Polypyrrole-grafted peanut shell biological carbon as a potential sorbent for fluoride removal: Sorption capability and mechanism

Advances and future perspectives of water defluoridation by adsorption technology: A review

Fluoride contamination in water sources poses a significant challenge to human health and the environment. In recent years, adsorption technology has emerged as a promising approach for water defluoridation due to its efficiency and cost-effectiveness. This review article comprehensively explores the advances in water defluoridation through adsorption processes. Various adsorbents, including natural and synthetic materials, have been investigated for their efficacy in removing fluoride ions from water. The mechanisms underlying adsorption interactions are elucidated, shedding light on the factors influencing defluoridation efficiency. Moreover, the review outlines the current state of technology, highlighting successful case studies and field applications. Future perspectives in the field of water defluoridation by adsorption are discussed, emphasizing the need for sustainable and scalable solutions. The integration of novel materials, process optimization, and the development of hybrid technologies are proposed as pathways to address existing challenges and enhance the overall efficacy of water defluoridation. This comprehensive assessment of the advances and future directions in adsorption-based water defluoridation provides valuable insights for researchers, policymakers, and practitioners working towards ensuring safe and accessible drinking water for all.

Remediation of arsenic and fluoride from groundwater: a critical review on bioadsorption, mechanism, future application, and challenges for water purification

In the past few decades, the excessive and inadequate use of technological advances has led to groundwater contamination, mainly caused by organic and inorganic pollutants, which are highly harmful to human health, agriculture, water bodies, and aquaculture. Among all toxic pollutants, As and F- play a significant role in groundwater contamination due to their excellent reactivity with other elements. To mitigate the prevalence of arsenic and fluoride within the water system, the use of biochar gives an attractive strategy for removing them mainly because of the substantial surface area, pore size, pH, aromatic structure, and functional groups inherent in biochar, which are primarily dependent upon its raw material and pyrolysis temperature. Researcher develops different methods like physiochemical and electrochemical for treating arsenic and fluoride contamination. Among all removal methods, bioadsorption using agricultural waste residues shows effective/feasible removal of As and F- due to its low cost, ecofriendly nature, readily available, and efficient reuse compared with several other harmful synthetic materials that demand costly design specifications. This study discusses current developments in bioadsorption methods for As and F- that use agricultural-based biomaterials and describes the prevailing state of arsenic and fluoride removal strategies that use biomaterials precisely.

Removal of fluoride using platanus acerifoli leaves biochar - an efficient and low-cost application in wastewater treatment

The fluoride with high-concentration in industrial wastewater will cause great harm to the environment and calcium-modified biochar is an effective adsorbent for the removal of fluoride. Biochar composites were prepared from mature and dried dead leaves and eggshell to remove fluoride from the aqueous solution. The effects of raw material ratio, pH, contact time, adsorbent dosage, temperature, initial concentration of fluoride, and the coexisting ions on the removal efficiency of fluoride were explored. The biochar composites before and after fluoride removal were characterized by the SEM, FTIR, XRD, and XPS, which showed CaF₂ precipitation was formed during the adsorption. The kinetics and isotherm study showed that chemical adsorption was the primary step for the fluoride adsorption of the biochar composites. The removal efficiency of fluoride can reach 98.53% when the amount of adsorbent was 1.6 g/L and the fluoride concentration was 500 mg/L. The BET-specific surface area of platanus acerifoli leaves biochar was 410.14 m²/g, which was suitable for the adsorption carrier. The adsorption capacity of the biochar composite materials was as high as 308 mg/g. The platanus acerifoli leaves-eggshell biochar composite with large pore size and high removal efficiency may be used as an efficient and low-cost adsorbent for treating high-concentration fluoride-containing wastewater.

