Disinfection by-products formation and ecotoxicological effects of effluents treated with peracetic acid: A review

Effects of prolonged application of peracetic acid-based disinfectant on recirculating aquaculture systems stocked with Atlantic salmon parr

The use of recirculating aquaculture systems (RAS) for Atlantic salmon (Salmo salar) production has become increasingly common. RAS water disinfection plays a crucial role on its biosecurity. Peracetic acid (PAA) is a promising disinfectant due to its powerful oxidative properties, broad antimicrobial spectrum, and rapid degradation into no harmful compounds. This study focused on assessing the consequences of prolonged application of a PAA-based disinfectant in a RAS stocked with salmon parr. The experiment included three treatment groups in triplicate: 0 mg/L PAA (control), 0.1 mg/L PAA, and 1 mg/L PAA, using nine-replicated RAS with a total of 360 fish (14.8 ± 2.3 g; N = 40/RAS). The study spanned 28 days, with samples collected on days 0, 14, and 28. The analyzed parameters were water quality, and fish parameters, including external welfare indicators, gill histology, total antioxidant capacity (TAC), reactive oxygen species/reactive nitrogen species (ROC/RNC), oxidative stress biomarkers related to DNA and protein, cellular DNA damage, and global gene expression. While water quality remained relatively stable, there was an increase in bacterial populations in the groups exposed to PAA, particularly 1 mg/L PAA. Fish weight did not differ between the control and PAA-exposed groups. TAC, ROC/RNC, and oxidative stress biomarkers exhibited similar trends. The study identified >400 differentially expressed genes (DEGs) in the skin, gill, and olfactory organ, with many of these DEGs associated with immune responses. Comparing the transcriptomic profiles of the three tissue organs revealed that the olfactory organ was the most reactive to PAA treatment. This study shows that calculated PAA concentrations of 0.1 mg/L and 1 mg/L in the pump-sump, contributed to an increase of bacteria whereas no detectable differences in health and welfare of salmon parr were found. These findings are promising for the implementation of PAA-based disinfectants in RAS stoked with Atlantic salmon parr.

Activation of peracetic acid by electrodes using biogenic electrons: A novel energy- and catalyst-free process to eliminate pharmaceuticals

Peracetic acid (PAA) has received increasing attention as an alternative oxidant for wastewater treatment. However, existing processes for PAA activation to generate reactive species typically require external energy input (e.g., electrically and UV-mediated activation) or catalysts (e.g., Co2+), inevitably increasing treatment costs or introducing potential new contaminants that necessitate additional removal. In this work, we developed a catalyst-free, self-sustaining bioelectrochemical approach within a two-chamber bioelectrochemical system (BES), where a cathode electrode in-situ activates PAA using renewable biogenic electrons generated by anodic exoelectrogens (e.g., Geobacter) degrading biodegradable organic matter (e.g., acetic acid) in wastewater at the anode. This innovative BES-PAA technique achieved 98 % and 81 % removal of 2 µM sulfamethoxazole (SMX) in two hours at pH 2 (cation exchange membrane) and pH 6 (bipolar membrane) using 100 μM PAA without external voltage. Mechanistic studies, including radical quenching, molecular probe validation, electron spin resonance (ESR) experiments, and density functional theory (DFT) calculations, revealed that SMX degradation was driven by reactive species generated via biogenic electron-mediated OO cleavage of PAA, with CH3C(O)OO• contributing 68.1 %, •OH of 18.4 %, and CH3C(O)O• of 9.4 %, where initial formation of •OH and CH3C(O)O• rapidly reacts with PAA to produce CH3C(O)OO•. The presence of common water constituents such as anions (e.g., Cl-, NO3-, and H2PO4-) and humic acid (HA) significantly hinders SMX removal via the BES-PAA technique, whereas CO32- and HCO3- ions have a comparatively minor impact. Additionally, the study investigated the removal of various pharmaceuticals present in secondary treated municipal wastewater, attributing differences in removal efficiency to the selective action of CH3C(O)OO•. This research demonstrates a novel PAA activation method that is ecologically benign, inexpensive, and capable of overcoming catalyst deactivation and secondary pollution issues.

Pre-exposure to peracetic acid followed by UV treatment for deactivating vancomycin-resistant Enterococcus faecalis through intracellular attack

Antimicrobial resistance (AMR) poses a global health threat to aquatic environments and its propagation is a hot topic. Therefore, deactivating antibiotic-resistant bacteria (ARB) and removing antibiotic resistance genes (ARGs) from water is crucial for controlling AMR transmission. Peracetic acid (PAA), which is known for its potent oxidizing properties and limited by-product formation, is emerging as a favorable disinfectant for water treatment. In this study, we aimed to assess the efficacy of pre-exposure to PAA followed by UV treatment (PAA-UV/PAA) compared with the simultaneous application of UV and PAA (UV/PAA). The focus was on deactivating vancomycin-resistant Enterococcus faecalis (VREfs), a typical ARB in water. Pre-exposure to PAA significantly enhanced the efficacy of subsequent UV/PAA treatment. At a UV fluence of 7.2 mJ cm-2, the PAA-UV/PAA method achieved a 6.21 log reduction in VREfs, surpassing the 1.29 log reduction observed with UV/PAA. Moreover, compared to UV/PAA, PAA-UV/PAA showed increased efficacy with longer pre-exposure times and higher PAA concentrations, maintaining superior performance across a broad pH range and in the presence of humic acid. Flow cytometry analysis indicated minimal cellular membrane damage using both methods. However, the assessments of superoxide dismutase (SOD) activity and adenosine triphosphate content revealed that PAA-UV/PAA induced greater oxidative stress under similar UV irradiation conditions, leading to slower bacterial regrowth. Specifically, SOD activity in PAA-UV/PAA surged to 3.06 times its baseline, exceeding the 1.73-fold increase under UV/PAA conditions. Additionally, pre-exposure to PAA amplified ARGs degradation and reduced resistance gene leakage, effectively mitigating the spread of AMR. Pre-exposure to 200 μM PAA for 10 and 20 min enhanced vanB gene removal efficiency by 0.14 log and 1.29 log, respectively. Our study provides a feasible approach for optimizing UV/PAA disinfection for efficient removal of ARB and ARGs.

Ecotoxicological evaluation of effluent from bovine slaughterhouses disinfected by peracetic acid (PAA) using the bioindicator Girardia tigrina

The evaluation of the ecotoxicological effects of the effluent after treatment with peracetic acid is relevant to help establish reference concentrations for the disinfection process and waste recovery. Therefore, the objective of this work was to evaluate the ecotoxicity of effluent from a bovine slaughterhouse treated with peracetic acid on Girardia tigrina. The toxicity bioassays for planaria were the acute test (LC50) and chronic assays: locomotion, regeneration, reproduction and fertility. The results showed that the effluent treated with peracetic acid showed less toxicity than the effluent without application of peracetic acid. The effluent after peracetic acid application showed a chronic toxic effect in the reduction of locomotor speed in all studied disinfectant concentrations (0.8, 1.6, 3.3 and 6.6 μg L-1 of peracetic acid) and a delay in the formation of G. tigrina photoreceptors at the concentration of 6.6 μg L-1 of peracetic acid. Peracetic acid concentrations of 0.8, 1.6 and 3.3 μg L-1 were not toxic for blastema regeneration, photoreceptor and auricle formation, fecundity and fertility. In addition, this study assists in defining doses of peracetic acid to be recommended in order to ensure the wastewater disinfection process without causing harm to aquatic organisms.

Effect of microwaves combined with peracetic acid to improve the dewatering performance of residual sludge

The activated sludge process plays a crucial role in modern wastewater treatment plants. During the treatment of daily sewage, a large amount of residual sludge is generated, which, if improperly managed, can pose burdens on the environment and human health. Additionally, the highly hydrated colloidal structure of biopolymers limits the rate and degree of dewatering, making mechanical dewatering challenging. This study investigates the impact and mechanism of microwave irradiation (MW) in conjunction with peracetic acid (PAA) on the dewatering efficiency of sludge. Sludge dewatering effectiveness was assessed through capillary suction time (CST) and specific resistance to filtration (SRF). Examination of the impact of MW-PAA treatment on sludge dewatering performance involved assessing the levels of extracellular polymeric substances (EPS), employing three-dimensional excitation-emission matrix (3D-EEM), Fourier transform-infrared spectroscopy (FT-IR), and scanning electron microscopy. Findings reveal that optimal dewatering performance, with respective reductions of 91.22% for SRF and 84.22% for CST, was attained under the following conditions: microwave power of 600 W, reaction time of 120 s, and PAA dosage of 0.25 g/g MLSS. Additionally, alterations in both sludge EPS composition and floc morphology pre- and post-MW-PAA treatment underwent examination. The findings demonstrate that microwaves additionally boost the breakdown of PAA into •OH radicals, suggesting a synergistic effect upon combining MW-PAA treatment. These pertinent research findings offer insights into employing MW-PAA technology for residual sludge treatment.

Peracetic acid treatment of squid eggs infected with parasitic copepod (Ikanecator primus gen. et sp. nov.)

