Characterization of PCDD/Fs and dioxin-like PCBs emitted from two woodchip boilers in Taiwan

Dioxin concentrations and congener distribution in biomass ash from small to large scale biomass combustion plants

Biomass plays a pivotal role in global energy production, with a significant share allocated for industrial heat and power generation. The combustion of biomass generates biomass ash, which is widely utilized as a fertiliser. However, concerns arise regarding the presence of dioxins in biomass ash, which may limit its continued use. Dioxins are toxic compounds listed under the Stockholm Convention due to their persistence and detrimental effects on human health and the environment. This study investigates the dioxin content in biomass ashes produced in various combustion plants with a capacity of 1-50MWth in Estonia, where biomass is widely used for heating and power production. The research encompassed samples from nine biomass combustion plants with varying technical parameters considering both bottom and fly ash. Dioxin concentrations were determined for 7 polychlorinated dibenzo-p-dioxins (PCDDs), 10 polychlorinated dibenzofurans (PCDFs), and 12 dioxin-like PCBs (PCBs). The results indicate that dioxin TEQ content in all samples was well below the European Union's (EU) POP Regulation limit of 5 µg TEQ/kg, with most values being at least tenfold lower. However, some samples failed to meet the EU Fertilising Products Regulation's threshold of 20 ng TEQ/kg. Notably, fly ash exhibited higher dioxin concentrations than bottom ash. While PCBs were in significant concentrations, PCDDs dominated the overall dioxin TEQ content. This study provides essential insights into the dioxin content in biomass ash and its correlation with current EU regulatory limits. It also highlights the complex distribution of dioxin congeners, particularly PCBs, within biomass ash, emphasizing the continued research's importance.

Emission and distribution characteristics of PCDD/Fs during the co-processing of various solid wastes in coal-fired boilers in China

The advancement of co-processing solid wastes in coal-fired boilers is significant for waste recycling and contributes to the sustainable development of the coal-fired power industry. However, concerns over the emission of dioxins during co-processing have prompted a comprehensive investigation into the dioxin emission properties. In this study, the PCDD/F emission concentrations of seven coal-fired boilers, including three pulverized coal boilers and four circulating fluidized bed boilers were examined. The results indicate that co-processing solid wastes in coal-fired boilers did not lead to an increase in the mass concentration of dioxins in either the flue gas or solid samples, and the international toxic equivalents (I-TEQ) of dioxins in the flue gas complied with prevailing emission standards (0.1 ng I-TEQ/Nm3) in China, proving that coal-fired boilers co-processing would not raise the emission risk of dioxins. The types of waste during co-processing had minimal effect on the I-TEQ of dioxins. A significant proportion of PCDD/Fs was observed in the ash samples, while only 13.0-25.7% and 0.7-6.8% of dioxins were distributed in the boiler slag and the flue gas, respectively. The emission factor of dioxins under the blank conditions ranged from 0.009 to 0.327 ng I-TEQ/kg-coal, while it ranged from 0.015 to 0.129 ng I-TEQ/kg-(coal+waste) under the co-processing conditions. The reduction of emission factor under co-processing condition could be attributed to the significant decrease of dioxins I-TEQ.

Health assessment of emerging persistent organic pollutants (POPs) in PM2.5 in northern and central Taiwan

Over the last two decades, Taiwan has effectively diminished atmospheric concentrations of polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) through the adept utilization of advanced technologies and the implementation of air pollution control devices. Despite this success, there exists a dearth of data regarding the levels of other PM2.5-bound organic pollutants and their associated health risks. To address this gap, our study comprehensively investigates the spatial and seasonal variations, potential sources, and health risks of PCDD/Fs, Polychlorinated biphenyls (PCBs), and Polychlorinated naphthalene (PCNs) in Northern and Central Taiwan. Sampling collections were conducted at three specific locations, including six municipal waste incinerators in Northern Taiwan, as well as a traffic and an industrial site in Central Taiwan. As a result, the highest mean values of PM2.5 (20.3-39.6 μg/m3) were observed at traffic sites, followed by industrial sites (14.4-39.3 μg/m3), and the vicinity of the municipal waste incinerator (12.4-29.4 μg/m3). Additionally, PCDD/Fs and PCBs exhibited discernible seasonal fluctuations, displaying higher concentrations in winter (7.53-11.9 and 0.09-0.12 fg I-TEQWHO/m3) and spring (7.02-13.7 and 0.11-0.16 fg I-TEQWHO/m3) compared to summer and autumn. Conversely, PCNs displayed no significant seasonal variations, with peak values observed in winter (0.05-0.10 fg I-TEQWHO/m3) and spring (0.03-0.08 fg I-TEQWHO/m3). Utilizing a Positive Matrix Factorization (PMF) model, sintering plants emerged as the predominant contributors to PCDD/Fs, constituting 77.9% of emissions. Woodchip boilers (68.3%) and municipal waste incinerators (21.0%) were identified as primary contributors to PCBs, while municipal waste incinerators (64.6%) along with a secondary copper and a copper sludge smelter (22.1%) were the principal sources of PCNs. Moreover, the study specified that individuals aged 19-70 in Northern Taiwan and those under the age of 12 years in Central Taiwan were found to have a significantly higher cancer risk, with values ranging from 9.26 x 10-9-1.12 x 10-7 and from 2.50 x 10-8-2.08 x 10-7respectively.

