Enhanced visible-light-induced photocatalytic degradation and disinfection activities of oxidized porous g-C3N4 by loading Ag nanoparticles

Photocatalytic antibacterial agents based on inorganic semiconductor nanomaterials: a review

Microbial contamination and antibiotic pollution have threatened public health and it is important to develop a rapid and safe sterilization strategy. Among various disinfection strategies, photocatalytic antibacterial methods have drawn increasing attention due to their efficient disinfection performances and environment-friendly properties. Although there are some reviews about bacterial disinfection, specific reviews on photocatalysis focused on inorganic semiconductor nanomaterials are rarely reported. Herein, we present a systematic summary of recent disinfection developments based on inorganic nanomaterials (including metal oxides, sulfides, phosphides, carbon materials, and corresponding heterostructures) over the past five years. Moreover, key factors and challenges for inorganic nanomaterial-based photocatalytic disinfection are outlined, which holds great potential for future photocatalytic antibacterial applications.

Research status and prospect of nano silver (Ag)-modified photocatalytic materials for degradation of organic pollutants

Nano silver (Ag) was metallic Ag monomers with particle size to the nanoscale. Photocatalyst was a kind of semiconductor material with photocatalytic function. Loading precious metal Ag onto semiconductor surfaces by microwave, laser-induced, solvent-thermal and hydrothermal methods could capture photogenerated electrons, reduced the compounding rate of holes and photogenerated electrons during the photocatalytic process, thereby improving the electron transfer efficiency of photocatalysis and enhancing the absorption of visible light by silver nanoparticles through the plasma resonance effect. The highly reactive free radicals produced by photocatalysts were used in the organic degradation process to degrade organic matter into inorganic matter and was a faster, more efficient and less polluting method of pollutant degradation, which has attracted a lot of attention from researchers. This review discussed the modification of various types of photocatalysts by nano Ag through different methods. The photocatalytic degradation of dyes, antibiotics and persistent organic pollutants by different modified composites was also analyzed. This review covered the several ways and means in which nano Ag has modified diverse photocatalytic materials as well as the photocatalytic degradation of dyes, antibiotics and persistent organic pollutants. This review identified the drawbacks of the existing nano Ag-modified photocatalytic materials, including their low yield and lack of recyclability, and it also offered suggestions for potential future directions for their improvement. The purpose of this review was to further research on the technology of nano Ag-modified photocatalytic materials and to encourage the creation of new modified photocatalytic nanomaterials for the treatment of organic pollutant degradation.

An overview of nanomaterial-based novel disinfection technologies for harmful microorganisms: Mechanism, synthesis, devices and application

Harmful microorganism (e.g., new coronavirus) based infection is the most important security concern in life sciences and healthcare. This article aims to provide a state-of-the-art review on the development of advanced technology based on nanomaterial disinfection/sterilization techniques (NDST) for the first time including the nanomaterial types, disinfection techniques, bactericidal devices, sterilization products, and application scenarios (i.e., water, air, medical healthcare), with particular brief account of bactericidal behaviors referring to varied systems. In this emerging research area spanning the years from 1998 to 2021, total of ~200 publications selected for the type of review paper and research articles were reviewed. Four typical functional materials (namely type of metal/metal oxides, S-based, C-based, and N-based) with their development progresses in disinfection/sterilization are summarized with a list of synthesis and design. Among them, the widely used silver nanoparticles (AgNPs) are considered as the most effective bacterial agents in the type of nanomaterials at present and has been reported for inactivation of viruses, fungi, protozoa. Some methodologies against (1) disinfection by-products (DBPs) in traditional sterilization, (2) noble metal nanoparticles (NPs) agglomeration and release, (3) toxic metal leaching, (4) solar spectral response broadening, and (5) photogenerated e^-/h⁺ pairs recombination are reviewed and discussed in this field, namely (1) alternative techniques and nanomaterials, (2) supporter anchoring effect, (3) nonmetal functional nanomaterials, (4) element doping, and (5) heterojunction constructing. The feasible strategies in the perspective of NDST are proposed to involve (1) non-noble metal disinfectors, (2) multi-functional nanomaterials, (3) multi-component nanocomposite innovation, and (4) hybrid techniques for disinfection/sterilization system. It is promising to achieve 100% bactericidal efficiency for 10⁸ CFU/mL within a short time of less than 30 min.

