Co-Mn layered double hydroxide as an effective heterogeneous catalyst for degradation of organic dyes by activation of peroxymonosulfate

Unveiling the fate of metal leaching in bimetal-catalyzed Fenton-like systems: pivotal role of aqueous matrices and machine learning prediction

Metal-based catalytic materials exhibit exceptional properties in degrading emerging pollutants within Fenton-like systems. However, the potential risk of metal leaching has become pressing environmental concern. This study addressed scientific issues pertaining to the leaching behavior and control strategies for metal-based catalytic materials. Innovative cobalt-aluminum hydrotalcite (CoAl-LDH) triggered peroxymonosulfate (PMS) activation system was constructed and achieved near-complete removal of Ciprofloxacin (CIP) across diverse water quality environments. Notably, it was found that the tunable ion exchange and Al3+ stabilization of CoAl-LDH occurred due to the particularity of neutral water quality, resulting in significantly lower Co2+ leaching levels (0.321 mg/L) compared to acidic conditions (5.103 mg/L). In light of this, machine learning technology was then employed for the first time to simulate the dynamic trend of Co2+ leaching and elucidated the critical regulatory roles and mechanisms of Al3+, aqueous matrix, and reaction rate. Furthermore, degradation systems based on different water quality and metal leaching levels regulated the generation levels of SO4.- and O2∙-, and the unique advantages of free radical attack paths were clarified through CIP degradation products and ecotoxicity analysis. These findings introduced novel insights and approaches for engineering application and pollution control in metal-based Fenton-like water treatment.

Photocatalytically active layered double hydroxide-PVDF composite membranes for effective remediation of dyes contaminated water

In this work, polyvinylidene fluoride (PVDF) intercalated CuFe layered double hydroxides (LDH) membranes were fabricated and investigated for UV-LED/persulfate degradation of methylene blue (MB), crystal violet (CV), methyl orange (MO), and Eriochrome black T (EBT) dyes from water. The PVDF-CuFe membrane exhibited improved heterogeneity, surface functionality (CuO, Fe-O, Cu-O-Fe), surface roughness, and hydrophilicity. The process parameters were optimized by response surface methodology, and maximum MB removal (100%) was achieved within 45.22-178.5 min at MB concentration (29.45-101.93 mg/L), PP concentration (0.5-2.41 g/L) and catalyst dosage (1.84-1.95 g/L). The degradation kinetics was well described by a pseudo-first-order model (R2 = 0.982) and fast reaction rate (0.029-0.089/min). The MB dye degradation mechanism is associated with HO·/SO4•- reactive species generated by Fe3+/Fe2+ or Cu2+/Cu+ in PVDF-CuFe membrane and PP dissociation. The PVDF-CuFe membrane demonstrated excellent recyclability performance with a 12% reduction after five consecutive cycles. The catalytic membrane showed excellent photocatalytic degradation of crystal violet (100%), methyl orange (79%), and Eriochrome black T (60%). The results showed that UV-LED/persulfate-assisted PVDF-CuFe membranes can be used as a recyclable catalyst for the effective degradation of dye-contaminated water streams.

Reusable CS-Ca@PEI/CuMnO2 Hydrogel Beads for Peroxymonosulfate-Activated Degradation of Congo Red

Metal oxides can activate peroxymonosulfate (PMS) for the catalytic degradation of organic dyes. However, achieving high catalytic efficiency, structural stability, ease of recovery, and recyclability remains challenging for both research and practical applications. To address these requirements, a bimetallic oxide, CuMnO2, was synthesized using a simple hydrothermal approach and was encapsulated to create hydrogel beads, CS-Ca@PEI/CuMnO2. Subsequently, CS-Ca@PEI/CuMnO2 was used to activate PMS and establish a solid-liquid heterogeneous oxidation system (CS-Ca@PEI/CuMnO2/PMS) for the degradation of Congo red (CR). The effects of various parameters such as different systems, catalyst dosages, initial pH values, PMS concentrations, temperatures, and anion types on the catalytic degradation properties of CS-Ca@PEI/CuMnO2 for CR were systematically evaluated. The results indicated that CS-Ca@PEI/CuMnO2 has exceptional degradation capacity, achieving 91.0% degradation of CR at pH 7. After three degradation cycles, the catalyst maintained an 86.9% degradation efficiency compared to its original performance, highlighting its robust structural stability. The presence of reactive radicals, specifically 1O2 and •O2-, were confirmed through quenching experiments, X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance spectroscopy (EPR). Liquid chromatography-tandem mass spectrometry (LC-MS) revealed ten proposed intermediates in the catalytic degradation process. Due to its exceptional catalytic performance, structural durability, recyclability, and ease of retrieval, the catalyst shows great potential for effectively removing organic pollutants from industrial wastewater.

Mesoporous cobalt-manganese layered double hydroxides promote the activation of calcium sulfite for degradation and detoxification of metronidazole

Metronidazole (MNZ), a commonly used antibiotic, poses risks to water bodies and human health due to its potential carcinogenic, mutagenic, and genotoxic effects. In this study, mesoporous cobalt-manganese layered double hydroxides (CoxMny-LDH) with abundant oxygen vacancies (Ov) were successfully synthesized using the co-precipitation method and used to activate calcium sulfite (CaSO3) with slight soluble in water for MNZ degradation. The characterization results revealed that Co2Mn-LDH had higher specific areas and exhibited good crystallinity. Co2Mn-LDH/CaSO3 exhibited the best catalytic performance under optimal conditions, achieving a remarkable MNZ degradation efficiency of up to 98.1 % in only 8 min. Quenching experiments and electron paramagnetic resonance (EPR) tests showed that SO4•- and 1O2 played pivotal roles in the MNZ degradation process by activated CaSO3, while the redox cycles of Co2+/Co3+ and Mn3+/Mn4+ on the catalyst surface accelerated electron transfer, promoting radical generation. Three MNZ degradation routes were put forward based on the density functional theory (DFT) and liquid chromatography-mass spectrometer (LC-MS) analysis. Meanwhile, the toxicity analysis result demonstrated that the toxicity of intermediates post-catalytic reaction was decreased. Furthermore, the Co2Mn-LDH/CaSO3 system displayed excellent stability, reusability, and anti-interference capability, and achieved a comparably high removal efficiency across various organic pollutant water bodies. This study provides valuable insights into the development and optimization of effective heterogeneous catalysts for treating antibiotic-contaminated wastewater.

