Pullulanase modification of granular sweet potato starch: Assistant effect of dielectric barrier discharge plasma on multi-scale structure, physicochemical properties

Dielectric barrier discharge plasma pre-treatment to facilitate the acetylation process of corn starch under heating/cooling cycles

The objective of the current work was to evaluate the impacts of dielectric barrier discharge plasma and repeated dry-heat treatments on the acetylation process of corn starch. The combined modification resulted in a higher substitution degree of acetate groups on starch chains compared to the acetylation treatment alone. This outcome was linked to the increase in surface area and structural organization level of granules achieved through the application of plasma and heating/cooling cycles, respectively. The successful esterification of starch structure was verified through FTIR (1710 cm-1) and 1H NMR (2 ppm). With the increase in plasma treatment duration up to 20 min, gelatinization enthalpy increased (10.81 J/g) due to the cross-linking reaction. Starch acetate produced through the combined treatment could find the application in the development of low-calorie food formulations due to its high resistant starch (70.5 g/100 g) and low viscosity (43 mPa s).

The effect of cold plasma on starch: Structure and performance

The inherent side effects of the physico-chemical properties of native starches often severely limit their use in food and non-food industries. Plasma is a non-thermal technology that allows rapid improvement of functional properties. This review provides a comprehensive summary of the sources and mechanisms of action of cold plasma and assesses its effects on starch morphology, crystal structure, molecular chain structure and physicochemical properties. The complex relationship between structure and function of plasma-treated starch is also explored. Potential applications of plasma-modified starch are also discussed in detail. The outcome of the modification process is influenced by factors such as starch type and concentration, plasma source, intensity and duration. The properties of starch can be effectively optimised using plasma technology. Plasma-based technologies therefore have the potential to modify starch to create a range of functionalities to meet the growing market demand for clean label ingredients.

The Effect of Maltose on Structural, Physicochemical, and Digestive Properties of Lentil Starch under Electron Beam Irradiation

This study investigated the effects of electron beam irradiation (EBI) on the structural, physicochemical, and functional properties of lentil starch with varying maltose content. EBI did not significantly disrupt the starch's surface structure or cause amorphization of starch and maltose crystals, but it significantly reduced the intensity of starch's XRD peaks. The presence of maltose intensified internal growth ring damage, leading to more cross-link and rearrangement between short chains, improving short-range ordering of lentil starch and enhancing starch's solubility and thermal stability. Additionally, adding maltose that EBI then treats can lead to an increased content of slowly digestible starch in samples.

Effect of amylose partial extraction on citrate esterification of potato starch and its role in structure and physicochemical modification

This study examines the impact and influence of amylose on the starch esterification reaction through partial extraction of amylose. Citric acid was added for the esterification reaction, and then the esterified starches' multiscale structure, physicochemical, and functional properties were evaluated. As the extraction time of amylose increased, the amylose content in the starch decreased. Higher concentrations of citric acid will lead to samples with a higher degree of substitution, with DS rising from 0.203 % (0 h) to 0.231 % (3.5 h) at CA3 treatment. While removing amylose had minimal effects on the crystal structure of starch granules, it did decrease the ratio of A and B1 chains and the molecular weight of amylose. Acid hydrolysis exacerbated these changes upon the addition of citric acid. Furthermore, removing amylose followed by citrate esterification resulted in lower pasting viscosity, enthalpy of gelatinization (from 13.37 J to 2.83 J), and degree of short-range ordering. Also, digestion shows a decrease caused by the increasing content of slow-digesting starch. The presence of amylose in starch granules does affect the formation of starch esters, and removing it before esterification modification may improve production efficiency and reduce costs to some extent.

Engineering hyperthermophilic pullulanase to efficiently utilize corn starch for production of maltooligosaccharides and glucose

Pullulanase is a starch-debranching enzyme that hydrolyzes side chain of starch, oligosaccharides and pullulan. Nevertheless, the limited activities of pullulanases constrain their practical application. Herein, the hyperthermophilic type II pullulanase from Pyrococcus yayanosii CH1 (PulPY2) was evolved by synergistically engineering the substrate-binding pocket and active-site lids. The resulting mutant PulPY2-M2 exhibited 5-fold improvement in catalytic efficiency (kcat/Km) compared to that of PulPY2. PulPY2-M2 was utilized to develop a one-pot reaction system for efficient production of maltooligosaccharides. The maltooligosaccharides conversion rate of PulPY2-M2 reached 96.1%, which was increased by 5.4% compared to that of PulPY2. Furthermore, when employed for glucose production, the glucose productivity of PulPY2-M2 was 25.4% and 43.5% higher than that of PulPY2 and the traditional method, respectively. These significant improvements in maltooligosaccharides and glucose production and the efficient utilization of corn starch demonstrated the potential of the engineered PulPY2-M2 in starch sugar industry.

