PBA composites and their derivatives in energy and environmental applications

Berlin Green with tunable iron content as ultra-high rate host for efficient aqueous ammonium ion storage

Prussian blue analogues (PBAs) are regarded as promising cathode materials for ammonium-ion batteries (AIBs) because of their low cost and superb theoretical capacity. However, its inherently poor conductivity and structural collapse can significantly limit the enhancement of rate property and cycling stability. In this work, Berlin Green (BG) electrode materials with similar wool-like clusters were constructed by direct precipitation method to accelerate the kinetic, which realizes outstanding cycling stability. Berlin Green with the appropriate amount of iron (BG-2) has a fast ion transport channel, enhanced structure stability, highly reversible insertion/extraction of NH4+, and fine electrochemical reaction activity. Benefiting from the unique architecture and component, the BG-2 electrode shows an excellent rate performance with a discharge/charge specific capacity of 60.1/59.3 mAh g-1 at 5 A g-1. Even at 5 A g-1, BG-2 exhibits remarkable cycling stability with an initial discharge capacity of 59.5 mAh g-1 and a capacity retention rate of approximately 76% after 30,000 cycles. The BG-2 reveals exceedingly good electrochemical reversibility during the process of NH4+ (de)insertion. BG materials indicate huge potential as a cathode material for the next generation of high-performance aqueous batteries.

Nickel-doped red mud-based Prussian blue analogues heterogeneous activation of H2O2 for ciprofloxacin degradation: waste control by waste

Red mud (RM) is a typical bulk solid waste with Fe/Al/Si/Ca-rich characteristics that has been used to prepare various heterogeneous catalysts such as iron-based catalysts and supported catalysts. Prussian blue analogues (PBA) is a low-cost, environmentally friendly, and active site rich iron-based metal organic framework, but its catalytic properties are adversely affected by their easy aggregation. In this study, nickel-doped RM-based PBA (RM-Ni PBA) was synthesized by acid dissolution-coprecipitation method for the degradation of ciprofloxacin (CIP). The characterization showed that RM-Ni PBA was a material with excellent dispersibility, large specific surface area, and abundant active sites. The degradation results showed that the removal efficiency of CIP in the RM-Ni PBA/H2O2 system was 16.63, 1.78, and 1.81 times that of RM, RM-PB, and Ni PBA, respectively. It was found that 1O2 was the main reactive oxygen species (ROS) dominated the degradation process, and its formation was accompanied by the mutual conversion of Ni(II)/Fe(II) and Ni(III)/Fe(III). Notably, the degradation process maintained a satisfactory efficiency over a wide pH range (3-9) and exhibited strong anti-interference ability against impurities such as Cl-, SO42-, and NO3-. The components and contents of RM-Ni PBA remained relatively stable during the degradation process. In addition, the degradation intermediates of CIP were identified, and possible degradation pathways were proposed. This study is expected to provide theoretical basis and technical guidance for the application of RM-based heterogeneous catalyst in the treatment of antibiotic wastewater.

Prussian Blue Analogues for Sodium-Ion Battery Cathodes: A Review of Mechanistic Insights, Current Challenges, and Future Pathways

Prussian blue analogues (PBAs) have emerged as highly promising cathode materials for sodium-ion batteries (SIBs) due to their affordability, facile synthesis, porous framework, and high theoretical capacity. Despite their considerable potential, practical applications of PBAs face significant challenges that limit their performance. This review offers a comprehensive retrospective analysis of PBAs' development history as cathode materials, delving into their reaction mechanisms, including charge compensation and ion diffusion mechanisms. Furthermore, to overcome these challenges, a range of improvement strategies are proposed, encompassing modifications in synthesis techniques and enhancements in structural stability. Finally, the commercial viability of PBAs is examined, alongside discussions on advanced synthesis methods and existing concerns regarding cost and safety, aiming to foster ongoing advancements of PBAs for practical SIBs.

