Matrix-immobilized organoclay for the sorption of polycyclic aromatic hydrocarbons and pentachlorophenol from groundwater

Using L. minor and C. elegans to assess the ecotoxicity of real-life contaminated soil samples and their remediation by clay- and carbon-based sorbents

Toxic substances, such as polycyclic aromatic hydrocarbons (PAHs) and heavy metals, can accumulate in soil, posing a risk to human health and the environment. To reduce the risk of exposure, rapid identification and remediation of potentially hazardous soils is necessary. Adsorption of contaminants by activated carbons and clay materials is commonly utilized to decrease the bioavailability of chemicals in soil and environmental toxicity in vitro, and this study aims to determine their efficacy in real-life soil samples. Two ecotoxicological models (Lemna minor and Caenorhabditis elegans) were used to test residential soil samples, known to contain an average of 5.3, 262, and 9.6 ppm of PAHs, lead, and mercury, for potential toxicity. Toxicity testing of these soils indicated that 86% and 58% of soils caused ≤50% inhibition of growth and survival of L. minor and C. elegans, respectively. Importantly, 3 soil samples caused ≥90% inhibition of growth in both models, and the toxicity was positively correlated with levels of heavy metals. These toxic soil samples were prioritized for remediation using activated carbon and SM-Tyrosine sorbents, which have been shown to immobilize PAHs and heavy metals, respectively. The inclusion of low levels of SM-Tyrosine protected the growth and survival of L. minor and C. elegans by 83% and 78%, respectively from the polluted soil samples while activated carbon offered no significant protection. These results also indicated that heavy metals were the driver of toxicity in the samples. Results from this study demonstrate that adsorption technologies are effective strategies for remediating complex, real-life soil samples contaminated with hazardous pollutants and protecting natural soil and groundwater resources and habitats. The results highlight the applicability of these ecotoxicological models as rapid screening tools for monitoring soil quality and verifying the efficacy of remediation practices.

Hydrophilicity of Organically Modified Montmorillonite and Effect on Benzene Adsorption by the Molecular Dynamics Method

Interlayer modification of layered materials with organocations has been known to endow the nanocomposite with hydrophobicity, and adsorption of aromatic compounds in the aqueous phase has been investigated for decades by using montmorillonite, a representative layered clay mineral, as the host material. Usage of the organocation has been believed to be effective due to the π-π interaction with the aromatic adsorbate, the presence of which is not verified spectroscopically in the water-immersed state. Considering that the organocation is generally regarded as a pillar to keep the interlayer space, the interaction between the organocation and adsorbate has not yet been clarified sufficiently. In the present study, we revealed the role of the organocation by the molecular dynamics method, where tetramethylammonium (TMA) and trimethylphenylammonium (TMPA) ions were selected as the representative and simple organocations, and benzene was the adsorbate to exclude the effect of the substitution group. Both H2O and benzene molecules were introduced in the interlayer of TMA- or TMPA-modified montmorillonite to model the water-immersed adsorption structure. It was found that H2O is preferentially distributed on the clay surface, followed by the center of the interlayer when the amount of H2O is large. In the adsorption model, benzene was vertically adsorbed on the clay surface. Radial distribution function analysis revealed that benzene is distributed around both the methyl and the phenyl groups in the TMA and TMPA cations, but the orientation of the phenyl ring is not consistent with that of benzene. Thus, benzene was found not to form the π-π interaction in montmorillonite modified with the TMPA cations in the water-immersed state. Furthermore, the surface was partly covered with the phenyl group in the TMPA cation, decreasing the adsorption area. Therefore, the experimental suggestion that benzene is adsorbed on the clay surface was reproduced by our simulation, and the interaction between the organocation and benzene and surface occupancy should be paid attention to maximize the adsorption property.

Adsorption of Polycyclic Aromatic Hydrocarbons by Natural, Synthetic and Modified Clays

Polycyclic aromatic hydrocarbons (PAHs) are of major scientific concern owing to their widespread presence in environmental compartments and their potential toxicological effects on humans and biota. In this study, the adsorption capacity of natural (montmorillonite (Mt)), synthetic (Na-Mica-4), and modified (with octadecylamine and octadecyltrimethylamine (ODA-Mt, ODA-Mica-4, and ODTMA-Mt and ODTMA-Mica-4)) clays were assessed and compared for the removal of 16 PAHs. Materials were synthesized and characterized by X-Ray diffraction, Zeta potential, and Fourier-transform infrared spectroscopy. The results showed its correct preparation and the incorporation of PAHs in the structure of the clays after the adsorption tests. The proposed materials were effective PAH adsorbents, with adsorption percentages close to 100%, in particular those using Mt. Mt and Na-Mica-4 presented a better adsorption capacity than their organofunctionalized derivatives, indicating that the adsorption of PAHs may occur both in the surface part and in the interlayer. The proposed adsorbents take the advantage of being a low cost and highly effective. They can be an interesting alternative for wastewater treatment and soil remediation to prevent PAH contamination.

