Perfluorinated compounds in sediment samples from the wastewater canal of Pančevo (Serbia) industrial area

Evaluation of the research trends on perfluorinated compounds using bibliometric analysis: knowledge gap and future perspectives

Detection of perfluorinated compounds (PFCs) in the environment has been a global concern because of the risk they pose due to their endocrine-disruptive properties. This study analyzed the global trends and research productivity of PFCs from 1990 to 2021. A total number of 3256 articles on PFCs were retrieved from the Web of Science focusing on different environmental and biological matrices. An increase in the productivity of research on PFCs was observed during the survey period which indicates that more research and publications on this class of contaminants are expected in the future. Evaluating the most productive countries and the number of citations per country on PFCs research shows that China and the United States of America were ranked in first and second places. It was also observed that research on PFCs received the most attention from scientists in developed countries, with little research emerging from Africa. Hence, research on PFCs in developing countries, especially low-income countries should be promoted. Consequently, more research programs should be implemented to investigate PFCs in countries and regions where research on these contaminants is low. The study will help researchers, government agencies and policymakers to tailor future research, allocation of funds to PFCs research and countries' collaboration.

The role of dissolved organic matter during Per- and Polyfluorinated Substance (PFAS) adsorption, degradation, and plant uptake: A review

The negative effects of polyfluoroalkyl substances (PFAS) on the environment and health have recently attracted much attention. This article reviews the influence of soil- and water-derived dissolved organic matter (DOM) on the environmental fate of PFAS. In addition to being co-adsorped with PFAS to increase the adsorption capacity, DOM competes with PFAS for adsorption sites on the surface of the material, thereby reducing the removal rate of PFAS or increasing water solubility, which facilitates desorption of PFAS in the soil. It can quench some active species and inhibit the degradation of PFAS. In contrast, before DOM in water self-degrades, DOM has a greater promoting effect on the degradation of PFAS because DOM can complex with iron, iodine, among others, and act as an electron shuttle to enhance electron transfer. In soil aggregates, DOM can prevent microorganisms from being poisoned by direct exposure to PFAS. In addition, DOM increases the desorption of PFAS in plant root soil, affecting its bioavailability. In general, DOM plays a bidirectional role in adsorption, degradation, and plant uptake of PFAS, which depends on the types and functional groups of DOM. It is necessary to enhance the positive role of DOM in reducing the environmental risks posed by PFAS. In future, attention should be paid to the DOM-induced reduction of PFAS and development of a green and efficient continuous defluorination technology.

Contamination profiles and risk assessment of per- and polyfluoroalkyl substances in groundwater in China

Per- and polyfluoroalkyl substances (PFASs) have attracted attention due to the potential risk they pose to ecosystems and human health. A total of 169 groundwater samples were collected from four representative regions in order to analyze PFASs concentrations in China. The total concentration of PFASs (∑PFASs) in groundwater ranged from 0.05 to 198.80 ng L^-1, with an average of 3.97 ng L^-1. All targeted PFASs were detected in the studied areas. The detection frequency and average concentration of perfluorooctanoic acid (PFOA) were the highest (79.29% and 1.61 ng L^-1, respectively). The contamination profiles of PFASs in each study area varied due to natural geographical conditions and human activities. According to the results of the potential source identification, the point sources of perfluorooctane sulfonate (PFOS) were mainly concentrated in Lanzhou, and the distribution of PFASs was slightly affected by atmospheric deposition in all the studied areas. The obtained concentrations of PFOA and PFOS may pose no threat to the residents due to water consumption.

Contamination Profiles of Perfluoroalkyl Substances (PFAS) in Groundwater in the Alluvial-Pluvial Plain of Hutuo River, China

Over the past decade, concerns about perfluoroalkyl substances (PFAS) have increased rapidly among the scientific community due to their global distribution and persistence in various environmental matrices. The occurrences of 10 PFAS in groundwater in the alluvial-pluvial plain of Hutuo River (APPHR) in the North China Plain (NCP) were analyzed via UPLC-MS/MS and solid phase extraction. Total PFAS concentrations ranged from 0.56 ng/L to 13.34 ng/L, with an average value of 2.35 ng/L. Perfluorooctanoic acid (PFOA) and perfluorohexanoic acid (PFHxA) were dominant PFAS contaminants with high detection rates of 98.39% and 95.16%, respectively, and PFOA was the main pollutant with a mean concentration of 0.65 ng/L. The hydrogeological conditions have an important influence on the concentrations of PFAS in groundwater. Comparatively, the concentration of PFAS in groundwater in the study area is not very high, but it reflects that the groundwater in this region is affected by industrial sources to some extent. Local government should pay more attention on industrial pollution control and groundwater protection in this area.

