Creating and mastering nano-objects to design advanced catalytic materials

Opportunities and Challenges of Metal-Organic Framework Micro/Nano Reactors for Cascade Reactions

Building bridges among different types of catalysts to construct cascades is a highly worthwhile pursuit, such as chemo-, bio-, and chemo-bio cascade reactions. Cascade reactions can improve the reaction efficiency and selectivity while reducing steps of separation and purification, thereby promoting the development of "green chemistry". However, compatibility issues in cascade reactions pose significant constraints on the development of this field, particularly concerning the compatibility of diverse catalyst types, reaction conditions, and reaction rates. Metal-organic framework micro/nano reactors (MOF-MNRs) are porous crystalline materials formed by the self-assembly coordination of metal sites and organic ligands, possessing a periodic network structure. Due to the uniform pore size with the capability of controlling selective transfer of substances as well as protecting active substances and the organic-inorganic parts providing reactive microenvironment, MOF-MNRs have attracted significant attention in cascade reactions in recent years. In this Perspective, we first discuss how to address compatibility issues in cascade reactions using MOF-MNRs, including structural design and synthetic strategies. Then we summarize the research progress on MOF-MNRs in various cascade reactions. Finally, we analyze the challenges facing MOF-MNRs and potential breakthrough directions and opportunities for the future.

Quantum Dot Transfer from the Organic Phase to Acrylic Monomers for the Controlled Integration of Single-Photon Sources by Photopolymerization

This paper reports on a new strategy for obtaining homogeneous dispersion of grafted quantum dots (QDs) in a photopolymer matrix and their use for the integration of single-photon sources by two-photon polymerization (TPP) with nanoscale precision. The method is based on phase transfer of QDs from organic solvents to an acrylic matrix. The detailed protocol is described, and the corresponding mechanism is investigated and revealed. The phase transfer is done by ligand exchange through the introduction of mono-2-(methacryloyloxy) ethyl succinate (MES) that replaces oleic acid (OA). Infrared (IR) measurements show the replacement of OA on the QD surface by MES after ligand exchange. This allows QDs to move from the hexane phase to the pentaerythritol triacrylate (PETA) phase. The QDs that are homogeneously dispersed in the photopolymer without any clusterization do not show any significant broadening in their photoluminescence spectra even after more than 3 years. The ability of the hybrid photopolymer to create micro- and nanostructures by two-photon polymerization is demonstrated. The homogeneity of emission from 2D and 3D microstructures is confirmed by confocal photoluminescence microscopy. The fabrication and integration of a single-photon source in a spatially controlled manner by TPP is achieved and confirmed by auto-correlation measurements.

Recent Advances in One-Dimensional Micro/Nanomotors: Fabrication, Propulsion and Application

Due to their tiny size, autonomous motion and functionalize modifications, micro/nanomotors have shown great potential for environmental remediation, biomedicine and micro/nano-engineering. One-dimensional (1D) micro/nanomotors combine the characteristics of anisotropy and large aspect ratio of 1D materials with the advantages of functionalization and autonomous motion of micro/nanomotors for revolutionary applications. In this review, we discuss current research progress on 1D micro/nanomotors, including the fabrication methods, driving mechanisms, and recent advances in environmental remediation and biomedical applications, as well as discuss current challenges and possible solutions. With continuous attention and innovation, the advancement of 1D micro/nanomotors will pave the way for the continued development of the micro/nanomotor field.

Use of heterogeneous catalysis in sustainable biofuel production

Biofuel is a sustainable energy source that may use to replace fossil-based carbon dioxide and mitigate the adverse effects of exhaust emissions. Nowadays, we need to replace petroleum fuels with alternatives from environmentally sustainable sources of increasing importance. Biofuels derived from biomass have gained considerable attention, and thus most of the traditional methods that harm the environment and humans have retreated. Developing an active and stable heterogeneous catalyst is a step of utmost importance in the renewable liquid fuel technology. Thus, there is a great interest in developing methods for producing liquid fuels from non-edible sources. It may also be from dry plant tissues such as agricultural waste. Lignocellulosic biomass can be a sustainable source for producing renewable fuels and chemicals, as well as the replacement of petroleum products. Hence, the researchers aspired to synthesize new catalysts using a cheap technology developed to hydrolyze cellulose and then produce bioethanol without needing expensive enzymes, which may ultimately lead to a lower fuel price. In this paper, we will focus on the recent technologies used to produce sustainable biofuels through inexpensive incentives and innocuous to the environment.