Having been successfully bred in semi-intensive and intensive aquaculture systems, oval squids of the Sepioteuthis lessoniana species complex are emerging as promising candidates for research and industry. Nevertheless, information about pathogens and diseases that may affect squid aquaculture remains sparse. In this study, we identify new parasitic copepod species that causes squid mortality and decreases squid hatching rates, and we also offer a solution to eliminate the pathogen during incubation of squid eggs. The newly discovered copepod Ikanecator primus gen. et sp. nov. was identified on oval squid eggs for the first time using both morphological and molecular diagnostic markers. In the genomes of the copepod and associated microbiome, we identified multiple genes for enzymes involved in cephalopod eggshell degradation in genomes of the copepod and associated microbiome. Furthermore, we conducted experiments to assess efficacy of peracetic acid in inhibiting the I. primus gen. et sp. nov. both in vitro and in vivo using immersion treatment. We established that a 2-min exposure to a concentration of 250 μl/L of peracetic acid containing product (PAA-product; 35 mg/L PAA and 15 mg/L H2O2) inhibited the development of nauplii in vitro. All parasites exposed to a concentration of 500 μl/L of PAA-product (70 mg/L PAA and 30 mg/L H2O2) were eliminated within two minutes. On top of this, the immersion treatment with 500 μl/L of PAA-product (70 mg/L PAA and 30 mg/L H2O2) improved survival of squid embryos and increased size of squid hatchlings compared with control and the immersion treatment with 125 μl/L of PAA-product (17.5 mg/L PAA and 7.5 mg/L H2O2) and the immersion treatment with 250 μl/L of PAA-product (35 mg/L PAA and 15 mg/L H2O2). These findings suggest that PAA holds a great potential as inhibitor and controller of parasitic copepod infections and for overall health management in cephalopod culture.

Insight into the Discriminative Efficiencies and Mechanisms of Peroxy Activation via Fe/Cu Bimetallic Catalysts for Wastewater Purification

Fe/Cu bimetallic catalysts have a synergistic effect that can effectively enhance catalytic activity, so Fe/Cu bimetallic catalysts have been extensively studied. However, the efficacy and mechanisms of Fe/Cu bimetallic catalysts' peroxidation activation have rarely been explored. In this study, Fe/Cu bimetallic materials were fabricated to catalyze different oxidizing agents, including peroxymonosulfate (PMS), peroxydisulfate (PDS), peroxyacetic acid (PAA), and hydrogen peroxide (H2O2), for the degradation of sulfamethoxazole (SMX). The Fe/Cu/oxidant systems exhibited an excellent degradation efficiency of sulfamethoxazole (SMX). In the Fe/Cu/PMS, Fe/Cu/PDS, and Fe/Cu/PAA systems, the main reactive oxygen species (ROS) responsible for SMX degradation were hydroxyl radical (•OH) and singlet oxygen (1O2), while the main ROS was only •OH in the H2O2 system. The differences in the surface structure of the materials before and after oxidation were examined, revealing the presence of a large amount of flocculent material on the surface of the oxidized PMS material. Anion experiments and actual body experiments also revealed that the PMS system had a strong anti-interference ability. Finally, a comprehensive comparison concluded that the PMS system was the optimal system among the four oxidation systems. Overall, this work revealed that the PMS oxidant has a better catalytic degradation of SMX compared to other oxidizers for Fe/Cu, that PMS generates more ROS, and that the PMS system has a stronger resistance to interference.

Synergistic effects of peracetic acid and free ammonia pretreatment on anaerobic fermentation of waste activated sludge to promote short-chain fatty acid production for polyhydroxyalkanoate biosynthesis: Mechanisms and optimization

Peracetic acid (PAA) combined with free ammonia (FA) pretreatment can be utilized to promote anaerobic fermentation (AF) of waste activated sludge (WAS) to produce short-chain fatty acids (SCFAs), and the resulting SCFAs are desirable carbon sources (C-sources) for polyhydroxyalkanoate (PHA) biosynthesis. This work aimed to determine the optimum conditions for PAA + FA pretreatment of sludge AF and the feasibility of using anaerobic fermentation liquor (AFL) for PHA production. To reveal the mechanisms of integrated pretreatment, the impacts of PAA + FA pretreatment on different stages of sludge AF and changes in the microbial community structure were explored. The experimental results showed that the maximum SCFA yield reached 491.35 ± 6.02 mg COD/g VSS on day 5 after pretreatment with 0.1 g PAA/g VSS +70 mg FA/L, which was significantly greater than that resulting from PAA or FA pretreatment alone. The mechanism analysis showed that PAA + FA pretreatment promoted sludge solubilization but strongly inhibited methanogenesis. According to the analysis of the microbial community, PAA + FA pretreatment changed the microbial community structure and promoted the enrichment of bacteria related to hydrolysis and acidification, and Proteiniclasticum, Macellibacteroides and Petrimonas became the dominant hydrolytic and acidifying bacteria. Finally, after alkali treatment, the AFL was utilized for batch-mode PHA production, and a maximum PHA yield of 55.05 wt% was achieved after five operation periods.

Overlooked Role of Coexistent Hydrogen Peroxide in Activated Peracetic Acid by Cu(II) for Enhanced Oxidation of Organic Contaminants

Cu(II)-catalyzed peracetic acid (PAA) processes have shown significant potential to remove contaminants in water treatment. Nevertheless, the role of coexistent H2O2 in the transformation from Cu(II) to Cu(I) remained contentious. Herein, with the Cu(II)/PAA process as an example, the respective roles of PAA and H2O2 on the Cu(II)/Cu(I) cycling were comprehensively investigated over the pH range of 7.0-10.5. Contrary to previous studies, it was surprisingly found that the coexistent deprotonated H2O2 (HO2-), instead of PAA, was crucial for accelerating the transformation from Cu(II) to Cu(I) (kHO2-/Cu(II) = (0.17-1) × 106 M-1 s-1, kPAA/Cu(II) < 2.33 ± 0.3 M-1 s-1). Subsequently, the formed Cu(I) preferentially reacted with PAA (kPAA/Cu(I) = (5.84 ± 0.17) × 102 M-1 s-1), rather than H2O2 (kH2O2/Cu(I) = (5.00 ± 0.2) × 101 M-1 s-1), generating reactive species to oxidize organic contaminants. With naproxen as the target pollutant, the proposed synergistic role of H2O2 and PAA was found to be highly dependent on the solution pH with weakly alkaline conditions being more conducive to naproxen degradation. Overall, this study systematically investigated the overlooked but crucial role of coexistent H2O2 in the Cu(II)/PAA process, which might provide valuable insights for better understanding the underlying mechanism in Cu-catalyzed PAA processes.

Peracetic acid as an alternative disinfectant for micropollutants degradation and disinfection byproducts control in outdoor swimming pools

Peracetic acid (PAA) has garnered significant interest as a novel alternative to chlorine-based disinfectants for water treatment due to its broad-spectrum antimicrobial activity and its ability of reactive species generation when exposed to UV light. However, limited studies have investigated micropollutant degradation in the presence of PAA under solar irradiation. This is the first study to comprehensively investigate the photodegradation of caffeine (CAF) and 4-methylbenzylidene camphor (4-MBC) and the removal of disinfection byproducts (DBPs) in the presence of PAA under simulated solar light. The study revealed that the photodegradation of CAF and 4-MBC was significantly enhanced in the presence of PAA, following pseudo-first-order kinetics (R2 > 0.98) with reaction rates (kobs) of 0.220 and 0.111 h-1, respectively. In addition, substantial reduction of 21 DBPs, including trihalomethanes, haloacetic acids and haloacetonitriles, and no DBPs formation were observed in the presence of PAA and simulated solar irradiation. The proportion of coexisting H2O2 in the PAA solution considerably influenced target compounds degradation. CAF and 4-MBC were degraded faster under acidic conditions than under alkaline conditions. Hydroxyl radicals (·OH) dominated the degradation of CAF at different pH values, while direct photolysis and other reactive species played a major role in the degradation of 4-MBC.

Underlying the mechanisms of pathogen inactivation and regrowth in wastewater using peracetic acid-based disinfection processes: A critical review

Peracetic acid (PAA) disinfection is an emerging wastewater disinfection process. Its advantages include excellent pathogen inactivation performance and little generation of toxic and harmful disinfection byproducts. The objective of this review is to comprehensively analyze the experimental data and scientific information related to PAA-based disinfection processes. Kinetic models and modeling frameworks are discussed to provide effective tools to assess pathogen inactivation efficacy. Then, the efficacy of PAA-based disinfection processes for pathogen inactivation is summarized, and the inactivation mechanisms involved in disinfection and the interactions of PAA with conventional disinfection processes are elaborated. Subsequently, the risk of pathogen regrowth after PAA-based disinfection process is clearly discussed. Finally, to address ecological risks related to PAA-based disinfection, its impact on the spread of antibiotic-resistant bacteria and the transfer of antibiotic resistance genes (ARGs) is also assessed. Among advanced PAA-based disinfection processes, ultraviolet/PAA is promising not only because it has practical application value but also because pathogen regrowth can be inhibited and ARGs transfer risk can be significantly reduced via this process. This review presents valuable and comprehensive information to provide an in-depth understanding of PAA as an alternative wastewater disinfection technology.