Effects of increasing chlorine concentration in feedstock on the emission and distribution characteristic of dioxins in circular fluidized bed boiler

Field studies were conducted to study the emission and distribution characteristics of dioxins by elevating the chlorine concentration in feedstock in a circular fluidized bed boiler. The concentration and total equivalent quantity of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in all flue gas, electrostatic ash, bag filter ash, and bottom ash samples under blank condition (i.e., feedstock was normal coal) and chlorine labeling condition (i.e., feedstock mixed with coal and chlorine-containing labeling agent) were analyzed. Results illustrated that the concentration of PCDD/Fs in all gaseous and ash samples increased with the addition of chlorine in feedstock, with the largest and least increment in dioxin concentration observed in electrostatic ash and flue gas. PCDDs were the predominate congeners in flue gas, accounted for 50.1-60.4% of the total PCDD/F concentration under chlorine labeling and blank conditions, while PCDD/F distribution changed from PCDD- to PCDF-predominate by increasing chlorine content in feedstock under all field test conditions: 46.6-92.9%, 34.0-76.1%, and 47.0-53.1% of PCDFs were distributed in electrostatic ash, bag filter ash, and bottom ash, respectively. Highly chlorinated PCDD/F congeners such as O₈CDD/F and 1,2,3,4,6,7,8-H₇CDD/F were the primary contributors to dioxin concentration in flue gas and bottom ash samples, whereas low-chlorinated 2,3,7,8-T₄CDF and 1,2,3,7,8-P₅CDF congeners became critically dominating in electrostatic and bag filter ash.

Emission characteristics of polychlorinated dibenzo-p-dioxins and dibenzofurans from industrial combustion of biomass fuels

Although biomass fuel has always been regarded as a source of sustainable energy, it potentially emits polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated PCDD/F emissions from industrial boilers fired with three types of biomass fuel (i.e., bagasse, coffee residue, and biomass pellets) via stack sampling and laboratory analysis. The measured mass concentrations of PCDD/Fs varied among the boilers from 0.0491 to 12.7 ng Nm^-3 (11% O₂), with the calculated average international toxic equivalent quantity (I-TEQ) from 0.00195 to 1.71 ng I-TEQ Nm^-3 (11% O₂). Some of them were beyond the limit value for municipal waste incineration. 2,3,4,7,8-PeCDF could be used as a good indicator of dioxin-induced toxicity of stack flue gases from biomass-fired boilers. The PCDFs/PCDDs ratios were more than 1, likely indicating the formation of dioxins in the boilers favored by de novo synthesis. The emission factor (EF) of total PCDD/Fs averaged 5.35 ng I-TEQ kg^-1 air-dry biomass (equivalent to 39.0 ng kg^-1 air-dry biomass). Specifically, the mean EF was 6.94 ng I-TEQ kg^-1 (52.6 ng kg^-1) for biomass-pellet-fired boiler, 11.8 ng I-TEQ kg^-1 (74.6 ng kg^-1) for coffee-residue -fired boiler, and 0.0277 ng I-TEQ kg^-1 (0.489 ng kg^-1) for bagasse-fired boilers. The annual PCDD/F emission was estimated to be 208 g I-TEQ in 2020 in China, accounting for approximately 2% of the total national annual emission of PCDD/Fs. The results can be used to develop PCDD/Fs emission inventories and offer valuable insights to authorities regarding utilizing biomass in industry in the future.

