Emerging role of nanoclays in cancer research, diagnosis, and therapy

Carrier capability of halloysite nanotubes for the intracellular delivery of antisense PNA targeting mRNA of neuroglobin gene

Peptide nucleic acid (PNA) is a DNA mimic that shows good stability against nucleases and proteases, forming strongly recognized complementary strands of DNA and RNA. However, due to its feeble ability to cross the cellular membrane, PNA activity and its targeting gene action is limited. Halloysite nanotubes (HNTs) are a natural and low-cost aluminosilicate clay. Because of their peculiar ability to cross cellular membrane, HNTs represent a valuable candidate for delivering genetic materials into cells. Herein, two differently charged 12-mer PNAs capable of recognizing as molecular target a 12-mer DNA molecule mimicking a purine-rich tract of neuroglobin were synthetized and loaded onto HNTs by electrostatic attraction interactions. After characterization, the kinetic release was also assessed in media mimicking physiological conditions. Resonance light scattering measurements assessed their ability to bind complementary single-stranded DNA. Furthermore, their intracellular delivery was assessed by confocal laser scanning microscopy on living MCF-7 cells incubated with fluorescence isothiocyanate (FITC)-PNA and HNTs labeled with a probe. The nanomaterials were found to cross cellular membrane and cell nuclei efficiently. Finally, it is worth mentioning that the HNTs/PNA can reduce the level of neuroglobin gene expression, as shown by reverse transcription-quantitative polymerase chain reaction and western blotting analysis.

Comparison of Synthetic Pathways for Obtaining Fluorescent Nanomaterials Based on Halloysite and Carbon Dots for Potential Biological Sensing

Recently, fluorescent sensors have gained considerable attention due to their high sensitivity, low cost and noninvasiveness. Among the different materials that can be used for this purpose, carbon dots (CDs) represent valuable candidates for applications in sensing. These, indeed, are easily synthesized, show high quantum yield and are highly biocompatible. However, it was pointed out that the photoluminescence properties of these nanomaterials are strictly dependent on the synthetic and purification methods adopted. The presence of halloysite nanotubes (HNTs), a natural, low cost and biocompatible clay mineral, has been found to be efficient in obtaining small and highly monodispersed CDs without long and tedious purification techniques. Herein, we report the comparison of synthetic pathways for obtaining halloysite-N-doped CDs (HNTs-NCDs) that could be used in biological sensing. One was based on the synthesis of N-doped CDs by a bottom-up approach on HNTs' surface by a MW pyrolysis process; the other one was based on the post-modification of pristine N-doped CDs with halloysite derivatives. The evaluation of the best synthetic route was performed by different physico-chemical techniques. It was found that the bottom-up approach led to the formation of N-doped CDs with different functional groups onto the HNTs' surface. This evidence was also translated in the different fluorescence quantum yields and the existence of several functional groups in the obtained materials was investigated by potentiometric titrations. Furthermore, the ability of the synthesized nanomaterials as sensors for Fe3+ ions detection was assessed by spectroscopic measurements, and the cellular uptake was verified by confocal/fluorescence microscopies as well.

Natural Nano-Minerals (NNMs): Conception, Classification and Their Biomedical Composites

Natural nano-minerals (NNMs) are minerals that are derived from nature with a size of less than 100 nm in at least one dimension in size. NNMs have a number of excellent properties due to their unique nanostructure and have been applied in various fields in recent years. They are rising stars in various disciplines, such as materials, biomedicine, and chemistry, taking advantage of their huge surface area, multiple active sites, excellent adsorption capacity, large quantity, low cost, and nontoxicity, etc. To provide a more comprehensive overview of NNMs and the biomedical applications of NNMs-based nanocomposites, this review classifies NNMs into three types by dimension, lists the structure and properties of typical NNMs, and illustrates their biomedical applications. Furthermore, a novel concept of natural nanomineral medical materials (NNMMs) is proposed, focusing on the medical value of NNMs. In addition, this review attempts to address the current challenges and delineate future directions for the advancement of NNMs. With the deepening of biomedical applications, it is believed that NNMMMs will inevitably play an important role in the field of human health and contribute to its promotion.

Water-dispersible X-ray scintillators enabling coating and blending with polymer materials for multiple applications

Developing X-ray scintillators that are water-dispersible, compatible with polymeric matrices, and processable to flexible substrates is an important challenge. Herein, Tb3+-doped Na5Lu9F32 is introduced as an X-ray scintillating material with steady-state X-ray light yields of 15,800 photons MeV-1, which is generated as nanocrystals on halloysite nanotubes. The obtained product exhibits good water-dispersibility and highly sensitive luminescence to X-rays. It is deposited onto a polyurethane foam to afford a composite foam material with dose-dependent radioluminescence. Moreover, the product is dispersed into polymer matrixes in aqueous solution to prepare rigid or flexible scintillator screen for X-ray imaging. As a third example, it is incorporated multilayer hydrogels for information camouflage and multilevel encryption. Encrypted information can be recognized only by X-ray irradiation, while the false information is read out under UV light. Altogether, we demonstrate that the water-dispersible scintillators are highly promising for aqueous processing of radioluminescent, X-ray imaging, and information encrypting materials.

Laponite for biomedical applications: An ophthalmological perspective

Clay minerals have been applied in biomedicine for thousands of years. Laponite is a nanostructured synthetic clay with the capacity to retain and progressively release drugs. In recent years there has been a resurgence of interest in Laponite application in various biomedical areas. This is the first paper to review the potential biomedical applications of Laponite in ophthalmology. The introduction briefly covers the physical, chemical, rheological, and biocompatibility features of different routes of administration. After that, emphasis is placed on 1) drug delivery for antibiotics, anti-inflammatories, growth factors, other proteins, and cancer treatment; 2) bleeding prevention or treatment; and 3) tissue engineering through regenerative medicine using scaffolds in intraocular and extraocular tissue. Although most scientific research is not performed on the eye, both the findings and the new treatments resulting from that research are potentially applicable in ophthalmology since many of the drugs used are the same, the tissue evaluated in vitro or in vivo is also present in the eye, and the pathologies treated also occur in the eye. Finally, future prospects for this emerging field are discussed.

