A sandwich-like chitosan-based antibacterial nanocomposite film with reduced graphene oxide immobilized silver nanoparticles

Chitosan nanoparticles loaded with royal jelly: Characterization, antioxidant, antibacterial activities and in vitro digestion

Nano-embedding has appeared as a feasible technology to improve the high-quality utilization of royal jelly (RJ). Therefore, the ionic gelation method was proposed to prepared chitosan nanoparticles loaded with royal jelly (RJNPs) and the characterization and biological activity of RJNPs were evaluated in this study. Fourier-transform infrared spectroscopy, differential scanning calorimetry and x-ray diffraction results showed that the methyl and methylene groups of royal jelly combine with the amino groups of chitosan (CS) to become an amorphous polymer. In addition, the 48.68 % encapsulation efficiency and 31.90 % loading capacity were obtained under the optimal ratio of 1:1 RJ to CS, and the average particle size was <80 nm. The antioxidant activity of RJNPs gradually increased with the increase of the RJ proportion. Interestingly, the antibacterial activity on gram-positive bacteria was better than gram-negative bacteria. Most important, RJNPs exhibited better stability and digestibility rather than single RJ. Overall, these findings indicated that RJ can be embedded in chitosan, and RJNPs exhibited good thermal stability, antioxidant activity, antibacterial activities and bioavailability, which was important for the development and application of the high-quality utilization of RJ.

The regulation of CuSNPs' interface for further enhancing mechanical and photothermal conversion properties of chitosan/@CuSNPs hybrid fibers

Our previous study has demonstrated that the microstructure of copper sulfide nanoparticles (CuSNPs) can be controlled to enhance mechanical and photothermal conversion properties of chitosan (CS)/CuSNPs hybrid fibers. However, achieving optimal dispersion and compatibility of CuSNPs within a CS matrix remains a challenge, this study aims to improve dispersion and compatibility by modifying the CuSNPs' interface, thereby enhancing mechanical and photothermal conversion properties of hybrid fibers. The interfaces of @CuSNPs (CuS@Xylan NPs, CuS@SA NPs, and CuS@PEG NPs) contain hydroxyl groups, facilitating the hydrogen bonds formation with the CS matrix. The dispersibility is further enhanced by the synergistic effect of xylan and SA's anionic charges with cationic chitosan. Notably, the viscosity of the CS/@CuSNPs hybrid spinning solution is significantly enhanced, resulting in improved breaking strength for initial hybrid fibers. Specifically, the breaking strength of CS/CuS@Xylan NPs hybrid fibers reaches 1.4 cN/dtex, exhibiting a 42.86 % and 20.6 % increase over CS and CS/CuSNPs hybrid fibers. Simultaneously, the CS/CuS@Xylan NPs hybrid fibers exhibit exceptional photothermal conversion performance, surpassing that of CS fibers by 5.2 times and CS/CuSNPs hybrid fibers by 1.4 times. The regulation of interface modification is an efficient approach to enhance the tensile strength and photothermal conversion properties of CS/CuSNPs hybrid fibers.

Therapeutic applications of carbohydrate-based compounds: a sweet solution for medical advancement

Carbohydrates, one of the most abundant biomolecules found in nature, have been seen traditionally as a dietary component of foods. Recent findings, however, have unveiled their medicinal potential in the form of carbohydrates-derived drugs. Their remarkable structural diversity, high optical purity, bioavailability, low toxicity and the presence of multiple functional groups have positioned them as a valuable scaffold and an exciting frontier in contemporary therapeutics. At present, more than 170 carbohydrates-based therapeutics have been granted approval by varying regulatory agencies such as United States Food and Drug Administration (FDA), Japan Pharmaceuticals and Medical Devices Agency (PMDA), Chinese National Medical Products Administration (NMPA), and the European Medicines Agency (EMA). This article explores an overview of the fascinating potential and impact of carbohydrate-derived compounds as pharmacological agents and drug delivery vehicles.