Feasible and effective control strategies on extreme emissions of chlorinated persistent organic pollutants during the start-up processes of municipal solid waste incinerators

A typical two-day start-up of municipal solid waste incinerators (MSWIs) can yield polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) and polychlorinated biphenyl (PCB) emission quantities around 10 times higher than those from an entire year of normal operations, as measured in this study. Thus, we tested specific control strategies for inhibiting the formation of chlorinated persistent organic pollutants (Cl-POPs), namely, extensively cleaning the ash accumulated beneath the furnace bed of the combustion chamber and deposited on the walls of the superheater and economizer and shortening the residence time of the flue gas in the optimal temperature window for Cl-POP formation. Also, we advanced the injection times of the activated carbon and lime slurry to lower Cl-POP emissions during start-up. Our findings show that these strategies were highly effective and reduced the Cl-POP emissions by > 98%, most of which (96.4-98.2%) was attributable to inhibiting formation. In summary, the proposed control strategies require no modifications to existing air pollution control devices, have little influence on operational cost, and are effective and feasible for the majority of MSWIs.

Emission characteristics of dl-PCNs, PCDD/Fs, and dl-PCBs from secondary copper metallurgical plants: Control technology and policy

This study investigated the characteristics of dl-PCNs, PCDD/Fs and dl-PCBs emitted from two typical secondary copper metallurgical plants processing copper sludge equipped with different sets of air pollution control devices (APCDs). Results indicated that the emission factors of dl-PCNs and PCDD/Fs of plant A are 0.00775 and 1.09 μg TEQ/ton, respectively, which are remarkably lower than those of plant B (3.12, 181 and 25.5 μg TEQ/ton for dl-PCNs, PCDD/Fs and dl-PCBs, respectively). Dl-PCNs contributed 0.7-2.7% of total TEQ for flue gases and up to 2.6% of TEQ for ash samples. The TEQ concentration of dl-PCNs in fly ash individually exceeds the regulated level of 1 ng TEQ/g regulated by Taiwan EPA, indicating that emission and discharge of dl-PCNs should be regulated. The combination of semidry scrubber and activated carbon injection (ACI) + baghouse (BH) is effective for simultaneous removals of dl-PCNs and PCDD/Fs in plant A; while the combination of cyclone, secondary combustion chamber, ACI + BH and wet scrubber (WS) is not optimal for removing dl-PCNs, PCDD/Fs and dl-PCBs. Memory effect occurring within BH and WS is responsible for low removal efficiencies of these POPs in plant B. This study suggests appropriate APCDs for simultaneous removal of three POP groups and recommends the inclusion of dl-PCNs in emission standard.

Reduction of polychlorinated naphthalenes (PCNs) emission from municipal waste incinerators in Taiwan: Recommendation on control technology

Emission factor and removal efficacy of PCNs are evaluated via the flue gas sampling of two MWIs equipped with different air pollution control devices (APCDs) in Taiwan. MWI-A is equipped with ESP, wet scrubber (WS) and selective catalytic reduction (SCR), while cyclone (CY), semi-dry absorber (SDA), activated carbon injection (ACI) and baghouse (BH) are employed in MWI-B. The average concentrations of PCNs measured at stacks of MWI-A and MWI-B are 2.1 ng Nm^-3 (0.218 pg TEQ Nm^-3) and 23.2 ng Nm^-3 (0.425 pg TEQ Nm^-3), respectively. The emission factors of PCNs calculated from feeding rates of waste and stack sampling results range from 6.7 to 6.95 μg t^-1 (0.790-1.45 ng TEQ t^-1). PCNs are formed in ESP via chlorination, while SCR and SDA + ACI + BH are effective in removing PCNs with the overall efficacies of 97.6% and 94.3%, respectively. PCN removal efficiencies achieved with SCR and SDA + ACI + BH increase as chlorination level increases. Specifically, around 72% and 82% of Mono-CN are removed by SCR and SDA + ACI + BH, respectively. The removal efficacies of other homologues achieved with SCR are consistently high (96-100%). Dominances of Mono-to Tri-CNs in scrubbing liquid collected from WS and higher removal efficacies of these homologues achieved with WS + ESP compared with ESP alone indicate that WS can capture low chlorinated PCNs to some extent. The results suggest that CY + SDA + ACI + BH should be equipped in MWI for effective removal of PCNs, while ESP, WS and SCR should be utilized with precaution to eliminate PCNs formation and enhance the PCNs removal efficiency.