Ranitidine degradation in layered double hydroxide activated peroxymonosulfate system: impact of transition metal composition and reaction mechanisms

Ranitidine, a competitive inhibitor of histamine H2 receptors, has been identified as an emerging micropollutant in water and wastewater, raising concerns about its potential impact on the environment and human health. This study aims to address this issue by developing an effective removal strategy using two types of layered double hydroxide (LDH) catalysts (i.e., CoFeLDH and CoCuLDH). Characterization results show that CoFeLDH catalyst has superior catalytic properties due to its stronger chemical bond compared to CoCuLDH. The degradation experiment shows that 100% degradation of ranitidine could be achieved within 20 min using 25 mg/L of CoFeLDH and 20 mg/L of peroxymonosulfate (PMS). On the other hand, CoCuLDH was less effective, achieving only 70% degradation after 60 min at a similar dosage. The degradation rate constant of CoFeLDH was 10 times higher than the rate constant of CoCuLDH at different pH range. Positive zeta potential of CoFeLDH made it superior over CoCuLDH regarding catalytic oxidation of PMS. The catalytic degradation mechanism shows that sulfate radicals played a more dominant role than hydroxyl radicals in the case of LDH catalysts. Also, CoFeLDH demonstrated a stronger radical pathway than CoCuLDH. XPS analysis of CoFeLDH revealed the cation percentages at different phases and proved the claim of being reusable even after 8 cycles. Overall, the findings suggest that CoFeLDH/PMS system proves to be a suitable choice for attaining high degradation efficiency and good stability in the remediation of ranitidine in wastewater.

Role of tea polyphenols in enhancing the performance, sustainability, and catalytic cleaning capability of membrane separation for water-soluble pollutant removal

Tea polyphenols (TPs), like green tea polyphenol (GTP) and black tea polyphenol (BTP), with phenolic hydroxyl structures, form coordination and hydrogen bonds, making them effective for bridging inorganic catalysts and membranes. Here, TPs were employed as interface agents for the preparation of TPs-modified needle-clustered NiCo-layered double hydroxide/graphene oxide membranes (NiCo-LDH-TPs/GO). The incorporation of porous guest material, NiCo-LDH-TPs, facilitated water channel expansion, enhancing membrane permeability and resulting in the development of high-performance, sustainable catalytic cleaning membranes. The introduction of TPs through coordination weakened the surface electronegativity of NiCo-LDH, promoting a uniform mixed dispersion with GO and facilitating membrane self-assembly. NiCo-LDH-GTP/GO-5 and NiCo-LDH-BTP/GO-5 membranes demonstrated permeances of 85.98 and 90.76 L m-2 h-1 bar-1, respectively, with rejections of 98.73% and 99.54% for methylene blue (MB). Notably, the NiCo-LDH-BTP/GO-5 membrane maintained a high rejection of 97.11% even after 18 cycles in the catalytic cleaning process. Furthermore, the modification of GTP and BTP enhanced MB degradation through PMS activation, resulting in a 0.33% and 0.35% increase in the reaction rate constants of NiCo-LDH, respectively, while reducing metal ion spillover. These findings highlighted the potential of TPs in enhancing the efficiency and sustainability of catalytic cleaning GO membranes for water purification and separation processes.

Co2+-adsorbed chitosan-grafted-poly(acrylic acid) hydrogel as peroxymonosulfate activator for effective dye degradation

In this work, chitosan-grafted-poly(acrylic acid) (CS-g-PAA) was synthesized for use as a Co2+ adsorbent and circularly utilized as a peroxymonosulfate (PMS) activator in the degradation of rhodamine B (RhB) dye. CS-g-PAA demonstrated 3.7 times higher adsorption capacity toward Co2+ than pristine chitosan. The impact of the adsorption conditions was evaluated. The pseudo-second-order kinetic model and the Langmuir isotherm model best described the adsorption process. Under optimum conditions, the adsorption capacity of CS-g-PAA for Co2+ was 212 mg/g. The Co2+-adsorbed CS-g-PAA hydrogel was further utilized in the RhB degradation process. The effects of catalyst dosage, initial RhB concentration, pH, and the coexistence of anions on the degradation of RhB were studied. The hydrogel catalyst could remove 98 % of RhB within 5 min, at a degradation rate of 0.624 per min. Electron paramagnetic resonance (EPR) analysis and the radical scavenger experiment suggested that SO4•-, HO•, 1O2, and O2•- were involved in the degradation. Furthermore, when tested in various water systems, high degradation efficiencies of 98 % were attained after 20 min. The hydrogel catalyst performed excellent degradation over ten cycles without any chemical recovery processes. Moreover, high degradation efficiencies were observed between 95 % and 98 % when tested with other dyes.

Effective activation of peroxymonosulfate by CoCr-LDH for removing organic contaminants in water: from lab-scale to practical applications

In this study, CoCr layered double hydroxide material (CoCr-LDH) was prepared and used as an effective catalyst for peroxymonosulfate (PMS) activation to degrade organics in water. The prepared CoCr-LDH material had a crystalline structure and relatively porous structure, as determined by various surface analyses. In Rhodamine B (RhB) removal, the most outstanding PMS activation ability belongs to the material with a Co:Cr molar ratio of 2:1. The removal of RhB follows pseudo-first-order kinetics (R2 > 0.99) with an activation energy of 38.23 kJ/mol and efficiency of 98% after 7 min of treatment, and the total organic carbon of the solution reduced 47.2% after 10 min. The activation and oxidation mechanisms were proposed and the RhB degradation pathways were suggested with the key contribution of O2•- and 1O2. Notably, CoCr-LDH can activate PMS over a wide pH range of 4 - 9, and apply to a wide range of organic pollutants and aqueous environments. The material has high stability and good recovery, which can be reused for 5 cycles with a stable efficiency of above 88%, suggesting a high potential for practical recalcitrant water treatment via PMS activation by heterogeneous catalysts.

Enhanced ability of toluene oxidation by controlling inversion degree of spinel composed of only Co, Mn

Exploring the single relationship between the inversion degree of spinel and its catalytic performance is a great challenge, but has important significance for further structural design and application. A series of CoMn inverse spinels were prepared and the general formula [Formula: see text] was deduced through X-ray diffraction refinement to find a decreased inversion degree x as calcination temperature rose. Catalytic oxidation of toluene showed that higher inversion degree (S-300 with x ≈ 0.95) can reach larger conversion rate (90 % at about 250 °C for 400 ppm toluene) with greater reaction stability (140 h). Density Functional Theory (DFT) calculations on density of states indicated its metallic nature, and found that the strength of O-p and Transition metal-d orbitals at Fermi energy is positively correlated to the inversion degree, meaning stronger electron migration ability. Along with the adsorption calculation analysis that lattice oxygen species are proved to work dominantly (S-300 with lowest adsorption energy but highest performance), this work uncovered a theoretical insight into inverse spinel oxide, to provide the possibility of elevated oxidation ability through structural control.

