Advances in transition-metal (Zn, Mn, Cu)-based MOFs and their derivatives for anode of lithium-ion batteries

Recent Functionalized Strategies of Metal-Organic Frameworks for Anode Protection of Aqueous Zinc-Ion Battery

The inherent benefits of aqueous Zn-ion batteries (ZIBs), such as environmental friendliness, affordability, and high theoretical capacity, render them promising candidates for energy storage systems. Nevertheless, the Zn anodes of ZIBs encounter severe challenges, including dendrite formation, hydrogen evolution reaction, corrosion, and surface passivation. These would result in the infeasibility of ZIBs in practical situations. To this end, artificial interfaces with functionalized materials are crafted to protect the Zn anode. They have the capability to modulate the zinc ion flux in proximity to the electrode surface and shield it from aqueous electrolytes by leveraging either size effects or charge effects. Considering metal-organic frameworks (MOFs) with tunable pore size, chemical composition, and stable framework structures, they have emerged as effective materials for building artificial interfaces, prolonging the lifespan, and improving the unitization of Zn anode. In this review, the contributions of MOFs for protecting Zn anode, which mainly involves facilitating homogeneous nucleation, manipulating selective deposition, regulating ion and charge flux, accelerating Zn desolvation, and shielding against free water and anions are comprehensively summarized. Importantly, the future research trajectories of MOFs for the protection of the Zn anode are underscored, which may propose new perspectives on the practical Zn anode and endow the MOFs with high-value applications.

Trickier than It Looks: Isomerization between Five- and Six-Coordinated Zinc in Heterometallic Li2Zn2 Molecule

This report describes the synthesis and characterization of two heterobimetallic Li-Zn coordination isomers [Li2Zn2(tbaoac)6] (tbaoac = tert-butyl acetoacetato) that have been isolated separately by the same stoichiometric reaction run in different organic solvents. The 6-coordinated zinc isomer (6-Zn) was synthesized in acetone with high yield, while the 5-coordinated one (5-Zn) was readily obtained from ethanol. The 5-Zn isomer has a low solubility in organic solvents such as alkanes and haloalkanes, while its 6-Zn counterpart exhibits a good solubility in almost all common solvents. Two isomeric molecules feature similar centrosymmetric tetranuclear cyclic assemblies, which are different in their arrangement of tbaoac ligands. While all ligands act as μ2-type in the structure of 5-Zn, the two tbaoac groups chelating Li appear as μ3-type in 6-Zn, thus providing an additional coordination for Zn ions. However, the real structural transformation between these isomers was shown to be more complex than simply making or breaking a couple of Zn-O bonds. X-ray single-crystal structure analysis, powder X-ray diffraction, multinuclear NMR, DART mass spectrometry, ICP-OES analysis, and TGA have been employed for the characterization of the isomers. The combination of powder X-ray diffraction and 1H NMR investigation revealed that 6-Zn isomer can be quantitatively transformed to 5-Zn in ethanol, while the reverse conversion instantly takes place in acetone.

Atomic Design of Copper Active Sites in Pristine Metal-Organic Coordination Compounds for Electrocatalytic Carbon Dioxide Reduction

Electrocatalytic carbon dioxide reduction reaction (CO2RR) has emerged as a promising and sustainable approach to cut carbon emissions by converting greenhouse gas CO2 to value-added chemicals and fuels. Metal-organic coordination compounds, especially the copper (Cu)-based coordination compounds, which feature well-defined crystalline structures and designable metal active sites, have attracted much research attention in electrocatalytic CO2RR. Herein, the recent advances of electrochemical CO2RR on pristine Cu-based coordination compounds with different types of Cu active sites are reviewed. First, the general reaction pathways of electrocatalytic CO2RR on Cu-based coordination compounds are briefly introduced. Then the highly efficient conversion of CO2 on various kinds of Cu active sites (e.g., single-Cu site, dimeric-Cu site, multi-Cu site, and heterometallic site) is systematically discussed, along with the corresponding catalytic reaction mechanisms. Finally, some existing challenges and potential opportunities for this research direction are provided to guide the rational design of metal-organic coordination compounds for their practical application in electrochemical CO2RR.

Advances in Mn-Based MOFs and Their Derivatives for High-Performance Supercapacitor

As the most widely used metal material in supercapacitors, manganese (Mn)-based materials possess the merits of high theoretical capacitance, stable structure as well as environmental friendliness. However, due to poor conductivity and easy accumulation, the practical capacitance of Mn-based materials is far lower than that of theoretical value. Therefore, accurate structural adjustment and controllable strategies are urgently needed to optimize the electrochemical properties of Mn-based materials. Metal-organic frameworks (MOFs) are porous materials with high specific surface area (SSA), tunable pore size, and controllable structure. These features make them attractive as precursors or scaffold for the synthesis of metal-based materials and composites, which are important for electrochemical energy storage applications. Therefore, a timely and comprehensive review on the classification, design, preparation and application of Mn-based MOFs and their derivatives for supercapacitors has been given in this paper. The recent advancement of Mn-based MOFs and their derivatives applied in supercapacitor electrodes are particularly highlighted. Finally, the challenges faced by Mn-MOFs and their derivatives for supercapacitors are summarized, and strategies to further improve their performance are proposed. The aspiration is that this review will serve as a beneficial compass, guiding the logical creation of Mn-based MOFs and their derivatives in the future.

