Metal–organic frameworks as media for the catalytic degradation of chemical warfare agents

Understanding the Decomposition of Dimethyl Methyl Phosphonate on Metal-Modified TiO2(110) Surfaces Using Ensembles of Product Configurations

The decomposition of dimethyl methyl phosphonate (DMMP), a simulant for the nerve agent sarin, was investigated on Cu4/TiO2(110) and K/Cu4/TiO2(110) surfaces using a combination of near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory calculations (DFT). Mass-selected Cu4 clusters and potassium (K) atoms were deposited onto TiO2(110) as a metal catalyst and alkali promoter to improve the reactivity and recyclability of the TiO2 surface after exposure to DMMP. Surface reaction products resulting from decomposition of DMMP were probed by NAP-XPS measurements of phosphorus (P) 2p and carbon 1s core-level spectra. The Cu4/TiO2(110) surface is found to be very active for DMMP decomposition with highly reduced P-species observed even at room temperature (RT). The codeposition of K atoms and Cu4 clusters further improves the reactivity with no intact DMMP detectable. Temperature-dependent measurements show that the presence of K atoms promotes the removal of residual P-species at temperatures > 600 K. Detailed DFT calculations were performed to determine the surface structures and energetically accessible pathways for DMMP decomposition on Cu4/TiO2(110) and K/Cu4/TiO2(110) surfaces. The calculations show that DMMP and P-containing reaction products preferentially bind to the TiO2 surface, while the molecular fragments, i.e., methoxy and methyl, bind to both the Cu4 clusters and TiO2. The Cu4 clusters make the P-O, O-C, and P-C bond cleavages of DMMP markedly more exothermic. The Cu4 clusters are highly fluxional with atomic structures that depend on the configuration of fragments bound to them. Finally, the manifold of P 2p chemical shifts calculated for a large number of energetically favorable configurations of decomposition products is in good agreement with the observed XPS spectra and provides an alternative way of interpreting incompletely resolved core-level spectra using an ensemble of observed structures.

Ultraviolet Light-Assisted Decontamination of Chemical Warfare Agent Simulant 2-Chloroethyl Phenyl Sulfide on Metal-Loaded TiO2 /Ti Surfaces

The application of ultraviolet (UV) light for the decontamination of chemical warfare agents (CWAs) has gained recognition as an effective method, especially for treating hard-to-reach areas where wet chemical methods are impractical. In this study, TiO2 /Ti was employed as a model catalyst, which was contaminated with 2-chloroethyl phenyl sulfide (CEPS), and subjected to photocatalytic decontamination using both UVB and UVC light. Additionally, photocatalytic decontamination efficiency by introducing Au, Pt, and Cu onto the TiO2 /Ti surface was explored. During the photodecomposition process under UVC light, at least eight distinct secondary byproducts were identified. It was observed that the introduction of overlayer metals did not significantly enhance the photodecomposition under UVC light instead overlaid Au exhibited substantially improved activity under UVB light. Whereas, photodecomposition process under UVB light, only five secondary products were detected, including novel compounds with sulfoxide and sulfone functional groups. This novel study offers valuable insights into the generation of secondary products and sheds light on the roles of overlayer metals and photon wavelength in the photodecontamination process of CWA.

High Capacity Adsorption and Degradation of a Nerve Agent Simulant and a Pesticide by a Nickel Pyrazolate Metal-Organic Framework

The development of materials that enable the efficient removal of toxic compounds is important for the improvement of current protective materials or decontamination technologies. Current materials rely either on agent removal by adsorption or by effecting (catalytic) degradation. Ideally, both of these mechanisms are combined in a single material in order to target a more broad spectrum of toxic agents and to improve the performance of the materials. Recent attempts to combine materials with either adsorptive or catalytic properties into a composite material are promising, although the overall performance often suffers from competition for the agent between the adsorptive and catalytic domains in the composites. In this work, we propose that metal-organic frameworks (MOFs) could feature both adsorptive properties as well as catalytic properties in a single structural domain, thereby avoiding a reduction in the overall performance originating from competitive agent interactions. We showcase this concept using the MOF Ni3(BTP)2, which exhibits strong affinity and high capacity for the storage of a nerve agent simulant and a pesticide. Moreover, it is demonstrated that the adsorbed agents are efficiently degraded and that the nontoxic degradation products are rapidly expelled from the MOF pores. Its ability to catalyze the hydrolytic degradation of both organophosphate and organophosphorothioate compounds highlights another unique feature of this material. The presented concept illustrates the feasibility for developing materials that target a broader spectrum of agents via adsorption, catalysis, or both and by their broader reactivity toward different types of agents.

Research progress of MOF-based membrane reactor coupled with AOP technology for organic wastewater treatment

MOF-based catalytic membrane reactor (MCMR), which can simultaneously achieve membrane separation and chemical catalytic degradation in an integrated system, is a cutting-edge technology for effective treatment of organic pollutants in water. The coupling of MCMR and advanced oxidation process (AOP) not only significantly improves the pollutant removal efficiency but also inhibits the membrane pollution through self-cleaning effect, thus improving the stability of MCMR. This paper reviews different MCMR systems combined with photocatalysis, Fenton oxidation, and persulfate activation, elucidates the reaction mechanism, discusses key issues to improve system effectiveness, and suggests future challenges and research directions.

Ultrafast Photocatalytic Detoxification of Mustard Gas Simulants by a Mesoporous Metal-Organic Framework with Dangling Porphyrin Molecules

Developing effective catalysts to degrade chemical warfare agents is of great significance. Herein, a mesoporous MIL-101(Cr) composite material dangled with porphyrin molecules (denote as TCPP@MIL-101(Cr), TCPP = tetra(4-carboxyphenyl)porphyrin) is reported, which can be used as a heterogeneous photocatalyst for detoxification of mustard gas simulants 2-chloroethyl ethyl sulfide (CEES) to 2-chloroethyl ethyl sulfoxide (CEESO) with a half-life of 1 min. The catalytic performance of TCPP@MIL-101(Cr) is comparable to that of homogeneous molecular porphyrin. Mechanistic studies reveal that both 1 O2 and O2 •- are efficiently generated and play vital roles in the oxidation reaction. Gold nanoparticles (AuNPs) are attached to the TCPP@MIL-101(Cr) to further enhance the catalytic activity with a benchmark half-life of 45 s, which is the fastest record so far. A medical mask loaded TCPP@MIL-101(Cr) is fabricated for practical applications, which can selectively photoxidize CEES to CEESO under sunlight and air atmosphere, exhibiting the best degradation performance among the reported fabric-like composite materials.