The characterization of a novel magnetic biochar derived from sulfate-reducing sludge and its application for aqueous Cr(Ⅵ) removal through synergistic effects of adsorption and chemical reduction

Removal of heavy metals from the aqueous environment via physiochemical adsorption always remains a great challenge owing to the slow kinetics and low removal capacity for the conventional adsorbent. In this study, the sulfate-reducing bacteria (SRB)-rich anaerobic sludge was pyrolyzed for the preparation of magnetic biochar, i.e. SBC-20-500 (SBC: sulfate-reducing sludge-based biochar; 20 denotes the biochar dosage, namely 8 g dried sludge in 400 mL iron solution which is equal to 20 g/L; 500 represents the pyrolysis temperature, i.e. at 500 °C) with tunable pore structure and surface properties towards efficient removal of chromium (Cr (Ⅵ)). The characterization revealed that magnetic biochar SBC-20-500 exhibited higher surface area and larger pore volume compared to non-magnetic SBC-500. Batch experiments on Cr (Ⅵ) removal were performed under different biochar dosages, pH values, initial Cr (Ⅵ) concentrations and temperatures. The results illustrated that magnetic biochar demonstrated much larger Cr (Ⅵ) adsorption capacity with q_e of 5.3585 mg/g as compared to non-modified one (q_e = 0.7206 mg/g). The maximum Cr (Ⅵ) removal efficiency of SBC-20-500 reached approximately 93.7% within 24 h under the conditions of pH = 3.0, biochar dosage = 0.8 g and initial Cr (Ⅵ) concentration = 50 mg/L. The kinetic and isotherm fitting results suggested that the pseudo-second-order kinetic and Langmuir isotherm model were more suitable for describing the adsorption behavior of Cr (Ⅵ) by SBC-20-500. The XPS and FTIR results confirmed that chemical reduction of Cr (Ⅵ) to Cr (Ⅲ) also played a role in Cr (Ⅵ) removal in the presence of SBC-20-500. Moreover, the Cr (Ⅵ) removal capacity could still achieve 3.50 mg/g even after five adsorption-desorption cycles, indicating the satisfactory reusability of the as-prepared biochar. The results of this study may provide a win-win approach for simultaneous resource recovery from the wasted sulfate-reducing sludge (SRS) and highly-efficient remediation of Cr (Ⅵ)-contaminated environment.

A critical review on adsorption and recovery of fluoride from wastewater by metal-based adsorbents

Rapid industrialization is deteriorating water quality, and fluoride pollution in water is one of the most serious environmental pollution problems. Adsorption technology is an efficient and selective process for removing fluoride from aqueous solutions using adsorbents. Metal-based adsorbents synergize the advantages of fast adsorption, high adsorption capacity, and excellent selectivity to effectively remove fluoride from water bodies, promising to satisfy environmental sustainability requirements. This paper reviews the metal-based adsorbents: iron-based, aluminum-based, lanthanum-based, cerium-based, titanium-based, zirconium-based, and multi-metal composite adsorbents, primarily focusing on the adsorption conditions and fluoride removal capacities and discusses prospects and challenges in the synthesis and application of metal-based adsorbents. This paper aims to stimulate new thinking and innovation in developing the next generation of sustainable adsorbents.

Nanoarchitectonics and Kinetics Insights into Fluoride Removal from Drinking Water Using Magnetic Tea Biochar

Fluoride contamination in water is a key problem facing the world, leading to health problems such as dental and skeletal fluorosis. So, we used low-cost multifunctional tea biochar (TBC) and magnetic tea biochar (MTBC) prepared by facile one-step pyrolysis of waste tea leaves. The TBC and MTBC were characterized by XRD, SEM, FTIR, and VSM. Both TBC and MTBC contain high carbon contents of 63.45 and 63.75%, respectively. The surface area of MTBC (115.65 m²/g) was higher than TBC (81.64 m²/g). The modified biochar MTBC was further used to remediate the fluoride-contaminated water. The fluoride adsorption testing was conducted using the batch method at 298, 308, and 318 K. The maximum fluoride removal efficiency (E%) using MTBC was 98% when the adsorbent dosage was 0.5 g/L and the fluoride concentration was 50 mg/L. The experiment data for fluoride adsorption on MTBC best fit the pseudo 2nd order, rather than the pseudo 1st order. In addition, the intraparticle diffusion model predicts the boundary diffusion. Langmuir, Freundlich, Temkin, and Dubnin-Radushkevich isotherm models were fitted to explain the fluoride adsorption on MTBC. The Langmuir adsorption capacity of MTBC = 18.78 mg/g was recorded at 298 K and decreased as the temperature increased. The MTBC biochar was reused in ten cycles, and the E% was still 85%. The obtained biochar with a large pore size and high removal efficiency may be an effective and low-cost adsorbent for treating fluoride-containing water.

