Fungal chitin-glucan nanopapers with heavy metal adsorption properties for ultrafiltration of organic solvents and water

Hybrid method integrating adsorption and chemical precipitation of heavy metal ions on polymeric fiber surfaces for highly efficient water purification

A lot of research has been focused on increasing the specific surface area of adsorbents over a long period of time to remove heavy metal ions from wastewater using the adsorbent. However, porous adsorbents with high specific surface area have demonstrated drawbacks in water purification processes, such as high pressure drop and limitations in the adsorption capacity of heavy metal ions. In recent years, a mechanism-based convergence method involving adsorption/chemical precipitation has emerged as a promising strategy to surmount the constraints associated with porous adsorbents. The mechanism involves amine groups on chelating fibers dissociating OH- ions from water molecules, thereby raising the pH near the fibers. This elevated pH promotes the crystallization of heavy metal ions on the fiber surfaces. The removal of heavy metal ions proceeds through a sequence of adsorption and chemical precipitation processes. An adsorbent based on chelating fibers, integrating adsorption technology with chemical precipitation, demonstrates superior performance in removing significant quantities of heavy metal ions (ca. 1000-2000 mg/g for Cd2+, Cu2+ and Pb2+) when compared to developed porous adsorbents (ca. 50-760 mg/g for same ions). This review paper introduces advanced polymer fibers endowed with the capability to integrate hybrid technology, delves into the mechanism of hybrid technology, and examines its application in process technology for the effective removal of heavy metal ions. The versatility of these advanced fibers extends far beyond the removal of heavy metal ions in water treatment, making them poised to garner significant attention from researchers across diverse fields due to their broad range of potential applications. After further processes involving the removal of templates from chelating polymeric fibers used as supports and the reduction of precipitated heavy metal oxide crystals, the resulting heavy metal crystals can exhibit thin walls and well-interconnected porous structures, suitable for catalytic applications.

High-Performance Engineered Composites Biofabrication Using Fungi

Various natural polymers offer sustainable alternatives to petroleum-based adhesives, enabling the creation of high-performance engineered materials. However, additional chemical modifications and complicated manufacturing procedures remain unavoidable. Here, a sustainable high-performance engineered composite that benefits from bonding strategies with multiple energy dissipation mechanisms dominated by chemical adhesion and mechanical interlocking is demonstrated via the fungal smart creative platform. Chemical adhesion is predominantly facilitated by the extracellular polymeric substrates and glycosylated proteins present in the fungal outer cell walls. The dynamic feature of non-covalent interactions represented by hydrogen bonding endows the composite with extensive unique properties including healing, recyclability, and scalable manufacturing. Mechanical interlocking involves multiple mycelial networks (elastic modulus of 2.8 GPa) binding substrates, and the fungal inner wall skeleton composed of chitin and β-glucan imparts product stability. The physicochemical properties of composite (modulus of elasticity of 1455.3 MPa, internal bond strength of 0.55 MPa, hardness of 82.8, and contact angle of 110.2°) are comparable or even superior to those of engineered lignocellulosic materials created using petroleum-based polymers or bioadhesives. High-performance composite biofabrication using fungi may inspire the creation of other sustainable engineered materials with the assistance of the extraordinary capabilities of living organisms.

Properties and environmental sustainability of fungal chitin nanofibril reinforced cellulose acetate films and nanofiber mats by solution blow spinning

Materials from biological origin composed by renewable carbon facilitate the transition from linear carbon-intensive economy to a sustainable circular economy. Accordingly, we use solution blow spinning to develop fully biobased cellulose acetate films and nanofiber mats reinforced with fungal chitin nanofibrils (ChNFs), an emerging bio-colloid with lower carbon footprint compared to crustacean-derived nanochitin. This study incorporates fungal ChNFs into spinning processes for the first time. ChNF addition reduces film surface roughness, modifies film water affinity, and tailors the nanofiber diameter of the mats. The covalently bonded β-D-glucans of ChNFs act as a binder to improve the interfacial properties and consequently load transference to enhance the mechanical properties. Accordingly, the Young's modulus of the films increases from 200 ± 18 MPa to 359 ± 99 MPa with 1.5 wt% ChNFs, while the elongation at break increases by ~45 %. Life cycle assessment (LCA) is applied to quantify the environmental impacts of solution blow spinning for the first time, providing global warming potential values of 69.7-347.4 kg·CO2-equiv.·kg-1. Additionally, this work highlights the suitability of ChNFs as reinforcing fillers during spinning and proves the reinforcing effect of mushroom-derived chitin in bio-based films, opening alternatives for sustainable materials development beyond nanocelluloses in the near future.

