Photodegradation of ibuprofen by TiO2 co-doping with urea and functionalized CNT irradiated with visible light - Effect of doping content and pH

Ferromanganese oxide-functionalized TiO2 for rapid catalytic ozonation of PPCPs through a coordinated oxidation process with adjusted composition and strengthened generation of reactive oxygen species

Ferromanganese oxide (MFOx) was first utilized to functionalize TiO2 and an MFOx@TiO2 catalyst was developed for catalytic ozonation for rapid attack of pharmaceutical and personal care products (PPCPs) with adjusted reactive oxygen species (ROSs) composition and strengthened ROSs generation. Unlike Al2O3, which strongly relied on adsorption and was significantly influenced by MFOx loading, synergistic catalytical effects of MFOx and TiO2 were observed, and optimal MFOx doping of 2 wt% and MFOx@TiO2 dosage of 500 ppm were obtained for catalyzing ozonation. In ibuprofen (IBP) degradation, MFOx@TiO2-catalyzed ozonation (MFOx@TiO2/O3) obtained 2.0-, 4.7- and 6.9-folds the kobs of TiO2/O3, MFOx/O3 and bare ozonation (B/O3). Stronger O3 decomposition was observed by MFOx@TiO2 over bare TiO2 with the participation of redox pairs Fe(II)/Fe(III) and Mn(II)/Mn(III)/Mn(IV) and increased surface oxygen vacancies (SOVs) from 9.8 % to 33.7 % was detected. The results revealed that Fe(II), Mn(II) and Mn(III) with low valance accelerated Ti(III) generation from Ti(VI), obtaining an unprecedented high Ti(III) composition occupying 35.3 % of the total Ti atoms. Ti(III) catalyzed the direct reduction of SOVs-O2 to •O2-, and it accelerated the formation of Ti(VI)-OH and Ti(VI)-O which catalyzed O3 decomposition into •O2-. •O2- was found to primarily initiate IBP degradation with nucleophilic addition and dominated over 66 % IBP removal. The enhanced •O2- generation further strengthened •OH and 1O2 production. MFOx@TiO2/O3 obtained 17 %, 21 % and 30 % higher TOC removal over TiO2/O3, MFOx/O3 and B/O3, respectively. Acute toxicity tests confirmed the effective toxicity control of organics by MFOx@TiO2/O3 process (inhibition rate: 10.9 %). Degradation test of atenolol and sulfamethoxazole confirmed the catalytic effects of MFOx@TiO2. MFOx@TiO2 performed strong resistance to water matrix in application test and showed good stability and reusability. The study proposed an effective catalyst for strengthening the ozonation process on PPCPs degradation and provided an in-depth understanding of the mechanisms and characteristics of the MFOx@TiO2 catalyst and MFOx@TiO2/O3 process.

Occurrence and fate of pharmaceutical pollutants in wastewater: Insights on ecotoxicity, health risk, and state-of-the-art removal

Pharmaceutical active compound (PhAC) residues are considered an emerging micropollutant that enters the aquatic environment and causes harmful ecotoxicity. The significant sources of PhACs in the environment include the pharmaceutical industry, hospital streams, and agricultural wastes (animal husbandry). Recent investigations demonstrated that wastewater treatment plants (WWTPs) are an important source of PhACs discharging ecosystems. Several commonly reported that PhACs are detected in a range level from ng L-1 to μg L-1 concentration in WWTP effluents. These compounds can have acute and chronic adverse impacts on natural wildlife, including flora and fauna. The approaches for PhAC removals in WWTPs include bioremediation, adsorption (e.g., biochar, chitosan, and graphene), and advanced oxidation processes (AOPs). Overall, adsorption and AOPs can effectively remove PhACs from wastewater aided by oxidizing radicals. Heterogeneous photocatalysis has also proved to be a sustainable solution. Bioremediation approaches such as membrane bioreactors (MBRs), constructed wetlands (CWs), and microalgal-based systems were applied to minimize pharmaceutical pollution. Noteworthy, applying MBRs has illustrated high removal efficiencies of up to 99%, promising prospective future. However, WWTPs should be combined with advanced solutions, e.g., AOPs/photodegradation, microalgae-bacteria consortia, etc., to treat and minimize their accumulation. More effective and novel technologies (e.g., new generation bioremediation) for PhAC degradation must be investigated and specially designed for a low-cost and full-scale. Investigating green and eco-friendly PhACs with advantages, e.g., low persistence, no bioaccumulation, less or non-toxicity, and environmentally friendly, is also necessary.