A novel hollow CuMn-PBA@NiCo-LDH nanobox for efficient detection of glucose in food

Designing a rapid and sensitive glucose detection method is of great significance to public health. Herein, hollow CuMn-PBA@NiCo-LDH nanoboxes (CuMn-PBA@NiCo-LDH NBs) were prepared using acid etching, cation exchange, and reflux method. The modified electrode exhibited outstanding electrocatalytic performance for glucose oxidation due to the unique hollow nanostructure and synergistic effects. The CuMn-PBA@NiCo-LDH NBs electrode displayed excellent electrocatalytic oxidation activity for glucose in an alkaline solution. Under optimal conditions, the electrode achieved a wide linear range (0.0005-1 mmol L-1, and 1-7 mmol L-1) and high sensitivity (10,300 μA L/mmol cm-2 and 5310 μA L/mmol cm-2), with a limit of detection (LOD) of 19 nmol L-1. The feasibility of the sensor applied to the detection of glucose was verified in real food samples through spiked recovery experiments. This electrode material offers an alternative method for the non-enzymatic glucose sensors.

In Situ Exfoliation Growth Strategy Realizing Controlled Synthesis of 3D to 2D MOF Materials as High-Performance Electrochemical Biosensors

Two-dimensional (2D) metal-organic framework (MOF) nanosheets with large surface area, ultrathin thickness, and highly accessible active sites have attracted great research attention. Developing efficient approaches to realize the controllable synthesis of well-defined 2D MOFs with a specific composition and morphology is critical. However, it is still a significant challenge to construct thin and uniform 2D MOF nanosheets and resolve the reagglomeration as well as poor stability of target 2D MOF products. Here, an "in situ exfoliation growth" strategy is proposed, where a one-step synthetic process can realize the successful fabrication of PBA/MIL-53(NiFe)/NF nanosheets on the surface of nickel foam (NF) via in situ conversion and exfoliation growth strategies. The PBA/MIL-53(NiFe)/NF nanosheets combine the individual advantages of MOFs, Prussian blue analogues (PBAs), and 2D materials. As expected, the resulting PBA/MIL-53(NiFe)/NF as a glucose electrode exhibits an extremely high sensitivity of 25.74 mA mM-1 cm-2 in a very wide concentration range of 180 nM to 4.8 μM. The present exciting work provides a simple and effective strategy for the construction of high-performance nonenzymatic glucose electrochemical biosensors.

Boosting Zinc Storage Performance of Li3 VO4 Cathode Material for Aqueous Zinc Ion Batteries via Carbon-Incorporation: A Study Combining Theory and Experiment

In the search for sustainable cathode materials for aqueous zinc ion batteries (AZIBs), vanadium (V)-based materials have garnered interest, primarily due to their abundance and multiple oxidation states. Among the contenders, Li3 VO4 (LiVO) stands out for its affordability, high specific capacity, and elevated ionic conductivity. However, its limited electrical conductivity results in significant resistance polarization, limiting its rate capability, especially under high currents. Through density functional theory (DFT) calculations, this study evaluates the electrochemical implications of carbon (C) incorporation within the LiVO matrix. The findings indicate that C integration significantly ameliorates the conductivity of LiVO. Moreover, C serves as a barrier, mitigating direct interactions between Zn2+ and LiVO, which in turn expedites Zn2+ diffusion. When considering various C materials for this role, glucose is emerged as the optimal candidate. The LiVO/C-glucose composite (LiVO/C-G) is observed to undergo dual phase transitions during charge-discharge cycles, resulting in an amorphous vanadium-oxygen (VO) derivative, paving the way for subsequent electrochemical reactions. Collectively, the insights pave a promising avenue for refining AZIB cathode design and performance.

Elaborating the Crystal Water of Prussian Blue for Outstanding Performance of Sodium Ion Batteries

Prussian blue (PB) is one of the main cathode materials with industrial prospects for the sodium ion battery. The structural stability of PB materials is directly associated with the presence of crystal water within the open 3D framework. However, there remains a lack of consensus regarding whether all forms of crystal water have detrimental effects on the structural stability of the PB materials. Currently, it is widely accepted that interstitial water is the stability troublemaker, whereas the role of coordination water remains elusive. In this work, the dynamic evolution of PB structures is investigated during the crystal water (in all forms) removal process through a variety of online monitoring techniques. It can be inferred that the PB-130 °C retains trace coordination water (1.3%) and original structural integrity, whereas PB-180 °C eliminates almost all of crystal water (∼12.1%, including both interstitial and coordinated water), but inevitably suffers from structural collapse. This is mainly because the coordinated water within the PB material plays a crucial role in maintaining structural stability via forming the -N≡C-FeLS-C≡N- conjugate bridge. Consequently, PB-130 °C with trace coordination water delivers superior reversible capacity (113.6 mAh g-1), high rate capability (charge to >80% capacity in 3 min), and long cycling stability (only 0.012% fading per cycle), demonstrating its promising prospect in practical applications.