Cyclic enrichment of chromium based on valence state transformation in metal-free photocatalytic reductive imprinted composite hydrogel

Cr (VI) exists in anion form and can be reduced to positive charged Cr (III) under certain conditions. Can positive charged Cr (III) be continually used for absorbing Cr (VI) to achieve cyclic accumulation of chromium? In this paper, an ion imprinting material for adsorption of Cr (VI) was prepared by dispersing polypyrrole (PPy) in a gelatin/chitosan (Gel/CS) hydrogel network, named Gel/CS/PPy. Based on the conversion of Cr (VI) to Cr (III), a cyclic enrichment process including adsorption-photoreduction-fixation-readsorption of Cr (VI) was established in Gel/CS/PPy hydrogel. The composition and structure of the Gel/CS/PPy were analyzed by scanning electron microscopy (SEM), Fourier transform-infrared spectroscopy (FT-IR), thermogravimetric (TGA), texture analyzer (Universal TA), zeta potential and ultraviolet-visible-near infrared spectra (UV-vis-NIR). The conversion of Cr (VI) and Cr (III) and its promoting effect on readsorption were verified by XPS. The results showed that Gel/CS/PPy has good adsorption capacity for Cr (VI) and excellent photocatalytic ability to reduce Cr (VI) to Cr (III). Cr (III)-loaded Gel/CS/PPy can be further used to adsorb Cr (VI) and showed good adsorption efficiency even after four cycles. The optimal operating condition for Cr (VI) adsorption is pH = 3; 2 g/L dose of Gel/CS/PPy; and the adsorption capacity of Cr (VI) was about 106.8 mg/g after six adsorption cycles. Since Gel/CS/PPy is composed of organic components, high purity chromium can be recovered by simple calcination method later. Therefore, the synthesized Gel/CS/PPy has great potential in the practical application of low concentration Cr (VI) treatment in water.

Application of artificial neural networks to predict Young's moduli of cartilage scaffolds: An in-vitro and micromechanical study

In this study, four-phase Gelatin-Polypyrrole-Akermanite-Magnetite scaffolds were fabricated and analyzed using in-vitro tests and numerical simulations. Such scaffolds contained various amounts of Magnetite bioceramics as much as 0, 5, 10, and 15 wt% of Gelatin-Polypyrrole-Akermanite biocomposite. X-ray diffraction analysis and Fourier transform infrared spectroscopy were conducted. Swelling and degradation of the scaffolds were studied by immersing them in phosphate-buffered saline, PBS, solution. Magnetite bioceramics decreased the swelling percent and degradation duration. By immersing scaffolds in simulated body fluid, the highest formation rate of Apatite was observed in the 15 wt% Magnetite samples. The mean pore size was in an acceptable range to provide suitable conditions for cell proliferation. MG-63 cells were cultured on extracts of the scaffolds for 24, 48, and 72 h and their surfaces for 24 h. Cell viabilities and cell morphologies were assessed. Afterward, micromechanical models with spherical and polyhedral voids and artificial neural networks were employed to predict Young's moduli of the scaffolds. Based on the results of finite element analyses, spherical-shaped void models made the best predictions of elastic behavior in the 0, 5 wt% Magnetite scaffolds compared to the experimental data. Results of the simulations and experimental tests for the ten wt% Magnetite samples were well matched in both micromechanical models. In the 15 wt% Magnetite sample, models with polyhedral voids could precisely predict Young's modulus of such scaffolds.