The socio-economic impact timeline in Serbia for persistent organic pollutants (POPs)

Assessing the socio-economic impact of dangerous chemicals, including persistent organic pollutants (POPs) as a specific segment, includes analysis of their impacts on human health, on the environment and on local economic development. Abundant evidence of these effects of dangerous chemicals throughout the world is provided by published research. According to WHO, these chemicals cause around 4.9 million deaths (8.3%) and 86 million Disability-Adjusted Life Years (5.7%) globally; according to very conservative estimates, 20% of cancer deaths are the consequence of the cancerous effects of chemicals in the work place. Their impact on economic development is manifested primarily through reduced productivity of society due to health impairment of both the population and natural resources. Specific research, the results of which are presented in this article, has been focused on the impact of POPs on human health. This impact is presented in very general terms through estimation of the monetized cost effects for treating those diseases and cancers assumed to be caused by POPs in Serbia. The cost estimation based on available data amounts to approximately € 68 million for a 5-year period.

Pollution and Health Risk Assessments of Potentially Toxic Elements in Soil and Sediment Samples in a Petrochemical Industry and Surrounding Area

The pollution state and health risk assessment of potentially toxic elements (PTE) in soil and sediment samples of the petrochemical industry and its surrounding area are evaluated in this study. The pseudo-total contents of Ba, Cd, Co, Cu, Cr, Mn, Ni, Pb, V, Zn, As, Hg, and Se were measured by inductively coupled plasma–optical emission spectrometry (ICP/OES) in analyzed samples. Instead of determining total content, we performed aqua regia of the samples. The silicate matrix remained, and the quantities of elements that are within the silicate matrix do not represent an environmental danger. The soils from the chlor–alkali plant are highly polluted by Hg (the enrichment factor values were above 6000), and by Cu, Cd, Pb, and Zn, while the sediment samples from the wastewater channel are polluted with Cr, Cd, and Hg. The measured element contents are used for calculating health risk criteria for a composite worker (a worker who is exposed, long-term, during the work day) and for residential people. Hg is the element that mainly contributes to non-carcinogenic risks within the petrochemical area. The highest value of total carcinogenic risk obtained in the sediment sample from the wastewater channel, and the metal that mostly contributes is Cr. The areas closest to the petrochemical industry have higher values of health risk criteria parameters and pollution indices. The areas that are located further to the north and south from the petrochemical industry are less burdened with the analyzed elements, which is significant because the closest city and village are situated in those directions.

Emerging contaminants in sediment core from the Iron Gate I Reservoir on the Danube River

The Iron Gate I Reservoir is the largest impoundment on the Danube River. It retains >50% of the incoming total suspended solids load and the associated organic contaminants. In the sediment core of the Iron Gate I Reservoir we report the presence and fate of four classes of emerging contaminants (pharmaceuticals, pesticides, steroids and perfluorinated compounds), predominantly not covered by the EU monitoring programs, but considered as future candidates. Based on contaminant's partitioning behavior in the water/sediment system and the suspected ecotoxicological potential asserted from the literature data, the risk of recorded concentrations for sediment-dwelling organisms was discussed. The high anticipated risk was associated with antibiotics sulfamethoxazole and erythromycin, and pesticides linuron and carbendazim (banned in the EU, but still approved for use in the investigated area) and malathion. This indicated the need for better control of release of these compounds into the river, and implied their inclusion in future regular monitoring. Higher concentrations of pharmaceuticals and most pesticides and sterols were recorded in the fragment of allochthonous coarser sediment, assumed to have entered the reservoir during a high discharge event. Only one perfluorinated compound was recorded in the upper part of the sediment core. The vertical concentration profiles of pesticides propazine and malathion indicated their uniform source, most likely atmospheric transport and deposition of particles deriving from agricultural land.