Environmental Sustainability and Physicochemical Property Screening of Chitin and Chitin-Glucan from 22 Fungal Species

Thanks to its biobased character with embedded biogenic carbon, chitin can aid in the transition to a sustainable circular economy by replacing fossil carbon from the geosphere. However, meeting current demands for material availability and environmental sustainability requires alternative methods limiting conventional chemical and energy-consuming chitin extraction from crustaceans. To assist future chitinous bioproduct development, this work analyzes the physicochemical properties and potential environmental sustainability of fungal chitin-glucan complexes. A conventional isolation procedure using sodium hydroxide, a weak acid, and short reaction times are applied to the fruiting body of 22 fungal species. Besides, the valorization of underutilized waste streams including Agaricus bisporus and Agaricus brunnescens stipes is investigated. The carbohydrate analysis renders chitin fractions in the range of 9.5-63.5 wt %, while yields vary from 4.2 to 29.9%, and the N-acetylation degree in found in between 53.0 and 98.7%. The sustainability of the process is analyzed using life cycle assessment (LCA), providing impact quantification for global warming potential, terrestrial acidification, freshwater eutrophication, and water use. With 87.5-589.3 kg·CO2-equiv per kilo, potentially lower global warming potential values in comparison to crustacean chitin are achieved. The crystallinity degree ranged from 28 to 78%, while the apparent chitin crystalline size (L020) is between 2.3 and 5.4 nm. Ten of the species yield α-chitin coexisting with semicrystalline glucans. Zwitterionic properties are observed in aqueous solutions, shifting from cationic to anionic at pH 4.5. With its renewable carbon content, fungal chitin is an environmentally sustainable alternative for high-value applications due to its balance of minimal treatment, low carbon footprint, material renewability, ease of isolation, thermal stability, zwitterionic behavior, biodegradability, and noncytotoxicity.

The function and application of edible fungal polysaccharides

Edible fungi, commonly known as mushrooms, are precious medicinal and edible homologous gifts from nature to us. Edible fungal polysaccharides (EFPs) are a variety of bioactive macromolecular which isolated from fruiting bodies, mycelia or fermentation broths of edible or medicinal fungus. Increasing researches have confirmed that EFPs possess multiple biological activities both in vitro and in vivo settings, including antioxidant, antiviral, anti-inflammatory, immunomodulatory, anti-tumor, hypoglycemic, hypolipidemic, and regulating intestinal flora activities. As a result, they have emerged as a prominent focus in the healthcare, pharmaceutical, and cosmetic industries. Fungal EFPs have safe, non-toxic, biodegradable, and biocompatible properties with low immunogenicity, bioadhesion ability, and antibacterial activities, presenting diverse potential applications in the food industries, cosmetic, biomedical, packaging, and new materials. Moreover, varying raw materials, extraction, purification, chemical modification methods, and culture conditions can result in variances in the structure and biological activities of EFPs. The purpose of this review is to provide comprehensively and systematically organized information on the structure, modification, biological activities, and potential applications of EFPs to support their therapeutic effects and health functions. This review provides new insights and a theoretical basis for prospective investigations and advancements in EFPs in fields such as medicine, food, and new materials.