Application of polypyrrole-based adsorbents in the removal of fluoride: a review

When fluoride levels in water exceed permitted limits (>1.5 mg L−1), water pollution becomes a major concern to humans.

Anionic Dye Removal by Polypyrrole-Modified Red Mud and Its Application to a Lab-Scale Column: Adsorption Performance and Phytotoxicity Assessment

In this study, polypyrrole-modified red mud (PRM) was prepared for the efficient removal of anionic dyes (methyl orange and Congo red) from aqueous solutions. The phytotoxicity (bean sprouts) of the dye solution before and after dye removal was investigated. Adsorption kinetics confirmed that the adsorption of methyl orange (MO) and Congo red (CR) on PRM was controlled by chemical reactions between the functional groups of polypyrrole and dyes. From Langmuir isotherm fitting, we found the theoretical adsorption capacities of MO and CR on PRM were 194.1 and 314.9 mg/g, respectively. The adsorption progress of MO and CR on PRM was found to be spontaneous and endothermic. The column studies demonstrated that, under dynamic flow, the PRM can efficiently remove MO and CR from aqueous solution, with adsorption capacities of 31.08 and 55.04 mg/g, respectively. In the toxicity test, the phytotoxicity of the column effluents (after dye removal) was significantly lowered compared to the initial dye influents. After the removal of MO and CR, the average root length of bean sprouts was increased from 3.30 cm to 5.18 cm and from 3.01 cm to 7.00 cm, respectively. These findings highlighted the efficient removal of dyes by PRM from aqueous solution, demonstrating the possible application of PRM for the removal of dye from dye-contaminated wastewaters.

Cerium based UiO-66 MOF as a multipollutant adsorbent for universal water purification

Herein, we demonstrate the use of cerium (Ce)-UiO-66 metal organic framework (MOF) for the removal of a variety of potentially toxic pollutants. The Ce-UiO-66 MOF, with similar framework topologies to Zr-UiO-66, has not been explored for its adsorptive properties in water remediation. The replacement of Zr metal center with Ce yields a MOF that can be synthesized in shorter durations with lesser energy consumptions and with excellent multipollutant adsorption properties. Further, the Ce-UiO-66 MOF was also studied for its adsorption abilities in the binary component system. Interestingly, the adsorbent showed higher adsorption capacities in the presence of other pollutants. Removal studies for other potentially toxic anionic and cationic dyes showed that the Ce-UiO-66 MOF has a wide range of contaminant removal abilities. Investigations of individual adsorption capacities revealed that the Ce-UiO-66 MOF has a maximum adsorption capacity of 793.7 mg/g for congo red (CR), 110 mg/g for methylene blue (MB), 66.1 mg/g for fluoride (F^-), 30 mg/g for Cr⁶⁺ and 485.4 mg/g for the pharmaceutical waste diclofenac sodium (DCF). To imply the practical applications of the Ce-UiO-66 MOF we have also demonstrated an adaptable filter that could separate all the potentially toxic pollutants.

Removal of fluoride from industrial wastewater by using different adsorbents: A review

Many industries such as iron and steel metallurgy, copper and zinc smelting, the battery industry, and cement manufacturing industries discharge high concentrations of fluoride-containing wastewater into the environment. Subsequently, the discharge of high fluoride effluent serves as a threat to human life as well as the ecological ability to sustain life. This article analyses the advantages and drawbacks of some fluoride remediation technologies such as precipitation and flocculation, membrane technology, ion exchange technology, and adsorption technology. Among them, adsorption technology is considered the obvious choice and the best applicable technology. As such, several adsorbents with high fluoride adsorption capacity such as modified alumina, metal oxides, biomass, carbon-based materials, metal-organic frameworks, and other adsorption materials including their characteristics have been comprehensively summarized. Additionally, different adsorption conditions of the various adsorbents, such as pH, temperature, initial fluoride concentration, and contact time have been discussed in detail. The study found out that the composite synergy between different materials, morphological and structural control, and the strengthening of their functional groups can effectively improve the ability of the adsorbents for removing fluoride. This study has prospected the direction of various adsorbents for removing fluoride in wastewater, which would serve as guiding significance for future research in the field.