Occurrence, distribution and behavior of emerging persistent organic pollutants (POPs) in a Mediterranean wetland protected area

The analysis of perfluoroalkyl substances (PFASs) and organophosphate flame retardants (PFRs) in the different environmental compartments of a characteristic coastal wetland, the Albufera Natural Park (Valencia, Spain), is required for understanding the transport, accumulation and fate of these pollutants in an area under high anthropogenic pressure. Samples included 13 wastewater treatment plant influents, 13 effluents, 12 surface water, 19 sediment samples and 10 fish individuals from the Albufera Natural Park and the surrounding area. Tris(2-chloroisopropyl) phosphate (TCIPP) and perfluorooctane sulfonate (PFOS) were at the highest concentrations in water, 330.2 ng L^-1 and 47.8 ng L^-1, respectively. In fish and sediment PFOS was also the most detected while perfluorooctanoic acid (PFOA) was in all types of water. Higher levels of target compounds (mainly PFASs) in wastewater effluents compared to influent suggested both, formation from precursors during treatment and poor removal efficiency. Mean levels of PFOS in water and fish were higher than the environmental quality standards (EQS) established by the European Union Directive 2013/39/EU. The influence of the metropolitan area of Valencia and its surrounding industrial belt could explain the significantly higher levels reported in the northern part (influenced by the Turia River).

Defluorination of perfluoroalkyl acids is followed by production of monofluorinated fatty acids

We investigated the capability of microorganisms isolated from environments polluted with perfluoroalkyl acids (PFAAs) to conduct biotransformation of these emerging pollutants. Two different microbial consortia (chemoorganoheterotrophic bacteria and total yeast and molds) were isolated from two river sediments in Saitama and Osaka, Japan, known for long term pollution with perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA). The microbial consortia were incubated in the presence of added PFOS and PFOA, and decreases in concentrations of these compounds were between 46-69% and 16-36%, respectively. Decreases in concentrations were, in part, due to sorption on biomass, but defluorinated PFOS and PFOA products were not detected. However, untargeted analysis suggested the presence of several metabolites found only in samples from consortia with PFOS and PFOA but not in the control samples. Molecular formula candidates were narrowed down to two options, C₁₈H₂₈O₅F and C₂₁H₂₇O₄. It was assumed that these formulas were associated with unsaturated monofluorinated fatty acids and hydrocarbons with multiple unsaturated bonds or ring structures.

Risk exposure assessment of per- and polyfluoroalkyl substances (PFASs) in drinking water and atmosphere in central eastern China

We examined per- and polyfluoroalkyl substances (PFASs) in air from eight cities, and in water from six drinking-water treatment plants (DWTPs), in central eastern China. We analyzed raw and treated water samples from the DWTPs for 17 ionic PFASs with high-performance liquid chromatography/negative-electrospray-ionization tandem mass spectrometry (HPLC/(-)ESI-MS/MS), and analyzed the gas and particle phases of atmospheric samples for 12 neutral PFASs by gas chromatography-mass spectrometry (GC-MS). Perfluorooctanoic acid (PFOA) and perfluorohexanoic acid (PFHxA) were the dominant compounds in drinking water, and fluorotelomer alcohols (FTOHs) dominated in atmospheric samples. Of all the compounds in the treated water samples, the concentration of PFOA, at 51.0 ng L^-1, was the highest. Conventional treatments such as coagulation (COA), flocculation (FOC), sedimentation (SED), and sand filtration (SAF) did not remove PFASs. Advanced treatments, however, including ultrafiltration (UF) and activated carbon (AC), removed the majority of PFASs except for shorter-chain PFASs such as perfluorobutanoic acid (PFBA) and perfluoropentanoic acid (PFPA). We also investigated human exposure to PFASs via drinking water and the atmosphere and found that the mean daily intake of PFASs was 0.43 ng kg^-1 day^-1.