Template-Free Synthesis of g-C3N4 Nanoball/BiOCl Nanotube Heterojunction with Enhanced Photocatalytic Activity

There are many reports on g-C3N4 nanosheet and BiOCl nanosheet, but few studies on other morphologies of g-C3N4 and BiOCl. Herein, a g-C3N4 nanoball/BiOCl nanotube heterojunction prepared by a simple one-step acetonitrile solvothermal method is reported. The XRD results prove that the g-C3N4/BiOCl composites can be prepared in one step. SEM results revealed that the g-C3N4 was spherical and the BiOCl was tubular. The HRTEM results indicate that g-C3N4 has an amorphous structure and that the (100) crystal plane of BiOCl borders the g-C3N4. Spherical g-C3N4 has a narrow band gap (approximately 1.94 eV), and the band gap of g-C3N4/BiOCl after modification was also narrow. When the BiOCl accounted for 30% of the g-C3N4/BiOCl by mass, the quasi-primary reaction rate constant of RhB degradation was 45 times that of g-C3N4. This successful preparation method for optimizing g-C3N4 involving simple one-step template-free synthesis may be adopted for the preparation of diverse-shapes and high-performance nanomaterials in the future.

Aptamer-Based Fluorescence Detection and Selective Disinfection of Salmonella Typhimurium by Using Hollow Carbon Nitride Nanosphere

Hollow carbon nitride nanosphere (HCNS) was synthesized via the hard template method to improve the fluorescence characteristics, drug delivery ability, and photocatalytic activity. Blue fluorescent HCNS was utilized as a quenching agent and an internal reference to combine with Cy5-labelled aptamer (Cy5-Apt), resulting in an off-on fluorescence aptasensing method for the detection of Salmonella typhimurium (S. typhimurium). Under optimum conditions, this fluorescence assay presented a linear range from 30 to 3 × 10⁴ CFU mL^-1 with a detection limit of 13 CFU mL^-1. In addition, HCNS was also used as a drug carrier to load chloramphenicol (Cap) molecules. The Cap-loading amount of HCNS could reach 550 μg mg^-1 within 24 h, whereas the corresponding Cap-release amount is 302.5 μg mg^-1 under acidic and irradiation conditions. The integration of photocatalyst with antibiotic could endow HCNS-Cap with better disinfection performance. The bactericidal efficiency of HCNS-Cap (95.0%) against S. typhimurium within 12 h was better than those of HCNS (85.1%) and Cap (72.9%). In addition, selective disinfection of S. typhimurium was further realized by decorating aptamer. Within 4 h, almost all S. Typhimurium were inactivated by HCNS-Cap-Apt, whereas only 13.3% and 48.2% of Staphylococcus aureus and Escherichia coli cells were killed, respectively. Therefore, HCNS is a promising bio-platform for aptamer-based fluorescence detection and selective disinfection of S. typhimurium.

Facile Synthesis, Characterization, and Photocatalytic Activity of Hydrothermally Grown Cu2+-Doped ZnO–SnS Nanocomposites for MB Dye Degradation

The morphology, chemical composition, and doping process of metal oxides and sulfides play a significant role in their photocatalytic performance under solar light illumination. We synthesized Cu2+-doped ZnO–SnS nanocomposites at 220 °C for 10 h, using hydrothermal methods. These nanocomposites were structurally, morphologically, and optically characterized using various techniques, including powder X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV-visible absorption spectroscopy. Their photocatalytic activity (PCA) on methylene blue (MB) pollutant dye was examined under 150 W solar light illumination. Mixed-phase abundances with hexagonal ZnO and orthorhombic SnS structures were observed. TEM micrographs showed changes in morphology from spherical to nano-flake structures with an increasing doping concentration. XPS indicated the chemical states of the constituent elements in the nanocomposites. UV-visible absorption spectroscopy showed a decrease in the bandgap with an increasing doping concentration. Strong PCA was observed due to the separation of charge carriers, a change in bandgap, and a high light absorption ability under solar light irradiation. The measured photodegradation efficiency of the MB dye was approximately 97% after 2 h. The movement of the charge carriers and the bandgap alignment of the synthesized composites are briefly discussed.