Vectorial Catalysis in Surface-Anchored Nanometer-Sized Metal-Organic Frameworks-Based Microfluidic Devices

Vectorial catalysis-controlling multi-step reactions in a programmed sequence and by defined spatial localization in a microscale device-is an enticing goal in bio-inspired catalysis research. However, translating concepts from natural cascade biocatalysis into artificial hierarchical chemical systems remains a challenge. Herein, we demonstrate integration of two different surface-anchored nanometer-sized metal-organic frameworks (MOFs) in a microfluidic device for modelling vectorial catalysis. Catalyst immobilization at defined sections along the microchannel and a two-step cascade reaction was conducted with full conversion after 30 seconds and high turnover frequencies (TOF≈105  h-1 ).

Peptide Gelators to Template Inorganic Nanoparticle Formation

The use of peptides to template inorganic nanoparticle formation has attracted great interest as a green route to advance structures with innovative physicochemical properties for a variety of applications that range from biomedicine and sensing, to catalysis. In particular, short-peptide gelators offer the advantage of providing dynamic supramolecular environments for the templating effect on the formation of inorganic nanoparticles directly in the resulting gels, and ideally without using further reductants or chemical reagents. This mini-review describes the recent progress in the field to outline future research directions towards dynamic functional materials that exploit the synergy between supramolecular chemistry, nanoscience, and the interface between organic and inorganic components for advanced performance.

Enhancing N2 Fixation Activity by Converting Ti3 C2 MXenes Nanosheets to Nanoribbons

Metal carbides M₂ C (MXenes) with two-dimensional (2D) structure have been indicated as promising materials for N₂ fixation, with the activity being related to edge planes. Here, it is instead demonstrated that the transformation from a 2D- (nanosheets) to a 3D-type nanostructure (nanoribbons) leads to a significant enhancement of the N₂ fixation activity due to the formation of exposed Ti-OH sites. A linear relationship is observed between ammonia formation rate and amount of oxygen on the surface of Ti₃ C₂ MXene.

Needs and Gaps for Catalysis in Addressing Transitions in Chemistry and Energy from a Sustainability Perspective

Catalysis is undergoing a major transition resulting from significant changes in chemical and energy production. To honor the 50th anniversary of establishing the Jerzy Haber Institute of Catalysis and Surface Chemistry, this Essay discusses, from a forward-looking, personal and somewhat provocative perspective, the needs and gaps of catalysis to address the ongoing transition in chemistry and energy from a sustainability perspective. The focus is on a few selected aspects identified as crucial: i) The precise synthesis of catalytic materials, particularly focusing on mesoporous molecular sieves, metal-organic frameworks, and zeolites (particularly two-dimensional type); ii) advanced catalyst characterization methods; iii) new concepts and approaches needed in catalysis to meet the demands of a field of energy and chemistry in transition.

2D Oxide Nanomaterials to Address the Energy Transition and Catalysis

2D oxide nanomaterials constitute a broad range of materials, with a wide array of current and potential applications, particularly in the fields of energy storage and catalysis for sustainable energy production. Despite the many similarities in structure, composition, and synthetic methods and uses, the current literature on layered oxides is diverse and disconnected. A number of reviews can be found in the literature, but they are mostly focused on one of the particular subclasses of 2D oxides. This review attempts to bridge the knowledge gap between individual layered oxide types by summarizing recent developments in all important 2D oxide systems including supported ultrathin oxide films, layered clays and double hydroxides, layered perovskites, and novel 2D-zeolite-based materials. Particular attention is paid to the underlying similarities and differences between the various materials, and the subsequent challenges faced by each research community. The potential of layered oxides toward future applications is critically evaluated, especially in the areas of electrocatalysis and photocatalysis, biomass conversion, and fine chemical synthesis. Attention is also paid to corresponding novel 3D materials that can be obtained via sophisticated engineering of 2D oxides.

Filling of Irregular Channels with Round Cross-Section: Modeling Aspects to Study the Properties of Porous Materials

The filling of channels in porous media with particles of a material can be interpreted in a first approximation as a packing of spheres in cylindrical recipients. Numerous studies on micro- and nanoscopic scales show that they are, as a rule, not ideal cylinders. In this paper, the channels, which have an irregular shape and a circular cross-section, as well as the packing algorithms are investigated. Five patterns of channel shapes are detected to represent any irregular porous structures. A novel heuristic packing algorithm for monosized spheres and different irregularities is proposed. It begins with an initial configuration based on an fcc unit cell and the subsequent densification of the obtained structure by shaking and gravity procedures. A verification of the algorithm was carried out for nine sinusoidal axisymmetric channels with different D_min/D_max ratio by MATLAB^® simulations, reaching a packing fraction of at least 0.67 (for sphere diameters of 5%D_min or less), superior to a random close packing density. The maximum packing fraction was 73.01% for a channel with a ratio of D_min/D_max = 0.1 and a sphere size of 5%D_min. For sphere diameters of 50%D_min or larger, it was possible to increase the packing factor after applying shaking and gravity movements.