Insights into PCDD/Fs and PAHs in Biomass Boilers Envisaging Risks of Ash Use as Fertilizers

Since ashes are a possible source of Persistent Organic Pollutants (POPs) contamination, their application in soils must be subject to more study and control. In this scope, feed residual forest biomasses and biomass ashes, collected along one year in four biomass power stations, were characterized mainly for their polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) and Polycyclic Aromatic Hydrocarbons (PAHs) contents. The biomasses present concerning levels of Cl (0.04–0.28%) that may lead to PCDD/Fs formation. The biomasses also contain OCDD (29–260 ng/kg) and 1,2,3,4,6,7,8-HpCDD (35 ng/kg) that may contribute to increased Toxic Equivalents (TEQs) of ashes, possibly involving dechlorination and ash enrichment mechanisms. While the WHO2005-TEQs in bottom ashes (14–20 ng TEQ/kg) reaches the proposed limit (20 ng TEQ/kg) for ash use as fertilizers, in fly ashes (35–1139 ng TEQ/kg) the limit is exceeded. PAHs are below 0.02 mg/kg in bottom ashes and 1.5–2.5 mg/kg in fly ashes, complying with the proposed limit of 6 mg/kg. As bottom and fly ash streams may contain different ash flows, a clear definition of ash mixes is required. Correlations between unburned carbon (C), PAHs and PCDD/Fs were not found, which highlights the need for compulsory PCDD/Fs analysis in ashes, independently of their origin, burnout degree or levels of other contaminants. A sensitivity analysis was performed to evaluate the impact of handling non-detected values, which showed more impact for TEQs values close to the proposed regulatory limit of PCDD/Fs. These findings highlight the need to define reporting protocols of analytical results for risk assessments and conformity evaluation.

Lactational exposure to dioxin-like polychlorinated biphenyl 169 and nondioxin-like polychlorinated biphenyl 155: Effects on rat femur growth, biomechanics and mineral composition

Exposure to polychlorinated biphenyls (PCBs), which are persistent lipophilic environmental pollutants, has a variety of adverse effects on wildlife and human health, including bone mineralization, growth and mechanical strength. The present study evaluated the effects of lactational exposure to nondioxin-like PCB-155 and dioxin-like PCB-169, individually and in combination, on pubertal rat femur development and its biomechanics. After offspring delivery, Wistar rat mothers were divided into four groups, i.e., PCB-169, PCB-155, PCB-155+169 and control, and were administered PCBs intraperitoneally. Data on bone geometry, biomechanics and mineral composition were obtained by analysis of femurs from 42-day-old offspring by microCT scanning, three-point bending test and inductively coupled plasma mass spectrometry. Decreased somatic mass and femur size, i.e., mass, periosteal circumference and cross sectional area, were observed in the PCB-169 and PCB-155 groups. Additionally, lactational exposure to planar PCB-169 resulted in harder and more brittle bones containing higher amounts of minerals. Combined exposure to structurally and functionally different PCBs demonstrated only mild alterations in bone width and mineralization. To conclude, our results demonstrated that alterations, observed on postnatal day 42, were primarily induced by PCB-169, while toxicity from both of the individual congeners may have been reduced in the combined group.

Characterization of PCDD/Fs and dioxin-like PCBs in flue gas from thermal industrial processes in Vietnam: A comprehensive investigation on emission profiles and levels

The emission profiles and levels of unintentionally produced persistent organic pollutants (U-POPs) comprising polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) were comprehensively investigated in flue gas released from 20 facilities belonging to 11 thermal industrial processes in Vietnam. Levels and patterns of PCDD/Fs and dl-PCBs in flue gas samples varied widely between sectors and different facilities in the same sector, suggesting different formation mechanisms involved. Flue gas concentrations of PCDD/Fs and dl-PCBs generally decreased in the order: industrial waste incinerator > secondary zinc production > coal fired craft boiler > coal fired power plant ≈ medical waste incinerator > steel production ≈ cement production > secondary copper production > coal fired industrial boiler > secondary tin production ≈ municipal waste incinerator. Results obtained from diagnostic ratio and fingerprint analysis have revealed that the stack emissions of PCDD/Fs and dl-PCBs were probably attributed to the de novo formation and incomplete destruction of input materials containing technical PCB oils or paints. The average emission factors of PCDD/Fs and dl-PCBs ranged from 0.011 to 374 μg WHO-TEQ tonne^-1 for the studied facilities. A total emission amount of 4.89-11.4 g WHO-TEQ year^-1 was estimated for the 20 facilities investigated in our study. This is the first comprehensive investigation on the unintentional emissions of PCDD/Fs and dl-PCBs from a wide range of industrial sectors in Vietnam.