Peroxymonosulfate activation by CuMn-LDH for the degradation of bisphenol A: Effect, mechanism, and pathway

The remediation of water contaminated with bisphenol A (BPA) has gained significant attention. In this study, a hydrothermal composite activator of Cu3Mn-LDH containing coexisting phases of cupric nitrate (Cu(NO3)2) and manganous nitrate (Mn(NO3)2) was synthesized. Advanced oxidation processes were employed as an effective approach for BPA degradation, utilizing Cu3Mn-LDH as the catalyst to activate peroxymonosulfate (PMS). The synthesis of the Cu3Mn-LDH material was characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM). According to the characterization data and screening experiments, Cu3Mn-LDH was selected as the best experimental material. Cu3Mn-LDH exhibits remarkable catalytic ability with PMS, demonstrating good degradation efficiency of BPA under neutral and alkaline conditions. With a PMS dosage of 0.25 g·L-1 and Cu3Mn-LDH dosage of 0.10 g·L-1, 10 mg·L-1 BPA (approximately 17.5 μM) can be completely degraded within 40 min, of which the TOC removal reached 95%. The reactive oxygen species present in the reaction system were analyzed by quenching experiments and EPR. Results showed that sulfate free radicals (SO4•-), hydroxyl free radicals (•OH), superoxide free radicals (•O2-), and nonfree radical mono-oxygen were generated, while mono-oxygen played a key role in degrading BPA. Cu3Mn-LDH exhibits excellent reproducibility, as it can still completely degrade BPA even after four consecutive cycles. The degradation intermediates of BPA were detected by GCMS, and the possible degradation pathways were reasonably predicted. This experiment proposes a nonradical degradation mechanism for BPA and analyzes the degradation pathways. It provides a new perspective for the treatment of organic pollutants in water.

Catalytic ozonation of bisphenol A by Cu/Mn@γ-Al2O3: Performance evaluation and mechanism insight

Herein, an alumina-based bimetallic catalyst (Cu1Mn7@γ-Al2O3) was synthesized for bisphenol A (BPA) degradation in the catalytic ozonation process. The catalytic ozonation system could degrade 93.9% of BPA within 30 min under the conditions of pH = 7.0, 10 mg L-1 O3 concentration, and 24 g L-1 catalyst dosage compared to ozone alone (21.0%). The enhanced BPA degradation efficiency was attributed to the abundant catalytic sites and synergistic effects of Cu and Mn. The results revealed that the synergistic interaction between Cu and Mn effectively accelerated the electron transfer process on the catalyst surface, thus promoting the generation of reactive oxygen species (ROS). Further studies indicated that the BPA degradation in Cu1Mn7@γ-Al2O3/O3 system predominantly followed the ·OH and O2·- oxidation pathway. Based on the density functional theory (DFT) calculations and intermediates detected by LC-MS analysis, two pathways for BPA degradation in the Cu1Mn7@γ-Al2O3/O3 system were proposed. The toxicity estimation illustrated that the toxicity of BPA and its byproducts was effectively reduced in the Cu1Mn7@γ-Al2O3/O3 system. This work provides a new protocol for O3 activation and pollutant elimination through a novel bimetallic catalyst during water purification.

A superior catalyst for ozone decomposition: NiFe layered double hydroxide

Ground-level ozone is harmful to human beings and ecosystems, while room-temperature catalytic decomposition is the most effective technology for ozone abatement. However, solving the deactivation of existing metal oxide catalysts was caused by oxygen-containing intermediates is challenging. Here, we successfully prepared a two-dimensional NiFe layered double hydroxide (NiFe-LDH) catalyst via a facile co-precipitation method, which exhibited stable and highly efficient performance of ozone decomposition under harsh operating conditions (high space velocity and humidity). The NiFe-LDH catalyst with Ni/Fe = 3 and crystallization time over 5 hr (named Ni3Fe-5) exhibited the best catalytic performance, which was well beyond that of most existing manganese-based oxide catalysts. Specifically, under relative humidity of 65% and space velocity of 840 L/(g·hr), Ni3Fe-5 showed ozone conversion of 89% and 76% for 40 ppmV of O3 within 6 and 168 hr at room-temperature, respectively. We demonstrated that the layered structure of NiFe-LDH played a decisive role in its outstanding catalytic performance in terms of both activity and water resistance. The LDH catalysts fundamentally avoids the deactivation caused by the occupancy of oxygen vacancies by oxygen-containing species (H2O, O-, and O2-) in manganese-based oxide. This study indicated the promising application potential of LDHs than manganese-based oxide catalysts in removal of gaseous ozone.

Efficient activation of peroxymonosulfate by CoMg2Mn-LDO for the degradation of orange Ⅱ: The important synergy of Mg

Advanced oxidation process (AOP) based on peroxymonosulfate (PMS) has aroused extensive discussion in the degradation of organic pollutants due to the strong oxidative ability of SO4•-. Great attention has been paid to developing transition metal catalysts for PMS activation. Still, few studies focused on the co-catalysis effect of non-redox metals. To study the co-catalysis of Mg and develop a more efficient metal catalyst, the CoMg2Mn-LDO was prepared by a co-precipitation method accompanied by calcination. The material showed an excellent ability for PMS activation. 97.1% of Orange Ⅱ was degraded within 15 min with the reaction rate constant (kobs) of 0.539 min-1 when pH equals 6.7, the dosages of CoMg2Mn-LDO and PMS were 90 mg L-1 and 100 mg L-1, respectively. By contrast, the value of kobs was 0.375 min-1 for the system of Co3Mn-LDO/PMS at the same experimental conditions. The electron paramagnetic resonance (EPR) and quenching experiments results proved the existence of O2•-, SO4•- and HO• in the CoMg2Mn-LDO/PMS system and the dominant role of SO4•- in Orange Ⅱ degradation. The synergistic effects among Co, Mn, and Mg were found to be responsible for the outstanding catalytic ability of CoMg2Mn-LDO. The presence of Mg could not only promote the formation of Mg-HSO5- and CoOH+ complexes but also reduce the leaching of Co and Mn, which accelerated the generation of free radicals and decreased secondary pollution risk. Based on the overall analysis, reasonable activation mechanisms of PMS and possible degradation pathways of Orange Ⅱ in this reaction system were proposed. This work proves that Mg could be applied as an effective co-catalytic element and provides new insight into developing transition metal catalysts for PMS-based AOPs.

