Effects of water quality on inactivation and repair of Microcystis viridis and Tetraselmis suecica following medium-pressure UV irradiation

Physiological and transcriptome level responses of Microcystis aeruginosa and M. viridis to environmental concentrations of triclosan

The toxicity of triclosan (TCS) to various aquatic organisms has been demonstrated at environmental concentrations. However, the effects and mechanisms of TCS on toxic cyanobacteria remains largely unexplored. This study investigated the physiological and molecular variations in two representative toxic Microcystis species (M. aeruginosa and M. viridis) under exposure to TCS for 12 d. Our findings demonstrated that the median effective concentration (EC50) of TCS for both Microcystis species were close to the levels detected in the environment (M. aeruginosa: 9.62 μg L-1; M. viridis: 27.56 μg L-1). An increased level of reactive oxygen species (ROS) was observed in Microcystis, resulting in oxidative damage when exposed to TCS at concentrations ranging from 10 μg L-1 to 50 μg L-1. The photosynthetic activity of Microcystis had a certain degree of recovery capability at low concentrations of TCS. Compared to M. aeruginosa, the higher recovery capability of the photosynthetic system in M. viridis would be mainly attributed to the increased ability for PSII repair and phycobilisome synthesis. Additionally, the synthesis of microcystins in the two species and the release rate in M. viridis significantly increased under 10-50 μg L-1 TCS. At the molecular level, exposure to TCS at EC50 for 12 d induced the dysregulation of genes associated with photosynthesis and antioxidant system. The upregulation of genes associated with microcystin synthesis and nitrogen metabolism further increased the potential risk of microcystin release. Our results revealed the aquatic toxicity and secondary ecological risks of TCS at environmental concentrations, and provided theoretical data with practical reference value for TCS monitoring.

Combination of magnetic field and ultraviolet for fouling control in saline wastewater distribution systems

Fouling is a significant challenge for recycling and reusing saline wastewaters for industrial, agricultural or municipal applications. In this study, we propose a novel approach of magnetic field (MaF) and ultraviolet (UV) combined application for fouling mitigation. Results showed, combination of MaF and UV (MaF-UV) significantly decreased the content of biofouling and reduced the complexity of microbial networks, compared to UV and MaF alone treatments. This was due to MaF as pretreatment effectively reduced the water turbidity, improve the influent water quality of UV disinfection and increases UV transmittance, eliminating the adverse impacts of UV scattering and shielding, hence increased the inactivation effectiveness of UV disinfection process. MaF assisted UV also reduced the abundance of UV-resistant bacteria and inhibited the risk of bacterial photoreactivation and dark repair. Meanwhile, MaF-UV drastically reduced the contents of precipitates and particulate fouling by accelerating the transformation rate of CaCO3 crystal from compact calcite to loosen hydrated amorphous CaCO3, and enhancing the flocculation process. These findings demonstrated that MaF-UV is an effective anti-fouling strategy, and provide insights for sustainable application of saline wastewaters.

Recent progress and challenges facing ballast water treatment - A review

The transoceanic movement of non-indigenous microorganisms and organic and inorganic contaminants through the transfer of ballast water of ocean-going vessels can be considered highly likely. The introduction of contaminants and non-indigenous microorganisms can cause changes in indigenous microorganisms, marine species, and biota, which can create problems for the ecology, economy, environment, and human health. This paper compiles and presents ballast water treatment system concepts, principles of inactivation mechanisms used, and the advantages and challenges of the treatment technologies. In addition, the paper aims to draw attention to the relationship between various organisms and the individual mechanism to be inactivated, including the effect of external factors (e.g., pH, salinity, turbidity) on inactivation efficiency. This review can assist in the choice of a suitable ballast water treatment system, taking into account the water conditions (e.g., pH, temperature, salinity) and indigenous species of the maritime areas where the ships intend to operate. This review also provides information describing the responses of the various organisms to different treatment techniques.