Exploring the Potential of Montmorillonite as an Antiproliferative Nanoagent against MDA-MB-231 and MCF-7 Human Breast Cancer Cells

Unlike MCF-7 cells, MDA-MB-231 cells are unresponsive to hormone therapy and often show resistance to chemotherapy and radiotherapy. Here, the antiproliferative effect of biocompatible montmorillonite (Mt) nanosheets on MDA-MB-231 and MCF-7 human breast cancer cells was evaluated by MTT assay, flow cytometry, and qRT-PCR. The results showed that the Mt IC50 for MDA-MB-231 and MCF-7 cells in a fetal bovine serum (FBS)-free medium was ~50 and ~200 µg/mL, and in 10% FBS medium ~400 and ~2000 µg/mL, respectively. Mt caused apoptosis in both cells by regulating related genes including Cas-3, P53, and P62 in MDA-MB-231 cells and Bcl-2, Cas-8, Cas-9, P53, and P62 in MCF-7 cells. Also, Mt arrested MCF-7 cells in the G0/G1 phase by altering Cyclin-D1 and P21 expression, and caused sub-G1 arrest and necrosis in both cells, possibly through damaging the mitochondria. However, fewer gene expression changes and more sub-G1 arrest and necrosis were observed in MDA-MB-231 cells, confirming the higher vulnerability of MDA-MB-231 cells to Mt. Furthermore, MDA-MB-231 cells appeared to be much more vulnerable to Mt compared to other cell types, including normal lung fibroblast (MRC-5), colon cancer (HT-29), and liver cancer (HepG2) cells. The higher vulnerability of MDA-MB-231 cells to Mt was inferred to be due to their higher proliferation rate. Notably, Mt cytotoxicity was highly dependent on both the Mt concentration and serum level, which favors Mt for the local treatment of MDA-MB-231 cells. Based on these results, Mt can be considered as an antiproliferative nanoagent against MDA-MB-231 cells and may be useful in the development of local nanoparticle-based therapies.

Microvesicle-Embedded Solid-liquid Composite Coating for the Tribological Behavior Regulation and Long-Acting Lubrication

Friction interfaces in liquid-embedded composite lubrication coatings commonly comprise a combination of discontinuous fluid films and rough solid contact surfaces, which together ensure easy shearing and a prolonged wear life. However, achieving high efficacy in mixed lubrication poses a challenge due to the conflicting nature of enhanced migration freedom for the liquid lubricant and increased mechanical strength of the solid matrix. Recent efforts have focused on incorporating reinforcing fillers to develop multicomponent, multiphase composites that can address this paradox. Here, we describe a modified attapulgite (APT) with strong biphasic wettability via the oil decompressive osmosis treatment on APT nanocontainers grafted with long nonpolar alkyl chains. This modified APT enables control over the size, distribution, and mobility of lubricant droplets by constructing a Pickering emulsion and toughens the solid-phase matrix through dispersion strengthening. Additionally, the introduction of APT induces the formation of a solid tribofilm during friction, which possesses a higher oil adsorption capacity, as verified through first-principles calculations based on density functional theory (DFT). Consequently, the fluid films can be replenished by the fracture of nanocontainers and adsorption from the bulk phase; further comprehensive and effective regulation of the friction interface leads to low friction and wear.

Nanoclays and mineral derivates applied to pesticide water remediation

Although pesticides are vital in agroecosystems to control pests, their indiscriminate use generates innumerable environmental problems daily. Groundwater and surface water networks are the most affected environmental matrices. Since these water basins are mainly used to obtain water for human consumption, it is a challenge to find solutions to pesticide contamination. For these reasons, development of efficient and sustainable remedial technologies is key. Based on their unique properties including high surface area, recyclability, environmental friendliness, tunable surface chemistry and low cost, nanoclays and derived minerals emerged as effective adsorbents towards environmental remediation of pesticides. This study provides a comprehensive review of the use of nanoclays and mineral derivatives as adsorbents for pesticides in water. For this purpose, the characteristics of existing pesticides and general aspects of the relevant clays and minerals are discussed. Furthermore, the study provides insightful discussion on the potential application of nanoclays and their derivatives toward the mitigation of pesticide pollution in the environment. Finally, the outlook and future prospects on nanoclay implications and their environmental implementation are elucidated.

Amplifying the dielectric constant of shellac by incorporating natural clays for organic field effect transistors (OFETs)

We demonstrate in this work the practical use of uniform mixtures of a bioresin shellac and four natural clays, i.e. montmorillonite, sepiolite, halloysite and vermiculate as dielectrics in organic field effect transistors (OFETs). We present a thorough characterization of their processability and film forming characteristic, surface characterization, elaborate dielectric investigation and the fabrication of field effect transistors with two classic organic semiconductors, i.e. pentacene and fullerene C60. We show that low operating voltage of approximately 4 V is possible for all the OFETs using several combinations of clays and shellac. The capacitance measurements show an improvement of the dielectric constant of shellac by a factor of 2, to values in excess of 7 in the uniform mixtures of sepiolite and montmorillonite with this bioresin.