Large-Scale Synthesis of Highly Porous CuO/Cu2O/Cu/Carbon Derived from Aerogels for Lithium-Ion Battery Anodes

In this work, an effective strategy for the large-scale fabrication of highly porous CuO/Cu2O/Cu/carbon (P-Cu-C) has been established. Cu-cross-linked aerogels were first continuously prepared using a continuous flow mode to form uniform beads, which were transformed into P-Cu-C with a subsequent pyrolysis process. Various pyrolysis temperatures were used to form a series of P-Cu-C including P-Cu-C-250, P-Cu-C-200, P-Cu-C-350, and P-Cu-C-450 to investigate suitable pyrolysis conversion processes. The obtained P-Cu-C series were utilized as anodes of lithium-ion batteries, in which P-Cu-C-250 exhibited a higher reversible gravimetric capacity, excellent rate capability, and superior cycle stability. The enhanced behavior of P-Cu-C-250 was benefitted from the synergistic interaction between uniformly dispersed CuO, Cu2O, Cu nanoparticles, and highly graphitized carbon with a large surface area and highly porous structure. More importantly, the preparation of P-Cu-C-250 could be scaled up by taking advantage of the continuous flow synthesis mode, which may provide pilot- or industrial-scale applications. The large-scale fabrication proposed here may give a universal method to fabricate highly porous metal oxide-carbon anode materials for electrochemical energy conversion and storage applications. Porous CuO/Cu2O/Cu/carbon derived from Cu-crosslinked aerogels was used as Li-ion battery anode materials, exhibiting a high reversible areal capacity, large gravimetric capacity, superior cycling performance, and excellent rate capacity. A continuous preparation method is established to ensure the product scaled up.

Graphene Chainmail Shelled Dilute Ni─Cu Alloy for Selective and Robust Aqueous Phase Catalytic Hydrogenation

Cost-effective non-noble metal-based catalysts for selective hydrogenation with excellent activity, selectivity, and durability are still the holy grail. Herein, an oxygen-doped carbon (OC) chainmail encapsulated dilute Cu-Ni alloy is developed by simple pyrolysis of Cu/Ni-metal-organic framework. The CuNi0.05@OC catalyst displays superior performance for atmospheric pressure transfer hydrogenation of p-chloronitrobenzene and p-nitrophenol, and for hydrogenation of furfural, all in water and with exceptional durability. Comprehensive characterizations confirm the close interactions between the diluted Ni sites, the base Cu, and optimized three-layered graphene chainmail. Theoretical calculations demonstrate that the properly tuned lattice strain and Schottky junction can adjust electron density to facilitate specific adsorption on the active centers, thus enhancing the catalytic activity and selectivity, while the OC shell also offers robust protection. This work provides a simple and environmentally friendly strategy for developing practical heterogeneous catalysts that bring the synergistic effect into play between dilute alloy and functional carbon wrapping.

Green Synthesis of CoZn-Based Metal-Organic Framework (CoZn-MOF) from Waste Polyethylene Terephthalate Plastic As a High-Performance Anode for Lithium-Ion Battery Applications

The recycling of discarded polyethylene terephthalate (PET) plastics produced metal-organic frameworks can effectively minimize environmental pollution and promote sustainable economic development. In this study, we developed a method using NaOH in alcohol and ether solvent environments to degrade PET plastics for synthesizing terephthalic acid. The method achieved a 97.5% degradation rate of PET plastics under a reaction temperature of 80 °C for 60 min. We used terephthalic acid as a ligand from the degradation products to successfully synthesize two types of monometallic and bimetallic CoZn-MOF materials. We investigated the impact of different metal centers and solvents on the electrochemical performance of the MOF materials. The result showed that the MOF-DMF/H2O material maintained a specific capacity of 1485.5 mAh g-1 after 100 cycles at a current density of 500 mA g-1, demonstrating excellent rate capability and cycling stability. In addition, our finding showed that the performance difference might be attributed to the synergistic effect of bimetallic Co2+ and Zn2+ in MOF-DMF/H2O, rapid lithium-ion diffusion and electron transfer rates, and the absence of coordinating solvents. Additionally, the non-in situ X-ray powder diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy analysis results showed that lithium storage in the MOF-DMF/H2O electrode mainly depended on the aromatic C6 ring and carboxylate portions of the organic ligands in different charge and discharge states. Lithium ions can be reversibly inserted/removed into/from the electrode material. The physical adsorption on the MOF surface through electrostatic interactions enhanced both capacity and cycling stability. This research provides valuable insight for mitigating solid waste pollution, promoting sustainable economic development, and advancing the extensive applications of MOF materials in lithium-ion batteries.