Efficient photocatalytic bactericidal performance of green-synthesised TiO2/reduced graphene oxide using banana peel extracts

In this study, the fabrication of titanium dioxide/reduced graphene oxide (TiO2/rGO) utilising banana peel extracts (Musa paradisiaca L.) as a reducing agent for the photoinactivation of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was explored. The GO synthesis was conducted using a modified Tour method, whereas the production of rGO involved banana peel extracts through a reflux method. The integration of TiO2 into rGO was achieved via a hydrothermal process. The successful synthesis of TiO2/rGO was verified through various analytical techniques, including X-ray diffraction (XRD), gas sorption analysis (GSA), Fourier-transform infrared (FT-IR) spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS), scanning electron microscope-energy dispersive X-ray (SEM-EDX) and transmission electron microscopy (TEM) analyses. The results indicated that the hydrothermal-assisted green synthesis effectively produced TiO2/rGO with a particle size of 60.5 nm. Compared with pure TiO2, TiO2/rGO demonstrated a reduced crystallite size (88.505 nm) and an enhanced surface area (22.664 m2/g). Moreover, TiO2/rGO featured a low direct bandgap energy (3.052 eV), leading to elevated electrical conductivity and superior photoconductivity. To evaluate the biological efficacy of TiO2/rGO, photoinactivation experiments targeting E. coli and S. aureus were conducted using the disc method. Sunlight irradiation emerged as the most effective catalyst, achieving optimal inactivation results within 6 and 4 h.

Nano-enabled antimicrobial thin films: design and mechanism of action

Antimicrobial thin films are types of protective coatings that are applied to surfaces such as medical devices, food packaging materials, water-resistant coatings, and other systems. These films prevent and reduce the spread of microbial organisms, including bacteria, fungi, and viruses. Antimicrobial thin films can be prepared from a variety of nanostructured materials including metal nanoparticles, metal oxides, plant materials, enzymes, bacteriocins and polymers. Their antimicrobial mechanism varies mostly based on the types of active agents from which the film is made of. Antimicrobial thin films are becoming increasingly popular microbial treatment methods due to their advantages such as enhanced stability, reduced toxicity levels, extended effectiveness over time and broad spectrum antimicrobial action without side effects on human health or the environment. This popularity and enhanced performance is mainly due to the extended possibility of film designs. Thin films offer convenient formulation methods which makes them suitable for commercial practices aiming at high turnover rates along with residential applications requiring frequent application cycles. This review focuses on recent developments in the possible processing methods and design approaches for assembling the various types of antimicrobial materials into nanostructured thin film-based delivery systems, along with mechanisms of action against microbes.

Advances in polysaccharides for probiotic delivery: Properties, methods, and applications

Probiotics are essential to improve the health of the host, whereas maintaining the viability of probiotics in harsh environments remains a challenge. Polysaccharides have non-toxicity, excellent biocompatibility, and outstanding biodegradability, which can protect probiotics by forming a physical barrier and show a promising prospect for probiotic delivery. In this review, we summarize polysaccharides commonly used for probiotic microencapsulation and introduce the microencapsulation technologies, including extrusion, emulsion, spray drying, freeze drying, and electrohydrodynamics. We discuss strategies for better protection of probiotics and introduce the applications of polysaccharides-encapsulated probiotics in functional food, oral formulation, and animal feed. Finally, we propose the challenges of polysaccharides-based delivery systems in industrial production and application. This review will help provide insight into the advances and challenges of polysaccharides in probiotic delivery.

Synergistic effect of graphene oxide/zinc oxide nanocomposites on polylactic acid-based active packaging film: Properties, release kinetics and antimicrobial efficiency

Incorporating two different nanoparticles in nanocomposite films is promising as their synergistic effects could significantly enhance polymer performance. Our previous work conferred the remarkable antimicrobial (AM) properties of the polylactic acid (PLA)-based film using optimal formulations of synergistic graphene oxide (GO)/zinc oxide (ZnO) nanocomposites. This study further explores the release profile of GO/ZnO nanocomposite and their impact on the antimicrobial properties. A fixed 1.11 wt% GO and different ZnO concentrations were well dispersed in the PLA matrix. Increasing ZnO concentrations tended to increase agglomeration, as evident in rougher surfaces. Agglomeration inhibited water penetration, leading to a significant reduction in water permeability (46.3 %), moisture content (31.6 %) but an improvement in Young's Modulus (52.6 %). The overall and specific migration of GO/ZnO nanocomposites was found to be within acceptable limits. It is inferred that the release of Zn2+ ions followed pseudo-Fickian behavior with an initial burst effect. AM film with the highest concentration of ZnO (1.25 wt%) exhibited the highest inhibition rate against Escherichia coli (68.0 %), Bacillus cereus (66.5 %), Saccharomyces cerevisiae (70.9 %). Results suggest that GO/ZnO nanocomposites with optimal ZnO concentrations have the potential to serve as promising antimicrobial food packaging materials, offering enhanced barrier, antimicrobial properties and a controlled release system.