Nanoformulations based on collagenases loaded into halloysite/Veegum® clay minerals for potential pharmaceutical applications

The design and development of nanomaterials capable of penetrate cancer cells is fundamental when anticancer therapy is involved. The use of collagenase (Col) is useful since this enzyme can degrade collagen, mainly present in the tumor extracellular matrix. However, its use is often limited since collagenase suffers from inactivation and short half-life. Use of recombinant ultrapure collagenase or carrier systems for their delivery are among the strategies adopted to increase the enzyme stability. Herein, based on the more stability showed by recombinant enzymes and the possibility to use them in anticancer therapy, we propose a novel strategy to further increase their stability by using halloysite nanotubes (HNTs) as carrier. ColG and ColH were supramolecularly loaded onto HNTs and used as fillers for Veegum gels. The systems could be used for potential local administration of collagenases for solid tumor treatment. All techniques adopted for characterization showed that halloysite interacts with collagenases in different ways depending with the Col considered. Furthermore, the hydrogels showed a very slow release of the collagenases within 24 h. Finally, biological assays were performed by studying the digestion of a type-I collagen matrix highlighting that once released the Col still possessed some activity. Thus we developed carrier systems that could further increase the high recombinant collagenases stability, preventing their inactivation in future in vivo applications for potential local tumor treatment.

Alkylated chitosan-attapulgite composite sponge for rapid hemostasis

This study reported the development of a composite sponge (ACATS) based on alkylated chitosan (AC) and attapulgite (AT) for rapid hemostasis. The well-designed ACATS, with an optimal AC N-alkylation of 5.9 % and an optimal AC/AT mass ratio of 3:1, exhibited a hierarchical porous structure with a favorable biocompatibility. The ACATS can effectively and rapidly stop the uncontrolled bleeding in 235 ± 64 s with a total blood loss of 8.4 ± 4.0 g in comparison with those of Celox as a positive control (602 ± 101 s and 22.3 ± 2.4 g, respectively) using rabbit carotid artery injury model in vivo. ACATS could rapidly interact with blood and its components, including platelets (PLs), red blood cells (RBCs), and coagulation factors, resulting in these blood components rapidly accumulation and the following thrombus formation and coagulation factors activation.

Modification of halloysite lumen with dopamine derivatives as filler for antibiofilm coating

HYPOTHESIS

Development of nanocomposite coating with antibiofilm properties is of fundamental importance to efficient fight biofilm formation preventing infections in biomedical area. In this context, halloysite nanotubes (HNTs), biocompatible and low-cost clay mineral, have been efficiently used as filler for different polymeric matrices affording several nanocomposites with appealing antimicrobial properties. The modification of HNTs surfaces represents a valuable strategy to improve the utilization of the clay for biological purposes.

EXPERIMENTS

Herein, the covalent modification of the HNTs lumen with properly designed dopamine derivatives with different perfluoroalkyl chain length is reported. The obtained nanomaterials are thoroughly characterized by several techniques. As proof of concept the antibiofilm properties on E. coli strain of the nanomaterials are assayed as well. Finally, the HNTs fillers were introduced into a polydopamine matrix allowing for the preparation of functional coatings, resistant to formation of microbial biofilms.

FINDINGS

All characterization methods proved the selectivity of the modification and the increased hydrophobicity of the lumen. In particular 27Al solid state nuclear magnetic resonance (NMR) spectra showed a upfield shift of the Al signal. Studies on the antibiofilm properties highlighted different activities according to the length of perfluoroalkyl chains of organic molecules as proved by 19F solid state NMR spectra. The synthetized materials were promising for future application as coatings on medical implants.

Recent Advances in Kaolinite Nanoclay as Drug Carrier for Bioapplications: A Review

Advanced functional two-dimensional (2D) nanomaterials offer unique advantages in drug delivery systems for disease treatment. Kaolinite (Kaol), a nanoclay mineral, is a natural 2D nanomaterial because of its layered silicate structure with nanoscale layer spacing. Recently, Kaol nanoclay is used as a carrier for controlled drug release and improved drug dissolution owing to its advantageous properties such as surface charge, strong biocompatibility, and naturally layered structure, making it an essential development direction for nanoclay-based drug carriers. This review outlines the main physicochemical characteristics of Kaol and the modification methods used for its application in biomedicine. The safety and biocompatibility of Kaol are addressed, and details of the application of Kaol as a drug delivery nanomaterial in antibacterial, anti-inflammatory, and anticancer treatment are discussed. Furthermore, the challenges and prospects of Kaol-based drug delivery nanomaterials in biomedicine are discussed. This review recommends directions for the further development of Kaol nanocarriers by improving their physicochemical properties and expanding the bioapplication range of Kaol.

Exploiting the interaction between halloysite and charged PNAs for their controlled release

The design and development of nanomaterials that could be used in nanomedicine are of fundamental importance to obtain smart nanosystems for the treatment of several diseases. Halloysite, because of its interesting features, represents a suitable nanomaterial for the delivery of different biologically active species. Among them, peptide nucleic acids (PNAs) have attracted considerable attention in recent decades for their potential applications in both molecular antisense diagnosis and as therapeutic agents, although up to now, the actual clinical applications have been very limited. Herein we report a systematic study on the supramolecular interaction of three differently charged PNAs with halloysite. Understanding the interaction mode of charged molecules with the clay surfaces represents a key factor for the future design and development of halloysite based materials which could be used for the delivery and subsequent intracellular release of PNA molecules. Thus, three different PNA tetramers, chosen as models, were synthesized and loaded onto the clay. The obtained nanomaterials were characterized using spectroscopic studies and thermogravimetric analysis, and their morphologies were studied using high angle annular dark field transmission electron microscopy (HAADF/STEM) coupled with Energy Dispersive X-ray spectroscopy (EDX). The aqueous mobility of the three different nanomaterials was investigated by dynamic light scattering (DLS) and ζ-potential measurements. The release of PNA tetramers from the nanomaterials was investigated at two different pH values, mimicking physiological conditions. Finally, to better understand the stability of the synthesized PNAs and their interactions with HNTs, molecular modelling calculations were also performed. The obtained results showed that PNA tetramers interact in different ways with HNT surfaces according to their charge which influences their kinetic release in media mimicking physiological conditions.

