Phytoremediation of heavy metals--concepts and applications

Remediation mechanism of high concentrations of multiple heavy metals in contaminated soil by Sedum alfredii and native microorganisms

Pollution accident of nonferrous metallurgy industry often lead to serious heavy metal pollution of the surrounding soil. Phytoremediation of contaminated soil is an environmental and sustainable technology, and soil native microorganisms in the process of phytoremediation also participate in the remediation of heavy metals. However, the effects of high concentrations of multiple heavy metals (HCMHMs) on plants and native soil microorganisms remain uncertain. Thus, further clarification of the mechanism of phytoremediation of HCMHMs soil by plants and native soil microorganisms is required. Using the plant Sedum alfredii (S. alfredii) to restore HCMHM-contaminated soil, we further explored the mechanism of S. alfredii and native soil microorganisms in the remediation of HCMHM soils. The results showed that (i) S. alfredii can promote heavy metals from non-rhizosphere soil to rhizosphere soil, which is conducive to the effect of plants on heavy metals. In addition, it can also enrich the absorbed heavy metals in its roots and leaves; (ii) native soil bacteria can increase the abundance of signal molecule-synthesizing enzymes, such as trpE, trpG, bjaI, rpfF, ACSL, and yidC, and promote the expression of the pathway that converts serine to cysteine, then synthesize substances to chelate heavy metals. In addition, we speculated that genes such as K19703, K07891, K09711, K19703, K07891, and K09711 in native bacteria may be involved in the stabilization or absorption of heavy metals. The results provide scientific basis for S. alfredii to remediate heavy metals contaminated soils, and confirm the potential of phytoremediation of HCMHM contaminated soil.

Removal and assessment of cadmium contamination based on the toxic responds of a soil ciliate Colpoda sp

Bioremediation of cadmium (Cd) pollution, a recognized low-carbon green environmental protection technology, is significantly enhanced by the discovery of Cd-tolerant microorganisms and their underlying tolerance mechanisms. This study presents Colpoda sp., a soil ciliate with widespread distribution, as a novel bioindicator and bioremediator for Cd contamination. With a 24 h-LC50 of 5.39 mg l-1 and an IC50 of 24.85 μg l-1 in Cd-contaminated water, Colpoda sp. achieves a maximum bioaccumulation factor (BAF) of 3.58 and a Cd removal rate of 32.98 ± 0.74 % within 96 h. The toxic responses of Colpoda sp. to Cd stress were assessed through cytological observation with transmission electron microscopy (TEM), oxidative stress kinase activity, and analysis of Cd-metallothionein (Cd-MTs) and the cd-mt gene via qRT-PCR. The integrated biomarker response index version 2 (IBRv2) and structural equation models (SEM) were utilized to analyze key factors and mechanisms, revealing that the up-regulation of Cd-MTs and cd-mt expression, rather than the oxidative stress system, is the primary determinant of Cd accumulation and tolerance in Colpoda sp. The ciliate's ability to maintain growth under 24.85 μg l-1 Cd stress and its capacity to absorb and accumulate Cd particles from water into cells are pivotal for bioremediation. A new mathematical formula and regression equations based on Colpoda sp.'s response parameters have been established to evaluate environmental Cd removal levels and design remediation schemes for contaminated sites. These findings provide a novel bioremediation and monitoring pathway for Cd remobilization and accumulation in soil and water, potentially revolutionizing the governance of Cd pollution.

Assessment of growth, reproduction, and vermi-remediation potentials of Eisenia fetida on heavy metal exposure

Heavy metal pollution is a significant environmental concern with detrimental effects on ecosystems and human health, and traditional remediation methods may be costly, energy-intensive, or have limited effectiveness. The current study aims were to investigate the impact of heavy metal toxicity in Eisenia fetida, the growth, reproductive outcomes, and their role in soil remediation. Various concentrations (ranging from 0 to 640 mg per kg of soil) of each heavy metal were incorporated into artificially prepared soil, and vermi-remediation was conducted over a period of 60 days. The study examined the effects of heavy metals on the growth and reproductive capabilities of E. fetida, as well as their impact on the organism through techniques such as FTIR, histology, and comet assay. Atomic absorption spectrometry demonstrated a significant (P < 0.000) reduction in heavy metal concentrations in the soil as a result of E. fetida activity. The order of heavy metal accumulation by E. fetida was found to be Cr > Cd > Pb. Histological analysis revealed a consistent decline in the organism's body condition with increasing concentrations of heavy metals. However, comet assay results indicated that the tested levels of heavy metals did not induce DNA damage in E. fetida. FTIR analysis revealed various functional group peaks, including N-H and O-H groups, CH2 asymmetric stretching, amide I and amide II, C-H bend, carboxylate group, C-H stretch, C-O stretching of sulfoxides, carbohydrates/polysaccharides, disulfide groups, and nitro compounds, with minor shifts indicating the binding or accumulation of heavy metals within E. fetida. Despite heavy metal exposure, no significant detrimental effects were observed, highlighting the potential of E. fetida for sustainable soil remediation. Vermi-remediation with E. fetida represents a novel, sustainable, and cutting-edge technology in environmental cleanup. This study found that E. fetida can serve as a natural and sustainable method for remediating heavy metal-contaminated soils, promising a healthier future for soil.

Temporal change and impact on air quality of an energy recovery plant using the M-BACI design in Gipuzkoa

A significant concern in our society is the potential impact on both health and the environment of air pollutants released during the incineration of waste. Therefore, it is crucial to conduct thorough control and monitoring measures. In this context, the objective of this research was to study the evolution of particulate matter (PM2.5) and associated trace elements during the period before and after the installation of an Energy Recovery Plant (ERP). For that, a descriptive and temporal analysis of PM2.5 concentration and composition were performed on two similar areas (impact/control) using the Before-After/Control-Impact (BACI) design and two periods (before from January 01, 2018 to February 06, 2020 and after from December 10, 2020 to September 30, 2022). Results showed a decrease in the levels of PM2.5 and associated trace elements is observed in the impact zone (IZ) and in the control zone (CZ) throughout the study period. In the case of PM2.5, the most notable decrease occurred in the period of the start-up of the ERP, a period that coincides with the confinement and restrictions of COVID, with a subsequent increase in both zones, without reaching the levels observed in the period prior to the start-up of the ERP. Selenium is the only trace element that increases significantly in the IZ. In conclusion, a decrease is observed for all pollutants except selenium in both zones, although less pronounced in the IZ. Since selenium already showed an upward trend in the phase prior to the start of the ERP, it is necessary to investigate its evolution and find out the possible cause.

The scientific landscape of phytoremediation of tailings: a bibliometric and scientometric analysis

This article seeks to evaluate the scientific landscape of the phytoremediation of mine tailings through a series of bibliometric and scientometric techniques. Phytoremediation has emerged as a sustainable approach to remediate metal-contaminated mine waste areas. A scientometric analysis of 913 publications indexed in Web of Science from 1999 to 2023 was conducted using CiteSpace. The results reveal an expanding, interdisciplinary field with environmental sciences as the core category. Keyword analysis of 561 nodes and 2,825 links shows a focus on plant-metal interactions, microbial partnerships, bioavailability, and field validation. Co-citation analysis of 1,032 nodes and 2,944 links identifies seminal works on native species, plant-microbe interactions, and amendments. Temporal mapping of 15 co-citation clusters indicates a progression from early risk assessments and native plant inquiries to integrated biological systems, economic feasibility, and sustainability considerations. Recent trends emphasize multidimensional factors influencing adoption, such as plant-soil-microbe interactions, organic amendments, and field-scale performance evaluation. The findings demonstrate an intensifying translation of phytoremediation from scientific novelty to engineering practice. This quantitative and qualitative analysis of research trends aids in understanding the development of phytoremediation for mine tailings. The results provide valuable insights for researchers and practitioners in this evolving field.

Environmental remediation potential of a pioneer plant (Miscanthus sp.) from abandoned mine into biochar: Heavy metal stabilization and environmental application

Pyrolysis stands out as an effective method for the disposal of phytoremediation residues in abandoned mines, yielding a valuable by-product, biochar. However, the environmental application of biochar derived from such residues is limited by the potential environmental risks of heavy metals. Herein, Miscanthus sp. residues from abandoned mines were pyrolyzed into biochars at varied pyrolysis temperatures (300-700 °C) to facilitate the safe reuse of phytoremediation residues. The results showed that pyrolysis significantly stabilizes heavy metals in biomass, with Cd exhibiting the most notable stabilization effect. Acid-soluble/exchangeable and reducible fractions of Cd decreased significantly from 69.91 % to 2.52 %, and oxidizable and residue fractions increased approximately 3.24 times at 700 °C. The environmental risk assessment indicated that biochar pyrolyzed over 500 °C pose lower environmental risk (RI < 30), making them optimal for the safe utilization of phytoremediation residues. Additionally, adsorption experiments suggested that biochars prepared at higher temperature (500-700 °C) exhibit superior adsorption capacity, attributed to alkalinity and precipitation effect. This study highlights that biochars produced by pyrolyzing Miscanthus sp. from abandoned mines above 500 °C hold promise for environmental remediation, offering novel insight into the reutilization of metal-rich biomass.

