An overview of environmental hazards and exposure risk of hydrofluorocarbons (HFCs)

Exploiting Metal-Organic Frameworks for Vinylidene Fluoride Adsorption: From Force Field Development, Computational Screening to Machine Learning

Metal-organic frameworks (MOFs) represent a distinctive class of nanoporous materials with considerable potential across a wide range of applications. Recently, a handful of MOFs has been explored for the storage of environmentally hazardous fluorinated gases (Keasler et al. Science 2023, 381, 1455), yet the potential of over 100,000 MOFs for this specific application has not been thoroughly investigated, particularly due to the absence of an established force field. In this study, we develop an accurate force field for nonaversive hydrofluorocarbon vinylidene fluoride (VDF) and conduct high-throughput computational screening to identify top-performing MOFs with high VDF adsorption capacities. Quantitative structure-property relationships are analyzed via machine learning models on the combinations of geometric, chemical, and topological features, followed by feature importance analysis to probe the effects of these features on VDF adsorption. Finally, from detailed structural analysis via radial distribution functions and spatial densities, we elucidate the significance of different interaction modes between VDF and metal nodes in top-performing MOFs. By synergizing force-field development, computational screening, and machine learning, our findings provide microscopic insights into VDF adsorption in MOFs that will advance the development of new nanoporous materials for high-performance VDF storage or capture.

A combined experimental and computational investigation on the OH radical and Cl atom-initiated reaction of 2,3-dichloropropene in troposphere

Temperature-dependent kinetics of OH radical and Cl atom-initiated reaction of an important halogenated alkene, 2,3-Dichloropropene (23DCP), were investigated using absolute and relative methods over 278-363 K. Pulsed laser photolysis - laser induced fluorescence technique and relative rate method using gas chromatography with flame ionization detector were employed for studying the kinetics of 23DCP with OH radical and Cl atom, respectively. The obtained Arrhenius expressions were kOH(expt)=(4.08 ± 1.63) × 10-13exp{(1043 ± 124)/T} cm3 molecule-1 s-1 and kCl(expt)=(1.54 ± 0.24) × 10-11exp{(705 ± 48)/T} cm3 molecule-1 s-1. Computational calculations were conducted to validate our experimental kinetic results and provide new insights into the importance of a particular pathway among all based on thermodynamic parameters. The addition of OH/Cl to the terminal carbon of the double bond present in 23DCP proved to be the predominant pathway across the selected temperature range for the present study (200-400 K). The degradation mechanism of these reactions was proposed by analyzing the products with the aid of gas chromatography with mass spectrometry. Calculating various atmospheric implication parameters can help to understand how the release of 23DCP may affect the troposphere.

Chemical Investigation on the Mechanism and Kinetics of the Atmospheric Degradation Reaction of Trichlorofluoroethene by OH⋅ and Its Subsequent Fate in the Presence of O2 /NOx

The M06-2X/6-311++G(d,p) level of theory was used to examine the degradation of Trichlorofluoroethene (TCFE) initiated by OH⋅ radicals. Additionally, the coupled-cluster single-double with triple perturbative [CCSD(T)] method was employed to refine the single-point energies using the complete basis set extrapolation approach. The results indicated that OH-addition is the dominant pathway. OH⋅ adds to both the C1 and C2 carbons, resulting in the formation of the C(OH)Cl2 -⋅CClF and ⋅CCl2 -C(OH)ClF species. The associated barrier heights were determined to be 1.11 and -0.99 kcal mol-1 , respectively. Furthermore, the energetic and thermodynamic parameters show that pathway 1 exhibits greater exothermicity and exergonicity compared to pathway 2, with differences of 8.11 and 8.21 kcal mol-1 , correspondingly. The primary pathway involves OH addition to the C2 position, with a rate constant of 6.2×10-13  cm3 molecule-1 sec-1 at 298 K. This analysis served to estimate the atmospheric lifetime, along with the photochemical ozone creation potential (POCP) and ozone depletion potential (ODP). It yielded an atmospheric lifetime of 8.49 days, an ODP of 4.8×10-4 , and a POCP value of 2.99, respectively. Radiative forcing efficiencies were also estimated at the M06-2X/6-311++G(d,p) level. Global warming potentials (GWPs) were calculated for 20, 100, and 500 years, resulting in values of 9.61, 2.61, and 0.74, respectively. TCFE is not expected to make a significant contribution to the radiative forcing of climate change. The results obtained from the time-dependent density functional theory (TDDFT) indicated that TCFE and its energized adducts are unable to photolysis under sunlight in the UV and visible spectrum. Secondary reactions involve the [TCFE-OH-O2 ]⋅ peroxy radical, leading subsequently to the [TCFE-OH-O]⋅ alkoxy radical. It was found that the alkoxy radical resulting from the peroxy radical can lead to the formation of phosgene (COCl2 ) and carbonyl chloride fluoride (CClFO), with phosgene being the primary product.

Insights into the prediction of the liquid density of refrigerant systems by artificial intelligent approaches

This study presents a novel model for accurately estimating the densities of 48 refrigerant systems, categorized into five groups: Hydrofluoroethers (HFEs), Hydrochlorofluorocarbons (HCFCs), Perfluoroalkylalkanes (PFAAs), Hydrofluorocarbons (HFCs), and Perfluoroalkanes (PFAs). Input variables, including pressure, temperature, molecular weight, and structural groups, were systematically considered. The study explores the efficacy of both the multilayer perceptron artificial neural network (MLP-ANN) and adaptive neuro-fuzzy inference system (ANFIS) methodologies in constructing a precise model. Utilizing a comprehensive dataset of 3825 liquid density measurements and outlier analysis, the models achieved R2 and MSE values of 0.975 & 0.5575 and 0.967 & 0.7337 for MLP-ANN and ANFIS, respectively, highlighting their remarkable predictive performance. In conclusion, the ANFIS model is proposed as an effective tool for estimating refrigerant system densities, particularly advantageous in scenarios where experimental measurements are resource-intensive or sophisticated analysis is required.