Side-chain fluorinated polymer surfactants in aquatic sediment and biosolid-augmented agricultural soil from the Great Lakes basin of North America

Side-chain fluorinated polymer surfactants are the main components of fabric protector sprays and used extensively on furniture and textiles. The composition of these commercial protector products has changed, but there is currently a total dearth of information on these novel fluorinated polymers in the environment. Using a developed analytical approach, two complementary studies examined the distribution of Scotchgard™ fabric protector components in aquatic sediment and in agricultural soils where wastewater treatment plant (WWTP) sourced biosolid application occurred, and in samples from sites in the Laurentian Great Lakes basin of North America. The main components in the pre- and post-2002 Scotchgard™ fabric protectors were identified by MS/MS and Q-TOF-MS to contain a perfluorooctane sulfonamide (S1) and perfluorobutane sulfonamide (S2) based side-chain, respectively, and bonded to a polymer backbone. In fifteen sediment samples collected in 2012-2013 from western Lake Erie and Saginaw Bay (Lake Huron), S1 was in all sediment samples (0.18 to 461.59ng/g dry weight (d.w.)); S2 was in 80% of the sediment samples (<0.03 to 24.08ng/g d.w.). Thirteen soil samples were collected (2015) from a biosolid applied and two non-biosolid applied farm field sites in southern Ontario (Canada). S1 was detected in 100% of the soil samples from biosolid-augmented agricultural sites (mean 236.36ng/g d.w.; range 41.87 to 622.46ng/g d.w.), and at concentrations much greater than in the aquatic sediment samples. The concentration of S1 and S2 in soil and sediment samples were also much greater than the total concentration of other per-and poly-fluoroalkyl substances (PFASs) that were measured. The ratio of S1 concentration versus ∑₂₂PFAS concentration was up to 1616 in sediment samples from Lake Erie. This results helps to explain why known PFASs account for low percentages of the total extractable organic fluorine (EOF) content in sediment.

Brachybacterium sp. CH-KOV3 isolated from an oil-polluted environment-a new producer of levan

Various microorganisms isolated from polluted environments, such as Pseudomonas sp. and Micrococcus sp. can synthesize exopolysaccharides (EPSs) which are natural, non-toxic and biodegradable polymers. EPSs play a key role in protection of microbial cells under various external influences. For humans, these substances have potential use in many industries. EPSs can be applied as a flavor or a fragrance carrier, an emulsifier, a stabilizer, a prebiotic, an antioxidant or an antitumor agent. In this study, we characterized an environmental microorganism that produces EPS, optimized EPS production by this strain and characterized the EPS produced. Isolate CH-KOV3 was identified as Brachybacterium paraconglomeratum. The sucrose level in the growth medium greatly influenced EPS production, and the highest yield was when the microorganism was incubated in media with 500g/L of sucrose. The optimal temperature and pH were 28°C and 7.0, respectively. The nuclear magnetic resonance (NMR) results and GC-MS analysis confirmed that the residues were d-fructofuranosyl residues with β-configuration, where fructose units are linked by β-2,6-glycosidic bonds, with β-2,1-linked branches. All these data indicate that the investigated EPS is a levan-type polysaccharide. Thus, it was concluded that Brachybacterium sp. CH-KOV3 could constitute a new source for production of the bioactive polysaccharide, levan.

Perfluoroalkyl acids (PFAAs) in sediments from rivers of the Pearl River Delta, southern China

Having been largely used in industrial and household products, perfluoroalkyl acids (PFAAs) appear in environmental and biological systems with prevalence and persistence and have raised great concern in recent years. The present study is aimed at studying concentrations and composition profiles of 16 PFAAs in surface sediments collected from 51 sampling locations in 4 main rivers of the Pearl River Delta, one of the economy-developed areas in China. The total PFAA concentrations (∑ PFAAs) were determined in a wide range of 1.89-15.1 ng g^-1 dw (dry weight) with an average concentration to be 3.54 ng g^-1 dw. Higher ∑ PFAAs were observed in the downstream of Dongjiang River and the Pearl River, possibly due to the discharge of industrial wastewater. Perfluoropentanoic acid (PFPeA) and perfluorooctane sulfonate (PFOS) were the dominant PFAAs, accounting for 51 to 85% of ∑ PFAAs in 27% of the samples. High PFPeA concentrations in sediments of urban river were scarcely observed in previous studies worldwide. The sources of short-chain perfluoroalkyl carboxylic acids (PFCAs) were significantly different from those of other PFAAs. Preliminary hazard assessment proved negligible for PFOS, perfluorooctanoic acid (PFOA), PFPeA, and perfluorohexanoic acid (PFHxA) concentrations in sediments from rivers of the Pearl River Delta.