One-step fabrication of eco-friendly multi-functional amphiphobic coatings for cellulose-based food packaging

Plastic and fluorine-containing oil and water resistant packaging materials have been gradually replaced by non-toxic and harmless bio-based materials because of their hazard to environment and human health. In this study, chitosan/carnauba wax emulsions (CS/CWs) were firstly prepared by one-step and used as oil and water resistant coating for cellulose-based food packaging paper. The impacts of emulsion components on stability of the emulsions and barrier performance of the coated paper were investigated. The results showed that the viscosity, particle size and polydispersity index of the emulsions were greatly dependent on the concentration of CS and CW, and the coated paper had the best comprehensive performance in water and oil resistance when the concentration of CS was 3 % and the amount of CW was 90 % of the total solid content (CS3/CW90). The particle size of CS3/CW90 was in the range of 0.5-0.7 μm, and the Cobb60 value, water contact angle and the kit ratings of paper coated with CS3/CW90 achieved 7.5 g/m2, 130.9° and 12/12, respectively, and the coated paper also exhibited excellent thermal stability and high antibacterial rate of 99.1 %, demonstrating its great potential for application in multi-functional food packaging.

Oxidized of chitosan with different molecular weights for potential antifungal and plant growth regulator applications

The application of Chitosan (CS) in drug delivery systems, plant growth promotion, antibacterial potentiality and plant defense is significantly limited by its inability to dissolve in neutral solutions. In this work, CS with different molecular weights (Mw) has been oxidized, yielding five kinds of oxidized chitosan (OCS 1-5) with solubilities in neutral solutions. The results obtained from Fourier Transform Infrared Spectroscopy clearly showed the successful oxidation of the hydroxyl group to form aldehyde and carboxyl groups. And the CS derivatives showed the wrinkled and lamellar structures on the surface of OCS. The results of antifungal activity against Fusarium graminearum showed that the OCS dissolved in 2 % (V/V) acetic acid exhibited better performance of almost complete inhibition of mycelial growth compared with CS at the concentration of 500 μg/mL. Among the five OCS, OCS-4 exhibited the best antifungal effect and had the lowest EC50 value of 581.68 μg/mL in samples. OCS-4 displayed superior promoting effect on seed germination with a germination potential of 62.2 % at a concentration of 3 g/L and a germination rate of 74.5 %. Additionally, the other four OCS also showed excellent antifungal activity with dose-dependent manners. These results indicated that the OCS had excellent antifungal potential in agricultural production.

Ag-lignin hybrid nanoparticles for high-performance solar absorption in photothermal antibacterial chitosan films

There is an urgent need for antimicrobial films based on sustainable resources and production methods. In this study, we present a bio-based nanocomposite film composed of chitosan (∼60 wt %), lignin nanoparticles (LNPs, ∼40 wt %), a small amount of glutaraldehyde (1.5 wt %), and a trace level of silver nanoparticles (AgNPs, 0.072 wt %). The uniform dispersion with LNPs prevented aggregation of metallic silver, resulting in small (diameter 3.3 nm) AgNPs. The nanocomposite film absorbs 89% of radiation across the entire solar spectrum and exhibits a remarkable photothermally triggered antibacterial effect, which is further enhanced by the dark color of lignin. Under simulated solar light illumination, the nanocomposite films demonstrated a significant reduction in viable Escherichia coli count compared to control scenarios. The potential applications of these nanocomposites extend to sunlight-activated antimicrobial films and coatings, addressing the growing demand for sustainable and effective antimicrobial materials.

Synthesis of chitosan based reduced graphene oxide-CeO2 nanocomposites for drug delivery and antibacterial applications

In this study, the unique characteristics of chitosan, reduced graphene oxide (rGO) and cerium oxide (CeO2) based hybrid bionano-composites make a carrier for various drug delivery and antimicrobial applications. The recent literatures shown that addition of biopolymers to rGO and CeO2 based nanocomposites exhibit excellent performance in design and development of biosensors, wound dressings, electrodes, microfluidic chips, drug delivery systems and energy storage applications. Chitosan (CS), reduced graphene oxide (rGO) mixed with cerium oxide (CeO2) to form CS-rGO and CS-rGO-CeO2 hybrid bionano-composites using precipitation method. The physiochemical characterization of casted nanocomposite sheet was done using FTIR, XRD, UV-Vis spectrum, SEM and TGA. The XRD results of CS-rGO-CeO2 revealed that the nanoparticle was found to be crystalline structure. FTIR revealed that nitrogen functionalities of CS interacted with rGO-CeO2 to form hybrid nanocomposites. The thermal gravimetric analysis (TGA) showed that the CS-rGO-CeO2 has better thermal stability up to 550 °C. The SEM confirms the surface morphology of CS-rGO-CeO2 has large surface area with smooth surface. Moreover, the antibacterial properties of nanocomposites exhibit excellent zone of inhibition against Staphylococcus aureus and Escherichia coli. The NIH3T3 cell line evaluations showed superior cell adhesion on hybrid nanocomposites. Hence bionano-composite based on CS, rGO and CeO2 are potential biomaterials for drug delivery and antibacterial applications.