Advances in Metal-Organic Frameworks for the Removal of Chemical Warfare Agents: Insights into Hydrolysis and Oxidation Reaction Mechanisms

The destruction of chemical warfare agents (CWAs) is a crucial area of research due to the ongoing evolution of toxic chemicals. Metal-organic frameworks (MOFs), a class of porous crystalline solids, have emerged as promising materials for this purpose. Their remarkable porosity and large surface areas enable superior adsorption, reactivity, and catalytic abilities, making them ideal for capturing and decomposing target species. Moreover, the tunable networks of MOFs allow customization of their chemical functionalities, making them practicable in personal protective equipment and adjustable to dynamic environments. This review paper focuses on experimental and computational studies investigating the removal of CWAs by MOFs, specifically emphasizing the removal of nerve agents (GB, GD, and VX) via hydrolysis and sulfur mustard (HD) via selective photooxidation. Among the different MOFs, zirconium-based MOFs exhibit extraordinary structural stability and reusability, rendering them the most promising materials for the hydrolytic and photooxidative degradation of CWAs. Accordingly, this work primarily concentrates on exploring the intrinsic catalytic reaction mechanisms in Zr-MOFs through first-principles approximations, as well as the design of efficient degradation strategies in the aqueous and solid phases through the establishment of Zr-MOF structure-property relationships. Recent progress in the tuning and functionalization of MOFs is also examined, aiming to enhance practical CWA removal under realistic battlefield conditions. By providing a comprehensive overview of experimental findings and computational insights, this review paper contributes to the advancement of MOF-based strategies for the destruction of CWAs and highlights the potential of these materials to address the challenges associated with chemical warfare.

Water-Accelerated Transport: Vapor-Phase Nerve Agent Simulant Delivery within a Catalytic Zirconium Metal-Organic Framework as a Function of Relative Humidity

Zirconium-based metal-organic frameworks (MOFs) are candidate materials for effective nerve agent detoxification due to their thermo- and water stability as well as high density of catalytic Zr sites. However, as high-porosity materials, most of the active sites of Zr-MOFs can only be accessed by diffusion into the crystal interior. Therefore, the transport of nerve agents in nanopores is an important factor in the catalytic performance of Zr-MOFs. Here, we investigated the transport process and mechanism of a vapor-phase nerve agent simulant, dimethyl methyl phosphonate (DMMP), through a representative Zr-MOF, NU-1008, under practical conditions of varying humidity. Confocal Raman microscopy was used to monitor the transport of DMMP vapor through individual NU-1008 crystallites, where the relative humidity (RH) of the environment was tuned to understand the impact of water. Counterintuitively, water in the MOF channels, instead of blocking DMMP transport, assists DMMP diffusion; indeed, the transport diffusivity (D_t) of DMMP in NU-1008 is one order of magnitude higher at 70% than 0% RH. To understand the mechanism, magic angle spinning NMR and molecular dynamics simulations were performed and suggested that high water content in the channels prevents DMMP from hydrogen-bonding with the nodes, allowing for faster diffusion of DMMP in the channels. The simulated self-diffusivity (D_s) of DMMP is observed to be concentration-dependent. At low loading of DMMP, D_s is higher at 70% RH than 0% RH, while at high loadings the trend reverses due to the DMMP aggregation in water and the reduction of free volume in channels.

Self-Assembled MOF-on-MOF Nanofabrics for Synergistic Detoxification of Chemical Warfare Agent Simulants

The development of protective fabrics that are capable of capturing and detoxifying a wide range of lethal chemical warfare agents (CWAs) in an efficient way is of great importance for individual protection gears/clothing. In this work, unique metal-organic framework (MOF)-on-MOF nanofabrics were fabricated through facile self-assembly of UiO-66-NH₂ and MIL-101(Cr) crystals on electrospun polyacrylonitrile (PAN) nanofabrics and exhibited intriguing synergistic effects between the MOF composites on the detoxification of both nerve agent and blistering agent simulants. MIL-101(Cr), although not catalytic, facilitates the enrichment of CWA simulants from solution or air, thereby delivering a high concentration of reactants to catalytic UiO-66-NH₂ coated on its surface and providing an enlarged contact area for CWA simulants with the Zr₆ nodes and aminocarboxylate linkers compared to solid substrates. Consequently, the as-prepared MOF-on-MOF nanofabrics showed a fast hydrolysis rate (t_1/2 = 2.8 min) for dimethyl 4-nitrophenylphosphate (DMNP) in alkaline solutions and a high removal rate (90% within 4 h) of 2-(ethylthio)-chloroethane (CEES) under environmental conditions, considerably surpassing their single-MOF counterparts and the mixture of two MOF nanofabrics. This work demonstrates synergistic detoxification of CWA simulants using MOF-on-MOF composites for the first time and has the potential to be extended to other MOF/MOF pairs, which provides new ideas for the development of highly efficient toxic gas-protective materials.

Molecularly imprinted self-buffering double network hydrogel containing bi-amidoxime functional groups for the rapid hydrolysis of organophosphates

The development of high-performance catalyst materials with high catalytic activity for the hydrolysis of organophosphorus toxicants without additional pH buffer conditions has become an urgent need for practical application. Here, a multifunctional molecularly imprinted polymer double network hydrogel (MIP-DN) material has been prepared by integrating the first polymer network containing the functional group of bi-amidoxime as the catalytic active center and the cationic polymer polyethyleneimine (PEI) with pH buffer function as the main component of the second network. Advantageously, the resultant MIP-DN hydrogel showed excellent catalytic performance without additional pH buffer conditions, exhibiting a half-life of 25 min for the hydrolysis of paraoxon in pure water. Together with multi-functions of high catalytic activity, self-buffering function and excellent processability, the MIP-DN hydrogel prepared in this work provides a new strategy for the preparation of catalytic materials with practical application value toward toxic organophosphates.