Rapeseed Oil as Feedstock for Bio-Based Thermoset Foams Obtained via Michael Addition Reaction

Rapeseed oil was used to develop thermoset foams via Michael addition reaction by mixing two liquid components, Michael donor and Michael acceptor. The foaming of the curing thermoset was achieved by the physical blowing agent which expanded from the reacting foam mass due to an exothermic curing reaction. The influence of the rapeseed oil-based Michael donor functionality on the foaming process and the characteristics of the obtained thermoset foams was studied. The 1,1,3,3-tetramethylguanidine catalyst's influence on the foaming process kinetics was studied using FOAMAT equipment. The curing of the bio-based thermoset was analysed using a dielectric polarisation sensor. The morphology of the developed thermoset foam was analysed using a scanning electron microscope and the obtained foams were characterized using TGA, DSC, DMA and mechanical analysis tests. A direct correlation between the thermoset foam polymer crosslinking density and foaming reactivity, mechanical properties and glass transition temperature were determined. Obtained rapeseed oil based thermoset foams had a relatively low thermal conductivity of 33.9-35.4 mW/(m·K) which allows their use as thermal insulation material in civil engineering applications.

Advanced electrocatalytic redox processes for environmental remediation of halogenated organic water pollutants

Halogenated organic compounds are widespread, and decades of heavy use have resulted in global bioaccumulation and contamination of the environment, including water sources. Here, we introduce the most common halogenated organic water pollutants, their classification by type of halogen (fluorine, chlorine, or bromine), important policies and regulations, main applications, and environmental and human health risks. Remediation techniques are outlined with particular emphasis on carbon-halogen bond strengths. Aqueous advanced redox processes are discussed, highlighting mechanistic details, including electrochemical oxidations and reductions of the water-oxygen system, and thermodynamic potentials, protonation states, and lifetimes of radicals and reactive oxygen species in aqueous electrolytes at different pH conditions. The state of the art of aqueous advanced redox processes for brominated, chlorinated, and fluorinated organic compounds is presented, along with reported mechanisms for aqueous destruction of select PFAS (per- and polyfluoroalkyl substances). Future research directions for aqueous electrocatalytic destruction of organohalogens are identified, emphasizing the crucial need for developing a quantitative mechanistic understanding of degradation pathways, the improvement of analytical detection methods for organohalogens and transient species during advanced redox processes, and the development of new catalysts and processes that are globally scalable.

Changes and Trends-Efficiency of Physical Blowing Agents in Polyurethane Foam Materials

This work developed a novel method for measuring the effective rate of a PBA (physical blowing agent) and solved the problem that the effective rate of a PBA could not be directly measured or calculated in previous studies. The results show that the effectiveness of different PBAs under the same experimental conditions varied widely, from approximately 50% to almost 90%. In this study, the overall average effective rates of the PBAs HFC-245fa, HFO-1336mzzZ, HFC-365mfc, HFCO-1233zd(E), and HCFC-141b are in descending order. In all experimental groups, the relationship between the effective rate of the PBA, rePBA, and the initial mass ratio of the PBA to other blending materials in the polyurethane rigid foam, w, demonstrated a trend of first decreasing and then gradually stabilizing or slightly increasing. This trend is caused by the interaction of PBA molecules among themselves and with other component molecules in the foamed material and the temperature of the foaming system. In general, the influence of system temperature dominated when w was less than 9.05 wt%, and the interaction of PBA molecules among themselves and with other component molecules in the foamed material dominated when w was greater than 9.05 wt%. The effective rate of the PBA is also related to the states of gasification and condensation when they reach equilibrium. The properties of the PBA itself determine the overall efficiency, while the balance between the gasification and condensation processes of the PBA further leads to a regular change in efficiency with respect to w around the overall average level.

Metal-Organic Frameworks for Greenhouse Gas Applications

Using petrol to supply energy for a car or burning coal to heat a building generates plenty of greenhouse gas (GHG) emissions, including carbon dioxide (CO₂ ), water vapor (H₂ O), methane (CH₄ ), nitrous oxide (N₂ O), ozone (O₃ ), fluorinated gases. These up-and-coming metal-organic frameworks (MOFs) are structurally endowed with rigid inorganic nodes and versatile organic linkers, which have been extensively used in the GHG-related applications to improve the lives and protect the environment. Porous MOF materials and their derivatives have been demonstrated to be competitive and promising candidates for GHG separation, storage and conversions as they shows facile preparation, large porosity, adjustable nanostructure, abundant topology, and tunable physicochemical property. Enormous progress has been made in GHG storage and separation intrinsically stemmed from the different interaction between guest molecule and host framework from MOF itself in the recent five years. Meanwhile, the use of porous MOF materials to transform GHG and the influence of external conditions on the adsorption performance of MOFs for GHG are also enclosed. In this review, it is also highlighted that the existing challenges and future directions are discussed and envisioned in the rational design, facile synthesis and comprehensive utilization of MOFs and their derivatives for practical applications.

Second law assessment of di methyl ether and its mixtures in domestic refrigeration system

Dimethyl ether (DME) and its blend of refrigerants (R429A, R435A, and R510A) are considered in this study's second law analysis as potential replacements for R134a. The performance of various refrigerants in a vapour compression refrigeration system is examined using the Design package CYCLE D. The software REFPROP 9.0 is used to extract all of the thermal and physical parameters of DME and its blend of refrigerants. The Second law performance parameters such as Efficiency Defects, Entropy generation and ExergyEfficiency are discussed. The refrigerants R429A and R510A are more energy efficient than R134a across a condensing temperature range of 30 to 55 °C at - 10 °C evaporation temperature. R134a was exceeded by R429A and R510A in terms of exergetic efficiency by 2.08 and 0.43%, respectively. In comparison to other losses in different components, the compressor's exergy loss is larger at 37-40% of the total exergy loss. By employing RE170 and its blends, the Vapour Compression Refrigeration System often performs better under the second law than R134a.The result shows that the efficiency defects in the compressor are the largest, followed by the condenser and evaporator. Thus, the design improvement of a compressor is of at most importance to improve the system performance by lowering the overall irreversibility.