Disinfection efficiency of chlorine dioxide and peracetic acid against MNV-1 and HAV in simulated soil-rich wash water

Wash water from fresh vegetables and root vegetables is an important vehicle for foodborne virus transmission. However, there is lack of assessing rapid viral inactivation strategies in wash water characterized by a high soil content at the post-harvest stage. Considering the significance of food safety during the washing stage for fresh and root vegetable produce prior to marketing, we assessed the inactivation efficacy by using chlorine dioxide (ClO2) and peracetic acid (PAA) against a surrogate of human norovirus (murine norovirus 1, MNV-1) and hepatitis A virus (HAV), in wash water containing black soil and clay loam. The results indicated that MNV-1 and HAV were reduced to the process limit of detection (PLOD), with reductions ranging from 4.89 to 6.35 log10 PFU, and 4.63 to 4.96 log10 PFU when treated with ClO2 at 2.5 ppm for 10 mins. Comparatively, when treated with 500 ppm of PAA for 10 mins, MNV-1 and HAV were maximum reduced to 1.75 ± 0.23 log10 PFU (4.50 log10 PFU reduction) and 2.13 ± 0.12 log10 PFU (2.72 log10 PFU reduction). This demonstrated the efficacy of ClO2 in eliminating foodborne viruses in soil-rich wash water. When we validated the recovery of the virus from two types of wash water, the pH (9.24 ± 0.33 and 5.95 ± 0.05) had no impact on the recovery of MNV-1, while the recovery of HAV was less than 1 %. By adjusting the pH to a neutral level, recovery of HAV and its RNA levels was increased to 15.94 and 3.89 %. Thus, this study emphasized the critical role of pH in the recovery of HAV from the complex soil-rich aqueous environment, and the efficacy of ClO2 serving as a pivotal reference for the development of control strategies against foodborne viruses in the supply chain of fresh and root vegetables.

Activation of Peracetic Acid by CoFe2O4 for Efficient Degradation of Ofloxacin: Reactive Species and Mechanism

Peroxyacetic acid (PAA)-based advanced oxidation processes (AOPs) have attracted much attention in wastewater treatment by reason of high selectivity, long half-life reactive oxygen species (ROS), and wider applicability. In this study, cobalt ferrite (CoFe2O4) was applied to activate PAA for the removal of ofloxacin (OFX). The degradation of OFX could reach 83.0% via the CoFe2O4/PAA system under neutral conditions. The low concentration of co-existing anions and organic matter displayed negligible influence on OFX removal. The contributions of hydroxyl radicals (·OH), organic radicals (R-O·), and other reactive species to OFX degradation in CoFe2O4/PAA were systematically evaluated. Organic radicals (especially CH3C(O)OO·) and singlet oxygen (1O2) were verified to be the main reactive species leading to OFX destruction. The Co(II)/Co(III) redox cycle occurring on the surface of CoFe2O4 played a significant role in PAA activation. The catalytic performance of CoFe2O4 remained above 80% after five cycles. Furthermore, the ecotoxicity of OFX was reduced after treatment with the CoFe2O4/PAA system. This study will facilitate further research and development of the CoFe2O4/PAA system as a new strategy for wastewater treatment.

Mechanistic Insight for Disinfection Byproduct Formation Potential of Peracetic Acid and Performic Acid in Halide-Containing Water

Peracetic acid (PAA) and performic acid (PFA) are two major peroxyacid (POA) oxidants of growing usage. This study reports the first systematic evaluation of PAA, PFA, and chlorine for their disinfection byproduct (DBP) formation potential in wastewater with or without high halide (i.e., bromide or iodide) concentrations. Compared with chlorine, DBP formation by PAA and PFA was minimal in regular wastewater. However, during 24 h disinfection of saline wastewater, PAA surprisingly produced more brominated and iodinated DBPs than chlorine, while PFA effectively kept all tested DBPs at bay. To understand these phenomena, a kinetic model was developed based on the literature and an additional kinetic investigation of POA decay and DBP (e.g., bromate, iodate, and iodophenol) generation in the POA/halide systems. The results show that PFA not only oxidizes halides 4-5 times faster than PAA to the corresponding HOBr or HOI but also efficiently oxidizes HOI/IO- to IO3-, thereby mitigating iodinated DBP formation. Additionally, PFA's rapid self-decay and slow release of H2O2 limit the HOBr level over the long-term oxidation in bromide-containing water. For saline water, this paper reveals the DBP formation potential of PAA and identifies PFA as an alternative to minimize DBPs. The new kinetic model is useful to optimize oxidant selection and elucidate involved DBP chemistry.

Bacteria and Virus Inactivation: Relative Efficacy and Mechanisms of Peroxyacids and Chlor(am)ine

Peroxyacids (POAs) are a promising alternative to chlorine for reducing the formation of disinfection byproducts. However, their capacity for microbial inactivation and mechanisms of action require further investigation. We evaluated the efficacy of three POAs (performic acid (PFA), peracetic acid (PAA), and perpropionic acid (PPA)) and chlor(am)ine for inactivation of four representative microorganisms (Escherichia coli (Gram-negative bacteria), Staphylococcus epidermidis (Gram-positive bacteria), MS2 bacteriophage (nonenveloped virus), and Φ6 (enveloped virus)) and for reaction rates with biomolecules (amino acids and nucleotides). Bacterial inactivation efficacy (in anaerobic membrane bioreactor (AnMBR) effluent) followed the order of PFA > chlorine > PAA ≈ PPA. Fluorescence microscopic analysis indicated that free chlorine induced surface damage and cell lysis rapidly, whereas POAs led to intracellular oxidative stress through penetrating the intact cell membrane. However, POAs (50 μM) were less effective than chlorine at inactivating viruses, achieving only ∼1-log PFU removal for MS2 and Φ6 after 30 min of reaction in phosphate buffer without genome damage. Results suggest that POAs' unique interaction with bacteria and ineffective viral inactivation could be attributed to their selectivity toward cysteine and methionine through oxygen-transfer reactions and limited reactivity for other biomolecules. These mechanistic insights could inform the application of POAs in water and wastewater treatment.

Environmental occurrence, risk, and removal strategies of pyrazolones: A critical review

Pyrazolones, widely used as analgesic and anti-inflammatory pharmaceuticals, have become a significant concern because of their persistence and widespread presence in engineered (e.g., wastewater treatment plants) and natural environments. Thus, the urgent task is to ensure the effective and cost-efficient removal of pyrazolones. Advanced oxidation processes are the most commonly used removal method. Furthermore, the biodegradation of pyrazolones has been exploited using microbial communities or pure strains; however, screening for efficient degrading bacteria and clarifying the biodegradation mechanisms required further research. In this critical review, we overview the environmental occurrence of pyrazolones, their potential ecological health risks, and their corresponding removal techniques (e.g., O3 oxidation, photocatalysis, and Fenton-like process). We also emphasize the prospects for the risk and contamination control of pyrazolones in various environments using physicochemical-biochemical coupling technology. Collectively, the environmental occurrence of pyrazolones poses significant public health concerns, necessitating heightened attention and the implementation of effective methods to minimize their environmental risks.

Ag Nanoparticle and Ti-MOF Cooperativity for Efficient Inactivation of E. coli in Water

Because of the limitations of traditional chlorine-based bactericidal water treatment, such as the formation of disinfection byproducts (DBPs) and resistance to chlorine, novel approaches and materials are required for effective disinfection of water. This study focuses on the development of a new sterilization material, Ag/NH2-MIL-125(Ti), which was designed to effectively inactivate Escherichia coli in water. The effectiveness of the as-designed material stems from the synergistic interactions between Ag nanoparticles (NPs) and photoactive metal-organic frameworks (MOFs). In this complex material, the MOFs play a critical role in dispersing and isolating the Ag NPs, thus preventing undesirable aggregation during bacterial inactivation. Simultaneously, Ag NPs enhance the photocatalytic performance of the MOFs. Sterilization experiments demonstrate the remarkable rapid E. coli inactivation performance of Ag/NH2-MIL-125(Ti) under illuminated and nonilluminated conditions. Within 25 min of visible light exposure, the as-prepared material achieves a >7-log E. coli reduction. In addition, Ag/NH2-MIL-125(Ti) efficiently decomposes acetic acid, which is the main DBP precursor, under visible light irradiation. Mechanistic investigations revealed that •O2- and h+ were the primary active substances responsible for the inactivation of E. coli and the decomposition of acetic acid, respectively.

Combination of peracetic acid dosing with diffused aeration in municipal wastewater treatment

Wastewater aeration is an important unit operation that provides dissolved oxygen for microorganisms in wastewater treatment. In this study, the impact of peracetic acid (PAA) dosing on wastewater aeration was assessed in terms of oxygen transfer, visual observation of bubble size changes, and evolution of dissolved oxygen from PAA (and H2O2) decomposition. Oxygen transfer coefficients improved with PAA concentrations of up to 7 mg/L, which was probably due to the smaller bubbles being formed from the aeration diffuser and evolution of small bubbles from PAA (and H2O2) decomposition. At a PAA concentration higher than 7 mg/L, the accumulation of acetate molecules to the gas-liquid interface of bubbles likely began to counteract the positive impact of bubble size decrease by increasing the mass transfer resistance of oxygen from bubbles to water. Finally, a continuous bench-scale primary effluent aeration experiment demonstrated that at a continuous PAA dosing of 1 mg/L, the air input by a compressor could be decreased by 54%, while keeping the oxygen level constant at approximately 1.5 mg/L. PAA dosing could be combined, for example, with aerated grit removal to enhance the primary effluent aeration together with additional benefits of partial disinfection and odor formation prevention.