Porphyrin-Moiety-Functionalized Metal-Organic Layers Exhibiting Catalytic Capabilities for Detoxifying Nerve Agent and Blister Agent Simulants

The development of very efficient bifunctional catalysts for the simultaneous detoxification of two kinds of the deadliest chemical warfare agents (CWAs), nerve agent and blister agent, is highly desirable. In this study, two porphyrin-based ligands [tetrakis(4-carboxyphenyl) porphyrin (TCPP) and protoporphyrin IX (PPIX)] are introduced into 2D Zr-1,3,5-tris(4-carboxyphenyl)benzene (BTB) metal-organic layers (MOLs), composed of six-connected Zr₆ nodes and the tritopic carboxylate ligand BTB, by a solvent-assisted ligand incorporation method. The loads of TCPP and PPIX are 6.4 and 10.9 wt %, respectively. The detoxification of simulants of the nerve agent and the blister agent was conducted to investigate the catalytic activity of porphyrin-moiety-functionalized MOLs. The reaction half-life of optimal TCPP-functionalized MOL catalyzing the hydrolysis of a nerve agent simulant is only 2.8 min, meanwhile, the half-life of the selective catalytic oxidation of a blister agent simulant is only 1.2 min under LED illumination. More importantly, such a degradation half-life is only about 4 min under natural sunlight (∼60 mW/cm²). To our knowledge, TCPP-functionalized MOL is by far the most efficient catalyst for blister agent simulant degradation under solar light. Therefore, 2D ultrathin MOLs on demand appear to be a promising and efficient material platform for the development of bifunctional catalysts for CWA protection.

Rational Design of a Zr-MOF@Curli-Polyelectrolyte Hybrid Membrane toward Efficient Chemical Protection, Moisture Permeation, and Catalytic Detoxification

Developing high-performance protective materials is important for soldiers and civilians who are exposed to the atmosphere of highly toxic chemical warfare agents (CWAs). Polyelectrolyte membranes are promising candidates with excellent chemical resistance and moisture permeability, but they cannot efficiently degrade CWAs. Here, we design and prepare a hybrid membrane through in situ growth of catalytically active zirconium-based metal-organic frameworks (Zr-MOFs) on a polyelectrolyte membrane mediated by biofilm-inspired curli nanofibers (CNFs). Superior to the bare polyelectrolyte membrane, the prepared MOF-808@CNF-PQ hybrid membrane exhibits improved rejection of the nerve agent simulant dimethyl methyl phosphonate (DMMP) vapor and permeation of the water vapor by 113 and 45%, respectively. The water/DMMP selectivity of the hybrid membrane reaches 498.6, approximately 13 times that of the commercial polyelectrolyte membrane Nafion 117. In addition, the hybrid membrane possesses appreciable catalytic activity for the hydrolysis of the nerve agent simulant dimethyl 4-nitrophenyl phosphate (DMNP) with a half-life of ∼38 min. Nanomechanical characterization results based on atomic force microscopy (AFM) techniques demonstrate the critical role of CNFs in mediating Zr-MOF nucleation and the dominant effect of electrostatic interactions on self-assembly of CNFs on polyelectrolyte base. It is also confirmed that the Zr-MOF toppings serve as the key components in physically adsorbing and chemically degrading the DMNP molecules through multiple strong intermolecular interactions. Our work offers a rational strategy to develop advanced membranes toward efficient chemical protection, moisture permeation, and catalytic detoxification against CWAs.

Large-Scale Synthesis of Iron Ore@Biomass Derived ESBC to Degrade Tetracycline Hydrochloride for Heterogeneous Persulfate Activation

Iron-based catalysts are widely used in water treatment and environmental remediation due to their abundant content in nature and their ability to activate persulfate at room temperature. Here, eggshell biochar-loaded natural iron slag (IO@ESBC) was successfully synthesized to remove tetracycline hydrochloride (TCH) by activated persulfate. The morphology, structure and chemical composition of IO@ESBC were systematically characterized. The IO@ESBC/PS process showed good performance for TCH removal. The decomposition rate constant (k) for IO@ESBC was 0.011 min−1 and the degradation rate was 3690 mmol/g/h in this system. With the increase of PS concentration and IO@ESBC content, the removal rate of TCH both increased. The IO@ESBC/PS process can effectively remove TCH at pH 3–9. There are different effects on TCH removal for the reason that the addition of water matrix species (humic acid, Cl−, HCO3−, NO3− and HPO42−). The IO@ESBC/PS system for degrading TCH was mainly controlled by both the free radical pathway (SO4•−, •OH and O2•−) and non-free radical pathway (1O2). The loading of ESBC slows down the agglomeration between iron particles, and more active sites are exposed. The removal rate of TCH was still above 75% after five cycles of IO@ESBC. This interesting investigation has provided a green route for synthesis of composite driving from waste resources, expanding its further application for environmental remediations.

The potential of a natural iron ore residue application in the efficient removal of tetracycline hydrochloride from an aqueous solution: insight into the degradation mechanism

In the existing research, most of the heterogeneous catalysts applied in the activation of persulfate to degrade organic pollutants were synthesized from chemical reagents in the laboratory. In this paper, we have obtained a spent iron ore (IO) residue directly collecting from the iron ore plants, and efficiently activating peroxydisulfate (PS) to produce reactive free radicals. The experimental results demonstrated that the IO could effectively activate PS to degrade tetracycline hydrochloride (TCH), with TCH removal rate reaching up to 85.6% within 2 h at room temperature. The TCH removal rate was increased with increasing iron ore dosage, while the more acidic pH condition would be favorable to TCH removal process. The material characterization results demonstrated that the dominant components of IO were Fe₃O₄ and FeOOH. The transformation from Fe(II) to Fe(III) at the surface IO was observed after TCH degradation. What's more, the quenching experiment and EPR detection results confirmed that the sulfate radical (SO₄^•-) and hydroxyl radicals (•OH) would be acting as the main free radicals for TCH degradation. This study could not only explore a novel way to recycle the discarded iron ore, but also further expand its application in an effective activation of PS in an aqueous solution.