Two-step modification of pullulanase and transglucosidase: A novel way to improve the gel strength and reduce the digestibility of rice starch

The multiscale structure, gel strength and digestibility of rice starch modified by the two-step modification of pullulanase (PUL) pretreatment and transglucosidase (TG) treatment for 6, 12, 18 and 24 h were investigated. The debranching hydrolysis of PUL produced some linear chains, which rearranged to form stable crystalline structures, reducing the digestible starch content, but weakening the gel strength. TG treatment connected some short chains to longer linear chains via α-1,6-glycosidic bonds, generating the structures of linear chain with fewer branches. The short branches promoted the interaction between starch molecules to form a more compact three-dimensional gel network structure, showing higher hardness and springiness. Moreover, these chains could form more stable crystals, reducing the digestible starch content, and the increase of branching degree inhibited digestive enzyme hydrolysis, reducing the digestion rate. The multiscale structure of starch tended to stabilize after TG treatment for 18 h, which could form a gel with stronger strength and lower digestibility than native starch gel. Therefore, the two-step modification of PUL and TG was an effective way to change the structure of rice starch to improve the gel strength and reduce the digestibility.

Physicochemical properties and in vitro digestibility of ginseng starches under citric acid-autoclaving treatment

In this study, the effects of citric acid-autoclaving (CA-A) treatment on physicochemical and digestive properties of the native ginseng starches were investigated. The results showed that ginseng starch exhibited a B-type crystal structure with a low onset pasting temperature of 44.23 ± 0.80 °C, but high peak viscosity and setback viscosity of 5897.34 ± 53.72 cP and 692.00 ± 32.36 cP, respectively. The granular morphology, crystal and short-range ordered structure of ginseng starches were destroyed after CA-A treatment. The more short-chain starches were produced, resulting in the ginseng starches solubility increased. In addition, autoclaving, citric acid (CA) and CA-A treatment promoted polymerization and recrystallization of starch molecules, increased the proportion of amylopectin B1, and B3 chains, and improved molecular weight and resistant starch (RS) content of ginseng starches. The most significant multi-scale structural change was induced by CA-A treatment, which reduced the relative crystallinity of ginseng starch from 28.26 ± 0.24 % to 2.75 ± 0.08 %, and increased the content of RS to 54.30 ± 0.14 %. These findings provided a better understanding of the structure and properties of Chinese ginseng starches and offered new ideas for the deep processing of ginseng foods.

Dielectric barrier discharge cold plasma modifies the multiscale structure and functional properties of banana starch

Banana starch has attracted significant attention due to its abundant content of resistant starch. This study aims to compare the multiscale structure and functional properties of banana starch obtained from five cultivated varieties and investigate the impact of dielectric barrier discharge cold plasma (DBD) treatment on these starch characteristics. All five types of natural banana starch exhibited an elliptical and irregular shape, conforming to the CB crystal structure, with a bimodal distribution of branch chain lengths. The resistant starch content ranged from 88.9 % to 94.1 %. Variations in the amylose content, amylopectin branch chain length distribution, and structural characteristics resulted in differences in properties such as gelatinization behavior and sensitivity to DBD treatment. The DBD treatment inflicted surface damage on starch granules, reduced the amylose content, shortened the amylopectin branch chain length, and changed the relative crystallinity to varying degrees. The DBD treatment significantly increased starch solubility and light transmittance. Simultaneously, it resulted in a noteworthy decrease in peak viscosity and gelatinization enthalpy of starch paste. The in vitro digestibility test showed that 76.2 %-86.5 % of resistant starch was retained after DBD treatment. The DBD treatment renders banana starch with reduced viscosity, increased paste transparency, enhanced solubility, and broadens its potential application.