Effects of curcumin nanodelivery on schizophrenia and glioblastoma

Curcumin is a natural polyphenol, which has a variety of pharmacological activities, including, antineoplastic, antioxidative and neuroprotective effects. Recent studies provided evidence for the bioactive role of curcumin in the prevention and treatment of various central nervous system (CNS)-related diseases including Parkinson's, Alzheimer's, Schizophrenia disease and glioma neoplasia. Schizophrenia is a disabling psychiatric disorder related with an aberrant functional coupling between hippocampus and prefrontal cortex that might be crucial for cognitive dysfunction. Animal studies have lent support to the hypothesis that curcumin could improve cognitive functioning and enhance cell proliferation of dentate gyrus. In relation to brain tumors, specifically gliomas, the antineoplastic action of curcumin is based on the inhibition of cell growth promoting apoptosis or autophagy and preventing angiogenesis. However, one of the main impediments for the application of curcumin to patients is its low bioavailability. In intracranial lesions, curcumin has problems to cross the blood-brain barrier (BBB). Currently nano-based drug delivery systems are opening a new horizon to tackle this problem. The bioavailability and effective release of curcumin can be made possible in the form of nanocurcumin. This nanoformulation preserves the properties of curcumin and makes it reach tissues with pathology. This review try to study the beneficial effects of the curcumin nanodelivery in central nervous pathologies such us schizophrenia and glioma disease.

Cellulose/pectin-based materials incorporating Laponite-indole derivative hybrid for oral administration and controlled delivery of the neuroprotective drug

Bionanocomposite materials based on clays have been designed for oral administration and controlled release of a neuroprotective drug derivative of 5-methylindole, which had featured an innovative pharmacological mechanism for the treatment of neurodegenerative diseases such as Alzheimer's. This drug was adsorbed in the commercially available Laponite® XLG (Lap). X-ray diffractograms confirmed its intercalation in the interlayer region of the clay. The loaded drug was 62.3 meq/100 g Lap, close to the cation exchange capacity of Lap. Per se toxicity studies and neuroprotective experiments versus the neurotoxin okadaic acid, a potent and selective inhibitor of protein phosphatase 2A (PP2A), confirmed that the clay-intercalated drug did not exert toxicity in cell cultures and provided neuroprotection. Release tests of the hybrid material performed in media mimicking the gastrointestinal tract indicated a drug release in acid medium close to 25 %. The hybrid was encapsulated in a micro/nanocellulose matrix and processed as microbeads, with pectin coating for additional protection, to minimize release under acidic conditions. Alternatively, low density materials based on a microcellulose/pectin matrix were evaluated as orodispersible foams showing fast disintegration times, sufficient mechanical resistance for handling, and release profiles in simulated media that confirmed a controlled release of the encapsulated neuroprotective drug.

Nanoclays for wound management applications

Nanotechnology has been comprehensively applied as a new approach to managing wound healing. Particularly, nanoclays are being used to improve traditional wound healing approaches or new therapies. Nanoclays are nanoscale aluminosilicates with remarkable intrinsic properties, including the capacity to promote hemostatic response, anti-inflammatory effects, angiogenesis, and re-epithelization. The main purpose of the present review is focusing on skin lesions, post-surgical wounds, burn wounds, and chronic ulcer skin wounds that can be treated using nanoclays, not only as vehicles for therapeutic molecules' efficacy improvement but also alone due to their native beneficial features. A systematic search of the PubMed, ScienceDirect, Scopus, Web of Science, and Google Scholar databases revealed several studies satisfying the purpose of our study. In addition, the selected keywords were used to refine the information. Non-planar hydrous phyllosilicates have been compared with other nanoclays considering their acute specific surface area and loading capacity are strongly influenced by their structure. Nanocomposites in the powder form may be directly incorporated in polymers to form gels, biofilms, and scaffolds that may be adjustable to wound sites. Also, nanoclays can be directly incorporated into polymer mats. Regarding hydrogels/films and mats, nanoclays can improve their mechanical strength, thermal stability, viscosity, and cohesive strength. Additionally, nanoclays are able to control drug release, as well as their skin bioavailability, and seem to be promising candidates to overcome cytotoxicity problems; further in vivo toxicity studies are required.

Synthetic beidellite clay as nanocarrier for delivery of antitumor oxindolimine-metal complexes

Studies on the immobilization of oxindolimine‑copper(II) or zinc(II) complexes [ML] in synthetic beidellite (BDL) clay were developed to obtain a suitable inorganic carrier capable of promoting the modified-release of metallopharmaceuticals. Previous investigations have shown that the studied metal complexes are promising antitumor agents, targeting DNA, mitochondria, and some proteins. They can bind to DNA, causing oxidative damage via formation of reactive oxygen species (ROS). In mitochondria they lead to a decrease in membrane potential, acting as decoupling agents, and therefore efficiently inducing apoptosis. Additionally, they inhibit human topoisomerase IB and cyclin dependent kinases, proteins involved in the cell cycle. BDL clays in the sodium form were synthesized under hydrothermal conditions and characterized by a set of physicochemical techniques while the BDL-[ML] hybrid materials were prepared by ion exchange method. The characterization of pristine clay and the obtained hybrids were performed by Infrared, Raman, electron paramagnetic resonance and energy dispersive X-ray spectroscopies, thermogravimetric analysis, scanning electron microscopy, X-ray powder diffraction, specific surface area, zeta potential and surface ionic charge measurements. The [ML] release assays under the same cell incubation conditions were performed monitoring metals by X-ray fluorescence. The BDL-[CuL] hybrid materials were stable and able to derail tumor HeLa cells, with corresponding IC₅₀ values in the 0.11-0.41 mg mL^-1 range. By contrast, the analogous hybrid samples of zinc(II) and the pristine BDL proved to be non-toxic facing the same cells. These results indicate a promising possibility of using synthetic beidellite as a carrier of such antitumor metal complexes.