Studies on Composite Solid Electrolytes with a Dual Selective Confinement Interface Structure of Anions for High-Performance Lithium Metal Batteries

Solid-state lithium batteries (SSLBs) have attracted much attention due to their good thermal stability and high energy density. However, solid-state electrolytes with low conductivity and prominent interfacial issues have hindered the further development of SSLBs. In this research, inspired from a selective confinement structure of anions, a novel HMOF-DNSE composite solid electrolyte with a dual selective confinement interface structure is proposed based on the semi-interpenetrating structure generated by poly(vinylidene fluoride)-hexafluoropropylene (PVDF-HFP), poly(di-n-butylmethylammonium) bis(trifluoromethanesulfonyl)imide (PDADMATFSI), and a metal-organic frameworks MOF derivative (HMOF) as a filler. The dual-network structure of PVDF-HFP/PDADMATFSI combined with HMOF formed a dual selective confinement interface structure to confine out the movement of large anions TFSI-, thereby enhancing the transfer ability of Li+. Subsequently, the addition of HMOF further improves the transfer of Li+ by binding up TFSI- through its crystal structure. The results show that HMOF-DNSE possesses a high room-temperature ionic conductivity (0.7 mS cm-1), a wide electrochemical window (up to 4.5 V), and a high Li+ transfer number (tLi+) (0.56). LiFePO4/HMOF-DNSE/Li cell shows an excellent capacity of 141.5 mAh g-1 at 1C rate under room temperature, with a high retention of 80.1% after 500 cycles. The material design strategy, which is based on selective confinement interface structures of anions, offers valuable insights into enhancing the electrochemical performance of solid-state lithium batteries.

Degradation of norfloxacin by red mud-based prussian blue activating H2O2: A strategy for treating waste with waste

The massive accumulation of red mud (RM) and the abuse of antibiotics pose a threat to environment safety and human health. In this study, we synthesized RM-based Prussian blue (RM-PB) by acid solution-coprecipitation method to activate H2O2 to degrade norfloxacin, which reached about 90% degradation efficiency at pH 5 within 60 min and maintained excellent catalytic performance over a wide pH range (3-11). Due to better dispersion and unique pore properties, RM-PB exposed more active sites, thus the RM-PB/H2O2 system produced more reactive oxygen species. As a result, the removal rate of norfloxacin by RM-PB/H2O2 system was 8.58 times and 2.62 times of that by RM/H2O2 system and PB/H2O2 system, respectively. The reactive oxygen species (ROS) produced in the degradation process included ·OH, ·O2- and 1O2, with 1O2 playing a dominant role. The formation and transformation of these ROS was accompanied by the Fe(III)/Fe(II) cycle, which was conducive for the sustained production of ROS. The RM-PB/H2O2 system maintained a higher degradation efficiency after five cycles, and the material exhibited strong stability, with a low iron leaching concentration. Further research showed the degradation process was less affected by Cl-, SO42-, NO3-, and humic acids, but was inhibited by HCO3- and HPO42-. In addition, we also proposed the possible degradation pathway of norfloxacin. This work is expected to improve the resource utilization rate of RM and achieve treating waste with waste.

Synthesis of unique three-dimensional CoMn2O4@Ni(OH)2 nanocages via Kirkendall effect for non-enzymatic glucose sensing