Catalytic degradation of CWAs with MOF-808 and PCN-222: Toward practical application

Chemical warfare agents, such as nerve agents (GD and VX) and blister agents (HD), have strong toxicities to mankind. In recent years, zirconium-based metal-organic frameworks have been found to be attractive materials for chemical warfare agent degradation. Among them, metal-organic framework-808 (MOF-808) and porous coordination network-222 (PCN-222) were the best. However, few papers pay attention to their practical application. In this work, we prepared MOF-808 and PCN-222 using water phase and organic solvothermal methods, respectively. Their performance for the catalytic degradation of chemical warfare agents under practical decontamination conditions was studied. The results showed that MOF-808 displayed a high potency for catalytic hydrolysis of VX (10,000 mg L−1) in unbuffered solution. PCN-222 exhibited weaker reactivity with a half-life ( t1/2) of 28.8 min. Their different performances might stem from the different connectivity of the Zr6 nodes and framework structures. The results illustrated that the hydrolysis of high-concentration GD required a strong alkaline buffer to neutralize the hydrolysis product of hydrofluoric acid (HF) to avoid catalyst poisoning. When H2O2 was used as the oxidant instead of O2, both zirconium-based metal-organic frameworks performed with effective catalytic potency for HD degradation without any special lighting and so was suitable for practical application, whereas the products obtained from HD, such as HDO2 and V-HDO2, still possessed vesicant toxicity. Overall, MOF-808 prepared via a water-phase synthesis performed with effective catalysis for the degradation of high-concentration VX, GD, and HD with t1/2 of < 0.5, 3.1 and 2.2 min, respectively, exhibiting its potential for practical applications.

Soft detoxification of chemical warfare agent simulants and pesticides under pressure

The neutralisation of structurally varied chemical warfare agent simulants (blister and nerve agents) and pesticides (Paraoxon) with the assistance of high pressure is reported. Chloroethyl amines and sulfides (nitrogen and sulfur mustards), phosphonothioates (V-series nerve agents) and phosphates (pesticide) readily react with simple nucleophilic scavengers (alcohols, amines) at P > 14 000 bar.

Efficient Decontamination of HD by an Electrophilic Iodine/Carboxylate Composite as an Active Sorbent

The development of new and efficient decontamination methods has become more relevant in recent years, especially with regard to solid-based decontamination and detoxification systems. The majority of powders used today are dealing with the physical adsorption of chemical warfare agents (CWAs) and their removal from sites without actively destroying them. In this work, we have designed and developed an active solid composite matrix combining organic carboxylate salts and N-iodosuccinimide (NIS) for HD decontamination via oxidation. All the reactions and mechanistic studies for the sorption and degradation of CWAs were conducted using direct polarization and cross polarization solid-state magic-angle spinning nuclear magnetic resonance techniques. Performance toward the sorption and detoxification of HD was tested, exhibiting oxidation within minutes in a mild and selective manner to the nontoxic sulfoxide derivative followed by visible formation of iodine. The results indicate that carboxylate moieties in the matrix are important for stabilizing the positively charged sulfonium ion intermediate and for supplying oxygen for hydrolysis in a water-deficient environment. The NaOBz/NIS composite was shown to be the most efficient in sorbing and converting the water-insoluble agent HD to its nontoxic, water-soluble sulfoxide, which could then be removed from the site with mere water, resulting in less environmental damage and quick remediation.

A figure of merits-based performance comparison of various advanced functional nanomaterials for adsorptive removal of gaseous ammonia

The implementation of sustainable industrial development based on energy/cost-effective techniques with zero/low rate of pollutant emission is an ideal strategy for the proper management of a natural environment. Gaseous ammonia released from a variety of anthropogenic sources (e.g., agriculture, pharmaceuticals, commercial cleaning products, and refrigerant) is estimated to be as high as 150 million tons∙year^-1. To reduce the negative effects of atmospheric ammonia, the great utility of advanced functional nanomaterials (e.g., metal organic frameworks, covalent organic polymers, metal/metal oxide nanoparticles, and carbon nanostructures) has been recognized. To gain a better understanding of the sorptive removal potential of diverse materials, their performance has been evaluated based on the key performance merits (e.g., initial concentration, sorption capacity, and partition coefficient). Generally, the PC values can be applied to significantly estimate the contaminant adsorption potential of NMs via balancing the biased influences of operating parameters (e.g., initial concentration of pollutants) as perceived for the partitioning of compounds between aqueous phases at equilibrium (e.g., Henry's Law). Therefore, in this work, we have proposed the PC as a prosperous performance merit (in terms of heterogeneity of surface and strength of adsorption process) for the selection of high performance nano-adsorbents for gaseous ammonia. Moreover, the water stability, recyclability, economic aspects, and future perspectives have also been discussed for real-world applications of advanced nanomaterial against gaseous ammonia adsorption. The outcome of this evaluation will be expedient for the classification/selection of the most effectual and cost-effective options for mitigation of environmental pollutants like gaseous ammonia.

Degradation of G-Type Nerve Agent Simulant with Phase-Inverted Spherical Polymeric-MOF Catalysts