"You Are What You Eat": How Fungal Adaptation Can Be Leveraged toward Myco-Material Properties

Fungi adapt to their surroundings, modifying their behaviors and composition under different conditions like nutrient availability and environmental stress. This perspective examines how a basic understanding of fungal genetics and the different ways that fungi can be influenced by their surroundings can be leveraged toward the production of functional mycelium materials. Simply put, within the constraints of a given genetic script, both the quality and quantity of fungal mycelium are shaped by what they eat and where they grow. These two levers, encompassing their global growth environment, can be turned toward different materials outcomes. The final properties of myco-materials are thus intimately shaped by the conditions of their growth, enabling the design of new biobased and biodegradable material constructions for applications that have traditionally relied on petroleum-based chemicals.This perspective highlights aspects of fungal genetics and environmental adaptation that have potential materials science implications, along the way touching on key studies, both to situate the state of the art within the field and to punctuate the viewpoints of the authors. Finally, this work ends with future perspectives, reinforcing key topics deemed important to consider in emerging myco-materials research.

Fabrication of chitin-glucan nanofibers: Insights into mushroom pretreatment and subsequent acidic deep eutectic solvent-based esterification

Mushrooms contain chitin-glucan complex (CGC), a natural copolymer of chitin and glucan, and nanofibrillation enhances its applicability. Here, a novel method was used to fabricate chitin-glucan nanofibers (CGNFs) from white button mushrooms. The first stage was to pretreat the raw mushroom using hot water and alkali to remove water-soluble glucans and alkali-soluble proteins, respectively, producing a CGC amenable to nanofibrillation. The second stage was nanofibrillation via esterification using acidic deep eutectic solvents (DESs) and subsequent ultrasonication. Five choline chloride-based DESs containing mono- or dicarboxylic acid were tested for the CGC esterification. DESs with strong dicarboxylic acids expedited nanofibrillation by homogeneously dispersing the solid CGC, swelling CGC fibrils, and facilitating acidity-dependent esterification leading to steric and electrostatic repulsions. One CGNF, namely CGNF_CCMnA, was characterized: it contained chitin and glucan at an approximate ratio of 8:2 and exhibited desirable properties as nanomaterials, including small diameter (11 nm) and high colloidal (zeta potential < -30 mV above pH 5.8) and thermal stability (Tm, 315 °C). CGNF_CCMnA was tested for the adsorption to methylene blue, revealing a maximum adsorption capacity of 82.58 mg/g. The proposed approach is an efficient and readily applicable method to fabricate various mushroom-derived safe CGNFs and to produce related nanomaterials.

Cytotoxicity and Inflammatory Effects of Chitin Nanofibrils Isolated from Fungi

Fungal nanochitin can assist the transition from the linear fossil-based economy to a circular biobased economy given its environmental benefits over conventional crustacean-nanochitin. Its real-world implementation requires carefully assessing its toxicity so that unwanted human health and environmental issues are avoided. Accordingly, the cytotoxicity and inflammatory effects of chitin nanofibrils (ChNFs) from white mushroom is assessed. ChNFs are few nanometers in diameter, with a 75.8% N-acetylation degree, a crystallinity of 59.1%, and present a 44:56 chitin/glucan weight ratio. Studies are conducted for aqueous colloidal ChNF dispersions (0-5 mg·mL-1) and free-standing films having physically entangled ChNFs. Aqueous dispersions of chitin nanocrystals (ChNCs) isolated via hydrochloric acid hydrolysis of α-chitin powder are also evaluated for comparison. Cytotoxicity studies conducted in human fibroblasts (MRC-5 cells) and murine brain microglia (BV-2 cells) reveal a comparatively safer behavior over related biobased nanomaterials. However, a strong inflammatory response was observed when BV-2 cells were cultured in the presence of colloidal ChNFs. These novel cytotoxicity and inflammatory studies shed light on the potential of fungal ChNFs for biomedical applications.

Mycelium Composite with Hierarchical Porous Structure for Thermal Management

High-performance porous materials with a low carbon footprint provide sustainable alternatives to petroleum-based lightweight foams and can help meet carbon neutrality goals. However, these materials generally face a trade-off between thermal management capabilities and structural strength. Here, a mycelium composite with a hierarchical porous structure, including both macro- and microscale pores, produced from multiple and advanced mycelial networks (elastic modulus of 1.2 GPa) binding loosely distributed sawdust is demonstrated. The morphological, biological, and physicochemical properties of the filamentous mycelium and composites are discussed in terms of how they are influenced by the mycelial system of the fungi and the way they interact with the substrate. The composite shows a porosity of 0.94, a noise reduction coefficient of 0.55 at a frequency range of 250-3000 Hz (for a 15 mm thick sample), a thermal conductivity of 0.042 W m-1  K-1 , and an energy absorption of 18 kJ m-3 at 50% strain. It is also hydrophobic, repairable, and recyclable. It is expected that the hierarchical porous structural composite with excellent thermal and mechanical properties can make a significant impact on the future development of highly sustainable alternatives to lightweight plastic foams.