Recent Advances in g-C3 N4 -Based Photocatalysts for Pollutant Degradation and Bacterial Disinfection: Design Strategies, Mechanisms, and Applications

Emerging photocatalytic technology promises to provide an effective solution to the global energy crisis and environmental pollution. Graphite carbon nitride (g-C₃ N₄ ) has gained extensive attention in the scientific community due to its excellent physical and chemical properties, attractive electronic band structure, and low cost. In this paper, research progress in design strategies for g-C₃ N₄ -based photocatalysts in the past five years is reviewed from the perspectives of nanostructure construction, element doping, and heterostructure construction. To clarify the relationship between application requirements and structural design, variations in the morphology, electronic energy band structure, light absorption capacity, as well as interfacial charge transfer caused by various modification strategies are discussed in detail. The recent applications of g-C₃ N₄ -based photocatalysts for pollutant degradation and bacterial disinfection are reviewed, as well as the antimicrobial activity and degradation mechanisms. Finally, current challenges and future development directions for the practical application of g-C₃ N₄ -based photocatalysts are tentatively discussed.

Recent progress of silver-containing photocatalysts for water disinfection under visible light irradiation: A review

Photocatalysis has emerged as an environmentally friendly approach for microbial disinfection. The development of visible-light-driven (VLD) photocatalysts for water pollution remediation is imperative, considering that visible light constitutes a substantial fraction of the solar spectrum. The modification of photocatalysts by Ag/AgX (X = Cl, Br, I) deposition can be used to improve photocatalytic efficiencies. This is achieved by preventing photogenerated electron-hole pairs recombination through electron trapping mechanisms. With the introduction of silver NPs, visible light absorption can also be increased through its SPR enhancement. Silver also possesses excellent antimicrobial properties. Consequently, a novel class of Ag/AgX-containing hybrid materials has recently emerged as a promising candidate for water disinfection. This review summarizes the latest advances in the synthesis of Ag/AgX-containing photocatalysts using various synthetic methods. The microbial disinfection efficiencies of the as-prepared materials, the main reactive oxygen species and disinfection mechanisms are also reviewed in detail. Finally, some areas that need to be improved are discussed along with new insights as perspectives for future developments in this field.

Progress on photocatalytic semiconductor hybrids for bacterial inactivation

Due to its use of green and renewable energy and negligible bacterial resistance, photocatalytic bacterial inactivation is to be considered a promising sterilization process. Herein, we explore the relevant mechanisms of the photoinduced process on the active sites of semiconductors with an emphasis on the active sites of semiconductors, the photoexcited electron transfer, ROS-induced toxicity and interactions between semiconductors and bacteria. Pristine semiconductors such as metal oxides (TiO₂ and ZnO) have been widely reported; however, they suffer some drawbacks such as narrow optical response and high photogenerated carrier recombination. Herein, some typical modification strategies will be discussed including noble metal doping, ion doping, hybrid heterojunctions and dye sensitization. Besides, the biosafety and biocompatibility issues of semiconductor materials are also considered for the evaluation of their potential for further biomedical applications. Furthermore, 2D materials have become promising candidates in recent years due to their wide optical response to NIR light, superior antibacterial activity and favorable biocompatibility. Besides, the current research limitations and challenges are illustrated to introduce the appealing directions and design considerations for the future development of photocatalytic semiconductors for antibacterial applications.