Banana starch modified by heat moisture treatment and annealing: Study on digestion kinetics and enzyme affinity

Starch modification by annealing (ANN) and heat-moisture treatment (HMT) results in a lower crystallinity compared to native but the change of B crystalline type to A type is only observed in HMT starch. All starches possess two different digestion rate constants i.e. k1 (at rapid phase) and k2 (at slow phase) which may be linked to the preserved intact starch granule following thermal treatment. HMT starch contains higher content of slowly digestible starch (C2∞) compared to the C2∞ of the other starches. The lower enzyme binding to HMT starch (Kd value increases from 0.12 mg/mL in native starch to 0.83 mg/mL) may be linked to the increase in the degree of ordered structure of the granule surface (observed from the absorption band ratio of 1000 cm-1/1022 cm-1). The lower affinity may lead to a lower k1 value. This holds true for ANN and native starch which displays similar k1, Kd value and degree of ordered to disordered structure. Lower k2 in HMT starch compared to the corresponding k2 in the other starches may be linked to the slower enzyme diffusion into the core of starch granule due to the tightly packed structure of A crystalline type in HMT starch.

The multi-scale structure changes of γ-ray irradiated potato starch to mitigate pasting/digestion properties

The comprehensive understanding of multi-scale structure of starch and how the structure regulates the pasting/digestion properties remain unclear. This work investigated the effects of γ-ray irradiation with different doses on multi-scale structure and pasting/digestion properties of potato starch. Results indicated that γ-ray at lower doses (<20 kGy) had little effect on micromorphology of starch, increased mainly the amylose content and the thickness of amorphous region while decreased crystallinity, double helix content and lamellar ordering. With the increase of dose, the internal structure of large granules was destroyed, resulting in the depolymerization of starch to form more short-chains and to reduce molecular weight. Meanwhile, amylose content decreased due to the depolymerization of amylose. The enhanced double helix content, crystallinity, lamellar ordering and structural compactness manifested the formation of the thicker and denser starch structure. These structure changes resulted in the decreased viscosity, the increased stability and anti- digestibility of paste.

Effect of high voltage dielectric barrier discharge (DBD) atmospheric cold plasma treatment on physicochemical and functional properties of taro (Colocasia esculenta) starch

The goal of the proposed study is to investigate the effects of three different power levels (30, 32 and 34 kV) and exposure time (2, 4 and 8 min) of dielectric barrier discharge (DBD) atmospheric cold plasma treatment on the functional and physicochemical characteristics of taro starch. Investigations were done into how different treatments impact the multi-structural, functional and physicochemical attributes of taro starch. The findings showed that cold plasma treatments substantially impacted starch granule shapes (3.60-2.54 μm), such as reduced aggregations and developed fissures on granule surface due to the generation of an etching by plasma species and enhancement in the surface topography and roughness of treated starch as compared with native by SEM and AFM analysis. Besides this, no variations were detected in the functional groups of taro starch using FT-IR analysis after cold plasma treatments. However, the A-type pattern in the XRD did not affect it, while a reduction in relative crystallinity (14.20-11.50 %) was seen as a function of the active plasma species depolymerization. Furthermore, depending on the cold plasma voltage and treatment time, amylose content (20.12-15.98 %), paste clarity (24.48-31.27 %), solubility (0.41-65.53 %), freezing thaw stability (% syneresis) (32.10-42.58 %), color properties (L*, 94.79-97.52), whiteness index (79.37-84.66), molecular weight distribution (Peak 1, 12.79-5.35 × 108 g/mol; Peak 2, 4.20-1.56 × 107 g/mol) and in vitro digestibility (RDS, 64.10-64.08 %) significantly changed. So, based on these excellent properties, this study suggested that cold plasm-treated taro starch can be used in the field of food packaging material, functional food and pharmaceutical products. Therefore, a potential approach for physically altering starch is plasma treatment.

Comprehensive review on single and dual modification of starch: Methods, properties and applications

Starch is a natural, renewable, affordable, and easily available polymer used as gelling agents, thickeners, binders, and potential raw materials in various food products. Due to these techno-functional properties of starch, food and non-food industries are showing interest in developing starch-based food products such as films, hydrogels, starch nanoparticles, and many more. However, the application of native starch is limited due to its shortcomings. To overcome these problems, modification of starch is necessary. Various single and dual modification processes are used to improve techno-functional, morphological, and microstructural properties, film-forming capacity, and resistant starch. This review paper provides a comprehensive and critical understanding of physical, chemical, enzymatic, and dual modifications (combination of any two single modifications), the effects of parameters on modification, and their applications. The sequence of modification plays a key role in the dual modification process. All single modification methods modify the physicochemical properties, crystallinity, and emulsion properties, but some shortcomings such as lower thermal, acidic, and shear stability limit their application in industries. Dual modification has been introduced to overcome these limitations and maximize the effectiveness of single modification.