Influence of capillary tube length on the performance of domestic refrigerator with eco-friendly refrigerant R152a

The household heating and cooling system often use the capillary device. The use of the helical capillary eliminates the need for lightweight refrigeration devices in the system. Capillary pressure is noticeably affected by the capillary geometric parameters, such as length, mean diameter, and pitch. This paper is concerned with the effects of the capillary length on the performance of the system. Three separate length capillary tubes were used in the experiment. The data on R152a were studied under various conditions to assess the impact of varying the length. Maximum COP is obtained at an evaporator temperature of − 12 °C and capillary length of 3.65 m. The result is drawn that the system performance enhances when the capillary length is improved to 3.65 m when compared to 3.35 m and 3.96 m. As a result, as the capillary length increases up to a specific amount, the system's performance improves. The findings from the experiment were compared with those from the computational fluid dynamics (CFD) analysis.

Repurposing of F-gases: challenges and opportunities in fluorine chemistry

Fluorinated gases (F-gases) are routinely employed as refrigerants, blowing agents, and electrical insulators. These volatile compounds are potent greenhouse gases and consequently their release to the environment creates a significant contribution to global warming. This review article seeks to summarise: (i) the current applications of F-gases, (ii) the environmental issues caused by F-gases, (iii) current methods of destruction of F-gases and (iv) recent work in the field towards the chemical repurposing of F-gases. There is a great opportunity to tackle the environmental and sustainability issues created by F-gases by developing reactions that repurpose these molecules.

Visualization and Measurement of Swirling Flow of Dry Ice Particles in Cyclone Separator-Sublimator

The dry ice sublimation process of carbon dioxide (CO2) is a unique, environmentally friendly technology that can achieve a temperature of −56 °C or lower, which is a triple point of CO2 in CO2 refrigeration systems. In this study, a cyclone separator-evaporator was proposed to separate dry ice particles in an evaporator. As an initial step before introducing the cyclone separator-evaporator into an actual refrigeration system, a prototype cyclone separator-evaporator was constructed to visualize dry ice particles in a separation chamber. A high-speed camera was used to visualize the non-uniform flow of dry ice particles that repeatedly coalescence and collision in a swirl section. Consequently, the dry ice particle size and the circumferential and axial velocities of dry ice were measured. The results show that the equivalent diameter of the most abundant dry ice particles in the cyclone separation chamber is 2.0 mm. As the inner diameter of the separation section decreases, dry ice particles coalesce and grow from an equivalent diameter of 4 mm to a maximum of 40 mm. In addition, the comparison of the experimental and simulation results shows that the drag force due to CO2 gas flow is dominant in the circumferential velocity of dry ice particles.

Design of Ionic Liquids for Fluorinated Gas Absorption: COSMO-RS Selection and Solubility Experiments

In recent years, the fight against climate change and the mitigation of the impact of fluorinated gases (F-gases) on the atmosphere is a global concern. Development of technologies that help to efficiently separate and recycle hydrofluorocarbons (HFCs) at the end of the refrigeration and air conditioning equipment life is a priority. The technological development is important to stimulate the F-gas capture, specifically difluoromethane (R-32) and 1,1,1,2-tetrafluoroethane (R-134a), due to their high global warming potential. In this work, the COSMO-RS method is used to analyze the solute-solvent interactions and to determine Henry's constants of R-32 and R-134a in more than 600 ionic liquids. The three most performant ionic liquids were selected on the basis of COSMO-RS calculations, and F-gas absorption equilibrium isotherms were measured using gravimetric and volumetric methods. Experimental results are in good agreement with COSMO-RS predictions, with the ionic liquid tributyl(ethyl)phosphonium diethyl phosphate, [P2444][C2C2PO4], being the salt presenting the highest absorption capacities in molar and mass units compared to salts previously tested. The other two ionic liquids selected, trihexyltetradecylphosphonium glycinate, [P66614][C2NO2], and trihexyl(tetradecyl)phosphonium 2-cyano-pyrrole, [P66614][CNPyr], may be competitive as far as their absorption capacities are concerned. Future works will be guided on evaluating the performance of these ionic liquids at an industrial scale by means of process simulations, in order to elucidate the role in process efficiency of other relevant absorbent properties such as viscosity, molar weight, or specific heat.

Shape memory polymer foams with tunable interconnectivity using off-the-shelf foaming components

The ability to easily and safety tune pore structures of gas-blown polyurethane shape memory polymer (SMP) foams could improve their outcomes as hemostatic dressings or tissue engineering scaffolds and enable overall commercialization efforts. Incorporating physical blowing agents into the polymer mix can be used to tune pore size and interconnectivity without altering foam chemistry. Enovate (HFC-254fa) is a commonly used physical blowing agent in gas-blown foams, but the Environmental Protection Agency (EPA) considers its use unacceptable because it is a hydrofluorocarbon that contributes to global warming. Here, off-the-shelf solvents accepted for use by the EPA, acetone, dimethyoxymethane (methylal), and methyl formate, were used as physical blowing agents by adding small volumes during foam fabrication. Increasing the physical blowing agent volume resulted in greater pore interconnectivity while maintaining SMP foam chemical and thermal properties. Pore size and interconnectivity also impacted cell and blood interactions with the foams. This work provides a safe and easy method for tuning SMP foam interconnectivity to aid in future commercialization efforts in a range of potential biomedical applications.

