Glycolipid biosurfactants: Potential related biomedical and biotechnological applications

Classification of surfactants and admixtures for producing stable aqueous foam

Surfactants and foam have captured the interest of researchers worldwide due to their unique behavior of surface activity, the dynamic nature of foam formation, and simultaneous destruction. The present review focuses on the surfactants' classification, surfactant-solvent interaction, foam formation, characteristics, and a range of admixtures to enhance the foam performance. Although surfactants have been researched and developed for decades, recently, their sustainability has been given special attention. One such aspect is the development of green foaming agents from natural and renewable sources and assessing their suitability for different applications. Further, widely researched parameters are the type of surfactant, surfactant concentration, surfactant-solvent interaction, and foam production method on the foamability of a surfactant solution and related foam characteristics, including stability and texture. However, still, there is no rule to predict the best foam. Another vital concern is the non-standardization of foam assessment methods across industries and regions. Recently, research has progressed in identifying suitable admixtures for foam performance enhancement and utilizing them to produce stable foams for application in enhanced oil recovery, drug delivery, and manufacturing of aerated food products and foamed concrete. Although foam stabilization using various admixtures has been recognized well in the literature, the underlying mechanism requires further research. The interaction of surfactant and admixtures in solution is complicated and requires more research.

Bioadhesive Polymeric Films Containing Rhamnolipids, An Innovative Antimicrobial Topical Formulation

Acne affects most of the world's population, causing an impact on the self-esteem of adolescents and young adults. One of the causes is the presence of the bacteria Cutibacterium acnes which are part of the natural microbiota of the skin. Topical treatments consist of anti-inflammatory and antibiotics, which could select resistant strains. Alternatives to the antibiotic are biocomposites that have antimicrobial activity like biosurfactants which are produced by bacteria. An innovative way of applying these compounds is bioadhesive polymeric films that adhere to the skin and release the active principle topically. Rhamnolipids have great potential to be used in the treatment of acne because they present antimicrobial activity against C. acnes in low and safe concentrations (MIC of 15.62 µg/mL, CBM of 31.25 µg/mL and CC50 of 181.93 µg/mL). Four films with different rhamnolipids concentrations (0.0; 0.1; 0.2; and 0.3%, w/w) were obtained as to visual appearance, mass variation, thickness, density, solubility, pH, water vapor transmission, mechanical properties (folding endurance, bioadhesion strength, tensile strength, elongation at break and Young's modulus), scanning electron microscopy and infrared. The results show that these formulations had a homogeneous appearance; elastic mechanical properties; pH similar to human skin and bioadhesive. The polymeric films containing rhamnolipids were effective against C. acnes, in the in vitro test, at the three concentrations tested, the film with the highest concentration (0.3%, w/w) being the most promising for presenting the highest antimicrobial activity. Thus, the polymeric film containing rhamnolipids has the potential to be used in the treatment of acne.

Potential of microbial-derived biosurfactants for oral applications-a systematic review

BACKGROUND

Biosurfactants are amphiphilic compounds produced by various microorganisms. Current research evaluates diverse types of biosurfactants against a range of oral pathogens.

OBJECTIVES

This systematic review aims to explore the potential of microbial-derived biosurfactants for oral applications.

METHODOLOGY

A systematic literature search was performed utilizing PubMed-MEDLINE, Scopus, and Web of Science databases with designated keywords. The results were registered in the PROSPERO database and conducted following the PRISMA checklist. Criteria for eligibility, guided by the PICOS framework, were established for both inclusion and exclusion criteria. The QUIN tool was used to assess the bias risk for in vitro dentistry studies.

RESULTS

Among the initial 357 findings, ten studies were selected for further analysis. The outcomes of this systematic review reveal that both crude and purified forms of biosurfactants exhibit antimicrobial and antibiofilm properties against various oral pathogens. Noteworthy applications of biosurfactants in oral products include mouthwash, toothpaste, and implant coating.

CONCLUSION

Biosurfactants have garnered considerable interest and demonstrated their potential for application in oral health. This is attributed to their surface-active properties, antiadhesive activity, biodegradability, and antimicrobial effectiveness against a variety of oral microorganisms, including bacteria and fungi.

Bioformulation of Bacillus proteolyticus MITWPUB1 and its biosurfactant to control the growth of phytopathogen Sclerotium rolfsii for the crop Brassica juncea var local, as a sustainable approach

Bacillus proteolyticus MITWPUB1 is a potential producer of biosurfactants (BSs), and the organism is also found to be a producer of plant growth promoting traits, such as hydrogen cyanide and indole acetic acid (IAA), and a solubilizer of phosphate. The BSs were reportedly a blend of two classes, namely glycolipids and lipopeptides, as found by thin layer chromatography and Fourier-transform infrared spectroscopy analysis. Furthermore, semi-targeted metabolite profiling via liquid chromatography mass spectroscopy revealed the presence of phospholipids, lipopeptides, polyamines, IAA derivatives, and carotenoids. The BS showed dose-dependent antagonistic activity against Sclerotium rolfsii; scanning electron microscopy showed the effects of the BS on S. rolfsii in terms of mycelial deformations and reduced branching patterns. In vitro studies showed that the application of B. proteolyticus MITWPUB1 and its biosurfactant to seeds of Brassica juncea var local enhanced the seed germination rate. However, sawdust-carrier-based bioformulation with B. proteolyticus MITWPUB1 and its BS showed increased growth parameters for B. juncea var L. This study highlights a unique bioformulation combination that controls the growth of the phytopathogen S. rolfsii and enhances the plant growth of B. juncea var L. Bacillus proteolyticus MITWPUB1 was also shown for the first time to be a prominent BS producer with the ability to control the growth of the phytopathogen S. rolfsii.

Sustainable biosurfactant production from secondary feedstock-recent advances, process optimization and perspectives

Biosurfactants have garnered increased attention lately due to their superiority of their properties over fossil-derived counterparts. While the cost of production remains a significant hurdle to surpass synthetic surfactants, biosurfactants have been anticipated to gain a larger market share in the coming decades. Among these, glycolipids, a type of low-molecular-weight biosurfactant, stand out for their efficacy in reducing surface and interfacial tension, which made them highly sought-after for various surfactant-related applications. Glycolipids are composed of hydrophilic carbohydrate moieties linked to hydrophobic fatty acid chains through ester bonds that mainly include rhamnolipids, trehalose lipids, sophorolipids, and mannosylerythritol lipids. This review highlights the current landscape of glycolipids and covers specific glycolipid productivity and the diverse range of products found in the global market. Applications such as bioremediation, food processing, petroleum refining, biomedical uses, and increasing agriculture output have been discussed. Additionally, the latest advancements in production cost reduction for glycolipid and the challenges of utilizing second-generation feedstocks for sustainable production are also thoroughly examined. Overall, this review proposes a balance between environmental advantages, economic viability, and societal benefits through the optimized integration of secondary feedstocks in biosurfactant production.