Distribution of perfluoroalkyl compounds in Osaka Bay and coastal waters of Western Japan

Perfluoroalkyl acids (PFAAs) including perfluoroalkyl sulfonates (PFSAs) and perfluoroalkyl carboxylates (PFCAs) were analyzed in sediment samples taken from Ajifu Waterway in Osaka city, from Osaka Bay, and from Kagoshima Bay, as well as in fifteen seawater samples collected from Osaka Bay and coastal waters of Western Japan. In all sediment samples, only PFCAs were detected, and the highest concentration was determined in Ajifu Waterway, where ΣPFAA was 58990 ng kg^-1 dry weight. The total concentrations of PFAAs in sea water samples ranged between the limit of quantification and 53.4 ng L^-1, and perfluorohexanoic acid was the most prevalent and had the highest concentration of 37 ng L^-1. The changes in the patterns and concentrations of PFAAs in Osaka Bay and coastal waters of Western Japan indicate that the PFAAs in surface waters are influenced by sources from Keihanshin Metropolitan Area, mainly the Yodo River basin, and the dilution effect which naturally occurs during their transport to the Pacific Ocean.

A chemical and microbiological characterization and toxicity assessment of the Pančevo industrial complex wastewater canal sediments, Serbia

The wastewater canal Vojlovica of the Pančevo industrial area, Serbia, is the main collector of the effluents from the local industrial complex. The canal is directly connected to the Europe's second largest river, the Danube. Here, we present a chemical and microbiological analysis of the sediment in order to determine the fate of pollutants over the years, as well as its current condition. Dry matter, clay and organic matter content, a Kjeldahl ammonia, phosphorus, metals, and polychlorinated biphenyls as well as polycyclic aromatic hydrocarbons concentrations were measured. Microbiological analysis included heterotrophic and oil-degrading bacterial counts, isolation of the phenanthrene-degrading bacteria, and identification of cyanobacteria. Generally, in comparison to the results from previous studies, concentrations of the measured pollutants have been in a decline. Specifically, the metal and polycyclic aromatic hydrocarbon concentrations were reduced whereas microbial counts and toxicity tests did not indicate significant pollution. The obtained results are probably a consequence of an improved wastewater treatment and microbial degradation of pollutants.

Analysis of the presence of perfluoroalkyl substances in water, sediment and biota of the Jucar River (E Spain). Sources, partitioning and relationships with water physical characteristics

The presence, sources and partitioning of 21 perfluoroalkyl substances (PFASs: C4-C14, C16, C18 carboxylate, C4, C6-C10 sulfonates and C8 sulfonamide) were assessed in water, sediment, and biota of the Jucar River basin (E Spain). Considering the three matrices, perfluoropentanoate (PFPeA) and perfluorooctane sulfonate (PFOS) were the most frequent compounds, being remarkable the high occurrence of short-chain PFASs (C≤8), which are intended to replace the long-chain ones in several industrial and commercial applications. In general, all samples were contaminated with at least one PFAS, with the exception of three fish samples. Mean concentrations detected in sediments (0.22-11.5ng g(-1)) and biota (0.63-274µgkg(-1)) samples were higher than those measured in water (0.04-83.1ngL(-1)), which might suggest (bio) accumulation. The occurrence of PFAS is related to urban and industrial discharges (Cuenca city in the upper part of basin, and car's factory, and effluents of the sewage treatment plant (STP) of Alzira, in the lower part). Increasing pollution gradients were found. On the other hand, higher contamination levels were observed after regulation dams of the catchment pointing out their importance in the re-distribution of these contaminants. None of the hazard quotients (HQ) calculated indicate potential risk for the different tropic levels considered (algae, Daphnia sp. and fish). PFAS concentrations found in this study can be considered in acceptable levels if compared to existing Regulatory Legislation and, consequently, they do not pose an immediate human health risk.