For the neutralization of chemical warfare agents (CWAs), the generation of an effective catalyst that can be handled safely and applied in personal protective equipment is required. Recently, zirconium-based metal-organic frameworks (Zr-MOFs: UiO-66 and UiO-67) have shown great promise in the degradation of CWAs, including nerve agents. Their catalytic activity is owed to the interplay of both Zr(IV) Lewis acids and Lewis basic groups in the MOF structure. The latter act as proximal bases that can interact with CWAs and improve the catalytic activity of Zr-MOFs. The powder form of MOFs, though, makes them impractical catalysts, as it is challenging to handle, regenerate, and reuse them. To address this challenge, we have synthesized three Zr-MOFs with Lewis basic amino and pyridine functionalities and shaped them in spherical polymeric beads using the phase inversion method. Using this method, we can generate beads with many polymer and MOF combinations (MOF@polymer). We controlled the MOF loading in these beads, and scanning electron microscopy images revealed that the MOF crystals are evenly distributed in the polymeric matrix, ensuring effective catalytic activity. We used these beads to degrade dimethyl p-nitrophenyl phosphate (DMNP), a simulant for the G-type nerve agent. Using ³¹P NMR, we showed that UiO-66-NH₂@PES and UiO-67-(NH₂)₂@PES PES: poly(ether sulfone) beads destruct DMNP to dimethyl phosphate (DMP) with a half-life (t_1/2) of 5.09 and 4.34 min, respectively. Beads made of hydrophobic polymers such as poly(vinylidene fluoride) (PVDF), polystyrene (PS), and Zr-MOFs with pyridine functionalities show that the quantitative hydrolysis of DMNP requires more time compared to that seen with the UiO-66-NH₂@PES beads. Our work highlights the facile shaping of MOF powders into beads that can be easily regenerated with their catalytic activity to be maintained for at least three cycles of use.

Vibrational spectroscopy investigation of defects in Zr- and Hf-UiO-66

Missing cluster defects in Hf-UiO-66 cause a redshift of a distinct peak in the Raman spectrum.

Detoxification of the Toxic Sulfur Mustard Simulant by a Supramolecular Antidote in Vitro and in Vivo

Although great potential hazards and threats still occur from sulfur mustard, there are no specific medicine or therapy for the intoxication of sulfur mustard. Herein, we have demonstrated a supramolecular approach for the detoxification of the sulfur mustard simulant CEES (4) in vitro and in vivo by carboxylatopillar[5]arene potassium salts (CP[5]AK 1) efficiently based on host-guest interactions. The encapsulation of CEES (4) by the cavity of the pillar[5]arene 2 is driven by C-H···π interactions between CEES (4) and the electron-rich cavity of pillar[5]arene 2, which was investigated by 1H NMR titration, density functional theory studies, and the independent gradient model studies. CEES (4) is degradated to the reactive sulfonium salts quickly in aqueous media, resulting in the alkylation of DNA and proteins. The sulfonium salts can be encapsulated by CP[5]AK 1 efficiently, which accelerates the degradation of the sulfonium salts about 14 times. The cell and animal experiments indicated that the bioactivities of the sulfonium salts are inhibited with the formation of stable host-guest complexes, and CP[5]AK 1 has a good therapeutic effect on the damages caused by CEES (4) at either pre- or post-treatments. Due to the low cytotoxicity and good therapeutic effect, the anionic pillar[5]arenes are expected to be developed as specific antidotes against sulfur mustard (HD).

Facile Synthesis of Metal-Organic Layers with High Catalytic Performance toward Detoxification of a Chemical Warfare Agent Simulant

Two-dimensional (2D) metal-organic layer (MOL) materials are highly desired against chemical warfare agents (CWAs). However, the rapid synthesis of 2DMOLs with open metal sites in a single step is very challenging. Herein, a facile bottom-up method for synthesizing MOLs with microwave assistance is applied to produce Zr/Hf-BTB MOLs, composed of six-connected M₆O₄(OH)₄¹²⁺ and the tritopic carboxylate ligand 1,3,5-tris(4-carboxyphenyl)benzene (BTB). The synthesis and ligand exchange steps can be combined into a single step to yield MOLs with active open sites directly. The as-synthesized MOLs demonstrate excellent catalytic performance toward the degradation of a CWA simulant. The theoretical calculations confirm that the high catalytic activity is due to the formate groups coordinated to the metal nodes being replaced by hydroxyl groups. The present work not only develops a method for the fast synthesis of 2D MOLs with active open metal sites in a single step but also provides a first demonstration for the application of 2D metal coordination materials in CWA protection.

Reduced polyoxomolybdate immobilized on reduced graphene oxide for rapid catalytic decontamination of a sulfur mustard simulant

Keggin-type polyoxometalates (POMs) were immobilized on poly(diallyldimethylammonium chloride) (PDDA) functionalized reduced graphene oxide (rGO) by a facile and broad-spectrum hydrothermal method. The prepared POMs@PDDA-rGO composites (POM = H3PMo12O40, H3PW12O40, H5PMo10V2O40) have been thoroughly characterized using a series of techniques. The three composites can catalyze the oxidative decontamination of a sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES) in the order of PMo12@PDDA-rGO > PMo10V2@PDDA-rGO > PW12@PDDA-rGO. Notably, under ambient conditions PMo12@PDDA-rGO can convert 99% of CEES within 30 min in the presence of nearly stoichiometric aqueous H2O2 (3 wt%) and its catalytic activity is significantly higher than that of homogeneous H3PMo12O40. XPS spectral analysis and control experiments indicate that the Mo center of POM is reduced from +6 to +5 during the hydrothermal process, and the excellent catalytic performance is related to the reduction of Mo. Moreover, the PMo12@PDDA-rGO composite is stable during the decontamination process and it can be used for at least five cycles without loss of activity.

UiO-66-NH2 and Zeolite-Templated Carbon Composites for the Degradation and Adsorption of Nerve Agents

Composites of metal-organic frameworks and carbon materials have been suggested to be effective materials for the decomposition of chemical warfare agents. In this study, we synthesized UiO-66-NH2/zeolite-templated carbon (ZTC) composites for the adsorption and decomposition of the nerve agents sarin and soman. UiO-66-NH2/ZTC composites with good dispersion were prepared via a solvothermal method. Characterization studies showed that the composites had higher specific surface areas than pristine UiO-66-NH2, with broad pore size distributions centered at 1-2 nm. Owing to their porous nature, the UiO-66-NH2/ZTC composites could adsorb more water at 80% relative humidity. Among the UiO-66-NH2/ZTC composites, U0.8Z0.2 showed the best degradation performance. Characterization and gas adsorption studies revealed that beta-ZTC in U0.8Z0.2 provided additional adsorption and degradation sites for nerve agents. Among the investigated materials, including the pristine materials, U0.8Z0.2 also exhibited the best protection performance against the nerve agents. These results demonstrate that U0.8Z0.2 has the optimal composition for exploiting the degradation performance of pristine UiO-66-NH2 and the adsorption performance of pristine beta-ZTC.