Synthesis and Characterization of Zinc/Iron Composite Oxide Heterojunction Porous Anode Materials for High-Performance Lithium-Ion Batteries

Environmental pollution caused by the use of fossil fuels is becoming increasingly serious, necessitating the adoption of clean energy solutions. Lithium-ion batteries (LIBs) have attracted great attention due to their high energy density and currently occupy a dominant commercial position. Metal oxide materials have emerged as promising anode materials for the next generation of LIBs, thanks to their high theoretical capacity. However, the practical application of these materials is hindered by their substantial volume expansion during lithium storage and poor electrical conductivity. In this work, a zinc/iron bimetallic hybrid oxide composite, ZnO/ZnFe2O4/NC, is prepared using ZIF-8 as a precursor (ZIF-8, one of the metal organic frameworks). The N-doped porous carbon composite improves the volume change and optimizes the lithium-ion and electron transport. Meanwhile, the ZnFe2O4 and ZnO synergistically enhance the electrochemical activity of the anode through the built-in heterojunction to promote the reaction kinetics at the interface. As a result, the material delivers an excellent cycling performance of 604.7 mAh g-1 even after 300 cycles of 1000 mA g-1. This study may provide a rational design for the heterostructure and doping engineering of anodes for high-performance lithium-ion batteries.

Synthesis of Two-Dimensional (Cu-S)n Metal-Organic Framework Nanosheets Applied as Peroxidase Mimics for Detection of Glutathione

Facilely synthesized peroxidase-like nanozymes with high catalytic activity and stability may serve as effective biocatalysts. The present study synthesizes peroxidase-like nanozymes with multinuclear active sites using two-dimensional (2D) metal-organic framework (MOF) nanosheets and evaluates them for their practical applications. A simple method involving a one-pot bottom-up reflux reaction is developed for the mass synthesis of (Cu-S)n MOF 2D nanosheets, significantly increasing production quantity and reducing reaction time compared to traditional autoclave methods. The (Cu-S)n MOF 2D nanosheets with the unique coordination of Cu(I) stabilized in Cu-based MOFs demonstrate impressive activity in mimicking natural peroxidase. The active sites of the peroxidase-like activity of (Cu-S)n MOF 2D nanosheets were predominantly verified as Cu(I) rather than Cu(II) of other Cu-based MOFs. The cost-effective and long-term stability of (Cu-S)n MOF 2D nanosheets make them suitable for practical applications. Furthermore, the inhibition of the peroxidase-like activity of (Cu-S)n MOF nanosheets by glutathione (GSH) could provide a simple strategy for colorimetric detection of GSH against other amino acids. This work remarkably extends the utilization of (Cu-S)n MOF 2D nanosheets in biosensing, revealing the potential for 2D (Cu-S)n MOFs.

One-Dimensional Croconate-Based Fe-CP as a High-Performance Anode Material for Lithium-Ion Batteries

Coordination polymers (CPs) have attracted greater scientific attention as promising electrode materials for lithium-ion batteries (LIBs) due to their diverse and versatile structural chemistry. This study introduces a croconate-based one-dimensional CP, namely [Fe(C5O5)(H2O)3]n) (referred to as Fe-CP), as an efficient anode material with high-performance characteristics for rechargeable LIBs. The ligand with abundant redox sites coordinating to the transition metal ion endowed the anode material with a remarkable stability in the electrolyte, in addition to high capacity, high-rate capability, and high cycling performance during charging/discharging process. The Fe-CP has a unique chain-based supramolecular structure, setting it apart from other porous three-dimensional molecular materials. The presence of unrestricted channels between the chains facilitates the diffusion of lithium ions in this unique structure. When tested at 100 mA g-1 over a range of voltages between 0.01 and 2.4 V, the Fe-CP anode demonstrated a noteworthy specific capacity of 521 mA h g-1 over 140 cycles. Moreover, the Fe-CP anode material exhibited excellent rate performance and demonstrated favorable cyclability. Following exposure to high charging and discharging rates of 2 A g-1, the anode ultimately regained its initial capability when the current rate was back at 100 mA g-1.

Formulation and mechanism of copper tartrate - a novel anode material for lithium-ion batteries

Batteries play an increasingly critical role in the functioning of contemporary society. To ensure future proofing of battery technology, new materials and methods that overcome the current shortcomings need to be developed. Here we report the use of the inexpensive and off the shelf metal-carboxylate, copper tartrate, as a high-capacity anode material for lithium-ion batteries, providing a specific capacity of 744 mA h g-1 when cycled at 50 mA g-1. Additionally, an unusual capacity gain with cycling is investigated using advanced techniques including X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), and small and ultra-small angle neutron scattering (SANS and USANS), providing insight into the structure-performance relationship of the electrode. Subsequently, a novel method of in situ generation of the active material is demonstrated using the reaction between the parent acid, tartaric acid, and the copper current collector during electrode formulation. This serves to increase and stabilise the electrode performance, as well as to make use of a cheaper feedstock (tartaric acid), and reduce some of the "dead mass" of the copper current collector.

Tailoring the Microstructure of Porous Carbon Spheres as High Rate Performance Anodes for Lithium-Ion Batteries

Benefiting from their high surface areas, excellent conductivity, and environmental-friendliness, porous carbon nanospheres (PCSs) are of particular attraction for the anodes of lithium-ion batteries (LIBs). However, the regulation of carbon nanospheres with controlled pore distribution and graphitization for delivering high Li⁺ storage behavior is still under investigation. Here, we provide a facile approach to obtain PCSs with different microstructures via modulating the carbonization temperatures. With the processing temperature of 850 °C, the optimized PCSs exhibit an increased surface area, electrical conductivity, and enhanced specific capacity (202 mA h g^-1 at 2 A g^-1) compared to the PCSs carbonized at lower temperatures. Additionally, PCSs 850 provide excellent cyclability with a capacity retention of 83% for 500 cycles. Such work can pave a new pathway to achieve carbon nanospheres with excellent performances in LIBs.