Clay nanosheets simultaneously intercalated and stabilized by PEGylated chitosan as drug delivery vehicles for cancer chemotherapy

Montmorillonite (MMT) has been frequently utilized as drug vehicles due to its high specific surface area, excellent cation exchange capacity and biocompatibility. However, the significant flocculation of MMT under physiological condition restricted its application to drug delivery. To conquer this problem, the graft-type PEGylated chitosan (PEG-CS) adducts were synthesized as intercalator to stabilize MMT dispersion. Through electrostatic attraction between the chitosan and MMT, the PEG-CS adducts were adsorbed on MMT surfaces and intercalated into MMT. The resulting PEG-CS/MMT nanosheets possessed PEG-rich surfaces, thus showing outstanding dispersion in serum-containing environment. Moreover, the physicochemical characterization revealed that the increased mass ratio of PEG-CS to MMT led to the microstructure transition of PEG-CS/MMT nanosheets from multilayered to exfoliated structure. Interestingly, the PEG-CS/MMT nanosheets with mass ratio of 8.0 in freeze-dried state exhibited a hierarchical lamellar structure organized by the intercalated MMT bundles and unintercalated PEG-CS domains. Notably, the multilayered PEG-CS/MMT nanosheets showed the capability of loading doxorubicin (DOX) superior to the exfoliated counterparts. Importantly, the DOX@PEG-CS/MMT nanosheets endocytosed by TRAMP-C1 cells liberated the drug progressively within acidic organelles, thereby eliciting cell apoptosis. This work provides a new strategy of achieving the controllable dispersion stability of MMT nanoclays towards application potentials in drug delivery.

Nanoclays-containing bio-based packaging materials: properties, applications, safety, and regulatory issues

Food packaging is an important concept for consumer satisfaction and the increased shelf life of food products. The introduction of novel food packaging materials has become an emerging trend in recent years, which could be mainly due to environmental pollution caused by plastic packaging and to reduce food waste. Recently, numerous studies have been carried out on nanoclays or nanolayered silicate to be used in packaging material development as reinforcing filler composites. Different types of nanoclays have been used as food packaging materials, while montmorillonite (MMT), halloysite, bentonite (BT), Cloisite, and organically modified nanoclays have become of great interest. The incorporation of nanoclays into the packaging matrix improves the mechanical and barrier properties and at the same time prolongs the biodegradation of the packaging material. The purpose of this article is to examine the development of nanoclay-based food packaging materials. The review article highlights the current state of research on bio-based polymers with nanoclay for food packaging. In addition, the report analyses the mechanical, barrier, and antibacterial characteristics of nanoclay-based food packaging materials. Finally, it discusses the migration of nanoclays, toxicity levels, and the legislation associated with the application of nanoclays.

Graphical abstract

Hybrid Nanomaterials for Cancer Immunotherapy

Nano-immunotherapy has been recognized as a highly promising strategy for cancer treatment in recent decades, which combines nanotechnology and immunotherapy to combat against tumors. Hybrid nanomaterials consisting of at least two constituents with distinct compositions and properties, usually organic and inorganic, have been engineered with integrated functions and enormous potential in boosting cancer immunotherapy. This review provides a summary of hybrid nanomaterials reported for cancer immunotherapy, including nanoscale metal-organic frameworks, metal-phenolic networks, mesoporous organosilica nanoparticles, metallofullerene nanomaterials, polymer-lipid, and biomacromolecule-based hybrid nanomaterials. The combination of immunotherapy with chemotherapy, chemodynamic therapy, radiotherapy, radiodynamic therapy, photothermal therapy, photodynamic therapy, and sonodynamic therapy based on hybrid nanomaterials is also discussed. Finally, the current challenges and the prospects for designing hybrid nanomaterials and their application in cancer immunotherapy are outlined.

Gold@Halloysite nanotubes-chitin composite hydrogel with antibacterial and hemostatic activity for wound healing

Infection and healing of wounds after injury has always been an unavoidable problem in daily life, so design of a biomaterial with antibacterial and good wound healing properties is highly needed. Herein, a wound healing hydrogel dressing with halloysite clay and chitin as the main components was prepared, which combines the advantages of the biomacromolecule and clay. Halloysite nanotubes (HNTs) are extremely biocompatible clay materials with a hollow tubular structure, and the inner and outer surfaces of HNTs are composed of SiOx and AlOx layers with different charges. Au nanoparticles with diameter in 5–10 nm were filled into the HNTs' lumen to endow photothermal effect of the clay materials. Au@HNTs was then mixed with chitin solution to prepare flexible composite hydrogel by crosslinking by epichlorohydrin. The antibacterial properties, biocompatibility and hemostatic properties of the hydrogel material were investigated by antibacterial experiments, cell experiments, mouse liver and tail hemostatic experiments. After infecting the back wound of mice with Staphylococcus aureus, the hydrogel was applied to the wound to further verify the killing effect on bacteria and wound healing effect of the hydrogel material in vivo. The Au@HNTs-chitin composite hydrogel exhibits high antibacterial and hemostatic activity as well as promoting wound healing function with low cytotoxicity. This study is significant for the development of high-performance wound dressings based on two commonly used biocompatible materials, which shows promising application in wound sterilization and healing.

•

Au particles with diameter of 5–10 nm are filled into the lumen of halloysite.

•

Au@HNTs enhanced the mechanical and anti-bacterial properties of chitin.

•

Au@HNTs-chitin hydrogels exhibit photothermal effect with good compatibility.

•

Hydrogel dressing shows hemostasis and promoting wound healing performance.