Colloidal stability of phytosynthesised gold nanoparticles and their catalytic effects for nerve agent degradation

Herein, Tilia sp. bract leachate was used as the reducing agent for Au nanoparticles (Au NPs) phytosynthesis. The colloidal properties of the prepared Au NPs were determined to confirm their stability over time, and the NPs were then used as active catalysts in soman nerve agent degradation. The Au NPs characterisation, reproducibility and stability studies were performed under transmission electron microscopy, ultraviolet visible spectroscopy and with ζ-potential measurements. The reaction kinetics was detected by gas chromatography coupled with mass spectrometry detector and solid-phase micro-extraction to confirm the Au NPs applicability in soman hydrolysis. The 'green' phytosynthetic formation of colloidal crystalline Au NPs with dominant quasi-spherical shape and 55 ± 10 nm diameter was successfully achieved, and there were no significant differences in morphology, ζ-potential or absorbance values observed during the 5-week period. This verified the prepared colloids' long-term stability. The soman nerve agent was degraded to non-toxic substances within 24 h, with 0.2156 h^-1 reaction rate constant. These results confirmed bio-nanotechnology's great potential in preparation of stable and functional nanocatalysts for degradation of hazardous substances, including chemical warfare agents.

MIL-101(Cr) with incorporated polypyridine zinc complexes for efficient degradation of a nerve agent simulant: spatial isolation of active sites promoting catalysis

Development of an efficient catalyst for degradation of organophosphorus toxicants is highly desirable. Herein, an MIL-101(Cr)LZn catalyst was fabricated by incorporating polypyridine zinc complexes into a MOF to achieve the spatial isolation of active sites. Compared with a terpyridine zinc complex without an MIL-101 support, this catalyst was highly active for detoxification of diethyl-4-nitrophenylphosphate.

Progress and challenges of metal-organic frameworks-based materials for SR-AOPs applications in water treatment

As environmental problems become more and more severe, sulfate radical (SO₄^-) based advanced oxidation processes (SR-AOPs) are widely recognized for their high removal efficiency of recalcitrant organic pollutants in water. Metal-organic frameworks (MOFs) have attracted wide attention in SR-AOPs due to their outstanding properties (e.g. large surface area, ultra-high porosity, and diversity of material design, etc). Herein, we present an overview of the development and challenges in the synthesis of different types of MOFs, combination of MOFs with other materials (metal centers, conductors, cellulose, etc.) and the construction of catalysts with special structures (core-shell structures and hollow structures) as well as their applications in SR-AOPs for the degradation of organic pollutants. Several review papers have already mentioned the application of a branch of MOFs or simple composites of MOFs in SR-AOP, whereas the latest progresses on the application of MOFs-based materials to SR-AOPs was described rarely. Besides, the degradation mechanism of MOFs as catalysts has not been systematically discussed. To this end, the mechanisms of MOFs and MOF-based materials as catalysts to activate PMS/PS in different systems are analyzed, including radicals and non-radicals pathways. Meanwhile, considering that the research in this field is still in its infancy, a lot of improvements are still needed to effectively promote and implement this technology.

Assembly of two novel coordination polymers by selecting ditopic or chelating auxiliary ligands with naphthalene-2,6-dicarboxylic acid: synthesis, structure and luminescence sensing

The Fe^III ion as a ubiquitous metal plays a key role in biochemical processes. Iron deficiency or excess in the human body can induce various diseases. Thus, effective detection of the Fe^III ion has been deemed an issue of focus. To develop more crystalline chemical sensors for the selective detection of Fe³⁺, two novel two-dimensional (2D) coordination polymers, namely, poly[[[μ-bis(pyridin-4-yl)amine-κ²N:N'](μ-naphthalene-2,6-dicarboxylato-κ²O²:O⁶)zinc(II)] 0.5-hydrate], {[Zn(C₁₂H₆O₄)(C₁₀H₉N₃)]·0.5H₂O}_n, 1, and poly[(4,4'-dimethyl-2,2'-bipyridine-κ²N,N')(μ-naphthalene-2,6-dicarboxylato-κ²O²:O⁶)hemi(μ-naphthalene-2,6-dicarboxylic acid-κ²O²:O⁶)copper(II)] [Cu(C₁₂H₆O₄)(C₁₂H₁₂N₂)(C₁₂H₈O₄)_0.5]_n, 2, have been prepared using solvothermal methods. Single-crystal X-ray diffraction analysis shows that compound 1 is an undulating twofold interpenetrated 2D (4,4)-sql network and compound 2 is a twofold interpenetrated 2D honeycomb-type network with a (6,3)-hcb topology. In addition, 1 exhibits highly selective sensing for the Fe³⁺ ion.

Microwave-Assisted Solvothermal Synthesis of UiO-66-NH2 and Its Catalytic Performance toward the Hydrolysis of a Nerve Agent Simulant

Zr-containing metal-organic frameworks (MOFs) exhibit a good performance of catalyzing the hydrolysis of chemical warfare agents, which is closely related to the size of MOF particles and its defects, but these two factors are often intertwined. In this article, we synthesized UiO-66-NH2 nanoparticles using a microwave-assisted hydrothermal method. By using a new modulator 4-Fluoro-3-Formyl-Benzoic Acid (FFBA) in different proportions, MOF particles with the same defect degree but different scales and those with similar sizes but different defect degrees can be obtained. The performance of the obtained MOF particles to catalyze the hydrolysis of the nerve agent simulant, dimethyl 4-nitrophenyl phosphate (DMNP), was investigated, and the effects of single factors of size or defect were compared for the first time. As the size of the obtained MOF particles increased from 81 nm to 159 nm, the catalytic degradation efficiency toward DMNP gradually decreased, and the half-life increased from 3.9 min to 11.1 min. For MOFs that have similar crystal sizes, the catalytic degradation half-life of MOF3 is only 5 min, which is much smaller than that of MOF5 due to the defects increase from 1.2 to 1.8 per Zr6 cluster.