Recent Advances in Metal-Organic Frameworks (MOFs) and Their Composites for Non-Enzymatic Electrochemical Glucose Sensors

In recent years, with pressing needs such as diabetes management, the detection of glucose in various substrates has attracted unprecedented interest from researchers in academia and industry. As a relatively new glucose sensor, non-enzymatic target detection has the characteristics of high sensitivity, good stability and simple manufacturing process. However, it is urgent to explore novel materials with low cost, high stability and excellent performance to modify electrodes. Metal-organic frameworks (MOFs) and their composites have the advantages of large surface area, high porosity and high catalytic efficiency, which can be utilized as excellent materials for electrode modification of non-enzymatic electrochemical glucose sensors. However, MOFs and their composites still face various challenges and difficulties that limit their further commercialization. This review introduces the applications and the challenges of MOFs and their composites in non-enzymatic electrochemical glucose sensors. Finally, an outlook on the development of MOFs and their composites is also presented.

Advances of Electroactive Metal-Organic Frameworks

The preparation of electroactive metal-organic frameworks (MOFs) for applications of supercapacitors and batteries has received much attention and remarkable progress during the past few years. MOF-based materials including pristine MOFs, hybrid MOFs or MOF composites, and MOF derivatives are well designed by a combination of organic linkers (e.g., carboxylic acids, conjugated aromatic phenols/thiols, conjugated aromatic amines, and N-heterocyclic donors) and metal salts to construct predictable structures with appropriate properties. This review will focus on construction strategies of pristine MOFs and hybrid MOFs as anodes, cathodes, separators, and electrolytes in supercapacitors and batteries. Descriptions and discussions follow categories of electrochemical double-layer capacitors (EDLCs), pseudocapacitors (PSCs), and hybrid supercapacitors (HSCs) for supercapacitors. In contrast, Li-ion batteries (LIBs), Lithium-sulfur batteries (LSBs), Lithium-oxygen batteries (LOBs), Sodium-ion batteries (SIBs), Sodium-sulfur batteries (SSBs), Zinc-ion batteries (ZIBs), Zinc-air batteries (ZABs), Aluminum-sulfur batteries (ASBs), and others (e.g., LiSe, NiZn, H⁺ , alkaline, organic, and redox flow batteries) are categorized for batteries.

In Situ Construction of Zn2Mo3O8/ZnO Hierarchical Nanosheets on Graphene as Advanced Anode Materials for Lithium-Ion Batteries

Transition-metal oxides as anodes for lithium-ion batteries (LIBs) have attracted enormous interest because of their high theoretical capacity, low cost, and high reserve abundance. Unfortunately, they commonly suffer from poor electronic and ionic conductivity and relatively large volume expansion during discharge/charge processes, thereby triggering inferior cyclic performance and rate capability. Herein, a molybdenum-zinc bimetal oxide-based composite structure (Zn₂Mo₃O₈/ZnO/rGO) with rectangular Zn₂Mo₃O₈/ZnO nanosheets uniformly dispersed on reduced graphene oxide (rGO) has been prepared by using a simple and controllable cyanometallic framework template method. The Zn₂Mo₃O₈/ZnO rectangular nanosheets with desirable porous features are composed of nanocrystalline subunits, facilitating the exposure of abundant active sites and providing sufficient contact with the electrolyte. Benefiting from the composition and structural merits as well as the induced synergistic effects, the Zn₂Mo₃O₈/ZnO/rGO composite as LIB anodes delivers superior electrochemical properties, including high reversible capacity (960 mA h g^-1 after 100 cycles at 200 mA g^-1), outstanding rate performance (417 mA h g^-1 at 10,000 mA g^-1), and admirable long-term cyclic stability (862 mA h g^-1 after 400 cycles at 1000 mA g^-1). The mechanism of lithium storage and the formation of SEI film are systematically elucidated. This work provides an effective strategy for synthesizing promising Mo-cluster compound-based anodes for high-performance LIBs.

On electrochemistry of metal-organic framework Zn2(EDTA)(H2O)

Metal-organic compounds (MOFs) are a class of substances composed of metal ions or clusters coordinated to organic ligands to form one-, two-, or three-dimensional structures. Due to their high porosity, excellent adsorption and catalytic activity, as well as the possibility of simultaneous implementation of various charge accumulation mechanisms, they can be used as electrode materials for metal-ion batteries. However, a significant disadvantage is that most MOFs have a low electrical conductivity, and the production of conductive MOFs is a costly, time-consuming and technically difficult process. In this work, we developed a method for synthesizing the Zn₂(EDTA)(H₂O) MOF composite and studied the possibility of using it as an anode material for sodium-ion batteries based on aqueous electrolytes. The structure and morphology of the compound was studied using XRD, IR, TGA and SEM. Using cyclic voltammetry, the electrochemical characteristics of the organometallic framework in alkaline electrolytes 1, 10 M NaOH, as well as in saturated aqueous electrolyte NaClO₄, were evaluated. It has been established that the studied compound does not give a satisfactory electrochemical response in aqueous electrolytes (both in alkaline and neutral media) due to the strong degradation of the electrode material, which is associated with the high solubility of this MOF representative. Cyclic voltammetric studies showed the presence of two redox processes due to the release of metallic zinc from an electrolyte solution, where two forms of zinc exist in equilibrium (the ZnEDTA complex and the free zinc cation). Therefore, we concluded, it is not possible to use this material as an anode for water-based sodium-ion batteries in contrary to a published research study.