Genetic detection of freshwater harmful algal blooms: A review focused on the use of environmental DNA (eDNA) in Microcystis aeruginosa and Prymnesium parvum

Recurrence and severity of harmful algal blooms (HABs) are increasing due to a number of factors, including human practices and climate change. Sensitive and robust methods that allow for early and expedited HAB detection across large landscape scales are needed. Among the suite of HAB detection tools available, a powerful option exists in genetics-based approaches utilizing environmental sampling, also termed environmental DNA (eDNA). Here we provide a detailed methodological review of three HAB eDNA approaches (quantitative PCR, high throughput sequencing, and isothermal amplification). We then summarize and synthesize recently published eDNA applications covering a variety of HAB surveillance and research objectives, all with a specific emphasis in the detection of two widely problematic freshwater species, Microcystis aeruginosa and Prymnesium parvum. In our summary and conclusion we build on this literature by discussing ways in which eDNA methods could be advanced to improve HAB detection. We also discuss ways in which eDNA data could be used to potentially provide novel insight into the ecology, mitigation, and prediction of HABs.

Evaluation of three photosynthetic species smaller than ten microns as possible standard test organisms of ultraviolet-based ballast water treatment

The Ballast Water Management Convention (BWMC) establishes limits for viable organisms in discharged ballast water. However, organisms smaller than 10 μm are not considered in this regulation although they represent, in some regions, the majority of the phytoplankton organisms in marine water. The objective in this study is to assess three photosynthetic species smaller than 10 μm as potential standard test organism (STO) in experimentation focused on the inactivating efficacy of ultraviolet treatments (UV). A growth modelling method was employed to determine the reduction of the viable cell concentration under either light or dark post-treatment conditions to evaluate the importance of the photoreactivation. In spite of its moderate growth rate, the high UV resistance in combination with the abundance and worldwide distribution of Synechococcus sp. and the environmental importance of this species constitute important reasons for considering Synechococcus sp. as a valuable STO for ballast water treatment.

Natural alumina/silica suspended particles in water to enhance ofloxacin degradation with UVA-H2O2 driven by surface chemistry

UV-H₂O₂ is the most widely used oxidizing system with established effectiveness and a high level of technical development for practical application. However, little attention was paid on the effect of suspended particles in natural water on organic contaminants removal via UV-H₂O₂ technique. In this study, this effect of suspended particles to enhance the contaminant degradation was explored using silica/alumina-based oxides (MCM-41 and Al@MCM-41) as the representative. The results showed that MCM-41 had no effect on OFX degradation compared with UV-H₂O₂. While the degradation efficiency and reaction rate were greatly enhanced at a pH range of 3.0-9.0 especially at acidic pH values (3.0-5.0) in the presence of Al@MCM-41. The probe experiments proved that OFX adsorption followed by surface reaction process played an important role to enhance the performance of UV-H₂O₂. Based on the characterization results, the positive effect of suspended particles was not related to their surface area and pore size distribution, but dependent on the chemical composition and surface acid-base property. The suspended particles can provide an active surface composed of acid and base sites. The base site can create a local basic micro-environment by producing more ^•OH et al. While the dissociated acid sites in Al@MCM-41 with a negative charged surface favor OFX adsorption and then reaction with produced ROS. Our findings suggest that the enhanced performance of UVA-H₂O₂ induced by suspended particles should be concerned.

Improving the microalgae inactivating efficacy of ultraviolet ballast water treatment in combination with hydrogen peroxide or peroxymonosulfate salt

Due to the increasing number of ecosystem invasions with the introduction of exogenous species via ballast water, the International Maritime Organization adopted the Ballast Water Convention (BWMC). The BWMC establishes standards for the concentration of viable organisms in a ballast water discharge. Ultraviolet (UV) irradiation is commonly used for treating ballast water; however, regrowth after UV irradiation and other drawbacks have been reported. In this study, improvement in UV treatment with the addition of hydrogen peroxide or peroxymonosulfate salt was investigated using the microalgae Tetraselmis suecica as the target organism. Results reported that each of these reagents added in a concentration of 10 ppm reduced the concentration of initial cells by more than 96%, increased the UV inactivation rate, and enabled reaching greater level of inactivation with the treatment. These improvements imply a reduction of the UV doses required for a consistent compliance with the BWMC standards.