Heavy metals removal from industrial wastewater of Biskra (Algeria) by Arundo donax and Phragmites australis

Industrial effluents pose a serious environmental problem, because they contain toxic contaminants mainly heavy metals that are the most dangerous to humans, animals, plants, and the environment in general. Phytoremediation using macrophytes is an adopted technique for the environment decontamination due to its efficiency and cost-effectiveness. The present study aims to highlight the capabilities of macrophytes to remove heavy metals from wastewater of Biskra region (Algeria). The methodology consists of filling out the filters planted with Arundo donax and Phragmites australis with raw industrial wastewater, then recovering decontaminated water after 15 days to assess removal of lead, copper, zinc, and iron. Both plants had shown a good efficiency for the removal of metals loaded in wastewater eliminating about 94 to 98% of initial concentration. In addition, calculated bioaccumulation factor (BAF) had confirmed the accumulation of heavy metals in different parts of experimental plants; recorded values of BAF > 1 allowed the consideration of Arundo donax and Phragmites australis as good hyper-accumulator plants. Obtained results confirm the efficiency of phytoremediation technology using macrophytes for the wastewater treatment in particular and the environment decontamination in general.

Hyperaccumulators' Diversity Enhances Cd-Contaminated Soil Restoration and Reduces Rice Cd Uptake under an Intercropping System

Cd accumulation in rice-cultivated soils across China is a major problem that needs to be tackled. A plot experiment was carried out using heavy metal (HM) hyperaccumulators Amaranthus hypochondriacus L. and Perilla frutescens (L.) Britt. intercropped with low-accumulation rice to obtain safe edible rice while reducing the soil Cd concentration. It was found that Cd concentration in soil was decreased by 7.43 and 2.86% under rice intercropped with Amaranthus hypochondriacus L. and Perilla frutescens (L.) Britt., respectively, compared to single cropped rice. In addition, enhanced effects were noted under the combination of Amaranthus hypochondriacus L., Perilla frutescens (L.) Britt, and rice in which a 20.35% decrease in soil Cd content was recorded compared to single-cultivated rice soil. In addition, the available Cd in soil was reduced by 4.00 and 5.00% under rice/Amaranthus and rice/Perilla, respectively, and 12.00% under rice/Amaranthus/Perilla mixed culture. Moreover, the concentration of Cd in various parts of rice was under permissible limits. However, rice biomass was decreased by the presence of hyperaccumulators. This study suggests that combining HM hyperaccumulator plants and low-accumulation rice provides efficient Cd extraction results and could be a crucial option for restoring Cd-contaminated soil without reducing rice production.

Nano-biogenic heavy metals adsorptive remediation for enhanced soil health and sustainable agricultural production

Hazardous heavy metal (HM) pollution constitutes a pervasive global challenge, posing substantial risks to ecosystems and human health. The exigency for expeditious detection, meticulous monitoring, and efficacious remediation of HM within ecosystems is indisputable. Soil contamination, stemming from a myriad of anthropogenic activities, emerges as a principal conduit for HM ingress into the food chain. Traditional soil remediation modalities for HM elimination, while effective are labor-intensive, susceptible to secondary contamination, and exhibit limited efficacy in regions characterized by low metal toxicity. In response to these exigencies, the eco-friendly paradigm of bioremediation has garnered prominence as a financially judicious and sustainable remedial strategy. This approach entails the utilization of hyperaccumulators, Genetically Modified Microorganisms (GMM), and advantageous microbes. The current review offers a comprehensive elucidation of cutting-edge phyto/microbe-based bioremediation techniques, with a specific emphasis on their amalgamation with nanotechnology. Accentuating their pivotal role in advancing sustainable agricultural practices, the review meticulously dissects the synergistic interplay between plants and microbes, underscoring their adeptness in HM remediation sans secondary contamination. Moreover, the review scrutinizes the challenges intrinsic to implementing bioremediation-nanotechnology interface techniques and propounds innovative resolutions. These discernments proffer auspicious trajectories for the future of agriculture. Through the environmentally conscientious marvels of phyto/microbe bioremediation, an optimistic outlook emerges for environmental preservation and the cultivation of a sustainable, salubrious planet via the conduit of cleaner agricultural production.

Source apportionment of soil PTE in a northern industrial county using PMF model: Partitioning strategies and uncertainty analysis

Positive matrix factorization (PMF) has commonly been applied for source apportionment of potentially toxic elements (PTE) in agricultural soil, however, spatial heterogeneity of PTE significantly undermines the accuracy and reliability of PMF results. In this study, a representative industrial-agricultural hub in North China (Xuanhua district, Zhangjiakou City) was selected as the research subject, multiple partition processing (PP) strategies and uncertainty analyses were integrated to advance the PMF modeling and associated algorithm mechanisms were comparatively discussed. Specifically, we adopted three methods to split the research area into several subzones according to industrial density (PP-1), population density (PP-2), and the ecological risk index (PP-3) respectively, to rectify the spatial bias phenomenon of PTE concentrations and to achieve a more interpretable result. Our results indicated that the obvious enrichment of Cd, Pb, and Zn was found in the agricultural soil, with Hg and Cd accounted for 83.49% of the overall potential ecological risk. Combining proper PP with PMF can significantly improve the modelling accuracy. Uncertainty analysis showed that interval ratios of tracer species (Cd, Pb, Hg, and Zn) calculated by PP-3 were consistently lower than that of PP-1 and PP-2, indicating that PP-3 coupled PMF can afford the optimal modeling results. It suggested that natural sources, fertilizers and pesticides, atmosphere deposition, mining, and smelting were recognized as the major contributor for the soil PTE contamination. The contribution of anthropogenic activities, specifically fertilizers and pesticides, and atmosphere deposition, increased by 1.64% and 5.91% compared to PMF results. These findings demonstrate that integration of proper partitioning processing into PMF can effectively improve the accuracy of the model even at the case of soil PTE contamination with high heterogeneity, offering support to subsequently implement directional control strategies.

Enhancing the phytoextraction efficiency of heavy metals in acidic and alkaline soils by Sedum alfredii Hance: A study on the synergistic effect of plant growth regulator and plant growth-promoting bacteria

Plant growth regulators (PGR) and plant growth-promoting bacteria (PGPB) have the potential in phytoremediation of heavy metals (HMs) contaminated soils. However, their sole application may not yield the optimal results, thus necessitating the combined application. The present study aimed to enhance the phytoremediation efficiency of Sedum alfredii Hance (S. alfredii) in acidic and alkaline soils through the combination of PGR (Brassinolide, BR) and PGPB (Pseudomonas fluorescens, P. fluorescens). The combination of BR and P. fluorescens (BRB treatment) effectively increased the removal efficiency of S. alfredii for Cd, Pb, and Zn by 355.2 and 155.3 %, 470.1 and 128.9 %, and 408.4 and 209.6 %, in acidic and alkaline soils, respectively. Moreover, BRB treatment led to a substantial increase in photosynthetic pigments contents and antioxidant enzymes activities, resulting in a remarkable increase in biomass (86.71 and 47.22 %) and dry mass (101.49 and 42.29 %) of plants grown in acidic and alkaline soils, respectively. Similarly, BRB treatment significantly elevated the Cd (109.4 and 71.36 %), Pb (174.9 and 48.03 %), and Zn levels (142.8 and 104.3 %) in S. alfredii shoots, along with cumulative accumulation of Cd (122.7 and 79.47 %), Pb (183.8 and 60.49 %), and Zn (150.7 and 117.9 %), respectively. In addition, the BRB treatment lowered the soil pH and DTPA-HMs contents, while augmenting soil enzymatic activities, thereby contributing soil microecology and facilitating the HMs absorption and translocation by S. alfredii to over-ground tissues. Furthermore, the evaluation of microbial community structure in phyllosphere and rhizosphere after remediation revealed the shift in microbial abundance. The combined treatment altered the principal effects on S. alfredii HMs accumulation from bacterial diversity to the soil HMs availability. In summary, our findings demonstrated that synergistic application of BR and P. fluorescens represents a viable approach to strengthen the phytoextraction efficacy of S. alfredii in varying soils.

