Platforms for energy and nutrient recovery from domestic wastewater: A review

Land use/cover drive functional patterns of bacterial communities in sediments of a subtropical river, China

The bacterial community in sediment serves as an important indicator for assessing the environmental health of river ecosystems. However, the response of bacterial community structure and function in river basin sediment to different land use/cover changes has not been widely studied. To characterize changes in the structure, composition, and function of bacterial communities under different types of land use/cover, we studied the bacterial communities and physicochemical properties of the surface sediments of rivers. Surface sediment in cropland and built-up areas was moderately polluted with cadmium and had high nitrogen and phosphorus levels, which disrupted the stability of bacterial communities. Significant differences in the α-diversity of bacterial communities were observed among different types of land use/cover. Bacterial α-diversity and energy sources were greater in woodlands than in cropland and built-up areas. The functional patterns of bacterial communities were shown that phosphorus levels and abundances of pathogenic bacteria and parasites were higher in cropland than in the other land use/cover types; Urban activities have resulted in the loss of the denitrification function and the accumulation of nitrogen in built-up areas, and bacteria in forested and agricultural areas play an important role in nitrogen degradation. Differences in heavy metal and nutrient inputs driven by land use/cover result in variation in the composition, structure, and function of bacterial communities.

Aerobic granulation and resource production under continuous and intermittent saline stress

Three sequential batch reactors (SBR) were operated to evaluate salt addition's impact on granulation, performance, and biopolymer production in aerobic granular sludge (AGS) systems. System R1 was fed without adding salt (control); system R2 operated with saline pulses, i.e., one cycle with salt (2.5 g NaCl/L) addition followed by another without salt; and R3 received continuous supplementation of 2.5 g NaCl/L. The results indicated that the reactors supplemented with salt presented higher concentrations of mixed liquor volatile suspended solids (MLVSS) and better settleability than R1, showing that osmotic pressure contributed to biomass growth, accelerated granulation, and improved physical characteristics. The faster granulation occurred in R2, thus proving the beneficial effects of intermittent salt addition through alternating pulses. Salt addition did not impair the simultaneous removal of carbon, nitrogen, and phosphorus. In fact, R2 showed better carbon removals. In conclusion, continuous or intermittent (pulsed) supplementation of 2.5 g NaCl/L did not lead to increased production of extracellular polymeric substances (EPS) and alginate-like exopolymers (ALE). This outcome could be attributed to the low saline concentration employed, a higher food-to-microorganism (F/M) ratio observed in R1, and possibly greater endogenous consumption of biopolymers in the famine period in R2 and R3 due to the greater solids retention time (SRT). Therefore, this study brings important results that contribute to a better understanding of the effect of salt in continuous dosing or in pulses as a selection pressure strategy to accelerate granulation, as well as the behavior of the AGS systems for saline effluents.

Recent advances in innovative osmotic membranes for resource enrichment and energy production in wastewater treatment

Wastewater is a valuable resource that we can no longer afford to overlook. By recovering the nutrients and metals it contains and generating renewable energy, we can not only meet the rising demands for natural resources but also create a more sustainable and resilient future. Forward osmosis (FO) membranes are one of the most intriguing resource recovery process technologies because of their high organic retention, economical energy usage, and straightforward operation. However, the widespread adoption of FO membranes on a full-scale basis is hindered by several issues with previous membrane products. These include limited selectivity to different types of ions, insufficient water flux, and high susceptibility to membrane fouling during extended periods of operation. Hence, it is essential to either invent new FO membranes or modify the existing ones. The objective of this work is to provide a comprehensive and organized review of up-to-date advancements in the development of innovative osmotic membrane (IOM) materials for resource recovery (RR) and energy production (EP). The paper covers several aspects, including the limitations of current osmotic membrane technologies, a review of new membranes specifically designed for effective RR/EP, their applications in various industrial fields, integrated IOM systems, recent improvements in IOM fabrication processes using artificial intelligence, and a discussion of the challenges and prospects of the potential research. In general, recently developed IOMs have proven to be highly efficient in recovering organics (>99 %), nutrients (>86 %), and precious metals (>90 %). These new membranes have also demonstrated an ability to effectively harvest osmotic energy (with power output ranging from 6 to 38 W/m2) by applied pressure in the range of 8 to 30 bar. These findings suggest that IOMs is promised for efficient resource recovery and renewable energy production.

Biofilm reactors for the treatment of used water in space:potential, challenges, and future perspectives

Water is not only essential to sustain life on Earth, but also is a crucial resource for long-duration deep space exploration and habitation. Current systems in space rely on the resupply of water from Earth, however, as missions get longer and move farther away from Earth, resupply will no longer be a sustainable option. Thus, the development of regenerative reclamation water systems through which useable water can be recovered from "waste streams" (i.e., used waters) is sorely needed to further close the loop in space life support systems. This review presents the origin and characteristics of different used waters generated in space and discusses the intrinsic challenges of developing suitable technologies to treat such streams given the unique constrains of space exploration and habitation (e.g., different gravity conditions, size and weight limitations, compatibility with other systems, etc.). In this review, we discuss the potential use of biological systems, particularly biofilms, as possible alternatives or additions to current technologies for water reclamation and waste treatment in space. The fundamentals of biofilm reactors, their advantages and disadvantages, as well as different reactor configurations and their potential for use and challenges to be incorporated in self-sustaining and regenerative life support systems in long-duration space missions are also discussed. Furthermore, we discuss the possibility to recover value-added products (e.g., biomass, nutrients, water) from used waters and the opportunity to recycle and reuse such products as resources in other life support subsystems (e.g., habitation, waste, air, etc.).

Meta-omic profiling reveals ubiquity of genes encoding for the nitrogen-rich biopolymer cyanophycin in activated sludge microbiomes

Recovering nitrogen (N) from municipal wastewater is a promising approach to prevent nutrient pollution, reduce energy use, and transition toward a circular N bioeconomy, but remains a technologically challenging endeavor. Existing N recovery techniques are optimized for high-strength, low-volume wastewater. Therefore, developing methods to concentrate dilute N from mainstream wastewater will bridge the gap between existing technologies and practical implementation. The N-rich biopolymer cyanophycin is a promising candidate for N bioconcentration due to its pH-tunable solubility characteristics and potential for high levels of accumulation. However, the cyanophycin synthesis pathway is poorly explored in engineered microbiomes. In this study, we analyzed over 3,700 publicly available metagenome assembled genomes (MAGs) and found that the cyanophycin synthesis gene cphA was ubiquitous across common activated sludge bacteria. We found that cphA was present in common phosphorus accumulating organisms (PAO) Ca. 'Accumulibacter' and Tetrasphaera, suggesting potential for simultaneous N and P bioconcentration in the same organisms. Using metatranscriptomic data, we confirmed the expression of cphA in lab-scale bioreactors enriched with PAO. Our findings suggest that cyanophycin synthesis is a ubiquitous metabolic activity in activated sludge microbiomes. The possibility of combined N and P bioconcentration could lower barriers to entry for N recovery, since P concentration by PAO is already a widespread biotechnology in municipal wastewater treatment. We anticipate this work to be a starting point for future evaluations of combined N and P bioaccumulation, with the ultimate goal of advancing widespread adoption of N recovery from municipal wastewater.