Antibacterial nanocomposite of chitosan/silver nanocrystals/graphene oxide (ChAgG) development for its potential use in bioactive wound dressings

An adequate wound dressing reduces time of healing, provides cost-effective care, thereby improving patients' quality life. An antimicrobial bioactivity is always desired, for that reason, the objective of this work is to design an antimicrobial nanocomposite of chitosan/silver nanocrystals/graphene oxide (ChAgG). ChAgG nanostructured composite material is composed of chitosan from corn (Ch), and silver nanocrystals from garlic (Allium sativum). The nanocomposite obtained is the result of a series of experiments combining the graphene oxide (GrOx) with two members of the Amaryllidaceae family; garlic and onion (Allium cebae), which contain different sulfur materials. The characterization arrays confirmed the successful production of silver crystal, graphene oxidation and the blending of both components. The role of the chitosan as a binder between graphene and silver nanocrystals is proved. Moreover, the study discusses garlic as an optimal source that permits the synthesis of silver nanocrystals (AgNCs) (⁓ 2 to 10 nm) with better thermal and crystallinity properties. It was also confirmed the successful production of the ChAgG nanocomposite. Escherichia coli and Staphylococcus aureus were used to demonstrate the antibacterial bioactivity and L-929 fibroblast cells were utilized to visualize their biocompatibility. The proposed ChAgG nanomaterial will be useful for functionalizing specific fiber network that represents current challenging research in the fabrication of bioactive wound dressings.

Dialdehyde Cellulose Solution as Reducing Agent: Preparation of Uniform Silver Nanoparticles and In Situ Synthesis of Antibacterial Composite Films with High Barrier Properties

The demand for antimicrobial materials is gradually increasing due to the threat of infections and diseases caused by microorganisms. Silver nanoparticles (AgNPs) are widely used because of their broad-spectrum antimicrobial properties, but their synthesis methods are often environmentally harmful and AgNPs difficult to isolate, which limits their application in several fields. In this study, an aqueous solution of dialdehyde cellulose (DAC) was prepared and used as a reducing agent to synthesize AgNPs in an efficient and environmentally friendly process. The synthesized AgNPs can be easily separated from the reducing agent to expand their applications. In addition, the AgNPs were immobilized in situ on dialdehyde cellulose to form antibacterial composite films. The results showed that the prepared silver nanoparticles were mainly spherical and uniformly dispersed, with an average size of about 25 nm under optimal conditions. Moreover, the dialdehyde cellulose–nanosilver (DAC@Ag) composite films had excellent mechanical properties, positive transparency, ultraviolet-blocking properties, and effective antibacterial activity against E. coli and S. aureus. Notably, the composite films exhibited excellent oxygen and water vapor barrier properties, with WVT and ORT of 136.41 g/m2·24 h (30 °C, 75% RH) and <0.02 cm3/m2·24 h·0.1 MPa (30 °C, 75% RH), respectively, better than commercial PE films. Hence, this study not only provides an environmentally friendly method for the preparation of silver nanoparticles, but also offers a simple and novel strategy for the in situ synthesis of silver-loaded antibacterial composite films.

A robust carbon dot-based antibacterial CDs-PVA film as a wound dressing for antibiosis and wound healing

Developing highly effective antibacterial films to promote wound healing remains a huge challenge. Herein, homogeneous and self-standing CDs-PVA composite films (PVA₃, PVA₅ and PVA₈) were constructed by doping various mass ratios (3, 5 and 8 wt%) of carbon dots (CDs) into polyvinyl alcohol (PVA), which had no cracks or macroscopic defects. Moreover, the robust mechanical strength and flexibility enabled them to be cut into diverse patterns as required, which provided unique advantages for being employed as a wound dressing. PVA₅ and PVA₈ were powerful broad-spectrum bactericides and they could kill both Gram-negative bacteria and Gram-positive bacteria like Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) with the antibacterial efficacy over 90.0%. More significantly, the biocompatible films could be readily processed into a "band-aid" type dressing for wound healing. The PVA₅ band-aids were just pasted on the wounds for two days and then removed, and the wounds were completely closed after fourteen days. Neither introducing any metals or antibiotics, nor with the help of any external activation, these kinds of CD-based films have the strengths of low cost, being easy to use, excellent biocompatibility and outstanding antibacterial performance, and are desirable wound dressings for various skin injuries.