Transition metal oxides / hydroxides, which have the advantages of wide distribution, low price, low toxicity, and stable chemical properties, have attracted much attention from researchers. Therefore, this work reports the construction of the unique CoMn2O4 nanocages assisted by the Kirkendall effect, and worm-like Ni(OH)2 nanoparticles were grown on the surface via hydrothermal method, the final product CoMn2O4@Ni(OH)2 nanocages were applied to construct efficient and sensitive non-enzymatic glucose electrochemical sensing. The stable three-dimensional hollow CoMn2O4 nanocages structure, not only can provide a wider specific surface area and more abundant active sites, its porous structure also can effectively inhibit the aggregation of nanoparticles, increase the ion diffusion path, shorten the electron transport distance, and improve the electrical conductivity. Loading Ni(OH)2 nanoparticles on the CoMn2O4 nanocages can increase catalytic sites, and further strengthen the electrocatalytic performance. Due to the good synergistic effect between CoMn2O4 and Ni(OH)2, CoMn2O4@Ni(OH)2 nanocages electrochemical sensor can achieve sensitive and rapid detection of trace glucose, with excellent linear range (8.5-1830.5 μM), low limit of detection (0.264 μM), high sensitivity of 0.00646 μA mM-1 cm-2, and outstanding repeatability. More importantly, the sensor has been successfully applied to the determination of blood glucose in human serum with good recoveries (95.64-104.3 %). This work provides a novel scheme for blood glucose detection and expands the application of transition metal oxides / hydroxides in the field of electrochemical sensing.

Recent Progress in 2D Metal-Organic Framework-Related Materials

2D metal-organic frameworks-based (2D MOF-related) materials benefit from variable topological structures, plentiful open active sites, and high specific surface areas, demonstrating promising applications in gas storage, adsorption and separation, energy conversion, and other domains. In recent years, researchers have innovatively designed multiple strategies to avoid the adverse effects of conventional methods on the synthesis of high-quality 2D MOFs. This review focuses on the latest advances in creative synthesis techniques for 2D MOF-related materials from both the top-down and bottom-up perspectives. Subsequently, the strategies are categorized and summarized for synthesizing 2D MOF-related composites and their derivatives. Finally, the current challenges are highlighted faced by 2D MOF-related materials and some targeted recommendations are put forward to inspire researchers to investigate more effective synthesis methods.

High-Voltage Potassium Hexacyanoferrate Cathode via High-Entropy and Potassium Incorporation for Stable Sodium-Ion Batteries

Prussian blue analogues (PBAs) used as sodium ion battery (SIB) cathodes are usually the focus of attention due to their three-dimensional open frame and high theoretical capacity. Nonetheless, the disadvantages of a low working voltage and inferior structural stability of PBAs prevent their further applications. Herein, we propose constructing the Kx(MnFeCoNiCu)[Fe(CN)6] (HE-K-PBA) cathode by high-entropy and potassium incorporation strategy to simultaneously realize high working voltage and cycling stability. The reaction mechanism of metal cations in HE-K-PBA are revealed by synchrotron radiation X-ray absorption spectroscopy (XAS), ex situ X-ray photoelectron spectroscopy (XPS), and in situ Raman spectra. We also investigate the entropy stabilization mechanism via finite element simulation, demonstrating that HE-K-PBA with small von Mises stress and weak structure strain can significantly mitigate the structural distortion. Benefit from the stable structure and everlasting K+ (de)intercalation, the HE-K-PBA delivers high output voltage (3.46 V), good reversible capacity (120.5 mAh g-1 at 0.01 A g-1), and capacity retention of 90.4% after 1700 cycles at 1.0 A g-1. Moreover, the assembled full cell and all-solid-state batteries with a stable median voltage of 3.29 V over 3000 cycles further demonstrate the application prospects of the HE-K-PBA cathode.

Application of Conductive MOF in Zinc-Based Batteries

The use of conductive MOFs (c-MOFs) in zinc-based batteries has been a popular research direction. Zinc-based batteries are widely used with the advantages of high specific capacity and safety and stability, but they also face many problems. c-MOFs have excellent conductivity compared with other primitive MOFs, and therefore have better applications in zinc-based batteries. In this paper, the transfer mechanisms of the unique charges of c-MOFs: hop transport and band transport, respectively, are discussed and the way of electron transport is further addressed. Then, the various ways to prepare c-MOFs are introduced, among which solvothermal, interfacial synthesis, and postprocessing methods are widely used. In addition, the applications of c-MOFs are discussed in terms of their role and performance in different types of zinc-based batteries. Finally, the current problems of c-MOFs and the prospects for their future development are presented.