Trends of Studies on Controlled Halogenated Gases under International Conventions during 1999–2018 Using Bibliometric Analysis: A Global Perspective

A lot of research on international convention-controlled halogenated gases (CHGs) has been carried out. However, few bibliometric analyses and literature reviews exist in this field. Based on 734 articles extracted from the Science Citation Index (SCI) Expanded database of the Web of Science, we provided the visualisation for the performance of contributors and trends in research content by using VOSviewer and Science of Science (Sci2). The results showed that the United States was the most productive country, followed by the United Kingdom and China. The National Oceanic and Atmospheric Administration had the largest number of publications, followed by the Massachusetts Institute of Technology (MIT) and the University of Bristol. In terms of disciplines, environmental science and meteorological and atmospheric science have contributed the most. By using cluster analysis of all keywords, four key research topics of CHGs were identified and reviewed: (1) emissions calculation, (2) physicochemical analysis of halocarbons, (3) evaluation of replacements, and (4) environmental impact. The change in research substances is closely related to the phase-out schedule of the Montreal Protocol. In terms of environmental impact, global warming has always been the most important research hotspot, whereas research on ozone-depleting substances and biological toxicity shows a gradually rising trend.

Double-valence photoionization of SUVA134a molecule (CFH2 CF3 )

RATIONALE

In this work we investigate the single-photon double ionization of the SUVA 134a (1,1,1,2-tetrafluoroethane) molecule in the energy range from 21.21 to 320 eV. Our experimental data are supported by Thomas' and Samson's models. It is shown that the double photoionization of the SUVA 134a can be expressed as a sum of the so-called shake-off (SO) and the knockout (KO) processes.

METHODS

The experiments were executed at the TGM beamline at Laboratório Nacional de Luz Síncrotron in Campinas, Brazil. The source of EUV and X-ray radiation was a bending magnet that enabled us to work in the photon energy range of 21.21 to 320 eV. The spectrometer was devised to collect 100% of the ions with kinetic energies up to 30 eV. The photoelectron-photoion (PEPICO) and photoelectron-photoion-photoion (PE2PICO) coincidence techniques were used in the present work.

RESULTS

The ratio of double-to-total photoionization as a function of the photon energy for the SUVA molecule exhibits remarkably similar behavior with other atomic and molecular systems. SO depends on large excess energy above the ionization threshold, enabling the photoelectron to leave the interaction region rather speedily to yield a sudden change in the Coulomb field that the shaken electron feels. The measured asymptotic SO probability is P_SO (∞) = 0.09.

CONCLUSIONS

The present analysis shows that the separation of SO and KO processes relies on the experimental evidence that there is no significant interference between SO and KO. The analysis also shows that the separate formulation of KO and SO presents a factual portrayal of double photoionization. Despite having 50 electrons, SUVA has lower double-to-total photoionization fraction (9%) in comparison, for instance, to argon atoms (~20%), which has 18 electrons. This lower e-e correlation could be attributed to its larger volume, that is, lower electron density.

Feasibility of regenerative adsorption of a hydrofluorocarbon (HFC-134a) using activated carbon fiber studied by the gaseous flow method

The adsorption and desorption behavior of the refrigerant HFC-134a on pitch-based activated carbon fibers (ACFs) with various Brunauer-Emmett-Teller surface areas was investigated by the flow method. Fixed-bed adsorption experiments performed at 20, 5, -15, -20, and -25 °C showed that the use of lower temperatures resulted in an increase in the adsorption capacity of the ACF. In particular, the complete adsorption time was dramatically increased at -25 °C. Crucially, even after five cycles of adsorption at -20 °C and desorption at 30 °C of HFC-134a in a electrothermal swing adsorption apparatus, significant decreases in the adsorption capability were not observed. The desorption of HFC-134a from saturated ACF was carried out using electric power directly applied to the ACF itself. The electric heating increased the ACF temperature, causing desorption within several minutes. The results of this study show that the regenerative adsorption of HFC-134a by ACF coupled with electric power is possible.

Investigation of propellant-free aqueous foams as pharmaceutical carrier systems

Due to their light consistency and good spreadability, aqueous foams are considered as convenient and highly accepted drug carrier systems that are of great importance in the field of topical drug delivery. The production of a stable, easy to dose, preferably environmentally harmless foam formulation is challenging. Therefore, foam characterisation requires a complex approach: several tests are to be performed throughout the formulation. Our study primarily aims to investigate the quality attributes of propellant-free foam-forming additives. Throughout the research, we focused on acquiring knowledge about the properties of pharmaceutical excipients suitable for foam formulations and their effect on foam characteristics. Not only were the relative foam density, actuated foam weight and the foam collapse tendencies studied, but also the initial liquid properties. Along with surface tension determination, bubble-forming experiments were carried out. The bubble size and rate of formation, standardised by using a texture analyser, were followed by image analysis. Analysing the bubble-forming properties of dilute surfactant solutions allows assumptions on the properties of foam formed from the more concentrated solutions. The size and number of bubbles in the produced foams are related to the kinetics of single bubble formation. For comparison, commercially available medicated foams were studied.

Fate of Chloromethanes in the Atmospheric Environment: Implications for Human Health, Ozone Formation and Depletion, and Global Warming Impacts

Among the halogenated hydrocarbons, chloromethanes (i.e., methyl chloride, CH₃Cl; methylene chloride, CH₂Cl₂; chloroform, CHCl₃; and carbon tetrachloride, CCl₄) play a vital role due to their extensive uses as solvents and chemical intermediates. This article aims to review their main chemical/physical properties and commercial/industrial uses, as well as the environment and health hazards posed by them and their toxic decomposition products. The environmental properties (including atmospheric lifetime, radiative efficiency, ozone depletion potential, global warming potential, photochemical ozone creation potential, and surface mixing ratio) of these chlorinated methanes are also reviewed. In addition, this paper further discusses their atmospheric fates and human health implications because they are apt to reside in the lower atmosphere when released into the environment. According to the atmospheric degradation mechanism, their toxic degradation products in the troposphere include hydrogen chloride (HCl), carbon monoxide (CO), chlorine (Cl₂), formyl chloride (HCOCl), carbonyl chloride (COCl₂), and hydrogen peroxide (H₂O₂). Among them, COCl₂ (also called phosgene) is a powerful irritating gas, which is easily hydrolyzed or thermally decomposed to form hydrogen chloride.