Application of seven different clay types in sorbent-modified biodegradability studies with cationic biocides

The cationic surfactants cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC) can exert inhibitory effects on micro-organisms responsible for their biodegradation. However, under environmentally relevant exposure scenarios the presence of and sorption to organic and inorganic matter can lead to significant reduction of inhibitory effects. In our studies we investigated silica gel and seven clays as inert sorbents to mitigate these inhibitory effects in a 28 day manometric respirometry biodegradation test. CTAB was not inhibitory to the used inoculum, but we did observe that seven out of eight sorbents increased maximum attainable biodegradation, and four out of eight decreased the lag phase. The strongly inhibitory effect of CPC was successfully mitigated by most sorbents, with five out of eight allowing >50% biodegradation within 28 days. Results further indicate that bioaccessibility of the sorbed fractions in the stirred manometric test systems was higher than in calmly shaken headspace test systems. Bioaccessibility might also be limited depending on characteristics of test chemical and sorbent type, with montmorillonite and bentonite apparently providing the lowest level of bioaccessibility with CPC. Clay sorbents can thus be used as environmentally relevant sorbents to mitigate potential inhibitory effects of test chemicals, but factors that impede bioaccessibility should be considered. In addition to apparently increased bioaccessibility due to stirring, the automated manometric respirometry test systems give valuable and highly cost-effective insights into lag phase and biodegradation kinetics; information that is especially relevant for test chemicals of gradual biodegradability.

Purification of real car wash wastewater with complex coagulation/flocculation methods using polyaluminum chloride, polyelectrolyte, clay mineral and cationic surfactant

In the present study, real car wash wastewater was purified by different coagulation/flocculation methods. As coagulant, polyaluminum chloride ('BOPAC'), conventional iron(III) chloride, iron(III) sulfate, and aluminum(III) chloride were used, while as flocculant non-ionic and anionic polyelectrolytes were investigated. The effects of added clay mineral (Na-bentonite) and cationic surfactant (hexadecyltrimethyl ammonium bromide - 'HTABr') were also investigated. The use of BOPAC was significantly more effective than conventional coagulants. Extra addition of clay mineral was also beneficial in relation to both the sediment volume and sedimentation speed, while polyelectrolyte addition enhanced further the sedimentation. Moreover, the simultaneous addition of HTABr significantly enhanced the color removal efficiency due to the successful in-situ generation of organophilic bentonite. In summary, the application of 100 mg L^-1 Na-bentonite with 20 mg L^-1 Al³⁺ (from BOPAC) and 0.5 mg L^-1 anionic polyelectrolyte resulted in the efficient reduction of the turbidity (4-6 NTU), the COD (158 mg L^-1) and the extractable oil content (4 mg L^-1) with efficiencies of 98%, 59%, and 85%, respectively. By applying organophilic bentonite in high concentration (500 mg L^-1) with identical concentrations of BOPAC and anionic polyelectrolyte, significant color removal (5 times lower absorbance at λ = 400 nm) and 27% lower sediment volume were achieved.

Sorbent-modified biodegradation studies of the biocidal cationic surfactant cetylpyridinium chloride

Biodegradability studies for the cationic surfactant cetylpyridinium chloride (CPC) are hampered by inhibitory effects on inoculum at prescribed test concentrations (10-20 mg organic carbon/L). In this study, we used ¹⁴C labeled CPC in the 28 d Headspace Test (OECD 310) and demonstrated that CPC was readily biodegradable (10->60% mineralization within a 10 day window) at test concentrations 0.006-0.3 mg/L with CPC as single substrate. Biodegradation efficiency was comparable over this concentration range. CPC inhibited degradation at 1 mg/L and completely suppressed inoculum activity at 3 mg/L. In an extensive sorbent modified biodegradation study we evaluated the balance between CPC bioaccessibility and toxicity. A non-inhibitory concentration of 0.1 mg/L CPC was readily biodegradable with 83% sorbed to SiO₂, while biodegradation was slower when 96% was sorbed. SiO₂ mitigated inhibitory effects of 1 mg/L CPC, reaching >60% biodegradation within 28 d; inhibitory effects were also mitigated by addition of commercial clay powder (illite) but this was primarily reflected by a reduced lag phase. At 10 mg/L CPC SiO₂ was still able to mitigate inhibitory effects, but bioaccessibility seemed limited as only 20% biodegradation was reached. Illite limited bioaccessibility more strongly and was not able to sustain biodegradation at 10 mg/L CPC.