Ferricyanide Armed Anodes Enable Stable Water Oxidation in Saturated Saline Water at 2 A/cm2

The direct seawater electrolysis at high current density and low overpotential affords an effective strategy toward clean and renewable hydrogen fuel production. However, the severe corrosion of anode as a result of the saturation of Cl- upon continuous seawater feeding seriously hamper the electrolytic process. Herein, cobalt ferricyanide / cobalt phosphide (CoFePBA/Co2 P) anodes with Cap/Pin structure are synthesized, which stably catalyze alkaline saturated saline water oxidation at 200-2000 mA cm-2 over hundreds of hours without corrosion. Together with the experimental findings, the molecular dynamics simulations reveal that PO4 3- and Fe(CN)6 3- generated by the electrode play synergistic role in repelling Cl- via electrostatic repulsion and dense coverage, which reduced Cl- adsorption by nearly 5-fold. The novel anionic synergy endow superior corrosion protection for the electrode, and is expected to promote the practical application of saline water electrolysis.

Plasma-Induced Oxygen Vacancies in N-Doped Hollow NiCoPBA Nanocages Derived from Prussian Blue Analogue for Efficient OER in Alkaline Media

Although water splitting is a promising method to produce clean hydrogen energy, it requires efficient and low-cost catalysts for the oxygen evolution reaction (OER). This study focused on plasma treatment's significance of surface oxygen vacancies in improving OER electrocatalytic activity. For this, we directly grew hollow NiCoPBA nanocages using a Prussian blue analogue (PBA) on nickel foam (NF). The material was treated with N plasma, followed by a thermal reduction process for inducing oxygen vacancies and N doping on the structure of NiCoPBA. These oxygen defects were found to play an essential role as a catalyst center for the OER in enhancing the charge transfer efficiency of NiCoPBA. The N-doped hollow NiCoPBA/NF showed excellent OER performance in an alkaline medium, with a low overpotential of 289 mV at 10 mA cm^-2 and a high stability for 24 h. The catalyst also outperformed a commercial RuO₂ (350 mV). We believe that using plasma-induced oxygen vacancies with simultaneous N doping will provide a novel insight into the design of low-priced NiCoPBA electrocatalysts.

Direct Synthesis of Mn3[Fe(CN)6]2·nH2O Nanosheets as Novel 2D Analog of Prussian Blue and Material for High-Performance Metal-Ion Batteries

Rechargeable metal-ion batteries (RMIBs) are prospective highly effective and low-cost devices for energy storage. Prussian blue analogues (PBAs) have become a subject of significant interest for commercial applications owing to their exceptional specific capacity and broad operational potential window as cathode materials for rechargeable metal-ion batteries. However, the limiting factors for its widespread use are its poor electrical conductivity and stability. The present study describes the direct and simple synthesis of 2D nanosheets of MnFCN (Mn₃[Fe(CN)₆]₂·nH₂O) on nickel foam (NF) via a successive ionic layer deposition (SILD) method, which provided more ion diffusion and electrochemical conductivity. MnFCN/NF exhibited exceptional cathode performance for RMIBs, delivering a high specific capacity of 1032 F/g at 1 A/g in an aqueous 1M NaOH electrolyte. Additionally, the specific capacitance reached the remarkable levels of 327.5 F/g at 1 A/g and 230 F/g at 0.1 A/g in 1M Na₂SO₄ and 1M ZnSO₄ aqueous solutions, respectively.

MOFs Containing Solid-State Electrolytes for Batteries

The use of metal-organic frameworks (MOFs) in solid-state electrolytes (SSEs) has been a very attractive research area that has received widespread attention in the modern world. SSEs can be divided into different types, some of which can be combined with MOFs to improve the electrochemical performance of the batteries by taking advantage of the high surface area and high porosity of MOFs. However, it also faces many serious problems and challenges. In this review, different types of SSEs are classified and the changes in these electrolytes after the addition of MOFs are described. Afterward, these SSEs with MOFs attached are introduced for different types of battery applications and the effects of these SSEs combined with MOFs on the electrochemical performance of the cells are described. Finally, some challenges faced by MOFs materials in batteries applications are presented, then some solutions to the problems and development expectations of MOFs are given.

How About Vanadium-Based Compounds as Cathode Materials for Aqueous Zinc Ion Batteries?