A review of starch swelling behavior: Its mechanism, determination methods, influencing factors, and influence on food quality

Swelling behavior involves the process of starch granules absorbing enough water to swell and increase the viscosity of starch suspension under hydrothermal conditions, making it one of the important aspects in starch research. The changes that starch granules undergo during the swelling process are important factors in predicting their functional properties in food processing. However, the factors that affect starch swelling and how swelling, in turn, affects the texture and digestion characteristics of starch-based foods have not been systematically summarized. Compared to its long chains, the short chains of amylose easily interact with amylopectin chains to inhibit starch swelling. Generally, reducing the swelling of starch could increase the strength of the gel while limiting the accessibility of digestive enzymes to starch chains, resulting in a reduction in starch digestibility. This article aims to conduct a comprehensive review of the mechanism of starch swelling, its influencing factors, and the relationship between swelling and the pasting, gelling, and digestion characteristics of starch. The role of starch swelling in the edible quality and nutritional characteristics of starch-based foods is also discussed, and future research directions for starch swelling are proposed.

Modulating the glycemic response of starch-based foods using organic nanomaterials: strategies and opportunities

Traditionally, diverse natural bioactive compounds (polyphenols, proteins, fatty acids, dietary fibers) are used as inhibitors of starch digestive enzymes for lowering glycemic index (GI) and preventing type 2 diabetes mellitus (T2DM). In recent years, organic nanomaterials (ONMs) have drawn a great attention because of their ability to overcome the stability and solubility issues of bioactive. This review aimed to elucidate the implications of ONMs in lowering GI and as encapsulating agents of enzymes inhibitors. The major ONMs are presented. The mechanisms underlying the inhibition of enzymes, the stability within the gastrointestinal tract (GIT) and safety of ONMs are also provided. As a result of encapsulation of bioactive in ONMs, a more pronounced inhibition of enzymes was observed compared to un-encapsulated bioactive. More importantly, the lower the size of ONMs, the higher their inhibitory effects due to facile binding with enzymes. Additionally, in vivo studies exhibited the potentiality of ONMs for protection and sustained release of insulin for GI management. Overall, regulating the GI using ONMs could be a safe, robust and viable alternative compared to synthetic drugs (acarbose and voglibose) and un-encapsulated bioactive. Future researches should prioritize ONMs in real food products and evaluate their safety on a case-by-case basis.

Characterization of Spray-Dried Microcapsules of Paprika Oleoresin Induced by Ultrasound and High-Pressure Homogenization: Physicochemical Properties and Storage Stability

As an indispensable process in the microencapsulation of active substances, emulsion preparation has a significant impact on microencapsulated products. In this study, five primary emulsions of paprika oleoresin (PO, the natural colourant extracted from the fruit peel of Capsicum annuum L.) with different particle sizes (255-901.7 nm) were prepared using three industrialized pulverization-inducing techniques (stirring, ultrasound induction, and high-pressure homogenization). Subsequently, the PO emulsion was microencapsulated via spray drying. The effects of the different induction methods on the physicochemical properties, digestive behaviour, antioxidant activity, and storage stability of PO microencapsulated powder were investigated. The results showed that ultrasound and high-pressure homogenization induction could improve the encapsulation efficiency, solubility, and rehydration capacity of the microcapsules. In vitro digestion studies showed that ultrasound and high-pressure homogenization induction significantly increased the apparent solubility and dissolution of the microcapsules. High-pressure homogenization induction significantly improved the antioxidant capacity of the microcapsules, while high-intensity ultrasound (600 W) induction slowed down the degradation of the microcapsule fats and oils under short-term UV and long-term natural light exposure. Our study showed that ultrasound and high-pressure homogenization equipment could successfully be used to prepare emulsions containing nanoscale capsicum oil resin particles, improve their functional properties, and enhance the oral bioavailability of this bioactive product.