Catalytic Degradation of Nerve Agents

Nerve agents (NAs) are a group of highly toxic organophosphorus compounds developed before World War II. They are related to organophosphorus pesticides, although they have much higher human acute toxicity than commonly used pesticides. After the detection of the presence of NAs, the critical step is the fast decontamination of the environment in order to avoid the lethal effect of these organophosphorus compounds on exposed humans. This review collects the catalytic degradation reactions of NAs, in particular focusing our attention on chemical hydrolysis. These reactions are catalyzed by different catalyst categories (metal-based, polymeric, heterogeneous, enzymatic and MOFs), all of them described in this review.

Zr(OH)4/GO Nanocomposite for the Degradation of Nerve Agent Soman (GD) in High-Humidity Environments

Zirconium hydroxide, Zr(OH)₄ is known to be highly effective for the degradation of chemical nerve agents. Due to the strong interaction force between Zr(OH)₄ and the adsorbed water, however, Zr(OH)₄ rapidly loses its activity for nerve agents under high-humidity environments, limiting real-world applications. Here, we report a nanocomposite material of Zr(OH)₄ and graphene oxide (GO) which showed enhanced stability in humid environments. Zr(OH)₄/GO nanocomposite was prepared via a dropwise method, resulting in a well-dispersed and embedded GO in Zr(OH)₄ nanocomposite. The nitrogen (N₂) isotherm analysis showed that the pore structure of Zr(OH)₄/GO nanocomposite is heterogeneous, and its meso-porosity increased from 0.050 to 0.251 cm³/g, compared with pristine Zr(OH)₄ prepared. Notably, the composite material showed a better performance for nerve agent soman (GD) degradation hydrolysis under high-humidity air conditions (80% relative humidity) and even in aqueous solution. The soman (GD) degradation by the nanocomposite follows the catalytic reaction with a first-order half-life of 60 min. Water adsorption isotherm analysis and diffuse reflectance infrared Fourier transform (DRIFT) spectra provide direct evidence that the interaction between Zr(OH)₄ and the adsorbed water is reduced in Zr(OH)₄/GO nanocomposite, indicating that the active sites of Zr(OH)₄ for the soman (GD) degradation, such as surface hydroxyl groups are almost available even in high-humidity environments.

Defectous UiO-66 MOF Nanocomposites as Reactive Media of Superior Protection against Toxic Vapors

The composites of UiO-66 with nanographite or oxidized graphitic carbon nitride nanospheres (∼10 wt %) were synthesized and used as CEES decontamination media from a vapor phase. The materials were characterized using XRD, nitrogen adsorption, SEM, potentiometric titration, FTIR, and thermal analysis. The results showed a marked improvement of the detoxification capability against the vapors of CEES compared to those of pristine UiO-66, either in terms of the amount adsorbed or surface reactivity. The maximum weight uptake for the composites reached 632 mg g^-1, which was higher than that on UiO-66. The improved adsorption and catalytic activity were linked to the new interface between the modifiers and MOF units/defects, which provided additional active sites formed as a result of modifiers' surface groups acting as MOF linkers. The morphology and porosity were also altered, positively affecting the sites' accessibility and their dispersion in the MOF particles. Dehydrohalogenation and oxidation were the predominant pathways of the composites' surface reactivity. The detoxification mechanisms involving CEES vapor-UiO-66 surface interactions differ from those reported for CEES liquid/dissolved liquid-UiO-66 interactions, and dehydrohalogenation, fragmentation, and oxidation predominate.

Insights into Catalytic Gas-Phase Hydrolysis of Organophosphate Chemical Warfare Agents by MOF-Supported Bimetallic Metal-Oxo Clusters

Zirconium-based metal-organic frameworks (Zr-MOFs) have been reported to be efficient catalysts for the hydrolysis of organophosphate chemical warfare agents (CWAs) in buffered solutions. However, for the gas-phase reaction, which is more relevant to the situation in a battlefield gas mask application, the kinetics of Zr-MOF catalysts may be severely hindered by strong product inhibition. To improve the catalytic performance, we computationally screened a series of synthetically accessible Zr-MOF-supported bimetallic metal-oxo clusters in which the metal-oxygen-metal active motif is preserved, aiming to find catalysts that have lower binding affinities to the hydrolysis product. For the promising catalyst Al₂O₂(OH)₂@NU-1000 identified from the screening using density functional theory, we mapped out the full reaction pathway of gas-phase dimethyl p-nitrophenolphosphate (DMNP) hydrolysis and analyzed the free energy profile as well as the turnover frequency (TOF). We found that the catalytic mechanism on the new catalyst is slightly different from the one on NU-1000, which also led to a different TOF-limiting step. Additional factors that can affect the overall catalytic performance in practical application, such as the amount of ambient moisture and the existence of acid gases that may poison the catalyst, have also been evaluated.

Zirconium-Based Metal-Organic Frameworks for the Catalytic Hydrolysis of Organophosphorus Nerve Agents

Organophoshorus nerve agents are among the most toxic chemicals known to humans, and because of their unfortunate recent use despite international bans, there is an urgent need to develop materials that can effectively degrade these nerve agents. Within the past decade, zirconium-based metal-organic frameworks (Zr-MOFs) have emerged as a bioinspired class of materials capable of rapidly hydrolyzing these compounds and significantly diminishing their toxicity. Both experimental and computational insights have guided the design of Zr-MOFs, leading to the development of catalysts capable of detoxifying nerve agents and simulants, chemicals with similar functionality but lower toxicity, via hydrolysis within seconds in basic aqueous solutions. While these systems are acceptable for the elimination of stockpile weapons, translating this catalytic performance to filters incorporating Zr-MOFs that can be used in masks or protective clothing is not trivial. As such, a large area of focus recently has been targeted toward integrating these hydrolysis catalysts into protective clothing and gear while retaining the performance from solution-based catalytic systems. This Forum Article provides an overview of the development of Zr-MOFs for the catalytic hydrolysis of organophosphorus substrates, including design principles and mechanistic insights for both solution-based and textile-coated systems. Finally, we highlight the remaining challenges yet to be addressed and offer perspectives on the future directions for this field.