Development of High Capacity Enterosorbents for Aflatoxin B1 and Other Hazardous Chemicals

Previously, a calcium montmorillonite clay (NovaSil) included in the diet of animals has been shown to bind aflatoxin B1 (AfB1) and reduce the symptoms of aflatoxicosis. To investigate and improve the capacity and efficacy of clay-based materials as aflatoxin sorbents, we developed and tested calcium and sodium montmorillonite clays amended with nutrients including l-carnitine and choline. Also, we determined the sorption of AfB1 by isothermal analysis and tested the ability of these amended sorbents to protect adult hydra from AfB1 toxicity. The results showed that exchanging montmorillonite clays with l-carnitine and choline inhibited swelling of the clays and increased the sorption capacity and efficacy of clay surfaces for AfB1. Results from dehydroxylated and heat-collapsed clays suggested that AfB1 was primarily adsorbed in the clay interlayer, as predicted from thermodynamic calculations and computational modeling. The hydra bioassay further indicated that the modified clays can significantly protect adult hydra from AfB1 with as low as 0.005% clay inclusion. This enterosorbent therapy may also be applied to screen hazardous chemicals such as pesticides and PAHs based on similar sorption mechanisms. Taken together, enterosorbent therapy could be delivered in nutritional supplements, foods that are vulnerable to aflatoxin contamination, flavored liquids and animal feeds during emergencies and outbreaks of acute aflatoxicosis, and as a screening model for hazardous environmental chemicals.

Polycyclic aromatic hydrocarbons (PAHs) removal by sorption: A review

Polycyclic aromatic hydrocarbons (PAHs) are organic micro pollutants which are persistent compounds in the environment due to their hydrophobic nature. Concerns over their adverse effects in human health and environment have resulted in extensive studies on various types of PAHs removal methods. Sorption is one of the widely used methods as PAHs possess a great sorptive ability into the solid media and their low aqueous solubility property. Several adsorbent media such as activated carbon, biochar, modified clay minerals have been largely used to remove PAHs from aqueous solution and to immobilise PAHs in the contaminated soils. According to the past studies, very high removal efficiency could be achieved using the adsorbents such as removal efficiency of activated carbon, biochar and modified clay mineral were 100%, 98.6% and >99%, respectively. PAHs removal efficiency or adsorption/absorption capacity largely depends on several parameters such as particle size of the adsorbent, pH, temperature, solubility, salinity including the production process of adsorbents. Although many studies have been carried out to remove PAHs using the sorption process, the findings have not been consolidated which potentially hinder to get the correct information for future study and to design the sorption method to remove PAHs. Therefore, this paper summarized the adsorbent media which have been used to remove PAHs especially from aqueous solutions including the factor affecting the sorption process reported in 142 literature published between 1934 and 2015.

Removal of 8-quinolinecarboxylic acid pesticide from aqueous solution by adsorption on activated montmorillonites

Sodium montmorillonite (Na-M), acidic montmorillonite (H-M), and organo-acidic montmorillonite (Org-H-M) were applied to remove the herbicide 8-quinolinecarboxylic acid (8-QCA). The montmorillonites containing adsorbed 8-QCA were investigated by transmission electron microscopy, FT-IR spectroscopy, X-ray diffraction analysis, X-ray fluorescence thermogravimetric analysis, and physical adsorption of gases. Experiments showed that the amount of adsorbed 8-QCA increased at lower pH, reaching a maximum at pH 2. The adsorption kinetics was found to follow the pseudo-second-order kinetic model. The Langmuir model provided the best correlation of experimental data for adsorption equilibria. The adsorption of 8-QCA decreased in the order Org-H-M > H-M > Na-M. Isotherms were also used to obtain the thermodynamic parameters. The negative values of ΔG indicated the spontaneous nature of the adsorption process.

Effective collection of hydrophobic organic pollutants in water with aluminum hydroxide and hydrophobically modified polyacrylic acid

Polyacrylic acid was hydrophobically modified with dodecylamine and used as a coagulant for coprecipitation of hydrophobic organic pollutants from water. The polymer coagulant induced effective aggregation of aluminum hydroxide having hydrophobic regions which are essential for the incorporation of hydrophobic organic pollutants. Recoveries of the organic pollutants increased with increasing the dodecylamine content, which indicated that the dodecylamine moiety played an important role in the formation of hydrophobic area on the precipitate. Different hydrophobic organic pollutants that had hardly been removed by the conventional coprecipitation were successfully collected by the proposed method.