Hierarchical structural modification of starch via non-thermal plasma: A state-of-the-art review

The hierarchical architecture of natural and processed starches with different surface and internal structures determines their final physicochemical properties. However, the oriented control of starch structure presents a significant challenge, and non-thermal plasma (cold plasma, CP) has gradually been used to design and tailor starch macromolecules, though without clear illustration. In this review, the multi-scale structure (i.e., chain-length distribution, crystal structure, lamellar structure, and particle surface) of starch is summarized by CP treatment. The plasma type, mode, medium gas and mechanism are also illustrated, as well as their sustainable food applications, such as in food taste, safety, and packaging. The effects of CP on the chain-length distribution, lamellar structure, amorphous zone, and particle surface/core of starch includes irregularity due to the complex of CP types, action modes, and reactive conditions. CP-induced chain breaks lead to short-chain distributions in starch, but this rule is no longer useful when CP is combined with other physical treatments. The degree but not type of starch crystals is indirectly influenced by CP through attacking the amorphous region. Furthermore, the CP-induced surface corrosion and channel disintegration of starch cause changes in functional properties for starch-related applications.

Formation mechanism of starch nanocrystals from waxy rice starch and their separation by differential centrifugation

Starch nanocrystals (SNCs) were prepared from waxy rice starch via sulfuric acid hydrolysis. The objective focused on the following: i) the hydrolysis kinetics and structural properties of SNCs; ii) the effects of differential centrifugation on the yield and size distribution of SNCs. The hydrolysis was divided into a rapid hydrolysis stage in the initial two days and a slow hydrolysis stage after two days. During the two-day hydrolysis, the average diameter of SNCs reached 244 nm. After two days of hydrolysis, the degree of crystallinity, crystallite size, and melting temperature and enthalpy increased. The proportion of A-branched chains decreased, whereas the proportion of B1-branched chains and molecular weight did not change considerably. Thus, the reaction in the slow hydrolysis stage could be considered as the surface modification and gradual release of SNCs. Furthermore, SNCs with a small size and high charge density could be used for differential centrifugation.

Ozone exposure tunes the physicochemical properties of sweet potato starch by modifying its molecular structure

Ozonation is an efficient method for improving the technical performance of some starches, but the feasibility of its use for sweet potato starch remains unknown. The effects of aqueous ozonation on the multi-scale structure and physicochemical properties of sweet potato starch were explored. Structurally, ozonation did not generate significant alterations at the granular level (size, morphology, lamellar structure, and long-range and short-range ordered structures), but led to tremendous changes at the molecular level, including converting hydroxyl groups to carbonyl and carboxyl groups and depolymerizing starch molecules. These structural changes resulted in prominent alternations in the technological performance of sweet potato starch, such as increases in water solubility and paste clarity and decreases in water absorption capacity, paste viscosity, and paste viscoelasticity. For these traits, their amplitudes of variation elevated when the ozonation time was extended and peaked at the longest ozonation time (60 min). The greatest changes in paste setback (30 min), gel hardness (30 min), and the puffing capacity of the dried starch gel (45 min) were observed at moderate ozonation times. In summary, aqueous ozonation is a new method for fabricating sweet potato starch with improved functionality.

Physicochemical characterizations of five Dioscorea alata L. starches from China

D. alata is an important edible and medicinal plant in China. Its tuber is rich in starch but the understanding of the physiochemical properties of D. alata starch is limited. In order to explore the processing and application potential of different D. alata accessions in China, five kinds of D. alata starch (LY, WC, XT, GZ, SM) were isolated and characterized. The study showed that D. alata tubers contained abundant starch, enriched in amylose and resistant starch (RS). D. alata starches showed B-type or C-type diffraction pattern, had higher RS content and gelatinization temperature (GT), lower fa and viscosity when compared to D. opposita, D. esculenta, and D. nipponica. Among D. alata starches, D. alata (SM) showing the C-type diffraction pattern, had the lowest proportion of fa with 10.48 %, the highest amylose, RS2 and RS3 content of 40.24 %, 84.17 % and 10.48 % respectively, and the highest GT and viscosity. The results indicated that D. alata tubers are potential sources for novel starch with high amylose and RS content, and provided a theoretical basis for further utilizations of D. alata starch in food processing and industry application.