Harnessing the Potential of Biosurfactants for Biomedical and Pharmaceutical Applications

Biosurfactants (BSs) are microbial compounds that have emerged as potential alternatives to chemical surfactants due to their multifunctional properties, sustainability and biodegradability. Owing to their amphipathic nature and distinctive structural arrangement, biosurfactants exhibit a range of physicochemical properties, including excellent surface activity, efficient critical micelle concentration, humectant properties, foaming and cleaning abilities and the capacity to form microemulsions. Furthermore, numerous biosurfactants display additional biological characteristics, such as antibacterial, antifungal and antiviral effects, and antioxidant, anticancer and immunomodulatory activities. Over the past two decades, numerous studies have explored their potential applications, including pharmaceuticals, cosmetics, antimicrobial and antibiofilm agents, wound healing, anticancer treatments, immune system modulators and drug/gene carriers. These applications are particularly important in addressing challenges such as antimicrobial resistance and biofilm formations in clinical, hygiene and therapeutic settings. They can also serve as coating agents for surfaces, enabling antiadhesive, suppression, or eradication strategies. Not least importantly, biosurfactants have shown compatibility with various drug formulations, including nanoparticles, liposomes, micro- and nanoemulsions and hydrogels, improving drug solubility, stability and bioavailability, and enabling a targeted and controlled drug release. These qualities make biosurfactants promising candidates for the development of next-generation antimicrobial, antibiofilm, anticancer, wound-healing, immunomodulating, drug or gene delivery agents, as well as adjuvants to other antibiotics. Analysing the most recent literature, this review aims to update the present understanding, highlight emerging trends, and identify promising directions and advancements in the utilization of biosurfactants within the pharmaceutical and biomedical fields.

Glycolipid Biosurfactants in Skincare Applications: Challenges and Recommendations for Future Exploitation

The 21st century has seen a substantial increase in the industrial applications of glycolipid biosurfactant technology. The market value of the glycolipid class of molecules, sophorolipids, was estimated to be USD 409.84 million in 2021, with that of rhamnolipid molecules projected to reach USD 2.7 billion by 2026. In the skincare industry, sophorolipid and rhamnolipid biosurfactants have demonstrated the potential to offer a natural, sustainable, and skin-compatible alternative to synthetically derived surfactant compounds. However, there are still many barriers to the wide-scale market adoption of glycolipid technology. These barriers include low product yield (particularly for rhamnolipids) and potential pathogenicity of some native glycolipid-producing microorganisms. Additionally, the use of impure preparations and/or poorly characterised congeners as well as low-throughput methodologies in the safety and bioactivity assessment of sophorolipids and rhamnolipids challenges their increased utilisation in both academic research and skincare applications. This review considers the current trend towards the utilisation of sophorolipid and rhamnolipid biosurfactants as substitutes to synthetically derived surfactant molecules in skincare applications, the challenges associated with their application, and relevant solutions proposed by the biotechnology industry. In addition, we recommend experimental techniques/methodologies, which, if employed, could contribute significantly to increasing the acceptance of glycolipid biosurfactants for use in skincare applications while maintaining consistency in biosurfactant research outputs.

Rhamnolipid Self-Aggregation in Aqueous Media: A Long Journey toward the Definition of Structure–Property Relationships

The need to protect human and environmental health and avoid the widespread use of substances obtained from nonrenewable sources is steering research toward the discovery and development of new molecules characterized by high biocompatibility and biodegradability. Due to their very widespread use, a class of substances for which this need is particularly urgent is that of surfactants. In this respect, an attractive and promising alternative to commonly used synthetic surfactants is represented by so-called biosurfactants, amphiphiles naturally derived from microorganisms. One of the best-known families of biosurfactants is that of rhamnolipids, which are glycolipids with a headgroup formed by one or two rhamnose units. Great scientific and technological effort has been devoted to optimization of their production processes, as well as their physicochemical characterization. However, a conclusive structure–function relationship is far from being defined. In this review, we aim to move a step forward in this direction, by presenting a comprehensive and unified discussion of physicochemical properties of rhamnolipids as a function of solution conditions and rhamnolipid structure. We also discuss still unresolved issues that deserve further investigation in the future, to allow the replacement of conventional surfactants with rhamnolipids.

Biosurfactant promoted enzymatic saccharification of alkali‑pretreated reed straw

The decrease of cellulase activity and unproductive adsorption of lignin are important obstructive factors for inefficient enzymatic hydrolysis. This paper applied five different kinds of biosurfactants including rhamnolipid, sophorolipid, chitin, tea saponin, and sodium lignosulfonate in the enzymatic hydrolysis process of alkali-pretreated reed straw (RS) to enhance the saccharification efficiency. When 8 g/L sophorolipid is added, the efficiency of enzymatic hydrolysis is 91.68 %, which is 30.65 % higher than that without using any biosurfactant. The efficiency of enzymatic hydrolysis can be further increased to 99.56 % when 7.5 g/L sophorolipid and 1.5 g/L tea saponin are added together. This is because the sophorolipid, rhamnolipid, and chitin can synergistically hamper the enzymatic inactivation during enzymatic hydrolysis, while tea saponin and sodium lignosulfonate can inhibit the non-productive adsorption of lignin. This work proposed a very effective method to improve the efficiency of enzymatic hydrolysis and reduce the dosage of the enzyme by adding biosurfactants.

Sophorolipids: A comprehensive review on properties and applications

Sophorolipids are surface-active glycolipids produced by several non-pathogenic yeast species and are widely used as biosurfactants in several industrial applications. Sophorolipids provide a plethora of benefits over chemically synthesized surfactants for certain applications like bioremediation, oil recovery, and pharmaceuticals. They are, for instance less toxic, more benign and environment friendly in nature, biodegradable, freely adsorb to different surfaces, self-assembly in hydrated solutions, robustness for industrial applications etc. These miraculous properties result in valuable physicochemical attributes such as low critical micelle concentrations (CMCs), reduced interfacial surface tension, and capacity to dissolve non-polar components. Moreover, they exhibit a diverse range of physicochemical, functional, and biological attributes due to their unique molecular composition and structure. In this article, we highlight the physico-chemical properties of sophorolipids, how these properties are exploited by the human community for extensive benefits and the conditions which lead to their unique tailor-made structures and how they entail their interfacial behavior. Besides, we discuss the advantages and disadvantages associated with the use of these sophorolipids. We also review their physiological and functional attributes, along with their potential commercial applications, in real-world scenario. Biosurfactants are compared to their man-made equivalents to show the variations in structure-property correlations and possible benefits. Those attempting to manufacture purported natural or green surfactant with innovative and valuable qualities can benefit from an understanding of biosurfactant features structured along the same principles. The uniqueness of this review article is the detailed physico-chemical study of the sophorolipid biosurfactant and how these properties helps in their usage and detailed explicit study of their applications in the current scenario and also covering their pros and cons.

Renewable carbon sources to biochemicals and -fuels: contributions of the smut fungi Ustilaginaceae

The global demand for food, fuels, and chemicals increases annually. Using renewable C-sources (i.e. biomass, CO₂, and organic waste) is a prerequisite for a future free of fossil carbon. The smut fungi Ustilaginaceae naturally produce a versatile spectrum of valuable products, such as organic acids, polyols, and glycolipids, applicable in the food, energy, chemistry, and pharmaceutical sector. Combined with the use of alternative (co-)substrates (e.g. acetate, butanediol, formate, and glycerol), these microorganisms offer excellent potential for industrial biotechnology, thereby overcoming central challenges humankind faces, including CO₂ release and land use. Here, we provide insight into fundamental production capacities, present genetic modifications that improve the biotechnical application, and review recent high-performance engineering of Ustilaginaceae toward relevant platform chemicals.