Advancements in nanoparticle-based treatment approaches for skin cancer therapy

Skin cancer has emerged as the fifth most commonly reported cancer in the world, causing a burden on global health and the economy. The enormously rising environmental changes, industrialization, and genetic modification have further exacerbated skin cancer statistics. Current treatment modalities such as surgery, radiotherapy, conventional chemotherapy, targeted therapy, and immunotherapy are facing several issues related to cost, toxicity, and bioavailability thereby leading to declined anti-skin cancer therapeutic efficacy and poor patient compliance. In the context of overcoming this limitation, several nanotechnological advancements have been witnessed so far. Among various nanomaterials, nanoparticles have endowed exorbitant advantages by acting as both therapeutic agents and drug carriers for the remarkable treatment of skin cancer. The small size and large surface area to volume ratio of nanoparticles escalate the skin tumor uptake through their leaky vasculature resulting in enhanced therapeutic efficacy. In this context, the present review provides up to date information about different types and pathology of skin cancer, followed by their current treatment modalities and associated drawbacks. Furthermore, it meticulously discusses the role of numerous inorganic, polymer, and lipid-based nanoparticles in skin cancer therapy with subsequent descriptions of their patents and clinical trials.

Inorganic/organic combination: Inorganic particles/polymer composites for tissue engineering applications

Biomaterials have ushered the field of tissue engineering and regeneration into a new era with the development of advanced composites. Among these, the composites of inorganic materials with organic polymers present unique structural and biochemical properties equivalent to naturally occurring hybrid systems such as bones, and thus are highly desired. The last decade has witnessed a steady increase in research on such systems with the focus being on mimicking the peculiar properties of inorganic/organic combination composites in nature. In this review, we discuss the recent progress on the use of inorganic particle/polymer composites for tissue engineering and regenerative medicine. We have elaborated the advantages of inorganic particle/polymer composites over their organic particle-based composite counterparts. As the inorganic particles play a crucial role in defining the features and regenerative capacity of such composites, the review puts a special emphasis on the various types of inorganic particles used in inorganic particle/polymer composites. The inorganic particles that are covered in this review are categorised into two broad types (1) solid (e.g., calcium phosphate, hydroxyapatite, etc.) and (2) porous particles (e.g., mesoporous silica, porous silicon etc.), which are elaborated in detail with recent examples. The review also covers other new types of inorganic material (e.g., 2D inorganic materials, clays, etc.) based polymer composites for tissue engineering applications. Lastly, we provide our expert analysis and opinion of the field focusing on the limitations of the currently used inorganic/organic combination composites and the immense potential of new generation of composites that are in development.

Impact of Increased Sonication-Induced Dispersion of Sepiolite on Its Interaction with Biological Macromolecules and Toxicity/Proliferation in Human Cells

Sepiolite is a natural clay silicate that is widely used, including biomedical applications; notably sepiolite shows promising features for the transfer of biological macromolecules into mammalian cells. However, before its use, such an approach should address the efficiency of binding to biological macromolecules and cell toxicity. Because sepiolite spontaneously forms aggregates, its disaggregation can represent an important challenge for improving the suspension performance and the assembly with biological species. However, this can also influence the toxicity of sepiolite in mammalian cells. Here, a very pure commercial sepiolite (Pangel S9), which is present as a partially defibrillated clay mineral, is used to study the consequences of additional deagglomeration/dispersion through sonication. We analyzed the impact of extra sonication on the dispersion of sepiolite aggregates. Factors such as sonication time, sonicator power, and temperature are taken into account. With increasing sonication time, a decrease in aggregation is observed, as well as a decrease in the length of the nanofibers monitored by atomic force microscopy. Changes in the temperature and pH of the solution are also observed during the sonication process. Moreover, although the adsorption capacity of bovine serum albumin (BSA) protein on sepiolite is increased with sonication time, the DNA adsorption efficiency remains unaffected. Finally, sonication of sepiolite decreases the hemolytic activity in blood cells and the toxicity in two different human cell lines. These data show that extra sonication of deagglomerated sepiolite can further favor its interaction with some biomacromolecules (e.g., BSA), and, in parallel, decrease sepiolite toxicity in mammalian cells. Therefore, sonication represents an alluring procedure for future biomedical applications of sepiolite, even when using commercial defibrillated particles.

Functionally modified halloysite nanotubes for personalized bioapplications

Halloysite nanotubes (HNTs) are naturally aluminosilicate clay minerals that have the benefits of large surface areas, high mechanical properties, easy functionalization, and high biocompatibility, HNTs have been developed as multifunctional nanoplatforms for various bioapplications. Although some reviews have summarized the properties and bioapplications of HNTs, it remains unclear how to functionalize the modifications of HNTs for their personalized bioapplications. In this review, based on the physicochemical properties of HNTs, we summarized the methods of functionalized modifications (surface modification and structure modification) on HNTs. Also, we highlighted their personalized bioapplications (anti-bacterial, anti-inflammatory, wound healing, cancer theranostics, bone regenerative, and biosensing) by stressing on the main roles of HNTs. Finally, we provide perspectives on the future of functionalized modifications of HNTs for docking specific biological applications.

Organoselenium compounds as functionalizing agents for gold nanoparticles in cancer therapy