Liquefied gas electrolytes for electrochemical energy storage devices

Electrochemical capacitors and lithium-ion batteries have seen little change in their electrolyte chemistry since their commercialization, which has limited improvements in device performance. Combining superior physical and chemical properties and a high dielectric-fluidity factor, the use of electrolytes based on solvent systems that exclusively use components that are typically gaseous under standard conditions show a wide potential window of stability and excellent performance over an extended temperature range. Electrochemical capacitors using difluoromethane show outstanding performance from –78° to +65°C, with an increased operation voltage. The use of fluoromethane shows a high coulombic efficiency of ~97% for cycling lithium metal anodes, together with good cyclability of a 4-volt lithium cobalt oxide cathode and operation as low as –60°C, with excellent capacity retention.

Vapor Liquid Equilibria of Hydrofluorocarbons Using Dispersion-Corrected and Nonlocal Density Functionals

Recent developments in dispersion corrected and nonlocal density functionals are aimed at accurately capturing dispersion interactions, a key shortcoming of local and semilocal approximations of density functional theory. These functionals have shown significant promise for dimers and small clusters of molecules as well as crystalline materials. However, their efficacy for predicting vapor liquid equilibria is largely unexplored. In this work, we examine the accuracy of dispersion-corrected and nonlocal van der Waals functionals by computing the vapor liquid coexistence curves (VLCCs) of hydrofluoromethanes. Our results indicate that the PBE-D3 functional performs significantly better in predicting saturated liquid densities than the rVV10 functional. With the PBE-D3 functional, we also find that as the number of fluorine atoms increase in the molecule, the accuracy of saturated liquid density prediction improves as well. All the functionals significantly underpredict the saturated vapor densities, which also result in an underprediction of saturated vapor pressure of all compounds. Despite the differences in the bulk liquid densities, the local microstructures of the liquid CFH3 and CF2H2 are relatively insensitive to the density functional employed. For CF3H, however, rVV10 predicts slightly more structured liquid than the PBE-D3 functional.

Comparative assessment of the environmental hazards of and exposure to perfluoroalkyl phosphonic and phosphinic acids (PFPAs and PFPiAs): Current knowledge, gaps, challenges and research needs

Perfluoroalkyl phosphonic and phosphinic acids (PFPAs and PFPiAs) are sub-groups of per- and polyfluoroalkyl substances (PFASs) that have been commercialized since the 1970s, particularly as defoamers in pesticide formulations and wetting agents in consumer products. Recently, C4/C4 PFPiA and its derivatives have been presented as alternatives to long-chain PFASs in certain applications. In this study, we systematically assess the publicly available information on the hazardous properties, occurrence, and exposure routes of PFPAs and PFPiAs, and make comparisons to the corresponding properties of their better-known carboxylic and sulfonic acid analogs (i.e. PFCAs and PFSAs). This comparative assessment indicates that [i] PFPAs likely have high persistence and long-range transport potential; [ii] PFPiAs may transform to PFPAs (and possibly PFCAs) in the environment and biota; [iii] certain PFPAs and PFPiAs can only be slowly eliminated from rainbow trout and rats, similarly to long-chain PFCAs and PFSAs; [iv] PFPAs and PFPiAs have modes-of-action that are both similar to, and different from, those of PFCAs and PFSAs; and [v] the measured levels of PFPAs/PFPiAs in the global environment and biota appear to be low in comparison to PFCAs and PFSAs, suggesting, for the time being, low risks from PFPAs and PFPiAs alone. Although risks from individual PFPAs/PFPiAs are currently low, their ongoing production and use and high persistence will lead to increasing exposure and risks over time. Furthermore, simultaneous exposure to PFPAs, PFPiAs and other PFASs may result in additive effects necessitating cumulative risk assessments. To facilitate effective future research, we highlight possible strategies to overcome sampling and analytical challenges.

Experimental research on the thermal decomposition of pentafluoroethane (HFC-125) extinguishing agent with n-heptane/air pool fire in confined space

We studied the thermal decomposition of pentafluoroethane (HFC-125) with the flame in confined space and the thermolysis gaseous products are hydrogen fluoride (HF) and other organic gases, such as CF₃CHCF₂, CF₃CH₂CF₃, and so on.

Processing follows function: pushing the formation of self-assembled monolayers to high-throughput compatible time scales

Self-assembled monolayers (SAMs) of organic molecules can be used to tune interface energetics and thereby improve charge carrier injection at metal-semiconductor contacts. We investigate the compatibility of SAM formation with high-throughput processing techniques. Therefore, we examine the quality of SAMs, in terms of work function shift and chemical composition as measured with photoelectron and infrared spectroscopy and in dependency on molecular exposure during SAM formation. The functionality of the SAMs is determined by the performance increase of organic field-effect transistors upon SAM treatment of the source/drain contacts. This combined analytical and device-based approach enables us to minimize the necessary formation times via an optimization of the deposition conditions. Our findings demonstrate that SAMs composed of partially fluorinated alkanethiols can be prepared in ambient atmosphere from ethanol solution using immersion times as short as 5 s and still exhibit almost full charge injection functionality if process parameters are chosen carefully. This renders solution-processed SAMs compatible with high-throughput solution-based deposition techniques.