MSCs-laden silk Fibroin/GelMA hydrogels with incorporation of platelet-rich plasma for chondrogenic construct

Repair of osteochondral defects and regeneration of cartilage is a major challenge. In this work, the mesenchymal stem cells (MSCs)-laden hydrogel was designed using silk fibroin (SF) and gelatin methacrylate (GelMA), to encapsulate platelet-rich plasma (PRP). Initially, GelMA was synthesized, and SF was prepared using silkworm cocoon, then MSCs-laden SF/GelMA (SG) hydrogel was fabricated. The physicochemical properties of the hydrogels were evaluated using Fourier-transform infrared spectroscopy, scanning electron microscope, and rheometry. After hydrogel preparation, the viability of MSCs in the hydrogels was investigated via CCK-8 analysis and fluorescent images. The MSCs-laden SG hydrogel containing PRP was subsequently injected into the cartilage defect area in Sprague Dawley rats. Hematoxylin and eosin (H&E), Masson staining, and Mankin scores evaluation confirmed the new cartilage formation in 8 weeks. The results presented in the study, therefore, showed that the prepared MSCs-laden SG hydrogel loaded with PRP has the potential for cartilage reconstruction, which is crucial to the treatment of knee osteoarthritis.

Enhanced antibacterial effect and biodegradation of coating via dual-in-situ growth based on carboxymethyl cellulose

The lack of antimicrobial effect of commercial paper coating for food packaging makes it difficult to prevent food spoilage and harms the environment by non-biodegradation. Herein, carboxymethyl cellulose (CMC) provides negatively charged sites for anchoring Ag⁺ and Zn²⁺ to grow AgNPs and ZIF-8 in situ on its molecular chains. The ZIF-8/AgNPs@CMC paper coating has excellent synergistic antibacterial activity to prolong the shelf-life of food. It not only has good thermal stability but binds closely to the paper and its adhesion force reaches 628.9 nN. Besides, the ZIF-8/AgNPs@CMC coated paper has better mechanical properties, water vapor barrier, and resists water solubility. Interestingly, due to the confinement effect of ZIF-8, the cumulative release of AgNPs after 168 h is only 2.66 % to avoid possible food safety risks. Especially, the coating can be almost biodegraded in the soil after 30 days, which provides the possibility to replace the non-biodegradable coatings in food packaging.

Enzymatically crosslinked hydrogel based on tyramine modified gelatin and sialylated chitosan

The enzymatically crosslinked hydrogel could replicate the cellular microenvironment for biomedical applications. In the present study, to improve the cytocompatibility of chitosan (CS), sialic acid (SA) was introduced to CS to synthesize sialylated CS (CS-SA), and the tyramine (TA) was grafted to gelatin (G) to obtain TA modified gelatin (G-TA). The successful synthesis of CS-SA and G-TA was confirmed using¹H NMR and UV-Vis absorption spectra. The interpenetrating polymer networks G-TA/CS-SA (GC) hydrogel was then fabricated via blending G-TA and CS-SA solutions and crosslinked using horseradish peroxidase. The storage modulus (G') of the fabricated GC hydrogels with different ratios of G-TA/CS-SA greatly varied during the formation and strain of hydrogels. With the increase of CS-SA concentration from 0% to 2%, the storage modulus of GC hydrogels was also observed to decrease from 1500 Pa to 101 Pa; the water uptake capacity of GC hydrogels increased from 1000% to 4500%. Additionally, the cell counting kit-8 and fluorescent images demonstrated the excellent cytocompatibility of GC hydrogels after culturing with NIH 3T3 cells. The obtained results indicated that the fabricated GC hydrogels might have potential in biomedical fields, such as wound dressing.