Emerging 2D Copper-Based Materials for Energy Storage and Conversion: A Review and Perspective

2D materials have shown great potential as electrode materials that determine the performance of a range of electrochemical energy technologies. Among these, 2D copper-based materials, such as Cu-O, Cu-S, Cu-Se, Cu-N, and Cu-P, have attracted tremendous research interest, because of the combination of remarkable properties, such as low cost, excellent chemical stability, facile fabrication, and significant electrochemical properties. Herein, the recent advances in the emerging 2D copper-based materials are summarized. A brief summary of the crystal structures and synthetic methods is started, and innovative strategies for improving electrochemical performances of 2D copper-based materials are described in detail through defect engineering, heterostructure construction, and surface functionalization. Furthermore, their state-of-the-art applications in electrochemical energy storage including supercapacitors (SCs), alkali (Li, Na, and K)-ion batteries, multivalent metal (Mg and Al)-ion batteries, and hybrid Mg/Li-ion batteries are described. In addition, the electrocatalysis applications of 2D copper-based materials in metal-air batteries, water-splitting, and CO₂ reduction reaction (CO₂ RR) are also discussed. This review also discusses the charge storage mechanisms of 2D copper-based materials by various advanced characterization techniques. The review with a perspective of the current challenges and research outlook of such 2D copper-based materials for high-performance energy storage and conversion applications is concluded.

Co-catalyst and heterojunction dual strategies to induce photogenerated charge separation for efficient hydrogen evolution of CdS

The construction of heterojunctions is considered to be an important means to promote efficient electron-hole separation in photocatalysts. However, photocatalysts have poor light absorption ability and a relatively small chance of capturing H⁺, and the stability needs to be improved. In this work, a non-precious metal co-catalyst Cu₃P was introduced for the successful construction of p-n heterojunctions from NiO and CdS to promote charge separation while expanding the light absorption capacity and increasing the chance of H⁺ capture, thus enhancing the photocatalytic hydrogen precipitation activity and stability. The overall photocatalytic performance was improved by continuously optimizing the loading of NiO and Cu₃P. Satisfyingly, using a 5 W LED lamp as the light source, the hydrogen evolution rate of the composite photocatalyst 15NC@Cu-10 in 10 vol% lactic acid solution is 15 612.0 μmol h^-1 g^-1, and the AQE reaches 10.4%. XPS analysis confirmed the direction and path of electron transfer. This synergistic strategy of co-catalyst modification of p-n heterojunctions provides a unique insight into the preparation of efficient and stable photocatalysts and also expands the applications of MOFs and their derivatives in the field of photocatalysis.

Hofmann Ni-Pz-Ni Metal-Organic Frameworks Decorated by Graphene Oxide Enabling Lithium Storage with Pseudocapacitance Contribution

Hofmann metal-organic frameworks (MOFs) are a variety of hybrid inorganic-organic polymers with a stable framework, plentiful adjustable pore size, and redox active sites, which display great application potential in energy storage. Unfortunately, the rapid and uncontrollable rate of coordination reaction results in a large size and an anomalous morphology, and the low electrical conductivity also severely limited further development, so there are few literature studies on Hofmann MOFs as anode materials for rechargeable batteries. Introducing graphene oxide can not only greatly facilitate the formation of a continuous conductive network but also effectively anchor and disperse MOF particles by utilizing the two-dimensional planar structure, thus reducing the sizes and agglomeration of particles. In this work, various mass ratios of graphene oxide with 3D Hofmann Ni-Pz-Ni MOFs were prepared via a simple one-pot solvothermal method. Benefiting from the gradually increasing capacitance characteristic during the continuous charge/discharge process, the Ni-Pz-Ni/GO-20% electrode exhibits a great reversible capacity of 896.1 mAh g^-1 after 100 cycles and excellent rate capability, which will lay a theoretical foundation for exploring the high-performance Hofmann MOFs in the future.

Recent Progress of Advanced Conductive Metal-Organic Frameworks: Precise Synthesis, Electrochemical Energy Storage Applications, and Future Challenges

Metal-organic frameworks (MOFs) with diverse composition, tunable structure, and unique physicochemical properties have emerged as promising materials in various fields. The tunable pore structure, abundant active sites, and ultrahigh specific surface area can facilitate mass transport and provide outstanding capacity, making MOFs an ideal active material for electrochemical energy storage and conversion. However, the poor electrical conductivity of pristine MOFs severely limits their applications in electrochemistry. Developing conductive MOFs has proved to be an effective solution to this problem. This review focuses on the design and synthesis of conductive MOF composites with judiciously chosen conducting materials, pristine MOFs, and assembly methods, as well as the preparation of intrinsically conductive MOFs based on building 2D π-conjugated structures, introducing mixed-valence metal ions/redox-active ligands, designing π-π stacked pathways, and constructing infinite metal-sulfur chains (-M-S-)_∞ . Furthermore, recent progress and challenges of conductive MOFs for energy storage and conversion (supercapacitors, Li-ion batteries, Li-S batteries, and electrochemical water splitting) are summarized.