Examining current trends and future outlook of bio-electrochemical systems (BES) for nutrient conversion and recovery: an overview

Nutrient-rich waste streams from domestic and industrial sources and the increasing application of synthetic fertilizers have resulted in a huge-scale influx of reactive nitrogen and phosphorus in the environment. The higher concentrations of these pollutants induce eutrophication and foster degradation of aquatic biodiversity. Besides, phosphorus being non-renewable resource is under the risk of rapid depletion. Hence, recovery and reuse of the phosphorus and nitrogen are necessary. Over the years, nutrient recovery, low-carbon energy, and sustainable bioremediation of wastewater have received significant interest. The conventional wastewater treatment technologies have higher energy demand and nutrient removal entails a major cost in the treatment process. For these issues, bio-electrochemical system (BES) has been considered as sustainable and environment friendly wastewater treatment technologies that utilize the energy contained in the wastewater so as to recovery nutrients and purify wastewater. Therefore, this article comprehensively focuses and critically analyzes the potential sources of nutrients, working mechanism of BES, and different nutrient recovery strategies to unlock the upscaling opportunities. Also, economic analysis was done to understand the technical feasibility and potential market value of recovered nutrients. Hence, this review article will be useful in establishing waste management policies and framework along with development of advanced configurations with major emphasis on nutrient recovery rather than removal from the waste stream.

Toward sustainability and resilience in Chilean cities: Lessons and recommendations for air, water, and soil issues

Achieving sustainability and resilience depends on the conciliation of environmental, social, and economic issues integrated into a long-term perspective to ensure communities flourish. Many nations are transitioning toward both objectives, while at the same time addressing structural concerns that have not allowed them to look after the environment in the past. Chile is one of these nations dealing with such challenges within a particular administrative context, an increasing environmental awareness, and a set of unique and complex geophysical boundaries that impose a plethora of hazards for cities, ecosystems, and human health. This paper presents recent accomplishments and gaps, mostly from an environmental perspective, on issues related to air pollution, the urban water cycle, and soil contamination, in the path being followed by Chile toward urban sustainability and resilience. The focus is on the bonds between cities and their geophysical context, as well as the relationships between environmental issues, the built environment, and public health. The description and diagnosis are illustrated using two cities as case studies, Temuco and Copiapó, whose socioeconomic, geographical, and environmental attributes differ considerably. Particulate matter pollution produced by the residential sector, drinking water availability, wastewater treatment, stormwater management, and soil contamination from the mining industry are discussed for these cities. Overall, the case studies highlight how tackling these issues requires coordinated actions in multiple areas, including regulatory, information, and financial incentive measures. Finally, the policy analysis discusses frameworks and opportunities for Chilean cities, which may be of interest when conceiving transitional paths toward sustainability and resilience for other cities elsewhere.

Simple and Low-Cost Electroactive Membranes for Ammonia Recovery

Ammonia is considered a contaminant to be removed from wastewater. However, ammonia is a valuable commodity chemical used as the primary feedstock for fertilizer manufacturing. Here we describe a simple and low-cost ammonia gas stripping membrane capable of recovering ammonia from wastewater. The material is composed of an electrically conducting porous carbon cloth coupled to a porous hydrophobic polypropylene support, that together form an electrically conductive membrane (ECM). When a cathodic potential is applied to the ECM surface, hydroxide ions are produced at the water-ECM interface, which transforms ammonium ions into higher-volatility ammonia that is stripped across the hydrophobic membrane material using an acid-stripping solution. The simple structure, low cost, and easy fabrication process make the ECM an attractive material for ammonia recovery from dilute aqueous streams, such as wastewater. When paired with an anode and immersed into a reactor containing synthetic wastewater (with an acid-stripping solution providing the driving force for ammonia transport), the ECM achieved an ammonia flux of 141.3 ± 14.0 g.cm^-2.day^-1 at a current density of 6.25 mA.cm^-2 (69.2 ± 5.3 kg(NH₃-N)/kWh). It was found that the ammonia flux was sensitive to the current density and acid circulation rate.

Biosolids-derived fertilisers: A review of challenges and opportunities

Soil application of biosolids as an organic fertiliser continues to be a cost-effective way to beneficially utilise its carbon and nutrient contents to maintain soil fertility. However, ongoing concerns over microplastics and persistent organic contaminants means that land-application of biosolids has come under increased scrutiny. To identify a way forward for the ongoing future use of biosolids-derived fertilisers in agriculture, the current work presents a critical review of: (1) contaminants of concern in biosolids and how regulatory approaches can address these to enable on-going beneficial reuse, (2) nutrient contents and bioavailability in biosolids to understand agronomic potential, (3) developments in extractive technologies to preserve and recover nutrients from biosolids before destructive dissipation when the biosolids are thermally processed to deal with persistent contaminants of concern (e.g. microplastics), and (4) use of the recovered nutrients, and the biochar produced by thermal processing, in novel organomineral fertilisers that match specific equipment, crop and soil requirements of broad-acre cropping. Several challenges were identified and recommendations for prioritisation of future research and development are provided to enable safe beneficial reuse of biosolids-derived fertilisers. Opportunities include more efficient technologies to preserve, extract and reuse nutrients from sewage sludge and biosolids, and the production of organomineral fertiliser products with characteristics that enable reliable widespread use across broad-acre agriculture.

Mechanistic assessment reveals the significance of HRT and MLSS concentration in balancing carbon diversion and removal in the A-stage process

Nowadays, the shift toward energy and resource-efficient wastewater treatment plants (WWTPs) has become a necessity rather than a choice. For this purpose, there has been a restored interest in replacing the typical energy and resource-extensive activated sludge process with the two-stage Adsorption/bio-oxidation (A/B) configuration. In the A/B configuration, the role of the A-stage process is to maximize organics diversion to the solids stream and control the following B-stage's influent to allow for the attainment of tangible energy savings. Operating at very short retention times and high loading rates, the influence of the operational conditions on the A-stage process become more tangible than typical activated sludge. Nonetheless, there is very limited understanding of the influence of operational parameters on the A-stage process. Moreover, no studies in the literature have explored the influence of any operational/design parameters on the Alternating Activated Adsorption (AAA) technology which is a novel A-stage variant. Hence, this article mechanistically investigates the independent effect of different operational parameters on the AAA technology. It was inferred that solids retention time (SRT) shall remain below 1 day to allow for energy savings up to 45% and redirecting up to 46% of the influent's COD to the recovery streams. In the meantime, the hydraulic retention time (HRT) can be increased up to 4 h to remove up to 75% of the influent's COD with only 19% decline of the system's COD redirection ability. Moreover, it was observed that the high biomass concentration (above 3000 mg/L) amplified the effect of the sludge poor settleability either due to pin floc settling or high SVI₃₀ which resulted in COD removal below 60%. Meanwhile, the concentration of the extracellular polymeric substances (EPS) was not found to be influenced or to influence process performance. The findings of this study can be employed to formulate an integrative operational approach in which different operational parameters are incorporated to better control the A-stage process and achieve complex objectives.

