Membrane fouling control and enhanced removal of pharmaceuticals and personal care products by coagulation-MBR

Investigation of the performance of the combined moving bed bioreactor-membrane bioreactor (MBBR-MBR) for textile wastewater treatment

The present study focused on the investigation of the performance of a Moving Bed Bioreactor coupled with a Membrane Bioreactor (MBBR-MBR) on a small scale for textile wastewater treatment. The parameters examined in this study included the removal efficiency of chemical oxygen demand (COD), biochemical oxygen demand (BOD), total suspended solids (TSS), turbidity, color, and heavy metals (HM). The two reactors were operated consecutively and maintained aerobic conditions. The idea is to reduce the pollutant load significantly through the activity of microorganism attached to the biofilm covered carriers in MBBR and successive membrane filtration. The system demonstrated a favorable outcome even in a smaller hydraulic retention time (HRT) of 1 day, which presents a significant advantage in terms of cost and space saving. The removal effectiveness of COD attained a maximum of 92 %, BOD reached a maximum of 95 %, and the color removal performance obtained a removal efficiency of 87 %. Furthermore, the treatment showed remarkable efficiency in removing up to 100 % of TSS and 96 % of turbidity. Additionally, an evaluation was conducted on the elimination of heavy metals, including Zinc (Zn), Lead (Pb), Chromium (Cr), and Iron (Fe). The efficacy of removing these HMs was found to exceed 85 %. All these favorable outcomes contribute to the improvement of effluent quality, mitigation of contamination hazards, and fouling reduction.

Occurrence and fate of pharmaceutical pollutants in wastewater: Insights on ecotoxicity, health risk, and state-of-the-art removal

Pharmaceutical active compound (PhAC) residues are considered an emerging micropollutant that enters the aquatic environment and causes harmful ecotoxicity. The significant sources of PhACs in the environment include the pharmaceutical industry, hospital streams, and agricultural wastes (animal husbandry). Recent investigations demonstrated that wastewater treatment plants (WWTPs) are an important source of PhACs discharging ecosystems. Several commonly reported that PhACs are detected in a range level from ng L-1 to μg L-1 concentration in WWTP effluents. These compounds can have acute and chronic adverse impacts on natural wildlife, including flora and fauna. The approaches for PhAC removals in WWTPs include bioremediation, adsorption (e.g., biochar, chitosan, and graphene), and advanced oxidation processes (AOPs). Overall, adsorption and AOPs can effectively remove PhACs from wastewater aided by oxidizing radicals. Heterogeneous photocatalysis has also proved to be a sustainable solution. Bioremediation approaches such as membrane bioreactors (MBRs), constructed wetlands (CWs), and microalgal-based systems were applied to minimize pharmaceutical pollution. Noteworthy, applying MBRs has illustrated high removal efficiencies of up to 99%, promising prospective future. However, WWTPs should be combined with advanced solutions, e.g., AOPs/photodegradation, microalgae-bacteria consortia, etc., to treat and minimize their accumulation. More effective and novel technologies (e.g., new generation bioremediation) for PhAC degradation must be investigated and specially designed for a low-cost and full-scale. Investigating green and eco-friendly PhACs with advantages, e.g., low persistence, no bioaccumulation, less or non-toxicity, and environmentally friendly, is also necessary.

Biochar mediated high-rate anaerobic bioreactors: A critical review on high-strength wastewater treatment and management

Treatment of high-strength wastewater is critical for the aquatic environment and receiving water bodies around the globe. Untreated or partially treated high-strength wastewater may cause severe damage to the existing water bodies. Various high-rate anaerobic bioreactors have been developed in the last decades for treating high-strength wastewater. High-rate anaerobic bioreactors are effective in treating industrial wastewater and provide energy in the form of methane as well. However, the physical or chemical properties of high-strength industrial wastewater, sometimes, disrupt the functioning of a high-rate anaerobic bioreactor. For example, the disintegration of granular sludge in up flow anaerobic sludge blanket reactor or membrane blocking in an anaerobic membrane bioreactor are the results of a high-strength wastewater treatment which hamper the proper functioning and may harm the wastewater treatment plant economically. Biochar, if added to these bioreactors, may help to alleviate the ill-functioning of high-rate anaerobic bioreactors. The primary mechanisms by biochar work in these bioreactors are direct interspecies electron transfer, microbial immobilization, or gene level alternations in microbial structure. The present article explores and reviews the recent application of biochar in a high-rate anaerobic bioreactor treating high-strength industrial wastewater.