Photo/thermal response of polypyrrole-modified calcium alginate/gelatin microspheres based on helix-coil structural transition and the controlled release of agrochemicals

Responsive controlled-release systems can not only improve the efficiency of agrochemical utilization but also increase crop yield and reduce environmental pollution caused by excessive use of agrochemicals. In this paper, the helix-coil structural transition of gelatin was adopted to construct a novel stimuli-responsive controlled-release system called polypyrrole/Ca-alginate/gelatin (PPy/Ca-alginate/Gel). In PPy/Ca-alginate/Gel, Ca-alginate and gelatin form a semi-interpenetrating network in which uncross-linked gelatin can undergo a free helix-coil structural transition due to the photothermal effect of PPy. The structural transition of gelatin will lead to changes in the functional groups and microstructure of semi-interpenetrating hydrogels and furthermore achieve the release of template agrochemical molecules embedded in hydrogels. By using carbendazim as a template molecule, the photothermal conversion and controlled release of PPy/Ca-alginate/Gel were systematically studied. After 600 s of light irradiation, its temperature could be increased by 17 ℃. The release of carbendazim in microspheres reached 91.8 % after 8 h of light irradiation, while it was only 13.3 % in the dark. The results indicated that PPy/Ca-alginate/Gel have excellent controlled-release and sustained-release properties and broad application potential in agriculture.

Activated biochar derived from peanut shells as the electrode materials with excellent performance in Zinc-air battery and supercapacitance

The use of activated biochar-based electrode derived from waste biomass in energy technologies, such as metal-air batteries and supercapacitors, is an important strategy for realizing energy and environmental sustainability in the future. Herein, peanut shells (waste biomass) were employed to prepare activated biochar materials by pyrolysis in molten KCl and heat-treatment. The effective dispersion and corrosion effects of molten salt for the pyrolysis products during pyrolysis obviously increase defects and specific surface area of the activated biochar materials. The prepared activated biochar material (PS-800-1000) by pyrolysis in molten KCl at 800 °C and heat-treatment at 1000 °C exhibits excellent catalytic activity with half-wave potential of 0.84 V vs. RHE, comparable to commercial Pt/C for oxygen reduction reaction (ORR) in 0.1 M KOH and outstanding supercapacitance performance in 6 M KOH with high specific capacitance (355 F g^-1 at 0.5 A g^-1), which exceeds all reported biochar derived from peanut shells. The PS-800-1000-based zinc-air battery (ZAB) displays higher peak power density (141 mW cm^-2), specific capacity (767 mAh g_Zn^-1) and cycling stability than Pt/C-based ZAB. The activated biochar prepared by pyrolysis in molten KCl and heat-treatment method from peanut shells can be a promising candidate for replacing precious metals in energy conversion/storage devices.

Effective removal of excessive fluoride from aqueous environment using activated pods of Bauhinia variegata: Batch and dynamic analysis

In this study, a novel biosorbent is prepared from the pods of Bauhinia variegata is used for defluoridation of the fluoride contaminated water. It is an eco-friendly and economically feasible material. Comparison of adsorption capacity of Physically Treated Bauhinia (PTB) and Chemically Treated Bauhinia (CTB) are carried in this work. Characterization studies like SEM, EDS, FTIR, and XRD are executed to analyze surface morphology and functional groups in PTB and CTB. The experimental procedure was implemented in a batch process where the operating constraints such as dosage, pH, initial fluoride concentration, time, and temperature are varied to attain optimized efficiency. PTB and CTB yield an adsorption capacities of 10.90 mg/g and 15.45 mg/g respectively in the batch process. PTB adheres fluoride in monolayer formation whereas CTB forms multilayer adsorption. The adsorption process was described by the Pseudo first-order model to state the mechanism of physisorption. The negative values of thermodynamic parameters indicate spontaneity and favorable conditions for adsorption process. As CTB has a higher adsorption capacity than PTB, the batch study has been extended to column adsorption. Bed depth, initial fluoride concentration, and flow rate are the experimental variables used to acquire breakthrough curves. Simplified column models like Adam-Bohart, Thomas, and Yoon-Nelson models were analyzed. In column studies, Yoon-Nelson model fitted well in describing the process of adsorption. The maximum adsorption capacity acquired during the column process was found to be 1.176 mg/g with a bed depth of 5 cm and a flow rate of 5 ml/min. Thus, the innocuous and sustainable adsorbent is developed and serves as an excellent defluoridation agent.