Exploring Phytoremediation Potential: A Comprehensive Study of Flora Inventory and Soil Heavy Metal Contents in the Northeastern Mining Districts of Morocco

Mining activities produce waste materials and effluents with very high metal concentrations that can negatively impact ecosystems and human health. Consequently, data on soil and plant metal levels are crucial for evaluating pollution severity and formulating soil reclamation strategies, such as phytoremediation. Our research focused on soils and vegetation of a highly contaminated site with potentially toxic metals (Pb, Zn, and Cu) in the Touissit mining districts of eastern Morocco. Vegetation inventory was carried out in three mine tailings of the Touissit mine fields using the "field tower" technique. Here, 91 species belonging to 23 families were inventoried: the most represented families were Poaceae and Asteraceae, and the biological spectrum indicated a predominance of Therophytes (55.12%). From the studied areas, 15 species were selected and collected in triplicate on the tailings and sampled with their corresponding rhizospheric soils, and analyzed for Pb, Zn, and Cu concentrations. Reseda lutea, lotus marocanus, and lotus corniculatus can be considered as hyperaccumulators of Pb, as these plants accumulated more than 1000 mg·kg-1 in their aerial parts. According to TF, these plant species could serve as effective plants for Pb phytoextraction.

An insight on the plausible biological and non-biological detoxification of heavy metals in tannery waste: A comprehensive review

A key challenge for the tannery industries is the volume of tannery waste water (TWW) generated during the processing of leather, releasing various forms of toxic heavy metals resulting in uncontrolled discharge of tannery waste (TW) into the environment leading to pollution. The pollutants in TW includes heavy metals such as chromium (Cr), cadmium (Cd), lead (Pb) etc, when discharged above the permissible limit causes ill effects on humans. Therefore, several researchers have reported the application of biological and non-biological methods for the removal of pollutants in TW. This review provides insights on the global scenario of tannery industries and the harmful effects of heavy metal generated by tannery industry on micro and macroorganisms of the various ecological niches. It also provides information on the process, advantages and disadvantages of non-biological methods such as electrochemical oxidation, advanced oxidation processes, photon assisted catalytic remediation, adsorption and membrane technology. The various biological methods emphasised includes strategies such as constructed wetland, vermitechnology, phytoremediation, bioaugmentation, quorum sensing and biofilm in the remediation of heavy metals from tannery wastewater (TWW) with special emphasize on chromium.

Addressing lanthanum toxicity in plants: Sources, uptake, accumulation, and mitigation strategies

Lanthanum (La), the second most abundant rare earth element (REE) is emerging as an environmental issue, with the potential to impact ecosystems and human health. Major sources of soil contamination by La include agricultural, and industrial activities. Lanthanum is non-essential for plant growth but accumulates in various plant parts. The uptake of La by plants is intricately influenced by various factors such as soil pH, redox potential, cation exchange capacity, presence of organic acids and rhizosphere composition. These factors significantly impact the availability and absorption of La ions. Lanthanum impact on plants depends on soil characteristics, cultivated species, developmental stage, La concentration, treatment period, and growth conditions. Excessive La concentrations affect cell division, DNA structure, nutrient uptake, and photosynthesis and induce toxicity symptoms. Plants employ detoxification mechanisms like vacuolar sequestration, osmolyte synthesis, and antioxidant defense system. However, higher concentrations of La can overwhelm these defense mechanisms, leading to adverse effects on plant growth and development. Further, accumulation of La in plants increases the risk for human exposure. Strategies to mitigate La toxicity are, therefore, vital for ecosystem protection. The application of phytoremediation, supplementation, chelation, amendments, and biosorption techniques contributes to the mitigation of La toxicity. This review provides insights into La sources, uptake, toxicity, and alleviation strategies in plants. Identifying research gaps and discussing advancements aims to foster a holistic understanding and develop effective strategies for protecting plant health and ecosystem resilience against La contamination.

Native desert plants have the potential for phytoremediation of phytotoxic metals in urban cities: implications for cities sustainability in arid environments

Arid regions can benefit from using native desert plants, which require minimal freshwater and can aid in remediating soil phytotoxic metals (PTMs) from traffic emissions. In this study, we assessed the ability of three native desert plants-Pennisetum divisum, Tetraena qatarensis, and Brassica tournefortii-to accumulate phytotoxic metals (PTMs) in their different plant organs, including leaves, stems, and roots/rhizomes. The PTMs were analyzed in soil and plant samples collected from Dubai, United Arab Emirates (UAE). The results indicated significantly higher levels of PTMs on the soil surface than the subsurface layer. Brassica exhibited the highest concentrations of Fe and Zn, measuring 566.7 and 262.8 mg kg-1, respectively, while Tetraena accumulated the highest concentration of Sr (1676.9 mg kg-1) in their stems. In contrast, Pennisetum recorded the lowest concentration of Sr (21.0 mg kg-1), while Tetraena exhibited the lowest concentrations of Fe and Zn (22.5 and 30.1 mg kg-1) in their leaves. The roots of Pennisetum, Brassica, and Tetraena demonstrated the potential to accumulate Zn from the soil, with concentration factors (CF) of 1.75, 1.09, and 1.09, respectively. Moreover, Brassica exhibited the highest CF for Sr, measuring 2.34. Pennisetum, however, could not translocate PTMs from its rhizomes to other plant organs, as indicated by a translocation factor (TF) of 1. In contrast, Brassica effectively translocated the studied PTMs from its roots to the stem and leaves (except for Sr in the leaves). Furthermore, Pennisetum exclusively absorbed Zn from the soil into its leaves and stems, with an enrichment factor (EF) greater than 1. Brassica showed the ability to uptake the studied PTMs in its stem and leaves (except for Fe), while Tetraena primarily absorbed Sr and Zn into its stems. Based on the CF and TF results, Pennisetum appears to be a suitable species for phytostabilization of both Fe and Zn, while Brassica is well-suited for Sr and Zn polluted soils. Tetraena shows potential for Zn phytoremediation. These findings suggest that these plants are suitable for PTMs phytoextraction. Furthermore, based on the EF results, these plants can efficiently sequester PTMs.

Assessment of phytodiversity and phytoremediation potential of plants in the vicinity of a thermal power plant

A study was carried out to evaluate phytodiversity along with the metal accumulation potential of native plants growing in the vicinity of a thermal power plant (TPP). We documented 26 tree species, six shrubs, and 35 herbs. Importance value index (IVI), which measures the extent to which a species dominates in an area, was found highest for Senna siamea (95.7) followed by Tectona grandis (56.5), and Pithecellobium dulce (19.6). Soil was acidic (pH 5.4) in nature with higher concentrations of Al and Fe. The pH of ground water was found acidic while pH of nearby river was found slightly alkaline. Values of PM2.5 and PM10 were slightly higher than NAAQS standards for industrial areas. The concentration of metals was found higher in aquatic plants than in terrestrial plants. In general, herbs and shrubs showed more metal accumulation potential than trees. Our results suggest that Senna siamea could be used for revegetation purposes in FA landfills. Further, terrestrial and aquatic plants such as Ageratina adenophora and Stuckenia pectinata could be used for reclamation of Mn, Zn, Al, and Fe from contaminated soils. Hydrilla verticillata (Ni and Mn), Nelumbo nucifera, and Ipomoea aquatica (Cr) can be used for metal removal from contaminated water.

Phytobial remediation advances and application of omics and artificial intelligence: a review

Industrialization and urbanization increased the use of chemicals in agriculture, vehicular emissions, etc., and spoiled all environmental sectors. It causes various problems among living beings at multiple levels and concentrations. Phytoremediation and microbial association are emerging as a potential method for removing heavy metals and other contaminants from soil. The treatment uses plant physiology and metabolism to remove or clean up various soil contaminants efficiently. In recent years, omics and artificial intelligence have been seen as powerful techniques for phytobial remediation. Recently, AI and modeling are used to analyze large data generated by omics technologies. Machine learning algorithms can be used to develop predictive models that can help guide the selection of the most appropriate plant and plant growth-promoting rhizobacteria combination that is most effective at remediation. In this review, emphasis is given to the phytoremediation techniques being explored worldwide in soil contamination.

Growth, gas exchange, and leaf anatomy of Echinodorus grandiflorus (Cham. & Schltr.) Micheli under Pb contamination

Lead (Pb) can be deposited in aquatic environments that are especially subject to pollution due to wastewater and sewage disposal. This study aimed to evaluate the tolerance of Echinodorus grandiflorus (Cham. & Schltr.) Micheli to Pb and changes in growth, gas exchange, and leaf anatomy. Experiments were conducted with E. grandiflorus plants exposed to the following Pb concentrations in nutrient solution: [0; 0.75; 1.5; 3.0 and 9.0 μM Pb (NO 3)2] in a greenhouse for 60 days. At the end of the experiment, the lead concentration, growth, leaf gas exchange, and changes in leaf anatomy were evaluated. There was no mortality of E. grandiflorus plants, and they accumulated higher concentrations of Pb proportional to the concentration of the pollutant in the solution. Pb did not cause significant changes in growth, stomatal conductance, transpiration, and Ci/Ca rate but reduced the photosynthesis in E. grandiflorus. The leaf anatomy showed significant changes in the presence of Pb, reducing the epidermis and chlorophyll parenchyma. E. grandiflorus demonstrated tolerance to Pb, surviving and growing under contamination; however, it negatively modified its leaf anatomy and photosynthesis in the presence of the metal.