Fur flutter in fluid flow fends off foulers

The fouling of submerged surfaces detrimentally alters stratum properties. Inorganic and organic foulers alike attach to and accumulate on surfaces when the complex interaction between numerous variables governing attachment and colonization is favourable. Unlike naturally evolved solutions, industrial methods of repellence carry adverse environmental impacts. Mammal fur demonstrates high resistance to fouling; however, our understanding of the intricacies of such performance remains limited. Here, we show that the passive trait of fur to dynamically respond to an external flow field dramatically improves its anti-fouling performance over that of fibres rigidly fixed at both ends. We have previously discovered a statistically significant correlation between a group of flow- and stratum-related properties, and the quantified anti-fouling performance of immobile filaments. In this work, we improve the correlation by considering an additional physical factor, the ability of hair to flex. Our work establishes a parametric framework for the design of passive anti-fouling filamentous structures and invites other disciplines to contribute to the investigation of the anti-fouling prowess of mammalian interfaces.

Modified polymer membranes for the removal of pharmaceutical active compounds in wastewater and its mechanism-A review

Membrane technology can play a suitable role in removing pharmaceutical active compounds since it requires low energy and simple operation. Even though membrane technology has progressed for wastewater applications nowadays, modifying membranes to achieve the strong desired membrane performance is still needed. Thus, this study overviews a comprehensive insight into the application of modified polymer membranes to remove pharmaceutical active compounds from wastewater. Biotoxicity of pharmaceutical active compounds is first prescribed to gain deep insight into how membranes can remove pharmaceutical active compounds from wastewater. Then, the behavior of the diffusion mechanism can be concisely determined using mass transfer factor model that represented by β and B with value up to 2.004 g h mg-1 and 1.833 mg g-1 for organic compounds including pharmaceutical active compounds. The model refers to the adsorption of solute to attach onto acceptor sites of the membrane surface, external mass transport of solute materials from the bulk liquid to the membrane surface, and internal mass transfer to diffuse a solute toward acceptor sites of the membrane surface with evidenced up to 0.999. Different pharmaceutical compounds have different solubility and relates to the membrane hydrophilicity properties and mechanisms. Ultimately, challenges and future recommendations have been presented to view the future need to enhance membrane performance regarding fouling mitigation and recovering compounds. Afterwards, the discussion of this study is projected to play a critical role in advance of better-quality membrane technologies for removing pharmaceutical active compounds from wastewater in an eco-friendly strategy and without damaging the ecosystem.

Biological processes modelling for MBR systems: A review of the state-of-the-art focusing on SMP and EPS

A mathematical correlation between biomass kinetic and membrane fouling can improve the understanding and spread of Membrane Bioreactor (MBR) technology, especially in solving the membrane fouling issues. On this behalf, this paper, produced by the International Water Association (IWA) Task Group on Membrane modelling and control, reviews the current state-of-the-art regarding the modelling of kinetic processes of biomass, focusing on modelling production and utilization of soluble microbial products (SMP) and extracellular polymeric substances (EPS). The key findings of this work show that the new conceptual approaches focus on the role of different bacterial groups in the formation and degradation of SMP/EPS. Even though several studies have been published regarding SMP modelling, there still needs to be more information due to the highly complicated SMP nature to facilitate the accurate modelling of membrane fouling. The EPS group has seldom been addressed in the literature, probably due to the knowledge deficiency concerning the triggers for production and degradation pathways in MBR systems, which require further efforts. Finally, the successful model applications showed that proper estimation of SMP and EPS by modelling approaches could optimise membrane fouling, which can influence the MBR energy consumption, operating costs, and greenhouse gas emissions.

Research progress of electrically-enhanced membrane bioreactor (EMBR) in pollutants removal and membrane fouling alleviation

Membrane bioreactor (MBR), as a biological unit for wastewater treatment, has been proven to have the advantages of simple structure and high pollutant removal rate. However, membrane fouling limits its wide application, and it is crucial to adopt effective membrane fouling control methods. As a new type of membrane fouling control technology, electrically-enhanced MBR (EMBR) has attracted more interest recently. It uses the driving force of electric field to make pollutants flocculate or move away from the membrane surface to achieve the purpose of inhibiting membrane fouling. This paper expounds the configuration of EMBR in recent years, including the location of membrane components, the way of electric field application and the selection of electrode and membrane materials, and provides the latest development information in various aspects. The enhanced effect of electric field on the removal of comprehensive and refractory pollutants is outlined in detail. And from the perspective of sludge properties (EPS, SMP, sludge particle size, zeta potential and microbial activity), the influence of electric field on sludge characteristics and the relationship between the changes of sludge properties in EMBR and membrane fouling are discussed. Moreover, the electrochemical mechanisms of electric field alleviating membrane fouling are elucidated from electrophoresis, electrostatic repulsion, electroflocculation, electroosmosis, and electrochemical oxidation, and the regeneration and stability of EMBR are assessed. The existing challenges and future research directions are also proposed. This review could provide theoretical guidance and further studies for subsequent topic, and promoting the wide engineering applications of EMBR.