Evaluation of algaecide effectiveness of five different oxidants applied on harmful phytoplankton

Harmful algal blooms (HABs) in coastal areas similarly impact both ecosystems and human health. The translocation of phytoplankton species via maritime transport can potentially promote the growth of HABs in coastal systems. Accordingly, ballast water must be disinfected. The main goal of this study is to assess the effectiveness of different emerging biocides, including H₂O₂, peracetic acid (PAA), peroxymonosulfate (PMS), and peroxydisulfate (PDS). The effectiveness of these biocides is compared with that of conventional chlorination methods. Their effects on two ichthyotoxic microalgae with worldwide distribution, i.e., Prymnesium parvum and Heterosigma akashiwo, are examined. To ensure the prolonged effectiveness of the different reagents, their concentration-response curves for 14 days are constructed and examined. The results suggest a strong but shorter effect by PMS (EC50 = 0.40-1.99 mg·L^-1) and PAA (EC50 = 0.32-2.70 mg·L^-1), a maintained effect by H₂O₂ (EC50 = 6.67-7.08 mg·L^-1), and a negligible effect by PDS. H. akashiwo indicates higher resistance than P. parvum, except when H₂O₂ is used. Based on the growth inhibition performance and consumption of the reagents as well as a review of important aspects regarding their application, using H₂O₂, PAA, or PMS can be a feasible alternative to chlorine-based reagents for inhibiting the growth of harmful phytoplankton.

Persistence kinetics of a novel disinfectant peracetic acid for swimming pool disinfection

Disinfection is essential to swimming pool water (SPW) quality. Peracetic acid (PAA) has attracted attention for water disinfection for advantages such as less formation of regulated DBPs. Persistence kinetics of disinfectants is difficult to elucidate in pools because of the complex water matrix stemming from body fluid loadings from swimmers and long residence times. In this research, the persistence kinetics of PAA was investigated in SPW benchmarked against free chlorine, use bench-scale experiments and model simulation. Kinetics models were developed to simulate the persistence of PAA and chlorine. The stability of PAA was less sensitive to swimmer loadings than chlorine. An average swimmer loading event reduced the apparent decay rate constant of PAA by 66 %, a phenomenon that diminished with increasing temperatures. L-histidine and citric acid from swimmers were identified as main retardation contributors. By contrast, a swimmer loading event instantaneously consumed 70-75 % of the residual free chlorine. The required total dose of PAA was 97 % less than chlorine under the 3-days cumulative disinfection mode. Temperature was positively correlated with disinfectant decay rate, with PAA being more sensitive than chlorine. These results shed light on the persistence kinetics of PAA and its influential factors in swimming pool settings.

Phosphate enhanced Cu(II)/peracetic acid process for diclofenac removal: Performance and mechanism

Since limitedly existing researches suggested Cu(II) had deficiently catalytic ability to PAA, in this work, we tested the oxidation performance of Cu(II)/PAA system on diclofenac (DCF) degradation under neutral conditions. It was found that overwhelming DCF removal could be obtained in Cu(II)/PAA system at pH 7.4 using phosphate buffer solution (PBS) compared to poor loss of DCF without PBS, and the apparent rate constant of DCF removal in PBS/Cu(II)/PAA system was 0.0359 min^-1, 6.53 times of that in Cu(II)/PAA system. Organic radicals (i.e., CH₃C(O)O• and CH₃C(O)OO•) were evidenced as the dominant contributors to DCF destruction in PBS/Cu(II)/PAA system. PBS motivated the reduction of Cu(II) to Cu(I) through chelation effect, and then the activation of PAA by Cu(I) was facilitated. Besides, due to the steric hindrance of Cu(II)-PBS complex (CuHPO₄), PAA activation was mediated from non-radical-generating pathway to radical-generating pathway, leading to desirably effective DCF removal by radicals. The transformation of DCF mainly experienced hydroxylation, decarboxylation, formylation and dehydrogenation in PBS/Cu(II)/PAA system. This work proposes the potential of coupling of phosphate and Cu(II) in optimizing PAA activation for organic pollutants elimination.

Disinfection byproducts of iopamidol, iohexol, diatrizoate and their distinct acute toxicity on Scenedesmus sp., Daphnia magna and Danio rerio

The COVID-19 pandemic resulted in increasing the usage of iodinated contrast media (ICM), and thus an increase in the prevalence of ICM-contaminated wastewater. While ICM is generally safe, this has the potential to be problematic because as medical wastewater is treated and disinfected, various ICM-derived disinfection byproducts (DBPs) may be generated and released into the environment. However, little information was available about whether ICM-derived DBPs are toxic to aquatic organisms. In this study, the degradation of three typical ICM (iopamidol, iohexol, diatrizoate) at initial concentration of 10 μM and 100 μM in chlorination and peracetic acid without or with NH₄⁺ was investigated, and the potential acute toxicity of treated disinfected water containing potential ICM-derived DBPs on Daphnia magna, Scenedesmus sp. and Danio rerio was tested. The degradation results suggested that only iopamidol was significantly degraded (level of degradation >98%) by chlorination, and the degradation rate of iohexol and diatrizoate were significantly increased in chlorination with NH₄⁺. All three ICM were not degraded in peracetic acid. The toxicity analysis results indicate that only the disinfected water of iopamidol and iohexol by chlorination with NH₄⁺ were toxic to at least one aquatic organism. These results highlighted that the potential ecological risk of ICM-contained medical wastewater by chlorination with NH₄⁺ should not be neglected, and peracetic acid may be an environment-friendly alternative for the disinfection of wastewater containing ICM.

Transformation of dissolved organic matter during UV/peracetic acid treatment

Peracetic acid combined ultraviolet (UV/PAA) process has garnered growing attention as a promising advanced oxidation process (AOP) for wastewater treatment, but the corresponding transformation of ubiquitous dissolved organic matter (DOM) under this AOP remains unknown. This study systematically investigated the changes in characteristics and composition of DOM under UV/PAA, as well as the underlying mechanisms by multiple spectroscopic analyses and Fourier transform ion cyclotron resonance mass spectrometry. UV/PAA treatment dramatically decreased aromaticity, apparent molecular weight, and fluorescent abundance of DOM with the production of more oxidized and saturated compounds. The reactive species (i.e., ^·OH and CH₃C(O)O^·/CH₃C(O)OO^·) in UV/PAA contributed primarily to DOM changes but showed different reaction selectivity and mechanisms. ^·OH reacts with DOM components and mainly yields oxygenation products via a radical addition pathway. Comparatively, the electron transfer route is more likely to occur in CH₃C(O)O^·/CH₃C(O)OO^·-induced DOM transformation. Aside from oxygenation products, electron transfer could exclusively generate decarboxylation products and distinguishes CH₃C(O)O^·/CH₃C(O)OO^·-based AOPs from ^·OH-based AOPs. These findings significantly improve knowledge of DOM alterations under UV/PAA AOP at both the bulk and molecular levels.

Degradation of β-N-methylamino-l-alanine (BMAA) by UV/peracetic acid system: Influencing factors, degradation mechanism and DBP formation

β-N-methylamino-l-alanine (BMAA) is a cyanobacterial neurotoxin associated with human neurodegenerative diseases, and its removal in drinking water is receiving increasing attention. In this study, the degradation of BMAA in UV/peracetic acid (UV/PAA) system was investigated. BMAA degradation followed the pseudo-first-order kinetic model. The synergistic effect of UV and PAA exhibited a great potential for BMAA degradation, which was attributed to the generation of a large number of reactive radicals, of which R-C^• was the most dominant contributor. We also explored the effects of different factors on BMAA degradation. The results showed that there was a positive correlation between BMAA degradation and PAA dosage, and the optimal effect was achieved at pH 7. Notably, the existence of water matrices such as bicarbonate (HCO₃－), chloride ion (Cl－), humic acid (HA) and algal intracellular organic matter (IOM) all inhibited the degradation of BMAA. Based on the identified intermediates, this study suggested that reactive radicals degraded BMAA mainly by attacking the carbon-nitrogen bonds on BMAA. Besides, comparing the effect of Cl－ on disinfection byproduct (DBP) formation in UV/PAA-post-PAA oxidation and UV/chlorine-post-chlorination systems, it was found that the former was more sensitive to the presence of Cl－.