Gold nanoparticles (AuNPs) modified with four organoselenium compounds, i.e., 4-selenocyanatoaniline (compound 1), 4,4'-diselanediyldianiline (compound 2), N-(4-selenocyanatophenyl)cinnamamide (compound 3), and N-(3-selenocyanatopropyl)cinnamamide (compound 4), were synthesized following two different approaches: direct conjugation and non-covalent immobilization onto hydrophilic and non-cytotoxic AuNPs functionalized with 3-mercapto-1-propanesulfonate (3MPS). Both free compounds and AuNPs-based systems were characterized via UV-Vis, FTIR NMR, mass spectrometry, and SR-XPS to assess their optical and structural properties. Size and colloidal stability were evaluated by DLS and ζ-potential measurements, whereas morphology at solid-state was evaluated by atomic force (AFM) and scanning electron (FESEM) microscopies. AuNPs synthesized through chemical reduction method in presence of Se-based compounds as functionalizing agents allowed the formation of aggregated NPs with little to no solubility in aqueous media. To improve their hydrophilicity and stability mixed AuNPs-3MPS-1 were synthesized. Besides, Se-loaded AuNPs-3MPS revealed to be the most suitable systems for biological studies in terms of size and colloidal stability. Selenium derivatives and AuNPs were tested in vitro via MTT assay against PC-3 (prostatic adenocarcinoma) and HCT-116 (colorectal carcinoma) cell lines. Compared to free compounds, direct functionalization onto AuNPs with formation of Au-Se covalent bond led to non-cytotoxic systems in the concentration range explored (0-100 μg/mL), whereas immobilization on AuNPs-3MPS improved the cytotoxicity of compounds 1, 3, and 4. Selective anticancer response against HCT-116 cells was obtained by AuNPs-3MPS-1. These results demonstrated that AuNPs can be used as a platform to tune the in vitro biological activity of organoselenium compounds.

Synergies in antimicrobial treatment by a levofloxacin-loaded halloysite and gold nanoparticles with a conjugation to a cell-penetrating peptide

Herein, a novel designed antimicrobial therapeutic drug delivery system is presented, in which halloysite nanotubes (HNTs) encapsulate a determined dosage of levofloxacin (lvx). Moreover, gold nanoparticles (AuNPs) have been embedded into the structure for plasmonic heating under irradiation of the green LED light (7 W, 526 nm). It was revealed that the plasmonic heating of the AuNPs leads to a controlled trend in the lvx release process. Also, a synergistic effect on the antimicrobial activity of the prepared therapeutic system has been observed through photothermal heating of the structure. To enhance the cell adhesion, a cell-penetrating peptide sequence (CPP) is conjugated to the surfaces. This CPP has led to quick co-localization of the prepared nano-cargo (denoted as lvx@HNT/Au-CPP) with the bacterial living cells and further attachment (confirmed by confocal microscopy). Concisely, the structure of the designed nano-cargo has been investigated by various methods, and the in vitro cellular experiments (zone of inhibition and colony-counting) have disclosed that the antimicrobial activity of the lvx is significantly enhanced through incorporation into the HNT/Au-CPP delivery system (drug content: 16 wt%), in comparison with the individual lvx with the same dosage. Hence, it can be stated that the bacterial resistance against antibiotics and the toxic effects of the chemical medications are reduced through the application of the presented strategy.

In Vitro Binding and Release Mechanisms of Doxorubicin from Nanoclays

Nanoclays have been developed as drug delivery systems, but their mechanisms of DOX delivery are unclear. Herein, unmodified nanoclays (halloysite, kaolinite, montmorillonite) were comprehensively studied on their in vitro binding and release mechanisms of DOX from both experimental and theoretical aspects. These nanoclays with high loading capacity (>50%) and encapsulation efficiency capacity (>90%) of DOX are attributed to the exposed hydroxyl groups and the Lewis base sites on the surfaces. Density functional theory calculations also confirmed that DOX is preferentially adsorbed on the Al-OH surfaces while adsorption on Si-O surfaces is limited. Besides this, the pH-responsive profiles of DOX release from nanoclays are related to the protonation of negatively charged nanoclays in weakly acidic solutions that makes it easier to dissociate with positively charged DOX. The in-depth mechanistic method in this work is widely applicable and demonstrates that nanoclays can be used as efficient nanocarriers for more biomedical applications.

Recent Advances in Prodigiosin as a Bioactive Compound in Nanocomposite Applications

Bionanocomposites based on natural bioactive entities have gained importance due to their abundance; renewable and environmentally benign nature; and outstanding properties with applied perspective. Additionally, their formulation with biological molecules with antimicrobial, antioxidant, and anticancer activities has been produced nowadays. The present review details the state of the art and the importance of this pyrrolic compound produced by microorganisms, with interest towards Serratia marcescens, including production strategies at a laboratory level and scale-up to bioreactors. Promising results of its biological activity have been reported to date, and the advances and applications in bionanocomposites are the most recent strategy to potentiate and to obtain new carriers for the transport and controlled release of prodigiosin. Prodigiosin, a bioactive secondary metabolite, produced by Serratia marcescens, is an effective proapoptotic agent against bacterial and fungal strains as well as cancer cell lines. Furthermore, this molecule presents antioxidant activity, which makes it ideal for treating wounds and promoting the general improvement of the immune system. Likewise, some of the characteristics of prodigiosin, such as hydrophobicity, limit its use for medical and biotechnological applications; however, this can be overcome by using it as a component of a bionanocomposite. This review focuses on the chemistry and the structure of the bionanocomposites currently developed using biorenewable resources. Moreover, the work illuminates recent developments in pyrrole-based bionanocomposites, with special insight to its application in the medical area.