Emissions of fine particle fluoride from biomass burning

The burning of biomasses releases fluorine to the atmosphere, representing a major and previously uncharacterized flux of this atmospheric pollutant. Emissions of fine particle (PM2.5) water-soluble fluoride (F-) from biomass burning were evaluated during the fourth Fire Laboratory at Missoula Experiment (FLAME-IV) using scanning electron microscopy energy dispersive X-ray spectroscopy (SEM-EDX) and ion chromatography with conductivity detection. F- was detected in 100% of the PM2.5 emissions from conifers (n=11), 94% of emissions from agricultural residues (n=16), and 36% of the grasses and other perennial plants (n=14). When F- was quantified, it accounted for an average (±standard error) of 0.13±0.02% of PM2.5. F- was not detected in remaining samples (n=15) collected from peat burning, shredded tire combustion, and cook-stove emissions. Emission factors (EF) of F- emitted per kilogram of biomass burned correlated with emissions of PM2.5 and combustion efficiency, and also varied with the type of biomass burned and the geographic location where it was harvested. Based on recent evaluations of global biomass burning, we estimate that biomass burning releases 76 Gg F- yr(-1) to the atmosphere, with upper and lower bounds of 40-150 Gg F- yr(-1). The estimated F- flux from biomass burning is comparable to total fluorine emissions from coal combustion plus other anthropogenic sources. These data demonstrate that biomass burning represents a major source of fluorine to the atmosphere in the form of fine particles, which have potential to undergo long-range transport.

Global emission inventories for C4-C14 perfluoroalkyl carboxylic acid (PFCA) homologues from 1951 to 2030, part II: the remaining pieces of the puzzle

We identify eleven emission sources of perfluoroalkyl carboxylic acids (PFCAs) that have not been discussed in the past. These sources can be divided into three groups: [i] PFCAs released as ingredients or impurities, e.g., historical and current use of perfluorobutanoic acid (PFBA), perfluorohexanoic acid (PFHxA) and their derivatives; [ii] PFCAs formed as degradation products, e.g., atmospheric degradation of some hydrofluorocarbons (HFCs) and hydrofluoroethers (HFEs); and [iii] sources from which PFCAs are released as both impurities and degradation products, e.g., historical and current use of perfluorobutane sulfonyl fluoride (PBSF)- and perfluorohexane sulfonyl fluoride (PHxSF)-based products. Available information confirms that these sources were active in the past or are still active today, but due to a lack of information, it is not yet possible to quantify emissions from these sources. However, our review of the available information on these sources shows that some of the sources may have been significant in the past (e.g., the historical use of PFBA-, PFHxA-, PBSF- and PHxSF-based products), whereas others can be significant in the long-term (e.g., (bio)degradation of various side-chain fluorinated polymers where PFCA precursors are chemically bound to the backbone). In addition, we summarize critical knowledge and data gaps regarding these sources as a basis for future research.

Efficacy and safety of eco-friendly inhalers: focus on combination ipratropium bromide and albuterol in chronic obstructive pulmonary disease

Background

Chronic obstructive pulmonary disease (COPD) is a major cause of morbidity and mortality and its treatment is critical to improve quality of life, reduce symptoms, and diminish the frequency of COPD exacerbations. Due to the harmful environmental effects of pressurized metered-dose inhalers (pMDIs) containing chlorofluorocarbons (CFCs), newer systems for delivering respiratory medications have been developed.

Methods

A search of the literature in the PubMed database was undertaken using the keywords “COPD,” “albuterol,” “ipratropium bromide,” and “Respimat® Soft Mist Inhaler™”; pertinent references within the identified citations were included. The environmental effect of CFC-pMDIs, the invention of the Respimat® Soft Mist Inhaler™ (SMI) (Boehringer Ingelheim, Ingelheim, Germany), and its use to deliver the combination of albuterol and ipratropium bromide for the treatment of COPD were reviewed.

Results

The adverse environmental effects of CFC-pMDIs stimulated the invention of novel delivery systems including the Respimat SMI. This review presents its development, internal mechanism, and use to deliver the combination of albuterol and ipratropium bromide.

Conclusion

CFC-pMDIs contributed to the depletion of the ozone layer and the surge in disorders caused by harmful ultraviolet B radiation. The banning of CFCs spurred the development of novel delivery systems for respiratory medications. The Respimat SMI is an innovative device that produces a vapor of inhalable droplets with reduced velocity and prolonged aerosol duration that enhance deposition within the lower airway and is associated with improved patient satisfaction. Clinical trials have demonstrated that the Respimat SMI can achieve effects equivalent to pMDIs but with lower medication doses. The long-term safety and efficacy remain to be determined. The Respimat SMI delivery device is a novel, efficient, and well-received system for the delivery of aerosolized albuterol and ipratropium bromide to patients with COPD; however, the presence of longer-acting, less frequently dosed respiratory medications provide patients and providers with other therapeutic options.

THEORETICAL STUDY OF MECHANISM FOR THE ATMOSPHERIC REACTION CF3CHFO2 + NO

The mechanism of the reaction CF3CHFO2 + NO was investigated using ab initio and density functional theory (DFT). The optimized geometries for all stationary points on the reaction energy surface were calculated using MP2 and B3LYP methods with the aug-cc-pVDZ basis set. Single-point energy calculations were performed using the coupled cluster method with single, double and perturbative triple configurations, CCSD(T). The most important energy minima on the potential energy surface (PES) were found corresponding to two conformers of the peroxynitrite association adducts, cis- CF3CHFOONO and trans- CF3CHFOONO , and the nitrate, CF3CHFONO2 . The radical pairs ( CF3CHFO + NO2 ) and the nitrate are formed through the breaking of the peroxy bond of trans- CF3CHFOONO and the rearrangement of cis- CF3CHFOONO , respectively. The nitrate can be decomposed to carbonylated species ( CF3CHO or CF3CFO ), nitryl fluoride (NO2F), nitrous acid (HONO), and radical pairs ( CF3CHFO + NO2 ), which are of potential atmospheric importance.