Activated peracetic acid by Mn3O4 for sulfamethoxazole degradation: A novel heterogeneous advanced oxidation process

In this study, a novel peracetic acid (PAA)-based advanced oxidation process using Mn₃O₄ as a catalyst was proposed. A thorough sulfamethoxazole (SMX) removal could be achieved within 12 min in Mn₃O₄/PAA system at neutral pH. The characterization results of fresh and used Mn₃O₄ suggested that ≡Mn(II), ≡Mn(III) and ≡Mn(IV) on Mn₃O₄ were the Mn species for PAA activation, constituting the redox cycles of ≡Mn(II)/≡Mn(III) and ≡Mn(III)/≡Mn(IV) simultaneously. Organic radicals (i.e., CH₃C(O)O^• and CH₃C(O)OO^•) were verified to be the dominant reactive species responsible for SMX degradation in Mn₃O₄/PAA system by radical scavenging experiments. The neutral condition was the most favorable pH for SMX removal in Mn₃O₄/PAA system and the increase of PAA or Mn₃O₄ dosage could enhance SMX degradation. Presence of HCO₃^- and natural organic matter (NOM) could inhibit SMX degradation, while Cl^-, NO₃^- and SO₄^2- had a negligible effect on SMX removal. The thorough SMX removal in successive experiments and characterization results of used Mn₃O₄ suggested the good reusability and stability of Mn₃O₄ for PAA activation. Based on six detected transformation products of SMX, hydroxylation, nitration, bond cleavage and coupling reaction were proposed to be its degradation pathways in Mn₃O₄/PAA system.

Fe-biochar as a safe and efficient catalyst to activate peracetic acid for the removal of the acid orange dye from water

Pollution of wastewater and natural waters by organic contaminants is a major health issue, yet actual remediation methods are limited by incomplete removal of recalcitrant contaminants and by secondary pollution by chlorinated contaminants and catalytic metals. To attempt to solve these issues, we tested the removal of acid orange by peracetic acid (PAA), a safe oxidant, activated by Fe-biochar that iron anchored on biochar to prevent secondary pollution by iron. Fe-biochar was synthesized using a simple, one-step pyrolysis method. We investigated the effects of PAA concentration, pH, humic acids, chloride, bicarbonate on the reaction. Radical quenching and electron paramagnetic resonance were used to identify reacting species. Results showed that the granulous structure of Fe-biochar and the presence of Fe, Fe₃O₄, Fe₂O₃, and Fe₃C on Fe-biochar surface. The highest removal of acid orange of 99.9% was obtained with 1.144 mM PAA and 0.3 g/L Fe-biochar at pH 7. Acid orange removal increases with Fe-biochar dose, decreases with pH, is slightly inhibited by humic acids and bicarbonate, and is not modified by chloride. Our experimental results suggested that CH₃C(O)OO· and CH₃C(O)O· are the main radical species, but there may also be non-radical effects in Fe-biochar/PAA process. Fe-biochar displayed high re-usability, with 92.8% removal after five uses.

Unraveling the behavior of nitrite on promoting short-chain fatty acids accumulation from waste activated sludge by peracetic acid pretreatment: Extracellular polymeric substance decomposition and underlying mechanism

Peracetic acid (PAA) is an emerging oxidant for waste activated sludge (WAS) treatment due to its strong oxidization and few toxic byproducts. Nitrite which can be in-situ recovered from WAS fermentation liquor, its protonated form (free nitrous acid, FNA) is regarded as the cost-effective inactivator. The stubborn extracellular polymeric substance (EPS) is the rate-limiting step for energy/resource recovery from WAS. This work found that the co-pretreatment of PAA and FNA can effectively promote short-chain fatty acids (SCFAs) production during anaerobic fermentation. Higher PAA dosage (100 mg/g VSS, FP4WAS) in co-pretreatment was beneficial for organics release (1976.9 mg COD/L), remarkably increased by 10.3- 96.5 % than that of low PAA dosage (25- 75 mg/g VSS), and promoted by 105.1 % and 62.1 % than FNA (FWAS)/PAA (100 mg/g VSS, P4WAS)-pretreated WAS. Effective release of soluble organics contributed to the SCFAs accumulation (7679 ± 86 mg COD/L, 4 d), enhanced by 200.0 % and 19.0 % than FWAS and P4WAS, respectively. Acetic (HAc) and propionic acid (HPr) peaked at 6344.7 mg COD/L in FP4WAS (accounted for 82.6 %), which increased by 10.6- 899.0 % than other groups. Moreover, OH and O₂^- were detected in co-pretreatment, may play the synchronous effect with the crucial intermediates of NO, NO₂ and ONOO^-/ONOOH on EPS decomposition.

Oxidation of organic micropollutant surrogate functional groups with peracetic acid activated by aqueous Co(II), Cu(II), or Ag(I) and geopolymer-supported Co(II)

Peracetic acid (PAA) in combination with transition metals has recently gained increasing attention for organic micropollutant abatement. In this study, aqueous Co(II), Cu(II), and Ag(I) were compared for their capacity to activate PAA. Co(II) outperformed Cu(II) or Ag(I) and the optimum conditions were 0.05 mM of Co(II), 0.4 mM of PAA, and pH 3. However, due to a wider applicability in water treatment, pH 7 (i.e., bicarbonate buffer) was selected for detailed investigations. The abatement of different micropollutant surrogates could be described with a second-order rate equation (observed second-order rate constants, k_obs were in the range of 42-132 M^-1 s^-1). For the para-substituted phenols, there was a correlation between the observed second-order rate constants of the corresponding phenolates and the Hammett constants (R² = 0.949). In all oxidation experiments, the reaction rate decreased significantly after 1-2 min, which coincided with the depletion of PAA but also with the deactivation of the Co(II) catalyst by oxidation to Co(III) and subsequent precipitation. It was demonstrated that Co(II) immobilized on a geopolymer-foam performed approximately similarly as aqueous Co(II) but without deactivation due to Co(III) precipitation. This provides a potential option for the further development of heterogeneous catalytic Co(II)/PAA advanced oxidation processes utilizing geopolymers as a catalyst support material.

Review of Advanced Oxidation Processes Based on Peracetic Acid for Organic Pollutants

In recent years, the removal of organic pollutants from water and wastewater has attracted more attention to different advanced oxidation processes (AOPs). There has been increasing interest in using peroxyacetic acid (PAA), an emerging oxidant with low or no toxic by-products, yet the promotion and application are limited by unclear activation mechanisms and complex preparation processes. This paper synthesized the related research results reported on the removal of organic pollutants by PAA-based AOPs. Based on the research of others, this paper not only introduced the preparation method and characteristics of PAA but also summarized the mechanism and reactivity of PAA activated by the free radical pathway and discussed the main influencing factors. Furthermore, the principle and application of the newly discovered methods of non-radical activation of PAA in recent years were also reviewed for the first time. Finally, the shortcomings and development of PAA-based AOPs were discussed and prospected. This review provides a reference for the development of activated PAA technology that can be practically applied to the treatment of organic pollutants in water.

Evaluation of Fe2+/Peracetic Acid to Degrade Three Typical Refractory Pollutants of Textile Wastewater

In this work, the degradation performance of Fe2+/PAA/H2O2 on three typical pollutants (reactive black 5, ANL, and PVA) in textile wastewater was investigated in comparison with Fe2+/H2O2. Therein, Fe2+/PAA/H2O2 had a high removal on RB5 (99%) mainly owing to the contribution of peroxyl radicals and/or Fe(IV). Fe2+/H2O2 showed a relatively high removal on PVA (28%) mainly resulting from ·OH. Fe2+/PAA/H2O2 and Fe2+/H2O2 showed comparative removals on ANL. Additionally, Fe2+/PAA/H2O2 was more sensitive to pH than Fe2+/H2O2. The coexisting anions (20–2000 mg/L) showed inhibition on their removals and followed an order of HCO3− > SO42− > Cl−. Humic acid (5 and 10 mg C/L) posed notable inhibition on their removals following an order of reactive black 5 (RB5) > ANL > PVA. In practical wastewater effluent, PVA removal was dramatically inhibited by 88%. Bioluminescent bacteria test results suggested that the toxicity of Fe2+/PAA/H2O2 treated systems was lower than that of Fe2+/H2O2. RB5 degradation had three possible pathways with the proposed mechanisms of hydroxylation, dehydrogenation, and demethylation. The results may favor the performance evaluation of Fe2+/PAA/H2O2 in the advanced treatment of textile wastewater.

Efficient activation of PAA by FeS for fast removal of pharmaceuticals: The dual role of sulfur species in regulating the reactive oxidized species

As peracetic acid (PAA) is being increasingly used as an alternative disinfectant, efficient activation of PAA by low-cost and environmentally friendly catalysts over a wide pH range is potentially useful for simultaneous sterilization and pharmaceutical degradation in wastewater, such as hospital wastewater. In this study, peracetic acid (PAA) was successfully activated by low-cost and environmental-friendly FeS (25 mg/L) for efficient oxidative removal of three pharmaceuticals over a wide pH range (3.0∼9.0) as indicated by 80∼100% removal rate within 5 min. As expected, Fe(II) rather than sulfur species was the primary reactive site for PAA activation, while unlike the homogeneous Fe²⁺/PAA system with organic radicals (R-O·) and ·OH as the dominant reactive oxidized species (ROS), ·OH is the key reactive species in the FeS/PAA system. Interestingly and surprisingly, in-depth investigation revealed the dual role of sulfur species in regulating the reactive oxidized species: (1) S(-II) and its conversion product H₂S (aq) played a significant role in Fe(II) regeneration with a result of accelerated PAA activation; (2) however, the R-O· generated in the initial seconds of the FeS/PAA process was supposed to be quickly consumed by sulfur species, resulting in ·OH as the dominant ROS over the whole process. The selective reaction of sulfur species with R-O· instead of ·OH was supported by the obviously lower Gibbs free energy of CH₃COO· and sulfur species than ·OH, suggesting the preference of CH₃COO· to react with sulfur species with electron transfer. After treatment with the FeS/PAA system, the products obtained from the three pharmaceuticals were detoxified and even facilitated the growth of E. coli probably due to the supply of numerous carbon sources by activated PAA. This study significantly advances the understanding of the reaction between PAA and sulfur-containing catalysts and suggests the practical application potential of the FeS/PAA process combined with biotreatment processes.