Fluid-like cathode enhances valuable biomass production from brewery wastewater in purple phototrophic bacteria

The climate crisis requires rethinking wastewater treatment to recover resources, such as nutrients and energy. In this scenario, purple phototrophic bacteria (PPB), the most versatile microorganisms on earth, are a promising alternative to transform the wastewater treatment plant concept into a biorefinery model by producing valuable protein-enriched biomass. PPB are capable of interacting with electrodes, exchanging electrons with electrically conductive materials. In this work, we have explored for mobile-bed (either stirred or fluidized) cathodes to maximize biomass production. For this purpose, stirred-electrode reactors were operated with low-reduced (3.5 e−/C) and high-reduced (5.9 e−/C) wastewater under cathodic polarization (−0.4 V and –0.8 V vs. Ag/AgCl). We observed that cathodic polarization and IR irradiation can play a key role in microbial and phenotypic selection, promoting (at –0.4 V) or minimizing (at –0.8 V) the presence of PPB. Then, we further study how cathodic polarization modulates PPB biomass production providing a fluid-like electrode as part of a so-called photo microbial electrochemical fluidized-bed reactor (photoME-FBR). Our results revealed the impact of reduction status of carbon source in wastewater to select the PPB photoheterotrophic community and how electrodes drive microbial population shifts depending on the reduction status of such carbon source.

Anaerobic Biodegradability of Commercial Bioplastic Products: Systematic Bibliographic Analysis and Critical Assessment of the Latest Advances

Bioplastics have entered everyday life as a potential sustainable substitute for commodity plastics. However, still further progress should be made to clarify their degradation behavior under controlled and uncontrolled conditions. The wide array of biopolymers and commercial blends available make predicting the biodegradation degree and kinetics quite a complex issue that requires specific knowledge of the multiple factors affecting the degradation process. This paper summarizes the main scientific literature on anaerobic digestion of biodegradable plastics through a general bibliographic analysis and a more detailed discussion of specific results from relevant experimental studies. The critical analysis of literature data initially included 275 scientific references, which were then screened for duplication/pertinence/relevance. The screened references were analyzed to derive some general features of the research profile, trends, and evolution in the field of anaerobic biodegradation of bioplastics. The second stage of the analysis involved extracting detailed results about bioplastic degradability under anaerobic conditions by screening analytical and performance data on biodegradation performance for different types of bioplastic products and different anaerobic biodegradation conditions, with a particular emphasis on the most recent data. A critical overview of existing biopolymers is presented, along with their properties and degradation mechanisms and the operating parameters influencing/enhancing the degradation process under anaerobic conditions.

Energy and material refineries of future: Wastewater treatment plants

There have been many important milestones on humanity's long journey towards achieving environmental sanitation. In particular, the development of the activated sludge system can be claimed to be one of the most groundbreaking advances in the protection of both public health and the wider ecosystem. The first wastewater treatment plants (WWTPs) were developed over a century ago and were soon configured for use with activated sludge. However, despite their long history and service, conventional activated sludge (CAS) plants have become an unsustainable method of wastewater treatment. In addition, conventional WWTPs are intensive energy-consumers and at best allow only very limited material recovery. A paradigm shift to convert existing WWTPs into more sustainable facilities must therefore be considered necessary and to this end the wastewater biorefinery (WWBR) concept may be considered a solution that maximizes both energy and material recovery, in line with the circular economy approach.

Expanding mechanistic models to represent purple phototrophic bacteria enriched cultures growing outdoors

The economic feasibility of purple phototrophic bacteria (PPB) for resource recovery relies on using enriched-mixed cultures and sunlight. This work presents an extended Photo-Anaerobic Model (ePAnM), considering: (i) the diverse metabolic capabilities of PPB, (ii) microbial clades interacting with PPB, and (iii) varying environmental conditions. Key kinetic and stoichiometric parameters were either determined experimentally (with dedicated tests), calculated, or gathered from literature. The model was calibrated and validated using different datasets from an outdoors demonstration-scale reactor, as well as results from aerobic and anaerobic batch tests. The ePAnM was able to predict the concentrations of key compounds/components (e.g., COD, volatile fatty acids, and nutrients), as well as microbial communities (with anaerobic systems dominated by fermenters and PPB). The results underlined the importance of considering other microbial clades and varying environmental conditions. The model predicted a minimum hydraulic retention time of 0.5 d^-1. A maximum width of 10 cm in flat plate reactors should not be exceeded. Simulations showed the potential of a combined day-anaerobic/night-aerobic operational strategy to allow efficient continuous operation.

Macro-nutrients recovery from liquid waste as a sustainable resource for production of recovered mineral fertilizer: Uncovering alternative options to sustain global food security cost-effectively

Global food security, which has emerged as one of the sustainability challenges, impacts every country. As food cannot be generated without involving nutrients, research has intensified recently to recover unused nutrients from waste streams. As a finite resource, phosphorus (P) is largely wasted. This work critically reviews the technical applicability of various water technologies to recover macro-nutrients such as P, N, and K from wastewater. Struvite precipitation, adsorption, ion exchange, and membrane filtration are applied for nutrient recovery. Technological strengths and drawbacks in their applications are evaluated and compared. Their operational conditions such as pH, dose required, initial nutrient concentration, and treatment performance are presented. Cost-effectiveness of the technologies for P or N recovery is also elaborated. It is evident from a literature survey of 310 published studies (1985-2022) that no single technique can effectively and universally recover target macro-nutrients from liquid waste. Struvite precipitation is commonly used to recover over 95 % of P from sludge digestate with its concentration ranging from 200 to 4000 mg/L. The recovered precipitate can be reused as a fertilizer due to its high content of P and N. Phosphate removal of higher than 80 % can be achieved by struvite precipitation when the molar ratio of Mg²⁺/PO₄^3- ranges between 1.1 and 1.3. The applications of artificial intelligence (AI) to collect data on critical parameters control optimization, improve treatment effectiveness, and facilitate water utilities to upscale water treatment plants. Such infrastructure in the plants could enable the recovered materials to be reused to sustain food security. As nutrient recovery is crucial in wastewater treatment, water treatment plant operators need to consider (1) the costs of nutrient recovery techniques; (2) their applicability; (3) their benefits and implications. It is essential to note that the treatment cost of P and/or N-laden wastewater depends on the process applied and local conditions.

Improvement of biogas production and nitrogen recovery in anaerobic digestion of purple phototrophic bacteria by thermal hydrolysis

Purple phototrophic bacteria (PPB) are a novel driver to recover organics and nutrients from wastewater by assimilative growth. Depending on the source, assimilated resources from the PPB biomass can still be recovered after a releasing step. Anaerobic digestion (AD) releases carbonand nutrients, but the release is incomplete. Thermal hydrolysis (TH) as a pretreatment before AD improves the digestibility, release, and subsequent recovery potentials. This work determines the effects of TH in batch and continuous modes regarding methane potential, nutrients' release efficiencies, volatile solids destruction, degradability, and hydrolysis rates. Continuous runs over 165 days (d) confirmed enhanced recovery potentials, achieving up to 380 LCH₄/kgVS (83 % solids destruction) and 73 % N release, respectively. The TH pretreatment is energy-intensive, but with appropriate heat recovery and increased methane production in the AD of the pretreated biomass, a combined configuration is energy positive.

Short sludge age denitrification as alternative process for energy and nutrient recovery

High rate activated sludge (HRAS) systems redirect organics into highly biodegradable sludge and nutrients into microbial proteins. This study evaluates anoxic HRAS for nitrogen and carbon recovery. The reactor treated synthetic wastewater at solids retention times (SRTs) of 5, 3 and 1 days. Denitrification rates varied between 0.15 and 0.19 g-NO₃-N g-TSS^-1 d^-1 (total suspended solids per day) and all conditions showed favourable settling. The highest sludge yield, obtained at SRT 1 d, was 0.75 g-TSS g-COD_removed^-1, double that observed for aerobic HRAS. The highest methane yield (322 mL-CH₄ g-VS_sludge^-1) was obtained from sludge wasted at 3 d SRT. Both 1 d and 3 d SRTs showed favourable energy recovery, with 14 % of the organics recovered as methane. All conditions yielded sludge with protein content ranging between 24 and 27 % of dry weight and similar amino acid profile, comparable to traditional proteins. Thus, denitrifying HRAS recovers resources as its aerobic counterpart, allowing for nitrogen removal via denitrification, more stable compared to mainstream partial nitritation anammox typically combined with aerobic HRAS.