Fe3O4 and iminodiacetic acid modified peanut husk as a novel adsorbent for the uptake of Cu (II) and Pb (II) in aqueous solution: Characterization, equilibrium and kinetic study

The presence of higher concentrations of heavy metals in water affects its quality with a concomitant adverse effect on its users thus their removal is paramount. A novel adsorbent, PN-Fe₃O₄-IDA derived from the chemical modification of peanut husk (a low-cost agricultural biomass produced in significant quantities globally) using magnetic nanoparticles (Fe₃O₄) and iminodiacetic acid was utilized for the remediation of heavy metals in aqueous solution. Analytical techniques vis-à-vis the Fourier-Transform Infrared, Scanning Electron Microscope, Brunauer-Emmett-Teller, X-ray photoelectron spectroscopy and X-ray Diffraction were applied for the characterization of PN-Fe₃O₄-IDA. Results from the characterization studies showed that PN-Fe₃O₄-IDA possessed a mesoporous structure, a heterogeneous surface and functional groups such as carboxylic acid and a tertiary nitrogen atom which enhanced its adsorption capacities as well as magnetic properties which ensured its easy removal from the solution using a magnet. The maximum uptake of Pb and Cu onto PN-Fe₃O₄-IDA was 0.36 and 0.75 mmol g^-1 (at 318 K) respectively with the chemisorption process being the major reaction pathway for the processes. The synthesized adsorbent exhibits significant adsorption capacity for the selected pollutants as well as some unique features which promotes its use as an adsorbent for wastewater remediation processes.

A hydrophobic bio-adsorbent synthesized by nanoparticle-modified graphene oxide coated corn straw pith for dye adsorption and photocatalytic degradation

A novel bio-adsorbent was prepared from corn straw pith (CSP), graphene oxide (GO) and TiO₂ through one-step synthesis for adsorption and photocatalytic reduction of dyes. CSP and GO acted as stent and coat, respectively. TiO₂ nanoparticles attached on the surface of the adsorbent played a role in the degradation of dyes and endowed the adsorbent with hydrophobicity. When the loading of GO and TiO₂ were 5 and 20 wt.% respectively, the adsorbent had quite an ideal structure and satisfactory removal efficiency. There were an electrostatic attraction, hydrophobic and π-π interactions in the process of adsorption. The pseudo-second-order and the Langmuir model described the adsorption behaviour well. The dyes loaded on the adsorbent could be degraded by irradiation with ultraviolet light (UV). After five cycles, the removal efficiency of malachite green, methylene blue and rhodamine b by CSP-5GO-20TiO₂ decreased by 3.77%, 23.89% and 32.01%, respectively. Therefore, the bio-adsorbent has the advantages of economy, environmental protection, and the concept of sustainable development.

Carboxymethyl cellulose improved adsorption capacity of polypyrrole/CMC composite nanoparticles for removal of reactive dyes: Experimental optimization and DFT calculation

