Green Papermaking, Qilu University of Technology, Shandong Academy of Science, Jinan, Shandong, 250353, China
| |
Collapse
|
40
|
Wang Y, Chen G, Yang F, Luo Z, Yuan B, Chen X, Wang L. Serendipity discovery of fire early warning function of chitosan film. Carbohydr Polym 2022; 277:118884. [PMID: 34893287 DOI: 10.1016/j.carbpol.2021.118884] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/21/2021] [Revised: 10/04/2021] [Accepted: 11/09/2021] [Indexed: 12/21/2022]
Abstract
Transparent chitosan (CS) film is prepared and its application in high temperature/fire warning is discussed. NaCl-doped chitosan (CS-NaCl) film shows excellent performance in real-time temperature monitoring and fire warning. The temperature warning of CS-NaCl film can be triggered under approximately 50 °C, and it has a good repeatable warning performance under high-temperature conditions. The CS composite film exhibits an ultra-sensitive (0.4 s) warning under fire attacking. A possible electrical conduction and fire-alarm mechanisms are proposed. The addition of NaCl increases the number of charge carriers, which improves the ionic conductivity of the composite film. This study provides a possibility for the application of CS in the field of fire warning.
Collapse
Affiliation(s)
- Yong Wang
- School of Safety Science and Emergency Management, Wuhan University of Technology, Wuhan 430070, China
| | - Gongqing Chen
- School of Safety Science and Emergency Management, Wuhan University of Technology, Wuhan 430070, China
| | - Fangzhou Yang
- School of Safety Science and Emergency Management, Wuhan University of Technology, Wuhan 430070, China
| | - Zihao Luo
- School of Safety Science and Emergency Management, Wuhan University of Technology, Wuhan 430070, China
| | - Bihe Yuan
- School of Safety Science and Emergency Management, Wuhan University of Technology, Wuhan 430070, China.
| | - Xianfeng Chen
- School of Safety Science and Emergency Management, Wuhan University of Technology, Wuhan 430070, China
| | - Liancong Wang
- State Key Laboratory of Coal Mine Safety Technology, CCTEG Shenyang Research Institute, Fushun 113122, China
| |
Collapse
|
41
|
Nanocellulose-enhanced organohydrogel with high-strength, conductivity, and anti-freezing properties for wearable strain sensors. Carbohydr Polym 2022; 277:118872. [PMID: 34893277 DOI: 10.1016/j.carbpol.2021.118872] [Citation(s) in RCA: 30] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2021] [Revised: 10/17/2021] [Accepted: 11/05/2021] [Indexed: 12/15/2022]
Abstract
The use of ion-conductive hydrogels in strain sensors with high mechanical properties, conductivity, and anti-freezing properties is challenging. Here, high-strength, transparent, conductive, and anti-freezing organohydrogels were fabricated through the radical polymerization of polyacrylamide (PAM)/sodium alginate (SA)/TEMPO-oxidized cellulose nanofibrils (TOCNs) in a dimethyl sulfoxide (DMSO)/water solution, followed by soaking in a CaCl2 solution. The resulting organohydrogels demonstrated a high strength (tensile strength of 1.04 MPa), stretchability (681%), transparency (>84% transmittance), and ionic conductivity (1.25 S m-1). The organohydrogel-based strain sensor showed a high strain sensitivity (GF = 2.1). In addition, due to a synergistic effect between the DMSO/H2O binary solvent and CaCl2, the organohydrogel remained flexible (could bend 180°) and conductive (1.01 S m-1) at -20 °C. Interestingly, the TOCNs exerted a reinforcing effect on both the mechanical properties and ionic conductivity. This research provides a novel strategy to prepare ion-conductive organohydrogels with good mechanical properties, conductivity, and anti-freezing properties for use as flexible electronic materials.