Novel Organic Solvent Nanofiltration Approaches for Microbial Biosurfactants Downstream Processing

Glycolipid biosurfactants are the most prominent group of microbial biosurfactants, comprising rhamnolipids, sophorolipids and mannosylerythritol lipids (MELs). Usually, large amounts of hydrophobic substrates (e.g., vegetable oils) are used to achieve high titers (~200 g/L) of a crude product of low purity at values limited to 50-60%, contaminated with unconsumed triacylglycerol and residual free fatty acids and monoacylglycerides. The methods reported for the removal of these contaminants use a mixture of organic solvents, compromising solvent recyclability and increasing final process costs. This study reports, for the first time, an innovative downstream method for MELs, in which 90% of the triacylglycerols are separated from the crude MEL mixture in a first stage and the other lipid derivatives (free fatty acids, mono- and diacylglycerols) are removed by organic solvent nanofiltration (OSN). Three commercially available membranes (GMT-oNF-2, PuraMEm-600 and DuramMem-500) and several homemade membranes, casted from 22, 24 or 26% (w/v) polybenzimidazole (PBI) solutions, were assessed for crude MELs purification by diafiltration. A final purity of 87-90% in the MELs was obtained by filtering two diavolumes of methanol or ethyl acetate solutions through a PBI 26% membrane, resulting in MELs losses of 14.7 ± 6.1% and 15.3 ± 2.2%, respectively. Higher biosurfactant purities can be archived using the PBI 26% membrane at higher DV, but at the cost of higher product losses. Namely, in MeOH, the use of 6 DV leads to losses of 32% for MELs and 18% for sophorolipids. To obtain MELs at reagent grade with purities equal or higher than 97%, a two-sequential cascade filtration approach was implemented using the commercial membrane, GMT-oNF. In such a process, MELs with 98% purity was obtained at the cost of 11.6% MELs losses. Finally, decoloration, important in some applications, was successfully assessed using activated carbon. Overall, this study reports a unique solution for microbial biosurfactants production with minimal product losses, enabling solvent recycling and potentially reducing costs.

Characterization of Neochloris oleoabundans under Different Cultivation Modes and First Results on Bioactivity of Its Extracts against HCoV-229E Virus

Microalgae are proposed in several biotechnological fields because of their ability to produce biomass enriched in high-value compounds according to cultivation conditions. Regarding the health sector, an emerging area focuses on natural products exploitable against viruses. This work deals with the characterization of the green microalga Neochloris oleoabundans cultivated under autotrophic and mixotrophic conditions as a source of whole aqueous extracts, tested as antivirals against HCoV-229E (Coronaviridae family). Glucose was employed for mixotrophic cultures. Growth and maximum quantum yield of photosystem II were monitored for both cultivations. Algae extracts for antiviral tests were prepared using cultures harvested at the early stationary phase of growth. Biochemical and morphological analyses of algae indicated a different content of the most important classes of bioactive compounds with antiviral properties (lipids, exo-polysaccharides, and total phenolics, proteins and pigments). To clarify which phase of HCoV-229E infection on MRC-5 fibroblast cells was affected by N. oleoabundans extracts, four conditions were tested. Extracts gave excellent results, mainly against the first steps of virus infection. Notwithstanding the biochemical profile of algae/extracts deserves further investigation, the antiviral effect may have been mainly promoted by the combination of proteins/pigments/phenolics for the extract derived from autotrophic cultures and of proteins/acidic exo-polysaccharides/lipids in the case of mixotrophic ones.

Characterisation of cytotoxicity and immunomodulatory effects of glycolipid biosurfactants on human keratinocytes

Abstract

Skin irritation and allergic reactions associated with the use of skincare products formulated with synthetically derived surfactants such as sodium lauryl ether sulphate (SLES) have encouraged the search for naturally derived and biocompatible alternatives. Glycolipid biosurfactants such as sophorolipids (SL) and rhamnolipids (RL) offer a potential alternative to SLES. However, most studies on the bioactive properties of microbial glycolipids were determined using their mixed congeners, resulting in significant inter-study variations. This study aims to compare the effects of highly purified SL (acidic and lactonic) and RL (mono-RL and di-RL) congeners and SLES on a spontaneously transformed human keratinocyte cell line (HaCaT cells) to assess glycolipids’ safety for potential skincare applications. Preparations of acidic SL congeners were 100% pure, lactonic SL were 100% pure, mono-RL were 96% pure, and di-RL were 97% pure. Cell viability using XTT assays, cell morphological analyses, and immunoassays revealed that microbial glycolipids have differing effects on HaCaT cells dependent on chemical structure. Compared with SLES, acidic SL and mono-RL have negligible effects on cell viability, cell morphology, and production of pro-inflammatory cytokines. Furthermore, at non-inhibitory concentrations, di-RL significantly attenuated IL-8 production and CXCL8 expression while increasing IL-1RA production and IL1RN expression in lipopolysaccharide-stimulated HaCaT cells. Although further studies would be required, these results demonstrate that as potential innocuous and bioactive compounds, microbial glycolipids could provide a substitute to synthetic surfactants in skincare formulations and perform immunopharmacological roles in topical skin infections such as psoriasis.

Key points

• Purified glycolipid congeners have differing effects on human keratinocytes.

• Compared with SLES, acidic sophorolipids and mono-rhamnolipids have innocuous effects on keratinocytes.

• Di-rhamnolipids and mono-rhamnolipids modulate cytokine production in lipopolysaccharide stimulated human keratinocytes.

Sophorolipid Suppresses LPS-Induced Inflammation in RAW264.7 Cells through the NF-κB Signaling Pathway

Objectives: Biosurfactants with anti-inflammatory activity may alleviate skin irritation caused by synthetic surfactants in cleaning products. Sophorolipid (SL) is a promising alternative to synthetic surfactants. However, there are few reports on the anti-inflammatory activity of SL and the underlying mechanism. The purpose of this work is to verify that lipopolysaccharide (LPS)-induced inflammation could be inhibited through targeting the pathway of nuclear factor-κB (NF-κB) in RAW264.7 cells. Methods: The influence of SL on cytokine release was investigated by LPS-induced RAW264.7 cells using ELISA. The quantification of the protein expression of corresponding molecular markers was realized by Western blot analysis. Flow cytometry was employed to determine the levels of Ca²⁺ and reactive oxygen species (ROS). The relative expression of inducible nitric oxide synthase (INOS) and cyclooxygenase-2 (COX-2) was determined by RT-PCR. An immunofluorescence assay and confocal microscope were used to observe the NF-κB/p65 translocation from the cytoplasm into the nucleus. The likely targets of SL were predicted by molecular docking analysis. Results: SL showed anti-inflammatory activity and reduced the release of inflammatory cytokines including interleukin-6 (IL-6), tumor necrosis factor-α (TNF-α), and nitric oxide (NO). The experimental results show that SL suppressed the Ca²⁺ and ROS levels influx in the LPS-induced RAW264.7 cells and alleviated the LPS-induced expression of iNOS and COX-2, the LPS-induced translocation of NF-κB (p65) from the cytoplasm into the nucleus, and the expression of phosphorylated proteins such as p65 and IκBα. Furthermore, molecular docking analysis showed that SL may inhibit inflammatory signaling by competing with LPS to bind TLR4/MD-2 through hydrophobic interactions and by inhibiting IKKβ activation through the hydrogen bonding and hydrophobic interactions. Conclusion: This study demonstrated that SL exerted anti-inflammatory activity via the pathway of NF-κB in RAW264.7 cells.