Phytoremediation mechanism and role of plant growth promoting rhizobacteria in weed plants for eco-restoration of hazardous industrial waste polluted site: a review

Plants have numerous strategies for phytoremediation depending upon the characteristic of pollutants. Plant growth promoting rhizobacteria (PGPR) are essential to the process of phytoremediation and play a key part in it. The mechanism of PGPR for phytoremediation is mediated by two methods; under the direct method there is phytohormone production, nitrogen fixation, nutrient mineral solubilization, and siderophore production while the indirect method includes quorum quenching, antibiosis, production of lytic enzyme, biofilm formation, and hydrogen cyanide production. Due to their economic and environmental viability, most researchers have recently concentrated on the potential of weed plants for phytoremediation. Although weed plants are considered unwanted and noxious, they have a high growth rate and adaptability which opens a high scope for its role in phytoremediation of contaminated site. The interaction of plant with rhizobacteria starts from root exudates containing various organic acids and peptides which act as nutrients essential for colonization and siderophore production by the rhizospheric bacteria. The rhizobacteria, while colonizing, tend to promote plant growth and health either directly by providing phytohormones and minerals or indirectly by suppressing growth of possible phytopathogens. Recently, several weed plants have been reported for phytoextraction of heavy metals (Ni, Pb, Zn, Hg, Cd, Cu, As, Fe, and Cr) contaminants from various agro-based industries. These potential native weed plants have high prospect of eco-restoration of polluted site with complex organo-metallic waste for sustainable development.

Salicylic acid foliar application meliorates Portulaca oleraceae L. growth responses under Pb and Ni over-availability while keeping reliable phytoremediation potential

The efficacy of SA foliar use on Pb and Ni-induced stress tolerance and phytoremediation potential by Portulaca oleraceae L. were assayed as a factorial trial based on a completely randomized design with four repetitions. The factors included; SA foliar application (0 and 100 µM) and HMs application of Pb [0, 150, and 225 mg kg-1 soil Lead (II) nitrate] and Ni [0, 220, and 330 mg kg-1 soil Nickel (II) nitrate]. Plant height, stem diameter, shoot and root fresh and dry weight, photosynthetic pigments, total soluble proteins, palmitic acid, stearic acid, arachidic acid, and some macro- and micro-elements contents were reduced facing the HMs stress, but SA foliar application ameliorated these traits. HMs stress increased malondialdehyde content, total antioxidant activity, total flavonoids, phenolics, and linolenic acid content, while SA foliar application declined the mentioned parameters. Moreover, shoot and root Pb and Ni content enhanced in the purslane plants supplemented by SA under the HMs stress. The results propose SA foliar application as a reliable methodology to recover purslane growth characters and fatty acid profiles in the soil contaminated with the HMs. The idea is that SA would be potentially effective in alleviating HMs contamination while keeping reasonable phytoremediation potential.

The Easily Overlooked Effect of Global Warming: Diffusion of Heavy Metals

Since industrialization, global temperatures have continued to rise. Human activities have resulted in heavy metals being freed from their original, fixed locations. Because of global warming, glaciers are melting, carbon dioxide concentrations are increasing, weather patterns are shifting, and various environmental forces are at play, resulting in the movement of heavy metals and alteration of their forms. In this general context, the impact of heavy metals on ecosystems and organisms has changed accordingly. For most ecosystems, the levels of heavy metals are on the rise, and this rise can have a negative impact on the ecosystem as a whole. Numerous studies have been conducted to analyze the combined impacts of climate change and heavy metals. However, the summary of the current studies is not perfect. Therefore, this review discusses how heavy metals affect ecosystems during the process of climate change from multiple perspectives, providing some references for addressing the impact of climate warming on environmental heavy metals.

Iron Plaque: A Shield against Soil Contamination and Key to Sustainable Agriculture

Soils play a dominant role in supporting the survival and growth of crops and they are also extremely important for human health and food safety. At present, the contamination of soil by heavy metals remains a globally concerning environmental issue that needs to be resolved. In the environment, iron plaque, naturally occurring on the root surface of wetland plants, is found to be equipped with an excellent ability at blocking the migration of heavy metals from soils to plants, which can be further developed as an environmentally friendly strategy for soil remediation to ensure food security. Because of its large surface-to-volume porous structure, iron plaque exhibits high binding affinity to heavy metals. Moreover, iron plaque can be seen as a reservoir to store nutrients to support the growth of plants. In this review, the formation process of iron plaque, the ecological role that iron plaque plays in the environment and the interaction between iron plaque, plants and microbes, are summarized.

The Uptake, Transfer, and Detoxification of Cadmium in Plants and Its Exogenous Effects

Cadmium (Cd) exerts a toxic influence on numerous crucial growth and development processes in plants, notably affecting seed germination rate, transpiration rate, chlorophyll content, and biomass. While considerable advances in Cd uptake and detoxification of plants have been made, the mechanisms by which plants adapt to and tolerate Cd toxicity remain elusive. This review focuses on the relationship between Cd and plants and the prospects for phytoremediation of Cd pollution. We highlight the following issues: (1) the present state of Cd pollution and its associated hazards, encompassing the sources and distribution of Cd and the risks posed to human health; (2) the mechanisms underlying the uptake and transport of Cd, including the physiological processes associated with the uptake, translocation, and detoxification of Cd, as well as the pertinent gene families implicated in these processes; (3) the detrimental effects of Cd on plants and the mechanisms of detoxification, such as the activation of resistance genes, root chelation, vacuolar compartmentalization, the activation of antioxidant systems and the generation of non-enzymatic antioxidants; (4) the practical application of phytoremediation and the impact of incorporating exogenous substances on the Cd tolerance of plants.

Bacteria associated with Comamonadaceae are key arsenite oxidizer associated with Pteris vittata root

Pteris vittata (P. vittata), an arsenic (As) hyperaccumulator commonly used in the phytoremediation of As-contaminated soils, contains root-associated bacteria (RAB) including those that colonize the root rhizosphere and endosphere, which can adapt to As contamination and improve plant health. As(III)-oxidizing RAB can convert the more toxic arsenite (As(III)) to less toxic arsenate (As(V)) under As-rich conditions, which may promote plant survial. Previous studies have shown that microbial As(III) oxidation occurs in the rhizospheres and endospheres of P. vittata. However, knowledge of RAB of P. vittata responsible for As(III) oxidation remained limited. In this study, members of the Comamonadaceae family were identified as putative As(III) oxidizers, and the core microbiome associated with P. vittata roots using DNA-stable isotope probing (SIP), amplicon sequencing and metagenomic analysis. Metagenomic binning revealed that metagenome assembled genomes (MAGs) associated with Comamonadaceae contained several functional genes related to carbon fixation, arsenic resistance, plant growth promotion and bacterial colonization. As(III) oxidation and plant growth promotion may be key features of RAB in promoting P. vittata growth. These results extend the current knowledge of the diversity of As(III)-oxidizing RAB and provide new insights into improving the efficiency of arsenic phytoremediation.

Coupling of phycoremediation and phytoremediation technologies to treat tannery effluents with rainwater dilutions

From tannery effluent (TE) severely polluted with heavy metals (HMs viz., Cr, Cu, Cd, and Pb), hydrophytic phytoextraction remains a challenge as transplanted plants succumb to death on facing acclimatization shock. Current study was aimed at diluting TE with harvested rainwater (HR) for improving HM phytoextraction potential of Phragmites australis (a hydrophyte) assisted with phycoremediation of coupled algae (viz., Oedogonium sp. and Pithophora sp.). The TE:HR dilutions (TEDs) 0, 25, 50, 75, and 100% (v/v) included three sets: set-1 included algae only, set-2 included P. australis only and set-3 included P. australis coupled with combined algal inoculum. Results showed that P. australis assisted with HR dilution and combined algal inoculum showed significantly greater uptake of HMs from each of the TEDs than respective control treatments. Combined algal application in the TEDs proved phycoremediation assistants based on their bioaccumulation factor (BF). The dry biomass of P. australis in TEDs applied with phycoremediation assistants remained greater than uninoculated ones. Overall, HM translocation factor (TF) of P. australis for Cr, Cu, Cd, and Pb remained ≥ 1. The study concludes that HM phytoextraction is substantially increased when concentrated TE is diluted with HR and assisted with phycoremediation of HM tolerant algae.