Residue concentrations and profiles of PCDD/Fs in ash samples from multiple thermal industrial processes in Vietnam: Formation, emission levels, and risk assessment

The residue concentrations and congener profiles of polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) were examined in fly ash and bottom ash released from different thermal industrial processes in Vietnam. PCDD/F concentrations and toxic equivalents (TEQs) in the ash samples varied greatly and decreased in the following order: steel making > aluminum recycling > medical waste incinerator > boilers > municipal waste incinerator > tin production > brick production > coal-fired power plant. Both the precursor and de novo synthesis were estimated as possible formation mechanisms of dioxins in the ash, but the latter pathway was more prevalent. The highest emission factors were estimated for the ash released from some steel-making plants, aluminum-recycling facilities, and a medical waste incinerator. The emission factors of PCDD/Fs in ash released from some steel plants of this study were two to six times higher than the UNEP Toolkit default value. The annual emission amount of ash-bound dioxins produced by 15 facilities in our study was estimated to be 26.2 to 28.4 g TEQ year^-1, which mainly contributed by 3 steel plants. Health risk related to the dioxin-containing ash was evaluated for workers at the studied facilities, indicating acceptable risk levels for almost all individuals. More comprehensive studies on the occurrence and impacts of dioxins in waste streams from incineration and industrial processes and receiving environments should be conducted, in order to promote effective waste management and health protection scheme for dioxins and related compounds in this rapidly industrializing country.

Assessment of pops contaminated sites and the need for stringent soil standards for food safety for the protection of human health

Persistent organic pollutants (POPs) including PCDD/Fs, PCBs and organochlorine pesticides (OCPs) are among the most important and hazardous pollutants of soil. Food producing animals such as chicken, beef, sheep and goats can take up soil while grazing or living outdoors (free-range) and this can result in contamination. In recent decades, large quantities of brominated flame retardants such as polybrominated diphenyl ethers (PBDEs), short-chain chlorinated paraffins (SCCPs) and per- and polyfluorinated alkylated substances (PFAS) have been produced and released into the environment and this has resulted in widespread contamination of soils and other environmental matrices. These POPs also bioaccumulate and can contaminate food of animal origin resulting in indirect exposure of humans. Recent assessments of chicken and beef have shown that surprisingly low concentrations of PCBs and PCDD/Fs in soil can result in exceedances of regulatory limits in food. Soil contamination limits have been established in a number of countries for PCDD/Fs but it has been shown that the contamination levels which result in regulatory limits in food (the maximum levels in the European Union) being exceeded, are below all the existing soil regulatory limits. 'Safe' soil levels are exceeded in many areas around emission sources of PCDD/Fs and PCBs. On the other hand, PCDD/F and dioxin-like PCB levels in soil in rural areas, without a contamination source, are normally safe for food producing animals housed outdoors resulting in healthy food (e.g. meat, eggs, milk). For the majority of POPs (e.g. PBDEs, PFOS, PFOA, SCCP) no regulatory limits in soils exist. There is, therefore, an urgent need to develop appropriate and protective soil standards minimising human exposure from food producing animals housed outdoors. Furthermore, there is an urgent need to eliminate POPs pollution sources for soils and to control, secure and remediate contaminated sites and reservoirs, in order to reduce exposure and guarantee food safety.

Atmospheric concentrations and gas-particle partitioning of PCDD/Fs and dioxin-like PCBs around Hochiminh city

Atmospheric PCDD/Fs and dl-PCBs samples were collected in Hochiminh city, Vietnam to address the effect of meteorological parameters, especially rainfall, on the occurrence and gas/particle partitioning of these persistent organic pollutants. The results indicate that PCDD/Fs and dl-PCBs concentrations in industrial site are higher than those measured in commercial and rural sites during both rainy and dry seasons. In terms of mass concentration, ambient PCDD/F levels measured in dry season are significantly higher than those measured in rainy season while dl-PCB levels do not vary significantly between rainy and dry seasons. The difference could be attributed to different gas/particle partitioning characteristics between PCDD/Fs and dl-PCBs. PCDD/Fs are found to be mainly distributed in particle phase while dl- PCBs are predominantly distributed in gas phase in both rainy and dry seasons. Additionally, Junge-Pankow and Harner-Bidleman models are applied to better understand the gas/particle partitioning of these pollutants in atmosphere. As a results, both PCDD/Fs and dl-PCBs are under non-equilibrium gas/particle partitioning condition, and PCDD/Fs tend to reach equilibrium easier in rainy season while there are no clear trend for dl-PCBs. Harner-Bidleman model performs better in evaluating the gas/particle partitioning of PCDD/Fs while Junge-Pankow model results in better prediction for dl-PCBs.