Phytoremediative adsorption methodologies to decontaminate water from dyes and organic pollutants

Persistent organic pollutants and dyes cause major problems during ecofriendly wastewater treatment. To overcome this huge problem, several techniques have been considered and in practice for the safe disposal of organic pollutants in recent years; some of them are discussed and compared herein. This review focuses on new trends for wastewater treatment and compares them with certain other techniques alongside their pros and cons; adsorption is considered the safest among them. Adsorbents derived from agri-wastes have good capacity for the removal of these contaminants owing to their great sorption capacity, high reusability, easy operation, etc. Sometimes they need some modifications for the removal of dyes, which are also discussed in this review. This capacity of adsorbents to chelate dye molecules can be affected by factors, such as pH, the concentration of dyes and adsorbents, and temperature of the system. pH has direct influence on the ionization potential and charge on the outer surface of adsorbents. The findings on isotherms, kinetics, and desorption of plant waste-based biomaterials that are safe for the ecosystem and user friendly and are used for hazardous contaminant removal from water are summarized in this review. Finally, conclusions and future perspectives are presented, and some other materials, such as CNTs and MOFs, are also discussed as efficient adsorbents for eliminating dyes from wastewater. Finally, it is predicted that the adsorption of dyes is a more feasible solution for this dye pollution problem.

A co-precipitation route for the preparation of eco-friendly Cu-Al-layered double hydroxides with efficient tetracycline degradation

The construction of novel efficient catalysts for the treatment of organic pollutants in the aqueous environment is essential. The lamellar-like Cu-Al layered double hydroxides (CuAl-LDHs) with various mole ratios were synthesized by a simple route of co-precipitation, and the corresponding degradation characteristic was tested for the removal of tetracycline (TC) using PMS activation. The degradation efficiency of TC over CuAl-LDHs increased up to 93% within 10 min for the Cu/Al mole ratio of 3:1 and almost not changed at a higher mole ratio. For further calcining the optimal catalyst at 300 ℃, the degradation efficiency of TC was found to be increased to 96%. Sulfuric radicals and singlet oxygen were analyzed to be the main reason for the change in degradation characteristics, which was proved by radical quenching experiments and electron paramagnetic resonance technique. The parameters including PMS concentration, catalyst dosage, and reaction temperature on the TC degradation as well as the degradation mechanism for PMS activation were elaborated. The best proportion of CuAl-LDHs owned splendid stability and catalytic activity after reusing, which showed enormous potential in practical application.

Applications of Carbon-Based Materials in Activated Peroxymonosulfate for the Degradation of Organic Pollutants: A Review

In recent years, water pollution has posed a serious threat to aquatic organisms and humans. Advanced oxidation processes (AOPs) based on activated peroxymonosulfate (PMS) show high oxidation, good selectivity, wide pH range and no secondary pollution in the removal of organic pollutants in water. Carbon-based materials are emerging green catalysts that can effectively activate persulfates to generate radical and non-radical active species to degrade organic pollutants. Compared with transition metal catalysts, carbon-based materials are widely used in SR-AOPs because of their low cost, non-toxicity, acid and alkali resistance, large specific surface area, and scalable surface charge, which can be used for selective control of specific water pollutants. This paper mainly presents several carbon-based materials used to activate PMS, including raw carbon materials and modified carbon materials (heteroatom-doped and metal-doped), analyzes and summarizes the mechanism of activating PMS by carbon-based catalysts, and discusses the influencing factors (temperature, pH, PMS concentration, catalyst concentration, inorganic anions, inorganic cations and dissolved oxygen) in the activation process. Finally, the future challenges and prospects of carbon-based materials in water pollution control are also presented.

Magnetic hierarchical flower-like Fe3O4@ZIF-67/CuNiMn-LDH catalyst with enhanced redox cycle for Fenton-like degradation of Congo red: optimization and mechanism

A novel flower-like CuNiMn-LDH was synthesized and modified, to obtain a promising Fenton-like catalyst, Fe₃O₄@ZIF-67/CuNiMn-LDH, with a remarkable degradation of Congo red (CR) utilizing H₂O₂ oxidant. The structural and morphological characteristics of Fe₃O₄@ZIF-67/CuNiMn-LDH were analyzed via FTIR, XRD, XPS, SEM-EDX, and SEM spectroscopy. In addition, the magnetic property and the surface's charge were defined via VSM and ZP analysis, respectively. Fenton-like experiments were implemented to investigate the aptness conditions for the Fenton-like degradation of CR; pH medium, catalyst dosage, H₂O₂ concentration, temperature, and the initial concentration of CR. The catalyst exhibited supreme degradation performance for CR to reach 90.9% within 30 min at pH 5 and 25 °C. Moreover, the Fe₃O₄@ZIF-67/CuNiMn-LDH/H₂O₂ system revealed considerable activity when tested for different dyes since the degradation efficiencies of CV, MG, MB, MR, MO, and CR were 65.86, 70.76, 72.56, 75.54, 85.99, and 90.9%, respectively. Furthermore, the kinetic study elucidated that the CR degradation by the Fe₃O₄@ZIF-67/CuNiMn-LDH/H₂O₂ system obeyed pseudo-first-order kinetic model. More importantly, the concrete results deduced the synergistic effect between the catalyst components, producing a continuous redox cycle consisting of five active metal species. Eventually, the quenching test and the mechanism study proposed the predominance of the radical mechanism pathway on the Fenton-like degradation of CR by the Fe₃O₄@ZIF-67/CuNiMn-LDH/H₂O₂ system.

The important role of the interaction between manganese minerals and metals in environmental remediation: a review

With illegal discharge of wastewater containing inorganic and organic pollutants, combined pollution is common and needs urgent attention. Understanding the migration and transformation laws of pollutants in the environment has important guiding significance for environmental remediation. Due to the characteristics of adsorption, oxidation, and catalysis, manganese minerals play important role in the environment fate of pollutants. This review summarizes the forms of interaction between manganese minerals and metals, the environmental importance of the interaction between manganese minerals and metals, and the contribution of this interaction in improving performance of Mn-based composite for environmental remediation. The literatures have indicated that the interactions between manganese minerals and metals involve in surface adsorption, lattice replacement, and formation of association minerals. The interaction between manganese minerals and metals plays an important role in environmental behavior of element and environmental significance of manganese minerals. The synergistic or antagonistic effect resulted from the interaction influence the purification of heavy metal and organism pollutant. The synergistic effect benefited from the coordination of adsorption and oxidation, convenient electron transfer, abundant oxygen vacancies, and fast migration of lattice oxygen. Based on the synergy, Mn-based composites have been widely used for environmental remediation. The synthesize methods of Mn-based composites mainly include homogeneous coprecipitation, chemical etching route, hydrothermal, homogeneous chelating sol-gel, and ethylene glycol reduction strategy. This review is helpful to fully understand the migration and transformation process of pollutants in the environment, expand the resource utilization of manganese minerals for environmental remediation.