Phase Behaviour, Functionality, and Physicochemical Characteristics of Glycolipid Surfactants of Microbial Origin

Growing demand for biosurfactants as environmentally friendly counterparts of chemically derived surfactants enhances the extensive search for surface-active compounds of biological (microbial) origin. The understanding of the physicochemical properties of biosurfactants such as surface tension reduction, dispersion, emulsifying, foaming or micelle formation is essential for the successful application of biosurfactants in many branches of industry. Glycolipids, which belong to the class of low molecular weight surfactants are currently gaining a lot of interest for industrial applications. For this reason, we focus mainly on this class of biosurfactants with particular emphasis on rhamnolipids and sophorolipids, the most studied of the glycolipids.

Characterization and Cytotoxicity of Pseudomonas Mediated Rhamnolipids Against Breast Cancer MDA-MB-231 Cell Line

A biosurfactant producing bacterium was identified as Pseudomonas aeruginosa DNM50 based on molecular characterization (NCBI accession no. MK351591). Structural characterization using MALDI-TOF revealed the presence of 12 different congeners of rhamnolipid such as Rha-C8-C8:1, Rha-C10-C8:1, Rha-C10-C10, Rha-C10-C12:1, Rha-C16:1, Rha-C16, Rha-C17:1, Rha-Rha-C10:1-C10:1, Rha-Rha-C10-C12, Rha-Rha-C10-C8, Rha-Rha-C10-C8:1, and Rha-Rha-C8-C8. The radical scavenging activity of rhamnolipid (DNM50RL) was determined by 2, 3-diphenyl-1-picrylhydrazyl (DPPH) assay which showed an IC₅₀ value of 101.8 μg/ ml. The cytotoxic activity was investigated against MDA-MB-231 breast cancer cell line by MTT (4,5-dimethylthiazol-2-yl-2,5-diphenyl tetrazolium bromide) assay which showed a very low IC50 of 0.05 μg/ ml at 72 h of treatment. Further, its activity was confirmed by resazurin and trypan blue assay with IC₅₀ values of 0.01 μg/ml and 0.64 μg/ ml at 72 h of treatment, respectively. Thus, the DNM50RL would play a vital role in the treatment of breast cancer targeting inhibition of p38MAPK.

Antiviral Activity of the Rhamnolipids Mixture from the Antarctic Bacterium Pseudomonas gessardii M15 against Herpes Simplex Viruses and Coronaviruses

Emerging and re-emerging viruses represent a serious threat to human health at a global level. In particular, enveloped viruses are one of the main causes of viral outbreaks, as recently demonstrated by SARS-CoV-2. An effective strategy to counteract these viruses could be to target the envelope by using surface-active compounds. Rhamnolipids (RLs) are microbial biosurfactants displaying a wide range of bioactivities, such as antibacterial, antifungal and antibiofilm, among others. Being of microbial origin, they are environmentally-friendly, biodegradable, and less toxic than synthetic surfactants. In this work, we explored the antiviral activity of the rhamnolipids mixture (M15RL) produced by the Antarctic bacteria Pseudomonas gessardii M15 against viruses belonging to Coronaviridae and Herpesviridae families. In addition, we investigated the rhamnolipids’ mode of action and the possibility of inactivating viruses on treated surfaces. Our results show complete inactivation of HSV-1 and HSV-2 by M15RLs at 6 µg/mL, and of HCoV-229E and SARS-CoV-2 at 25 and 50 µg/mL, respectively. Concerning activity against HCoV-OC43, 80% inhibition of cytopathic effect was recorded, while no activity against naked Poliovirus Type 1 (PV-1) was detectable, suggesting that the antiviral action is mainly directed towards the envelope. In conclusion, we report a significant activity of M15RL against enveloped viruses and demonstrated for the first time the antiviral effect of rhamnolipids against SARS-CoV-2.

Surfactin cyclic lipopeptides change the plasma membrane composition and lateral organization in mammalian cells

The specific structure and composition of the cell plasma membrane (PM) is crucial for many cellular processes and can be targeted by various substances with potential medical applications. In this context, biosurfactants (BS) constitute a promising group of natural compounds that possess several biological functions, including anticancer activity. Despite the efficiency of BS, their mode of action had never been elucidated before. Here, we demonstrate the influence of cyclic lipopeptide surfactin (SU) on the PM of CHO-K1 cells. Both FLIM and svFCS experiments show that even a low concentration of SU causes significant changes in the membrane fluidity and dynamic molecular organization. Further, we demonstrate that SU causes a relevant dose-dependent reduction of cellular cholesterol by extracting it from the PM. Finally, we show that CHO-25RA cells characterized by increased cholesterol levels are more sensitive to SU treatment than CHO-K1 cells. We propose that sterols organizing the PM raft nanodomains, constitute a potential target for SU and other biosurfactants. In our opinion, the anticancer activity of biosurfactants is directly related with the higher cholesterol content found in many cancer cells.

Studies on antibacterial and chemotaxis properties of Pseudomonas aeruginosa TEN01 biomass-derived sustainable biosurfactant

Biosurfactant producing bacterial strains were isolated from oil-contaminated sites at Chennai Petroleum Corporation Limited, Chennai, the potential strain was selected and identified as Pseudomonas aeruginosa TEN01 by 16 S rRNA sequencing technique. Biosurfactant was produced from cassava solid waste from the sago industry. Further, it was extracted by solvent extraction and partially purified by column chromatography. The partially purified biosurfactant was qualitatively analyzed by Thin Layer Chromatography (TLC), quantitatively analyzed by anthrone assay and characterized by Fourier Transform Infra-Red Spectroscopy (FT-IR) and Gas Chromatography-Mass Spectrometry (GC-MS). R_f value and chemical groups confirm the presence of glycolipid in the partially purified biosurfactant. GC-MS results confirmed the presence of long-chain fatty acids and carbohydrate which is found to be mainly present in glycolipids. Biosurfactants are surface-active molecules which have been found to be the best alternative to chemical-based surfactants. The present study focuses on modifying the cell surface using a biosurfactant from P. aeruginosa TEN01 to enhance membrane permeabilization. Antibacterial and chemotaxis properties of biosurfactant from P. aeruginosa TEN01 were found to be better towards Xenorhabdus poinarii, a bio-pesticide producing microbial strain, X. poinarii exhibited 81.7% adhesion to hydrocarbons upon biosurfactant treatment as analyzed by Bacterial Adhesion to Hydrocarbon (BATH) assay. The alteration in the membrane permeability was tested in X. poinarii using biosurfactant and chemical surfactants viz. Sodium dodecyl sulfate (SDS) and toluene by estimating the amount of intracellular protein released. High protein recovery (51.55%) was achieved with a biosurfactant. Cell viability in the biosurfactant-treated cells was also high (93.98%) in comparison to cells treated with chemical surfactants. Increased recovery of intracellular protein along with high cell viability makes the biosurfactant a potential candidate for application in numerous environmental fields.