Collapse
|
42
|
Liang Y, Shen Y, Sun X, Liang H. Preparation of stretchable and self-healable dual ionically cross-linked hydrogel based on chitosan/polyacrylic acid with anti-freezing property for multi-model flexible sensing and detection. Int J Biol Macromol 2021; 193:629-637. [PMID: 34717973 DOI: 10.1016/j.ijbiomac.2021.10.060] [Citation(s) in RCA: 20] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/14/2021] [Revised: 10/02/2021] [Accepted: 10/08/2021] [Indexed: 11/16/2022]
Abstract
As a kind of promising material for flexible wearable electronics, conductive hydrogels have attracted extensive interests of researchers for their inherent merits such as superior mechanical properties, biocompatibility, and permeability. Herein, we constructed a new type of highly stretchable, anti-freezing, self-healable, and conductive hydrogel based on chitosan/polyacrylic acid. The large amount of ions inside the network had five functions for the proposed hydrogel, including excellent mechanical behaviors, high conductivity, self-recovery, self-healing and anti-freezing capability. Consequently, the proposed hydrogel possessed tunable stretchability (1190-1550%), tensile strength (0.96-2.56 MPa), toughness (5.7-14.7 MJ/m3), superior self-healing property (self-healing efficiency up to 83.7%), high conductivity (4.58-5.76 S/m), and excellent anti-freezing capability. To our knowledge, the self-healable hydrogel with balanced tensile strength, toughness, conductivity, and low-temperature tolerance can hardly be achieved till now. Furthermore, the conductive hydrogels exhibited high sensitivity (gauge factor up to 10.8) in a broad strain window (0-1000%) and could detect the conventional motion signals of human body such as bending of a knuckle, swallowing, and pressure signal at both room temperature and -20 °C. Moreover, the hydrogels could also be fabricated as flexible detectors to identify different temperatures, different kinds of solutions, and different concentrations of the solution.
Collapse
Affiliation(s)
- Yongzhi Liang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, Anhui 230026, China
| | - Yuexin Shen
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, Anhui 230026, China
| | - Xingyue Sun
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, Anhui 230026, China
| | - Haiyi Liang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, Anhui 230026, China; IAT-Chungu Joint Laboratory for Additive Manufacturing, Institute of Advanced Technology, University of Science and Technology of China, Hefei, Anhui 230026, China.
| |
Collapse
|
43
|
Zeng R, Lu S, Qi C, Jin L, Xu J, Dong Z, Lei C. Polyacrylamide/carboxymethyl chitosan double‐network hydrogels with high conductivity and mechanical toughness for flexible sensors. J Appl Polym Sci 2021. [DOI: 10.1002/app.51993] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Affiliation(s)
- Runpeng Zeng
- School of Materials and Energy Guangdong University of Technology Guangzhou China
| | - Shuxin Lu
- School of Materials and Energy Guangdong University of Technology Guangzhou China
| | - Chuyi Qi
- School of Materials and Energy Guangdong University of Technology Guangzhou China
| | - Lele Jin
- School of Materials and Energy Guangdong University of Technology Guangzhou China
| | - Jinbao Xu
- School of Materials and Energy Guangdong University of Technology Guangzhou China
| | - Zhixian Dong
- School of Materials and Energy Guangdong University of Technology Guangzhou China
| | - Caihong Lei
- School of Materials and Energy Guangdong University of Technology Guangzhou China
| |
Collapse
|
44
|
Chen X, Hao W, Lu T, Wang T, Shi C, Zhao Y, Liu Y. Stretchable Zwitterionic Conductive Hydrogels with Semi‐Interpenetrating Network Based on Polyaniline for Flexible Strain Sensors. MACROMOL CHEM PHYS 2021. [DOI: 10.1002/macp.202100165] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Xiaoling Chen
- College of Chemistry and Chemical Engineering Taiyuan University of Technology Taiyuan 030024 China
| | - Weizhen Hao
- College of Chemistry and Chemical Engineering Taiyuan University of Technology Taiyuan 030024 China
| | - Tiao Lu
- College of Chemistry and Chemical Engineering Taiyuan University of Technology Taiyuan 030024 China
| | - Tian Wang
- College of Chemistry and Chemical Engineering Taiyuan University of Technology Taiyuan 030024 China
| | - Caixin Shi
- College of Chemistry and Chemical Engineering Taiyuan University of Technology Taiyuan 030024 China
| | - Yansheng Zhao