Waste PET Plastic-Derived CoNi-Based Metal-Organic Framework as an Anode for Lithium-Ion Batteries

Recycling waste PET plastics into metal-organic frameworks is conducive to both pollution alleviation and sustainable economic development. Herein, we have utilized waste PET plastic to synthesize CoNi-MOF applied to lithium battery anode materials via a low-temperature solvothermal method for the first time. The preparation process is effortless, and the sources' conversion rate can reach almost 100%. In addition, the anode performance of MOFs with various Co/Ni mole ratios was investigated. The as-synthesized Co0.8Ni-MOF exhibits excellent crystallinity, purity, and electrochemical performance. The initial discharge and charge capacities are 2496 and 1729 mAh g-1, respectively. Even after 200 cycles, the Co0.8Ni-MOF electrode can exhibit a high Coulombic efficiency of over 99%. Consequently, given the environmental and economic benefits, the Co0.8Ni-MOF derived from waste PET plastic is thought to be an appealing anode material for lithium-ion batteries.

Double-layer Composite Gel Polymer Electrolyte for Organic Sodium-metal Batteries

Organic cathode materials have the advantages of abundant raw materials, high theoretical specific capacity, controllable structure and easy recycling. Pyrene-4,5,9,10-tetraone (PTO), as one of the typical organic cathode materials, achieves efficient storage and release of Na + . However, its good solubility in traditional organic liquid electrolytes is detrimental to the cyclic stability of batteries. To address this issue, the double-layer composite gel polymer electrolyte (DLCGPE) consisting of poly (ionic liquid) gel polymer electrolyte and plastic crystal electrolyte was developed and applied to organic sodium-metal batteries. This as-prepared DLCGPE displays an ionic conductivity of 2.17×10 -4 S cm -1 and an electrochemical window of 4.8 V. The as-fabricated sodium-symmetric batteries maintain interfacial stability after 500 h of cycling. Furthermore, the PTO/Na batteries could also retain a specific capacity of 201 mAh g -1 after 300 cycles, confirming that DLCGPE achieves the purpose of inhibiting PTO dissolution and maintaining batteries stability. This work broadens the application of asymmetric electrolytes in organic secondary battery.

Interpenetrated N-rich MOF derived vesicular N-doped carbon for high performance lithium ion battery

High-performance lithium ion batteries (LIBs) juggling high reversible capacity, excellent rate capability and ultralong cycle stability are urgently needed for all electronic devices. Here we report employing a vesicle-like porous N-doped carbon material (abbr. N/C-900) as a highly active anode for LIBs to balance high capacity, high rate and long life. The N/C-900 material was fabricated by pyrolysis of a designed crystal MOF LCU-104, which exhibits a graceful two-fold interpenetrating structural feature of N-rich nanocages {Zn₆(dttz)₄} linked through an N-donor ligand bpp (H₃dttz = 4,5-di(1H-tetrazol-5-yl)-2H-1,2,3-triazole, bpp = 1,3-bis(4-pyridyl)propane). The features of LCU-104 combine high N content (35.1%), interpenetration, and explosive characteristics, which endow the derived N/C material with optimized N-doping for tuning its chemical and electronic structure, a suitably thicker wall to enhance its stability, and a vesicle-like structure to improve its porosity. As an anode material for LIBs, N/C-900 delivers a highly reversible capacity of ca. 734 mA h g^-1 at a large current density of 1 A g^-1 until the 2000th cycle, revealing its ultralong cycle stability and excellent rate capability. The unique structure and preferential interaction between abundant pyridinic N active sites and Li atoms are responsible for the improved excellent lithium storage capacity and durability performances of the anode according to analysis of the results of computational modeling.

A Spinel Tin Ferrite with High Lattice-Oxygen Anchored on Graphene-like Porous Carbon Networks for Lithium-Ion Batteries with Super Cycle Stability and Ultra-fast Rate Performances

A new type of nano-SnFe₂O₄ with stable lattice-oxygen and abundant surface defects anchored on ultra-thin graphene-like porous carbon networks (SFO@C) is prepared for the first time by an interesting freezing crystallization salt template method. The functional composite has excellent rate performance and long-term cycle stability for lithium-ion battery (LIB) anodes due to the stable structure, improved conductivity, and shortened migrating distance for lithium-ions, which are derived from the higher lattice-oxygen of SnFe₂O₄, abundant porous carbon networks and surface defects, and smaller nanoparticles. Under the ultra-high current density of 10, 15, and 20 A g^-1 cycling for 1000 times, the SFO@C can provide high reversible capacities of 522.2, 362.5, and 361.1 mAh g^-1, respectively. The lithium-ion storage mechanism of the composite was systematically studied for the first time by in situ X-ray diffraction (XRD), ex situ XRD and scanning electron microscopy (SEM), and density functional theory (DFT) calculations. The results indicate that the existence of Li₂O and metallic Fe during the lithiation/delithiation process is a key reason for reducing the initial lithium-ion storage reversibility but increasing the rate performance and capacity stability in the subsequent cycles. DFT calculations show that lithium-ions are more easily adsorbed on the (111) crystal plane with a much lower adsorption energy of -7.61 eV than other planes, and the Fe element is the main acceptor of electrons. Moreover, the kinetics investigation indicates that the lithium-ion intercalation and deintercalation in SFO@C are mainly controlled by the pseudocapacitance behavior, which is favorable to enhancing the rate performance. The research provides a new strategy for designing LIB electrode materials with a stable structure and outstanding lithium-ion storage performance.