Infrared spectroscopy: the key to elucidating the sorption mechanism of surfactants, dyes and pharmaceuticals on mineral composite material

There is a global problem with the effective purification of wastewater containing organic compounds, including dyes, pharmaceuticals and surfactants. Therefore, technologies for the removal of pollutants are still being explored. One of the promising methods could be the application of mineral sorbent composite based on lignite and bentonite. However, it is crucial to comprehensively recognize the mechanisms responsible for immobilizing organic compounds using mineral composite sorbents. The purpose of this work was to prepare and investigate the sorption mechanism of lignite-bentonite composite (BL) sorbents for the removal of dyes: Rhodamine B (RB), Remazol Brilliant Blue R (RBBR), pharmaceuticals: ibuprofen (IB), sulfamethoxazole (STX) and surfactant sodium dodecylbenzenesulfonate (SDBS). The quantitative sorption results have been performed using the high-performance liquid chromatography (HPLC) method. The application of infrared (IR) spectroscopy method was crucial to describe the sorption mechanism. After completing the sorption test, the spectra for the sorbents revealed bands associated with adsorbed RB, RBBR, IB, STX, and SDBS on the BL sorbent. Because lignite is predominated in BL composite, the sorption capacity and mechanism strictly correspond to its sorption properties rather than to bentonite ones. The spectra results indicate that the physical sorption process related to electrostatic forces, hydrogen bonding, and dispersion interactions are predominantly responsible for the immobilization of organic compounds tested on mineral sorbents. The X-ray diffraction (XRD) results indicate the ion exchange process involved in the case of RB adsorption on the bentonite sample. Nevertheless, the sorption mechanism was complex because of the extensive sorption properties of mineral composite and the different chemical properties of the tested organic compounds. The results of our spectroscopic studies help interpret the sorption mechanisms of organic compounds on mineral materials.

Individual and synergic effect of carbamazepine and diclofenac in the removal of organic matter from an expanded granular bed anaerobic reactor

Due to the negative effects caused to the natural environment by the presence of pharmaceutical-type traces and other pollutants in wastewater, it is necessary to develop and optimize efficient treatment systems. This study evaluated the effect of carbamazepine (CBZ) and diclofenac (DCF) on the behavior of seven EGSB (expanded granular sludge bed) anaerobic reactors at laboratory scale, using chromatographic and physicochemical analyses of the influent, effluent, and the biomass contained in the reactors. The results showed that CBZ had a greater effect on the removal and behavior of microorganisms than DCF, with average efficiencies of 34.04 ± 18.58%, 20.76 ± 8.51% and 16.29 ± 11.08% during stage II, III and IV, respectively, for CBZ, and 92.37 ± 12.74%, 26.77 ± 5.90% and 22.28 ± 9.60% during stage II, III and IV, respectively, for DCF. Additionally, it was found that the interaction of the co-substrate used (sodium acetate) in conjunction with the pharmaceutical compounds decreased the efficiency of the system in terms of the removal of analytes.

Effects of pharmaceuticals on membrane bioreactor: Review on membrane fouling mechanisms and fouling control strategies

Pharmaceuticals have become contaminants of emerging concern due to their toxicity towards aquatic life and pseudo persistent nature in the environment. Membrane bioreactor (MBR) is one such technology that has the potential to act as a barrier against the release of pharmaceuticals into the environment. Fouling is the deposition of the constituents of the mixed liquor on the membrane surface and it limit the world-wide applicability of MBRs. To remove foulant layer, aggressive chemicals and extra cost consideration in terms of energy are required. Extracellular polymeric substances (EPS) and soluble microbial products (SMP) are recognized as principal foulants. Presence of pharmaceuticals has been found to increase the fouling in MBRs. Fouling aggravates in proportion to the concentration of pharmaceuticals. Pharmaceuticals exert chemical stress in microbes, hence forcing them to secrete more EPS/SMP. Pharmaceuticals alter the composition of the foulants and affect microbial metabolism, thereby inflicting direct/indirect effects on fouling. Pharmaceuticals have been found to increase or decrease the size of sludge flocs, however the exact mechanism that govern the floc size change is yet to be understood. Different techniques such as coupling advanced oxidation processes with MBR, adding activated carbon, bioaugmenting MBR with quorum quenching strains have shown to reduce fouling in MBRs treating pharmaceutical wastewater. These fouling mitigation techniques work on reducing the EPS/SMP concentration, thereby alleviating fouling. The present review provides a comprehensive understanding of the effects induced by pharmaceuticals in the activated sludge characteristics and identifying the fouling mechanism. Furthermore, significant knowledge gaps and recent advances in fouling mitigation strategies are discussed. This review has also made an effort to highlight the positive aspect of the foulant layer in retaining pharmaceuticals and antibiotic resistance genes, thereby suggesting a possible delicate trade-off between the flux decline and enhanced removal of pharmaceuticals.