Modeling adsorption and photocatalytic treatment of recalcitrant contaminant on multi-walled carbon/TiO2 nanocomposite

A nanocomposite photocatalyst consisting of titanium dioxide (TiO2) supported on multiwalled carbon nanotubes (MWCNTs) has been successfully prepared and used for the treatment of wastewater contaminated with tetracycline (TC), a recalcitrant antibiotic pollutant. The TiO2/MCNT composites were prepared by a simple evaporation-drying method. The properties of MWCNT/TiO2 were optimized by dispersing different amounts of TiO2 onto MWCNT. The structural and optical characteristics of the nano-engineered photocatalyst composite were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR) techniques. Photocatalytic degradation of TC was conducted in a quartz glass reactor. Different kinetic models were used to demonstrate the governing mechanisms. The findings revealed that the TiO2/MWCNT composite had enhanced photocatalytic activity (95% TC removal) compared to TiO2 (86% removal). The photocatalyst nanocomposite exhibited overall pseudo-second-order reaction kinetics and favored the Langmuir adsorption isotherm. Although up to 95% degradation of TC was achieved, only 75% of it was mineralized as a result of the formation of stable refractory intermediates.

Heterogeneous Advanced Oxidation Processes: Current Approaches for Wastewater Treatment

Nowadays, water pollution is one of the most dangerous environmental problems in the world. The presence of the so-called emerging pollutants in the different water bodies, impossible to eliminate through conventional biological and physical treatments used in wastewater treatment plants due to their persistent and recalcitrant nature, means that pollution continues growing throughout the world. The presence of these emerging pollutants involves serious risks to human and animal health for aquatic and terrestrial organisms. Therefore, in recent years, advanced oxidation processes (AOPs) have been postulated as a viable, innovative and efficient technology for the elimination of these types of compounds from water bodies. The oxidation/reduction reactions triggered in most of these processes require a suitable catalyst. The most recent research focuses on the use and development of different types of heterogeneous catalysts, which are capable of overcoming some of the operational limitations of homogeneous processes such as the generation of metallic sludge, difficult separation of treated water and narrow working pH. This review details the current advances in the field of heterogeneous AOPs, Fenton processes and photocatalysts for the removal of different types of emerging pollutants.

Titanium Dioxide-Based Photocatalysts for Degradation of Emerging Contaminants including Pharmaceutical Pollutants

Contamination of the environment has been a growing problem in recent years. Due to the rapid growth in human population, the expansion of cities, along with the development of industry, more and more dangerous chemicals end up in the environment, especially in soil and water. For the most part, it is not possible to effectively remove chemicals through traditional remediation techniques, because those used in treatment plants are not specifically designed for this purpose. Therefore, new approaches for water remediation are in great demand. Many efforts have been focused on applications of photocatalysis for the remediation of chemical pollutants including drugs. Titanium(IV) oxide nanoparticles have particularly been considered as potential photocatalysts due to their favorable properties. In this article, we present the problem of emerging contaminants including drugs and discuss the use of photocatalysts based on titanium(IV) oxide nanoparticles for their degradation. A wide selection of materials, starting from bare TiO2, via its hybrid and composite materials, are discussed including those based on carbonaceous materials or connections with macrocyclic structures. Examples of photodegradation experiments on TiO2-based materials including those performed with various active pharmaceutical ingredients are also included.