UV-C irradiation for harmful algal blooms control: A literature review on effectiveness, mechanisms, influencing factors and facilities

UV-C irradiation has drawn much attention in recent years as a candidate for controlling harmful algal blooms (HABs). In this review, we have collated the recent knowledge about the UV-C irradiation technique for suppressing HABs, including the effectiveness, mechanisms, influencing factors, growth recovery pattern, and UV-C irradiation facilities. Most microalgal species have been proved to be effectively suppressed by UV-C irradiation and the suppression effects had positive correlation with UV-C dose. However, the effectiveness on difference algal species varied dramatically. The understanding for growth suppression mechanisms upon UV-C irradiation has been significantly deepened beyond pyrimidine dimers. The suppression effects on algal cell density were the results of UV-induced damage on nucleic acid, light harvesting and electron transfer and transportation, nitrogen fixation and assimilation, toxin synthesis, settle ability, antioxidative capacity and cellular membrane integrity. While several influencing factors, such as algal sensitivities, UV transmittance (UVT), salinity, pH, and microalgal growth recovery should be paid attention to in practical application. UV-C facilities with high maturity, especially flow-through reactors, make it possible to develop ship-born UV-C facilities and put UV-C irradiation technique into real practice on controlling HABs.

Preparation and Characterization of Photoactive Anatase TiO2 from Algae Bloomed Surface Water

The purpose of the study was to effectively treat algae bloomed water while using a Ti-based coagulant (TiCl4) and recover photoactive novel anatase TiO2 from the flocculated sludge. Conventional jar tests were conducted in order to evaluate the coagulation efficiency, and TiCl4 was found superior compared to commercially available poly aluminum chloride (PAC). At a dose of 0.3 g Ti/L, the removal rate of turbidity, chemical oxygen demand (COD), and total phosphorus (TP) were measured as 99.8%, 66.7%, and 96.9%, respectively. Besides, TiO2 nanoparticles (NPs) were recovered from the flocculated sludge and scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX), and X-ray diffraction (XRD) analysis confirmed the presence of only anatase phase. The recovered TiO2 was found to be effective in removing gaseous CH3CHO and NOx under UV-A lamp at a light intensity of 10 W/m2. Additionally, the TiO2 mixed mortar blocks that were prepared in this study successfully removed atmospheric nitrogen oxide (NOx) under UV irradiance. This study is one of the first to prepare anatase TiO2 from flocculated algal sludge and it showed promising results. Further research on this novel TiO2 concerning internal chemical bonds and shift in the absorbance spectrum could explore several practical implications.

The growth suppression effects of UV-C irradiation on Microcystis aeruginosa and Chlorella vulgaris under solo-culture and co-culture conditions in reclaimed water

Harmful algal blooms (HABs) are serious problems in landscape waters sourced from reclaimed water. In this study, the suppression effects of UV-C irradiation on microalgal growth were researched to find a possible preventive approach. Microcystis aeruginosa and Chlorella vulgaris were exposed to UV-C irradiation and then cultured in real reclaimed water for 7-18 d. UV-C irradiation at 50-200 mJ cm^-2 could inhibit the growth of M. aeruginosa, C. vulgaris, and both microalgae in co-culture for 3-14, 1-3, and 1-5 d respectively. In addition, UV-C irradiation could cause damage to the cell integrity. At 100-200 mJ cm^-2 UV-C, the proportion of microalgal membrane damage (P_md) in M. aeruginosa cells increased rapidly to 56%-76% from day 3, whereas that in C. vulgaris cells increased to 23%-62% within 3 d. The photochemical efficiency (represented by Y value) of the irradiated groups was negatively affected immediately after UV-C irradiation and recovered gradually during the incubation. The Y value of M. aeruginosa cells began to recover from days 3 to 14, whereas that of C. vulgaris recovered much more quickly, from days 0.1 to 1. Overall, the irradiation-induced suppressive effects on algal growth correlated positively with the UV-C doses. Because M. aeruginosa was more sensitive to UV-C irradiation, UV-C irradiation not only controlled the total biomass of the mixed algae but also selectively reestablished the dominance of the nontoxic C. vulgaris.