Mapping soil trace metal distribution using remote sensing and multivariate analysis

Trace metal soil contamination poses significant risks to human health and ecosystems, necessitating thorough investigation and management strategies. Researchers have increasingly utilized advanced techniques like remote sensing (RS), geographic information systems (GIS), geostatistical analysis, and multivariate analysis to address this issue. RS tools play a crucial role in collecting spectral data aiding in the analysis of trace metal distribution in soil. Spectroscopy offers an effective understanding of environmental contamination by analyzing trace metal distribution in soil. The spatial distribution of trace metals in soil has been a key focus of these studies, with factors influencing this distribution identified as soil type, pH levels, organic matter content, land use patterns, and concentrations of trace metals. While progress has been made, further research is needed to fully recognize the potential of integrated geospatial imaging spectroscopy and multivariate statistical analysis for assessing trace metal distribution in soils. Future directions include mapping multivariate results in GIS, identifying specific anthropogenic sources, analyzing temporal trends, and exploring alternative multivariate analysis tools. In conclusion, this review highlights the significance of integrated GIS and multivariate analysis in addressing trace metal contamination in soils, advocating for continued research to enhance assessment and management strategies.

Potential strategies for phytoremediation of heavy metals from wastewater with circular bioeconomy approach

Water pollution is an inextricable problem that stems from natural and human-related factors. Unfortunately, with rapid industrialization, the problem has escalated to alarming levels. The pollutants that contribute to water pollution include heavy metals (HMs), chemicals, pesticides, pharmaceuticals, and other industrial byproducts. Numerous methods are used for treating HMs in wastewater, like ion exchange, membrane filtration, chemical precipitation, adsorption, and electrochemical treatment. But the remediation through the plant, i.e., phytoremediation is the most sustainable approach to remove the contaminants from wastewater. Aquatic plants illustrate the capacity to absorb excess pollutants including organic and inorganic compounds, HMs, and pharmaceutical residues present in agricultural, residential, and industrial discharges. The extensive exploitation of these hyperaccumulator plants can be attributed to their abundance, invasive mechanisms, potential for bioaccumulation, and biomass production. Post-phytoremediation, plant biomass can be toxic to both water bodies and soil. Therefore, the circular bioeconomy approach can be applied to reuse and repurpose the toxic plant biomass into different circular bioeconomy byproducts such as biochar, biogas, bioethanol, and biodiesel is essential. In this regard, the current review highlights the potential strategies for the phytoremediation of HMs in wastewater and various strategies to efficiently reuse metal-enriched biomass material and produce commercially valuable products. The implementation of circular bioeconomy practices can help overcome significant obstacles and build a new platform for an eco-friendlier lifestyle.

Recent advances in phyto-combined remediation of heavy metal pollution in soil

The global industrialization and modernization have witnessed a rapid progress made in agricultural production, along with the issue of soil heavy metal (HM) pollution, which has posed severe threats to soil quality, crop yield, and human health. Phytoremediation, as an alternative to physical and chemical methods, offers a more cost-effective, eco-friendly, and aesthetically appealing means for in-situ remediation. Despite its advantages, traditional phytoremediation faces challenges, including variable soil physicochemical properties, the bioavailability of HMs, and the slow growth and limited biomass of plants used for remediation. This study presents a critical overview of the predominant plant-based HM remediation strategies. It expounds upon the mechanisms of plant absorption, translocation, accumulation, and detoxification of HMs. Moreover, the advancements and practical applications of phyto-combined remediation strategies, such as the addition of exogenous substances, genetic modification of plants, enhancement by rhizosphere microorganisms, and intensification of agricultural technologies, are synthesized. In addition, this paper also emphasizes the economic and practical feasibility of some strategies, proposing solutions to extant challenges in traditional phytoremediation. It advocates for the development of cost-effective, minimally polluting, and biocompatible exogenous substances, along with the careful selection and application of hyperaccumulating plants. We further delineate specific future research avenues, such as refining genetic engineering techniques to avoid adverse impacts on plant growth and the ecosystem, and tailoring phyto-combined strategies to diverse soil types and HM pollutants. These proposed directions aim to enhance the practical application of phytoremediation and its integration into a broader remediation framework, thereby addressing the urgent need for sustainable soil decontamination and protection of ecological and human health.

Role of Root Exudates on the Soil Microbial Diversity and Biogeochemistry of Heavy Metals

Due to extensive industrialization and escalation in pollution, the world is facing problems related to soil heavy metal pollution. The traditional ways of soil remediation are neither feasible nor cost-effective in most of the real-world scenarios, where metal concentration is relatively low in soil. Therefore, phytoremediation using plants and plant secretions to remediate heavy metal-contaminated soil is recently getting more attention. The plant root exudates act as an ecological driver in the rhizospheric region where they influence and guide the microbial community to function in such a way that can be advantageous for plant growth. They also promote phytoremediation process by altering the bioavailability of pollutants in soil. Root exudates affect the biogeochemical properties of heavy metals as well. In this review, existing literature on the role of root exudates (natural as well as artificial) on the phytoremediation of heavy metal-contaminated (particularly lead) soil is reviewed. The effect of root exudates on the biogeochemistry of lead in soil is also discussed.

Sensitive electrochemical sensor for Cd2+ with engineered short high-affinity aptamer undergoing large conformation change

Cadmium ion (Cd2+) is a highly toxic heavy metal ion that threatens the environment and human health. To achieve rapid and sensitive detection of Cd2+, here we developed a reagent-less aptamer electrochemical sensor by immobilizing an engineered high-affinity DNA aptamer with a redox tag of methylene blue (MB) on the gold electrode. After testing a series of engineered aptamer sequences, we employed an optimal and new 15-mer aptamer with a short 3-bp stem for sensor fabrication, which underwent large conformation change upon Cd2+ binding. This aptamer retained high affinity with a Kd about 360 nM, verified by isothermal titration calorimetry (ITC) analysis. In the presence of Cd2+, this aptamer folded into a stem-loop structure, drawing the MB into a close proximity to the electrode surface and generating enhanced current in square wave voltammetry (SWV). Under the optimized conditions, this aptamer sensor enabled us to sensitively detect Cd2+ in a wide concentration range from 0.5 nM to 4 μM, and the detection limit was 90 pM. The developed electrochemical aptasensor has the advantages in easy preparation, rapid response, high stability, high selectivity and easy regeneration and reuse, showing the potential for Cd2+ detection in broad applications.

Pyrolysis of biomass harvested from heavy-metal contaminated area: Characteristics of bio-oils and biochars from batch-wise one-stage and continuous two-stage pyrolysis

This study evaluates pyrolysis products obtained from biomasses (silver grass, pine, and acacia) harvested from heavy-metal-contaminated soil. To do so, we utilized two methods: a batch one-stage pyrolysis, and a continuous two-stage pyrolysis. The study results show that the yields and characteristics of bio-oils and biochars varied depending on the pyrolysis process and the type of biomass. The two-stage pyrolysis having two reactors (auger and fluidized bed reactors) appeared to be very suitable for specific chemicals production such as acetic acid, acetol, catechol, and levoglucosan. The biochar obtained from the fluidized-bed reactor of two-stage pyrolysis had high thermal stability, high crystallinity, high inorganic content, and a small number of functional groups. In contrast, the biochar obtained from the one-stage pyrolysis had low thermal stability, low crystallinity, a high carbon content, and a large number of functional groups. The biochar obtained from the two-stage pyrolysis appeared to be suitable as a material for catalyst support and as an adsorbent. The biochar obtained from one-stage pyrolysis appeared to be a suitable as a soil amendment, as an adsorbent, and as a precursor of activated carbon. All biochars showed a negative carbon footprint. In the end, this study, which was conducted using two different processes, was able to obtain the fact that products of pyrolysis biomass contaminated with heavy metals have different characteristics depending on the process characteristics and that their utilization plans are different accordingly. If the optimal utilization method proposed through this study is found, pyrolysis will be able to gain importance as an effective treatment method for biomass contaminated with heavy metals.