Efficient bio-refractory industrial wastewater treatment with mitigated membrane fouling in a membrane bioreactor strengthened by the micro-scale ZVI@GAC galvanic-cells-initiated radical generation and coagulation processes

Micro-scale ZVI@GAC-based iron-carbon galvanic-cells (ZVI@GACs) were prepared with the Ca-Si-H/Ca-H formation process and first applied to initiate radical generation and coagulation processes in MBR for treating bio-refractory industrial wastewater (IWW). Batch tests revealed the H2O2 production (0.19-0.28 mg/L) and •OH generation (p-CBA decay, k1 = 0.040 min-1) in ZVI@GACs-dosed system (packing volume of 5%) under aeration. Adoption of ZVI@GACs into aerobic activated sludge process (ZVI@GACs/AS) enhanced TOC degradation (k2) and phenolic compounds (PHENs) destruction (k3). ZVI@GACs/AS at ZVI@GACs packing volume of 5%, 10% and 20% improved k2 from 0.11 h-1 (bare AS) to 0.17, 0.21 and 23 h-1 and k3 from 0.24 h-1 to 0.36, 0.49 and 0.57 h-1, respectively. The oxygen uptake rate (OUR) and 15-min acute bio-toxicity demonstrated that the bio-toxicity of IWW was reduced and the activity of biomass was enhanced in the ZVI@GACs/AS system. In MBR, ZVI@GACs at packing volume of 10% enhanced COD and PHENs removal by 14% and 22%, respectively. Membrane fouling cycle was prolonged by 71%. The accumulations of EPS-proteins, EPS-polysaccharides, SMP-proteins and SMP-polysaccharides were reduced by 6%, 67%, 27% and 60%, respectively. Fourier transform infrared spectroscopy (FTIR) confirmed the oxidation of SMP-polysaccharides in ZVI@GACs-MBR. The iron ions released from ZVI@GACs showed inhibition on the secretion of SMP-/EPS-proteins. Floc particle size distribution (PSD) and X-ray diffraction (XRD) spectrum confirmed that the coagulation effects of Fe(OH)3 and FeOOH triggered by Fe3+ increased the sludge floc size and contributed to membrane fouling mitigation. Genus Enterococcus was enriched in MBR with the destruction of PHENs by the ZVI@GACs-initiated radical generation process. The findings of this study confirmed successful development and adoption of ZVI@GACs into MBR for bio-refractory IWW treatment. It also provided an in-depth understanding on the mechanisms of ZVI@GACs-MBR system.

The suitability of titanium salts in coagulation removal of micropollutants and in alleviation of membrane fouling

Coagulation is a conventional method in water treatment. In recent decades, with the rapid development of membrane filtration, the use of coagulation is facing some new challenges. How to minimize the membrane fouling became a leading-edge topic in the study of coagulation. Here, the performances of three types of titanium coagulants were evaluated in terms of both the coagulation removal of toxic micropollutants and the alleviation of membrane fouling. Three oxysalts and two antibiotics were taken as representatives of inorganic and organic micropollutants. As compared with titanium tetrachloride (TiCl₄) and polytitanium chloride (PTC), titanium xerogel (TXC) with a higher polymerization degree showed much better performances in direct coagulation removal of oxysalts and antibiotics and in pre-coagulation for mitigating membrane fouling in both coagulation-sedimentation-ultrafiltration (CSUF) and in-line coagulation-ultrafiltration (CUF) processes. In the CSUF system, the membrane permeate flux with TXC pre-coagulation (89.5%) was much higher than those of TiCl₄ (56.1%) and PTC (57.4%). After a 5 day continuous operation, the transmembrane pressure in the CUF system with TXC coagulation was increased only to 4.9 kPa, while those of PTC and TiCl₄ were 12.2 and 18.5 kPa, respectively. The results here demonstrate that TXC is a promising coagulant for pollutant removal and membrane fouling alleviation, due to the following merits: better floc properties, weaker pH-dependence, and higher resistance to coordination with organic pollutants. The observation shed new lights on the fabrication and application of coagulants in a wide variety of scenarios.