Impact of intrinsic framework flexibility for selective adsorption of sarin in non-aqueous solvents using metal–organic frameworks

We assess the nontrivial deviation in predicting the adsorption selectivity from bulk mixtures of complex molecules using nanoporous adsorbents approximated as rigid and intrinsically flexible.

The chemistry of Ce-based metal-organic frameworks

Metal-organic frameworks (MOFs) have gained widespread attention due to their modular construction that allows the tuning of their properties. Within this vast class of compounds, metal carboxylates containing tri- and tetravalent metal ions have been in the focus of many studies due to their often high thermal and chemical stabilities. Cerium has a rich chemistry, which depends strongly on its oxidation state. Ce(iii) exhibits properties typically observed for rare earth elements, while Ce(iv) is mostly known for its oxidation behaviour. In MOF chemistry this is reflected in their unique optical and catalytic properties. The synthetic parameters for Ce(iii)- and Ce(iv)-MOFs also differ substantially and conditions must be chosen to prevent reduction of Ce(iv) for the formation of the latter. Ce(iii)-MOFs are usually reported in comprehensive studies together with those constructed with other RE elements and normally they are isostructural. They exhibit a greater structural diversity, which is reflected in the larger variety of inorganic building units. In contrast, the synthesis conditions of Ce(iv)-MOFs were only recently (2015) established. These lead selectively to hexanuclear Ce-O clusters that are well-known for Zr-MOFs and therefore very similar structural and isoreticluar chemistry is found. Hence Ce(iv)-MOFs exhibit often high porosity, while only a few porous Ce(iii)-MOFs have been described. Some of these show structural flexibility which makes them interesting for separation processes. For Ce(iv)-MOFs the redox properties are most relevant. Thus, they are intensively discussed for catalytic, photocatalytic and sensing applications. In this perspective, the synthesis, structural chemistry and properties of Ce-MOFs are summarized.

Layer-by-Layer Fabrication of Core-Shell Fe3O4@UiO-66-NH2 with High Catalytic Reactivity toward the Hydrolysis of Chemical Warfare Agent Simulants

Detoxifying materials against chemical warfare agents (CWAs) and their simulants are highly desired for proper handling of contamination by and destruction of CWAs. Herein, we report a facile layer-by-layer fabrication of core-shell Fe₃O₄@UiO-66-NH₂ and its application in fast degradation of CWA simulants. The Fe₃O₄@UiO-66-NH₂ composite was prepared through a layer-by-layer epitaxial growth strategy, by alternately immersing Fe₃O₄ nanoparticles in ethanol solutions of a metal node [Zr₆O₄(OH)₄]¹²⁺ precursor and organic linkers [NH₂-BDC, 2-aminoterephthalic acid], respectively, and separating using a magnet. As confirmed by characterization results, the Fe₃O₄@UiO-66-NH₂ composites with 24.4 μmol/g Zr₆ node content showed a well-defined core-shell structure as well as good thermal and chemical stability. These core-shell magnetic metal-organic frameworks (MOFs) were further tested in the catalytic hydrolysis of dimethyl-4-nitrophenyl phosphate (a nerve agent simulant) and demonstrated 36 times higher catalytic activity than the UiO-66-NH₂ powder due to their highly defective surface, high percentage of MOFs on the surface, and their rich mesoporous structure. Since magnetism was retained after the coating of MOFs, Fe₃O₄@UiO-66-NH₂ could be easily recovered and reused after catalysis.

Nanomaterials-based treatment options for chromium in aqueous environments

Sustainable development and the restoration of ecosystems are the important goals for civilization. Currently, heavy metal contamination of aquatic environments has become a serious issue. Chromium (Cr) is simultaneously an essential metallic element and one of 20 chemicals posing a maximum threat to living beings. To mitigate that threat, various treatment methods have been developed, including adsorption, electrocoagulation, photoelectrocatalysis, fuel cells, bioremediation, chemical precipitation, ultrafiltration, ion exchange, and co-precipitation. However, selection of the most energy- and cost-efficient wastewater treatment option has proven challenging, as each approach is subject to shortcomings involving energy consumption, treatment capacity, and efficiency. This review describes the potential role of diverse functional nanomaterials (e.g., iron/iron oxide nanoparticles, carbon nanostructures, metal organic frameworks, and their commercial counterparts) in treatment of Cr in aqueous environments with respect to key figure of merits, such as, adsorption capacity, removal efficiency, and partition coefficient. In addition, their performance was compared with the most common treatment options. The results of this study will help determine the most effective and economical options for control of Cr in aquatic environments.

Metal Hydroxide/Polymer Textiles for Decontamination of Toxic Organophosphates: An Extensive Study of Wettability, Catalytic Activity, and the Effects of Aggregation

Electrospun nanofibers (NFs) incorporated with catalytically active components have gained significant interest in chemical protective clothing. This is because of the desirable properties of the NFs combined with decontamination capability of the active component. Here, a series of metal hydroxide catalysts Ti(OH)_x, Zr(OH)₄, and Ce(OH)₄ were incorporated into three different polymer NF systems. These new polymer/metal hydroxide composite NFs were then evaluated for their catalytic activity against a nerve agent simulant. Two methods were utilized to incorporate the metal hydroxides into the NFs. Method one used direct incorporation of Ti(OH)_x, Zr(OH)₄, and Ce(OH)₄ catalysts, whereas method two employed incorporation of Ti(OH)_x via a precursor molecule. Composite NFs prepared via method one resulted in greatly improved reaction rates over the respective pure metal hydroxides due to reduced aggregation of catalysts, with polymer/Ce(OH)₄ composite NFs having the fastest reaction rates out of method one materials. Interestingly, composite samples prepared by method two yielded the fastest reaction rates overall. This is because of the homogeneous distribution of the metal hydroxide catalyst throughout the NF. This homogeneous distribution created a hydroxyl-decorated NF surface with a greater number of exposed active sites for catalysis. The hydroxyl-decorated NF surface also resulted in an unexpected highly wettable composite NF, which also was found to contribute to the observed reaction rates. These results are not only promising for applications in chemical protective clothing but also show great potential for application in areas which need highly wettable membrane materials. This includes areas such as separators, antifouling membranes, and certain medical applications.