Inhibitory properties of crude microalgal extracts on the in vitro replication of cyprinid herpesvirus 3

Microalgae are possible sources of antiviral substances, e.g. against cyprinid herpesvirus 3 (CyHV-3). Although this virus leads to high mortalities in aquacultures, there is no treatment available yet. Hence, ethanolic extracts produced with accelerated solvent extraction from six microalgal species (Arthrospira platensis, Chlamydomonas reinhardtii, Chlorella kessleri, Haematococcus pluvialis, Nostoc punctiforme and Scenedesmus obliquus) were examined in this study. An inhibition of the in vitro replication of CyHV-3 could be confirmed for all six species, with the greatest effect for the C. reinhardtii and H. pluvialis crude extracts. At still non-cytotoxic concentrations, viral DNA replication was reduced by over 3 orders of magnitude each compared to the untreated replication controls, while the virus titers were even below the limit of detection (reduction of 4 orders of magnitude). When pre-incubating both cells and virus with C. reinhardtii and H. pluvialis extracts before inoculation, the reduction of viral DNA was even stronger (> 4 orders of magnitude) and no infectious viral particles were detected. Thus, the results of this study indicate that microalgae and cyanobacteria are a promising source of natural bioactive substances against CyHV-3. However, further studies regarding the isolation and identification of the active components of the extracts are needed.

Self-Assembling Properties and Recovery Effects on Damaged Skin Cells of Chemically Synthesized Mannosylerythritol Lipids

Mannosylerythritol lipids (MELs), which are one of the representative sugar-based biosurfactants (BSs) produced by microorganisms, have attracted much attention in various fields in the sustainable development goals (SDGs) era. However, they are inseparable mixtures with respect to the chain length of the fatty acids. In this study, self-assembling properties and structure-activity relationship (SAR) studies of recovery effects on damaged skin cells using chemically synthesized MELs were investigated. It was revealed, for the first time, that synthetic and homogeneous MELs exhibited significant self-assembling properties to form droplets or giant vesicles. In addition, a small difference in the length of the fatty acid chains of the MELs significantly affected their recovery effects on the damaged skin cells. MELs with medium or longer length alkyl chains exhibited much higher recovery effects than that of C18-ceramide NP.

Biosurfactants: Potential Agents for Controlling Cellular Communication, Motility, and Antagonism

Biosurfactants are surface-active molecules produced by microorganisms, either on the cell surface or secreted extracellularly. They form a thin film on the surface of microorganisms and help in their detachment or attachment to other cell surfaces. They are involved in regulating the motility of bacteria and quorum sensing. Here, we describe the various types of biosurfactants produced by microorganisms and their role in controlling motility, antagonism, virulence, and cellular communication.

Sophorolipid: A glycolipid biosurfactant as a potential therapeutic agent against COVID-19

Biosurfactants are natural surfactants produced by a variety of microorganisms. In recent years, biosurfactants have garnered a lot of interest due to their biomedical and pharmaceutical applications. Sophorolipids are glycolipids types of biosurfactants produced by selected non-pathogenic yeasts. In addition to the detergent activity (reduction in surface and interfacial tension), which is commonly utilized by biomedical applications, sophorolipids have shown some unique properties such as, antiviral activity against enveloped viruses, immunomodulation, and anticancer activity. Considering their antiviral activity, the potential of sophorolipids as an antiviral therapy for the treatment of COVID-19 is discussed in this review. Being a surfactant molecule, sophorolipid could solubilize the lipid envelope of SARS-CoV-2 and inactivate it. As an immunomodulator, sophorolipid could attenuate the cytokine storm caused by the SARS-CoV-2 upon infection, and inhibit the progression of COVID-19 in patients. Sophorolipids could also be used as an effective treatment strategy for COVID-19 patients suffering from cancer. However, there is limited research on the use of sophorolipid as a therapeutic agent for the treatment of cancer and viral diseases, and to modulate the immune response. Nevertheless, the multitasking capabilities of sophorolipids make them potential therapeutic candidates for the bench-to-bedside research for the treatment of COVID-19.

Interaction of an acidic sophorolipid biosurfactant with phosphatidylcholine model membranes

Sophorolipids (SLs) constitute a group of unique biosurfactants (BS) in the light of their outstanding properties, among which their antimicrobial activities stand out. SLs can exist mainly in an acidic and a lactonic form, both of which display inhibitory activity. Given the amphipathic nature of SLs it is feasible that these antimicrobial actions are the result of the perturbation of the physicochemical properties of targeted membranes. Thus, in this work we have carried out a biophysical study to unveil the molecular details of the interaction of an acidic SL with a model phospholipid membrane made of 1,2-dipalmitoy-sn-glycero-3-phosphocholine (DPPC). Using differential scanning calorimetry it was found that SL altered the phase behaviour of DPPC at low molar fractions, producing fluid phase immiscibility with the result of formation of biosurfactant-enriched domains within the phospholipid bilayer. Fourier-transform infrared spectroscopy showed that SL interacted with DPPC increasing ordering of the phospholipid acyl chain palisade and hydration of the lipid/water interface. Small angle X-ray scattering showed that SL did not modify bilayer thickness in the biologically relevant L_α fluid phase. SL was found to induce contents leakage in 1-palmitoy-2-oleoy-sn-glycero-3-phosphocholine (POPC) unilamellar liposomes, at sublytic concentrations below the cmc. This SL-induced membrane permeabilization at concentrations below the onset for membrane solubilization can be the result of the formation of laterally segregated domains, which might contribute to provide a molecular basis for the reported antimicrobial actions of SLs.

Biosurfactants: Properties and Applications in Drug Delivery, Biotechnology and Ecotoxicology

Surfactants are amphiphilic compounds having hydrophilic and hydrophobic moieties in their structure. They can be of synthetic or of microbial origin, obtained respectively from chemical synthesis or from microorganisms’ activity. A new generation of ecofriendly surfactant molecules or biobased surfactants is increasingly growing, attributed to their versatility of applications. Surfactants can be used as drug delivery systems for a range of molecules given their capacity to create micelles which can promote the encapsulation of bioactives of pharmaceutical interest; besides, these assemblies can also show antimicrobial properties. The advantages of biosurfactants include their high biodegradability profile, low risk of toxicity, production from renewable sources, functionality under extreme pH and temperature conditions, and long-term physicochemical stability. The application potential of these types of polymers is related to their properties enabling them to be processed by emulsification, separation, solubilization, surface (interfacial) tension, and adsorption for the production of a range of drug delivery systems. Biosurfactants have been employed as a drug delivery system to improve the bioavailability of a good number of drugs that exhibit low aqueous solubility. The great potential of these molecules is related to their auto assembly and emulsification capacity. Biosurfactants produced from bacteria are of particular interest due to their antibacterial, antifungal, and antiviral properties with therapeutic and biomedical potential. In this review, we discuss recent advances and perspectives of biosurfactants with antimicrobial properties and how they can be used as structures to develop semisolid hydrogels for drug delivery, in environmental bioremediation, in biotechnology for the reduction of production costs and also their ecotoxicological impact as pesticide alternative.