Lead, Cadmium, and Arsenic in Raw Milk Produced in the Vicinity of a Mini Mineral Concentrator in the Central Andes and Health Risk

The bovine milk quality, safety, and security are of great concern mainly due to the dispersion of toxic substances from various anthropogenic activities and poor practices for organophosphates in agriculture use. This study evaluated the potential risk to human health from lead (Pb), cadmium (Cd), and arsenic (As) from the consumption of milk produced in an area of the Central Andes valley near a mini mineral concentrator by estimating the weekly intake (WI), dietary risk quotient (DRC), hazard quotient (THQ), and hazard index (HI) for the Peruvian population aged 2 to 85 years, in three scenarios of milk consumption by age (minimum, average, and maximum). Toxic element quantification was performed by flame atomic absorption spectrometry following standardized procedures. The mean amount ± standard deviation of Pb, Cd, and As in soils was 292±60.90, 3.54±1.58, and 5.60±2.20 mg/kg, the order of importance being Pb>As>Cd. The contents of Pb, Cd, and As in pastures were 23.17±10.02, 0.25±0.57, and 0.06±0.09 mg/kg, being from highest to lowest Pb>Cd>As. The means of Pb, Cd, and As content in 19 milk samples were 0.029±0.022, 0.007±0.006, and 0.010±0.004 mg/kg. Pb and Cd exceeded the maximum permissible limits (MPL), and the As was below the MPL. At all ages and milk consumption levels, the WI for Pb and Cd were below the estimated tolerable intake (TWI). The WI for As in < 19 years was higher than the TWI. The DRC for Pb and Cd at all three milk intake levels and all ages was < 1, and for As, it was > 1 in < 19 years, being the risk group. The TQH and HI for Pb and Cd were also > 1, signifying no health risk, and for As, the values were > 1 in < 11 years. Our results are valuable for preventing adverse health impacts from safe and innocuous milk consumption.

Phytostabilization of Heavy Metals and Fungal Community Response in Manganese Slag under the Mediation of Soil Amendments and Plants

The addition of soil amendments and plants in heavy metal-contaminated soil can result in a significant impact on physicochemical properties, microbial communities and heavy metal distribution, but the specific mechanisms remain to be explored. In this study, Koelreuteria paniculata was used as a test plant, spent mushroom compost (SMC) and attapulgite (ATP) were used as amendments, and manganese slag was used as a substrate. CK (100% slag), M0 (90% slag + 5% SMC + 5% ATP) and M1 (90% slag + 5% SMC + 5% ATP, planting K. paniculata) groups were assessed in a pilot-scale experiment to explore their different impacts on phytoremediation. The results indicated that adding the amendments significantly improved the pH of the manganese slag, enhancing and maintaining its fertility and water retention. Adding the amendments and planting K. paniculata (M1) significantly reduced the bioavailability and migration of heavy metals (HMs). The loss of Mn, Pb and Zn via runoff decreased by 15.7%, 8.4% and 10.2%, respectively, compared to CK. K. paniculata recruited and enriched beneficial fungi, inhibited pathogenic fungi, and a more stable fungal community was built. This significantly improved the soil quality, promoted plant growth and mitigated heavy metal toxicity. In conclusion, this study demonstrated that the addition of SMC-ATP and planting K. paniculata showed a good phytostabilization effect in the manganese slag and further revealed the response process of the fungal community in phytoremediation.

In vitro and in vivo screening of bacterial species from contaminated soil for heavy metal biotransformation activity

Heavy metals (HMs) are widely used in various industries. High concentrations of HMs can be severely toxic to plants, animals and humans. Microorganism-based bioremediation has shown significant potential in degrading and detoxifying specific HM contaminants. In this study, we cultivated a range of bacterial strains in liquid and solid nutrient medium containing different concentrations of different HMs to select and analyze bacteria capable of transforming HMs. The bacterial strains most resistant to selected HMs and exhibiting the ability to remove HMs from contaminated soils were identified. Then, the bacterial species capable of utilizing HMs in soil model experiments were selected, and their ability to transform HMs was evaluated. This study has also generated preliminary findings on the use of plants for further removal of HMs from soil after microbial bioremediation. Alcaligenes faecalis, Delftia tsuruhatensis and Stenotrophomonas sp. were selected for their ability to grow in and utilize HM ions at the maximum permissible concentration (MPC) and two times the MPC. Lysinibacillus fusiformis (local microflora) can be used as a universal biotransformation tool for many HM ions. Brevibacillus parabrevis has potential for the removal of lead ions, and Brevibacillus reuszeri and Bacillus safensis have potential for the removal of arsenic ions from the environment. The bacterial species have been selected for bioremediation to remove heavy metal ions from the environment.

Cadmium/zinc stresses and plant cultivation influenced soil microflora: a pot experiment conducted in field

It's of great challenge to address for heavy metal-contaminated soil. Once the farmland is contaminated with heavy metals, the microbial ecology of the plant rhizosphere will change, which in turn impacts crop productivity and quality. However, few studies have explored the effects of heavy metals on plant rhizosphere microbes in farmland and the role that plant cultivation plays in such a phytoremediation practice. In this study, the impacts of comfrey (Symphytum officinale L.) cultivation and the stresses of cadmium/zinc (Cd/Zn) on rhizosphere soil microflora were examined. Microbial DNA was collected from soils to evaluate the prevalence of bacteria and fungi communities in rhizosphere soils. High-throughput 16 S rRNA sequencing was used to determine the diversity of the bacterial and fungal communities. The results showed that growing comfrey on polluted soils reduced the levels of Cd and Zn from the vertical profile. Both the comfrey growth and Cd/Zn stresses affected the community of rhizosphere microorganisms (bacteria or fungi). Additionally, the analysis of PCoA and NMDS indicated that the cultivation of comfrey significantly changed the bacterial composition and structure of unpolluted soil. Comfrey cultivation in polluted and unpolluted soils did not result in much variance in the fungi's species composition, but the fungal compositions of the two-type soils were noticeably different. This work provided a better understanding of the impacts of Cd/Zn stresses and comfrey cultivation on rhizosphere microbial community, as well as new insight into phytoremediation of heavy metal-contaminated soils.

Response strategies of slash pine (Pinus elliottii) to cadmium stress and the gain effects of inoculation with Herbaspirillum sp. YTG72 in alleviating phytotoxicity and enhancing accumulation of cadmium

Phytoremediation using fast-growing woody plants assisted by plant growth-promoting bacteria (PGPB) on cadmium (Cd)-contaminated sites is considered a promising technique; however, its remediation efficiency is still affected by multiple factors. In this study, the mining areas' soil conditions were simulated with different Cd addition levels (0, 3, 6, 9 mg kg-1) in order to investigate the response strategy to Cd stress of fast-growing economic tree species, slash pine (Pinus elliottii), and the effects of inoculation with the PGPB strain Herbaspirillum sp. YTG72 on the physiological activity and Cd accumulation of plants. The main results showed that there were significant (p < 0.05) increases in contents of chlorophyll and nutrient elements (P, K, Ca, and Mg) at low Cd addition level (3 mg kg-1) compared to non-Cd addition treatment. When the additive amount of Cd increased, the growth of plants was severely inhibited and the content of proline was increased, as well as Cd in plants. Besides, the ratios of K:P, Ca:P, and Mg:P in plants were negatively correlated with the contents of Cd in plants and soils. Inoculation of P. elliottii with the PGPB strain Herbaspirillum sp. YTG72 improved the physiological functions of the plants under Cd stress and activated the antioxidant system, reduced the accumulation of proline, and decreased the ratios of K:P, Ca:P, and Mg:P in plant. More importantly, planting P. elliottii in Cd-contaminated soil could significantly (p < 0.05) reduce the Cd content in the rhizosphere soil, and furthermore, inoculation treatment could promote the reduction of soil Cd content and increased the accumulation of Cd by root. The results of the present study emphasized the Cd response mechanism of P. elliottii based on multifaceted regulation, as well as the feasibility of strain Herbaspirillum sp. YTG72 assisted P. elliottii for the remediation on Cd-contaminated sites.

Copper-dependent control of uptake, translocation and accumulation of cadmium in hyperaccumlator Sedum alfredii

Cadmium (Cd) is detrimental to plant growth and threatens human health. Here, we investigated the potential for remediation of Cd-contaminated soil with high copper (Cu) background using Cd hyperaccumulator ecotype (HE) Sedum alfredii. We assessed effects of Cu on Cd accumulation, compartmentation and translocation in HE S. alfredii, and compared with those in a related non-accumulator ecotype (NHE). We found that Cu supply significantly induced Cd accumulation in roots and shoots of long-term soil-cultivated HE S. alfredii. A large fraction of root Cd was accumulated in the organelles, but a small fraction was stored in the cell wall. Importantly, Cu addition reduced Cd accumulation in the cell wall and the organelles in root cells. Furthermore, leaf cell capacity to sequestrate Cd in the organelles was greatly improved upon Cu exposure. We also found that genes involving metal transport and cell wall remodeling were distinctly regulated to mediate Cd accumulation in HE S. alfredii. These findings indicate that Cu-dependent decrease of root cell-wall-bound Cd, and stimulation of efflux/influx of organelle Cd transport in root and leaf cells plays a role in the dramatic Cd hyperaccumulation expressed in naturally survived HE S. alfredii.