- College of Chemistry and Chemical Engineering Taiyuan University of Technology Taiyuan 030024 China
| | - Yongmei Liu
- College of Chemistry and Chemical Engineering Taiyuan University of Technology Taiyuan 030024 China
- Institute of Fine Chemical Engineering Taiyuan University of Technology Taiyuan 030024 China
| |
Collapse
|
45
|
Zhang J, Wang Y, Wei Q, Wang Y, Lei M, Li M, Li D, Zhang L, Wu Y. Self-Healing Mechanism and Conductivity of the Hydrogel Flexible Sensors: A Review. Gels 2021; 7:216. [PMID: 34842713 PMCID: PMC8628684 DOI: 10.3390/gels7040216] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/21/2021] [Revised: 11/11/2021] [Accepted: 11/12/2021] [Indexed: 12/19/2022] Open
Abstract
Sensors are devices that can capture changes in environmental parameters and convert them into electrical signals to output, which are widely used in all aspects of life. Flexible sensors, sensors made of flexible materials, not only overcome the limitations of the environment on detection devices but also expand the application of sensors in human health and biomedicine. Conductivity and flexibility are the most important parameters for flexible sensors, and hydrogels are currently considered to be an ideal matrix material due to their excellent flexibility and biocompatibility. In particular, compared with flexible sensors based on elastomers with a high modulus, the hydrogel sensor has better stretchability and can be tightly attached to the surface of objects. However, for hydrogel sensors, a poor mechanical lifetime is always an issue. To address this challenge, a self-healing hydrogel has been proposed. Currently, a large number of studies on the self-healing property have been performed, and numerous exciting results have been obtained, but there are few detailed reviews focusing on the self-healing mechanism and conductivity of hydrogel flexible sensors. This paper presents an overview of self-healing hydrogel flexible sensors, focusing on their self-healing mechanism and conductivity. Moreover, the advantages and disadvantages of different types of sensors have been summarized and discussed. Finally, the key issues and challenges for self-healing flexible sensors are also identified and discussed along with recommendations for the future.
Collapse
Affiliation(s)
- Juan Zhang
- Industry Engineering Department, School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China; (J.Z.); (Y.W.); (M.L.); (M.L.); (D.L.); (L.Z.); (Y.W.)
- Institute of Medical Research, Northwestern Polytechnical University, Xi’an 710072, China
| | - Yanen Wang
- Industry Engineering Department, School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China; (J.Z.); (Y.W.); (M.L.); (M.L.); (D.L.); (L.Z.); (Y.W.)
- Institute of Medical Research, Northwestern Polytechnical University, Xi’an 710072, China
| | - Qinghua Wei
- Industry Engineering Department, School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China; (J.Z.); (Y.W.); (M.L.); (M.L.); (D.L.); (L.Z.); (Y.W.)
- Institute of Medical Research, Northwestern Polytechnical University, Xi’an 710072, China
| | - Yanmei Wang
- Industry Engineering Department, School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China; (J.Z.); (Y.W.); (M.L.); (M.L.); (D.L.); (L.Z.); (Y.W.)
- Institute of Medical Research, Northwestern Polytechnical University, Xi’an 710072, China
| | - Mingju Lei
- Industry Engineering Department, School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China; (J.Z.); (Y.W.); (M.L.); (M.L.); (D.L.); (L.Z.); (Y.W.)
- Institute of Medical Research, Northwestern Polytechnical University, Xi’an 710072, China
| | - Mingyang Li
- Industry Engineering Department, School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China; (J.Z.); (Y.W.); (M.L.); (M.L.); (D.L.); (L.Z.); (Y.W.)
- Institute of Medical Research, Northwestern Polytechnical University, Xi’an 710072, China
| | - Dinghao Li
- Industry Engineering Department, School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China; (J.Z.); (Y.W.); (M.L.); (M.L.); (D.L.); (L.Z.); (Y.W.)
- Institute of Medical Research, Northwestern Polytechnical University, Xi’an 710072, China
| | - Longyu Zhang
- Industry Engineering Department, School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China; (J.Z.); (Y.W.); (M.L.); (M.L.); (D.L.); (L.Z.); (Y.W.)
- Institute of Medical Research, Northwestern Polytechnical University, Xi’an 710072, China
| | - Yu Wu
- Industry Engineering Department, School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China; (J.Z.); (Y.W.); (M.L.); (M.L.); (D.L.); (L.Z.); (Y.W.)