An innovative, highly stable Ag/ZIF-67@GO nanocomposite with exceptional peroxymonosulfate (PMS) activation efficacy, for the destruction of chemical and microbiological contaminants under visible light

In this work, Ag nanoparticles were loaded on ZIF-67 covered by graphene oxide (Ag/ZIF-67@GO), and its catalytic performance was studied for the heterogeneous activation of peroxymonosulfate (PMS) under visible-light. The catalyst surface morphology and structure were analyzed by FT-IR, XRD, XPS, DRS, FE-SEM, EDX, TEM, BET, ICP-AES and TGA analysis. The efficacy of PMS activation by the Ag/ZIF-67@GO under visible light was assessed by phenol degradation and E. coli inactivation. Phenol was completely degraded within 30 min by HO^•, SO₄^•- and O₂^•- generated through the photocatalytic PMS activation. In addition, total E. coli inactivation was attained in 15 min that confirmed the highly efficient catalytic activation of PMS by the as-made nanocomposite under visible light. The reaction mechanism was elucidated and the importance of the generated reactive species followed the order of: HO^• > SO₄^•- > O₂^•- > h⁺, implying a radical-pathway dominated process.

Recent advances in graphite carbon nitride-based nanocomposites: structure, antibacterial properties and synergies

Bacterial infections and transmission threaten human health and well-being. Graphite carbon nitride (g-C₃N₄), a promising photocatalytic antibacterial nanomaterial, has attracted increasing attention to combat bacterial transmission, due to the outstanding stability, high efficiency and environmental sustainability of this material. However, the antibacterial efficiency of g-C₃N₄ is affected by several factors, including its specific surface area, rapid electron/hole recombination processes and optical absorption properties. To improve the efficiency of the antibacterial properties of g-C₃N₄ and extend its range of applications, various nanocomposites have been prepared and evaluated. In this review, the advances in amplifying the photocatalytic antibacterial efficiency of g-C₃N₄-based nanocomposites is discussed, including different topologies, noble metal decoration, non-noble metal doping and heterojunction construction. The enhancement mechanisms and synergistic effects in g-C₃N₄-based nanocomposites are highlighted. The remaining challenges and future perspectives of antibacterial g-C₃N₄-based nanocomposites are also discussed.

Construction of Ag2O-modified g-C3N4 photocatalyst for rapid visible light degradation of ofloxacin

The design of stable and highly efficient photocatalysts had emerged as an economic and promising way for eliminating harmful pharmaceutical pollutants. In this study, a series of Ag₂O-modified g-C₃N₄ composites with different Ag₂O amounts (denoted as Ag₂O-CN_x) were fabricated via a facile reflux condensation methodology. Ofloxacin (OFL) was chosen as a model pollutant to evaluate the degradation efficiency of the photocatalytic system. The optimal photocatalytic activity was achieved with Ag₂O-CN_1.0, which reached up to 99.1% removal of OFL after 15-min reaction and the pseudo-first-order constant was 0.469 min^-1, approximately 42 times higher than that of g-C₃N₄. Considering the complexity of the actual environment, the important influential factors such as catalyst dosage, initial OFL concentration, solution pH, and natural organic matter on the OFL degradation were systematically investigated. Additionally, Ag₂O-CN_1.0 showed good stability and recyclability in multiple cycle experiments. The feasible photodegradation mechanism of OFL was proposed with radical scavenger experiments, and the degradation products were determined. Furthermore, the enhanced photocatalytic activity could be ascribed to not only the high photogenerated charge separation efficiency and the surface plasmon resonance effect of metallic Ag, but also the p-n heterojunction formed between Ag₂O and g-C₃N₄. Therefore, Ag₂O-CN_1.0 was a treatment material possessing great application prospects for eliminating OFL in wastewater.

Disinfection of Wastewater by UV-Based Treatment for Reuse in a Circular Economy Perspective. Where Are We at?