Removal of emerging pollutant dibutylhydroxytoluene from water with CNT/TiO2 catalysts in a visible LED photoreactor

For the photocatalytic degradation of antioxidant 2,6-di-tert-butyl-hydroxytoluene (BHT), several TiO₂-based composites have been prepared in MWCNT from titanium isopropoxide and ethanol via supercritical CO₂ synthesis followed by calcination at 400 °C. TEM and XRD showed uniform coverage of CNT by 10 nm TiO₂ particles in the anatase form, and spectral analyses revealed the formation of CNT/TiO₂ structure. Further, synthesized material displayed significant visible light absorption and absorption edge shifted to longer wavelengths. Once the material was characterized, the effect of adsorption and photochemical degradation of BHT was investigated in the wavelength range from 400 to 700 nm, in batch mode, by monitoring the concentrations of BHT as a function of time. CNT/TiO₂ composites were more efficient than commercial TiO₂ P25 in the photodegradation of the antioxidant. In particular, CNT⁵⁰/TiO₂⁵⁰, a composite with 50% by weight of CNT, was the best catalyst, stable, and completely degrading BHT within 30 min of exposure to visible light. The role played by different reactive oxidative species (h⁺, OH ^·, ¹O₂, and [Formula: see text]) in the photocatalytic reaction was also studied by using appropriate radical scavengers that inhibited the corresponding active species. Superoxide radical was found the main oxidizing agent.

Pharmaceuticals and personal care products in water and wastewater: a review of treatment processes and use of photocatalyst immobilized on functionalized carbon in AOP degradation

The presence of emerging contaminants such as pharmaceutical and personal care products in many aqueous matrices have been reported. One of such matrix is streams of wastewater, including wastewater treatment plants inflows and outflows and wastewater flow by-passing wastewater treatment plants. Their persistence arises from their resistant to breakdown, hence they may remain in the environment over long time, with a potential to cause adverse effects including endocrine disruption, gene toxicity, the imposition of sex organs, antibiotic resistance and many others in some aquatic organisms exposed to arrays of residues of pharmaceutical and personal care products. Among the treatment techniques, advanced oxidation processes have been reported to be a better technique through which these PPCPs can be degraded in the WWTPs. Heterogeneous photocatalysis using various photocatalyst immobilized on solid support such as activated carbon, graphene and carbon nanotubes in AOPs have been shown to be a viable and efficient method of PPCPs degradation. This is because, the performance of most WWTPs is limited since they were not designed to degrade toxic and recalcitrant PPCPs. This review highlight the occurrence, concentration of PPCPs in wastewater and the removal efficiency of heterogeneous photocatalysis of TiO2 immobilized on solid supports.

One-pot microwave-hydrothermally synthesized carbon nanotube-cerium oxide nanocomposites for enhanced visible photodegradation of acid orange 7

Carbon nanotubes (CNT)-cerium oxide (CeO2) nanocomposites were fabricated successfully by one-pot microwave hydrothermal growth of regular CeO2 nanoparticles with a size of 8 nm on hydroxyl-functionalized multi-walled CNTs. These nanocomposite photocatalysts demonstrated an acid orange (AO7) photocatalytic degradation efficiency of above 90% under solar-simulated light irradiation for 3 h, which was much higher than that of the pure CeO2 nanoparticles. The enhanced photocatalytic activity was observed to mainly originate from the ˙O2- and hole traps, while the hydroxyl radical ˙OH played a secondary role.

Enhanced Ibuprofen Adsorption and Desorption on Synthesized Functionalized Magnetic Multiwall Carbon Nanotubes from Aqueous Solution