Influence of Shell Thickness on the Colloidal Stability of Magnetic Core-Shell Particle Suspensions

We present a Discrete Element study of the behavior of magnetic core-shell particles in which the properties of the core and the shell are explicitly defined. Particle cores were considered to be made of pure iron and thus possessed ferromagnetic properties, while particle shells were considered to be made of silica. Core sizes ranged between 0.5 and 4.0 μm with the actual particle size of the core-shell particles in the range between 0.6 and 21 μm. The magnetic cores were considered to have a magnetization of one tenth of the saturation magnetization of iron. This study aimed to understand how the thickness of the shell hinders the formation of particle chains. Chain formation was studied with different shell thicknesses and particle sizes in the presence and absence of an electrical double layer force in order to investigate the effect of surface charge density on the magnetic core-shell particle interactions. For core sizes of 0.5 and 4.0 μm the relative shell thicknesses needed to hinder the aggregation process were approximately 0.4 and 0.6 respectively, indicating that larger core sizes are detrimental to be used in applications in which no flocculation is needed. In addition, the presence of an electrical double layer, for values of surface charge density of less than 20 mC/m², could stop the contact between particles without hindering their vertical alignment. Only when the shell thickness was considerably larger, was the electrical double layer able to contribute to the full disruption of the magnetic flocculation process.

Chemistry Future: Priorities and Opportunities from the Sustainability Perspective

To celebrate the 10 year anniversary of ChemSusChem, we as the chairmen of the editorial board are writing this Essay to summarize important scientific contributions to our journal during the past decade in terms of sustainable science and technology. Bibliometric analysis of published papers show that biorefinery, solar energy conversion, energy-storage materials, and carbon dioxide utilizations attracted most attention in this area. According to our own knowledge and understanding and from the sustainability point of view, we are also pointing out those research directions that we believe can play key roles in the future chemistry to meet the grand challenges in energy and environment. Hopefully, these perspective aspects will provide the readers with new angles to look at the chemistry in the coming decades and inspire the development of new technologies to make our society sustainable.

Grand challenges for catalysis in the Science and Technology Roadmap on Catalysis for Europe: moving ahead for a sustainable future

This perspective discusses the general concepts that will guide future catalysis and related grand challenges based on the Science and Technology Roadmap on Catalysis for Europe prepared by the European Cluster on Catalysis.

Highly active Pd–Ni nanocatalysts supported on multicharged polymer matrix

In this article, we report the synthesis of mono- and bimetallic Pd–Ni nanocomposites supported on a multicharged polymeric matrix for catalytic applications.

Turning Perspective in Photoelectrocatalytic Cells for Solar Fuels

The development of new devices for the use and storage of solar energy is a key step to enable a new sustainable energy scenario. The route for direct solar-to-chemical energy transformation, especially to produce liquid fuels, represents a necessary element to realize transition from the actual energy infrastructure. Photoelectrocatalytic (PECa) devices for the production of solar fuels are a key element to enable this sustainable scenario. The development of PECa devices and related materials is of increasing scientific and applied interest. This concept paper introduces the need to turn the viewpoint of research in terms of PECa cell design and related materials with respect to mainstream activities in the field of artificial photosynthesis and leaves. As an example of a new possible direction, the concept of electrolyte-less cell design for PECa cells to produce solar fuels by reduction of CO2 is presented. The fundamental and applied development of new materials and electrodes for these cells should proceed fully integrated with PECa cell design and systematic analysis. A new possible approach to develop semiconductors with improved performances by using visible light is also shortly presented.

Nanostructured platinum in ordered mesoporous silica as novel efficient catalyst for propane total oxidation

Nanostructured platinum in ordered mesoporous silica SBA-15 and KIT-6 were synthesized. Pt particles with lower oxidation state were more homogeneously dispersed within the pores of KIT-6, making it an efficient catalyst for propane total oxidation.

Theoretical study of xenon adsorption in UO2 nanoporous matrices

We present a theoretical study of xenon incorporation in UO2 nanocavities, by means of Grand Canonical Monte Carlo calculations based on semi-empirical potentials. We first characterize the reconstruction of the matrix around an empty cavity which leads to a stoechiometry change from UO2 to UO in this region. Then, we determine xenon adsorption isotherms which exhibit an abrupt transition from a dilute phase to a dense one and an increase in the density of the latter phase as a function of temperature. This last result is attributed to a vibrational entropy effect by means of a mean field analysis. Finally, the pressure calculation inside the bubble proves the limitations of the usual mesoscopic models based on gas state behaviour.