Valorization of wastewater: A paradigm shift towards circular bioeconomy and sustainability

Limitation in the availability of natural resources like water is the main drive for focussing on resource recovery from wastewater. Rapid urbanization with increased consumption of natural resources has severely affected its management and security. The application of biotechnological processes offers a feasible approach to concentrating and transforming wastewater for resource recovery and a step towards a circular economy. Wastewater generally contains high organic materials, nutrients, metals and chemicals, which have economic value. Hence, its management can be a valuable resource through the implementation of a paradigm transformation for value-added product recovery. This review focuses on the circular economy of "close loop" process by wastewater reuse and energy recovery identifying the emerging technologies for recovering resources across the wastewater treatment phase. Conventional wastewater treatment technologies have been discussed along with the advanced treatment technologies such as algal treatment, anammox technology, microbial fuel cells (MFC). Apart from recovering energy in the form of biogas and biohydrogen, second and third-generation biofuels as well as biohythane and electricity generation have been deliberated. Other options for resource recovery are single-cell protein (SCP), biopolymers as well as recovery of metals and nutrients. The paper also highlights the applications of treated wastewater in agriculture, aquaponics, fisheries and algal cultivation. The concept of Partitions-release-recover (PRR) has been discussed for a better understanding of the filtration treatment coupled with anaerobic digestion. The review provides a critical evaluation on the importance of adopting a circular economy and their role in achieving sustainable development goals (SDGs). Thus, it is imperative that such initiatives towards resource recovery from wastewater through integration of concepts can aid in providing wastewater treatment system with resource efficiency.

Ammonia recovery from anaerobic digester centrate using onsite pilot scale bipolar membrane electrodialysis coupled to membrane stripping

Ammonia recovery from centrate of an anaerobic digester was investigated using an onsite bipolar-electrodialysis (BP-ED) pilot scale plant coupled to two liquid/liquid membrane contactor (LLMC) modules. To investigate the process performance and robustness, the pilot plant was operated at varying current densities, load ratio (current to nitrogen loading), and in continuous and intermittent current (Donnan) mode. A higher load ratio led to higher total ammonium nitrogen (TAN, sum of ammonia and ammonium) removal efficiency, whereas the increase in the applied current did not have a significant impact the TAN removal efficiency. Continuous current application resulted in the higher TAN removal compared with the Donnan dialysis mode. The lowest specific energy consumption of 6.3 kWh kg_N^-1 was recorded in the Donnan mode, with the load ratio of 1.4, at 200 L h^-1 flowrate and current density of 75 A m^-2. Lower energy demand observed in the Donnan mode was likely due to the lower scaling and fouling of the ion exchange membranes. Nevertheless, scaling and fouling limited the operation of the BP-ED stack in all operational modes, which had to be interrupted by the daily cleaning procedures. The LLMC module enabled a highly selective recovery of ammonia as ammonium sulfate ((NH₄)₂SO₄), with the concentration of ammonia ranging from 19 to 33 g_N L^-1. However, the analysis of per- and polyfluoroalkyl substances (PFASs) in the obtained (NH₄)₂SO₄ product revealed the presence of 212-253 ng L^-1 of 6:2 fluorotelomer sulfonate (FTS), a common substitute of legacy PFAS. Given the very low concentrations of 6:2 FTS (i.e., < 2 ng L^-1) encountered in the concentrated stream, 6:2 FTS was likely released from the Teflon-based components in the sulfuric acid dosage line. Thus, careful selection of the pilot plant tubing, pumps and other components is required to avoid any risks associated with the PFAS presence and ensure safe use of the final product as fertilizer.

Wastewater Primary Treatment Using Forward Osmosis Introduces Inhibition to Achieve Stable Mainstream Partial Nitrification

Achieving stable long-term mainstream nitrite oxidizing bacteria (NOB) suppression is the bottleneck for the novel partial nitrification (PN) process toward energy- and carbon-efficient wastewater treatment. However, long-term PN stability remains a challenge due to NOB adaptation. This study proposed and demonstrated a novel strategy for achieving NOB suppression by the primary treatment of mainstream wastewater with a forward osmosis (FO) membrane process, which facilitated two external NOB inhibition factors (salinity and free nitrous acid, FNA). To evaluate the proposed strategy, a lab-scale sequencing batch reactor was operated for 200 days. A stable PN operation was achieved with a nitrite accumulation ratio of 97.7 ± 2.8%. NOB were suppressed under the combined inhibition effect of NaCl (7.9 ± 0.2 g/L, as introduced by the FO direct filtration) and FNA (0.11 ± 0.02 mg of HNO₂-N/L, formed as a result of the increased NH₄⁺-N concentration after the FO process). The two inhibition factors worked in synergy to achieve a more stable PN operation. The microbial analysis showed that the elevated salinity and accumulation of FNA reshaped the microbial community and selectively eliminated NOB. Finally, an economic and feasibility analysis was conducted, which suggests that the integration of an FO unit into PN/A is a feasible and economically viable wastewater treatment process.

Material biosynthesis, mechanism regulation and resource recycling of biomass and high-value substances from wastewater treatment by photosynthetic bacteria: A review

The environmental-friendly and economic benefits generated from photosynthetic bacteria (PSB) wastewater treatment have attracted significant attention. This process of resource recovery can produce PSB biomass and high-value substances including single cell protein, Coenzyme Q₁₀, polyhydroxyalkanoates (PHA), 5-aminolevulinic acid, carotenoids, bacteriocin, and polyhydroxy chain alkyl esters, etc. for application in various fields, such as agriculture, medical treatment, chemical, animal husbandry and food industry while treating wastewaters. The main contents of this review are summarized as follows: physiological characteristics, mechanism and application of PSB and potential of single cell protein (SCP) production are described; PSB wastewater treatment technology, including procedures and characteristics, typical cases, influencing factors and bioresource recovery by membrane bioreactor are detailed systematically. The future development of PSB-based resource recovery and wastewater treatment are also provided, particularly concerning PSB-membrane reactor (MBR) process, regulation of biosynthesis mechanism of high-value substances and downstream separation and purification technology. This will provide a promising and new alternative for wastewater treatment recycling.

Forward-Looking Roadmaps for Long-Term Continuous Water Quality Monitoring: Bottlenecks, Innovations, and Prospects in a Critical Review

Long-term continuous monitoring (LTCM) of water quality can bring far-reaching influences on water ecosystems by providing spatiotemporal data sets of diverse parameters and enabling operation of water and wastewater treatment processes in an energy-saving and cost-effective manner. However, current water monitoring technologies are deficient for long-term accuracy in data collection and processing capability. Inadequate LTCM data impedes water quality assessment and hinders the stakeholders and decision makers from foreseeing emerging problems and executing efficient control methodologies. To tackle this challenge, this review provides a forward-looking roadmap highlighting vital innovations toward LTCM, and elaborates on the impacts of LTCM through a three-hierarchy perspective: data, parameters, and systems. First, we demonstrate the critical needs and challenges of LTCM in natural resource water, drinking water, and wastewater systems, and differentiate LTCM from existing short-term and discrete monitoring techniques. We then elucidate three steps to achieve LTCM in water systems, consisting of data acquisition (water sensors), data processing (machine learning algorithms), and data application (with modeling and process control as two examples). Finally, we explore future opportunities of LTCM in four key domains, water, energy, sensing, and data, and underscore strategies to transfer scientific discoveries to general end-users.