Pretreatment of membrane dye wastewater by CoFe-LDH-activated peroxymonosulfate: Performance, degradation pathway, and mechanism

When a membrane is used to treat dye wastewater, dye molecules are continually concentrated at the membrane surface over time, resulting in a dramatic decrease in membrane flux. Aside from routine membrane cleaning, the pretreatment of dye wastewater to degrade organic pollutants into tiny molecules is a facile solution to the problem. In this study, the use of layered double hydroxide (LDH) to activate peroxymonosulfate (PMS) for efficient degradation of organic pollutant has been thoroughly investigated. We utilized a simple two-drop co-precipitation process to prepare CoFe-LDH. The transition metal components in CoFe-LDH effectively activate PMS to create oxidative free radicals, and the layered structure of LDH increases the number of active sites, and thereby considerably enhancing the reaction rate. It was found that the reaction process produced non-free and free radicals, including singlet oxygen (¹O₂), sulfate radicals (SO₄^•-), and hydroxyl radicals (•OH), with ¹O₂ being the dominant reactive species. Under the optimal conditions (pH 6.7, PMS dosage 0.2 g/L, catalyst loading 0.1 g/L), the degradation of Acid Red 27 dye in the CoFe-LDH/PMS system reached 96.7% within 15 min at an initial concentration of 200 mg/L. The CoFe-LDH/PMS system also exhibited strong resistance to inorganic ions and pH during the degradation of organic pollutants. This study presents a novel strategy for the synergistic treatment of dye wastewater with free and non-free radicals produced by LDH-activated PMS in a natural environment.

Layered double hydroxide/carbonitride heterostructure with potent combination for highly efficient peroxymonosulfate activation

Iron-based layered double hydroxides (LDHs) have drawn tremendous attention as a promising peroxymonosulfate (PMS) activators, but they still suffer from low efficiencies limited by electrostatic agglomeration and low electronic conductivity. Herein, a MgFeAl layered double hydroxide/carbonitride (LDH/CN) heterostructure was constructed via triggering the interlayer reaction of citric acid (CA) and urea. CA as a structure-directing agent regulated the interlayer anion of MgFeAl-LDH, which enabled an interfacial tuning in the process of coupling with CN. The obtained LDH/CN heterostructure, as an efficient PMS activator, achieved nearly 100% bisphenol A (BPA) removal rate in 10 min with high specific activity (0.146 L min^-1·m^-2). Electron paramagnetic resonance (EPR) tests, quenching experiments, electrochemical characterization and X-ray photoelectrons spectroscopy (XPS) tests were applied to clarify the mechanism of BPA degradation. The results unraveled that the activity of the catalyst originated from the heterostructure of LDH and CN with an efficient interfacial electron transfer, which promoted the fast generation of O₂^•- for rapid pollutant degradation. In addition, the catalyst exhibited excellent applicability in realistic wastewater. This work offered a rational strategy for forming a heterostructure catalyst with a fine interface engineering in actual environmental cleanup.

Orange G degradation by heterogeneous peroxymonosulfate activation based on magnetic MnFe2O4/α-MnO2 hybrid

Wastewater containing an azo dye Orange G (OG) causes massive environmental pollution, thus it is critical to develop a highly effective, environmental-friendly, and reusable catalyst in peroxymonosulfate (PMS) activation for OG degradation. In this work, we successfully applied a magnetic MnFe₂O₄/α-MnO₂ hybrid fabricated by a simple hydrothermal method for OG removal in water. The characteristics of the hybrid were investigated by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller method, vibrating sample magnetometry, electron paramagnetic resonance, thermogravimetric analysis, and X-ray photoelectron spectroscopy. The effects of operational parameters (i.e., catalytic system, catalytic dose, solution pH, and temperature) were investigated. The results exhibited that 96.8% of OG degradation was obtained with MnFe₂O₄/α-MnO₂(1:9)/PMS system in 30 min regardless of solution pH changes. Furthermore, the possible reaction mechanism of the coupling system was proposed, and the degradation intermediates of OG were identified by mass spectroscopy. The radical quenching experiments and EPR tests demonstrated that SO₄^•̶, O₂^•̶, and ¹O₂ were the primary reactive oxygen species responsible for the OG degradation. The hybrid also displayed unusual stability with less than 30% loss in the OG removal after four sequential cycles. Overall, magnetic MnFe₂O₄/α-MnO₂ hybrid could be used as a high potential activator of PMS to remove orange G and maybe other dyes from wastewater.

Mechanistic insights into efficient peroxymonosulfate activation by NiCo layered double hydroxides

The efficient removal of organic refractory pollutants such as dyes and antibiotics in wastewater is crucial for protecting the environment and human health. In this work, a NiCo-layered double hydroxide (NiCo-LDH) with a uniform microspherical, hierarchical structure and a high surface area was successfully synthesized as an effective peroxymonosulfate (PMS) activator for the degradation of various organic dyes and antibiotics. The influence of various parameters on the catalytic activity of the NiCo-LDH was determined. Radical scavenger studies unveiled the major reactive oxygen species (ROSs) generated in the NiCo-LDH/PSM system to be ¹O₂, SO₄^•-, and O₂^•-. Ex-situ X-ray photoelectron spectroscopy (XPS) analysis uncovered the role of Co sites and oxygen vacancy as active sites and revealed the reversible redox properties of NiCo-LDH based on Co²⁺/Co³⁺ cycles. The activation mechanism and Rhodamine B (RhB) degradation pathways were experimentally studied and proposed. The NiCo-LDH is highly versatile, reusable and stable as shown by post-catalysis characterizations. This work shows the excellent catalysis performances and provides insights into the activation mechanism of PMS by NiCo-LDH for organic pollutant remediation.

A persulfate oxidation system for removing acid orange from aqueous solution: Evaluation and degradation mechanism

Peroxymonosulfate-based advanced oxidation (PMS-AOP) is a promising technology for the degradation of environmental pollutants. PMS can be activated by various transition metals, especially cobalt-based catalysts, but pure cobalt catalyst suffers from severe metal leakage and poor cyclicality. This study synthesized NiCo₂O₄ using a co-precipitation hydrothermal method. The structures, morphologies, and chemical states of the prepared catalysts were hexagonal sheet structures. The activation of PMS by catalyst (NiCo₂O₄) is investigated in a PMS/carbonate (PC) system for Orange II degradation. The observed pseudo-first-order rate constants (k₁) were assessed by the effects of different water matrices and operation conditions. The results show that k_obs with NiCo₂O₄ were increased by 13 times than that of treatment without NiCo₂O₄. This was mainly due to Co³⁺ and Ni³⁺ act as electron acceptors to capture electrons from the PMS/PC system, forming a good redox cycle with HSO₅^-/SO₅^- and oxidizing Co²⁺/Ni²⁺ to produce a large amount of more active components (e.g., ¹O₂ and SO₄^⋅-). The good reusability and high stability of NiCo₂O₄ were demonstrated by five recycle tests. These results suggest that the NiCo₂O₄/PC system is an efficient and stable method of pollution remediation.