Aqueous zinc-ion batteries (AZIBs) stand out among many monovalent/multivalent metal-ion batteries as promising new energy storage devices because of their good safety, low cost, and environmental friendliness. Nevertheless, there are still many great challenges to exploring new-type cathode materials that are suitable for Zn²⁺ intercalation. Vanadium-based compounds with various structures, large layer spacing, and different oxidation states are considered suitable cathode candidates for AZIBs. Herein, the research advances in vanadium-based compounds in recent years are systematically reviewed. The preparation methods, crystal structures, electrochemical performances, and energy storage mechanisms of vanadium-based compounds (e.g., vanadium phosphates, vanadium oxides, vanadates, vanadium sulfides, and vanadium nitrides) are mainly introduced. Finally, the limitations and development prospects of vanadium-based compounds are pointed out. Vanadium-based compounds as cathode materials for AZIBs are hoped to flourish in the coming years and attract more and more researchers' attention.

Hydrogel Polymer-PBA Nanocomposite Thin Film-Based Bifunctional Catalytic Electrode for Water Splitting: The Unique Role of the Polymer Matrix in Enhancing the Electrocatalytic Efficiency

A novel approach to efficient bifunctional catalytic electrodes for water splitting is developed, based on a counterintuitive choice of an insulating hydrogel polymer (chitosan, CS)-Prussian blue analogue (PBA, KCoFe) nanocomposite thin film on nickel foam. The polymer matrix in KCoFe-CS enables the formation of framelike structures of the non-noble metal-based catalyst nanocrystals, in addition to improving their stability. An optimized cycling protocol leads to a substantial enhancement of the electrocatalytic efficiency for oxygen evolution reaction (OER) as well as hydrogen evolution reaction (HER), achieving relatively low overpotentials of 272 and 320 mV (@ 10 and 20 mA cm^-2) and 146 mV (@ 10 mA cm^-2), respectively, reduced Tafel slopes, and increased Faradaic efficiencies of 98 and 96%; the overpotentials estimated based on the electrochemically active surface area show similar trends. The polymer encapsulation and the cycling protocol are key to the realization of the desirable combination of enhanced efficiency and stability demonstrated up to 50 h for both OER and HER. Detailed characterizations of the postcycling catalytic electrode show that favorable morphological changes of the polymer matrix with concomitant reduction in the PBA nanocrystal size lead to the enhanced activity. The bifunctional activity of the catalytic electrode is demonstrated by the stable water splitting achieved with a 20 mA cm^-2 current density at 1.55 V. The present study unravels the utility of hydrogel polymer matrices (without the use of binders like Nafion) in realizing sustainable water splitting electrocatalysts with high stability and efficiency, through the combined effect of confining the electrolyte within and favorably modifying the catalyst nanoparticles and the nanocomposite morphology.

Controlling the electrochemical activity of dahlia-like β-NiS@rGO by interface polarization

Transition metal sulfides have become more and more important in the field of energy storage due to their superior chemical and physical properties. Herein, dahlia β-NiS with a rough surface and β-NiS@reduced graphene oxide (rGO) have been green synthesized by a one-step hydrothermal method. The interface characteristics of β-NiS@ rGO composites have been systematically studied by XPS, Raman, and first-principles calculations. It is found that the residual O atoms in the interface and the polarization charge generated by them play an important role in performance enhancement. The NiS@rGO composite material has the best electrochemical performance when the C/O ratio is 6.48. Furthermore, we designed a NiS@rGO//rGO asymmetric supercapacitor with a potential window of 1.7 V. Its excellent energy density and power density demonstrate the advantages of the optimized NiS@rGO electrode. When the power density is 850 W kg^-1, the energy density can reach 40.4 W h kg^-1. Even at a power density of up to 6800 W kg^-1, the energy density can be maintained at 17.6 W h kg^-1. These encouraging results provide a possible pathway for designing asymmetric supercapacitors with ultra-high performance and a feasible strategy for the precise control of electrochemical performance.