Influence of oxic/anoxic condition on sorption behavior of PFOS in sediment

Sediment components and redox properties change with oxic/anoxic condition, which affect the environmental transport of perfluorooctane sulfonate (PFOS). Herein, the influence of oxic/anoxic condition on the variation of redox and residual components of sediments, where organic matter, iron and manganese oxides are separated from the original sediment collected from Lake Taihu, China, are investigated. Meanwhile, the distinguishing sorption behaviors of PFOS on various residual sediments under oxic and anoxic condition are studied. Sediment after extracting iron and manganese (S-FeMn), which possessed the highest organic carbon (0.99%), had the highest affinity for PFOS under oxic condition. However, anoxic environment resulted in an increase of the pH, dissolving of organic carbon and de-protonation of S-FeMn, which caused the lower sorption capacity of PFOS on S-FeMn. Sediment after extracting manganese (S-Mn) had the higher sorption ability in anoxic environment because the Fe(2+) from S-Mn provided more effective electrostatic sites for anionic PFOS. When the environment changed to oxic condition, the iron existed as trivalent form in S-Mn, which resulted in a block of effective sorption site and reduced the sorption amounts of PFOS. The higher percentage of manganese oxides restrained the sorption of PFOS. Hence, whether or not oxic/anoxic condition promoted the PFOS sorption depended on both the percentage and form of various components in the sediment. The study generated further insight into the environmental transport of PFOS in the sediments with different properties and the wetland system, where oxic/anoxic subsurface flow was constructed.

Sorption of perfluorooctanoic acid, perfluorooctane sulfonate and perfluoroheptanoic acid on granular activated carbon

The sorption of perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), and perfluoroheptanoic acid (PFHpA) on granular activated carbon (GAC) was characterized and compared to explore the underlying mechanisms. Sorption of the three perfluoroalkyl acids (PFAAs) on GAC appeared to be a rapid intra-particle diffusion process, which were well represented by the pseudo-second-order rate model with the sorption rate following the order PFOS > PFOA > PFHpA. Sorption isotherm data were well fitted by the Freundlich model with the sorption capacity (Kf) of PFOS, PFOA and PFHpA being 4.45, 2.42 and 1.66 respectively. This suggests that the hydrophilic head group on PFAAs, i.e. sulfonate vs carboxylic, has a strong influence on their sorption. Comparison between PFOA and PFHpA revealed that hydrophobicity could also play a role in the sorption of PFAAs on GAC when the fluorocarbon chain length is different. Analyses using Attenuated Total Reflection (ATR)-Fourier Transform Infrared (FTIR) spectroscopy suggested possible formation of a negative charge-assisted H-bond between PFAAs and the functionalities on GAC surfaces, including non-aromatic ketones, sulfides, and halogenated hydrocarbons.

Perfluoroalkyl and polyfluoroalkyl substances in consumer products

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are used in a wide range of products of all day life. Due to their toxicological potential, an emerging focus is directed towards their exposure to humans. This study investigated the PFAS load of consumer products in a broad perspective. Perfluoroalkyl sulfonic acids (C4, C6-C8, C10-PFSA), carboxylic acids (C4-C14-PFCA) and fluorotelomer alcohols (4:2, 6:2; 8:2 and 10:2 FTOH) were analysed in 115 random samples of consumer products including textiles (outdoor materials), carpets, cleaning and impregnating agents, leather samples, baking and sandwich papers, paper baking forms and ski waxes. PFCA and PFSA were analysed by HPLC-MS/MS, whereas FTOH were detected by GC/CI-MS. Consumer products such as cleaning agents or some baking and sandwich papers show low or negligible PFSA and PFCA contents. On the other hand, high PFAS levels were identified in ski waxes (up to about 2000 μg/kg PFOA), leather samples (up to about 200 μg/kg PFBA and 120 μg/kg PFBS), outdoor textiles (up to 19 μg/m(2) PFOA) and some other baking papers (up to 15 μg/m(2) PFOA). Moreover, some test samples like carpet and leather samples and outdoor materials exceeded the EU regulatory threshold value for PFOS (1 μg/m(2)). A diverse mixture of PFASs can be found in consumer products for all fields of daily use in varying concentrations. This study proves the importance of screening and monitoring of consumer products for PFAS loads and the necessity for an action to regulate the use of PFASs, especially PFOA, in consumer products.