Theoretical study of the kinetics of reactions of the monohalogenated methanes with atomic chlorine

Ab initio calculations at the G2 level were used in a theoretical description of the kinetics and mechanism of the hydrogen abstraction reactions from fluoro-, chloro- and bromomethane by chlorine atoms. The profiles of the potential energy surfaces show that mechanism of the reactions under investigation is complex and consists of two - in the case of CH₃F+Cl - and of three elementary steps for CH₃Cl+Cl and CH₃Br+Cl. The heights of the energy barrier related to the H-abstraction are of 8–10 kJ mol⁻¹, the lowest value corresponds to CH₃Cl+Cl and the highest one to CH₃F+Cl. The rate constants were calculated using the theoretical method based on the RRKM theory and the simplified version of the statistical adiabatic channel model. The kinetic equations derived in this study\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ \begin{array}{*{20}c} {k\left( {\mathrm{C}{{\mathrm{H}}_3}\mathrm{F}+\mathrm{Cl}} \right)=6.75\times 1{0^{-12 }}\times {{{\left( {\mathrm{T}/300} \right)}}^{2.12 }}\times\exp (-900/\mathrm{T})}{\mathrm{c}{{\mathrm{m}}^3}\mathrm{molecul}{{\mathrm{e}}^{-1 }}{{\mathrm{s}}^{-1 }}} \\ {k\left( {\mathrm{C}{{\mathrm{H}}_3}\mathrm{Cl}+\mathrm{Cl}} \right)=6.97\times 1{0^{-12 }}\times {{{\left( {\mathrm{T}/300} \right)}}^{1.73 }}\times\exp (-795/\mathrm{T})}{\mathrm{c}{{\mathrm{m}}^3}\mathrm{molecul}{{\mathrm{e}}^{-1 }}{{\mathrm{s}}^{-1 }}} \\ {k\left( {\mathrm{C}{{\mathrm{H}}_3}\mathrm{Br}+\mathrm{Cl}} \right)=6.26\times 1{0^{-12 }}\times {{{\left( {\mathrm{T}/300} \right)}}^{1.82 }}\times\exp (-795/\mathrm{T})}{\mathrm{c}{{\mathrm{m}}^3}\mathrm{molecul}{{\mathrm{e}}^{-1 }}{{\mathrm{s}}^{-1 }}} \\ \end{array} $$\end{document}and\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ \begin{array}{*{20}c} {k\left( {\mathrm{C}{{\mathrm{H}}_2}\mathrm{F}+\mathrm{HCl}} \right)=2.88\times 1{0^{-13 }}\times {{{\left( {\mathrm{T}/300} \right)}}^{2.02 }}\times\exp (-1255/\mathrm{T})}{\mathrm{c}{{\mathrm{m}}^3}\mathrm{molecul}{{\mathrm{e}}^{-1 }}{{\mathrm{s}}^{-1 }}} \\ {k\left( {\mathrm{C}{{\mathrm{H}}_2}\mathrm{Cl}+\mathrm{HCl}} \right)=2.42\times 1{0^{-13 }}\times {{{\left( {\mathrm{T}/300} \right)}}^{1.57 }}\times\exp (-2100/\mathrm{T})}{\mathrm{c}{{\mathrm{m}}^3}\mathrm{molecul}{{\mathrm{e}}^{-1 }}{{\mathrm{s}}^{-1 }}} \\ {k\left( {\mathrm{C}{{\mathrm{H}}_2}\mathrm{Br}+\mathrm{HCl}} \right)=2.21\times 1{0^{-13 }}\times {{{\left( {\mathrm{T}/300} \right)}}^{1.69 }}\times\exp (-1485/\mathrm{T})}{\mathrm{c}{{\mathrm{m}}^3}\mathrm{molecul}{{\mathrm{e}}^{-1 }}{{\mathrm{s}}^{-1 }}} \\ \end{array} $$\end{document}allow a description of the kinetics of the reactions under investigation in the temperature range of 200–3000 K. The kinetics of reactions of the entirely deuterated reactants were also included in the kinetic analysis. Results of ab initio calculations show that D-abstraction process is related with the energy barrier of 5 kJ mol⁻¹ higher than the H-abstraction from the corresponding non-deuterated reactant molecule. The derived analytical equations for the reactions, CD₃X+Cl, CH₂X+HCl and CD₂X+DCl (X = F, Cl and Br) are a substantial supplement of the kinetic data necessary for the description and modeling of the processes of importance in the atmospheric chemistry.

Computational study on the thermal decomposition and isomerization of the CH3OCF2O• radical

The geometries of the reactant, products, and transition states involved in the decomposition pathways of the CH3OCF2O• radical formed during the photooxidation of CH3OCHF2 (HFE-152a) have been optimized and characterized at the DFT-B3LYP level of theory using the 6–311G(d,p) basis set. Single-point energy calculations have been made at the G2M (CC,MP2) level of theory. Out of the four prominent decomposition channels considered, the β-C–O bond scission is found to be the dominant path involving a barrier height of 9.78 kcal mol–1 (1 cal = 4.184 J). The thermal rate constant for the above decomposition pathway is evaluated using canonical transition state theory (CTST) and was found to be 5.27 × 104 s–1 at 298 K and 1 atm (1 atm = 101.325 kPa).

Vitamin B12 Deficiency due to Chlorofluorocarbon: A Case Report

Background. Vitamin B12 is vital for optimal functioning of various organ systems but more importantly the central nervous system and the hematological system. Deficiency of vitamin B12 clinically manifests as excessive daytime fatigue, memory difficulties, encephalopathy, myelopathy, peripheral neuropathy, and optic neuropathy. In occupational medicine, vitamin B12 deficiency has been reported with exposure to nitrous oxide in health care workers. However, not much is known about exposure to Freons in other industries and vitamin B12 deficiency. Aim. We are reporting a case of vitamin B12 deficiency in the setting of exposure to chlorofluorocarbon (CFC) gases. Case Report. A 55-year-old male refrigerator mechanic experienced recurrent visual symptoms, which included diplopia and blurring. A complete workup was done and was significant of vitamin B12 deficiency. However, his B12 levels were refractory to supplementation. Appropriate precautions at workplace improved patient's symptoms and were associated with significant improvement in B12 levels. Conclusion. To the best of our knowledge, this is the first reported case of vitamin B12 deficiency (that remains refractory to supplementation) in the setting of exposure to Freon gases.

