Decorating (001) dominant anatase TiO2 nanoflakes array with uniform WO3 clusters for enhanced photoelectrochemical water decontamination

Synergistic effects of nano-structured WO3-Se heterojunction decorated by organic Nafion layer on improving photoelectrochemical performance

Exploration of high-performance photoanodes is considered as an essential challenge in photoelectrochemical (PEC) water splitting due to the complex four-electron reaction in water oxidation. Herein, the nano-structured WO₃-Se heterojunction decorated by organic Nafion layer is designed. The optimized WO₃-Se200-0.05Nafion photoanode shows a remarkable photocurrent of 1.40 mA cm^-2at 1.23 V versus reversible hydrogen electrode, which is 2.5-fold higher than that of pure WO₃nanosheets (WO₃NS) photoelectrode. Remarkably, the photocurrent increments of WO₃-Se200-0.05Nafion is larger than the increment sum of WO₃-Se200 and WO₃-0.05Nafion, which affirming the synergistic effect of Se nanospheres and Nafion layer. The improved PEC performances are attributed to the quick charge separation and transfer, the increased electric conductivity, and the excellent kinetics of oxygen evolution, which is derived from the strong interaction among WO₃, Se and Nafion. Meanwhile, the better visible-light harvesting from Se nanospheres as photosensitizer and the induction of transparent Nafion as a passivation layer can explain this synergy. It hopes this heterostructure design with organic Nafion decoration can inspire to exploit outstanding performance photoanodes for PEC water splitting.

Application of visible light active photocatalysis for water contaminants: A review

Organic water pollutants are ubiquitous in the natural environment arising from domestic products as well as current and legacy industrial processes. Many of these organic water pollutants are recalcitrant and only partially degraded using conventional water and wastewater treatment processes. In recent decades, visible light active photocatalyst has gained attention as a non-conventional alternative for the removal of organic pollutants during water treatment, including industrial wastewater and drinking water treatment. This paper reviews the current state of research on the use of visible light active photocatalysts, their modified methods, efficacy, and pilot-scale applications for the degradation of organic pollutants in water supplies and waste streams. Initially, the general mechanism of the visible light active photocatalyst is evaluated, followed by an overview of the major synthesis techniques. Because few of these photocatalysts are commercialized, particular attention was given to summarizing the different types of visible light active photocatalysts developed to the pilot-scale stage for practical application and commercialization. The organic pollutant degradation ability of these visible light active photocatalysts was found to be considerable and in many cases comparable with existing and commercially available advanced oxidation processes. Finally, this review concludes with a summary of current achievements and challenges as well as possible directions for further research. PRACTITIONER POINTS: Visible light active photocatalysis is a promising advanced oxidation process (AOP) for the reduction of organic water pollutants. Various mechanisms of photocatalysis using visible light active materials are identified and discussed. Many recent photocatalysts are synthesized from renewable materials that are more sustainable for applications in the 21st century. Only a small number of pilot-scale applications exist and these are outlined in this review.

Polymer-based immobilized Fe2O3-TiO2/PVP catalyst preparation method and the degradation of triclosan in treated greywater effluent by solar photocatalysis

The present study involves a novel protocol to develop a ternary composite catalyst for an effective post-treatment technique for greywater. The ternary film of Fe₂O₃-TiO₂/polyvinyl pyrrolidine (PVP) is coated on a glass tube using spray coating with annealing at 320 °C. The structure, thermal, microstructure, and surface properties of the coated film are characterized by X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), and Thermo Gravimetric Analysis (TGA). The scratch hardness of photocatalysts at different Fe₂O₃/TiO₂ compositions is investigated based on the width measurement of scratch using FESEM analysis. Results show that at an optimum coating of 5% of Fe₂O₃/TiO₂ composition catalytic film, the maximum scratch hardness (7.984 GPa) is obtained. Also, the photocatalyst has the highest cohesive bond strength and wearing resistance. The degradation of triclosan (TCS) in treated greywater, discharged from the anaerobic-aerobic treatment system, is investigated at a lab-scale using a solar photocatalytic reactor. The response surface analysis has been performed from the different sets of experimental trials for various optimal parameters. It is observed that the TCS degradation efficiency of 83.27% has resulted under optimum conditions.

Novel green synthesis of S-doped TiO2 nanoparticles using Malva parviflora plant extract and their photocatalytic, antimicrobial and antioxidant activities under sunlight illumination

Visible-light-responsible S-doped TiO₂(GST) nanoparticles (NPs) are synthesized via sol-gel process, and an aqueous extract of Malva parviflora (MP) plant is used as the green and versatile medium with excellent reducing and capping properties to facilitate the S-doping and crystal growth of anatase. Compared with the counterpart (CST) derived from the conventional organic solvent. GST show a smaller average particle size (20.3 vs. 29.5 nm) with a larger surface area (135 vs 95 m²/g), together with the more significant red shift to longer wavelength in the visible light region. XPS analysis shows Ti⁴⁺ cations are substituted by S⁶⁺ ions into the lattice structure of TiO₂ for both samples. The photodynamics of CST and GST catalysts are examined by electron paramagnetic resonance (EPR) spectroscopy, which shows the surface Ti³⁺ sites can be oxidized easily by the surface adsorbed O₂ molecules, forming O^2- radicals. Their photocatalytic activities (PCA) are evaluated by degrading methyl orange (MO) dye under the visible light irradiation. GST exhibit higher PCA in MO bleaching and chemical oxygen demand (COD) reduction. In addition, antimicrobial and antioxidant assays of CST and GST NPs also show that the irradiated NPs samples show higher antibacterial activities. GST NPs have a higher antibacterial activity than CST NPs against all tested bacteria and the minimum inhibitory concentration (MIC) is optimized to 25 μg/mL. The in-vitro antioxidant activity evaluated by the radical cation de-colorization test using 1,1-diphenyl-2-picrylhydrazyl (DPPH) further demonstrates that GST NPs give a better antioxidant activity.