Mode of Application of Peracetic Acid-Based Disinfectants has a Minimal Influence on the Antioxidant Defences and Mucosal Structures of Atlantic Salmon (Salmo salar) Parr

Peracetic acid (PAA) is an oxidative disinfectant with a broad spectrum of antimicrobial activity and low environmental impact. In this study, we investigated the physiological impacts of PAA application in Atlantic salmon (Salmo salar) parr reared in freshwater recirculating aquaculture systems over a 4-week period. PAA at a target concentration of 1 mg/L was administered either in pulse (every 3 days) or continuous. The group that did not receive PAA served as a control. Fish tissue samples were collected for histology, gene expression, and biochemical analyses at day 0 and after 2 and 4 weeks of exposure. The expression of genes encoding for antioxidant defence in the olfactory organs, skin, and gills changed during the trial, but the temporal effects were more pronounced than inter-treatment impacts. The glutathione group of antioxidant genes was more responsive to PAA. In most cases, an upregulation was observed. Significantly lower levels of reactive oxygen species were identified in the plasma and skin mucus of the two PAA-exposed groups at week 4; nonetheless, significantly increased levels of total antioxidant capacity were only observed in the skin mucus of fish from the continuous treatment group. Additional markers of oxidative stress (i.e., 8-oxo-2'-deoxyguanosine and o,o'-dityrosine) were analysed in the skin, gills, liver, and dorsal fins. These markers were unaffected by the two PAA treatments. Sporadic reversible structural alterations were observed in the three mucosal organs; the changes were time-dependent, and the effects of PAA treatment were minimal. The number of mucous cells varied over time but not within treatments except in the skin of the pulse group at week 4 where a reduction was observed. The ratio of acidic and neutral mucous cells in the skin and gills were affected by PAA treatments especially in the pulse group. Overall, this study revealed that Atlantic salmon parr mobilised mucosal and systemic antioxidant defences against the oxidative disinfectant PAA, but it was evident that the mode of application did not impose a strong influence. The minimal effects of PAA application on the indicators of health and welfare underscore the potential use of PAA as a routine disinfectant in recirculating aquaculture systems.

Formation of Halogenated Byproducts upon Water Treatment with Peracetic Acid

Peracetic acid has quickly gained ground in water treatment over the last decade. Specifically, its disinfection efficacy toward a wide spectrum of microorganisms in wastewater is accompanied by the simplicity of its handling and use. Moreover, peracetic acid represents a promising option to achieve disinfection while reducing the concentration of typical chlorination byproducts in the final effluent. However, its chemical behavior is still amply debated. In this study, the reactivity of peracetic acid in the presence of halides, namely, chloride and bromide, was investigated in both synthetic waters and in a real contaminated water. While previous studies focused on the ability of this disinfectant to form halogenated byproducts in the presence of dissolved organic matter and halides, this work indicates that peracetic acid also contributes itself as a primary source in the formation of these potentially carcinogenic compounds. Specifically, this study suggests that 1.5 mM peracetic acid may form around 1-10 μg/L of bromoform when bromide is present. Bromoform formation reaches a maximum at near neutral pH, which is highly relevant for wastewater management.

Oxidation of pyrazolone pharmaceuticals by peracetic acid: Kinetics, mechanism and genetic toxicity variations

Peracetic acid (PAA) oxidation is an emerging technology in water disinfection and purification. This study evaluated the oxidation of three pyrazolone pharmaceuticals (i.e., Aminopyrine (AMP), Antipyrine (ANT), and Isopropylphenazone (PRP) by PAA. Experimental results showed that PAA exhibited structure selectivity to the above three pharmaceuticals and oxidized AMP with the highest reactivity. The degradation kinetics of AMP was investigated by calculating the apparent second-order rate constants (k_app) under different initial pH. Through kinetic simulation, the second-order rate constants of elementary reactions between AMP (i.e., neutral (AMP⁰) and protonated (AMP⁺) species) with PAA (i.e., neutral (PAA⁰) and anionic (PAA^-) species) were obtained to be 0.34 ± 0.077 M^-1 s^-1(k"_{AMP+, PAA0}), 0.89 ± 0.091 M^-1 s^-1(k"_{AMP0, PAA-}) and 5.94 ± 0.142 M^-1 s^-1(k"_{AMP0, PAA0}), respectively. The PAA could oxidize AMP via electrophilic attack, and the degradation site of AMP was confirmed to be the central nitrogen of -N(CH₃)₂ with the highest relative electrophilicity (s_k^-/s_k⁺, 48.8614) by Density Functional Theory (DFT) calculation. The intermediates/products of AMP degradation were identified by high-performance liquid chromatography-mass spectrometry (LC-MS/MS), and the transformation pathways of AMP during PAA oxidation were inferred to be hydroxylation, demethylation, and CC cleavage. The genetic toxicity of AMP contaminated water could be reduced after PAA oxidation, which was evaluated by the micronucleus test of Vicia faba root tips.

Transformation of bromide and formation of brominated disinfection byproducts in peracetic acid oxidation of phenol

Peracetic acid (PAA) has attracted increasing attention in wastewater treatment as a disinfectant. However, the transformation of bromide (Br^-) during PAA oxidation of bromide-containing wastewater has not been fully explored. This study showed that Br^- could be oxidized by PAA to free bromine which reacted with phenol to form organic bromine. At pH 7.0, more than 35.2% inorganic Br^- was converted to organic bromines in 4 h. At acidic conditions, the conversion ratio was even higher, reaching 69.9% at pH 2.8. Most of the organic bromines were presented as bromophenols (i.e., 2-bromophenol, 4-bromophenol, and 2,4-dibromophenol), while regulated brominated disinfection byproducts (Br-DBPs, i.e., bromoform and bromoacetic acids) only accounted for a tiny fraction of total organic bromine. Similar results were observed when PAA was applied to natural organic matter (NOM) or wastewater in presence of Br^-. The organic bromine yield reached 56.6 μM in the solution containing 0.1 mM Br^- and 2 mg/L NOM initially. Among them, only 1.00 μM bromoform and 0.16 μM dibromoacetic acid were found. Similarly, regulated Br-DBPs only accounted for 28.3% of the organic bromine in a real wastewater effluent treated with PAA. All these data show that monitoring regulated DBPs cannot fully indicate the potential environmental risk of the application of PAA to wastewater.

Aquatic toxicity and aquatic ecological risk assessment of wastewater-derived halogenated phenolic disinfection byproducts

Increasing number of wastewater-derived aliphatic and phenolic disinfection byproducts (DBPs) were discharged into aquatic environment with the discharge of disinfected wastewater. However, the currently available aquatic toxicity data and the aquatic ecological risk information of them are limited, especially for wastewater-derived phenolic DBPs. In this study, we investigated the acute toxicity of 7 phenolic DBPs that selected from the typical five groups of phenolic DBPs (2,4,6-trihalo-phenols, 2,6-dihalo-4-nitrophenols, 3,5-dihalo-4-hydroxybenzaldehydes, 3,5-dihalo-4-hydroxybenzoic acids and halo-salicylic acids) and 4 aliphatic DBPs to Gobiocypris rarus and also assessed their potential aquatic ecological risk. Experimental results indicated that the half lethal concentration (LC₅₀) values of 2,4,6-trihalo-phenols and 2,6-dihalo-4-nitrophenols ranged from 1 to 10 mg/L; While that of 3,5-dihalo-4-hydroxybenzaldehydes was between 10 and 100 mg/L, and 3,5-dihalo-4-hydroxybenzoic acids and halo-salicylic acids was >100 mg/L. The toxicity mode of action (MOA) identification results from three methods suggested that no clear and consistent MOA were obtained for those 11 DBPs currently. The species-specific aquatic toxicity analysis results highlighted that no aquatic species would be considered as the most sensitive species for all 11 DBPs. However, crustacean and fish were more sensitive than that of algae for most of tested compounds. Lastly, the aquatic ecological risk assessment results of those 11 DBPs revealed that all 7 phenolic and 2 aliphatic DBPs (2-bromoacetamide and bromodichloromethane) had low aquatic ecological risk, while dichloroacetic acid and dibromoacetonitrile had high aquatic ecological risk. The low environmental concentration was the main reason why high toxic phenolic DBPs (2,4,6-trihalo-phenols and 2,6-dihalo-4-nitrophenols) exhibited low ecological risk. Their ecological risk may increase with the increases of corresponding environmental concentration. Thus, more efforts should be made to determine other potential harmful effects of those high toxic phenolic DBPs and to minimize their potential ecological risk by taking appropriate measures.