Electronic structure modulation of multi-walled carbon nanotubes using azo dye for inducing non-radical reaction: Effect of graphitic nitrogen and structural defect

Multiwalled carbon nanotube (MWCNT) have a great potential for advanced oxidation process as a metal free catalyst. However, there catalytic activity is very low and needs to be appropriately tuned. Herein, we demonstrate a novel synthesis method for tuning the defect and surface functionality of MWCNT using azo dyes and the catalytic performance was tested for the degradation of different organic contaminates using PMS as an oxidant. The content, type of heteroatom functional groups, and the defect parameters were optimized by varying the pH and concentration of the organic dye. The quenching effect showed that singlet oxygen (¹O₂) is the primary reactive species generated by graphitic nitrogen, which can be boosted by the degree of graphitic structure disruption in MWCNT. The Linear sweep voltammetry (LSV) also confirmed that extrinsic doping enhanced the non-radical degradation by increasing the direct charge transfer rate from MB to PMS. Moreover, the designed catalyst showed a fast degradation performance with 35.1 kJ/mol activation energy and achieved the highest dye degradation rate and even surpassed some state-of-the-art metal-based and metal-free catalysts. The effect of inorganic anions study has also confirmed its industrial applicability.

Degradation of tetracycline antibiotic utilizing light driven-activated oxone in the presence of g-C3N4/ZnFe LDH binary heterojunction nanocomposite

In the present study, a binary heterojunction nanocomposite composed of graphitic carbon nitride (g-C₃N₄) and Zn/Fe-contained layered double hydroxide (ZnFe LDH) was employed as heterogeneous catalyst for the decomposition of tetracycline (TC) antibiotic utilizing Oxone and UV light irradiation. The sole use of g-C₃N₄/ZnFe LDH as adsorbent led to the negligible elimination of TC. In addition, the sole use of Oxone or UV (photolysis) and even their combination were not effective enough to degrade the target pollutant, while the combined process of g-C₃N₄/ZnFe LDH/Oxone/photolysis revealed significantly enhanced (synergistic) degradation of TC (92.4% within 30 min). Indirect detection tests for the identification of free radical species indicated the major role of both hydroxyl (^•OH) and sulfate (SO₄^•-) radicals in the degradation of TC by the g-C₃N₄/ZnFe LDH/Oxone/photolysis system. The elimination of TC followed a pseudo-first order kinetic model. The complete degradation of TC (degradation efficiency of 100%) was achieved within the reaction time of 25 min when ultrasound (US) was applied as enhancing agent. Furthermore, the results of total organic carbon (TOC) analysis were used to exhibit progress in the mineralization of the pollutant. The bioassay results indicated the decreased toxicity of the process effluent toward microbial population of Escherichia coli after the treatment.

Activation of persulfate via Mn doped Mg/Al layered double hydroxide for effective degradation of organics: Insights from chemical and structural variability of catalyst

Considerable interest has been focusing on the activation of peroxydisulfate (PDS) by layered double hydroxide (LDH) for degradation of organic pollutants. However, understanding the structure and chemistry of LDH by which the activation of PDS could achieve a high degradation efficiency of organic compounds is an unsolved and fundamental question in advanced oxidation processes (AOPs), and one which, if harnessed, could enable the rational design of LDH with desired material properties. In this work, Mg/Al-LDH was synthesized with variable structures and compositions through doping different proportions of Mn²⁺. We advanced to understand this question of how LDH by these characteristics can affect the activation of PDS for degradation of organic pollutants. At a relatively low dosage of Mn (˂ 1%) in Mg/Al-LDH, the degradation rate of phenol by LDH activated PDS increased with the increase content of Mn, which was achieved by an increase of catalytic sites in Mg/Al-LDH interlayer. Rather, higher content of Mn (˃ 1%) significantly lowered the degradation performance of phenol as the decrease of interlayer space resulted in reduction of PDS intercalation in LDH and the formation of secondary Mn-related minerals (i.e., Mn₃O₄) led to meaningless consumption of PDS. Finally, the degradation of phenol by LDH activated PDS followed a non-radical (¹O₂) mechanism. Our ability to quantify how the chemical and structural variability of LDH influence the activation of PDS for organic degradation could mark an important step toward synthesis strategies for advanced catalysts.

Adsorptive removal of heavy metal anions from water by layered double hydroxide: A review

High-valence heavy metals with high ecotoxicity are generally found in water in the form of anions, and this increases heavy metal pollution intensity and treatment difficulty. Recent studies have pointed to the potential efficiency of layered double hydroxides (LDHs) to meet this challenge. In this review, we retrospectively research the development of LDHs using a Java application called CiteSpace. We describe the unique layer structure, highly adjustable chemical properties, and diverse synthesis methods of LDHs, all of which decide the effective adsorption of heavy metal anions by LDHs. Subsequently, we focus on discussing the adsorption mechanism of LDHs on heavy metal anions, as well as the current state of research and future directions for microscopic interaction mechanisms. For practical applications, it is critical to improve the adsorption selectivity and stability. We then recommend solutions to improve the adsorption selectivity and stability after identifying the influencing mechanism. Finally, we provide our perspectives on the future development of LDHs adsorption of heavy metal anions.

Heterogeneous Activation of Peroxymonosulfate by a Spinel CoAl2O4 Catalyst for the Degradation of Organic Pollutants

Bimetallic catalysts have significantly contributed to the chemical community, especially in environmental science. In this work, a CoAl2O4 spinel bimetal oxide was synthesized by a facile co-precipitation method and used for the degradation of organic pollutants through peroxymonosulfate (PMS) activation. Compared with Co3O4, the as-prepared CoAl2O4 possesses a higher specific surface area and a larger pore volume, which contributes to its becoming increasingly conducive to the degradation of organic pollutants. Under optimal conditions (calcination temperature: 500 °C, catalyst: 0.1 g/L, and PMS: 0.1 g/L), the as-prepared CoAl2O4 catalyst could degrade over 99% of rhodamine B (RhB) at a degradation rate of 0.048 min−1, which is 2.18 times faster than Co3O4 (0.022 min−1). The presence of Cl− could enhance RhB degradation in the CoAl2O4/PMS system, while HCO3− and CO32− inhibit RhB degradation. Furthermore, the considerable reusability and universality of CoAl2O4 were testified. Through quenching tests, 1O2 and SO4•− were identified as the primary reactive species in RhB degradation. The toxicity evaluation verified that the degraded solution exhibited lower biological toxicity than the initial RhB solution. This study provides new prospects in the design of cost-effective and stable cobalt-based catalysts and promotes the application of PMS-based advanced oxidation processes for refractory wastewater treatment.