Chitosan-Based Formulations Intended as Protective Spray for Mask Surfaces in Prevention of Coronavirus Dissemination

The extraordinary occurrence of COVID-19 by the fast expansion of viral infections has propelled particular interest in developing novel antiviral and virucidal agents to guarantee personal security. The main objective of this work is to propose novel formulations able to optimize the use of personal protection elements. In recent years, chitosan (CH) has attracted attention for being an interesting multifunctional, biodegradable, non-antigenic, non-toxic, and biocompatible natural polymer with antimicrobial properties. In this work, formulations based on a CH matrix containing silver, and Copper based nanoparticles have been developed. The novelty of this proposal is that almost liquid formulations have been reached, possessing verified properties to inhibit evolved virus such as herpes simplex type 1 (HSV-1) and bovine betacoronavirus (BCoV), the latter belonging to the same family of the well-known the well-known SARS-CoV-2. Besides antibacterial bioactivity; as well as the ability of these formulations to be easily sprayed on various surfaces, including conventional face masks, have been verified and discussed. The results presented in this contribution provide strong evidence on CH films as an ideal biosafe surface-protective for several daily used materials including the conventional face masks.

Recent advances in biobased and biodegradable polymer nanocomposites, nanoparticles, and natural antioxidants for antibacterial and antioxidant food packaging applications

Inorganic nanoparticles (NPs) and natural antioxidant compounds are an emerging trend in the food industry. Incorporating these substances in biobased and biodegradable matrices as polysaccharides (e.g., starch, cellulose, and chitosan) and proteins has highlighted the potential in active food packaging applications due to more significant antimicrobial, antioxidant, UV blocking, oxygen scavenging, water vapor permeability effects, and low environmental impact. In recent years, the migration of metal NPs and metal oxides in food contact packaging and their toxicological potential have raised concerns about the safety of the nanomaterials. In this review, we provide a comprehensive overview of the main biobased and biodegradable polymer nanocomposites, inorganic NPs, natural antioxidants, and their potential use in active food packaging. The intrinsic properties of NPs and natural antioxidant actives in packaging materials are evaluated to extend shelf-life, safety, and food quality. Toxicological and safety aspects of inorganic NPs are highlighted to understand the current controversy on applying some nanomaterials in food packaging. The synergism of inorganic NPs and plant-derived natural antioxidant actives (e.g., vitamins, polyphenols, and carotenoids) and essential oils (EOs) potentiated the antibacterial and antioxidant properties of biodegradable nanocomposite films. Biodegradable packaging films based on green NPs-this is biosynthesized from plant extracts-showed suitable mechanical and barrier properties and had a lower environmental impact and offered efficient food protection. Furthermore, AgNPs and TiO₂ NPs released metal ions from packaging into contents insufficiently to cause harm to human cells, which could be helpful to understanding critical gaps and provide progress in the packaging field.

Fe(iii) and Cr(vi) ions' removal using AgNPs/GO/chitosan nanocomposite as an adsorbent for wastewater treatment

Heavy metal ions in water refer to significant risks to the biological system due to their high toxicity. Therefore, the decontamination of water polluted by heavy metal ions attracts significant interest of researchers. Adsorption by nanomaterials has been a widely used technique for removing heavy metal ions from water. Chitosan was extracted from shrimp shellfish and mixed with laboratory-prepared AgNPs/GO in the ratio of 3 : 1. A series of tests evaluates the best condition of pH, amount of adsorbent, retention time, stirring speed, temp, and initial concentration. The research was conducted under various conditions. Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich isotherms were also tested. Also, the column adsorption experiment was carried out on industrial wastewater at different flow rates and column bed heights. The optimal values of the contact time, pH, and adsorbent dose of Cr(vi) were found to be 80 min, 4, and 0.1 g 100 mL⁻¹, respectively, at room temperature (30 °C), agitation at 150 rpm, and initial concentration of 50 ppm. On the other hand, the optimal value of contact time, pH, and adsorbent dose of Fe(iii) were found to be 30 min, 6, and 0.02 g 100 mL⁻¹, respectively, at room temp (30 °C) with a stirring speed of 250 rpm and an initial concentration of 40 ppm. For Cr(vi) and Fe(iii), equilibrium studies show that the data fit the Freundlich isotherm well (correlation coefficient, R² = 0.98) (III). A link between the pseudo-second order active model and data fitting the pseudo-first order active models were made. Within the intraparticle diffusion model, there are four stages that the mechanism must go through before it is at equilibrium. The adsorbent was tested in an industrial adsorbent column. This test proves that the nanocomposite's adsorption capacity can be restored by washing it with 0.1 M HCl, as shown by the periodicity test. After four cycles, the amount of Cr(vi) adsorbed on AgNPs/GO/chitosan was just 20%, which is insufficient for further adsorption experiments. Cr(vi) removal rates (%R) decreased slightly.