Surface-assisted Laser Desorption/ionization Mass Spectrometry Analysis of the Glycolipid Biosurfactants, Mannosylerythritol Lipids, Using an Ionization-assisting Substrate

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is a promising tool for the screening of glycolipid-type biosurfactants (BSs) from a crude extract of microbial products. However, it is unsuitable for the detection of lower molecular weight products because the observed ions are overlapped with matrix-derived ions at lower mass range. In this study, we applied a "matrix-free" surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) analysis using a through-hole alumina membrane as an ionization-assisting substrate. Using this method, we could detect a variety of lower molecular weight products in an extract of a glycolipid BS producer with good sensitivity. In addition, the culture solution could be analyzed directly by this method.

Evaluation of Microalgae Antiviral Activity and Their Bioactive Compounds

During the last year, science has been focusing on the research of antivirally active compounds overall after the SARS-CoV-2 pandemic, which caused a great amount of deaths and the downfall of the economy in 2020. Photosynthetic organisms such as microalgae are known to be a reservoir of bioactive secondary metabolites; this feature, coupled with the possibility of achieving very high biomass levels without excessive energetic expenses, make microalgae worthy of attention in the search for new molecules with antiviral effects. In this work, the antiviral effects of microalgae against some common human or animal viruses were considered, focusing our attention on some possible effects against SARS-CoV-2. We summed up the data from the literature on microalgae antiviral compounds, from the most common ones, such as lectins, polysaccharides and photosynthetic pigments, to the less known ones, such as unidentified proteins. We have discussed the effects of a microalgae-based genetic engineering approach against some viral diseases. We have illustrated the potential antiviral benefits of a diet enriched in microalgae.

Surfactants of microbial origin as antibiofilm agents

The microbial world provides new energy sources and many various 'green' chemicals. One type of chemicals produced by microorganisms is the biosurfactant group. Biosurfactants are universal molecules, exhibiting surface properties often accompanied by desired biological activity. Biosurfactants are considered to be environmentally 'friendly' due to their low toxicity and biodegradable nature. These compounds have unique features and therefore they can find potential applications in many different industries, ranging from biotechnology to environmental remediation technologies. Antibacterial and antifungal activities make them relevant for applications as inhibitory agents against microbial biofilm. This review covers the current knowledge and the recent advances in the field of biosurfactants as antibiofilm agents.

Lipase-Catalyzed Production of Sorbitol Laurate in a "2-in-1" Deep Eutectic System: Factors Affecting the Synthesis and Scalability

Surfactants, such as glycolipids, are specialty compounds that can be encountered daily in cleaning agents, pharmaceuticals or even in food. Due to their wide range of applications and, more notably, their presence in hygiene products, the demand is continuously increasing worldwide. The established chemical synthesis of glycolipids presents several disadvantages, such as lack of specificity and selectivity. Moreover, the solubility of polyols, such as sugars or sugar alcohols, in organic solvents is rather low. The enzymatic synthesis of these compounds is, however, possible in nearly water-free media using inexpensive and renewable building blocks. Using lipases, ester formation can be achieved under mild conditions. We propose, herein, a "2-in-1" system that overcomes solubility problems, as a Deep Eutectic System (DES) made of sorbitol and choline chloride replaces either a purely organic or aqueous medium. For the first time, 16 commercially available lipase formulations were compared, and the factors affecting the conversion were investigated to optimize this process, owing to a newly developed High-Performance Liquid Chromatography-Evaporative Light Scattering Detector (HPLC-ELSD) method for quantification. Thus, using 50 g/L of lipase formulation Novozym 435® at 50 °C, the optimized synthesis of sorbitol laurate (SL) allowed to achieve 28% molar conversion of 0.5 M of vinyl laurate to its sugar alcohol monoester when the DES contained 5 wt.% water. After 48h, the de novo synthesized glycolipid was separated from the media by liquid-liquid extraction, purified by flash-chromatography and characterized thoroughly by one- and two-dimensional Nuclear Magnetic Resonance (NMR) experiments combined to Mass Spectrometry (MS). In completion, we provide initial proof of scalability for this process. Using a 2.5 L stirred tank reactor (STR) allowed a batch production reaching 25 g/L in a highly viscous two-phase system.

Total synthesis, isolation, surfactant properties, and biological evaluation of ananatosides and related macrodilactone-containing rhamnolipids

Rhamnolipids are a specific class of microbial surfactants, which hold great biotechnological and therapeutic potential. However, their exploitation at the industrial level is hampered because they are mainly produced by the opportunistic pathogen Pseudomonas aeruginosa. The non-human pathogenic bacterium Pantoea ananatis is an alternative producer of rhamnolipid-like metabolites containing glucose instead of rhamnose residues. Herein, we present the isolation, structural characterization, and total synthesis of ananatoside A, a 15-membered macrodilactone-containing glucolipid, and ananatoside B, its open-chain congener, from organic extracts of P. ananatis. Ananatoside A was synthesized through three alternative pathways involving either an intramolecular glycosylation, a chemical macrolactonization or a direct enzymatic transformation from ananatoside B. A series of diasteroisomerically pure (1→2), (1→3), and (1→4)-macrolactonized rhamnolipids were also synthesized through intramolecular glycosylation and their anomeric configurations as well as ring conformations were solved using molecular modeling in tandem with NMR studies. We show that ananatoside B is a more potent surfactant than its macrolide counterpart. We present evidence that macrolactonization of rhamnolipids enhances their cytotoxic and hemolytic potential, pointing towards a mechanism involving the formation of pores into the lipidic cell membrane. Lastly, we demonstrate that ananatoside A and ananatoside B as well as synthetic macrolactonized rhamnolipids can be perceived by the plant immune system, and that this sensing is more pronounced for a macrolide featuring a rhamnose moiety in its native 1 C 4 conformation. Altogether our results suggest that macrolactonization of glycolipids can dramatically interfere with their surfactant properties and biological activity.

Synergistic antibacterial and antibiofilm effects of ultrasound and MEL-A against methicillin-resistant Staphylococcus aureus

Methicillin-resistant Staphylococcus aureus (MRSA) is drug-resistant and biofilm-forming pathogenic bacteria with severe morbidity and mortality, and has been continuously detected in food products in recent years. Mannosylerythritol lipids (MELs) are novel biosurfactants and perform antibacterial property against gram-positive bacteria. Ultrasound has been applied into food sterilization as non-thermal techniques and has advantage of maintaining food nutrition and flavor over heat pasteurization. In this work, the synergistic treatment of ultrasound and MEL-A was used to combat planktonic cells and biofilm of MRSA. As a result, the combined treatment has exhibited remarkable antibacterial effect proved by enumeration of viable microbes. Furthermore, flow cytometry, scanning electron microscopy and transmission electron microscopy revealed ultrasound has enhanced the inhibitory effect of MEL-A through exacerbating cell membrane damage. On the other hand, the collaborating working modes to eradicate MRSA biofilm were disturbing cell adhesion to surface by MEL-A and destructing mature biofilm mechanically by ultrasound, reaching to over 90% of clearance rate. The findings of this study illustrated the synergistic antimicrobial mechanism of ultrasound and MEL-A treatments, and offered theoretical basis for their potential applications in food preservation.