Structural, physicochemical and digestive properties of rice starch modified by preheating and pullulanase treatments

The structural, physicochemical and digestive properties of rice starch modified by the combination of different temperature (60, 70, 80, 90 and 100 °C) preheating and pullulanase (PUL60, PUL70, PUL80, PUL90 and PUL100) treatments were investigated. The PUL60 treatment mainly modified the surface layer of starch granules, which increased the amylose content and damaged some ordered structures, resulting in slight decreases of gel strength and estimated glycemic index (eGI). With the increase of preheating temperature, PUL could act on more enzymatic sites to release a large amount of linear chains, reduce the ordered degree, and transform the A-type crystalline structure into B-type. The low molecule interaction strength between linear chains weakened the gel network structure, and some stable crystal structures formed by longer chains resisted the enzyme digestion. The gel strength and eGI value of PUL70 starch decreased significantly, and the properties of PUL80-100 starches tended to be stable, showing a further significant decrease of gel strength and a slight reduction of eGI value. Therefore, the preheating treatments at 60, 70 and 80 °C were suitable for the PUL modification of rice starch to obtain strong, medium and weak gel strength respectively, and the digestibility decreased with increasing preheating temperature.

Lutein encapsulated in whey protein and citric acid potato starch ester: Construction and characterization of microcapsules

The poor water solubility and stability of lutein limit its application in industry. Microencapsulation technology is an excellent strategy to solve these problems. This study used citric acid esterified potato starch and whey protein as an emulsifier to prepare oil-in-water lutein emulsion, and microcapsules were constructed by spray drying technology. The effects of different component proportions on microcapsules' microstructure, physical and chemical properties, and storage stability were analyzed. Citrate esterified potato starch had good emulsifying properties, and when compounded with whey protein, the encapsulation efficiency (EE) of microcapsules increased, and the embedding effect of lutein improved. After microencapsulation, the solubility of lutein increased significantly, reaching over 49.71 %, and gradually raised with more whey protein content. Furthermore, the high proportion of whey protein helped improve microcapsules' EE and thermal properties, with the maximum EE reaching 89.36 %. The glass transition temperatures of microcapsules were all higher than room temperature, which indicated that they keep a stable state under general storage conditions. The experimental results of this study may provide a reference for applying lutein in food and other fields.

Dielectric barrier discharge cold plasma combined with cross-linking: An innovative way to modify the multi-scale structure and physicochemical properties of corn starch

Cold plasma is a low-cost, simple and green method for starch modification. In the present study, the impact of corn starch modification by cold plasma (CP, 1, 3 and 9 min), sodium trimetaphosphate/sodium tripolyphosphate (CL, 1 %, 5 % and 10 %) and their combination were investigated. CP-pretreatment had enhancement of phosphorus content and substitution degree. Neither CP nor CL destroyed the starch granules morphology. Instead, CP induced more short-chain to better rearrange the starch during the crosslinking process, which improved the efficiency of the crosslinker in the subsequent crosslinking process. Therefore, compared with CL or CP, the thermal transition temperatures increased after CP pretreatment, while the amylose content, relative crystallinity, swelling power, and △H decreased. Meanwhile, CP-pretreatment changed the internal structure of the CL-starch so that it showed the lowest enzymatic digestibility. CP pretreatment provides a promising way to improve cross-linked starch's structure, properties, and efficiency.

Cold plasma technologies: Their effect on starch properties and industrial scale-up for starchmodification

Native starches have limited applications in the food industry due to their unreactive and insoluble nature. Cold plasma technology, including plasma-activated water (PAW), has been explored to modify starches to enhance their functional, thermal, molecular, morphological, and physicochemical properties. Atmospheric cold plasma and low-pressure plasma systems have been used to alter starches and have proven successful. This review provides an in-depth analysis of the different cold plasma setups employed for starch modifications. The effect of cold plasma technology application on starch characteristics is summarized. We also discussed the potential of plasma-activated water as a novel alternative for starch modification. This review provides information needed for the industrial scale-up of cold plasma technologies as an eco-friendly method of starch modification.

•

Cold plasma technology could be an effective, sustainable alternative for starch modification.

•

The extent of modification of starches from different botanical sources depends on the type of cold plasma technology used.

•

For mainstream adoption of cold plasma modified starches, research on safety and consumer perception must be conducted.