Synthesis and characterization of a new monometallic layered double hydroxide using manganese

This article reports for the first time the synthesis of an LDH using only manganese as the divalent and trivalent metallic ion. Analysis of the pH, redox potential, and chemical composition during the oxidation of a manganese basic salt using persulfate indicates the oxidation of 1/3 of the initial Mn^II ions, in agreement with the paramagnetic structure and XPS analysis. Infrared, Raman spectra and thermogravimetric analysis results were similar to the ones obtained with Fe-LDH also known as green rust. X-Ray diffractograms and Rietveld refinement were used to determine the structure of this solid. Thermodynamic considerations predict that this solid could reduce nitrate into gaseous nitrogen without further reduction to ammonium or ammonia unlike what is observed for Fe-LDH.

Effects of foreign metal doping on the step-by-step oxidation process in M-OMS-2 catalyzed activation of PMS

Various metal cations M (M = Mg²⁺, Ca²⁺, Zn²⁺, Cu²⁺, Fe³⁺) were doped into the tunnel of manganese octahedral molecular sieve (OMS-2). Redox-inactive metal (Ca, Mg and Zn) doped OMS-2 exhibited better peroxymonosulfate (PMS) catalytic activity than redox metal-doped Cu-OMS-2 and Fe-OMS-2. Redox-inactive metals doping improves the conductivity and reducibility of the catalyst, while transition metal doping reduces the dispersion of manganese. More importantly, the degradation of ACE can be divided into two stages. In the first stage, ACE was oxidized dominantly through mediated electron transfer process. Subsequently, singlet oxygen (¹O₂) gradually dominated oxidative degradation in the second stage, which was derived from the reaction between superoxide radical (O₂^•-) and metastable manganese intermediates. The long half-life of O₂^•- on the surface of OMS-2 ensured the delay generation of ¹O₂. This study not only provides a new idea for improving the efficiency of heterogeneous catalysts activation of PMS, but also meaningful for the in-depth study of multiple reaction mechanisms in PMS activation processes.

Mn3O4 Catalysts for Advanced Oxidation of Phenolic Contaminants in Aqueous Solutions

Water-soluble organic pollutants, such as phenolic compounds, have been exposed to environments globally. They have a significant impact on groundwater and surface water quality. In this work, different Mn3O4 catalysts were prepared for metal oxide activation of peroxymonosulfate (PMS) to remove the phenolic compound from the water environment. The as-prepared catalysts were characterized using thermogravimetric-differential thermal analysis (TG-DTA), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) surface area analysis. Furthermore, the effect of temperature and reusability of the as-prepared Mn3O4 catalysts is also investigated. The Mn3O4 nanoparticles (NPs) catalyst reveals an excellent performance for activating PMS to remove phenol compounds. Mn3O4 NPs exhibits 96.057% efficiency in removing 25 ppm within 60 min. The kinetic analysis shows that Mn3O4 NPs fitted into pseudo-first order kinetic model and exhibited relatively low energy activation of 42.6 kJ/mol. The reusability test of Mn3O4 NPs displays exceptional stability with 84.29% efficiency after three-sequential cycles. The as-prepared Mn3O4 NPs is proven suitable for phenolic remediation in aqueous solutions.

Vital Role of Synthesis Temperature in Co–Cu Layered Hydroxides and Their Fenton-like Activity for RhB Degradation

Cu and Co have shown superior catalytic performance to other transitional elements, and layered double hydroxides (LDHs) have presented advantages over other heterogeneous Fenton catalysts. However, there have been few studies about Co–Cu LDHs as catalysts for organic degradation via the Fenton reaction. Here, we prepared a series of Co–Cu LDH catalysts by a co-precipitation method under different synthesis temperatures and set Rhodamine B (RhB) as the target compound. The structure-performance relationship and the influence of reaction parameters were explored. A study of the Fenton-like reaction was conducted over Co–Cu layered hydroxide catalysts, and the variation of synthesis temperature greatly influenced their Fenton-like catalytic performance. The Co–Cut=65°C catalyst with the strongest LDH structure showed the highest RhB removal efficiency (99.3% within 30 min). The change of synthesis temperature induced bulk-phase transformation, structural distortion, and metal–oxygen (M–O) modification. An appropriate temperature improved LDH formation with defect sites and lengthened M–O bonds. Co–Cu LDH catalysts with a higher concentration of defect sites promoted surface hydroxide formation for H2O2 adsorption. These oxygen vacancies (Ovs) promoted electron transfer and H2O2 dissociation. Thus, the Co–Cu LDH catalyst is an attractive alternative organic pollutants treatment.

Three-dimensional flower-like magnetic CoFe-LDHs/CoFe2O4 composites activating peroxymonosulfate for high efficient degradation of aniline

In this study, 3D flower-like magnetic CoFe-LDHs/CoFe₂O₄ was prepared by a facile urea hydrothermal method and utilized to activate peroxymonosulfate (PMS) for degrading aniline (AN). CoFe-LDHs/CoFe₂O₄ was systematically characterized to explore the relationship between its structure and catalytic performance. Compared with CoFe-LDHs synthesized by co-precipitation method, CoFe-LDHs/CoFe₂O₄ exhibited three dimensional structure and larger specific surface, which could increase the degradation efficiency of AN markedly. 96% of 10 mg L^-1 AN could be eliminated by 0.3 mM PMS and 50 mg L^-1 CoFe-LDHs/CoFe₂O₄ at initial pH 6 within 5 min and the total organic carbon (TOC) removal efficiency could be high to 52.8% in 30 min. CoFe-LDHs/CoFe₂O₄ can be separated by a magnet easily due to its magnetism, which makes it avoid secondary pollution and provide convenience. After recycling six times, the degradation efficiency still maintained at 92.6%. Besides, CoFe-LDHs/CoFe₂O₄/PMS can degrade AN in practical water samples effectively. In addition, the possible mechanism of CoFe-LDHs/CoFe₂O₄/PMS system for the degradation of AN was proposed. The radical scavenging experiments confirmed that SO₄·^-, HO· and O₂·^- were involved and SO₄·^- played a dominant role in the degradation of AN, and it was further proved by electron Paramagnetic Resonance (EPR) as well. Our findings can provide some new insights into the efficient and skillful design and application of heterogeneous catalyst for environmental remediation.

