Analytical model for site-specific isotope fractionation in 13C during sorption: determination by isotopic 13C NMR spectrometry with vanillin as model compound

Position-specific isotope effects during alkaline hydrolysis of 2,4-dinitroanisole resolved by compound-specific isotope analysis, 13C NMR, and density-functional theory

Compound-specific isotope analysis (CSIA), position-specific isotope analysis (PSIA), and computational modeling (e.g., quantum mechanical models; reactive-transport models) are increasingly being used to monitor and predict biotic and abiotic transformations of organic contaminants in the field. However, identifying the isotope effect(s) associated with a specific transformation remains challenging in many cases. Here, we describe and interpret the position-specific isotope effects of C and N associated with a S_N2Ar reaction mechanism by a combination of CSIA and PSIA using quantitative ¹³C nuclear magnetic resonance spectrometry, and density-functional theory, using 2,4-dinitroanisole (DNAN) as a model compound. The position-specific ¹³C enrichment factor of O-C₁ bond at the methoxy group attachment site (ε_C1) was found to be approximately -41‰, a diagnostic value for transformation of DNAN to its reaction products 2,4-dinitrophenol and methanol. Theoretical kinetic isotope effects calculated for DNAN isotopologues agreed well with the position-specific isotope effects measured by CSIA and PSIA. This combination of measurements and theoretical predictions demonstrates a useful tool for evaluating degradation efficiencies and/or mechanisms of organic contaminants and may promote new and improved applications of isotope analysis in laboratory and field investigations.

Intramolecular non-covalent isotope effects at natural abundance associated with the migration of paracetamol in solid matrices during liquid chromatography

Position-specific isotope analysis by Nuclear Magnetic Resonance spectrometry was employed to study the ¹³C intramolecular isotopic fractionation associated with the migration of organic substrates through different stationary phases chromatography columns. Liquid chromatography is often used to isolate compounds prior to their isotope analysis and this purification step potentially alters the isotopic composition of target compounds introducing a bias in the later measured data. Moreover, results from liquid chromatography can yield the sorption parameters needed in reactive transport models that predict the transport and fate of organic contaminants to in the environment. The aim of this study was to use intramolecular isotope analysis to study both ¹³C and ¹⁵N isotope effects associated with the elution of paracetamol (acetaminophen) through different stationary phases and to compare them to effects observed previously for vanillin. Results showed very different intramolecular isotope fractionation profiles depending on the chemical structure of the stationary phase. The data also demonstrate that both the amplitude and the distribution of measured isotope effects depend on the nature of the non-covalent interactions involved in the migration process. Results provided by theoretical calculation performed during this study also confirmed the direct link between observed intramolecular isotope fractionation and the nature of involved intermolecular interactions. It is concluded that the nature of the stationary phase through which the substrate passes has a major impact on the intramolecular isotopic composition of organic compounds isolated by chromatography methods..

Potential for co-metabolic oxidation of TCE and evidence for its occurrence in a large-scale aquifer survey

Trichloroethylene (TCE) is a groundwater pollutant that is prevalent worldwide. In contaminated groundwater, TCE can be biodegraded following either reductive dechlorination or aerobic co-metabolic oxidation. However, since the co-metabolic process is not accompanied by indicative and easily detectable transformation products, little is known about its prominence in the environment. To estimate the environmental importance of the oxidative process, a regional groundwater survey was conducted. In this survey, polluted water from 100 wells along the Israeli Coastal Aquifer was sampled. Geochemical data indicated oxic conditions prevailing in most sites. The sampled groundwater was used for microcosm experiments, functional gene analysis, and TCE compound-specific isotope analysis (δ¹³C and δ³⁷Cl). Enrichments of methane and toluene oxidizers in microcosms indicated the high potential of the indigenous microbial community to co-metabolically oxidize TCE. This was further reinforced by the high abundance of mmoX and PHE functional genes quantified in some of the sites (yet lower abundance of TOD functional gene was found). Finally, compound-specific isotope analysis was used to assess the magnitude of TCE oxidation in practice. Applying the isotopic tool for scattered points on a regional scale demanded the consideration of a wide δ¹³C range of source TCE, hampering the ability to detect small shifts of a single permil. Thus, despite the high potential for the oxidation process, no evidence was attained for the natural occurrence of the process, and significant isotopic shifts were restricted to actively treated sites only. This limitation should be considered in future regional scale studies, in which no single source is defined.