Health Effect of N-Nitroso Diethylamine in Treated Water on Gut Microbiota Using a Simulated Human Intestinal Microbiota System

Chlorination disinfection byproducts (CDBPs) can exert adverse human health effects. Many toxicology-based studies confirmed the health hazards of CDBPs, but little research has been done on gut microbiome. We explored the effect of CDBPs on intestinal microbiota in the Simulator of the Human Intestinal Microbial Ecosystem (SHIME). The results showed that CDBPs slightly inhibited the production of short-chain fatty acids, and the abundance of Actinobacteria decreased in the transverse colon and descending colon. The abundance of Proteobacteria increased in the ascending colon and descending colon, while it decreased in the transverse colon. The abundance of Firmicutes decreased in both the ascending colon and descending colon. In particular, the abundance of Lachnospiraceae members, Bilophila, Oscillospira, Parabacteroides, Desulfovibrio, and Roseburia increased in the ascending colon, while the abundance of Sutterella, Bacteroides, Escherichia, Phascolarctobacterium, Clostridium, Citrobacter, and Klebsiella increased in the descending colon. The Shannon index differed significantly in both the ascending colon and descending colon before and after exposure. Overall, we demonstrate the feasibility of applying the SHIME model to studying the effects of intestinal toxicity on health of chlorinated by-products. The findings of this study improve our understanding of the health impact of CDBPs on the intestinal microbiota and better control of CDBPs in treated water is recommended.

Strategies for mitigating chlorinated disinfection byproducts in wastewater treatment plants

A case study of 15 wastewater treatment plants (WWTPs) at a full-scale was assessed for the risks of disinfection byproduct (DBP) formation, mainly the regulated trihalomethanes (THMs) and haloacetic acids (HAAs) and chlorate as an inorganic byproduct regulated recently in the EU. Raw wastewater from large, medium/small urban areas were treated with single or combined disinfection processes (i.e., chlorine, peracetic acid (PAA) and ultraviolet (UV) radiation). Sampling was executed once a month over seven months for the medium/small WWTPs and twice a month for the large ones. Due to the potential risk of SARS-CoV-2 contaminated wastewater, several inactivation methods were examined before the DBP analysis. Due to the inactivation step, the stability of THM4 and HAA9 suffered reductions, monitoring their presence only in the effluents after the disinfection treatments. In contrast, chlorate levels remained unchanged after the inactivation treatment; thus both raw wastewater and effluents were examined for their occurrence before disinfection treatments. Results showed that chlorate residues in the raw wastewater varied greatly from undetected levels to as high as 42.2 mg L^-1. As the continuous monitoring of DBPs was performed, a positive correlation with chlorine or chlorine/UV was found. Changes in the physicochemical parameters indicated that the quality of the raw wastewater varied considerably depending on the WWTPs, and it influenced byproduct formation. In all WWTPs, chlorine alone or combined with UV significantly increased the presence of THMs, HAAs, and chlorate levels in the treated effluents. When the same WWTPs changed to PAA or PAA/UV, DBPs were diminished completely. This study highlights the risk of chlorate residues in raw wastewater during the pandemic. It also showed how the chemical risks of DBP formation could be reduced by changing the chlorinated disinfection technologies to PAA or PAA/UV, particularly if reclaimed water is intended for agricultural irrigation to minimize DBP residues.

Degradation of steroid estrogens by UV/peracetic acid: Influencing factors, free radical contribution and toxicity analysis

Steroid estrogens (SEs) are a group of refractory organic micropollutants detected in secondary effluent frequently. The advanced oxidation processes (AOPs) are usually used to deep remove the SEs from the secondary effluent. Herein, we first investigated the UV/peracetic acid (PAA), a PAA-based AOP, to degrade SEs. Using estrone (E1), 17β-estradiol (E2), estriol (E3), and 17α-ethinyl estradiol (EE2) as representatives, the results showed that UV can effectively activate PAA to enhance the degradation of the four SEs, which degradation followed the pseudo-first-order kinetics (R² > 0.99), and the rate constant (k_obs) of degradation increased with increasing the PAA dosage in the range investigated. Little pH dependence was also observed in the degradation of SEs by UV/PAA. Furthermore, the degradation of SEs was improved in the presence of coexisting substrates (Cl^-, HCO- 3, NO- 3, and HA) in relatively low concentrations. Quenching experiments revealed that the carbon-centered radicals (R-C•) produced from the UV/PAA process were recognized as the predominant contributors to the degradation of the four SEs. Also, we found that the estrogenic activity decreased by more than 94%, but the acute toxicity inhibition increased to 37% in the solution after 30 min UV/PAA treatment. In addition, the 130% additional total organic carbon (TOC) was generated after UV/PAA process. These findings obtained in this work will facilitate the development of the UV/PAA process as a promising strategy for the deep removal of SEs in secondary effluent.

Comparative analysis of peracetic acid (PAA) and permaleic acid (PMA) in disinfection processes

The growing demand to reduce chlorine usage and control disinfection byproducts increased the development of new strategies in wastewater treatments. Organic peracids are increasingly attracting interest in disinfection activities as a promising alternative to chlorine and chlorine-based agents. In this study, we assessed the antimicrobial properties against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) of a new organic peracid, permaleic acid (PMA) compared with the reference peracetic acid (PAA). Disinfectant properties were evaluated by i) disk diffusion agar, ii) broth microdilution, iii) antibiofilm properties. PMA demonstrated a 10- and 5-fold decrease in the microbial inhibitory concentration (MIC) value against E. coli and S. aureus respectively, compared to PAA. Results showed greater efficacy of PMA regarding wastewater (WW) and treated wastewater (TWW) disinfection at low concentrations. Furthermore, the biofilm degradation ability was only observed following PMA treatment, for both strains. Bacterial regrowth from biofilm matrix after PAA and PMA disinfection, in the absence and presence of organic matter, was evaluated. PMA was more efficient than PAA to prevent the regrowth of planktonic cells of S. aureus and E. coli. After PAA and PMA treatment, in the presence of organic matter, the bacterial regrowth inhibition was maintained up to 10 and 5 g/L, respectively. Based on these results, PMA could be used as a valid alternative to the currently used disinfection methods.

A novel risk score-based prioritization method for pollutants in reclaimed water

Wastewater reclamation and reuse is a sustainable solution for alleviating the scarcity of water resources. However, the potential risks resulting from the residual pollutants in reclaimed water are of concern. Identifying of priority pollutants would be a practical approach for the management and scientific evaluation of risks associated with reclaimed water reuse. In this study, a novel risk score-based method is proposed for prioritizing residual pollutants in reclaimed water. First, target the specific applications and possible scenarios of reclaimed water as well as recognize the potential receptors and exposure pathways. Second, determine exposure and effect parameters, and assign values to every parameter. Third, calculate the total exposure score and effect score for each pollutant using a weighted method, then calculate the risk score by multiplying total exposure score and effect score, and rank all pollutants based on their risk scores from high to low. Fourth, recommend a priority pollutants list for reclaimed water reuse. To demonstrate the procedure and validate the method, a case study on groundwater recharge with reclaimed water was conducted. In the case study, EE2 and E2, which have also been listed in other recent water quality standards, were identified as priority pollutants. The case study illustrated sufficient reliability, great discrimination and feasibility of the method. The five exposure parameters and seven effect parameters in this method can objectively evaluate the potential risk of pollutants and identify priority pollutants for the specific application of reclaimed water. This application-oriented and risk-based prioritization method is easy to understand and simple to operate in practice. This study fills existing gaps by proffering a novel prioritization method to identify priority pollutants in reclaimed water for an accurate evaluation and safety management of recycled wastewater.

Simultaneous inactivation of multidrug-resistant Escherichia coli and enterococci by peracetic acid in urban wastewater: Exposure-based kinetics and comparison with chlorine

The presence of antibiotic resistance in wastewater sparked a great interest in investigating the inactivation of antibiotic-resistant bacteria by disinfecting agents. In this study, the inactivation kinetics of multidrug-resistant E. coli and enterococci by an emerging environmentally-friendly disinfectant, peracetic acid (PAA), in wastewater and phosphate buffer at pH 6.5 and pH 7.5, were characterized. It was demonstrated that the inactivation of the studied multidrug-resistant bacteria was governed by their exposure to PAA, i.e., integral of the PAA concentration over time (integral CT or ICT). Both regimes of the PAA inactivation of bacteria, i.e., initial resistance followed by a faster inactivation, were described well by an ICT-based Chick-Watson inactivation kinetic model. In wastewater at pH 7.5, the model-predicted ICT requirements showed that the multidrug-resistant enterococci were less susceptible to PAA than E. coli, e.g., to achieve a 3-log reduction, an ICT of 32.7 mg min/L and 23.4 mg min/L was needed, respectively. No regrowth of the studied bacteria was observed after 72 h from PAA disinfection at 25 ± 1 °C. Soluble constituents of wastewater decreased the PAA inactivation of both multidrug-resistant bacteria, i.e., higher inactivation was observed in phosphate buffer than wastewater at the same pH of 7.5. In phosphate buffer, a lower pH of 6.5 resulted in higher inactivation of multidrug-resistant E. coli compared with pH 7.5, but it did not affect the PAA inactivation of multidrug-resistant enterococci. A comparison with the most commonly used chemical disinfectant, chlorine, showed higher inactivation of both multidrug-resistant bacteria by chlorine and higher chlorine decay than PAA. The results of the present study may have implications in designing a PAA disinfection process, aiming at controlling antibiotic resistance, in terms of selecting a suitable fecal indicator and optimizing disinfectant dosing.