In this study, polypyrrole/carboxymethyl cellulose nanocomposite particles (PPy/CMC NPs) were synthesized and applied for removal of reactive red 56 (RR56)and reactive blue 160 (RB160) as highly toxic dyes. The amount of CMC was found significantly effective on the surface adsorption efficiency. Different optimization methods including the genetic programming, response surface methodology, and artificial neural network (ANN) were used to optimize the effect of different parameters including pH, adsorption time, initial dye concentration and adsorbent dose. The maximum adsorption of RR56 and RB160 were found under the following optimum conditions: pH of 4 and 5, adsorption time of 55 min and 52 min for RR56 and RB160, respectively, initial dye concentration of 100 mg/L and adsorbent dose of 0.09 g for both dyes. were obtained for RR56 and RB160, respectively. Also, the results indicated that ANN method could predict the experimental adsorption data with higher accuracy than other methods. The analysis of ANN results indicated that the adsorbent dose is the main factor in RR56 removal, followed by time, pH and initial concentration, respectively. However, initial concentration mostly determines the RB160 removal process. The isotherm data for both dyes followed the Langmuir isotherm model with a maximum adsorption capacity of 104.9 mg/g and 120.7 mg/g for RR56 and RB160, respectively. In addition, thermodynamic studies indicated the endothermic adsorption process for both studied dyes. Moreover, DFT calculations were carried out to obtain more insight into the interactions between the dyes and adsorbent. The results showed that the hydrogen bondings and Van der Waals interactions are dominant forces between the two studied dyes and PPy/CMC composite. Furthermore, the interaction energies calculated by DFT confirmed the experimental adsorption data, where PPy/CMC resulted in higher removal of both dyes compared to PPy. The developed nanocomposite showed considerable reusability up to 3 cylces of the batch adsorption process.

Bio-inspired materials for defluoridation of water: A review

The polluted water sources pose a serious issue concerning the various health hazards they bring along. Due to various uncontrolled anthropogenic and industrial activities, a great number of pollutants have gained entry into the water systems. Among all the emerging contaminants, anionic species such as fluoride cause a major role in polluting the water bodies because of its high reactivity with other elements. The need for water remediation has led the research community to come up with several physicochemical and electrochemical methods to remove fluoride contamination. Among the existing methods, biosorption using bio and modified biomaterials has been extensively studied for defluoridation, as they are cheap, easily available and effectively recyclable when compared to other methods for defluoridation. Adding on, these materials are non-toxic and are safe to use compared to many other synthetic materials that are toxic and require high-cost design requirements. This review focuses on the recent developments made in the defluoridation techniques by biosorption using bio and modified biomaterials and defines the current perspectives of fluoride removal specifically using biomaterials.

One-step synthesis of Fe2O3 nano-rod modified reduced graphene oxide composites for effective Cr(vi) removal: removal capability and mechanism

Reduced graphene oxide (rGO) supported Fe2O3 nanorod composites were prepared via a one-step hydrothermal method and further utilized for hexavalent chromium (Cr(vi)) removal from aqueous environments. The composite material exhibited an excellent removal efficiency for chromium (47.28 mg L-1), which was attributed to the electrostatic attraction and chemical reduction of chromium by the material. The removal mechanism was studied by SEM, BET, XPS, and FTIR. The results demonstrated that rGO was successfully modified by Fe2O3 nanorods (approximately 50 nm wide). Compared with graphene oxide (GO), the compound was much more easily separated from the solution after completing the removal. Furthermore, XPS characterization showed that Cr(vi) could also be reduced to low-toxicity Cr(iii) by hydroxyl groups. In the variables test, it was found that the removal process was pH-dependent. The results of the designed experiments for exploring the adsorption kinetics, isotherms and thermodynamics indicated that the removal process obeyed a pseudo-second-order kinetics model, Langmuir isotherm model and that it was a spontaneous exothermal process. This study provides the possibility of hydrothermal synthesis of Fe2O3/rGO for use as an excellent material to remove Cr(vi) from aqueous environments.

A green method based on electro-assisted and photo-assisted regeneration for removal of chromium(VI) from aqueous solution

In general, spent adsorbent is regenerated using high-concentration chemicals. Although chemical regeneration is efficient, it often leads to adsorbent damage and secondary waste. To overcome these problems, electro-assisted and photo-assisted regeneration were proposed in this study for the remediation of hexavalent chromium (Cr(VI)). Filter paper was decorated with polyethylene glycol (PEG) and polypyrrole (PPy) to fabricate a FP/PEG/PPy nanocomposite, which could be used as an adsorbent for Cr(VI) with a high adsorption capacity. Moreover, it could be regenerated by electro-assisted or photo-assisted regeneration to reduce eluent use. As a result, secondary waste could be greatly reduced.