Data-Driven Intelligent Warning Method for Membrane Fouling

Membrane fouling has become a serious issue in membrane bioreactor (MBR) and may destroy the operation of the wastewater treatment process (WWTP). The goal of this article is to design a data-driven intelligent warning method for warning the future events of membrane fouling in MBR. The main novelties of the proposed method are threefold. First, a soft-computing model, based on the recurrent fuzzy neural network (RFNN), was proposed to identify the real-time values of membrane permeability. Second, a multistep prediction strategy was designed to predict the multiple outputs of membrane permeability accurately by decreasing the error accumulation over the predictive horizon. Third, a warning detection algorithm, using the state comprehensive evaluation (SCE) method, was developed to evaluate the pollution levels of MBR. Finally, the proposed method was inserted into a warning system to complete the predicting and warning missions and further tested in the real plants to evaluate its efficiency and effectiveness. Experimental results have verified the benefits of the proposed method.

Comparative overview of advanced oxidation processes and biological approaches for the removal pharmaceuticals

Nowadays, pharmaceuticals are the center of significant environmental research due to their complex and highly stable bioactivity, increasing concentration in the water streams and high persistence in aquatic environments. Conventional wastewater treatment techniques are generally inadequate to remove these pollutants. Aiming to tackle this issue effectively, various methods have been developed and investigated on the light of chemical, physical and biological procedures. Increasing attention has recently been paid to the advanced oxidation processes (AOPs) as efficient methods for the complete mineralization of pharmaceuticals. Their high operating costs compared to other processes, however, remain a challenge. Hence, this review summarizes the current and state of art related to AOPs, biological treatment and their effective exploitation for the degradation of various pharmaceuticals and other emerging molecules present in wastewater. The review covers the last decade with a particular focus on the previous five years. It is further envisioned that this review of advanced oxidation methods and biological treatments, discussed herein, will help readers to better understand the mechanisms and limitations of these methods for the removal of pharmaceuticals from the environment. In addition, we compared AOPs and biological treatments for the disposal of pharmaceuticals from the point of view of cost, effectiveness, and popularity of their use. The exploitation of coupling AOPs and biological procedures for the degradation of pharmaceuticals in wastewater was also presented. It is worthy of note that an integrated AOPs/biological system is essential to reach the complete degradation of pharmaceuticals; other advantages of this hybrid technique involve low energy cost, an efficient degradation process and generation of non-toxic by-products.

Determination of pharmaceuticals in solid samples in municipal wastewater treatment plants by online SPE LC-MS/MS using QuEChERS extraction

In this study, a pretreatment method based on the QuEChERS method has been applied for simultaneously extracting 27 residual pharmaceuticals from wastewater solids. The extracted compounds have been analyzed using online solid-phase extraction (SPE) coupled to liquid chromatography with tandem mass spectrometry (LC-MS/MS). A recovery test was conducted according to the absorbent type, and buffers were added in the sample extraction step. The highest recovery efficiency could be observed when Na₂SO₄ was used as an absorbent and Na₂EDTA was injected during the extraction process; the recovery efficiencies of the proposed method for the target compounds ranged from 61.3 to 137.2%, and the repeatability was 6.8%. These recovery and repeatability data showed that the proposed method could reliably analyze the 27 target residual pharmaceuticals. The concentrations of the target compounds were all below the limits of quantification: 830 ng g^-1 for the target compounds in suspended solids, 2353 ng g^-1 in activated sludge, and 1929 ng g^-1 in waste sludge. The analytical method established in this study can be applied to quantify residual pharmaceuticals in solid samples and to investigate their behaviors in a municipal wastewater treatment plant.

Recent Advances in the Rejection of Endocrine-Disrupting Compounds from Water Using Membrane and Membrane Bioreactor Technologies: A Review

Water is a critical resource necessary for life to be sustained, and its availability should be secured, appropriated, and easily obtainable. The continual detection of endocrine-disrupting chemicals (EDCs) (ng/L or µg/L) in water and wastewater has attracted critical concerns among the regulatory authorities and general public, due to its associated public health, ecological risks, and a threat to global water quality. Presently, there is a lack of stringent discharge standards regulating the emerging multiclass contaminants to obviate its possible undesirable impacts. The conventional treatment processes have reportedly ineffectual in eliminating the persistent EDCs pollutants, necessitating the researchers to develop alternative treatment methods. Occurrences of the EDCs and the attributed effects on humans and the environment are adequately reviewed. It indicated that comprehensive information on the recent advances in the rejection of EDCs via a novel membrane and membrane bioreactor (MBR) treatment techniques are still lacking. This paper critically studies and reports on recent advances in the membrane and MBR treatment methods for removing EDCs, fouling challenges, and its mitigation strategies. The removal mechanisms and the operating factors influencing the EDCs remediation were also examined. Membranes and MBR approaches have proven successful and viable to eliminate various EDCs contaminants.