- Institute of Medical Research, Northwestern Polytechnical University, Xi’an 710072, China
| |
Collapse
|
46
|
Yang J, Kang Q, Zhang B, Fang X, Liu S, Qin G, Chen Q. Strong, tough, anti-freezing, non-drying and sensitive ionic sensor based on fully physical cross-linked double network hydrogel. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2021; 130:112452. [PMID: 34702531 DOI: 10.1016/j.msec.2021.112452] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/12/2021] [Revised: 09/16/2021] [Accepted: 09/18/2021] [Indexed: 11/30/2022]
Abstract
Ionic conductive double network (DN) sensors have attracted increasing attention in wearable electronic devices. However, their low mechanical and sensing properties as well as poor moisture retention and freezing resistance restrict severely their applications. Herein, we synthesized a fully physical cross-linked poly (N-hydroxymethyl acrylamide)/agar/ethylene glycol (PHA/Agar/EG) ionic conductive DN hydrogel exhibiting high strength and toughness, fast self-recovery, good fatigue resistance and good self-healing. Agar could form a physical network via reversible sol-gel transition, and interact with physical cross-linked poly (N-hydroxymethyl acrylamide) and sodium chloride (NaCl) via hydrogen bonds and salting-out effect, respectively. Meanwhile, ethylene glycol and NaCl improved the mechanical properties, long-lasting moisture retention and anti-freezing ability. The PHA/Agar/EG gel-based flexible sensor possessed excellent long-lasting and fatigue resistant sensing properties, and could monitor various human activities stably and sensitively. Therefore, this work would provide a simple and promising strategy to fabricate flexible sensors with integrated high performances for smart wearable devices.
Collapse
Affiliation(s)
- Jia Yang
- School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, PR China
| | - Qiong Kang
- School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, PR China
| | - Bin Zhang
- School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, PR China
| | - Xiaohan Fang
- School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, PR China
| | - Shuzheng Liu
- School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, PR China
| | - Gang Qin
- School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, PR China.
| | - Qiang Chen
- Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou 325001, PR China; Oujiang Laboratory (Zhejiang Lab for Regenerative Medicine, Vision and Brain Health), Wenzhou, Zhejiang 325000, PR China.
| |
Collapse
|
47
|
Lu Y, Yue Y, Ding Q, Mei C, Xu X, Wu Q, Xiao H, Han J. Self-Recovery, Fatigue-Resistant, and Multifunctional Sensor Assembled by a Nanocellulose/Carbon Nanotube Nanocomplex-Mediated Hydrogel. ACS APPLIED MATERIALS & INTERFACES 2021; 13:50281-50297. [PMID: 34637615 DOI: 10.1021/acsami.1c16828] [Citation(s) in RCA: 58] [Impact Index Per Article: 19.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Flexible sensors have attracted great research interest due to their applications in artificial intelligence, wearable electronics, and personal health management. However, due to the inherent brittleness of common hydrogels, preparing a hydrogel-based sensor integrated with excellent flexibility, self-recovery, and antifatigue properties still remains a challenge to date. In this study, a type of physically and chemically dual-cross-linked conductive hydrogels based on 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofiber (TOCN)-carrying carbon nanotubes (CNTs) and polyacrylamide (PAAM) matrix via a facial one-pot free-radical polymerization is developed for multifunctional wearable sensing application. Inside the hierarchical gel network, TOCNs not only serve as the nanoreinforcement with a toughening effect but also efficiently assist the homogeneous distribution of CNTs in the hydrogel matrix. The optimized TOCN-CNT/PAAM hydrogel integrates high compressive (∼2.55 MPa at 60% strain) and tensile (∼0.15 MPa) strength, excellent intrinsic self-recovery property (recovery efficiency >92%), and antifatigue capacity under both cyclic stretching and pressing. The multifunctional sensors assembled by the hydrogel exhibit both high strain sensitivity (gauge factor ≈11.8 at 100-200% strain) and good pressure sensing ability over a large pressure range (0-140 kPa), which can effectively detect the subtle and large-scale human motions through repeatable and stable electrical signals even after 100 loading-unloading cycles. The comprehensive performance of the TOCN-CNT/PAAM hydrogel-based sensor is superior to those of most gel-based sensors previously reported, indicating its potential applications in multifunctional sensing devices for healthcare systems and human motion monitoring.