Artificial Monovalent Metal Ion-Selective Fluidic Devices Based on Crown Ether@Metal-Organic Frameworks with Subnanochannels

Precise regulation of ion transport through nanoscale pores will profoundly impact diverse fields from separation to energy conversion but is still challenging to achieve in artificial ion channels. Herein, inspired by the exquisite ion selectivity of biological Na⁺ channels, we have successfully fabricated hierarchically grown metal-organic frameworks (MOFs) on an asymmetrical substrate assisted by atomically thin nanoporous graphene. Efficient separation of monovalent metal ions is realized by encapsulating 18-crown-6 into MOF crystals. The resulting 18-crown-6@ZIF-67/ZIF-8 device, with subnanochannels and specific K⁺ binding sites, shows an ultrahigh Li⁺ conductivity of 1.46 × 10^-2 S cm^-1 and selectivities of 9.56 and 6.43 for Li⁺/K⁺ and Na⁺/K⁺, respectively. The Li⁺ conductivity is around 1-2 orders of magnitude higher than reported values for the other MOF materials. It is the first time that MOFs with subnanochannels realize selective transport of Na⁺ (ionic diameter of 1.9 Å) over K⁺ (2.6 Å) based on subangstrom differences in their ionic diameter. Our work opens new avenues to develop crown ether@MOF platforms toward efficient ion transistors, fluidic logic devices, and biosensors.

Hierarchical multi-yolk-shell copper oxide@copper-1, 3, 5-benzenetricarboxylate as an ultrastable anode for lithium ion batteries

The capacity attenuation of transition metal oxides (TMOs) and metal-organic frameworks (MOFs) is the obstacle for practical application in lithium ion batteries, due to the extensive volume variation upon charge/discharge cycles. Herein, a hierarchical composite material with copper oxide (CuO) multi-yolks and copper-1, 3, 5-benzenetricarboxylate (Cu-BTC) shell is synthesized by a facile method to study the effect of the hierarchical structure on the electrochemical performance. The porosity and pore volume of CuO@Cu-BTC composites are optimized to buffer the volume change and facilitate the infiltration of electrolytes by altering reaction conditions. The CuO@Cu-BTC (20 h) with the largest surface area and pore volume delivers an excellent reversible capacity of 780.7 mAh g^-1 at 200 mA g^-1 after 100 cycles, and ultrastable long-term performance with a specific capacity of 569 mAh g^-1 at a current density of 1000 mA g^-1 after 900 cycles. The corresponding full battery shows moderate capacity retention from 149.4 to 125.8 mAh g^-1 after 70 cycles, with a specific capacity retention of 84.2%, based on the mass of lithium iron phosphate (LiFePO₄) at 0.2 C (1 C = 170 mA g^-1). This strategy applies copper oxide as the metal source of the coordination compound, as well as the internal yolks, which can be extended to the in-situ construction of other hierarchical composites, providing a new avenue for practical application of TMOs and MOFs as anode materials.

Self-supported metal-organic framework-based nanostructures as binder-free electrodes for supercapacitors

Metal-organic frameworks (MOFs), an interesting class of functional inorganic materials, have recently emerged as suitable electrode materials or templates/precursors of electrode materials for supercapacitors (SCs). The key in utilizing MOF-based electrode materials is to address the low electronic conductivity and poor stability issues. Therefore, the rational design and fabrication of self-supported binder-free electrodes is considered the most promising strategy to address these challenges. In this review, we summarize the recent advances in the design and manufacture of self-supported MOF-based nanostructures and their use as binderless electrodes for SCs, especially over the last five years. The synthesis strategies for constructing pristine MOFs, MOF composites and MOF derivative arrays are overviewed. By highlighting the advantages and challenges of each class of electrode materials, we hope that this review will provide some insights into the rational design of MOF-based electrode materials to promote the future development of this highly exciting field.

Solvent-Mediated Synthesis of Hierarchical MOFs and Derived Urchin-Like Pd@SC/HfO2 with High Catalytic Activity and Stability

Carbon materials with hierarchical morphologies, pores, and compositions have attracted extraordinary attention due to their unique structural advantages and widespread applications. However, their controllable synthesis remains a grand challenge. Herein, a solvent-mediated strategy was demonstrated for the preparation of an urchin-like superstructure via modulating the hydrothermal condition (acetic acid/water ratio) of metal-organic frameworks (MOFs). The direct pyrolysis of a hierarchical NUS-6 precursor produced a well-defined carbon-based composite consisting of sulfur-doped carbon (SC) and HfO₂ with an urchin-like morphology and micro-/mesoporosity, while the doped S sites and oxygen vacancies of HfO₂ can help to anchor and activate Pd nanoparticles (NPs) through the strong host-guest interaction, which was further confirmed by the calculated results of the binding energy and differential charge density through density functional theory (DFT). The synthesized Pd@SC/HfO₂ composite exhibited extremely high catalytic activity and stability toward the water-phase hydrodeoxygenation of vanillin (conversion >99%, selectivity >99%), as well as good universality for the hydrogenation of a series of unsaturated hydrocarbons in an aqueous system. Remarkably, the catalytic activity and structural stability of Pd@SC/HfO₂ were largely maintained even after successive 10 cycles.