Among the critical issues that prevent the reuse of wastewater treatment plants (WWTPs) effluents in a circular economy perspective, the microbiological component plays a key role causing infections and diseases. To date, the use of conventional chemical oxidants (e.g., chlorine) represent the main applied process for wastewater (WW) disinfection following a series of operational advantages. However, toxicity linked to the production of highly dangerous disinfection by-products (DBPs) has been widely demonstrated. Therefore, in recent years, there is an increasing attention to implement sustainable processes, which can simultaneously guarantee the microbiological quality of the WWs treated and the protection of both humans and the environment. This review focuses on treatments based on ultraviolet radiation (UV) alone or in combination with other processes (sonophotolysis, photocatalysis and photoelectrocatalysis with both natural and artificial light) without the dosage of chemical oxidants. The strengths of these technologies and the most significant critical issues are reported. To date, the use of synthetic waters in laboratory tests despite real waters, the capital and operative costs and the limited, or absent, experience of full-scale plant management (especially for UV-based combined processes) represent the main limits to their application on a larger scale. Although further in-depth studies are required to ensure full applicability of UV-based combined processes in WWTPs for reuse of their purified effluents, excellent prospects are presented thanks to an absent environmental impact in terms of DBPs formation and excellent disinfection yields of microorganisms (in most cases higher than 3-log reduction).

Multi-component design and in-situ synthesis of visible-light-driven SnO2/g-C3N4/diatomite composite for high-efficient photoreduction of Cr(VI) with the aid of citric acid

A novel ternary SnO₂/g-C₃N₄/diatomite (SCN/DE) nanocomposite was rationally designed and successfully synthesized via a two-step method with in-situ polymerization and self-assembling. Under visible light illumination, the resulting SCN/DE composite exhibited superior photocatalytic performance and good reusability for the photoreduction of Cr(VI) to Cr(III) in the presence of citric acid, the apparent rate constant of SCN/DE composite was up to around 22.68 times, 13.53 times and 8.65 times as much as those of g-C₃N₄ (CN), g-C₃N₄/diatomite (CN/DE) and SnO₂/g-C₃N₄ (SCN) composites, respectively. The citric acid is a co-catalyst (chelating agent) rather than a reactant during the reactive process. Besides, the intimate interface contact and ternary heterogeneous structure were established among the SnO₂, g-C₃N₄ and diatomite. The induced positive charged surface of diatomite should be the key factor in enhancing photoactivity of the resultant SCN/DE composite, which significantly accelerated the charge separation of photogenerated electron-hole pairs as well as improved the adsorption performance towards Cr (VI). In particular, a possible reduction pathway of Cr(VI) to Cr(III) by SCN/DE composite with the assistance of citric acid was first investigated and proposed. This work provides a novel strategy for synthesizing highly efficient mineral-based photocatalysts with great promising application foreground for Cr(VI)-containing wastewater treatment.

Electron beam irradiation for the formation of thick Ag film on Ag3PO4

This study demonstrates that the electron beam irradiation of materials, typically used in characterization measurements, could be employed for advanced fabrication, modification, and functionalization of composites. We developed irradiation equipment using an electron beam irradiation source to be applied in materials modification. Using this equipment, the formation of a thick Ag film on the Ag₃PO₄ semiconductor is carried out by electron beam irradiation for the first time. This is confirmed by various experimental techniques (X-ray diffraction, field-emission scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy) and ab initio molecular dynamics simulations. Our calculations demonstrate that, at the earlier stages, metallic Ag growth is initiated preferentially at the (110) surface, with the reduction of surface Ag cations forming metallic Ag clusters. As the (100) and (111) surfaces have smaller numbers of exposed Ag cations, the reductions on these surfaces are slower and are accompanied by the formation of O₂ molecules.

This study demonstrates that the electron beam irradiation of materials, typically used in characterization measurements, could be employed for advanced fabrication, modification, and functionalization of composites.

Enhanced photocatalytic removal of amoxicillin with Ag/TiO2/mesoporous g-C3N4 under visible light: property and mechanistic studies