Optimization of the adsorption of diclofenac by activated carbon and the acidic regeneration of spent activated carbon

Diclofenac sodium (DCF) is a non-steroidal anti-inflammatory drug. It has been classified as ecotoxic even at low concentrations. In this study, adsorption of DCF on coconut shell-based granular activated carbon (GAC) and regeneration of spent GAC with hydrochloric acid (HCl) were investigated. The results showed that GAC with heterogeneous surface structure adsorbs DCF endothermically with both chemical and physical forces. Adsorption and regeneration processes were optimized with Taguchi Experimental Design. The effects of all parameters affecting the adsorption and regeneration processes were determined by analysis of variance and Pareto analyses. DCF removal of 79.80% was obtained at optimum conditions and the most effective parameter was evaluated as GAC size. At optimum regeneration conditions, 6.85 mg DCF/g GAC adsorption capacity was found with an operating cost of €0.05 g GAC. The amount of HCl was the most effective parameter. It was determined that the regenerated GAC had an adsorptive capacity higher than the adsorptive capacity of the raw GAC during at least three regeneration cycles. Raw, spent and regenerated GACs were characterized by Fourier transform infrared spectrometry and scanning electron microscopy analysis.

Enhanced removal of copper by electroflocculation and electroreduction in a novel bioelectrochemical system assisted microelectrolysis

The idea is immensely attractive if copper ions can be completely removed in wastewater. In this study, a novel bioelectrochemical system assisted microelectrolysis was developed for the enhanced removal of copper. One abandoned aluminium was used as anode and graphite/activated carbon as biological anode, and a bifunctional catalytic conductive membrane as cathode. Under the combined action of electroreduction and electroflocculation, copper ions directly pumped into the cathode chamber were efficiently treated, and organic matter was synchronously removed (Copper ions >99.9%, TOC >98.2%, COD >97.9%, NH₄⁺-N >94.5% and TP >94.9%). The reactions of primary batteries and microelectrolysis in anode chamber significantly enhanced the self-production capacity of BES (maximum power density of 2250 mW m^-3 at current density 10.65 mA m^-2, maximum cell voltage of 1.4 V). The results confirmed the application potential of bioelectrochemical system assisted microelectrolysis for the removal of copper.

Distribution and Removal of Pharmaceuticals in Liquid and Solid Phases in the Unit Processes of Sewage Treatment Plants

In this study, we analyzed 27 pharmaceuticals in liquid and solid phase samples collected from the unit processes of four different sewage treatment plants (STPs) to evaluate their distribution and behavior of the pharmaceuticals. The examination of the relative distributions of various categories of pharmaceuticals in the influent showed that non-steroidal anti-inflammatory drugs (NSAIDs) were the most dominant. While the relative distribution of antibiotics in the influent was not high (i.e., 3%–5%), it increased to 14%–30% in the effluent. In the four STPs, the mass load of the target pharmaceuticals was reduced by 88%–95% mainly in the biological treatment process, whereas the ratio of pharmaceuticals in waste sludge to those in the influent (w/w) was only 2%. In all the STPs, the removal efficiencies for the stimulant caffeine, NSAIDs (acetaminophen, naproxen, and acetylsalicylic acid), and the antibiotic cefradine were high; they were removed mainly by biological processes. Certain compounds, such as the NSAID ketoprofen, contrast agent iopromide, lipid regulator gemfibrozil, and antibiotic sulfamethoxazole, showed varying removal efficiencies depending on the contribution of biodegradation and sludge sorption. In addition, a quantitative meta-analysis was performed to compare the pharmaceutical removal efficiencies of the biological treatment processes in the four STPs, which were a membrane bioreactor (MBR) process, sequencing batch reactor (SBR) process, anaerobic–anoxic–oxic (A2O) process, and moving-bed biofilm reactor (MBBR) process. Among the biological processes, the removal efficiency was in the order of MBR > SBR > A2O > MBBR. Among the tertiary treatment processes investigated, powdered activated carbon showed the highest removal efficiency of 18%–63% for gemfibrozil, ibuprofen, ketoprofen, atenolol, cimetidine, and trimethoprim.