Chitin Nanofibrils from Fungi for Hierarchical Gel Polymer Electrolytes for Transient Zinc-Ion Batteries with Stable Zn Electrodeposition

Rechargeable batteries play an integral role toward carbon neutrality. Environmentally sustainable batteries should consider the trade-offs between material renewability, processability, thermo-mechanical and electrochemical performance, as well as transiency. To address this dilemma, we follow circular economy principles to fabricate fungal chitin nanofibril (ChNF) gel polymer electrolytes (GPEs) for zinc-ion batteries. These biocolloids are physically entangled into hierarchical hydrogels with specific surface areas of 49.5 m2 ·g-1 . Ionic conductivities of 54.1 mS·cm-1 and a Zn2+ transference number of 0.468 are reached, outperforming conventional non-renewable/non-biodegradable glass microfibre separator-liquid electrolyte pairs. Enabled by its mechanically elastic properties and large water uptake, a stable Zn electrodeposition in symmetric Zn|Zn configuration with a lifespan above 600 h at 9.5 mA·cm-2 is obtained. At 100 mA·g-1 , the discharge capacity of Zn/α-MnO2 full cells increases above 500 cycles when replacing glass microfiber separators with ChNF GPEs, while the rate performance remains comparable to glass microfiber separators. To make the battery completely transient, the metallic current collectors are replaced by biodegradable polyester/carbon black composites undergoing degradation in water at 70 °C. This work demonstrates the applicability of bio-based materials to fabricate green and electrochemically competitive batteries with potential applications in sustainable portable electronics, or biomedicine.

Safe Production Strategies for Soil-Covered Cultivation of Morel in Heavy Metal-Contaminated Soils

Morel is a popular edible mushroom with considerable medicinal and economic value which has garnered global popularity. However, the increasing heavy metal (HM) pollution in the soil presents a significant challenge to morels cultivation. Given the susceptibility of morels to HM accumulation, the quality and output of morels are at risk, posing a serious food safety concern that hinders the development of the morel industry. Nonetheless, research on the mechanism of HM enrichment and mitigation strategies in morel remains scarce. The morel, being cultivated in soil, shows a positive correlation between HM content in its fruiting body and the HM content in the soil. Therefore, soil remediation emerges as the most practical and effective approach to tackle HM pollution. Compared to physical and chemical remediation, bioremediation is a low-cost and eco-friendly approach that poses minimal threats to soil composition and structure. HMs easily enriched during morels cultivation were examined, including Cd, Cu, Hg, and Pb, and we assessed soil passivation technology, microbial remediation, strain screening and cultivation, and agronomic measures as potential approaches for HM pollution prevention. The current review underscores the importance of establishing a comprehensive system for preventing HM pollution in morels.

Carbon black and chitin nanofibers for green tyres: Preparation and property evaluation

This research highlights the synergistic use of carbon black (CB) and chitin nanofibers (CHNFs) for developing green tyres for the first time. The CHNFs (12-30 nm) were prepared from chitin powder with the help of steam explosion and mild oxalic acid hydrolysis. The CHNFs were uniformly dispersed in natural rubber (NR) latex, dried, and mixed with CB in a two-roll mill to form NR/CB/CHNF composites. The NR/CB/CHNF composite at 1 phr CHNF loading exhibited tensile and tear strengths that were about 47 and 160 % greater than the NR-Neat, respectively. The dynamic mechanical analysis showed that the loss tangent (tan δ) at 60 °C was 50 % lower for the NR/CB/CHNF 1.0 composite than for the NR/CB50 composite. The study succeeded in developing a new green tyre tread formulation that would be helpful for attaining sustainability and a circular economy.