Nanomaterials in hair care and treatment

Hair care and treatment has evolved significantly through the years as new formulations are continuously being explored in an attempt to meet the demand in cosmetic and medicinal fields. While standard hair care procedures include hair washing, aimed at hair cleansing and maintenance, as well as hair dyeing and bleaching formulations for hair embellishment, modern hair treatments are mainly focused on circumventing hair loss conditions, strengthening hair follicle properties and treat hair infestations. In this regard, active compounds (ACs) included in hair cosmetic formulations include a vast array of hair cleansing and hair dye molecules, and typical hair treatments include anti-hair loss ACs (e.g. minoxidil and finasteride) and anti-lice ACs (e.g. permethrin). However, several challenges still persist, as conventional AC formulations exhibit sub-optimal performance and some may present toxicity issues, calling for an improved design of formulations regarding both efficacy and safety. More recently, nano-based strategies encompassing nanomaterials have emerged as promising tailored approaches to improve the performance of ACs incorporated into hair cosmetics and treatment formulations. The interest in using these nanomaterials is based on account of their ability to: (1) increase stability, safety and biocompatibility of ACs; (2) maximize hair affinity, contact and retention, acting as versatile biointerfaces; (3) enable the controlled release of ACs in both hair and scalp, serving as prolonged AC reservoirs; besides offering (4) hair follicle targeting features attending to the possibility of surface tunability. This review covers the breakthrough of nanomaterials for hair cosmetics and hair treatment, focusing on organic nanomaterials (polymer-based and lipid-based nanoparticles) and inorganic nanomaterials (nanosheets, nanotubes and inorganic nanoparticles), as well as their applications, highlighting their potential as innovative multifunctional nanomaterials towards maximized hair care and treatment. STATEMENT OF SIGNIFICANCE: This manuscript is focused on reviewing the nanotechnological strategies investigated for hair care and treatment so far. While conventional formulations exhibit sub-optimal performance and some may present toxicity issues, the selection of improved and suitable nanodelivery systems is of utmost relevance to ensure a proper active ingredient release in both hair and scalp, maximize hair affinity, contact and retention, and provide hair follicle targeting features, warranting stability, efficacy and safety. This innovative manuscript highlights the advantages of nanotechnology-based approaches, particularly as tunable and versatile biointerfaces, and their applications as innovative multifunctional nanomaterials towards maximized hair care and treatment.

A Comprehensive Study on the Applications of Clays into Advanced Technologies, with a Particular Attention on Biomedicine and Environmental Remediation

In recent years, a great interest has arisen around the integration of naturally occurring clays into a plethora of advanced technological applications, quite far from the typical fabrication of traditional ceramics. This “second (technological) life” of clays into fields of emerging interest is mainly due to clays’ peculiar properties, in particular their ability to exchange (capture) ions, their layered structure, surface area and reactivity, and their biocompatibility. Since the maximization of clay performances/exploitations passes through the comprehension of the mechanisms involved, this review aims at providing a useful text that analyzes the main goals reached by clays in different fields coupled with the analysis of the structure-property correlations. After providing an introduction mainly focused on the economic analysis of clays global trading, clays are classified basing on their structural/chemical composition. The main relevant physicochemical properties are discussed (particular attention has been dedicated to the influence of interlayer composition on clay properties). Lastly, a deep analysis of the main relevant nonconventional applications of clays is presented. Several case studies describing the use of clays in biomedicine, environmental remediation, membrane technology, additive manufacturing, and sol-gel processes are presented, and results critically discussed.

Prodrug based on halloysite delivery systems to improve the antitumor ability of methotrexate in leukemia cell lines

The prodrug approach, as well as the development of specific systems able to deliver a chemotherapeutic agent in the target site, decreasing the side effects often associated with its administration, are still a challenging. In this context, both methotrexate drug molecules (MTX) and biotin ligand moieties, whose receptors are overexpressed on the surface of several cancer cells, were loaded on halloysite nanotubes (HNTs) to develop nanomaterial based on multifunctional and "smart" delivery systems. To highlight the crucial role played by biotin, carrier systems based on HNTs and MTX were also synthetized. In detail, several approaches were envisaged: i) a supramolecular interaction between the clay and the drug; ii) a covalent grafting of the drug onto the HNTs external surface and, iii) a combination of both approaches. The nanomaterials obtained were characterized by thermogravimetric analysis, FT-IR, and UV-vis spectroscopies, DLS and ζ-potential measurements and the morphologies were imaged by HAADF/STEM investigations. Kinetic release experiments at different pH conditions were also performed. Finally, as a proof-of-concept application of our pro-drug delivery systems based on HNTs in cancer therapy, the cytotoxic effects were evaluated on acute myeloid leukemia cell lines, HL60 and its multidrug resistance variant, HL60R. The obtained results showed that both the MTX prodrug system and the biotinylated ones played a crucial role in the biological activity and, they are promising agents for the cancer treatments.

Nano- and microparticle-stabilized Pickering emulsions designed for topical therapeutics and cosmetic applications

Pickering emulsions are systems composed of two immiscible fluids, which are stabilized by solid organic or inorganic particles. These solid particles include a broad range of particles that can be used to stabilize Pickering emulsions. An improved resistance against coalescence and lower toxicity, against conventional emulsions stabilized by surfactants, make Pickering emulsions suitable candidates for numerous applications, such as catalysis, food, oil recovery, cosmetics, and pharmaceutical industries. In this article, we give an overview of Pickering emulsions focusing on topical applications. First, we reference the parameters that influence the stabilization of Pickering emulsions. Second, we discuss some of the already investigated topical applications of nano- and microparticles used to stabilize Pickering emulsions. Afterwards, we consider some of the most promising stabilizers of Pickering emulsions for topical applications. Ultimately, we carried out a brief analysis of toxicity and advances in future perspectives, highlighting the promising use of these emulsions in cosmetics and dermopharmaceutical formulations.

There is still plenty of room for layer-by-layer assembly for constructing nanoarchitectonics-based materials and devices

Nanoarchitectonics approaches can produce functional materials from tiny units through combination of various processes including atom/molecular manipulation, chemical conversion, self-assembly/self-organization, microfabrication, and bio-inspired procedures. Existing fabrication approaches can be regarded as fitting into the same concept. In particular, the so-called layer-by-layer (LbL) assembly method has huge potential for preparing applicable materials with a great variety of assembling mechanisms. LbL assembly is a multistep process where different components can be organized in planned sequences while simple alignment options provide access to superstructures, for example helical structures, and anisotropies which are important aspects of nanoarchitectonics. In this article, newly-featured examples are extracted from the literature on LbL assembly discussing trends for composite functional materials according to (i) principles and techniques, (ii) composite materials, and (iii) applications. We present our opinion on the present trends, and the prospects of LbL assembly. While this method has already reached a certain maturity, there is still plenty of room for expanding its usefulness for the fabrication of nanoarchitectonics-based materials and devices.