Collapse
Affiliation(s)
- Ya Lu
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, Joint International Research Lab of Lignocellulosic Functional Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Yiying Yue
- College of Biology and Environment, Nanjing Forestry University, Nanjing 210037, China
| | - Qinqin Ding
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, Joint International Research Lab of Lignocellulosic Functional Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Changtong Mei
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, Joint International Research Lab of Lignocellulosic Functional Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Xinwu Xu
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, Joint International Research Lab of Lignocellulosic Functional Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Qinglin Wu
- School of Renewable Natural Resources, Louisiana State University, Baton Rouge, Louisiana 70803, United States
| | - Huining Xiao
- Chemical Engineering Department, New Brunswick University, Fredericton, New Brunswick E3B 5A3, Canada
| | - Jingquan Han
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, Joint International Research Lab of Lignocellulosic Functional Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| |
Collapse
|
48
|
Ou Y, Tian M. Advances in multifunctional chitosan-based self-healing hydrogels for biomedical applications. J Mater Chem B 2021; 9:7955-7971. [PMID: 34611684 DOI: 10.1039/d1tb01363g] [Citation(s) in RCA: 63] [Impact Index Per Article: 21.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
Multifunctional self-healing hydrogels have recently attracted considerable interest in biomedical applications owing to their diverse properties, including self-healing, adhesion, conduction, antibacterial, and stimulus-response, which can meet various application requirements, ranging from wound dressings and delivery vehicles to the production of scaffolds for tissue repair and regeneration. As a natural polycationic polysaccharide with good biocompatibility, chitosan is widely used in hydrogel formation as there are many amino and hydroxyl groups along the chains that can actively participate in various physical effects and chemical reactions, which enable it to construct self-healing hydrogels and fulfill multiple functions. In this review, the formation of chitosan-based self-healing hydrogels and the related self-healing mechanism are summarized, including Schiff base, metal coordination, ionic and hydrogen bonds, hydrophobic and host-guest interactions, with a focus on the strategies for their multi-functionalization. In the last section, the applications of the chitosan-based self-healing hydrogels in the fields of wound dressings, delivery vehicles, scaffolds, and biological sensors are discussed. Overall, it is highly expected that this review could provide an insight into the prospective development of multifunctional self-healing hydrogels for biomedical applications.
Collapse
Affiliation(s)
- Yi Ou
- Neurosurgery Research Laboratory, National Clinical Research Center for Geriatrics, West China Hospital, Sichuan University, Chengdu, 610041, Sichuan, China.
| | - Meng Tian
- Neurosurgery Research Laboratory, National Clinical Research Center for Geriatrics, West China Hospital, Sichuan University, Chengdu, 610041, Sichuan, China. .,Department of Neurosurgery, West China Hospital, Sichuan University, Chengdu, 610041, Sichuan, China.,West China Brain Research Centre, West China Hospital, Sichuan University, Chengdu, 610041, Sichuan, China
| |
Collapse
|
49
|
Liang L, Lv H, Shi XL, Liu Z, Chen G, Chen ZG, Sun G. A flexible quasi-solid-state thermoelectrochemical cell with high stretchability as an energy-autonomous strain sensor. MATERIALS HORIZONS 2021; 8:2750-2760. [PMID: 34617552 DOI: 10.1039/d1mh00775k] [Citation(s) in RCA: 23] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The design of effective energy systems is crucial for the development of flexible and wearable electronics. Regarding the direct conversion of heat into electricity, thermoelectrochemical cells (TECs) are particularly suitable for low-grade heat harvesting to enable flexible and wearable applications, despite the fact that the electrolyte leakage and complex packaging issues of conventional liquid-based TECs await to be further addressed. Herein, a quasi-solid-state TEC is assembled using the polyacrylamide/acidified-single-walled carbon nanotube (PAAm/a-SWCNT) composite hydrogel, developed via a facile in situ free-radical polymerization route with tin(IV) chloride/tin(II) chloride (Sn4+/Sn2+) as the redox couple. The as-fabricated TEC with a 0.6 wt% a-SWCNT content presents a large thermoelectrochemical Seebeck coefficient of 1.59 ± 0.07 mV K-1 and exhibits excellent stability in thermoelectrochemical performance against large mechanical stretching and deformation. Owing to this superior stretchability, the as-fabricated TEC is further assembled into an energy-autonomous strain sensor, which shows high sensitivity. The strategy of utilizing a quasi-solid-state TEC for energy-autonomous strain sensing unveils the great potential of heat-to-electricity conversion in flexible and wearable electronics.