Effect of ferric hydroxide on membrane fouling in membrane bioreactor treating pharmaceutical wastewater

Membrane fouling is considered as a main drawback for MBR technology especially treating industrial wastewater. Therefore, this study aimed to investigate the effect of fouling in membrane bioreactor (MBR) treating pharmaceutical wastewater with the addition of ferric hydroxide. Two identical lab-scale MBRs, namely, a control MBR (Co-MBR) and an enhanced MBR dosed with ferric hydroxide (Fe-MBR), were operated in parallel. The results demonstrate membrane fouling was retarded by 35% with the addition of iron. Further exploration of membrane fouling mechanisms showed iron addition resulted in increase in biomass floc size, enhancement of bacteria activity and reduction of dissolved organic concentration, especially carbohydrate, biopolymer and low molecular weight compounds concentrations in mixed liquor. There was also lower abundance of bacterial associated with biofilm formation in the Fe-MBR compared with the Co-MBR. These findings collectively contributed to the positive impacts on membrane fouling mitigation.

Fate of environmental pollutants

This annual review covers the literature published in 2018 on topics related to the occurrence and fate of environmental pollutants in wastewater. Due to the vast amount of literature published on this topic, we have discussed only a portion of the quality research publications, due to the limitation of space. The abstract search was carried out using Web of Science, and the abstracts were selected based on their relevance. In a few cases, full-text articles were referred to understand new findings better. This review is divided into the following sections: antibiotic-resistant bacteria (ARBs) and antibiotic-resistant genes (ARGs), disinfection by-products (DBPs), drugs of abuse (DoAs), estrogens, heavy metals, microplastics, per- and polyfluoroalkyl compounds (PFAS), pesticides, and pharmaceuticals and personal care products (PPCPs), with the addition of two new classes of pollutants to previous years (DoAs and PFAS).

Emerging pollutants-Part II: Treatment

Recently, emerging pollutants (EPs) have been frequently detected in urban wastewater, surface water, drinking water, and other water bodies. EPs mainly usually include pharmaceuticals and personal care products, endocrine-disrupting chemicals, antibiotic resistance genes, persistent organic pollutants, disinfection by-products, and other industrial chemicals. The potential threat of EPs to ecosystems and human health has attracted worldwide attention. Therefore, how to treat EPs in various water bodies has become one of the research priorities. In this paper, some research results on treatment of EPs published in 2018 were summarized. PRACTITIONER POINTS: At present, more attention has been paid to emerging pollutants (EPs), including pharmaceuticals and personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), antibiotic resistance genes, persistent organic pollutants, disinfection by-products, etc. Existing EPs disposal technologies mainly include: engineered wetlands and natural systems, biological treatment, physical and physicochemical separation, chemical oxidation, catalysis, etc. This paper reviews some research results on the treatment technologies of EPs published in 2018.

Bacterial communities, metabolic functions and resistance genes to antibiotics and metals in two saline seafood wastewater treatment systems

This study investigated the bacterial communities, metabolic functions, antibiotic resistance genes (ARGs) and metal resistance genes (MRGs) in two alternating anaerobic/aerobic biological filters (A/O-BFs) treating saline seafood wastewater (SSW). Firmicutes was the most abundant phylum in both systems, and halophilic and alkaliphilic bacteria were largely enriched. 15 potential pathogens were obtained. Metabolism was the predominant bacterial function. 49 ARGs and 7 MRGs were detected, and the total abundance of ARGs increased while that of MRGs decreased. Clear shifts in bacterial structure and function, ARGs and MRGs were observed in both systems and at different heights. Co-occurrence of ARGs and MRGs and their hosts were identified. ARGs and MRGs mainly negatively correlated with bacterial functions, which were also the important contributors to shifts in bacterial communities and functions. This study highlights the importance of investigating ARGs and MRGs in SSW treatment systems and their complex interactions with bacterial communities and functions.

Treatment of tea industry wastewater using coagulation-spinning basket membrane ultrafiltration hybrid system

The present study delivers the significant effects of the coagulation-spinning basket membrane ultrafiltration on the treatment of tea industry generated effluent. Response surface methodology (RSM) was applied to optimize the process parameters, namely, alum dosage (50-300 mg L^-1), pH (4-10), stirring speed (10.47-62.83 rad s^-1), and stirring time (30-180 min) during the pretreatment of effluent. Prior to final treatment, the spinning basket membrane filtration was performed to explore the permeate flux decline behavior at different parametric conditions such as, applied transmembrane pressure drop (TMP drop: 207-414 kPa), rotational speed (10.47, 31.41, 52.36 and 73.30 rad s^-1) and membrane MWCOs (5-50 kDa). Artificial neural network (ANN) analysis helps to compare the theoretical flux decline behavior with the experimental data. Modified Hermia's models were used to identify the reversible and irreversible fouling as well as cake layer formation. The decrease of cake filtration model constant from 1.31 × 10⁷ to 0.56 × 10⁷ m^-2 s indicates the minimization of concentration polarization by virtue of membrane basket rotational speed. The effects of various parameters on the permeate quality have also been verified. The maximum improvement of permeate clarity of 94.46% was observed when the membrane basket rotation was 52.36 rad s^-1. With changing MWCO of 50 to 5 kDa, the removal of chemical oxygen demand has been increased from 87% to 96.70% at a rotation of 52.36 rad s^-1.