Creating self-assembled arrays of mono-oxo (MoO3)1 species on TiO2(101) via deposition and decomposition of (MoO3)n oligomers

Hierarchically ordered oxides are of critical importance in material science and catalysis. Unfortunately, the design and synthesis of such systems remains a key challenge to realizing their potential. In this study, we demonstrate how the deposition of small oligomeric (MoO3)1-6 clusters-formed by the facile sublimation of MoO3 powders-leads to the self-assembly of locally ordered arrays of immobilized mono-oxo (MoO3)1 species on anatase TiO2(101). Using both high-resolution imaging and theoretical calculations, we reveal the dynamic behavior of the oligomers as they spontaneously decompose at room temperature, with the TiO2 surface acting as a template for the growth of this hierarchically structured oxide. Transient mobility of the oligomers on both bare and (MoO3)1-covered TiO2(101) areas is identified as key to the formation of a complete (MoO3)1 overlayer with a saturation coverage of one (MoO3)1 per two undercoordinated surface Ti sites. Simulations reveal a dynamic coupling of the reaction steps to the TiO2 lattice fluctuations, the absence of which kinetically prevents decomposition. Further experimental and theoretical characterizations demonstrate that (MoO3)1 within this material are thermally stable up to 500 K and remain chemically identical with a single empty gap state produced within the TiO2 band structure. Finally, we see that the constituent (MoO3)1 of this material show no proclivity for step and defect sites, suggesting they can reliably be grown on the (101) facet of TiO2 nanoparticles without compromising their chemistry.

Mesoporous WO3/TiO2 spheres with tailored surface properties for concurrent solar photocatalysis and membrane filtration

The strategical integration of membrane water filtration with semiconductor photocatalysis presents a frontier in deep purification with a self-cleaning capability. However, the membrane fouling caused by the cake layer of the reclaimed TiO₂ nanoparticles is a key obstacle. Herein, mesoporous WO₃/TiO₂ spheres (∼450 nm in diameter) consisting of numerous self-assembled WO₃-decoated anatase TiO₂ nanocrystallites are successfully prepared via a facile wet-chemistry route. The decoration of monolayered WO₃ significantly affects the surface, photocatalytic, and optical properties of original mesoporous TiO₂ spheres. XRD and Raman analyses show the presence of monolayered WO₃ suppresses the crystal growth of TiO₂ during the calcination process, significantly improves the surface acidity, and causes an obvious red shift in absorption edge. These favorable textural properties, coupling the enhanced interfacial charge carrier separation, render mesoporous WO₃/TiO₂ spheres with a superior photocatalytic activity in degradation of methylene blue under UV, visible, and solar light irradiations. The optimal molar ratio of W/Ti is examined to 6%. The synthesized mesoporous WO₃/TiO₂ spheres also show much higher flux during membrane filtration in both dead-end and cross-flow modes, suggesting a promising photocatalyst for concurrent membrane filtration and solar photocatalysis.

Hazardous wastes treatment technologies

A review of the literature published in 2019 on topics related to hazardous waste management in water, soils, sediments, and air. The review covered treatment technologies applying physical, chemical, and biological principles for the remediation of contaminated water, soils, sediments, and air. PRACTICAL POINTS: This report provides a review of technologies for the management of waters, wastewaters, air, sediments, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) in three scientific areas of physical, chemical, and biological methods. Physical methods for the management of hazardous wastes including general adsorption, sand filtration, coagulation/flocculation, electrodialysis, electrokinetics, electro-sorption ( capacitive deionization, CDI), membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, potassium permanganate processes, and Fenton and Fenton-like process were reviewed. Biological methods such as aerobic, anoxic, anaerobic, bioreactors, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed. Case histories were reviewed in four areas including contaminated sediments, contaminated soils, mixed industrial solid wastes and radioactive wastes.

Molecularly imprinted carbon nanosheets supported TiO2: Strong selectivity and synergic adsorption-photocatalysis for antibiotics removal

In order to achieve strong specific recognition and remarkable synergy between adsorption and photocatalysis, carbon nanosheets supported TiO₂ (CT) was designed and embellished by molecular imprinting technology with ciprofloxacin (CIP) as template. The molecular imprinted CT (CT-MI) product exhibited remarkable synergy of adsorption-photocatalysis and high selectivity in both aspects, benefitted from specific recognition of imprinted layer, strong carbon adsorption and electroconductivity, and enhanced photocatalysis. Compared to the competitive pollutant, sulfamethoxazole (SMZ) in this study, selectivity coefficient was 7.2 for adsorption and 3.2 for photocatalysis, respectively. This is superior to most of the imprinted photocatalysts reported in the literature. In addition, effect of mass ratio between TiO₂ matrix to imprinted polymers, as well as water quality and composition, to the performance of final product was studied and favorable conditions were proposed. Electron transfer mode, selective recognition mode, and antibiotics degradation mechanism and pathways were also illustrated based on trapping experiments and HPLC-MS technology etc. This study confirmed that alliance between molecular imprinting, carbon nanosheets and well dispersed photocatalyst possessed broad prospect of applications in specific recognition and selective degradation of a highly toxic pollutant in a variety of mixed systems.