Collapse
Affiliation(s)
- Lirong Liang
- Joint Key Laboratory of the Ministry of Education, Institute of Applied Physics and Materials Engineering, University of Macau, Avenida da Universidade, Taipa, SAR, Macau, China.
| | - Haicai Lv
- College of Materials Science and Engineering, Shenzhen University, Shenzhen, 518055, China.
| | - Xiao-Lei Shi
- Centre for Future Materials, University of Southern Queensland, Springfield Central, Queensland, 4300, Australia.
| | - Zhuoxin Liu
- College of Materials Science and Engineering, Shenzhen University, Shenzhen, 518055, China.
| | - Guangming Chen
- College of Materials Science and Engineering, Shenzhen University, Shenzhen, 518055, China.
| | - Zhi-Gang Chen
- Centre for Future Materials, University of Southern Queensland, Springfield Central, Queensland, 4300, Australia.
| | - Guoxing Sun
- Joint Key Laboratory of the Ministry of Education, Institute of Applied Physics and Materials Engineering, University of Macau, Avenida da Universidade, Taipa, SAR, Macau, China.
| |
Collapse
|
50
|
Waresindo WX, Luthfianti HR, Edikresnha D, Suciati T, Noor FA, Khairurrijal K. A freeze-thaw PVA hydrogel loaded with guava leaf extract: physical and antibacterial properties. RSC Adv 2021; 11:30156-30171. [PMID: 35480264 PMCID: PMC9040922 DOI: 10.1039/d1ra04092h] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/26/2021] [Accepted: 08/22/2021] [Indexed: 12/25/2022] Open
Abstract
A polyvinyl alcohol (PVA) hydrogel loaded with guava leaf extract (GLE) has potential applications as a wound dressing with good antibacterial activity. This study succeeded in fabricating a PVA hydrogel containing GLE using the freeze-thaw (FT) method. By varying the GLE concentration, we can adjust the physical properties of the hydrogel. The addition of GLE results in a decrease in cross-linking during gelation and an increase in the pore size of the hydrogels. The increase of the pore size made the swelling increase and the mechanical strength decrease. The weight loss of the hydrogel also increases because the phosphate buffer saline (PBS) dissolves the GLE. Increasing the GLE concentration caused the Fourier-transform infrared (FTIR) absorbance peaks to widen due to hydrogen bonds formed during the FT process. The crystalline phase was transformed into an amorphous phase in the PVA/GLE hydrogel based on the X-ray diffraction (XRD) spectra. The differential scanning calorimetry (DSC) characterization showed a significant decrease in the hydrogel weight over temperatures of 30-150 °C due to the evaporation of water from the hydrogel matrix. The zone of inhibition of the PVA/GLE hydrogel increased with antibacterial activity against Staphylococcus aureus of 17.93% per gram and 15.79% per gram against Pseudomonas aeruginosa.
Collapse
Affiliation(s)
- William Xaveriano Waresindo
- Department of Physics, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung Jalan Ganesa 10 Bandung 40132 Indonesia
- University Center of Excellence - Nutraceutical, Bioscience and Biotechnology Research Center, Institut Teknologi Bandung Jalan Ganesa 10 Bandung 40132 Indonesia
| | - Halida Rahmi Luthfianti
- Department of Physics, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung Jalan Ganesa 10 Bandung 40132 Indonesia
- University Center of Excellence - Nutraceutical, Bioscience and Biotechnology Research Center, Institut Teknologi Bandung Jalan Ganesa 10 Bandung 40132 Indonesia
| | - Dhewa Edikresnha
- Department of Physics, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung Jalan Ganesa 10 Bandung 40132 Indonesia
- University Center of Excellence - Nutraceutical, Bioscience and Biotechnology Research Center, Institut Teknologi Bandung Jalan Ganesa 10 Bandung 40132 Indonesia
| | - Tri Suciati
- Department of Pharmaceutics, School of Pharmacy, Institut Teknologi Bandung Jalan Ganesa 10 Bandung 40132 Indonesia
| | - Fatimah Arofiati Noor
- Department of Physics, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung Jalan Ganesa 10 Bandung 40132 Indonesia
| | - Khairurrijal Khairurrijal
- Department of Physics, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung Jalan Ganesa 10 Bandung 40132 Indonesia
- University Center of Excellence - Nutraceutical, Bioscience and Biotechnology Research Center, Institut Teknologi Bandung Jalan Ganesa 10 Bandung 40132 Indonesia
| |
Collapse
|