Incubation in light versus dark affects the vitality of UV-irradiated Tetraselmis suecica differently: A flow cytometric study

In this study, we used flow cytometry to examine how incubation in dark versus light affects the vitality and viability of UV-irradiated Tetraselmis suecica. High UV doses (300 and 400 mJ/cm²) affected the esterase activity, membrane permeability, and chlorophyll content more when the subsequent incubation took place in light. For non- or low UV dose (100 and 200 mJ/cm²)-treated cells, incubation in light resulted in cell regrowth as compared to incubation in dark. Damaged cells (enzymatically active but with permeable membranes) did not recover when incubated under light or dark conditions. Exposure to light reduces the evaluation time of any given ballast water treatment, as viable cells will be detected at an earlier stage and the vitality is more affected. When evaluating the performance of UV-based ballast water treatment systems (BWTS), these results can be useful for type approval using T. suecica as a test organism in the test regime.

Reactivation of fungal spores in water following UV disinfection: Effect of temperature, dark delay, and real water matrices

The occurrence of fungi in water supply systems causes many environmental problems (e.g., odor, taste, turbidity, formation of mycotoxins); it has been an area of increasing concern in recent years. Ultraviolet irradiation can inactivate fungi efficiently. However, its reactivation poses further challenges in water purification. The reactivation characteristics of waterborne fungi under different environmental conditions have rarely been reported. In this study, the effects of temperatures and dark delay on the reactivation of three genera of fungal spores (Trichoderma harzianum, Aspergillus niger, Penicillium polonicum) were evaluated. The reactivation levels among these fungal spores were compared in phosphate buffer solution (PBS) and in real groundwater. It was found that lower temperature can inhibit the photoreactivation of fungi, whereas higher temperatures would promote the process. A long-term dark delay can inhibit the photoreactivation of fungi effectively. The dark repair of fungal spores almost do not occur neither in PBS nor in real groundwater. Finally, the photoreactivation percentage in real groundwater was higher than that in PBS. This study will provide a basis for controlling the reactivation of fungi in water.

Microorganisms in ballast water: Disinfection, community dynamics, and implications for management

Increasing concerns have accelerated the development of international regulations and methods for ballast water management to limit the introduction of non-indigenous species. The transport of microorganisms with ballast water has received scientific attention in recent years. However, few studies have focused on the importance of organisms smaller than 10 μm in diameter. In this work, we review the effects of ballast water transport, disinfection, and the release of microorganisms on ecosystem processes with a special focus on heterotrophic bacteria. It is important to evaluate both direct and indirect effects of ballast water treatment systems, such as the generation of easily degradable substrates and the subsequent regrowth of heterotrophic microorganisms in ballast tanks. Disinfection of water can alter the composition of bacterial communities through selective recolonization in the ballast water or the recipient water, and thereby affects bacterial driven functions that are important for the marine food web. Dissolved organic matter quality and quantity and the ecosystem status of the treated water can also be affected by the disinfection method used. These side effects of disinfection should be further investigated in a broader context and in different scales (laboratory studies, large-scale facilities, and on the ships).