Performance and mechanism of fluoride adsorption from groundwater by lanthanum-modified pomelo peel biochar

To obtain an economical and effective adsorbent for fluoride removal, lanthanum-loaded pomelo peel biochar (PPBC-La) was synthesized using a facile approach. The batch adsorption experiments were investigated to determine adsorbent performance. The PPBC-La and its pristine biochar (PPBC) were characterized by scanning electronic microscopy (SEM), zeta potential, Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) methods. Experimental results showed that the adsorption data were described well by the pseudo-second-order kinetic and Freundlich isotherm models. The maximum fluoride adsorption capacity for PPBC-La was found to be 19.86 mg/g at 25 °C and pH 6.5. The PPBC-La worked well at pH 2.4-9.6 and carried positive charge at pH < 5.8. The presence of SO₄^2-, Cl^-, and NO₃^- had a slight effect on fluoride uptake except HCO₃^- and PO₄^3-. The real groundwater study testified that 9.8 mg/L of fluoride was removed effectively at 1.0 g/L of dosage and pH 5.2. The regeneration results revealed that the PPBC-La had a good reusability. According to FTIR, XPS analysis and the anion exchange experiment, anions (NO₃^- and OH^-) exchange with fluoride ions was mainly responsible for fluoride adsorption.

Synthesis of graphene/SiO2@polypyrrole nanocomposites and their application for Cr(VI) removal in aqueous solution

A novel hybrid nanocomposite, polypyrrole nanoparticles (PPy) anchored on the graphene/silica nanosheets with the high specific surface area (polypyrrole-graphene/silica, GS-PPy), was synthesized by a facile in situ polymerization and shows great potential to remove hexavalent chromium [Cr(VI)] in aqueous solutions. Characterizations by XRD, TEM, SEM, BET, FT-IR and XPS, have confirmed that the PPy nanoparticles were well-distributed on the surface of GS nanosheets. The effects of pH, contact time, the concentration of Cr(VI), temperature, coexisting ions and the number of adsorption-desorption cycles were studied. The maximum adsorption capacity of the GS-PPy for Cr(VI) was 429.2 mg g^-1 at 298 K at pH 2, which was much higher than PPy nanoparticles and other related materials. The adsorption data fitted to the pseudo-second-order model and Langmuir isotherm model. The removal mechanism involved in electrostatic attraction, ion exchange and reduction process that partial adsorbed Cr(VI) was reduced to Cr(III). And Cr(III) was still retained on the surface of GS-PPy. The GS-PPy nanocomposite will be a potential candidate for the removal of Cr(VI) from the industrial waste water.

Radioactive iodine capture and storage from water using magnetite nanoparticles encapsulated in polypyrrole

The effective capture and storage of radioactive iodine is of importance for nuclear waste storage during nuclear power station accidents. Here we report Fe₃O₄@PPy powder containing ∼12nm magnetite (Fe₃O₄) nanoparticles encapsulated in the polypyrrole (PPy) matrix. It shows 1627mg/g uptake of iodine dissolved in water, within 2h at room temperature. Fe₃O₄@PPy is ferromagnetic in nature and can be separated from water using external magnetic field. The nitrogen gas sweeping test at 30°C shows release of 2% iodine from iodine adsorbed Fe₃O₄@PPy, revealing stable storage of iodine for a moderate period. The iodine-adsorbed magnetic powder can be regenerated by washing with ethanol. The XPS spectrum of iodine adsorbed Fe₃O₄@PPy confirmed the presence of polyiodides (I₃^- and I₅^-) bound to the PPy surface. This excellent iodine capture and storage from iodine contaminated water is an environment friendly, inexpensive and large scale method.