Impact of Bacillus licheniformis SV1 Derived Glycolipid on Candida glabrata Biofilm

In the present investigation, we have evaluated the antibiofilm potential of Bacillus licheniformis SV1 derived glycolipid against C. glabrata biofilm. Impact of isolated glycolipid on the viability of C. glabrata and on inhibiting as well as eradicating ability of its biofilm were studied. Further, morphological alterations, reactive oxygen species generation (ROS) production and transcriptional expression of selected genes (RT-PCR) of C. glabrata in response with isolated glycolipid were studied. The isolated glycolipid (1.0 mg ml^-1) inhibited and eradicated C. glabrata biofilm approximately 80% and 60%, respectively. FE-SEM images revealed glycolipid exposure results in architectural alteration and eradication of C. glabrata biofilm and ROS generation. Transcriptional studies of selected genes showed that the expression of AUS1, FKS1 and KRE1 were down-regulated, while that of ergosterol biosynthesis pathway and multidrug transporter increased, in the presence of glycolipid.

Synthetic and Bio-Derived Surfactants Versus Microbial Biosurfactants in the Cosmetic Industry: An Overview

This article includes an updated review of the classification, uses and side effects of surfactants for their application in the cosmetic, personal care and pharmaceutical industries. Based on their origin and composition, surfactants can be divided into three different categories: (i) synthetic surfactants; (ii) bio-based surfactants; and (iii) microbial biosurfactants. The first group is the most widespread and cost-effective. It is composed of surfactants, which are synthetically produced, using non-renewable sources, with a final structure that is different from the natural components of living cells. The second category comprises surfactants of intermediate biocompatibility, usually produced by chemical synthesis but integrating fats, sugars or amino acids obtained from renewable sources into their structure. Finally, the third group of surfactants, designated as microbial biosurfactants, are considered the most biocompatible and eco-friendly, as they are produced by living cells, mostly bacteria and yeasts, without the intermediation of organic synthesis. Based on the information included in this review it would be interesting for cosmetic, personal care and pharmaceutical industries to consider microbial biosurfactants as a group apart from surfactants, needing specific regulations, as they are less toxic and more biocompatible than chemical surfactants having formulations that are more biocompatible and greener.

Chitosan-based nanoparticles as delivery-carrier for promising antimicrobial glycolipid biosurfactant to improve the eradication rate of Helicobacter pylori biofilm

Driven by the need to find alternatives to control H. pylori infections, this work describes the development of chitosan-PMLA nanoparticulate systems as carriers for antimicrobial glycolipid. By using a simple ionic gelation method stable nanoparticle was obtained showing an encapsulation efficiency of 73.1 ± 1.3% and an average size of 217.0 ± 15.6 nm for rhamnolipids chitosan-PMLA nanoparticles (RL-CS-NPs). Glycolipid incorporation and particle size were correspondingly corroborated by FT-IR and TEM analysis. Rhamnolipids chitosan nanoparticles (RL-CS-NPs) presented the highest antimicrobial effect towards H. pylori (ATCC 26695) exhibiting a minimal inhibitory concentration of 132 µg/mL and a biofilm inhibition ability of 99%. Additionally, RL-CS-NPs did not interfere with human fibroblasts viability and proliferation under the tested conditions. The results revealed that the RL-CS-NPs were able to inhibit bacterial growth showing adequate cytocompatibility and might become, after additional studies, a valuable approach to fight H. pylori biofilm related-infections.

Rhamnolipid the Glycolipid Biosurfactant: Emerging trends and promising strategies in the field of biotechnology and biomedicine

Rhamnolipids (RLs) are surface-active compounds and belong to the class of glycolipid biosurfactants, mainly produced from Pseudomonas aeruginosa. Due to their non-toxicity, high biodegradability, low surface tension and minimum inhibitory concentration values, they have gained attention in various sectors like food, healthcare, pharmaceutical and petrochemicals. The ecofriendly biological properties of rhamnolipids make them potent materials to be used in therapeutic applications. RLs are also known to induce apoptosis and thus, able to inhibit proliferation of cancer cells. RLs can also act as immunomodulators to regulate the humoral and cellular immune systems. Regarding their antimicrobial property, they lower the surface hydrophobicity, destruct the cytoplasmic membrane and lower the critical micelle concentration to kill the bacterial cells either alone or in combination with nisin possibly due to their role in modulating outer membrane protein. RLs are also involved in the synthesis of nanoparticles for in vivo drug delivery. In relation to economic benefits, the post-harvest decay of food can be decreased by RLs because they prevent the mycelium growth, spore germination of fungi and inhibit the emergence of biofilm formation on food. The present review focuses on the potential uses of RLs in cosmetic, pharmaceutical, food and health-care industries as the potent therapeutic agents.

Uncoupling Foam Fractionation and Foam Adsorption for Enhanced Biosurfactant Synthesis and Recovery

The production of biosurfactants is often hampered by excessive foaming in the bioreactor, impacting system scale-up and downstream processing. Foam fractionation was proposed to tackle this challenge by combining in situ product removal with a pre-purification step. In previous studies, foam fractionation was coupled to bioreactor operation, hence it was operated at suboptimal parameters. Here, we use an external fractionation column to decouple biosurfactant production from foam fractionation, enabling continuous surfactant separation, which is especially suited for system scale-up. As a subsequent product recovery step, continuous foam adsorption was integrated into the process. The configuration is evaluated for rhamnolipid (RL) or 3-(3-hydroxyalkanoyloxy)alkanoic acid (HAA, i.e., RL precursor) production by recombinant non-pathogenic Pseudomonas putida KT2440. Surfactant concentrations of 7.5 g_RL/L and 2.0 g_HAA/L were obtained in the fractionated foam. 4.7 g RLs and 2.8 g HAAs could be separated in the 2-stage recovery process within 36 h from a 2 L culture volume. With a culture volume scale-up to 9 L, 16 g RLs were adsorbed, and the space-time yield (STY) increased by 31% to 0.21 gRL/L·h. We demonstrate a well-performing process design for biosurfactant production and recovery as a contribution to a vital bioeconomy.

Exploring the potential of chitosan-based particles as delivery-carriers for promising antimicrobial glycolipid biosurfactants

Driven by the need to find alternatives to control Staphylococcus aureus infections, this work describes the development of chitosan-based particulate systems as carriers for antimicrobial glycolipids. By using a simple ionic gelation method stable nanoparticles were obtained showing an encapsulation efficiency of 41.1 ± 8.8 % and 74.2 ± 1.3 % and an average size of 210.0 ± 15.7 nm and 329.6 ± 8.0 nm for sophorolipids and rhamnolipids chitosan-nanoparticles, respectively. Glycolipids incorporation and particle size was correspondingly corroborated by FTIR-ATR and TEM analysis. Rhamnolipids chitosan nanoparticles (RLs-CS_p) presented the highest antimicrobial effect towards S. aureus (ATCC 25923) exhibiting a minimal inhibitory concentration of 130 μg/mL and a biofilm inhibition ability of 99 %. Additionally, RLs-CS_p did not interfere with human dermal fibroblasts (AG22719) viability and proliferation under the tested conditions. The results revealed that the RLs-CS_p were able to inhibit bacterial growth showing adequate cytocompatibility and might become, after additional studies, a valuable approach to prevent S. aureus related infections.