Ecotoxicology of organofluorous compounds

Organofluorous compounds have been developed for myriad purposes in a variety of fields, including manufacturing, industry, agriculture, and medicine. The widespread use and application of these compounds has led to increasing concern about their potential ecological toxicity, particularly because of the stability of the C-F bond, which can result in chemical persistence in the environment. This chapter reviews the chemical properties and ecotoxicology of four groups of organofluorous compounds: fluorinated refrigerants and propellants, per- and polyfluorinated compounds (PFCs), fluorinated pesticides, and fluoroquinolone antibiotics. These groups vary in their environmental fate and partitioning, but each raises concern in terms of ecological risk on both the regional and global scale, particularly those compounds with long environmental half-lives. Further research on the occurrence and toxicities of many of these compounds is needed for a more comprehensive understanding of their ecological effects.

Reproductive and developmental toxicity of hydrofluorocarbons used as refrigerants

The present paper summarizes data on the reproductive and developmental toxicity of hydrofluorocarbons (HFCs), including pentafluoroethane (HFC-125), 1,1,1,2-tetrafluoroethane (HFC-134a), 1,1,1-trifluoroethane (HFC-143a), 1,1-difluoroethane (HFC-152a), difluoromethane (HFC-32) and 1,1,1,3,3-pentafluoropropane (HFC-245fa), used as refrigerants, published in openly available scientific literature. No developmental toxicity of HFC-125 was found even at 50,000 ppm in rats or rabbits. Although HFC-134a exhibited no dominant lethal effect or reproductive toxicity in rats, it caused low body weight in pre- and postnatal offspring and slightly retarded skeletal ossification in fetuses at 50,000 ppm in rats. No maternal or developmental toxicity was noted after exposure to HFC-143a even at 40,000 ppm in rats or rabbits or HFC-152a even at 50,000 ppm in rats. HFC-32 is slightly maternally and developmentally toxic at 50,000 ppm in rats, but not in rabbits. HFC-245fa caused decreases in maternal body weight and food consumption at 10,000 and 50,000 ppm and fetal weight at 50 000ppm. No evidence of teratogenicity for these HFCs was noted in rats or rabbits. There is limited information about the reproductive toxicity of these HFCs. Animal studies remain necessary for risk assessments of chemicals because it is difficult to find alternative methods to determine the toxic effects of chemicals. It is required to reduce emissions of organic vapors containing HFCs to reduce the risk of exposure.

Cardiotoxicity of Freon among refrigeration services workers: comparative cross-sectional study

BACKGROUND

Freon includes a number of gaseous, colorless chlorofluorocarbons. Although freon is generally considered to be a fluorocarbon of relatively low toxicity; significantly detrimental effects may occur upon over exposure. The purpose of the present study is to investigate whether occupational exposure to fluorocarbons can induce arterial hypertension, myocardial ischemia, cardiac arrhythmias, elevated levels of plasma lipids and renal dysfunction.

METHODS

This comparative cross-sectional study was conducted at the cardiology clinic of the Suez Canal Authority Hospital (Egypt). The study included 23 apparently healthy male workers at the refrigeration services workshop who were exposed to fluorocarbons (FC 12 and FC 22) and 23 likewise apparently healthy male workers (unexposed), the control group. All the participants were interviewed using a pre-composed questionnaire and were subjected to a clinical examination and relevant laboratory investigations.

RESULTS

There were no significant statistical differences between the groups studied regarding symptoms suggesting arterial hypertension and renal affection, although a significantly higher percentage of the studied refrigeration services workers had symptoms of arrhythmias. None of the workers had symptoms suggesting coronary artery disease. Clinical examination revealed that the refrigeration services workers had a significantly higher mean pulse rate compared to the controls, though no significant statistical differences were found in arterial blood pressure measurements between the two study groups. Exercise stress testing of the workers studied revealed normal heart reaction to the increased need for oxygen, while sinus tachycardia was detected in all the participants. The results of Holter monitoring revealed significant differences within subject and group regarding the number of abnormal beats detected throughout the day of monitoring (p < 0.001). There were no significant differences detected in the average heart rate during the monitoring period within subject or group. Most laboratory investigations revealed absence of significant statistical differences for lipid profile markers, serum electrolyte levels and glomerular lesion markers between the groups except for cholesterol and urinary beta2-microglobulin (tubular lesion markers) levels which were significantly elevated in freon exposed workers.

CONCLUSIONS

Unprotected occupational exposure to chlorofluorocarbons can induce cardiotoxicity in the form of cardiac arrhythmias. The role of chlorofluorocarbons in inducing arterial hypertension and coronary artery diseases is unclear, although significantly elevated serum cholesterol and urinary beta2-microglobulin levels raise a concern.

Environmental hazards and health risk of common liquid perfluoro-n-alkanes, potent greenhouse gases

This article aimed at introducing the main physical properties and commercial/industrial uses of common liquid perfluoro-n-alkanes (including perfluoropentane, perfluorohexane, perfluoroheptane, perfluorooctane, and perfluorononane) and the environment and health hazards posed by their toxic decomposition products (especially in hydrogen fluoride and perfluoroisobutylene) because these perfluorocompounds are potent greenhouse gases, which have been blanketed into the Kyoto Protocol, but was rarely described in the National Inventory Reports by Annex I Parties. The environmental properties (including octanol-water partition coefficient, water solubility and Henry's law constant) of liquid perfluoro-n-alkanes were evaluated, and further discussed were its atmospheric implications according to the predicted properties and possible proposal for the formation of trifluoroacetic acid (CF(3)COOH) in the atmosphere by the ionized photolysis. These predicted values revealed that liquid perfluoro-n-alkanes tend to be hydrophobic and partitioned into organic matter, and they have exceptionally low solubility in water and extremely high vaporization from the water bodies, suggesting that it will sink into the atmosphere if it is released into the environment.