Steps of AgNPs/GO/chitosan nanocomposite preparation.

Recent development in antibacterial activity and application of nanozymes in food preservation

Nanozymes with excellent broad-spectrum antibacterial properties offers an alternative strategy for food preservation. This review comprehensively summarized the antibacterial mechanisms of nanozymes, including the generation of reactive oxygen species (ROS) and the destruction of biofilms. Besides, the primary factors (size, morphology, hybridization, light, etc.) regulating the antibacterial activity of different types of nanozymes were highlighted in detail, which provided effective guidance on how to design highly efficient antibacterial nanozymes. Moreover, this review presented elaborated viewpoints on the unique applications of nanozymes in food preservation, including the selection of nanozymes loading matrix, fabrication techniques of nanozymes-based antibacterial films/coatings, and the recent advances in the application of nanozymes-based antibacterial films/coatings in food preservation. In the end, the safety issues of nanozymes have also been mentioned. Overall, this review provided new avenues in the field of food preservation and displayed great prospects.

Potential Impact of Reduced Graphene Oxide Incorporated Metal Oxide Nanocomposites as Antimicrobial, and Antibiofilm Agents Against Pathogenic Microbes: Bacterial Protein Leakage Reaction Mechanism

In the current study, nanocomposites-based reduced graphene oxide (RGO) and metal oxides (AgO, NiO, and ZnO) were fabricated. The starting precursor and RGO were characterized by XRD, Raman, SEM, and HRTEM, while SEM and EDX mapping validated the synthesized nanocomposites. In addition, ZOI, MIC, antibiofilm, and growth curve were tested. The antimicrobial reaction mechanism was investigated by protein leakage assay and SEM imaging. Results revealed that all synthesized nanocomposites (RGO-AgO, RGO-NiO, and RGO-ZnO) have outstanding antimicrobial activity against pathogenic bacteria and unicellular fungi. Moreover, RGO-AgO, RGO-NiO, and RGO-ZnO nanocomposites exhibited an antibiofilm activity percentage against Staphylococcus aureus (91.72%), Candida albicans  (91.17%), and Escherichia coli (90.36%). The SEM analysis of S. aureus after RGO-AgO treatment indicated morphological differences, including the whole lysis of the outer surface supported by deformations of the bacterial cells. It was observed that the quantity of cellular protein leakage from S. aureus is directly proportional to the concentration of RGO-AgO, RGO-NiO, and RGO-ZnO nanocomposites and found to be 260.25 µg/mL, 110.55 µg/mL, and 99.90 µg/mL, respectively. The prepared nanocomposites promise to treat resistant microbes as a new strategy for managing infectious diseases.

Fabrication of Zein/Mesona chinensis Polysaccharide Nanoparticles: Physical Characteristics and Delivery of Quercetin

Polysaccharides are considered to be highly stable, nontoxic, hydrophilic, biodegradable, and biocompatible, coupled with the diverse chemical functions they contain, making them promising biomaterials for the development of nutrient delivery systems. In this study, we prepared zein-Mesona chinensis polysaccharide (MCP) nanoparticles by antisolvent precipitation. Zien and MCP self-assembly formed smooth spherical nanoparticles (Z-M NPs) under hydrophobic, hydrogen bonding, and electrostatic interactions. Results showed that MCP concentration (0% to 0.2%), pH (3 to 7), and addition sequence have a great effect on the particle size (165 to 463 nm), potential (-18.46 to -38.6 mV), and rheological properties of Z-M NPs. Moreover, Z-M NPs had good redispersibility and favorable encapsulation efficiency (92.8%) for quercetin. Compared with free quercetin, quercetin-loaded Z-M NPs significantly downregulated the expression of NO, TNF-α, IL-1β, and IL-6 in RAW264.7 induced by lipopolysaccharide, which resulted in higher in vitro anti-inflammatory activity. Therefore, Z-M NPs have the potential to be applied to encapsulate hydrophobic natural phytochemicals as food-based functional biomaterials.

A review of multilayer and composite films and coatings for active biodegradable packaging

Active biodegradable packaging are being developed from biodegradable biopolymers which may solve the environmental problems caused by petroleum-based materials (plastics), as well as improving the shelf life, quality, nutritional profile, and safety of packaged food. The functional performance of active ingredients in biodegradable packaging can be extended by controlling their release profiles. This can be achieved by incorporating active ingredients in sandwich-structured packaging including multilayer and composite packaging. In multilayer materials, the release profile can be controlled by altering the type, structure, and thickness of the different layers. In composite materials, the release profile can be manipulated by altering the interactions of active ingredients with the surrounding biopolymer matrix. This article reviews the preparation, properties, and applications of multilayer and composite packaging for controlling the release of active ingredients. Besides, the basic theory of controlled release is also elaborated, including diffusion, swelling, and biodegradation. Mathematical models are presented to describe and predict the controlled release of active ingredients from thin films, which may help researchers design packaging materials with improved functional performance.