Reusable and Biodegradable Separation Membranes Prepared from Common Mushrooms for the Removal of Oily and Particulate Contaminants from Water

Mushroom chitin membranes with controllable pore structures were fabricated through a simple process with naturally abundant Agaricus bisporus mushrooms. A freeze-thaw method was applied to alter the pore structures of the membranes, which consist of chitin fibril clusters within the glucan matrix. With tunable pore size and distribution, mushroom chitin membranes could effectively separate stable oil/water emulsions (dodecane, toluene, isooctane, and chili oil) with various chemical properties and concentrations and particle contaminants (carbon black and microfibers) from water. Chitin fibrils tightly pack with each other to form a dense membrane, leading to no permeation of contaminants or water. An increasing number of applied freeze-thaw cycles confers more tortuous pore structures throughout the mushroom chitin membranes, leading to higher flux while maintaining rejection performance. The 3D simulation constructed by the X-ray computed tomography and GeoDict software also demonstrated capturing a considerable amount of contaminants within the membranes' pores, which can be easily removed by water rinsing for further successive filtration. Furthermore, mushroom chitin membranes were almost completely biodegraded after approximately a month of being buried in the soil or kept in a lysozyme solution while possessing mechanical durability demonstrated by consistent filtration performance for repeated usage up to 15 cycles under ambient and external pressure. This research is a proof of concept that mushroom-derived chitin develops functional and biodegradable materials for environmental applications with scalability.

Engineered living materials grown from programmable Aspergillus niger mycelial pellets

The development of engineered living materials (ELMs) has recently attracted significant attention from researchers across multiple disciplines. Fungi-derived ELMs represent a new type of macroscale, cost-effective, environmentally sustainable materials. However, current fungi-based ELMs either have to undergo a final process to heat-kill the living cells or rely on the co-culture with a model organism for functional modification, which hinders the engineerability and versatility of these materials. In this study, we report a new type of ELMs - grown from programmable Aspergillus niger mycelial pellets - by a simple filtration step under ambient conditions. We demonstrate that A. Niger pellets can provide sufficient cohesion to maintain large-area self-supporting structures even under low pH conditions. Subsequently, by tuning the inducible expression of genes involved in melanin biosynthesis, we verified the fabrication of self-supporting living membrane materials with tunable colors in response to xylose concentration in the surroundings, which can be further explored as a potential biosensor for detecting xylose level in industrial wastewater. Notably, the living materials remain alive, self-regenerative, and functional even after 3-month storage. Thus, beyond reporting a new engineerable fungi chassis for constructing ELMs, our study provides new opportunities for developing bulk living materials for real-world applications such as the production of fabrics, packaging materials, and biosensors.

Foaming of oxidized nanocellulose for the preparation of high-flux water filters

Treatment of polluted water is an important task to secure access to clean water also for future generations. Filters are an efficient means to reject various pollutants on a wide range of size scales either by size-exclusion or electrostatic interaction, respectively. Commonly, filters and membranes from various synthetic materials are employed for these applications. Recently, filters based on renewable (nano) cellulose papers and coatings emerged as sustainable alternative to synthetic materials usually utilized. However, fabrication of such paper network structures from aqueous suspension by filtration processes is a time-consuming process caused by the high water holding capacity of highly hydrophilic and negatively charged nanocellulose fibrils. To optimize the preparation of nanocellulose coated filters, substitution of water by air and thus generating nanocellulose foams that are collapsed onto a substrate would be an appealing approach. Here we present the development of foams from negatively charged TEMPO-oxidized nanocellulose by screening various surfactants and concentrations to generate a foam stable enough to be transferred onto a viscose substrate. Foams were collapsed by oven consolidation, positive pressure filtration, or hot-pressing, respectively. Consolidated filters were tested for their water permeance and rejection of heavy metal ions using copper ions as model system. Very high permeances competitive to commercial filters based on synthetic polymers were achieved. Furthermore, adsorption capacities for copper of up to 70 mg/g were found. This is close to adsorption capacities reported for negatively charged TEMPO-oxidized nanocellulose in conventional batch-wise static adsorption. However, in the current process adsorption takes place during filtration of water through filters in a continuous process which constitutes a tremendous advantage.