Efficient peroxymonosulfate (PMS) activation by visible-light-driven formation of polymorphic amorphous manganese oxides

Heterogeneous sulfate radical-based advanced oxidation processes (SR-AOPs) have been widely reported over the last decade as a promising technology for pollutant removal from wastewater. In this study, a novel peroxymonosulfate (PMS) activator was obtained by visible-light-driven Mn(II) oxidation in the presence of nitrate. The photochemically synthesized manganese oxides (PC-MnO_x) were polymorphic amorphous nanoparticles and nanorods, with an average oxidation state of approximately 3.0. It possesses effective PMS activation capacity and can remove 20 mg L^-1 acid organic II (AO7) within 30 min. The AO7 removal performance of PC-MnO_x was slightly decreased in natural waterbodies and in the presence of CO₃^2-, while it showed an anti-interference capacity for Cl^-, NO₃^- and humic acid. Chemical quenching, reactive oxygen species (ROS) trapping, X-ray photoelectric spectroscopy (XPS), in-situ Raman spectroscopy, and electrochemical experiments supported a nonradical mechanism, i.e., electron transfer from AO7 to the metastable PC-MnO_x-PMS complex, which was responsible for AO7 oxidation. The PC-MnO_x-PMS system also showed substrate preferences based on their redox potentials. Moreover, PC-MnO_x could activate periodate (PI) but not peroxydisulfate (PDS) or H₂O₂. Overall, this study provides a new catalyst for PMS activation through a mild and green synthesis approach.

Cobalt-ferrite/Ag-fMWCNT hybrid nanocomposite catalyst for efficient degradation of synthetic organic dyes via peroxymonosulfate activation

The activation of peroxymonosulfate (PMS) by nanocatalysts has shown promise as an effective wastewater treatment protocol. Magnetic CoFe₂O₄/Ag-nanoparticles (NPs) anchored on functionalized multiwalled carbon nanotubes (fMWCNTs), a support material, were synthesized using a one-pot solvothermal method. The surface morphologies and physicochemical properties of the CoFe₂O₄/Ag-fMWCNT hybrid nanocomposite catalyst were investigated by powder X-ray diffraction analysis, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and nitrogen adsorption-desorption isotherms. The activity of the nanocomposite combined with PMS (serving as an activator) toward the degradation of rhodamine B, methylene blue, methyl orange, and methyl red was investigated. The obtained optimal 0.02 g CoFe₂O₄/Ag-fMWCNTs exhibited the highest PMS activation performance, with a removal percentage of 100% for 20 ppm dye concentration at pH 6.5 within 14 min. In addition, the rhodamine B degradation product was investigated by analyzing the intermediate products by liquid chromatography/mass spectrometry (LC-MS). The homogeneous distribution of CoFe₂O₄/Ag NPs on fMWCNTs accelerated PMS activation and enhanced the catalytic degradation of dyes. The effects of the reaction parameters on the dye degradation efficiency were investigated by using different nanocatalysts (fMWCNTs, CoFe₂O₄/fMWCNTs, and CoFe₂O₄/Ag-fMWCNTs) as well as by varying the pH (3-11), dye concentration (10-50 mg/l), catalyst dose (0.002-0.3 g), and PMS dose (0.02-0.1 g). Quenching experiments revealed that sulfate radicals are primarily responsible for rhodamine B degradation. A plausible mechanism for catalytic PMS activation was also proposed. Complete decolorization occurred within the first few minutes of the reaction. Furthermore, the catalytic activity of the CoFe₂O₄/Ag-fMWCNT/PMS hybrid nanocomposite remained stable after five successive cycles. This study verifies the applicability of CoFe₂O₄/Ag-fMWCNTs as an ultrafast catalyst for the complete removal of persistent organic pollutants via PMS activation, revealing their promising application in wastewater treatment.

Green synthesis of manganese-cobalt-tungsten composite oxides for degradation of doxycycline via efficient activation of peroxymonosulfate

The advanced oxidation process of peroxymonosulfate activated by solid catalyst is one of the main technologies to solve the pollution of antibiotics in water environment.In this work, a series of composites (MCW) containing Mn, Co, and W were synthesized using green ball milling, which does not produce the three wastes (waste gas, waste water and industrial residue). It shows a unique and high catalytic activity for peroxymonosulfate-based degradation of doxycycline (DC) under the pH condition between 4 and 9, and it can be reused five times. MCW composites remove DC using singlet oxygen and superoxide free radicals, as well as a large number of oxygen vacancies for electron storage. The formation rate of free radicals is determined by the conversion rates of Mn³⁺/Mn²⁺ and Co³⁺/Co²⁺. In addition, there are three ways to degrade DC to form 18 kinds of intermediates, and the toxicity of all the intermediates were predicted by ECOSAR program. The highly active catalysts obtained using a green synthetic route for the activation of peroxymonosulfate show a great potential for decontamination of antibiotics wastewater.

Gravity-driven layered double hydroxide nanosheet membrane activated peroxymonosulfate system for micropollutant degradation

For the first time in this study, CoAl-layered double hydroxide nanosheet membrane (LDH_m) with abundant active sites was fabricated for peroxymonosulfate (PMS) activation with the mindset to catalytically degrade micropollutants. Depending on the catalyst loading, the developed LDH_m can be driven under gravity at a permeate flux of approximately 80 L/m² h and 210 L/m² h at LDH loading of 0.80 mg/cm² and 0.08 mg/cm², respectively. Notably, the LDH_m (0.63 mg) exhibited excellent PMS activation efficiency as indicated by 87.8% removal of the probe chemical (ranitidine) at 0.2 mM PMS, which was higher than that (37-44%) achieved by conventional LDH (5-20 mg)/PMS (0.2 mM) system. In addition to efficient degradation of several micropollutants, LDH_m/PMS performance was not inhibited by variation in solution pH (4-8) as well as during long-term (29 h) continuous-flow operation. SO₄^•- and ¹O₂ were identified as the primary reactive species in the LDH_m/PMS system, while both Co and Al participated in PMS activation. This study offers a simple strategy for efficient removal of several micropollutants with significantly reduced catalyst leaching, which could be applied sustainably in water treatment.

Enhancement strategies for efficient activation of persulfate by heterogeneous cobalt-containing catalysts: A review

As a clean and efficient technology for the degradation of organic contaminants, sulfate radical based advanced oxidation processes (SR-AOPs) have attracted more and more attention in the past decades. Cobalt is regarded as the most reactive and efficient non-noble metal catalyst for the activation of persulfate including peroxymonosulfate (PMS) and peroxydisulfate (PDS) to produce sulfate radicals. Due to the limitations of homogeneous catalytic systems, the heterogeneous cobalt-containing catalysts have been emerged and rapidly developed. Various strategies have been schemed to further enhance the activation ability of persulfate by heterogeneous cobalt-containing catalysts. This paper provides an overview on the recent progress in enhancement strategies for the highly efficient activation of persulfate by heterogeneous cobalt-containing catalysts. With a brief introduction on the chemistry and feature of sulfate radical reactions catalyzed by homogeneous Co²⁺/Co³⁺ species, the main strategies for enhancing persulfate activation by heterogeneous cobalt-containing catalysts are summarized, such as surface and morphology design, multiple reactive centers design, organic-inorganic hybrids and heterostructure composites. Future perspectives of heterogeneous SR-AOPs systems catalyzed by cobalt-containing catalysts are outlined.