Delivery of unprecedented amounts of perfluoroalkyl substances towards the deep-sea

The finding of perfluoroalkyl substances (PFASs) in particles sinking to the deep northwestern Mediterranean Sea confirms the role of the latter as ballast for the transfer of pollutants to the deep sea. The transfer of particulate matter down to the deep is enhanced during atmosphere-driven, high-energy physical oceanographic processes like dense shelf water cascading (DSWC), which is caused by winter surface heat losses and evaporation. Here we present data from samples collected during winter 2012, when dense shelf water formation and subsequent cascading triggered the flushing of large amounts of PFASs through a submarine canyon to depths in excess of 1000 m. The finding of quantifiable concentrations of long-chain PFOA, PFOS and PFNA substances and significantly high concentrations of the short-chain substances PFHxA and PFBA indicates that these compounds, sorbed onto particulate matter, are quickly and directly transferred to the ocean's interior, thus highlighting the role of DSWC in removing those pollutants from the coastal ocean. Eventually, uncertainties about our results arising from the limited number of samples available are counterbalanced by their intrinsic value as intense DSWC events, like the one in 2012, occur only every 5-7 years in the study area, which seriously restricts sampling opportunities. Our results add PFASs to the list of persistent organic pollutants like polychlorinated biphenyls, chlorobenzenes or polycyclic aromatic hydrocarbons known to be conveyed to the deep marine environment.

Elevated levels of perfluoroalkyl substances in estuarine sediments of Charleston, SC

Urban areas are sources of perfluoroalkyl substances (PFASs) in the environment, although little is known about specific point sources and distribution of PFASs. Sentinel species, like bottlenose dolphins, are important indicators of environmental perturbations. The high PFAS levels found in dolphins inhabiting Charleston, South Carolina prompted investigation of these chemicals in this area. This study provides further evidence on the extent of contamination and potential sources of PFASs. In this study, concentrations of 11 PFASs measured in estuarine sediments collected in 2012 from the Charleston Harbor and the Ashley and Cooper Rivers (n=36) in South Carolina revealed higher levels than those reported in any other U.S. urban areas. Detectable levels were found in all sample locations with mean total PFAS concentrations of 3.79ngg(-1) (range 0.22 to 19.2ngg(-1) d.w.). Dominant compounds were perfluorooctane sulfonate (PFOS) (mean 1.52ngg(-1); range 0.09-7.37ngg(-1) d.w.), followed by perfluorodecanoate (PFDA) (mean 0.83ngg(-1); range 0.06-4.76ngg(-1) d.w.) and perfluorooctanoate (PFOA) (mean 0.42ngg(-1); range 0.02-2.52ngg(-1) d.w.). PFOS levels in sediments at 19 of 36 sites (representing 52% of the study area) exceeded the published global median PFOS sediment concentration of 0.54ngg(-1).

Optimization and comparison of several extraction methods for determining perfluoroalkyl substances in abiotic environmental solid matrices using liquid chromatography-mass spectrometry

In this study, four extraction methods of perfluoroalkyl substances (PFASs) in soils and sediments were validated and compared in order to select the one that provides the best recoveries and the highest sensitivity. The determination of PFASs was carried out by liquid chromatography-tandem mass spectrometry. The extraction methods compared were based on (i) an aqueous solution of acetic acid and methanol (recoveries 44-125%, relative standard deviation (RSD) <25%), (ii) methanol (34-109%, <25%), (iii) sodium hydroxide digestion (24-178%, <49%), and (iv) ion pair (35-179%, <31%). The best results were obtained with methanol extraction, which recovered a greater number of PFASs and provided values between 45-103% in sediment and 34-109% in soil with RSDs <25% and limits of quantification (LOQs) between 0.02-0.31 and 0.01-6.00 ng g(-1), respectively. The selected method was successfully applied to Segura River sediments and soil samples taken near the Turia River. This study demonstrates the presence of PFASs in the studied rivers of the Valencian Community (0.07-14.91 ng g(-1) in Segura River sediments; 0.02-64.04 ng g(-1) in Turia River soils). Graphical Abstract Selected matrices and extraction methods for determination of perfluoroalkyl substances.

Spatial distribution of perfluoroalkyl acids in surface sediments of the German Bight, North Sea

Perfluoroalkyl acids (PFAAs) have been determined in the environment globally. However, studies on the occurrence of PFAAs in marine sediment remain limited. In this study, 16 PFAAs are investigated in surface sediments from the German Bight, which provided a good overview of the spatial distribution. The concentrations of ΣPFAAs ranged from 0.056 to 7.4 ng/g dry weight. The highest concentration was found at the estuary of the River Ems, which might be the result of local discharge source. Perfluorooctane sulfonic acid (PFOS) was the dominant compound, and the enrichment of PFOS in sediment might be strongly related to the compound structure itself. The geographical condition of the German Bight influenced the movement of water and sediment, resulting in complex distribution. Following normalization according to total organic carbon (TOC) content, PFAA distributions showed a different picture. Significant linear relationships were found between total PFAA concentrations and TOC (R2=0.50, p<0.01). Compared with a previous study conducted in the same area, a declining trend was presented for the concentrations of PFOS and perfluorooctanoic acid (PFOA). Compound structure, geographical condition, and organic carbon in the sediment influence the distribution of PFAAs in the German Bight. Environmental risk assessment indicated that the risk from PFOA is negligible, whereas PFOS in marine sediment may present a risk for benthic organisms in the German Bight.