Removal of polycyclic aromatic hydrocarbons and phenols from coking wastewater by simultaneously synthesized organobentonite in a one-step process

The optimal condition for a one-step process removing organic compounds from coking wastewater by simultaneously synthesized organobentonite as a pretreatment was investigated. Results showed that sorption of organic compounds by organobentonite was positively correlated to the cation surfactant exchange on the bentonite and the octanol-water partition coefficient (Kow) of the solutes. With 0.75 g/L bentonite and 180 mg/L (60% of bentonite cation exchange capacity) cetyltrimethylammonium bromide, the removal efficiencies of the 16 polycyclic aromatic hydrocarbon (PAHs) specified by the US Environmental Protection Agency in coking wastewater except naphthalene were more than 90%, and that of benzo(a)pyrene was 99.5%. At the same time, the removal efficiencies of COD(Cr), NH3-N, volatile phenols, colour and turbidity were 28.6%, 13.2%, 8.9%, 55% and 84.3%, respectively, and the ratio of BOD5/COD(Cr) increased from 0.31 to 0.41. These results indicated that the one-step process had high removal efficiency for toxic and refractory hydrophobic organic compounds, and could improve the biodegradability of the coking wastewater. Therefore it could be a promising technology for the pretreatment of toxic and refractory organic wastewater.

Clay enriched silk biomaterials for bone formation

The formation of silk protein/clay composite biomaterials for bone tissue formation is described. Silk fibroin serves as an organic scaffolding material offering mechanical stability suitable for bone-specific uses. Clay montmorillonite (Cloisite® Na(+)) and sodium silicate are sources of osteoinductive silica-rich inorganic species, analogous to bioactive bioglass-like bone repair biomaterial systems. Different clay particle-silk composite biomaterial films were compared with silk films doped with sodium silicate as controls for the support of human bone marrow derived mesenchymal stem cells in osteogenic culture. The cells adhered to and proliferated on the silk/clay composites over 2 weeks. Quantitative real time polymerase chain reaction analysis revealed increased transcript levels for alkaline phosphatase, bone sialoprotein, and collagen type 1 osteogenic markers in the cells cultured on the silk/clay films in comparison with the controls. Early evidence of bone formation based on collagen deposition at the cell-biomaterial interface was also found, with more collagen observed for the silk films with higher contents of clay particles. The data suggest that silk/clay composite systems may be useful for further study for bone regenerative needs.

Removal of organic pollutants in model water and thermal wastewater using clay minerals

Water treatment method was developed for the removal of different anionic dyes such as methyl orange and indigo carmine, and also for thymol applying sodium bentonite and cationic surfactant - hexadecyltrimethylammonium bromide (HTAB) - or polyelectrolytes (polydiallyldimethylammonium chloride, poly-DADMAC and poly-amines). The removal efficiency of these model substrates was examined in model water using UV-Vis spectrophotometry, HPLC and TOC analysis. The clay mineral and HTAB were added in one step to the polluted model water in Jar-test experiments. The influence of the cation exchange capacity (CEC) of the applied clay mineral and the presence of polyaluminium chloride coagulant (BOPAC) were also tested for the water treatment process. The structures of the in situ produced and pre-prepared organoclay composites were compared by XRD analysis. The rapid formation of organoclay adsorbents provided very efficient removal of the dyes (65-90 % in 3-10 mg/L TOC(0) range) with 200 mg/L sodium bentonite dose, however thymol was less efficiently separated. Adsorption efficiencies of the composites were compared at different levels of ion exchange such as at 40, 60 and 100 %. In the case of thymol, the elimination of inorganic carbon from the model water before the TOC analysis resulted in some loss of the analysed volatile compound therefore the HPLC analysis was found to be the most suitable tool for the evaluation of the process. This one-step adsorption method using in situ formed organoclay was better performing than the conventional process in which the montmorillonite-surfactant composite is pre-preapared and subsequently added to the polluted water. The purification performance of this method was also evaluated on raw and artificially polluted thermal wastewater samples containing added thymol.