Ratiometric Electrochemical Sensor for Butralin Determination Using a Quinazoline-Engineered Prussian Blue Analogue

A ratiometric electrochemical sensor based on a carbon paste electrode modified with quinazoline-engineered ZnFe Prussian blue analogue (PBA-qnz) was developed for the determination of herbicide butralin. The PBA-qnz was synthesized by mixing an excess aqueous solution of zinc chloride with an aqueous solution of precursor sodium pentacyanido(quinazoline)ferrate. The PBA-qnz was characterized by spectroscopic and electrochemical techniques. The stable signal of PBA-qnz at +0.15 V vs. Ag/AgCl, referring to the reduction of iron ions, was used as an internal reference for the ratiometric sensor, which minimized deviations among multiple assays and improved the precision of the method. Furthermore, the PBA-qnz-based sensor provided higher current responses for butralin compared to the bare carbon paste electrode. The calibration plot for butralin was obtained by square wave voltammetry in the range of 0.5 to 30.0 µmol L^-1, with a limit of detection of 0.17 µmol L^-1. The ratiometric sensor showed excellent precision and accuracy and was applied to determine butralin in lettuce and potato samples.

Different Growth Behavior of MOF-on-MOF Heterostructures to Enhance Oxygen Evolution

The exploration of non-noble metal electrocatalysts with high catalytic activity and stability for oxygen evolution reaction (OER) has become particularly urgent. Here, FeNi-based Prussian blue analogues (PBAs) were obtained by adding different solvents, where PBA particles preferentially grew on the surface plane/edge of coordination polymer precursor (Ni-ABDC) with various polarities. This resulted in the formation of FeNi-PBA-plane/edge morphologies, respectively. Notably, on account of more exposed PBAs, FeNi nanoparticles were uniformly supported on the porous N-doped carbon nanomaterials. Among them, the calcined FeNi-NC-800 underwent an interesting pre-activation process and exhibited a low overpotential of 281 mV at 10 mA cm^-2 and a small Tafel slope of 82 mV dec^-1 in 1.0 m KOH. This bimetallic sample showed superior OER activity and stability in comparison with control materials, which could be attributed to its abundant FeNi nanoparticles, high nitrogen content, large specific surface area, and synergistic effects between Fe and Ni atoms. In addition, relevant theoretical calculation on the optimal catalyst, FeNi-NC-800, further demonstrated its efficient OER performance with effective Fe-doping in the Ni-based oxyhydroxides.

Hotspots analysis and perspectives of Prussian blue analogues (PBAs) in environment and energy in recent 20 years by CiteSpace

Prussian blue analogs (PBAs), a type of metal-organic frameworks (MOFs), have attracted much attention because of their large specific surface area, high porosity, easy synthesis, and low cost. This paper presents the first review of PBAs by applying the bibliometric visualization software CiteSpace. The co-occurrence, co-citation, and clustering analysis of 2214 articles in the Web of Science database on the topic of "Prussian blue analogs" over the past 20 years were performed. The results provide a comprehensive overview of the evolution of the research hotspots for this material, and most importantly, it is identified that the research hotspots and trends for PBAs materials are concentrated in the environmental and energy fields. For example, the material is used as an adsorbent or catalyst to reduce pollutants, produce clean energy, or for energy storage applications such as batteries or supercapacitors. Finally, some outlooks are provided on the future research trends of this material in the environmental and energy fields, presenting the challenges faced by this material. For instance, the conductivity and corrosion resistance of the material needs to be improved and secondary contamination should be decreased or even avoided. It is believed that this paper would provide a comprehensive, systematic, and dynamic overview of the research of PBAs, and promote the future research of PBAs in the fields of environment and energy.

Biosensor based on bimetallic/graphene composite for non-enzymatic detection of hydrogen peroxide in living tumor cells

A highly sensitive electrochemical biosensor was manufactured with triple synergistic catalysis to detect hydrogen peroxide (H₂ O₂ ). In this study, a highly sensitive biosensor based on Prussian blue-chitosan/graphene-hemin nanomaterial/platinum and palladium nanoparticles (PB-CS/HGNs/Pt&Pd biosensor) was fabricated for the detection of H₂ O₂ . The materials described above were modified on the electrode surface and applied to catalyze the breakdown of hydrogen peroxide. The current response of the biosensor presented a linear relationship with H₂ O₂ concentration from 6 × 10^-2 to 20 μM (R² = 0.9766) and with the logarithm of H₂ O₂ concentration from 20 to 9×10³  μM (R² = 0.9782), the low detection limit of 25 nM was obtained at the signal/noise (S/N) ratio of 3. Besides, the biosensor showed an outstanding anti-interference ability and acceptable reproducibility. PB-CS/HGNs/Pt&Pd electrodes are effective in measuring H₂ O₂ from living tumor cells, which implies that the biosensor has the potential to assess reactive oxygen species in various living tumor cells.