The new face of isotopic NMR at natural abundance

The most widely used method for isotope analysis at natural abundance is isotope ratio monitoring by Mass Spectrometry (irm-MS) which provides bulk isotopic composition in ² H, ¹³ C, ¹⁵ N, ¹⁸ O or ³⁴ S. However, in the 1980s, the direct access to Site-specific Natural Isotope Fractionation by Nuclear Magnetic Resonance (SNIF-NMR^TM ) was immediately recognized as a powerful technique to authenticate the origin of natural or synthetic products. The initial - and still most popular - application consisted in detecting the chaptalization of wines by irm-² H NMR. The approach has been extended to a wide range of methodologies over the last decade, paving the way to a wide range of applications, not only in the field of authentication but also to study metabolism. In particular, the emerging irm-¹³ C NMR approach delivers direct access to position-specific ¹³ C isotope content at natural abundance. After highlighting the application scope of irm-NMR (² H and ¹³ C), this article describes the major improvements which made possible to reach the required accuracy of 1‰ (0.1%) in irm-¹³ C NMR. The last part of the manuscript summarizes the different steps to perform isotope analysis as a function of the sample properties (concentration, peak overlap) and the kind of targeted isotopic information (authentication, affiliation). Copyright © 2016 John Wiley & Sons, Ltd.

Fractionation in position-specific isotope composition during vaporization of environmental pollutants measured with isotope ratio monitoring by ¹³C nuclear magnetic resonance spectrometry

Isotopic fractionation of pollutants in terrestrial or aqueous environments is a well-recognized means by which to track different processes during remediation. As a complement to the common practice of measuring the change in isotope ratio for the whole molecule using isotope ratio monitoring by mass spectrometry (irm-MS), position-specific isotope analysis (PSIA) can provide further information that can be exploited to investigate source and remediation of soil and water pollutants. Position-specific fractionation originates from either degradative or partitioning processes. We show that isotope ratio monitoring by (13)C NMR (irm-(13)C NMR) spectrometry can be effectively applied to methyl tert-butylether, toluene, ethanol and trichloroethene to obtain this position-specific data for partitioning. It is found that each compound exhibits characteristic position-specific isotope fractionation patterns, and that these are modulated by the type of evaporative process occurring. Such data should help refine models of how remediation is taking place, hence back-tracking to identify pollutant sources.

Internal Referencing for ¹³C Position-Specific Isotope Analysis Measured by NMR Spectrometry

The intramolecular (13)C composition of a molecule retains evidence relevant to its (bio)synthetic history and can provide valuable information in numerous fields ranging from biochemistry to environmental sciences. Isotope ratio monitoring by (13)C NMR spectrometry (irm-(13)C NMR) is a generic method that offers the potential to conduct (13)C position-specific isotope analysis with a precision better than 1‰. Until now, determining absolute values also required measurement of the global (or bulk) (13)C composition (δ(13)Cg) by mass spectrometry. In a radical new approach, it is shown that an internal isotopic chemical reference for irm-(13)C NMR can be used instead. The strategy uses (1)H NMR to quantify both the number of moles of the reference and of the studied compound present in the NMR tube. Thus, the sample preparation protocol is greatly simplified, bypassing the previous requirement for precise purity and mass determination. The key to accurate results is suppressing the effect of radiation damping in (1)H NMR which produces signal distortion and alters quantification. The methodology, applied to vanillin with dimethylsulfone as an internal standard, has an equivalent accuracy (<1‰) to that of the conventional approach. Hence, it was possible to clearly identify vanillin from different origins based on the (13)C isotopic profiles.