In recent years, concerns have been raised about the occurrence of active raw materials and pharmaceutical ingredients that may be present in water, including wastewater, in the pharmaceutical industry. Wastewater treatment methods are not enough to completely remove active pharmaceuticals and other waste; thus, this study aims to assess the use of a multiwall carbon nanotube after derivatization and magnetization as a new and renewable absorbent for removing ibuprofen from an aqueous medium. The adsorbents were prepared by first oxidizing a multiwall carbon nanotube and then deriving the oxidized product with hydroxyl amine (m-MWCNT-HA), hydrazine (m-MWCNT-HYD), and amino acid (m-MWCNT-CYS). Adsorbents were characterized by Raman spectroscopy, Fourier Transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM and TEM), Brunauer-Emmett-Teller surface area analysis (BET), thermogravimetric analysis (TGA), and vibrating sample magnetometer (VSM). Batch adsorption studies were conducted to study the effects of pH, temperature, time, and initial concentration of the adsorbate. Adsorption isotherm, kinetics, and thermodynamics studies were also conducted. The results show that the optimal pH for nearly complete removal of Ibu in a short time at room temperature was 4 for three adsorbents. The adsorption followed the Langmuir isotherm model with pseudo-second-order kinetics. The percentage of removal of ibuprofen reached up to 98.4%, 93%, and 61.5% for m-MWCNT-CYS, m-MWCNT-HYD, and m-MWCNT-HA respectively. To the best of our knowledge, the grafted MWCNTs presented in this work comprise the first example in the literature of oxidized MWCNT modified with such functionalities and applied for ibuprofen removal.

Photocatalytic degradation of organic micropollutants: Inhibition mechanisms by different fractions of natural organic matter

Natural organic matter (NOM) can inhibit the photocatalytic degradation of organic micropollutants (OMPs) through inner filter effect, reactive oxygen species (ROS) scavenging, and competitive adsorption. However, previous studies have focused solely on the bulk properties of NOM and our understanding of the inhibition mechanism by NOM fractions during photocatalytic degradation of OMP is still fragmentary. In this study, five well-characterized different NOM samples (i.e., secondary treated wastewater, river water, and three standard NOM surrogates) were used to elucidate the inhibition mechanisms during photocatalytic degradation of carbamazepine (a model OMP) using TiO₂ and its composites with carbon nanotubes (CNT-TiO₂) under UVC and solar-light irradiation. The results indicated that terrestrially derived NOM with high aromaticity, a low oxygen/carbon atom ratio, and large molecular weight is the major fraction that participates in ROS scavenging, competitive adsorption, and inner filter effect. Furthermore, the modeling analysis suggested that inner filter effect due to NOM and ROS scavenging was the most influential inhibitory mechanism. In the case of secondary treated wastewater, the presence of high concentrations of inorganic species (e.g., PO₄^3-, Cl^-, and NO₃^-) together with NOM significantly reduced the photocatalytic degradation of carbamazepine. Overall, the methods and the results of this study provide a comprehensive understanding of the effects of NOM fractions on photocatalysis and highlight the need to further consider the interplay between NOM and background inorganic constituents in photocatalytic degradation of OMP.

Current Trends in the Application of Nanomaterials for the Removal of Emerging Micropollutants and Pathogens from Water

Water resources contamination has a worldwide impact and is a cause of global concern. The need for provision of clean water is becoming more and more demanding. Nanotechnology may support effective strategies for the treatment, use and reuse of water and the development of next-generation water supply systems. The excellent properties and effectiveness of nanomaterials make them particularly suitable for water/wastewater treatment. This review provides a comprehensive overview of the main categories of nanomaterials used in catalytic processes (carbon nanotubes/graphitic carbon nitride (CNT/g-C₃N₄) composites/graphene-based composites, metal oxides and composites, metal–organic framework and commercially available nanomaterials). These materials have found application in the removal of different categories of pollutants, including pharmaceutically active compounds, personal care products, organic micropollutants, as well as for the disinfection of bacterial, viral and protozoa microbial targets, in water and wastewater matrices. Apart from reviewing the characteristics and efficacy of the aforementioned nanoengineered materials for the removal of different pollutants, we have also recorded performance limitations issues (e.g., toxicity, operating conditions and reuse) for their practical application in water and wastewater treatment on large scale. Research efforts and continuous production are expected to support the development of eco-friendly, economic and efficient nanomaterials for real life applications in the near future.

Photocatalytic degradation of ibuprofen using modified titanium oxide supported on CMK-3: effect of Ti content on the TiO2 and carbon interaction

TiO₂ nanoparticles dispersed in ordered mesoporous CMK-3 carbon with different Ti contents were successfully synthesized and their activity in the photocatalytic degradation of ibuprofen was presented.