Graphical Abstract

Transcriptome Analysis and SNP Identification Reveal That Heterologous Overexpression of Two Uncharacterized Genes Enhances the Tolerance of Magnaporthe oryzae to Manganese Toxicity

Manganese is a crucial trace element that constitutes the cofactors of many enzymes. However, excessive Mn2+ can be toxic for both prokaryotes and eukaryotes. The mechanism of fungal genetics and metabolism in response to Mn2+ stress remains understudied, warranting further studies. Magnaporthe oryzae is well-established as the most destructive pathogen of rice. A field strain, YN2046, more sensitive to Mn2+ toxicity than other strains, was obtained from a previous study. Herein, we explored the genetic mechanisms of Mn2+ sensitivity in YN2046 through comparative transcriptomic analyses. We found that many genes previously reported to participate in Mn2+ stress were not regulated in YN2046. These non-responsive genes might cause Mn2+ sensitivity in YN2046. Weight gene correlation network analysis (WGCNA) was performed to characterize the expression profile in YN2046. Some overexpressed genes were only found in the Mn2+ tolerant isolate YN125. Among these, many single nucleotide polymorphism (SNP) were identified between YN125 and YN2046, which might disrupt the expression levels of Mn responsive genes. We cloned two uncharacterized genes, MGG_13347 and MGG_16609, from YN125 and transformed them to YN2046 with a strong promoter. Our results showed that the heterologous overexpression of two genes in YN2046 restored its sensitivity. Transcriptomic and biochemical analyses were performed to understand Mn tolerance mechanisms mediated by the two heterologous overexpressed genes. Our results showed that heterologous overexpression of these two genes activated downstream gene expression and metabolite production to restore M. oryzae sensitivity to Mn, implying that SNPs in responsive genes account for different phenotypes of the two strains under Mn stress. IMPORTANCE Heavy metals are used for fungicides as they target phytopathogen in multiple ways. Magnaporthe oryzae is the most destructive rice pathogen and is threatening global rice production. In the eukaryotes, the regulation mechanisms of Mn homeostasis often focus on the posttranslation, there were a few results about regulation at transcript level. The comparative transcriptome analysis showed that fewer genes were regulated in the Mn-sensitive strain. WGCNA and SNP analyses found that mutations in promoter and coding sequence regions might disrupt the expression of genes involved in Mn detoxification in the sensitive strain. We transferred two unannotated genes that were cloned from the Mn-tolerant strain into a sensitive strain with strong promoters, and the transformants exhibited an enhanced tolerance to Mn2+ toxicity. Transcriptome and biochemistry results indicated that heterologous overexpression of the two genes enhanced the tolerance to Mn toxicity by reactivation of downstream genes in M. oryzae.

Application of Fungal Biomass for the Development of New Polylactic Acid-Based Biocomposites

Fungal biomass (FB), a by-product of the fermentation processes produced in large volumes, is a promising biomaterial that can be incorporated into poly(lactic acid) (PLA) to develop enhanced biocomposites that fully comply with the biobased circular economy concept. The PLA/FB composites, with the addition of triethyl citrate (TEC) as a biobased plasticizer, were fabricated by a microcompounder at 150 °C followed by injection molding. The effects of FB (10 and 20 wt %) and TEC (5, 10, and 15 wt %) contents on the mechanical, thermal and surface properties of the biocomposites were analyzed by several techniques. The PLA/FB/TEC composites showed a rough surface in their fracture section. A progressive decrease in tensile strength and Young’s modulus was observed with increasing FB and TEC, while elongation at break and impact strength started to increase. The neat PLA and biocomposite containing 10% FB and 15% TEC exhibited the lowest (3.84%) and highest (224%) elongation at break, respectively. For all blends containing FB, the glass transition, crystallization and melting temperatures were shifted toward lower values compared to the neat PLA. The incorporation of FB to PLA thus offers the possibility to overcome one of the main drawbacks of PLA, which is brittleness.