Naturally illuminated photobioreactors for resource recovery from piggery and chicken-processing wastewaters utilising purple phototrophic bacteria

Resource recovery from wastewater, preferably as high value products, has become an integral part of modern wastewater treatment. This work presents the potential to produce single cell protein (SCP) from pre-settled piggery wastewater (PWW) and meat chicken processing wastewater (CWW), utilising anaerobic purple phototrophic bacteria (PPB). PPB were grown as biofilm in outdoors 60 L, 80 L and 100 L flat-plate reactors, operated in sequential batch mode. PPB biofilm was recovered from reactor walls at a total solid (TS) content ∼90 g•L - 1, and the harvested biomass (depending on the wastewater) had a consistent quality, with high protein contents (50-65%) and low ash, potentially applicable as SCP. The COD, N and P removal efficiencies were 71±5.3%, 22±6.6%, 65±5.6% for PWW and 78±1.8%, 67±2.7% and 37±4.0% for CWW, respectively, with biofilm areal productivities up to 14 g TS•m - 2•d - 1. This was achieved at ammonium-N concentrations over 1.0 g•L - 1 and temperatures up to 55 °C and down to 6 °C (daily fluctuations of 20-30 °C). The removal performances and biomass productivities were mostly dependent on the bioavailable COD in the form of volatile fatty acids (VFA). At sufficient VFA availability, the irradiance became limiting, capping biofilm formation. Harvesting of the suspended fraction resulted in increased productivities and recovery efficiencies, but lowered the product quality (e.g., containing undesired inerts). The optimum between quantity and quality of product is dependent on the wastewater characteristics (i.e., organic degradable fraction) and potential pre-treatment. This study shows the potential to utilise sunlight to treat agri-industrial wastewaters while generating protein-rich PPB biomass to be used as a feed, feed additive or feed supplement.

Comparison of three anaerobic digestion reactors for low-carbon wastewater treatment

In this study, three anaerobic digestion reactors using up-flow anaerobic sludge blanket (UASB), anaerobic sequencing batch reactor (AnSBR), and anaerobic membrane bioreactor (AnMBR) were studied. The chemical oxygen demand (COD), gas production, sludge performance, and microbial characteristics of the anaerobic digestion process were assessed. The results showed that the average COD removal efficiencies reached 86%, 83%, and 85%, with corresponding removed rates of 2.49, 0.48, and 0.79 kg COD m-3 d-1 in UASB, AnSBR, and AnMBR, respectively. After the reactors attained stable operation, both extracellular polymeric substances and soluble microbial products decreased in all the reactors compared with the seed sludge. Methanothrix was the dominant archaea for methane production in the UASB, the relative abundance of which increased from 58.3% to 83.4%. These results identify UASB as the most suitable reactor for anaerobic digestion when treating wastewater with low carbon. Such reactors are important for the application and development of the energy self-sufficiency in sewage treatment. PRACTITIONER POINTS: UASB, SBR, and MBR were adopted to treat low-carbon wastewater using anaerobic digestion process. UASB performed the highest COD removal from low-carbon wastewater. The main microorganisms in UASB were Methanothrix, Methanomassiliicoccus, and Methanobacterium.

Dynamic Membranes for Enhancing Resources Recovery from Municipal Wastewater

This paper studied the feasibility of using dynamic membranes (DMs) to treat municipal wastewater (MWW). Effluent from the primary settler of a full-scale wastewater treatment plant was treated using a flat 1 µm pore size open monofilament polyamide woven mesh as supporting material. Two supporting material layers were required to self-form a DM in the short-term (17 days of operation). Different strategies (increasing the filtration flux, increasing the concentration of operating solids and coagulant dosing) were used to enhance the required forming time and pollutant capture efficiency. Higher permeate flux and increased solids were shown to be ineffective while coagulant dosing showed improvements in both the required DM forming time and permeate quality. When coagulant was dosed (10 mg L⁻¹) a DM forming time of 7 days and a permeate quality of total suspended solids, chemical oxygen demand, total nitrogen, total phosphorous and turbidity of 24 mg L⁻¹, 58 mg L⁻¹, 38.1 mg L⁻¹, 1.2 mg L⁻¹ and 22 NTU, respectively, was achieved. Preliminary energy and economic balances determined that energy recoveries from 0.032 to 0.121 kWh per m³ of treated water at a cost between €0.002 to €0.003 per m³ of treated water can be obtained from the particulate material recovered in the DM.

Environmental performance of dewatered sewage sludge digestate utilization based on life cycle assessment

Due to the global trend of urbanization, the amount of sewage water is increasing in cities. This calls for efficient treatment of the resulting sewage sludge. To date, in the 27 European Union member countries (EU-27), the prevailing treatment method is application on arable land. Anaerobic digestion is one of the treatment methods being increasingly used nowadays. However, the resulting digestate requires further utilization. Therefore, in this study, the environmental performance of composting, combustion, and pyrolysis options for dewatered sewage sludge digestate is evaluated based on a life cycle assessment. The results show that digestate combustion and composting performed better than pyrolysis for most of the selected impact categories. However, pyrolysis of sewage sludge is still under development, and there are, to some degree, uncertainties in the data related to this technology; thus, more information for the performance assessment of pyrolysis is still required.

Overcoming organic matter limitation enables high nutrient recovery from sewage sludge reject water in a self-powered microbial nutrient recovery cell

In order to meet the global demand of fertilizers for food production, there is an urgent need to recover macronutrients (such as NH₄⁺, PO₄^3-, Ca²⁺, K⁺, and Mg²⁺) from non-conventional sources (e.g., waste streams). Sludge reject water - a by-product produced during the dewatering of anaerobically-stabilized sewage sludge - is considered an ideal feedstock for bioelectrochemical nutrient recovery due to its high nutrient content. However, its low readily available organic matter and alkalinity usually limit electric current generation, resulting in low nutrient recovery. Here, we designed and operated self-powered microbial nutrient recovery cells (MNRCs) to test whether or not the addition of high-strength livestock wastewater could improve the macronutrients recovery from sludge reject water into a liquid concentrate. MNRCs fed with sludge reject water exhibited a low current density generation of 0.98 ± 0.31 A/m³ with approximately 24 ± 2% reduction in chemical oxygen demand (COD) concentration. The NH₄⁺ removal was only 37.1 ± 11% with an up-concentration factor of ~0.43 ± 0.15. Macronutrients recovery and up-concentration were optimized by mixing sludge reject water with livestock wastewater, which its content varied from 10 to 30%. Consequently, the current output and NH₄⁺ up-concentration factor were remarkably increased, peaking at 14.10 ± 1.14 A/m³ and 2.19 ± 0.51, respectively, for MNRCs fed with sludge reject water:livestock wastewater = 70%:30% (v:v). Detailed analysis of the liquid concentrate revealed that it could be efficiently used as a liquid fertilizer to replace chemical fertilizers with comparable agricultural productivity at a lower cost. These results suggest that the MNRC can promote self-powered, chemical-free macronutrients recovery from sludge reject water (and other low-strength wastewater, too) by controlling the availability of organic matter in waste streams.