Enhancing photocatalytic degradation of methyl orange by crystallinity transformation of titanium dioxide: A kinetic study

This work aimed to enhance the photocatalytic degradation of methyl orange (MO) by crystallinity transformation of titanium dioxide (TiO₂ ). In addition, the kinetic degradation of MO was determined. To transform its crystallinity, TiO₂ was synthesized using a sol-gel method and calcined at between 200°C to 600°C. Calcination at a temperature of 250°C resulted in TiO₂ that showed the best performance, corresponding to MO removal of 87% ± 7%. MO removal by TiO₂ calcined between 250°C to 400°C was higher than for commercial TiO₂ powder (Sigma-aldrich) (62% ± 4%). TiO₂ with a small crystallite size and high anatase fraction enhanced the photocatalytic degradation of MO, while the specific surface area and surface roughness seemed to play a minor role. The photocatalytic degradation of MO was NaCl-independent, while the photocatalytic activity increased with decreased pH. Reused TiO₂ showed similar photocatalytic degradation of MO compared with pristine TiO₂ , at 84 ± 2%. The oxidation kinetics of TiO₂  calcined at 250°C were fitted to the Langmuir-Hinshelwood model (R²  = 0.9134). The k_r and K_s values were 0.027 mg L^-1  min^-1  and 0.621 L/mg, respectively. Crystallinity transformation was a major factor in the enhancement of photocatalytic degradation of MO. PRACTITIONER POINTS: Photocatalytic activity of TiO₂ depends on calcination temperature, pH, and a number of UVC lamps. TiO₂ with a small crystallite size and high anatase fraction enhanced the photocatalytic degradation of MO.

Micro-TiO2 coated glass surfaces safely abate drugs in surface water

The ingredients of Pharmaceuticals and Personal Care Products (PPCPs) persist in water and conventional treatment plants are not able to remove them efficiently. Sonochemical treatment is insufficient to mineralize organics such as ibuprofen into CO₂ and H₂O. TiO₂ degrades ibuprofen (IBP) under UV light; however, it does not reach a high grade of conversion. Here, we investigated the mineralization of ibuprofen to CO₂ by TiO₂ UV-C photocatalysis. We replaced nano-sized P25 (the standard catalyst) with a micro-sized commercial sample of TiO₂ to preclude the use of nanoparticles which are dangerous for human health and because typical filtration systems are expensive and inefficient. We deposited micro-TiO₂ on glass Raschig rings to ensure an easy recovery and reuse of the photocatalyst and we studied its performance both with a batch and a continuous reactor. Micro-TiO₂ mineralized 100% of IBP in 24 h. TiO₂-coated glass Raschig rings degraded 87% of IBP in 6 h of UV-C irradiation in a continuous reactor, with a mineralization of 25%. Electronspray ionization mass spectrometer (ESI-MS, positive mode) analyses identified 13 different byproducts and we hypothised a degradration pathway for IBP degradation.

Photocatalytic degradation of ibuprofen in water using TiO2/UV and g-C3N4/visible light: Study of intermediate degradation products by liquid chromatography coupled to high-resolution mass spectrometry

The photocatalytic degradation of ibuprofen with TiO₂ nanoparticles (NPs) and UV light and with graphitic carbon nitride (g-C₃N₄) 2D nanosheets and visible light are proposed and compared as advanced oxidation treatments for the removal of ibuprofen in water. By-products formed with both photocatalytic systems have been tentatively identified based on the results of ultra-high-performance liquid chromatography coupled to high-resolution mass spectrometry, using a quadrupole-time of flight mass spectrometer in positive and negative ionization modes, which allowed to obtain the elementary composition of their precursors and fragment ions. The removal of ibuprofen and the by-product formation were studied at three pH values. Ibuprofen depletion followed pseudo fist-order kinetics with rate constants of 0.04, 1.0 and 0.0006 min^-1 at pH 2.50, 5.05 and 12.04 for TiO₂/UV and 0.03, 0.007 and 0.0005 min^-1 at pH 2.51, 5.05 and 11.33 for g-C₃N₄/vis, respectively. Around eighteen by-products have been detected with slight differences between the two photocatalytic systems studied. The evolution of the main common by-products (tentatively identified as 1-(4-ethylphenyl)-2-methylpropan-1-one, 1-(4-isobutylphenyl)ethan-1-ol, 1-(4-ethylphenyl)-2-methylpropan-1-ol and 1(-4-acetylphenyl)-2-methylpropan-1-one) were monitored and the results were consistent with reaction pathways based on hydroxyl radical attacks following/followed by decarboxylation. Moreover, some by-products have been reported for the first time in the photocatalytic oxidation of ibuprofen.