Effect of Fomes fomentarius Cultivation Conditions on Its Adsorption Performance for Anionic and Cationic Dyes

Lab-cultivated mycelia of Fomes fomentarius (FF), grown on a solid lignocellulose medium (FF-SM) and a liquid glucose medium (FF-LM), and naturally grown fruiting bodies (FF-FB) were studied as biosorbents for the removal of organic dyes methylene blue and Congo red (CR). Both the chemical and microstructural differences were revealed using X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, zeta potential analysis, and scanning electron microscopy, illuminating the superiority of FF-LM and FF-SM over FF-FB in dye adsorption. The adsorption process of CR on FF-LM and FF-SM is best described by the Redlich-Peterson model with β constants close to 1, that is, approaching the monolayer Langmuir model, which reach maximum adsorption capacities of 48.8 and 13.4 mg g-1, respectively, in neutral solutions. Adsorption kinetics follow the pseudo-second-order model where chemisorption is the rate-controlling step. While the desorption efficiencies were low, adsorption performances were preserved and even enhanced under simulated dye effluent conditions. The results suggest that F. fomentarius can be considered an attractive biosorbent in industrial wastewater treatment and that its cultivation conditions can be specifically tailored to tune its cell wall composition and adsorption performance.

Lignocellulose-Based Superabsorbent Polymer Gel Crosslinked with Magnesium Aluminum Silicate for Highly Removal of Zn (II) from Aqueous Solution

Lignocellulose (LCE) was ultrasonically treated and intercalated into magnesium aluminum silicate (MOT) clay to prepare a nano-lignocellulose magnesium aluminum silicate polymer gel (nano-LCE-MOT) for the removal of Zn (II) from aqueous solution. The product was characterised using nitrogen adsorption/desorption isotherm measurements, Fourier-transform infrared spectroscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The conditions for the adsorption of Zn (II) on nano-LCE-MOT were screened, and adsorption kinetics and isotherm model analysis were carried out to explore the adsorption mechanism and achieve the optimal adsorption of Zn (II). Optimal adsorption was achieved at an initial Zn (II) concentration of 800 mg/L at 60 °C in 160 min at a pH of 4.52. The adsorption kinetics were explored using a pseudo-second-order model, with the isotherm adsorption equilibrium found to conform to the Langmuir model. The maximum adsorption capacity of the nano-LCE-MOT polymer gel toward Zn (II) is 513.48 mg/g. The materials with adsorbed Zn (II) were desorbed using different media, with HCl found to be the most ideal medium to desorb Zn (II). The optimal desorption of Zn (II) was achieved in 0.08 mol/L HCl solution at 65 °C in 60 min. Under these conditions, Zn (II) was almost completely desorbed from the adsorbents, with the adsorption effect after cycling being slightly different from that of the initial adsorption.

Characterization of Novel Biopolymer Blend Mycocel from Plant Cellulose and Fungal Fibers

In this study unique blended biopolymer mycocel from naturally derived biomass was developed. Softwood Kraft (KF) or hemp (HF) cellulose fibers were mixed with fungal fibers (FF) in different ratios and the obtained materials were characterized regarding microstructure, air permeability, mechanical properties, and virus filtration efficiency. The fibers from screened Basidiomycota fungi Ganoderma applanatum (Ga), Fomes fomentarius (Ff), Agaricus bisporus (Ab), and Trametes versicolor (Tv) were applicable for blending with cellulose fibers. Fungi with trimitic hyphal system (Ga, Ff) in combinations with KF formed a microporous membrane with increased air permeability (>8820 mL/min) and limited mechanical strength (tensile index 9–14 Nm/g). HF combination with trimitic fungal hyphae formed a dense fibrillary net with low air permeability (77–115 mL/min) and higher strength 31–36 Nm/g. The hyphal bundles of monomitic fibers of Tv mycelium and Ab stipes made a tight structure with KF with increased strength (26–43 Nm/g) and limited air permeability (14–1630 mL/min). The blends KF FF (Ga) and KF FF (Tv) revealed relatively high virus filtration capacity: the log₁₀ virus titer reduction values (LRV) corresponded to 4.54 LRV and 2.12 LRV, respectively. Mycocel biopolymers are biodegradable and have potential to be used in water microfiltration, food packaging, and virus filtration membranes.