First proof of concept for full-scale, direct, low-temperature anaerobic treatment of municipal wastewater

Municipal wastewater constitutes the largest fraction of wastewater, and yet treatment processes are largely removal-based. High-rate anaerobic digestion (AD) has revolutionised the sustainability of industrial wastewater treatment and could additionally provide an alternative for municipal wastewater. While AD of dilute municipal wastewater is common in tropical regions, the low temperatures of temperate climates has resulted in slow uptake. Here, we demonstrate for the first time, direct, high-rate, low-temperature AD of low-strength municipal wastewater at full-scale. An 88 m³ hybrid reactor was installed at the municipal wastewater treatment plant in Builth Wells, UK and operated for 290 days. Ambient temperatures ranged from 2 to 18 °C, but remained below 15 °C for > 100 days. Influent BOD fluctuated between 2 and 200 mg L^-1. However, BOD removal often reached > 85%. 16S rRNA amplicon sequencing of DNA from the biomass revealed a highly adaptable core microbiome. These findings could provide the basis for the next-generation of municipal wastewater treatment.

Industrial wastewater treatment: Current trends, bottlenecks, and best practices

Rapid urbanization and industrialization have inextricably linked to water consumption and wastewater generation. Mining resources from industrial wastewater has proved to be an excellent source of secondary raw materials i.e., proficient for providing economic and financial benefits, clean and sustainable resilient environment, and achieving sustainable development goals (SDGs). Treatment of industrial wastewater for reusable resources has become a tedious task for decision-makers due to several bottlenecks and barriers, such as inefficient treatment options, high-cost expenditure, poor infrastructure, lack of financial support, and technical know-how. Most of the existing methods are conventional and fails to provide an economic benefit to the industries and have certain disadvantages. Also, the untreated industrial wastewater is discharged into the open drains, lakes, and rivers that lead to environmental pollution and severe health hazards. This paper has consolidated information about the current trends, opportunities, bottlenecks, and best practices associated with wastewater treatment and scope for the advancement in the existing technologies. Along with the efficient resource recovery, the wastewater could be ideally explored in the development of value-added materials, energy, and product recovery. The concepts, such as the circular economy (CE), partitions-release-recover (PRR), and transforming wastewater into bio factory are anticipated to be more convenient options to tackle the industrial wastewater menace.

Technical, economic and environmental feasibility of resource recovery technologies from wastewater

An enormous amount of wastewater is generated across the world from different industrial or municipal sectors. Traditional wastewater treatment plants (WWTP) have primarily focused on the treatment of wastewater rather than the recovery of valuable resources. A shift from a linear to a circular economy may offer a unique platform for recovering valuable resources including energy, nutrients, and high-value goods from wastewater. However, transitioning from conventional frameworks to sustainable WWT systems remains a significant challenge. Thus, this review paper focuses on the avenues of resource recovery from WWTPs, by evaluating the potential for nutrients, water, and energy recovery from different types of wastewaters and sewage sludge. It discusses in detail a variety of available and advanced technologies for resource recovery. Further, the feasibility of these technologies from a sustainable standpoint is discussed, covering the technical, economic, and environmental facets.

Ammonia recovery from simulated anaerobic digestate using a two-stage direct contact membrane distillation process

Ammonia is a key inorganic contaminant in wastewater and an important nutrient element for agriculture. Herein, a two-stage direct contact membrane distillation (DCMD) system was developed and investigated for ammonia recovery from a synthetic anaerobic digestate. In the 1st stage DCMD (DCMD-1), both ammonia and water moved across MD membrane to realize ammonia separation, while in the 2nd stage (DCMD-2), only water migrated and as a result ammonia was concentrated. It was found that increasing the initial feed solution pH could enhance ammonia removal in the DCMD-1 from 16.0 ± 2.0% (no pH adjustment) to 84.2 ± 1.9% (pH 12). A higher feed solution temperature increased both ammonia flux and water flux. The optimal condition was determined as an initial feed pH of 12, a feed temperature of 60°C, and the 0.6 M H₂ SO₄ adsorption solution. With the addition of the DCMD-2, the ammonia concentration was improved from 3 g L^-1 to 7.8 ± 0.2 g L^-1 , which was further enhanced to 26.3 ± 3.0 g L^-1 after five batches of operation. These results have demonstrated the feasibility of a two-stage DCMD system for ammonia recovery from anaerobic digestate and warrant further investigation of several key issues that may advance this technology. PRACTITIONER POINTS: A two-stage membrane distillation system is developed to remove and recover ammonia from anaerobic digester effluents. The system uses ammonia/ammonium equilibrium to separate ammonia in the 1st stage and then concentrate it in the 2nd stage. A high initial pH of the feed solution plays a key role in achieving high ammonia removal. Minimizing the volume of permeate solution can increase the ammonia concentration.

Integrated review of resource recovery on aerobic granular sludge systems: Possibilities and challenges for the application of the biorefinery concept

Aerobic Granular Sludge (AGS) is a biological treatment technology that has been extensively studied in the last decade. The possibility of resource recovery has always been highlighted in these systems, but real-scale applications are still scarce. Therefore, this paper aimed to present a systematic review of resources recovery such as water, energy, chemicals, raw materials, and nutrients from AGS systems, also analyzing aspects of engineering and economic viability. In the solid phase, sludge application in agriculture is an interesting possibility. However, the biosolids' metal concentration (the granules have high adsorption capacity due to the high concentration of extracellular polymeric substances, EPS) may be an issue. Another possibility is the recovery of Polyhydroxyalkanoates (PHAs) and Alginate-like exopolymers (bio-ALE) in the solid phase, emphasizing the last one, which has already been made in some Wastewater Treatment Plants (WWTPs), named and patented as Kaumera® process. The Operational Expenditure (OPEX) can be reduced by 50% in the WWTP when recovery of ALE is made. The ALE recovery reduced sludge yield by up to 35%, less CO₂ emissions, and energy saving. Finally, the discharged sludge can also be evaluated to be used for energetic purposes via anaerobic digestion (AD) or combustion. However, the AD route has faced difficulties due to the low biodegradability of aerobic granules.

Circular economy-driven ammonium recovery from municipal wastewater: State of the art, challenges and solutions forward

In current biological nitrogen removal (BNR) processes, most of ammonium in municipal wastewater is biologically transformed to nitrogen gas, making ammonium recovery impossible. Thus, this article aims to provide a holistic review with in-depth discussions on (i) current BNR processes for municipal wastewater treatment, (ii) environmental and economic costs behind ammonium in municipal wastewater, (iii) state of the art of ammonium recovery from municipal wastewater including anaerobic membrane bioreactor turning municipal wastewater to a liquid fertilizer, capturing ammonium in phototrophic biomass, waste activated sludge for land application, bioelectrochemical systems, biological conversion of ammonium to nitrous oxide as a fuel oxidizer, and adsorption, (iv) feasibility and challenge of adsorption for ammonium recovery from municipal wastewater and (v) innovative municipal wastewater reclamation processes coupled with ammonium recovery. Moving forward, municipal wastewater reclamation and resource recovery should be addressed under the framework of circular economy.