Acetaminophen degradation by hydroxyl and organic radicals in the peracetic acid-based advanced oxidation processes: Theoretical calculation and toxicity assessment

The research on the mechanisms and kinetics of radical oxidation in peracetic acid-based advanced oxidation processes was relatively limited. In this work, HO^• and organic radicals mediated reactions of acetaminophen (ACT) were investigated, and the reactivities of important organic radicals (CH₃COO^• and CH₃COOO^•) were calculated. The results showed that initiated reaction rate constants of ACT are in the order: CH₃COO^• (5.44 × 10¹⁰ M^-1 s^-1) > HO^• (7.07 × 10⁹ M^-1 s^-1) > CH₃O^{• (}1.57 × 10⁷ M^-1 s^-1) > CH₃COOO^• (3.65 × 10⁵ M^-1 s^-1) >> ^•CH₃ (5.17 × 10² M^-1 s^-1) > CH₃C^•O (1.17 × 10² M^-1 s^-1) > CH₃OO^• (11.80 M^-1 s^-1). HO^•, CH₃COO^• and CH₃COOO^• play important roles in ACT degradation. CH₃COO^• is another important radical in the hydroxylation of aromatic compounds in addition to HO^•. Reaction rate constants of CH₃COO^• and aromatic compounds are 1.40 × 10⁶ - 6.25 × 10¹⁰ M^-1 s^-1 with addition as the dominant pathway. CH₃COOO^• has high reactivity to phenolate and aniline only among the studied aromatic compounds, and it was more selective than CH₃COO^•. CH₃COO^•-mediated hydroxylation of aromatic compounds could produce their hydroxylated products with higher toxicity.

Peracetic Acid-Ruthenium(III) Oxidation Process for the Degradation of Micropollutants in Water

This paper presents an advanced oxidation process (AOP) of peracetic acid (PAA) and ruthenium(III) (Ru(III)) to oxidize micropollutants in water. Studies of PAA-Ru(III) oxidation of sulfamethoxazole (SMX), a sulfonamide antibiotic, in 0.5-20.0 mM phosphate solution at different pH values (5.0-9.0) showed an optimum pH of 7.0 with a complete transformation of SMX in 2.0 min. At pH 7.0, other metal ions (i.e., Fe(II), Fe(III), Mn(II), Mn(III), Co(II), Cu(II), and Ni(II)) in 10 mM phosphate could activate PAA to oxidize SMX only up to 20%. The PAA-Ru(III) oxidation process was also unaffected by the presence of chloride and carbonate ions in solution. Electron paramagnetic resonance (EPR) measurements and quenching experiments showed the dominant involvement of the acetyl(per)oxyl radicals (i.e., CH₃C(O)O^• and CH₃C(O)OO^•) for degrading SMX in the PAA-Ru(III) oxidation process. The transformation pathways of SMX by PAA-Ru(III) were proposed based on the identified intermediates. Tests with other pharmaceuticals demonstrated that the PAA-Ru(III) oxidation system could remove efficiently a wide range of pharmaceuticals (9 compounds) in the presence of phosphate ions in 2.0 min at neutral pH. The knowledge gained herein on the effective role of Ru(III) to activate PAA to oxidize micropollutants may aid in developing Ru(III)-containing catalysts for PAA-based AOPs.

Biogas Production from Excess Sludge Oxidized with Peracetic Acid (PAA)

Human functioning related to living and economic activity involves generating an increasing amount of sewage and sludge, which needs to be subjected to advanced processes of treatment, neutralization, and management. The deterioration in the susceptibility of excess sludge to biochemical decomposition observed under anaerobic conditions leads to the development and application of highly effective methods of wastewater treatment based on the removal of biogenic compounds using activated sludge, with a high degree of sludge thickening obtained in mechanical facilities. The concentration of volatile fatty acids, being an important intermediate product of anaerobic stabilization, directly determines biogas production efficiency. This study aimed to determine the effect of chemical disintegration with peracetic acid on biogas production efficiency using methane fermentation of pretreated sludge. Intensification of the hydrolysis phase is an important determinant of the efficiency of biochemical sludge decomposition under anaerobic conditions. The association of excess sludge oxidation, initiated by peracetic acid with biological hydrolysis, which is the first phase of methane fermentation, led to an increase in sludge digestion degree and biogas production efficiency. The compound of STERIDIAL W-10, which is an aqueous solution of 10% peracetic acid, 10% acetic acid, and 8% hydrogen peroxide, was used. The disintegration of excess sludge with a reactant dose of 3.0 mL of STERIDIAL W-10/L yielded a specific biogas production of 0.52 L/g VSS and a 74% degree of sludge digestion.

Back to Basics: Choosing the Appropriate Surface Disinfectant

From viruses to bacteria, our lives are filled with exposure to germs. In built environments, exposure to infectious microorganisms and their byproducts is clearly linked to human health. In the last year, public health emergency surrounding the COVID-19 pandemic stressed the importance of having good biosafety measures and practices. To prevent infection from spreading and to maintain the barrier, disinfection and hygiene habits are crucial, especially when the microorganism can persist and survive on surfaces. Contaminated surfaces are called fomites and on them, microorganisms can survive even for months. As a consequence, fomites serve as a second reservoir and transfer pathogens between hosts. The knowledge of microorganisms, type of surface, and antimicrobial agent is fundamental to develop the best approach to sanitize fomites and to obtain good disinfection levels. Hence, this review has the purpose to briefly describe the organisms, the kind of risk associated with them, and the main classes of antimicrobials for surfaces, to help choose the right approach to prevent exposure to pathogens.

Circular Economy in Conjunction with Treatment Methodologies in the Biomedical and Dental Waste Sectors

In this review, life cycle assessment (LCA) principles are coupled with circular economy (CE) in order to address LCA examples in the biomedical sector worldwide. The objectives were (1) to explore the application of LCA in the medical, pharmaceutical, and dental fields; (2) to describe the ways of biomedical waste management; (3) to emphasize on the problem of dental waste in private and public dental sectors; and (4) to propose ways of “green circulation” of the dental waste. A literature search was performed using the Google Scholar, PubMed, and Scopus search engines covering the period from January 2000 until May 2020, corresponding to articles investigating the LCA and circular economy principles and legislation for biomedical and dental waste, their management options, and modern ways of recycling. The results showed that incineration seems to be the best management way option involved despite the mentioned drawbacks in this technology. Different adopted models are well defined for the dental field based on the 3Rs’ module (reduce, reuse, recycle). Replacing disposable products with reusable ones seems to be a good way to tackle the problem of waste in medical and dental sectors. Interventions on the selection and better biomedical and dental waste management will ensure eco-medicine and eco-dentistry of the future. These new terms should be the new philosophies that will change the way these fields operate in the future for the benefit of the professionals/patients and the community.

Evaluation of the effectiveness, safety, and feasibility of 9 potential biocides to disinfect acidic landfill leachate from algae and bacteria

This study evaluates 9 biocides as disinfectants against microbiological contaminants, specifically, microalgae and E. coli, while assessing their safety and environmental impact. Specifically, the biocide effectiveness and corresponding generation of halogenated compounds is assessed in a real contaminated groundwater receiving acidic leachate from a phosphogypsum landfill. Oxidizing agents are investigated, namely, hypochlorite, peracetic acid, hydrogen peroxide, chlorine dioxide, and persulfate, together with electrophilic biocides, namely, 2,2-dibromo-2-cyanoacetamide and (chloro-) methylisothiazolinone. In addition, a novel disinfection approach is assessed by applying reducing agents, namely, sulfite and metabisulfite. The disinfection mechanism and the formation of halogenated compounds are discussed on the basis of the mode of action and of the molecular structure of each biocide. Overall, the results show that an optimal dosage of the biocides exists to minimize the formation of harmful compounds in water while maximizing disinfection, especially for hypochlorite and peracetic acid. This dosage was between 0.03 mM and 0.15 mM depending on the biocide. The safety of electrophilic biocides is found to be associated to their molecular structure rather than their mode of action. Hydrogen peroxide, MIT, and metabisulfite are the most promising disinfectants in the contaminated groundwater matrix of interest since no halogenated by-products are detected upon successful disinfection, while they are able to completely inactivate bacteria and remove over the 80% of microalgae in the selected matrix. In particular, metabisulfite represents a highly promising biocide, owing to its low environmental and health impacts, as well as economic feasibility (estimated reagent cost ~0.002 € per cubic meter of treated water).