Insights into perfluorooctane sulfonate photodegradation in a catalyst-free aqueous solution

Photodegradation in the absence of externally added chemicals could be an attractive solution for the removal of perfluorooctane sulfonate (PFOS) in aqueous environment, but the low decomposition rate presents a severe challenge and the underlying mechanisms are unclear. In this study, we demonstrated that PFOS could be effectively degraded in a catalyst-free aqueous solution via a reduction route. Under appropriate pH and temperature conditions, a rapid PFOS photodegradation, with a pseudo-first-order decomposition rate constant of 0.91 h(-1), was achieved. In addition, hydrated electrons were considered to be the major photo-generated reductive species responsible for PFOS photodegradation in this system. Its production and reduction ability could be significantly affected by the environmental conditions such as pH, temperature and presence of oxidative species. This study gives insights into the PFOS photodegradation process and may provide useful information for developing catalyst-free photodegradation systems for decomposing PFOS and other persistent water contaminants.

Occurrence of perfluorinated alkyl substances in sediment from estuarine and coastal areas of the East China Sea

Perfluorinated alkyl substances (PFAS) have drawn much attention due to their environmental persistence, ubiquitous existence, and bioaccumulation potential. The occurrence and spatial variation of PFAS were investigated through collection of riverine and marine sediments from estuarine and coastal areas of the East China Sea. Among them, perfluorooctanesulfonic acid (PFOS), perfluoroheptanoic acid (PFHpA), and perfluorooctanoic acid (PFOA) were the three predominant PFAS with the highest detection frequencies in the sediment. PFOS up to 32.4 ng g(-1) dw and ∑PFAS up to 34.8 ng g(-1) dw were detected. Compared to other studies, high levels of PFOS were found in sediments from the East China Sea. PFHpA was also detected at higher frequency and concentration than those of other studies, which suggests point sources in this area. Concentrations of PFAS in riverine sediments were much higher than in marine sediments. Analysis of spatial variations presented overall decreasing trends of PFAS from inshore to offshore areas.

Brominated flame retardants and perfluoroalkyl substances in sediments from the Czech aquatic ecosystem

This study reports results of analysis of various groups of halogenated chemicals, including brominated flame retardants (BFRs), such as polybrominated diphenyl ethers (PBDEs), hexabromocyclododecanes (HBCDs), tetrabromobisphenol A (TBBPA) and perfluoroalkyl substances (PFASs) in 31 sediment samples collected in different localities of the Czech Republic. In this survey, identification of potential sources of these compounds was also performed; therefore several sampling sites located in highly industrialized areas were involved. Concentrations of target groups of analytes determined in sediments from several Czech rivers examined within this study decreased in the following order: decabromodiphenyl ether (BDE 209) >>> TBBPA~HBCDs~linear perfluorooctane sulfonate (L-PFOS)>other PBDEs~perfluorinated carboxylic acids (PFCAs)~perfluorooctane sulfonamide (FOSA). When compared the contamination by two monitored groups of halogenated compounds, the total content of ∑BFRs was significantly higher, i.e. in the range from the method quantification limit (MQL) to 528 μg/kg dry weight (dw) (median value 5.68 μg/kg dw), than the total concentration of ∑PFASs, that was in the range from MQL to 25.5 μg/kg dw (median value 1.48 μg/kg dw). The extremely highest content of BFR group (265-528 μg/kg dw) was found in sediments collected in sampling sites on the Labe and Lužická Nisa Rivers, which are located in highly chemical industrialized areas and also in the sample from the locality Lampertice obtained from the sedimentation tank close to the factory processing and storing waste. These concentrations were a little bit higher or comparable to those found in similar highly industrialized areas worldwide.