Onset Investigation on Dynamic Change of Biohythane Generation and Microbial Structure in Dual-chamber versus Single-chamber Microbial Electrolysis Cells

Biohythane is alternative fuel to replace fossil fuel for car combustion, and biohythane generation could be potential pathway for energy recovery from wastewater treatment. Microbial electrolysis cell (MEC) is electrochemical technique to convert waste to methane and hydrogen gas for biohythane generation, but the feasibility and stability of MEC needs further investigation to assure sustainable energy recovery. System configuration is paramount factor for electrochemical reaction and mass transfer, and this study was to investigate the configuration impact (single vs dual chamber) of MEC for biohythane generation rate and stability. This study showed that dual-chamber MEC could separate methane and hydrogen gas production in the anode and cathode, and combined both together to produce biohythane. To reduce ohmic resistance for higher current, cation exchange membrane (CEM) was removed from dual-chamber to single-chamber MEC. However, free hydrogen diffusion was allowed in the single chamber since CEM was removed. The diffused hydrogen and substrate towards the cathode would favor the methanogen growth, and thus the hydrogen was consumed to reduce the biohythane generation and energy recovery efficiency (i.e., 7.5 × 10^-3 reduced to 5.7 × 10^-3 kWh kg^-1 degraded COD day^-1 after converting dual-chamber to single-chamber MEC). Absolute abundance of methanogen in single-chamber MEC was greatly boosted, as Methanosarcina and Methanobacteriale on the anode surface, increased by 132% and 243%, respectively, while the original dual-chamber MEC could maintain Geobacter growth for high current generation. This is the keystone study to demonstrate the importance of dual-chamber MEC for the feasibility and stability for the biohythane generation, building up the foundation to use electrochemical device to convert the organic waste to the alternative biohythane.

Advanced near-zero waste treatment of food processing wastewater with water, carbon, and nutrient recovery

A near-zero waste treatment system for food processing wastewater was developed and studied. The wastewater was treated using an anaerobic membrane bioreactor (AnMBR), polished using an outdoor photobioreactor for microalgae cultivation (three species were studied), and excess sludge was treated using hydrothermal carbonization. The study was conducted under arid climate conditions for one year (four seasons). The AnMBR reduced the total organic carbon by 97%, which was mostly recovered as methane (~57%) and hydrochar (~4%). Microalgal biomass productivity in the AnMBR effluent ranged from 0.25 to 0.8 g·L^-1·day^-1. Nitrogen (N) and phosphorous (P) uptake varied seasonally, from 18 to 45 mg·L^-1·day^-1 and up to 5 mg·L^-1·day^-1, respectively. N and P mass balance analysis demonstrated that the process was highly efficient in the recovery of nitrogen (~77%), and phosphorus (~91%). The performance of the microalgal culture changed among seasons because of climatic variation, as a result of variation in the wastewater chemistry, and possibly due to differences among the microalgal species. Effluent standards for irrigation use were met throughout the year and were achieved within two days in summer and 4.5 days in winter. Overall, the study demonstrated a near-zero waste discharge system capable of producing high-quality effluent, achieving nutrient and carbon recovery into microalgae biomass, and energy production as biogas and hydrochar.

Resource recovery in aerobic granular sludge systems: is it feasible or still a long way to go?

Lately, wastewater treatment plants are much often being designed as wastewater-resource factories inserted in circular cities. Among biological treatment technologies, aerobic granular sludge (AGS), considered an evolution of activated sludge (AS), has received great attention regarding its resource recovery potential. This review presents the state-of-the-art concerning the influence of operational parameters on the recovery of alginate-like exopolysaccharides (ALE), tryptophan, phosphorus, and polyhydroxyalkanoates (PHA) from AGS systems. The carbon to nitrogen ratio was identified as a parameter that plays an important role for the optimal production of ALE, tryptophan, and PHA. The sludge retention time effect is more pronounced for the production of ALE and tryptophan. Additionally, salinity levels in the bioreactors can potentially be manipulated to increase ALE and phosphorus yields simultaneously. Some existing knowledge gaps in the scientific literature concerning the recovery of these resources from AGS were also identified. Regarding industrial applications, tryptophan has the longest way to go. On the other hand, ALE production/recovery could be considered the most mature process if we take into account that existing alternatives for phosphorus and PHA production/recovery are optimized for activated sludge rather than granular sludge. Consequently, to maintain the same effectiveness, these processes likely could not be applied to AGS without undergoing some modification. Therefore, investigating to what extent these adaptations are necessary and designing alternatives is essential.

Editorial: Let's talk about P(ee)

Phosphorus recycling and reuse are imperative, and the water industry has an important role to play in this effort. Technologies capable of removing phosphorus to ultra-low levels and subsequent recovery for phosphorus reuse are needed. Inorganic ion exchange resins and organic bioadsorbents are promising for phosphorus removal and recovery as part of the waste-to-resource paradigm.

The war using microbes: A sustainable approach for wastewater management

Anthropogenic activities and population growth have resulted in a reduced availability of drinking water. To ensure consistency in the existence of drinking water, it is inevitable to establish wastewater treatment plants (WWTPs). 70% of India's rural population was found to be without WWTP, waste disposal, and good sanitation. Wastewater has emerged from kitchens, washrooms, etc., with industry activities. This scenario caused severe damage to water resources, leading to degradation of water quality and pathogenic insects. Thus, it is a need of an hour to prompt for better WWTPs for both rural and urban areas. Many parts of the world have started to face severe water shortages in recent years, and wastewater reuse methods need to be updated. Clean water supply is not enough to satisfy the needs of the planet as a whole, and the majority of freshwater in the polar regions takes the form of ice and snow. The increasing population requires clean water for drinks, hygiene, irrigation, and various other applications. Lack of water and contamination of water result from human activities. 90% of wastewater is released to water systems without treatment in developing countries. Studies show that about 730 megatons of waste are annually discharged into water from sewages and other effluents. The sustenance of water resources, applying wastewater treatment technologies, and calling down the percentage of potable water has to be strictly guided by mankind. This review compares the treatment of domestic sewage to its working conditions, energy efficiency, etc. In this review, several treatment methods with different mechanisms involved in waste treatment, industrial effluents, recovery/recycling were discussed. The feasibility of bioaugmentation should eventually be tested through data from field implementation as an important technological challenge, and this analysis identifies many promising areas to be explored in the future.

Fit-for-Purpose Design of Nanofiltration Membranes for Simultaneous Nutrient Recovery and Micropollutant Removal

Domestic wastewater is a valuable reservoir of nutrients such as nitrogen and phosphorus. However, the presence of emerging micropollutants (EMPs) hinders its applications in resource recovery. In this study, we designed and fabricated a novel thin-film composite polyamide membrane, which enables highly selective nanofiltration (NF) that removes EMPs effectively while preserving valuable nutrients in the permeate. By incorporating polyethylenimine as an additional monomer to piperazine and surfactant sodium dodecyl sulfate in interfacial polymerization, we precisely tuned membrane pore size, pore size distribution, and surface charge. The resultant NF membrane achieved desirable solute-solute selectivity between EMPs (rejection rate > 75%) and nutrient N and P ions (rejection rate < 25%). By applying a modified Donnan steric pore model with dielectric exclusion, which takes membrane pore size distribution into consideration, we demonstrate the synergistic effect of membrane pore size, pore size distribution, and surface charge in regulating membrane solute-solute selectivity. Designing solute-solute selective NF membranes for fit-for-purpose wastewater treatment has great potential to improve the flexibility of membrane technologies that can convert wastewater streams to valuable water and nutrient resources.