Biosurfactants as a Novel Additive in Pharmaceutical Formulations: Current Trends and Future Implications

BACKGROUND

Surfactants are an important category of additives that are used widely in most of the formulations as solubilizers, stabilizers, and emulsifiers. Current drug delivery systems comprise of numerous synthetic surfactants (such as Cremophor EL, polysorbate 80, Transcutol-P), which are associated with several side effects though used in many formulations. Therefore, to attenuate the problems associated with conventional surfactants, a new generation of surface-active agents is obtained from the metabolites of fungi, yeast, and bacteria, which are termed as biosurfactants.

OBJECTIVES

In this article, we critically analyze the different types of biosurfactants, their origin along with their chemical and physical properties, advantages, drawbacks, regulatory status, and detailed pharmaceutical applications.

METHODS

243 papers were reviewed and included in this review.

RESULTS

Briefly, Biosurfactants are classified as glycolipids, rhamnolipids, sophorolipids, trehalolipids, surfactin, lipopeptides & lipoproteins, lichenysin, fatty acids, phospholipids, and polymeric biosurfactants. These are amphiphilic biomolecules with lipophilic and hydrophilic ends and are used as drug delivery vehicles (foaming, solubilizer, detergent, and emulsifier) in the pharmaceutical industry. Despite additives, they have some biological activity as well (anti-cancer, anti-viral, anti-microbial, P-gp inhibition, etc.). These biomolecules possess better safety profiles and are biocompatible, biodegradable, and specific at different temperatures.

CONCLUSION

Biosurfactants exhibit good biomedicine and additive properties that can be used in developing novel drug delivery systems. However, more research should be driven due to the lack of comprehensive toxicity testing and high production cost which limits their use.

Biological activity of mannosylerythritol lipids on the mammalian cells

Mannosylerythritol lipids (MEL) are glycolipids mainly produced by pseudo-yeasts. These molecules present remarkable biological activities widely explored in many fields, including medicine, pharmaceuticals, and cosmetics. This review presents the main biological activity of MEL on the HL60, K562, B16, PC12, and skin cells. There is strong evidence that MEL changes the levels of glycosphingolipids of HL-60 lineage, which induce differentiation into granulocytic cells. Regarding B16 cells, MEL can trigger both apoptosis (10 μM) and cell differentiation (5 μM), in which the MEL concentration is related to each metabolic pathway. MEL can also trigger differentiation in PC12 cells due to the increase in the GalCer content. In this specific case, the effects are transient, and the differentiated cells are unstable and tend to apoptosis. MEL-B can particularly maintain skin hydration and moisture due to their self-assembled structures that resemble the tissue cells. Moreover, MEL-B repair aquaporin expression in the HaCaT keratinocytes damaged with UVA irradiation, whereas MEL-C suppresses the expression of COX-2 protein in fibroblasts, indicating that these glycolipids activate the cellular antioxidant mechanism. Recent findings denoted the anti-melanogenic activity of MEL since they suppress tyrosinase enzyme at mRNA levels in B16 and NHMs cells. MEL act effectively on mammalian cells; however, there is no clear pattern of their metabolic effects. Also, gene expression levels seem to be related to two main factors: chemical structure and concentration. However, the specific signaling cascades that are induced by MEL remain inconclusive. Thus, further investigations are vital to understanding these mechanisms clearly. KEY POINTS: • The four MEL homologs promote different biological responses in mammalian cells. • MEL modifies the pattern of glycosphingolipids in the plasma membrane of tumor cells. • Activation/deactivation of phosphorylation of serine/threonine kinase proteins.

Microbial Biosurfactants as Key Multifunctional Ingredients for Sustainable Cosmetics

A polar head and an apolar tail chemically characterize surfactants, they show different properties and are categorized by different factors such as head charge and molecular weight. They work by reducing the surface tension between oil and water phases to facilitate the formation of one homogeneous mixture. In this respect, they represent unavoidable ingredients, their main application is in the production of detergents, one of if not the most important categories of cosmetics. Their role is very important, it should be remembered that it was precisely soaps and hygiene that defeated the main infectious diseases at the beginning of the last century. Due to their positive environmental impact, the potential uses of microbial sourced surfactants are actively investigated. These compounds are produced with different mechanisms by microorganisms in the aims to defend themselves from external threats, to improve the mobility in the environment, etc. In the cosmetic field, biosurfactants, restricted in the present work to those described above, can carry high advantages, in comparison to traditional surfactants, especially in the field of sustainable and safer approaches. Besiede this, costs still remain an obsatcle to their diffusion; in this regard, exploration of possible multifunctional actions could help to contain application costs. To highlight their features and possible multifunctional role, on the light of specific biological profiles yet underestimated, we have approached the present review work.

Recent progress towards industrial rhamnolipids fermentation: Process optimization and foam control

The global market for rhamnolipids production holds great promise, and is in need of an economically viable mass-production scheme. Accordingly, several strategies have been employed to improve the efficiency of rhamnolipid production in the past few decades. Currently, rhamnolipids can be produced by Pseudomonas aeruginosa at a high yield (over 70 g/L) when vegetable oil is used as the carbon source under optimized fed-batch cultivations. However, severe foaming during rhamnolipid fermentation inhibits scaling-up and production efficiency. Stop valve was found to effective break the extremely stable rhamnolipids foams during fermentation, and production efficiency of rhamnolipids was highly improved, while its scale-up mechanism needs further study. In addition, the combination of both chemical and mechanical approaches is likely to be more efficiently resolving the foam problem existed in rhamnolipids fermentation than either chemical or mechanical methods alone.

Mannosylerythritol lipids: antimicrobial and biomedical properties

Mannosylerythritol lipids (MELs) have attracted particular interest of medical, pharmaceutical, and cosmetic fields, due to their specific characteristics, including non-toxicity, easy biodegradability, and environmental compatibility. Therefore, this review aims to highlight recent findings on MEL biological properties, focusing on issues related to therapeutic applications. Among the main findings is that MELs can play a fundamental role due to their antimicrobial properties against several nosocomial pathogen microorganisms. Other remarkable biological properties of MELs are related to skincare, as antiaging (active agent), and in particular on recover of skin cells that were damaged by UV radiation. MEL is also related to the increased efficiency of DNA transfection in liposome systems. Regarding the health field, these glycolipids seem to be associated with disturbance in the membrane composition of cancerous cells, increasing expression of genes responsible for cytoplasmic stress and apoptosis. Moreover, MELs can be associated with nanoparticles, as a capping agent, also acting to increase the solubility and cytotoxicity of them. Furthermore, the differences in the chemical structure of MEL could improve and expand their biochemical diversity and applications. Such modifications could change their interfacial properties and, thus, reduce the surface tension value, enhance the solubility, lower critical micelle concentrations, and form unique self-assembly structures. The latest is closely related to molecular recognition and protein stabilization properties of MEL, that is, essential parameters for their effective cosmetical and pharmaceutical effects. Thus, this current research indicates the huge potential of MEL for use in biomedical formulations, either alone or in combination with other molecules.