In present study, an efficient ternary Ag/TiO₂/mesoporous g-C₃N₄ (M-g-C₃N₄) photocatalyst was successfully synthesized through depositing Ag nanoparticles (NPs) on the surface of TiO₂/M-g-C₃N₄ heterojunction. Ag/TiO₂/M-g-C₃N₄ nanocomposite displayed the highest degradation efficiency for amoxicillin (AMX) compared to TiO₂/M-g-C₃N₄ heterojunction, M-g-C₃N₄, and bulk-g-C₃N₄ (B-g-C₃N₄). The removal efficiency of AMX in real situation, surface water (SW), hospital wastewater (HW), and waste water treatment plant (WWTP) also were studied to illustrate the effectiveness of Ag/TiO₂/M-g-C₃N₄ photocatalysts. The vulnerable atoms in AMX structure were revealed through DFT calculation. Additionally, the dominating active groups produced in time of the photocatalytic procedure were determined on account of free radical trapping experiments and ESR spectra. The mechanism of photocatalytic degradation was proposed and verified. The transfer of the electrons and the inhibition of the recombination of photogenerated electron-holes were enhanced effectively under the synergistic effect of the Ag NPs and TiO₂. As a consequence, the catalytic activity of the composite was improved under visible light.

Promoting Photodegradation Efficiency via a Heterojunction Photocatalyst Combining with Oxygen Direct and Fast Diffusion from the Gas Phase to Active Catalytic Sites

The low solubility of oxygen in solution is the main obstacle for the biodegradation of organic pollutants in wastewater. To address this problem, inspired by the degradation mechanism of aerobic bacteria toward organic pollutants, a novel photodegradation system was presented and operated by a heterojunction photocatalyst combining with a hydrophobic triphase interface, allowing oxygen to directly diffuse from the gas phase to active catalytic sites submersed in polluted solutions. Especially, the heterojunction photocatalyst was fabricated by graphitic carbon nitride nanosheets (C₃N₄ NS) sensitized with 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin (TCPP). The resulting photocatalyst was coated on a certain part of the commercial superhydrophobic carbon paper (CP) and submersed in the polluted wastewater, while the other part of hydrophobic CP (without coating with C₃N₄-TCPP nanocomposite) was exposed to air to form a gas-liquid-solid tri-phase photodegradation system. With this system, the photodegradation rate was 10-fold higher than that of a conventional liquid/solid diphase system in oxygen-saturated solutions. This was, on one hand, due to the abundant oxygen on the surface of a photocatalyst coming from the fast and direct diffusion from the gas phase through the superhydrophobic nanoporous part of CP. On the other hand, the hybrid C₃N₄-TCPP nanocomposite enhanced the light absorption efficiency under simulated sunlight irradiation and restrained the recombination of photogenerated electron-hole. Moreover, the triphase photodegradation system was stable in aqueous solutions for a long time and can be reused almost without attenuation for five cycles, which provided a great potential to be utilized for practical wastewater treatment.

A re-circulating horizontal flow constructed wetland for the treatment of synthetic azo dye at high concentrations

A re-circulating horizontal flow constructed wetland (RHFCW) system was developed in a greenhouse. This system was operated with Typha domingensis to study the phytoremediation capacity of this macrophyte species in different developing stages for synthetic textile wastewater with the pollutant type, the amaranth (AM) azo dye. Experiments were applied with a fixed flow rate Q = 10 L/h corresponding to a theoretical residence time of 3 h. The synthetic feeding to the RHFCW container was re-circulated back until the required water quality was achieved. The performance of this pilot-scale system was compared to an unplanted RHFCW. The effect of the initial dye concentration was studied using four dye concentrations (10, 15, 20, and 25 mg/L). The following parameters pH, color, COD, BOD₅, NO₃^-, NO2^-, and NH₄⁺ were monitored during treatment. The maximum efficiencies obtained for discoloration, COD, NO₃^-, and NH₄⁺ were 92 ± 0.14%, 56 ± 1.12%, 92 ± 0.34%, and 97 ± 0.17% respectively. Experiences demonstrate a decrease of removal efficiencies of studied parameters with the increase of dye concentrations, leading to an increase of the duration of treatment. Changes in activities of antioxidant enzymes (superoxide dismutase (SOD), guaiacol peroxidase (GPX), catalase (CAT), ascorbic peroxidase (APX), and glutathione reductase (GR)) and their relation to plant defense system against stress were studied. Enzymes were evaluated in leaves of T. domingensis during the remediation of the azo dye (amaranth). During treatment, an increase of enzymes activities was observed in accordance with the high removal efficiency.