Graphene-Based Composites for Phosphate Removal

A variety of methods, including chemical precipitation, biological phosphorus elimination, and adsorption, have been described to effectively eliminate phosphorus (P) in the form of phosphate (PO₄ ^3-) from wastewater sources. Adsorption is a simple and easy method. It shows excellent removal performance, cost effectiveness, and the substantial option of adsorbent materials. Therefore, it has been recognized as a practical, environmentally friendly, and reliable treatment method for eliminating P. Nanocomposites have been deployed to remove P from wastewater via adsorption. Nanocomposites offer low-temperature alteration, high specific surface area, adjustable surface chemistry, pore size, many adsorption sites, and rapid intraparticle diffusion distances. In this Mini-Review, we have aimed to summarize the last eight years of progress in P removal using graphene-based composites via adsorption. Ultimately, future perspectives have been presented to boost the progress of this encouraging field.

Assessment of sludge management strategies in wastewater treatment systems using a plant-wide approach

The objective of this paper is to use plant-wide modeling to assess the net impacts of varying sludge management strategies. Special emphasis is placed on effluent quality, operational cost and potential resource recovery (energy, nutrients). The study is particularly focused on a centralized bio-solids beneficiation facility (BBF), which enables larger, more capital intensive sludge management strategies. Potential barriers include the ability to process reject streams from multiple donor plants in the host plant. Cape Flats (CF) wastewater treatment works (WWTW) (Cape Town, South Africa) was used as a relevant test case since it is currently assessing to process sludge cake from three nearby facilities (Athlone, Mitchells Plain and Wildevoelvlei). A plant-wide model based on the Benchmark Simulation Model no 2 (BSM2) extended with phosphorus transformations was adapted to the CF design / operational conditions. Flow diagram and model parameters were adjusted to reproduce the influent, effluent and process characteristics. Historical data between January 2014 and December 2019 was used to compare full-scale measurements and predictions. Next, different process intensification / mitigation technologies were evaluated using multiple criteria. Simulation values for COD, TSS, VSS/TSS ratio, TN, TP, NH₄⁺/NH₃, H_xPO4^3-x, NO_x alkalinity and pH fall within the interquartile ranges of measured data. The effects of the 2017 severe drought on influent variations and biological phosphorus removal are successfully reproduced for the entire period with dynamic simulations. Indeed, 80% of all dynamically simulated values are included within the plant measurement uncertainty ranges. Sludge management analysis reveals that flow diagrams with thermal hydrolysis pre-treatment (THP) result in a better energy balance in spite of having higher heat demands. The flow diagram with THP is able to i) increase biodegradability/solubility, ii) handle higher sludge loads, iii) change methanogenic microbial population and iv) generate lower solids volumes to dispose by improving sludge dewaterability. The study also reveals the importance of including struvite precipitation and harvesting (SPH) technology, and the effect that pH in the AD and the use of chemicals (NaOH, MgO) may have on phosphorus recovery. Model-based results indicate that the current aerobic volume in the water line (if properly aerated) would be able to handle the returns from the sludge line and the contribution of a granular partial nitritation/Anammox (PN/ANX) reactor on the overall nitrogen removal would be marginal. However autotrophic N denitrification generates a much lower sludge production and therefore increases AD treatment capacity. The study shows for the very first time in Africa how the use of a (calibrated) plant-wide model could assist water utilities to decide between competing plant layouts when upgrading a WWTW.

Differentiating Solutes with Precise Nanofiltration for Next Generation Environmental Separations: A Review

Selective removal or enrichment of targeted solutes including micropollutants, valuable elements, and mineral scalants from complex aqueous matrices is both challenging and pivotal to the success of water purification and resource recovery from unconventional water resources. Membrane separation with precision at the subnanometer or even subangstrom scale is of paramount importance to address those challenges via enabling "fit-for-purpose" water and wastewater treatment. So far, researchers have attempted to develop novel membrane materials with precise and tailored selectivity by tuning membrane structure and chemistry. In this critical review, we first present the environmental challenges and opportunities that necessitate improved solute-solute selectivity in membrane separation. We then discuss the mechanisms and desired membrane properties required for better membrane selectivity. On the basis of the most recent progress reported in the literature, we examine the key principles of material design and fabrication, which create membranes with enhanced and more targeted selectivity. We highlight the important roles of surface engineering, nanotechnology, and molecular-level design in improving membrane selectivity. Finally, we discuss the challenges and prospects of highly selective NF membranes for practical environmental applications, identifying knowledge gaps that will guide future research to promote environmental sustainability through more precise and tunable membrane separation.

Protein recovery as a resource from waste specifically via membrane technology-from waste to wonder

Economic growth and the rapid increase in the world population has led to a greater need for natural resources, which in turn, has put pressure on said resources along with the environment. Water, food, and energy, among other resources, pose a huge challenge. Numerous essential resources, including organic substances and valuable nutrients, can be found in wastewater, and these could be recovered with efficient technologies. Protein recovery from waste streams can provide an alternative resource that could be utilized as animal feed. Membrane separation, adsorption, and microbe-assisted protein recovery have been proposed as technologies that could be used for the aforementioned protein recovery. This present study focuses on the applicability of different technologies for protein recovery from different wastewaters. Membrane technology has been proven to be efficient for the effective concentration of proteins from waste sources. The main emphasis of the present short communication is to explore the possible strategies that could be utilized to recover or restore proteins from different wastewater sources. The presented study emphasizes the applicability of the recovery of proteins from various waste sources using membranes and the combination of the membrane process. Future research should focus on novel technologies that can help in the efficient extraction of these high-value compounds from wastes. Lastly, this short communication will evaluate the possibility of integrating membrane technology. This study will discuss the important proteins present in different industrial waste streams, such as those of potatoes, poultry, dairy, seafood and alfalfa, and the possible state of the art technologies for the recovery of these valuable proteins from the wastewater.

Optimal influent N-to-P ratio for stable microalgal cultivation in water treatment and nutrient recovery

Species specific nitrogen-to-phosphorus molar ratio (NPR) has been suggested for green microalgae. Algae can store nitrogen and phosphorus, suggesting that the optimum feed concentration dynamically changes as function of the nutrient storage. We assessed the effect of varying influent NPR on microalgal cultivation in terms of microbial community stability, effluent quality and biokinetics. Mixed green microalgae (Chlorella sorokiniana and Scenedesmus sp.) and a monoculture of Chlorella sp. were cultivated in continuous laboratory-scale reactors treating used water. An innovative image analysis tool, developed in this study, was used to track microbial community changes. Diatoms proliferated as influent NPR decreased, and were outcompeted once cultivation conditions were restored to the optimal NPR range. Low NPR operation resulted in decrease in phosphorus removal, biomass concentration and effluent nitrogen concentration. ASM-A kinetic model simulation results agreed well with operational data in the absence of diatoms. The failure to predict operational data in the presence of diatoms suggest differences in microbial activity that can significantly influence nutrient recovery in photobioreactors (PBR). No contamination occurred during Chlorella sp. monoculture cultivation with varying NPRs. Low NPR operation resulted in decrease in biomass concentration, effluent nitrogen concentration and nitrogen quota. The ASM-A model was calibrated for the monoculture and the simulations could predict the experimental data in continuous operation using a single parameter subset, suggesting stable biokinetics under the different NPR conditions. Results show that controlling the influent NPR is effective to maintain the algal community composition in PBR, thereby ensuring effective nutrients uptake.