Photodegradation of pharmaceuticals and personal care products in water treatment using carbonaceous-TiO2 composites: A critical review of recent literature

The high concentrations of pharmaceuticals and personal care products (PPCP) that found in water in many locations are of concern. Among the available water treatment methods, heterogeneous photocatalysis using TiO₂ is an emerging and viable technology to overcome the occurrence of PPCP in natural and waste water. The combination of carbonaceous materials (e.g., activated carbon, carbon nanotubes and graphene nanosheets) with TiO₂, a recent development, gives significantly improved performance. In this article, we present a critical review of the development and fabrication of carbonaceous-TiO₂ and its application to PPCP removal including its influence on water chemistry, and the relevant operational parameters. Finally, we present an analysis of current priorities in the ongoing research and development of carbonaceous-TiO₂ for the photodegradation of PPCP.

Enhanced photocatalytic degradation of tetracycline and real pharmaceutical wastewater using MWCNT/TiO2 nano-composite

Photocatalytic degradation of tetracycline using MWCNT/TiO₂nanocomposite was investigated under UVC irradiation. The effective operational parameters included pH, irradiation time, photocatalyst dosage, weight ratio of MWCNT to TiO₂ and tetracycline concentration and were studied consecutively. Complete removal of tetracycline concentrations of up to 10 mg/L was obtained at MWCNT to TiO₂ ratio of 1.5 (w/w%), pH 5, photocatalyst dosage of 0.2 g/L. Pseudo-first order kinetic model was best fitted with the experimental results (R²: 0.91-0.98 for different tetracycline concentrations). Based on TOC analysis, mineralization was 37% in the same reaction conditions for initial tetracycline concentration of 10 mg/L and reached to 83% after 300 min. In the case of real pharmaceutical wastewater, the COD concentration of 2267 mg/L decreased to 342 mg/L after 240 min in the same operational conditions.

Nanocomposite of exfoliated bentonite/g-C3N4/Ag3PO4 for enhanced visible-light photocatalytic decomposition of Rhodamine B

Novel visible-light-driven heterojunction photocatalyst comprising exfoliated bentonite, g-C3N4 and Ag3PO4 (EB/g-C3N4/Ag3PO4) was synthesized by a facile and green method. The composites EB/g-C3N4/Ag3PO4 were characterized by X-ray diffraction, Transmission electron microscopy, Fourier transform infrared spectroscopy, UV-Vis diffuse reflectance spectroscopy and the Brunauer, Emmett, and Teller (BET) surface area method. Under visible light irradiation, EB/g-C3N4/Ag3PO4 composites displayed much higher photocatalytic activity than that of either pure g-C3N4 or pure Ag3PO4 in the degradation of Rhodamine B (RhB). Among the hybrid photocatalysts, EB/g-C3N4/Ag3PO4 composite containing 20 wt% Ag3PO4 exhibited the highest photocatalytic activity for the decolorization of RhB. Under the visible-light irradiation, the RhB dye was completely decolorized in less than 60 min. The enhanced photocatalytic performance is attributed to the stable structure, enlarged surface area, strong adsorbability, strong light absorption ability, and high-efficiency separation rate of photoinduced electron-hole pairs. Our finding paves a way to design highly efficient and stable visible-light-induced photocatalysts for practical applications in wastewater treatment.