Application of a hydroxyl-radical-based disinfection system for ballast water

A hydroxyl radical (OH) ballast water treatment system (BWTS) was developed and applied to inactivate entrained organisms in a 10,000-ton oceanic ship, where OH was produced by a strong ionization discharge combined with a water jet cavitation effect. The calculated OH generation rate was 1373.4 μM min^-1 in ballast water, which is much higher than that in other advanced oxidative processes such as photocatalysis. As a result, non-indigenous red tide algae were inactivated to meet the ballast water discharge standards (<10 cells mL^-1) of the International Maritime Organization. The ratio of variable fluorescence to maximum fluorescence (F_v/F_m) for algal chlorophyll rapidly decreased to zero within a contact time of only 6 s, indicating complete inactivation of algae. Observation under a scanning electron microscope showed no cellular materials were released by algal cells upon OH inactivation. A risk assessment of the OH treatment system was conducted, and the ratios of predicted environmental concentrations to predicted no effect concentrations of all detected disinfection byproducts were less than 1, even at a worst-case oxidant concentration of 2.41 mg L^-1. Ship ballast water treated using OH inactivation is safe for marine environments. Finally, the energy consumption and operational costs of the OH BWTS were found to be 0.033 kWh m^-3 and CNY 0.03 m^-3, respectively.

UV fluences required for compliance with ballast water discharge standards using two approved methods for algal viability assessment

This study investigates the extra UV fluence needed to meet the International Maritime Organisation's ballast water discharge standards for the 10-50 μm size-class using the approved vital stain (VS) method compared to the Most Probable Number (MPN) method for organism viability assessment. Low- and medium pressure UV collimated beam treatments were applied to natural algae collected in temperate and tropical water environments and analysed using both methods. About 10 times higher UV fluence was required to meet discharge standards when using VS compared to MPN. Implementing a dark-hold period after UV treatments decreased algal viability. Length of dark-hold period to meet discharge standards decreased with increasing UV fluence. No significant differences between temperate and tropical samples were observed. The results showed that UV treated algae assessed using the VS method could meet discharge standards by increasing fluence and/or introducing a dark-hold period.

Application of water-assisted ultraviolet light in combination of chlorine and hydrogen peroxide to inactivate Salmonella on fresh produce

With the demand for fresh produce increases in recent decades, concerns for microbiological safety of fresh produce are also raised. To identify effective ultraviolet (UV) light treatment for fresh produce decontamination, we first determined the effect of three forms of UV treatment, dry UV (samples were treated by UV directly), wet UV (samples were dipped in water briefly and then exposed to UV), and water-assisted UV (samples were treated by UV while being immersed in agitated water) on inactivation of Salmonella inoculated on tomatoes and fresh-cut lettuce. In general, the water-assisted UV treatment was found to be the most effective for both produce items. Chlorine and hydrogen peroxide were then tested to determine whether they could be used to enhance the decontamination efficacy of water-assisted UV treatment and prevent transfer of Salmonella via wash water by completely eliminating it. Neither of them significantly enhanced water-assisted UV inactivation of Salmonella on tomatoes. Chlorine significantly improved the decontamination effectiveness of the water-assisted UV treatment for baby-cut carrots and lettuce, but not for spinach. In general, the single water-assisted UV treatment and the combined treatment of water-assisted UV and chlorine were similar or more effective than the chlorine washing treatment. In most of the cases, no Salmonella was detected in the wash water when the single water-assisted UV treatment was used to decontaminate tomatoes. In a few cases when Salmonella was detected in the wash water, the populations were very low,≤2CFU/mL, and the wash water contained an extremely high level of organic load and soil level. Therefore, the single water-assisted UV treatment could potentially be used as an environmentally friendly and non-chemical alternative to chlorine washing for tomatoes after validation in industrial scale. For lettuce, spinach and baby-cut carrots, the combined treatment of water-assisted UV treatment and chlorine was needed to maintain a pathogen free environment in the wash water so that cross contamination could be prevented during fresh produce washing.