Fe(II)-dosed ceramic membrane bioreactor for wastewater treatment: Nutrient removal, microbial community and membrane fouling analysis

Ferrous dosing is used to reduce phosphorus concentration and alleviate polymeric membrane fouling in membrane bioreactor (MBR). However, limited studies have been conducted to investigate the impacts of ferrous dosing on ceramic membrane fouling, nutrient removal efficiency and microbial community. Accordingly, the aim of this study was to investigate the effect of intermittent ferrous dosing with Fe/P molar ratios of 2 and 1 (with a dosing frequency of every two days) on the overall nutrient removal, functional microbial changes and membrane fouling in ceramic membrane bioreactors (CMBR) in treatment of wastewater. TP concentration of 10 mg/L in influent decreased to 1.94 ± 0.62 mg/L (control), 0.38 ± 0.22 mg/L (Fe/P = 1) and 0.31 ± 0.18 mg/L (Fe/P = 2) in the effluent, respectively. Meanwhile, the effluent total nitrogen (TN) concentrations with Fe/P = 1 treatment (6.80 ± 2.02 mg/L) and Fe/P = 2 treatment (5.12 ± 2.28 mg/L) were lower than that of the control (7.72 ± 2.36 mg/L). Compared to Fe/P = 1, the TN removal performance was better for Fe/P = 2 mainly due to the increased abundance of denitrifying bacteria (Zoogloea and Acinetobacter). In addition, excess iron dose might have toxic effects on bacterial physiology, however the Fe concentrations that cause cell damage vary for different bacteria. The relative abundance of Zoogloea (aerobic denitrifying bacteria) continuously increased with ferrous addition (Fe/P = 2), while other bacteria including Dechloromonas, Hyphomicrobium and Thauera (anoxic denitrifying bacteria), Nitrospira (nitrifying bacteria) and Candidatus Accumulibacter (phosphorus accumulating organism) decreased sharply. Furthermore, membrane fouling was effectively moderated by ferrous dosing and Fe/P = 1 treatment showed improved membrane fouling mitigation than Fe/P = 2. Overall, intermittent ferrous addition in CMBR with Fe/P molar ratio of 1 was beneficial to the removal of nutrients (TP, TN and organics), enhanced succession of microbial community and membrane fouling mitigation.

Membrane-based separation of potential emerging pollutants

The potential emerging pollutants (PEPs) such as hazardous chemicals, toxic metals, bio-wastes, etc., pose a severe threat to human health, hygiene and ecology by way of polluting the environment and water sources. The PEPs are originated from various industrial effluent discharges including pharmaceutical, food and metal processing industries. These PEPs in contact with water may pollute the water and disturb the aquatic life. Innumerable methods have been used for the treatment of effluents and separating the toxic chemicals/metals. Of these methods, membrane-based separation processes (MBSPs) are effective over the conventional techniques for providing clean water from wastewater streams at an affordable cost with minimum energy requirement. Microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), reverse osmosis (RO), and forward osmosis (FO) methods as well as hybrid technologies are discussed citing the published results of the past decade.

Fate of pharmaceuticals during membrane bioreactor treatment: Status and perspectives

Pharmaceuticals in surface waters and wastewater treatment plants (WWTPs) as emerging pollutants have become a major concern. In comparison with other wastewater treatments, removal of pharmaceuticals in MBR has received much attention. This review presents the source and occurrence of pharmaceuticals in WWTPs influents. Experimental studies related to the removal of pharmaceuticals during MBR treatment, key affecting factors (including the different stages of MBR process configuration and the process parameters), and the underlying mechanisms proposed to explain the biodegradation and adsorption behaviors, have been comprehensively discussed. Several transformation products of pharmaceuticals are also reviewed in this paper. Furthermore, further research is needed to gain more information about the multiple influence factors of the pharmaceuticals elimination, appropriate methods for promoting pharmaceuticals elimination, more essential removal pathways, effect of pharmaceuticals on membrane fouling, and the detection and analysis of transformation products.