Heterogeneous catalytic activity of platinum nanoparticles hosted in mesoporous silica thin films modified with polyelectrolyte brushes

Platinum nanoparticles of 3 nm diameter were included in mesoporous silica thin films by controlling the mesopore surface charge with a short polymer brush. This metal-polymer-mesopore nanocomposite presents high catalytic activity toward ammonia oxidation at low temperatures with 4.5% weight platinum loading. An anomalous partial selectivity toward nitrous oxide is observed for the first time, which can be traced back to the synergy of the particles and modified surface. This effect opens a path toward the design of nanocomposite catalysts with highly controlled environments, in which the size- and function-controlled cavities can be tuned in order to lower the reaction barriers.

Tuning the redox activity of encapsulated metal clusters via the metallic and semiconducting character of carbon nanotubes

We demonstrate that reactions confined within single-walled carbon nanotube (SWCNT) channels are modulated by the metallic and semiconducting character of the hosts. In situ Raman and X-ray absorption near-edge structure spectroscopies provide complementary information about the electronic state of carbon nanotubes and the encapsulated rhenium species, which reveal electronic interactions between encapsulated species and nanotubes. More electrons are transferred from metallic tubes (m-SWCNTs) to oxidic rhenium clusters, leading to a lower valence state rhenium oxide than that in semiconducting tubes (s-SWCNTs). Reduction in 3.5% (vol/vol) H2/Ar leads to weakened host-guest electronic interaction. The high valence state Re within s-SWCNTs is more readily reduced when raising the temperature, whereas only a sluggish change is observed for Re within m-SWCNTs. Only at 400 °C does Re reach a similar electronic state (mixture of Re(0) and Re(4+)) in both types of tubes. Subsequent oxidation in 1% O2/Ar does not show changes for Re in s-SWCNTs up to 200 °C. In comparison, m-SWCNTs facilitate the oxidation of reduced rhenium (160 °C). This can be exploited for rational design of active catalysts with stable species as a desired valence state can be obtained by selecting specific-type SWCNTs and a controlled thermal treatment. These results also provide a chemical approach to modulate reversibly the electronic structure of SWCNTs without damaging the sidewalls of SWCNTs.

Superior performance of metal-organic frameworks over zeolites as solid acid catalysts in the Prins reaction: green synthesis of nopol

The catalytic performance of a set of metal-organic frameworks [CuBTC, FeBTC, MIL-100(Fe), MIL-100(Cr), ZIF-8, MIL-53(Al)] was investigated in the Prins condensation of β-pinene with formaldehyde and compared with the catalytic behavior of conventional aluminosilicate zeolites BEA and FAU and titanosilicate zeolite MFI (TS-1). The activity of the investigated metal-organic frameworks (MOFs) increased with the increasing concentration of accessible Lewis acid sites in the order ZIF-8<MIL-53(Al)<FeBTC<MIL-100(Cr)<MIL-100(Fe). Unwanted β-pinene-like isomerization takes place on the strong Brønsted acid sites of zeolites BEA and FAU, which showed significantly lower selectivity to the target nopol than the MOFs. Its high activity, the preservation of its structure and active sites, and the possibility to use it in at least three catalytic cycles without loss of activity make MIL-100 (Fe) the best performing catalyst of the series for the Prins condensation of β-pinene and paraformaldehyde. Our report exemplifies the advantages of MOFs over zeolites as solid catalysts in liquid-phase reactions for the production of fine chemicals.

Local surface structure effect on reactivity of molecules confined between metallic surfaces

Interactions between metallic surfaces separated by nanometer distances create an unusual reactivity environment. Here we evaluate the effect of the geometry given by differences in the structures of the interacting surfaces and by the presence of steps. Adsorption of an oxygen molecule and its dissociation is examined in gaps defined by interacting platinum surfaces that have separations between 5.36 and 4.70 Å, and by comparing the effect of the different gap geometries on the adsorption strength and barriers for dissociation. It is found that specific surface-surface configurations influence the electronic structure of the surface where the molecule is adsorbed, modifying the width of its d-orbital and therefore the adsorption strength due to changes in the overlap of the adsorbate molecular orbitals with the metal d-band. In addition, the degree of the molecule-metal interaction with the other surface may restrict the adsorbate mobility and its dissociation. The presence of defects may decrease the adsorbate-surface interaction strength, but the net result depends on the specific reaction and nature of the intermediates since in some cases weaker adsorptions may result in lower dissociation barriers.