Mixed Cu-Fe Sulfides Derived from Polydopamine-Coated Prussian Blue Analogue as a Lithium-Ion Battery Electrode

Batteries employing transition-metal sulfides enable high-charge storage capacities, but polysulfide shuttling and volume expansion cause structural disintegration and early capacity fading. The design of heterostructures combining metal sulfides and carbon with an optimized morphology can effectively address these issues. Our work introduces dopamine-coated copper Prussian blue (CuPB) analogue as a template to prepare nanostructured mixed copper-iron sulfide electrodes. The material was prepared by coprecipitation of CuPB with in situ dopamine polymerization, followed by thermal sulfidation. Dopamine controls the particle size and favors K-rich CuPB due to its polymerization mechanism. While the presence of the coating prevents particle agglomeration during thermal sulfidation, its thickness demonstrates a key effect on the electrochemical performance of the derived sulfides. After a two-step activation process during cycling, the C-coated KCuFeS₂ electrodes showed capacities up to 800 mAh/g at 10 mA/g with nearly 100% capacity recovery after rate handling and a capacity of 380 mAh/g at 250 mA/g after 500 cycles.

Poly(azure C)-coated CoFe Prussian blue analogue nanocubes for high-energy asymmetric supercapacitors

Prussian blue analogues are considered as promising supercapacitor electrode materials due to their high theoretical capacitance and low cost. Yet, they suffer from poor electronic conductivity and cycling life. Here, a redox dye polymer, poly(azure C) (PAC), is in-situ grown uniformly on CoFe Prussian blue analogue (CoFePBA). As a polymer mediator, the PAC coating on each PBA not only enhances the electronic conductivity and surface area, but also improves the structural stability and specific capacitance of PBA. As a result, the optimized CoFePBA@PAC possesses ultrahigh specific capacitance (968.67 F g^-1 at 1 A g^-1), superior rate performance (665.78 F g^-1 at 10 A g^-1), and excellent long-cycling stability (92.45% capacity retention after 2000 cycles). As an application, a fabricated CoFePBA@PAC//AC asymmetric supercapacitor (AC = activated carbon) maintains 84.7% capacitance retention in 2000 cycles at 1 A g^-1 and displays a superior specific energy of 29.16 W h kg^-1 at the power density of 799.78 W kg^-1. These results demonstrate that redox dye polymer-coated PBAs with outstanding performance have a promising prospect in the field of energy storage.

Co-Precipitation Synthesis of Co3[Fe(CN)6]2·10H2O@rGO Anode Electrode for Lithium-Ion Batteries

Rechargeable lithium-ion batteries (LIBs) are known to be practical and cost-effective devices for storing electric energy. LIBs have a low energy density, which calls for the development of new anode materials. The Prussian blue analog (PBA) is identified as being a candidate electrode material due to its facile synthesis, open framework structures, high specific surface areas, tunable composition, designable topologies and rich redox couples. However, its poor electrical conductivity and mechanical properties are the main factors limiting its use. The present study loaded PBA (Co₃[Fe(CN)₆]·10H₂O) on graphene oxide (Co-Fe-PBA@rGO) and then conducted calcination at 300 °C under the protection of nitrogen, which reduced the crystal water and provided more ion diffusion pathways. As a result, Co-Fe-PBA@rGO showed excellent performance when utilized as an anode in LIBs, and its specific capacities were 546.3 and 333.2 mAh g⁻¹ at 0.1 and 1.0 A g⁻¹, respectively. In addition, the electrode also showed excellent performance in the long-term cycle, and its capacity reached up to 909.7 mAh g⁻¹ at 0.1 A g⁻¹ following 100 cycles.

The synthesis of zeolitic imidazolate framework/prussian blue analogue heterostructure composites and their application in supercapacitors

ZIF-67/PBA heterostructure composites was prepared by the ion-exchange method with ZIF-67 nanoparticles as host MOFs. The electrochemical performance of the ZIF-67/PBA heterostructure composites improved after low-temperature calcination.