The functional division of arbuscular mycorrhizal fungi and earthworm to efficient cooperation on phytoremediation in molybdenum (Mo) contaminated soils

Single phytoremediation has limited capacity to restore soil contaminated with extreme Mo due to its low metal accumulation. Soil organisms can help compensate for this deficiency in Mo-contaminated soils. However, there is limited information available on the integrated roles of different types of soil organisms, particularly the collaboration between soil microorganisms and soil animals, in phytoremediation. The objective of this study is to investigate the effects of a combination of arbuscular mycorrhizal fungi (AMF) and earthworms on the remediation of Mo-contaminated soils by alfalfa (Medicago sativa L.). The results indicated that in the soil-alfalfa system, earthworms effectively drive soil Mo activation, while AMF significantly improve the contribution of the translocation factor to total Mo removal (TMR) in alfalfas (p < 0.05). Meanwhile, compared to individual treatments, the combination of AMF and earthworm enhanced the expression of alfalfa root specific Mo transporter - MOT1 family genes to increase alfalfa uptake Mo (p < 0.05). This alleviated the competition between P/S nutrients and Mo on non-specific Mo transporters-P/S transporters (p < 0.05). Additionally, the proportion of organelle-bound Mo in the root was reduced to decrease Mo toxicity, while the cell wall-bound Mo proportion in the shoot was increased to securely accumulate Mo. The contributions of inoculants to alfalfa TMR followed the order (maximum increases): AMF + E combination (274.68 %) > alone treatments (130 %). Overall, the "functional division and cooperation" between earthworm and AMF are of great importance to the creation of efficient multi-biological systems in phytoremediation.

An Update in Computational Methods for Environmental Monitoring: Theoretical Evaluation of the Molecular and Electronic Structures of Natural Pigment-Metal Complexes

Metals are beneficial to life, but the presence of these elements in excessive amounts can harm both organisms and the environment; therefore, detecting the presence of metals is essential. Currently, metal detection methods employ powerful instrumental techniques that require a lot of time and money. Hence, the development of efficient and effective metal indicators is essential. Several synthetic metal detectors have been made, but due to their risk of harm, the use of natural pigments is considered a potential alternative. Experiments are needed for their development, but they are expensive and time-consuming. This review explores various computational methods and approaches that can be used to investigate metal-pigment interactions because choosing the right methods and approaches will affect the reliability of the results. The results show that quantum mechanical methods (ab initio, density functional theory, and semiempirical approaches) and molecular dynamics simulations have been used. Among the available methods, the density functional theory approach with the B3LYP functional and the LANL2DZ ECP and basis set is the most promising combination due to its good accuracy and cost-effectiveness. Various experimental studies were also in good agreement with the results of computational methods. However, deeper analysis still needs to be carried out to find the best combination of functions and basis sets.

Significance of phosphorus deficiency for the mitigation of mercury toxicity in the Robinia pseudoacacia L.- rhizobia symbiotic association

Nitrogen (N2)-fixing legumes can be used for phytoremediation of toxic heavy metal Mercury (Hg) contaminated soil, but N2-fixation highly relies on phosphorus (P) availability for nodule formation and functioning. Here, we characterized the significance of P deficiency for Hg accumulation and toxicity in woody legume plants. Consequences for foliar and root traits of rhizobia inoculation, Hg exposure (+Hg) and low P (-P) supply, individually and in combination were characterized at both the metabolite and transcriptome levels in seedlings of two Robinia pseudoacacia L. provenances originating from contrasting climate and soil backgrounds, i.e., GS in northwest and the DB in northeast China. Our results reveal that depleted P mitigates the toxicity of Hg at the transcriptional level. In leaves of Robinia depleted P reduced oxidative stress and improved the utilization strategy of C, N and P nutrition; in roots depleted P regulated the expression of genes scavenging oxidative stress and promoting cell membrane synthesis. Rhizobia inoculation significantly improved the performance of both Robinia provenances under individual and combined +Hg and -P by promoting photosynthesis, increasing foliar N and P content and reducing H2O2 and MDA accumulation despite enhanced Hg uptake. DB plants developed more nodules, had higher biomass and accumulated higher Hg amounts than GS plants and thus are suggested as the high potential Robinia provenance for future phytoremediation of Hg contaminated soils with P deficiency.

Silicon nanoparticles vs trace elements toxicity: Modus operandi and its omics bases

Phytotoxicity of trace elements (commonly misunderstood as 'heavy metals') includes impairment of functional groups of enzymes, photo-assembly, redox homeostasis, and nutrient status in higher plants. Silicon nanoparticles (SiNPs) can ameliorate trace element toxicity. We discuss SiNPs response against several essential (such as Cu, Ni, Mn, Mo, and Zn) and non-essential (including Cd, Pb, Hg, Al, Cr, Sb, Se, and As) trace elements. SiNPs hinder root uptake and transport of trace elements as the first line of defence. SiNPs charge plant antioxidant defence against trace elements-induced oxidative stress. The enrolment of SiNPs in gene expressions was also noticed on many occasions. These genes are associated with several anatomical and physiological phenomena, such as cell wall composition, photosynthesis, and metal uptake and transport. On this note, we dedicate the later sections of this review to support an enhanced understanding of SiNPs influence on the metabolomic, proteomic, and genomic profile of plants under trace elements toxicity.

The efficient applications of native flora for phytorestoration of mine tailings: a pan-global survey

Mine tailings are the discarded materials resulting from mining processes after minerals have been extracted. They consist of leftover mineral fragments, excavated land masses, and disrupted ecosystems. The uncontrolled handling or discharge of tailings from abandoned mine lands (AMLs) poses a threat to the surrounding environment. Numerous untreated mine tailings have been abandoned globally, necessitating immediate reclamation and restoration efforts. The limited feasibility of conventional reclamation methods, such as cost and acceptability, presents challenges in reclaiming tailings around AMLs. This study focuses on phytorestoration as a sustainable method for treating mine tailings. Phytorestoration utilizes existing native plants on the mine sites while applying advanced principles of environmental biotechnology. These approaches can remediate toxic elements and simultaneously improve soil quality. The current study provides a global overview of phytorestoration methods, emphasizing the specifics of mine tailings and the research on native plant species to enhance restoration ecosystem services.

Chromosome-scale assembly of the streamlined picoeukaryote Picochlorum sp. SENEW3 genome reveals Rabl-like chromatin structure and potential for C4 photosynthesis

Genome sequencing and assembly of the photosynthetic picoeukaryotic Picochlorum sp. SENEW3 revealed a compact genome with a reduced gene set, few repetitive sequences, and an organized Rabl-like chromatin structure. Hi-C chromosome conformation capture revealed evidence of possible chromosomal translocations, as well as putative centromere locations. Maintenance of a relatively few selenoproteins, as compared to similarly sized marine picoprasinophytes Mamiellales, and broad halotolerance compared to others in Trebouxiophyceae, suggests evolutionary adaptation to variable salinity environments. Such adaptation may have driven size and genome minimization and have been enabled by the retention of a high number of membrane transporters. Identification of required pathway genes for both CAM and C4 photosynthetic carbon fixation, known to exist in the marine mamiellale pico-prasinophytes and seaweed Ulva, but few other chlorophyte species, further highlights the unique adaptations of this robust alga. This high-quality assembly provides a significant advance in the resources available for genomic investigations of this and other photosynthetic picoeukaryotes.

Towards a comprehensive understanding of zinc tolerance in Limonium brasiliense as a useful tool for environmental remediation and monitoring

Heavy metal pollution is a serious environmental problem worldwide, creating the necessity to find eco-friendly strategies for monitoring and remediating environments. This study aimed to evaluate morphological, physiological, and biochemical responses as indicative of Zn tolerance in Limonium brasiliense and to determine the ability of this halophyte to accumulate different concentrations of Zn (0, 100, and 200 μM) in hydroponic conditions. The leaf shape at high Zn concentration showed enlarged petioles and lanceolate blades, whereas the leaf size was reduced. Water content, chlorophyll fluorescence parameters, and pigment content decreased with Zn addition. Of the antioxidant activities, only APx increased 75% compared to the control by Zn stress. Zn concentration was higher in aerial structures than in roots (BAC> 1 and TF> 1), suggesting that L. brasiliense could function as an accumulator of Zn. Its great ability to resist metal stress and its strong capacity to protect itself against high Zn concentration postulate it as a good phytoremediation of environments enriched with Zn. The study emphasizes using leaf morphology as an early biomonitoring tool for detecting Zn pollution, providing more evidence of their potential use as a biomarker for evaluating and assessing ecosystem health in biomonitoring programs.