Adsorption of naphthalene onto sonicated talc from aqueous solutions

The adsorption behavior of naphthalene onto naturally hydrophobic talc from aqueous solution was investigated in this study. The natural talc was first pretreated by sonication to improve the surface characteristics and enhance the uptake capacity by increasing the specific surface area (SSA) of talc. The naphthalene uptake of talc was found as 276 mg g(-1) and increased to 359 mg g(-1) after the sonication. Adsorption studies also showed that the adsorption of naphthalene onto the sonicated talc was not affected by changes in pH suggesting that the main driving forces for naphthalene adsorption onto talc was hydrophobic bonding rather than electrostatic force. The pseudo-first and pseudo-second orders and intraparticle diffusion equation were used to evaluate the kinetic data and the constants were determined. Adsorption process of naphthalene onto talc followed the pseudo-second-order rate expression for different initial naphthalene concentrations. The Langmuir and Freundlich isotherm models were used to model the isotherm data for their applicability. The Freundlich isotherm best fitted for the adsorption of naphthalene onto talc.

Evaluation of butyl rubber as sorbent material for the removal of oil and polycyclic aromatic hydrocarbons from seawater

Ecological disasters resulting from oil spills have created a great need to find more efficient materials for oil spill cleanup. This research highlights the use of a novel macroporous polymeric material based on butyl rubber (BR) as a sorbent in an oil spill cleanup. The sorption capacity of BR for crude oil and petroleum products is 15-23 g g(-1) as compared to the value of 10-16 g g(-1) obtained using a nonwoven polypropylene (PP), a widely used commercial oil sorbent. BR sorbent is reusable after simple squeezing and its continuous sorption capacity for crude oil is 7.6 g g(-1) in each cycle, about 3 times the capacity of the PP sorbent BR sorbents also remove efficiently polycyclic aromatic hydrocarbons (PAHs) such as acenaphthene and pyrene from seawaters. The results suggest that the rubber sorbents are a better alternative to the widely used PP sorbents by improving the efficiency of oil sorption and the reusability of the sorbent.

Sorption of 1,1,1-trichloro-2,2-bis(p-chlorophenyl) ethane (DDT) by clays and organoclays

This study focused on the sorption isotherms of 1,1,1-trichloro-2,2-bis(p-chlorophenyl) ethane (p,p'-DDT) and 1,1-dichloro-2,2-bis(p-chlorophenyl) ethylene (p,p'-DDE) on different original clays (i.e., zeolite, montmorillonite and attapulgite) and organoclay complexes. Sorption of organic pollutants was determined using gas chromatographic (GC) techniques to investigate the sorption behavior, and characterize the effect of, different organic cations. The original clays only sorbed low amounts of p,p'-DDT and p,p'-DDE, and the sorptive curves can be classified as L-shaped. Organoclays exhibited higher amounts of p,p'-DDT and p,p'-DDE sorption. The p,p'-DDT and p,p'-DDE sorption increased with increasing total organic carbon (OC) content of the organoclays. For hexadecyltrimethylammonium (HDTMA)-modified organoclays, the dominant adsorptive medium showed the partitioning sorption of hydrophobic-hydrophobic interaction, indicating no competitive sorption. The sorptive curves can be classified as C-shaped of constant partition (CP). However, benzyltrimethylammonium (BTMA)-modified organoclays exhibited competitive sorption. The sorption isotherm curves can be classified as S-shaped. The sorptive capacity of the HDTMA-modified organoclays for p,p'-DDT were higher than those for p,p'-DDE, but the BTMA-modified organoclays showed a reverse trend. This can be attributed to the different structures and shapes of organic cations, giving different sorptive mechanisms. The p,p'-DDT and p,p'-DDE sorption onto HDTMA-modified organoclays were caused by chemical interaction, with the BTMA modified organoclays occuring due to physical sorption.

Removal of pentachlorophenol from aqueous solutions by dolomitic sorbents

The partial decomposition of dolomite carried out within the temperature range 600-1000 degrees C provides new sorbents, called dolomitic sorbents. Their surface properties and identification by X-ray diffraction are discussed. The lowest specific surface area value was found for the raw dolomite, while the highest value was achieved by the D-1000 sample. The adsorption equilibrium of pentachlorophenol from aqueous solutions on the examined sorbents was investigated at 30, 40, and 50 degrees C via a bath process. Langmuir, Freundlich, Langmuir-Freundlich, and Redlich-Petersen models were fitted to experimental equilibrium data, and their goodnesses of fit are compared. The adjustable parameters of Langmuir-Freundlich and Redlich-Petersen isotherms were estimated by nonlinear least-squares analysis. Langmuir and Freundlich models were found insufficient to explain the adsorption equilibrium, while Langmuir-Freundlich and Redlich-Petersen isotherms provide the best correlation of the pentachlorophenol adsorption onto dolomitic sorbents.