Microporous hierarchically Zn-MOF as an efficient catalyst for the Hantzsch synthesis of polyhydroquinolines

A three-dimensional walnut-like Zn-based MOF microsphere system was designed and synthesized via hydrothermal reaction of zinc salt with 4,6-diamino-2-pyrimidinethiol as a tridentate ligand. Besides, Zn ions were coordinated to the functional groups of the ligand to give a novel Zn-MOF microsphere material. Afterward, the resultant material was thoroughly characterized using various analysis and physico-chemical methods; including, FT-IR, XRD, TGA, EDX, X-ray mapping, SEM, TEM, and BET analysis. The Zn-MOF microspheres were utilized in the Hantzsch reaction for a selective synthesis of asymmetric polyhydroquinolines, using various aromatic aldehydes. Our strategy aims at providing a controlled synthesis of hierarchically nanoporous Zn-MOF microspheres with a well-defined morphology, structure, and excellent catalytic properties. Besides, it would result in having a promising heterogeneous catalyst for a selective synthesis with good yields, short reaction time, a low limit of steric hindrance and electronic effects. Moreover, the heterogeneity of the catalyst is further tested with hot filtration and also the reusability results point.

A novel flower-like hierarchical aluminum-based MOF anode for high-performance lithium-ion batteries

Metal–organic frameworks, an emerging electrode material, are mostly synthesized by using costly, limited reserve and environmentally unfriendly metals as nodes.

Metal-organic frameworks and their derivatives as electrode materials for Li-ion batteries: a mini review

In recent decades, in order to obtain more excellent performance and wider application of rechargeable lithium-ion batteries (LIBs), researchers have been exploring potential electrode materials. MOFs possess attractive features, such...

Tetrathiafulvalene-Cobalt Metal-Organic Frameworks for Lithium-Ion Batteries with Superb Rate Capability

Although pristine metal-organic framework (MOF) anodes for lithium-ion batteries (LIBs) show moderate activities and relatively stable cycling, the poor rate capability of the MOF anodes limited their applications in the development of a new generation of energy storage. Herein, the electric active Co^II ion is selected to coordinate with redox-active S-rich tetrathiafulvalene (TTF) derivatives to create two TTF-Co-MOFs, formulated as [Co₂(py-TTF-py)₂(BDC)₂]·2DMF·H₂O (TTF-Co-MOF 1) and [Co₂(py-TTF-py)₂(BPDC)₂]·3DMF·3H₂O (TTF-Co-MOF 2), where py-TTF-py = 2,6-bis(4'-pyridyl)tetrathiafulvalene, H₂BDC = terephthalic acid, H₂BPDC = biphenyl-4,4'-dicarboxylic acid, and DMF = N,N-dimethylformamide. Crystallographic characterization indicated that the two MOFs possess similar 2-fold-interpenetrating 3D frameworks but with two different pore sizes. The pore-size-dependent performances of the TTF-Co-MOFs were explored to optimize the MOFs as the anode materials for LIBs. TTF-Co-MOF 1 presents a high reversible specific capacity of 1186.6 mAh g^-1 at 200 mA g^-1 after 287 cycles. The rate capability is greatly enhanced by the introduction of Co^II into TTF-based MOFs with specific capacities of 1028.6 mAh g^-1 at 5 A g^-1 and 966.5 mAh g^-1 at 10 A g^-1. On the basis of the series analysis of theoretical calculations, electrochemical impedance spectroscopy, and crystal structures, it is found that the Co^II metal centers play a bridging role in charge transport within the MOF framework, which is beneficial for the transportation of Li ions. The competitive performances of TTF-Co-MOF 1 are attributed to the synergistic effect of the Co^II metal centers and S-rich TTF ligand as well as suitable porosity. The study shed some light for the fabrication of advanced energy storage devices through the rational design of MOF-based anode materials.

Growth Mechanism of Micro/Nano Metal Dendrites and Cumulative Strategies for Countering Its Impacts in Metal Ion Batteries: A Review

Metal-ion batteries are capable of delivering high energy density with a longer lifespan. However, they are subject to several issues limiting their utilization. One critical impediment is the budding and extension of solid protuberances on the anodic surface, which hinders the cell functionalities. These protuberances expand continuously during the cyclic processes, extending through the separator sheath and leading to electrical shorting. The progression of a protrusion relies on a number of in situ and ex situ factors that can be evaluated theoretically through modeling or via laboratory experimentation. However, it is essential to identify the dynamics and mechanism of protrusion outgrowth. This review article explores recent advances in alleviating metal dendrites in battery systems, specifically alkali metals. In detail, we address the challenges associated with battery breakdown, including the underlying mechanism of dendrite generation and swelling. We discuss the feasible solutions to mitigate the dendrites, as well as their pros and cons, highlighting future research directions. It is of great importance to analyze dendrite suppression within a pragmatic framework with synergy in order to discover a unique solution to ensure the viability of present (Li) and future-generation batteries (Na and K) for commercial use.