Selenium increases antimony uptake in ramie (Boehmeria nivea L.) by enhancing the physiological, antioxidative, and ionomic mechanisms

Ramie (Boehmeria nivea L.) is a promising phytoremediation candidate due to its high tolerance and enrichment capacity for antimony (Sb). However, challenges arise as Sb accumulated mainly in roots, complicating soil extraction. Under severe Sb contamination, the growth of ramie may be inhibited. Strategies are needed to enhance Sb accumulation in ramie's aboveground parts and improve tolerance to Sb stress. Considering the beneficial effects of selenium (Se) on plant growth and enhancing resistance to abiotic stresses, this study aimed to investigate the potential use of Se in enhancing Sb uptake by ramie. We investigated the effects of Se (0.5, 1, 2, 5, or 10 μM) on ramie growth, Sb uptake and speciation, antioxidant responses, and ionomic profiling in ramie under 10 mg/L of SbIII or antimonate (SbV) stresses. Results revealed that the addition of 0.5 μM Se significantly increased shoot biomass by 75.73% under SbIII stress but showed minimal effects on shoot and root length in both SbIII and SbV treatments. Under SbIII stress, 2 μM Se significantly enhanced Sb concentrations by 48.42% in roots and 62.88% in leaves. In the case of SbV exposure, 10 μM Se increased Sb content in roots by 42.57%, and 1 μM Se led to a 91.74% increase in leaves. The speciation analysis suggested that Se promoted the oxidation of SbIII to less toxic SbV to mitigate Sb toxicity. Additionally, Se addition effectively minimized the excess reactive oxygen species produced by Sb exposure, with the lowest malondialdehyde (MDA) content at 0.5 μM Se under SbIII and 2 μM Se under SbV, by activating antioxidant enzymes including superoxide dismutase, catalase, peroxidase, and glutathione peroxidase. Ionomic analysis revealed that Se helped in maintaining the homeostasis of certain nutrient elements, including magnesium, potassium (K), calcium (Ca), iron (Fe), and copper (Cu) in the SbIII-treated roots and K and manganese (Mg) in the SbV-treated roots. The results suggest that low concentrations of Se can be employed to enhance the phytoremediation of Sb-contaminated soils using ramie.

Assessment of heavy metal accumulation and potential risks in surface sediment of estuary area: A case study of Dagu river

Soil/sediment samples of four different land types were collected from aquaculture land, farmland, industrial land and river bottom sediment in the estuary area of Dagu River. The contents of Cr, Cu, Zn, As, Cd and Pb in 0-30 cm inner surface samples were detected, and the distribution characteristics of heavy metal content in surface soil/sediment of different land use types in the estuary area were analyzed. Local accumulation index method, potential risk index evaluation method and principal component analysis method were used to analyze the pollution status and sources of heavy metals. The results showed that the heavy metal accumulation levels in soil and sediment samples in the study area were As > Cd > Cu > Pb > Zn > Cr, and the heavy metal content exceeded the soil background value in Shandong Province, but the potential risks were all in a low risk state. The main sources of Cr, Zn and As are transportation sources and natural sources, while the main sources of Cd and Pb are agricultural.

Plant growth-promoting bacteria isolated from earthworms enhance spinach growth and its phytoremediation potential in metal-contaminated soils

The aim of this study was to evaluate the impact of metal-tolerant plant growth-promoting bacteria (PGPB) isolated from the chloragogenous tissue of Aporrectodea molleri, which represents a unique habitat. Our objectives were to investigate their effects on the growth of Spinacia oleracea under heavy metal stress and assess their potential for enhancing phytoremediation capabilities. The experiment was conducted in an alkaline soil contaminated with 7 mg kg-1 of cadmium, 100 mg kg-1 of nickel, 150 mg kg-1 of copper, 300 mg kg-1 of Zinc, and mg kg-1 of 600 Manganese. The results showed that heavy metal stress considerably diminished root (42.8%) and shoot length (60.1%), biomass (80%), chlorophyll content (41%), soil alkaline (45%), and acid (51%) phosphatases (42%) and urease (42%). However, soil inoculation with bacterial isolates remarkably improved plant growth. Soil bioaugmentation increased spinach growth (up to 74.5% for root length, up to 106.3% for shoot length, and up to 5.5 folds for fresh biomass) while significantly increasing soil enzyme activity and NPK content. Multivariate data analysis indicated that soil inoculation with Bacillus circulans TC7 promoted plant growth while limiting metal bioaccumulation, whereas Pseudomonas sp. TC33 and Bacillus subtilis TC34 increased metal bioaccumulation in spinach tissues while minimizing their toxicity. Our study confirms that earthworms are a reservoir of multi-beneficial bacteria that can effectively improve phytoremediation efficiency and mitigate the toxic effects of heavy metals on plant growth. Further studies are needed to investigate the long-term effects and feasibility of using these isolates as a consortium in field applications.

Potential of Pinus radiata, Eucalyptus globulus and Acacia dealbata for the long-term phytostabilization of copper mine tailings

Many contaminated tailings throughout the world cause environmental and human-health related problems due to air and water drift. Tailing phytostabilization is a promising solution, but only certain plant species may tolerate and grow in these contaminated areas. We analyzed the chemical properties of a vegetated and unvegetated area in a tailing site in Central Chile. In addition, in the vegetated area we analyzed the metals content of roots, stems, and foliage in 41-years old plantations of Pinus radiata, Acacia dealbata, and Eucalyptus globulus (the only three species that survived from a total of 34 species planted), and determined height (H), and diameter at breast height (DBH). The results indicated that, except for pH, Se, Pb, and organic matter, all components (nutrients and metals) were two- to three- fold lower in the vegetated tailing compared to that of the unvegetated tailing. The analysis of plant tissues indicated that Cu was higher in the roots of P. radiata (2,073 mg kg-1) and lower in the stems of the same species (4.1 mg kg-1). However, the ability to take up and transport Cu to the shoots was higher in A. dealbata and lower in P. radiata (bioaccumulation factor of 0.19 and 0.06, respectively).

Phytochemicals Involved in Mitigating Silent Toxicity Induced by Heavy Metals

Heavy metals (HMs) are natural elements present in the Earth's crust, characterised by a high atomic mass and a density more than five times higher than water. Despite their origin from natural sources, extensive usage and processing of raw materials and their presence as silent poisons in our daily products and diets have drastically altered their biochemical balance, making them a threat to the environment and human health. Particularly, the food chain polluted with toxic metals represents a crucial route of human exposure. Therefore, the impact of HMs on human health has become a matter of concern because of the severe chronic effects induced by their excessive levels in the human body. Chelation therapy is an approved valid treatment for HM poisoning; however, despite the efficacy demonstrated by chelating agents, various dramatic side effects may occur. Numerous data demonstrate that dietary components and phytoantioxidants play a significant role in preventing or reducing the damage induced by HMs. This review summarises the role of various phytochemicals, plant and herbal extracts or probiotics in promoting human health by mitigating the toxic effects of different HMs.

Phytoremediation capacity of hybrid aspen at sites affected by industry and agriculture

Fast-growing Populus spp. are well-acknowledged to restore contaminated soils from heavy metals in industrial areas. Thus far, there is no knowledge about the phytoremediation capacity of Populus spp. plantations in hemiboreal Estonia conditions to restore industrially polluted areas. The objective of this study was to assess the soil contamination rate of heavy metals (As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb and Zn) and their uptake by mature hybrid aspen (Populus tremula × Populus tremuloides Michx.) in plantations in different industrial pollution areas (e.g. cement factory, oil shale mining). For the reference, industrially polluted plantations were compared with the low pollution area hybrid aspen plantation on former agricultural soil, which was influenced by fertilization and liming before afforestation. Twenty-one years after afforestation, soil samples were collected from the 0-10 cm topsoil layer. Aboveground biomass sampling was performed for bark and stem wood by ingrowth cores to separate wood formed during early (1-10 years) and late (11-21 years) stand development. Two decades after the afforestation of industrially polluted areas, the heavy metal concentrations in the soil were higher than the reference plantation and the standard reference for unpolluted soils in most cases. The highest concentrations of heavy metals in woody biomass were in the oil shale quarry spoil; because of poor growth, the accumulated pools in aboveground biomass were low. Cd differed from other metals and accumulated less in wood and more in bark. The concentration of heavy metals (Cd, Cr, Cu, Fe, Mn, Ni and Zn) was higher in the first decade of stand formation (1-10 years) than in the last 10 years (11-21 years). High pools of heavy metals were accumulated in aboveground biomass in the reference plantation, indicating the considerable removal of heavy metal residues from the previous fertilization and liming source with harvest. Two decades of afforestation with hybrid aspen is too short for complete ecosystem restoration from heavy metals in industrially polluted areas.