Characteristics of atmospheric polychlorinated naphthalenes (PCNs) collected at different sites in northern Taiwan

Ambient air samples were collected simultaneously at three sites in northern Taiwan using high-volume samplers during winter and summer to evaluate the atmospheric PCN characteristics including concentration, distribution, potential sources and gas/particle partitioning. The average concentration (Σ73 PCNs from di-to octa-CN) observed at industrial site is the highest (172 ± 111 pg m^-3), while PCN levels measured at urban and rural sites are comparable (45.2 ± 8.20 and 45.9 ± 24.4 pg m^-3, respectively). The PCN concentrations are higher in summer compared with those measured in winter for all three sampling sites. Gas-phase PCNs predominate in ambient air, accounting for 94 ± 6.0% of total concentration. Homologue distributions of PCNs measured at industrial site are different from two other sites for both gas and particulate phases, suggesting that different sources contribute to PCNs collected at industrial site. Based on the ratios of characteristic PCN congeners and fraction of Σcombustion-related PCNs/ΣPCNs, thermal processes are identified as major sources of PCNs at industrial site. PCNs collected at urban and rural sites are mixed sources of thermal emissions and evaporation, however, more influence of thermal sources in winter and more impact of evaporation sources in summer are observed. Results of the logK_p-logP_L relationship indicate that both adsorption and absorption govern gas/particle partitioning of atmospheric PCNs in northern Taiwan. Furthermore, the relationship between logK_p and logK_OA reveals that absorption is more important in governing gas/particle partitioning of PCNs in winter compared to summer.

Reviewing the relevance of dioxin and PCB sources for food from animal origin and the need for their inventory, control and management

BACKGROUND

In the past, cases of PCDD/F and PCB contamination exceeding limits in food from animal origin (eggs, meat or milk) were mainly caused by industrially produced feed. But in the last decade, exceedances of EU limit values were discovered more frequently for PCDD/Fs or dioxin-like(dl)-PCBs from free range chicken, sheep, and beef, often in the absence of any known contamination source.

RESULTS

The German Environment Agency initiated a project to elucidate the entry of PCBs and PCDD/Fs in food related to environmental contamination. This paper summarizes the most important findings. Food products from farm animals sensitive to dioxin/PCB exposure-suckling calves and laying hens housed outdoor-can exceed EU maximum levels at soil concentrations that have previously been considered as safe. Maximum permitted levels can already be exceeded in beef/veal when soil is contaminated around 5 ng PCB-TEQ/kg dry matter (dm). For eggs/broiler, this can occur at a concentration of PCDD/Fs in soil below 5 ng PCDD/F-PCB-TEQ/kg dm. Egg consumers-especially young children-can easily exceed health-based guidance values (TDI). The soil-chicken egg exposure pathway is probably the most sensitive route for human exposure to both dl-PCBs and PCDD/Fs from soil and needs to be considered for soil guidelines. The study also found that calves from suckler cow herds are most prone to the impacts of dl-PCB contamination due to the excretion/accumulation via milk. PCB (and PCDD/F) intake for free-range cattle stems from feed and soil. Daily dl-PCB intake for suckler cow herds must in average be less than 2 ng PCB-TEQ/day. This translates to a maximum concentration in grass of 0.2 ng PCB-TEQ/kg dm which is less than 1/6 of the current EU maximum permitted level. This review compiles sources for PCDD/Fs and PCBs relevant to environmental contamination in respect to food safety. It also includes considerations on assessment of emerging POPs.

CONCLUSIONS

The major sources of PCDD/F and dl-PCB contamination of food of animal origin in Germany are (1) soils contaminated from past PCB and PCDD/F releases; (2) PCBs emitted from buildings and constructions; (3) PCBs present at farms. Impacted areas need to be assessed with respect to potential contamination of food-producing animals. Livestock management techniques can reduce exposure to PCDD/Fs and PCBs. Further research and regulatory action are needed to overcome gaps. Control and reduction measures are recommended for emission sources and new listed and emerging POPs to ensure food safety.