In Situ Stabilisation of Silver Nanoparticles at Chitosan-Functionalised Graphene Oxide for Reduction of 2,4-Dinitrophenol in Water

This investigation reports the in situ growth of silver nanoparticles onto covalently bonded graphene oxide-chitosan, which serve as supported nanocatalysts for the NaBH4 reduction of 2,4-dinitrophenol in aqueous systems. Fumaryl chloride reacted with chitosan in an acidic environment to yield a tailored polymeric material. The latter was, in turn, treated with the pre-synthesised graphene oxide sheets under acidic conditions to generate the GO-functionalised membrane (GO-FL-CS). The adsorption of Ag+ from aqueous media by GO-FL-CS yielded a set of membranes that were decorated with silver nanoparticles (Ag NPs@GO-FL-CS) without any reducing agent. Various analytical tools were used to characterise these composites, including Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller surface area analysis, X-ray diffraction, scanning electron microscopy/energy-dispersive X-ray analysis, inductively coupled plasma-mass spectrometry, and transmission electron microscopy. The silver-loaded materials were further used for the remediation of 2,4-dinitrophenol from aqueous solutions under batch operation. The BET analysis revealed that the functionalisation of GO with chitosan and Ag NPs (average size 20-60 nm) resulted in a three-fold increased surface area. The optimised catalyst (Ag mass loading 16.95%) displayed remarkable activity with an apparent pseudo-first-order rate constant of 13.5 × 10-3 min-1. The cyclic voltammetry experiment was conducted to determine the nitro-conversion pathway. The reusability/stability test showed no significant reduction efficiency of this metal-laden composite over six cycles. Findings from the study revealed that Ag NPs@GO-FL-CS could be employed as a low-cost and recyclable catalyst to convert toxic nitroaromatics in wastewater.

A dual-functional layer modified GO@SiO2 membrane with excellent anti-fouling performance for continuous separation of oil-in-water emulsion

As the most significant target of membrane separation, the inadequacy of permeability and anti-fouling frequently constrain the application of the membrane in actual oily wastewater. Herein, a novel concept of membrane surface construction was proposed to mitigate this intractable problem, using SiO₂ as the support layer and graphene oxide (GO) as the isolation layer. The best co-localization proportion of the support layer (56 mg/L) and isolation layer (3.5 mg/L) was determined by the separation performance of the modified membranes for the simulated emulsion. The thin GO layer could effectively prevent contaminants from entering the membrane pores without affecting its roughness. Based on the synergistic action of the isolation layer and support layer, the GO@SiO₂ membrane could well implement emulsion purification with a stable permeability (654.11 LMHB) and high separation efficiency (99.41%). The superior anti-fouling performance of the membrane ensures its long-term cycling stability, with the permeability recovery rate of 89.75% (low-density oil) and 90.41% (high-density oil) after 10 repeated cycles. The storage stability also indirectly increases its value in practical applications. More importantly, the GO@SiO₂ membrane also shows great potential for industrial emulsion treatment with excellent purification and cycling stability (permeability recovery rate of 84.01%).

Polysaccharide-Based Nanocomposites for Food Packaging Applications

The article presents a review of the literature on the use of polysaccharide bionanocomposites in the context of their potential use as food packaging materials. Composites of this type consist of at least two phases, of which the outer phase is a polysaccharide, and the inner phase (dispersed phase) is an enhancing agent with a particle size of 1-100 nm in at least one dimension. The literature review was carried out using data from the Web of Science database using VosViewer, free software for scientometric analysis. Source analysis concluded that polysaccharides such as chitosan, cellulose, and starch are widely used in food packaging applications, as are reinforcing agents such as silver nanoparticles and cellulose nanostructures (e.g., cellulose nanocrystals and nanocellulose). The addition of reinforcing agents improves the thermal and mechanical stability of the polysaccharide films and nanocomposites. Here we highlighted the nanocomposites containing silver nanoparticles, which exhibited antimicrobial properties. Finally, it can be concluded that polysaccharide-based nanocomposites have sufficient properties to be tested as food packaging materials in a wide spectrum of applications.