A biomimetic SiO2@chitosan composite as highly-efficient adsorbent for removing heavy metal ions in drinking water

Synthesis of metal-organic frameworks with multiple nitrogen groups for selective capturing Ag(I) from wastewater

As a noble metal with extremely high economic benefits, the recovery of silver ions has attracted a particular deal of attention. However, it is a challenge to recover silver ions efficiently and selectively from aqueous solutions. In this research, the novel metal-organic frameworks (MOFs) adsorbent (Zr-DPHT) is prepared for the highly efficient and selective recovery of silver ions from wastewater. Experimental findings reveal that Zr-DPHT's adsorption of Ag(I) constitutes an endothermic process, with an optimal pH of 5 and exhibits a maximum adsorption capacity of 268.3 mg·g-1. Isotherm studies show that the adsorption of Ag(I) by Zr-DPHT is mainly monolayer chemical adsorption. Kinetic studies indicate that the internal diffusion of Ag(I) in Zr-DPHT may be the rate-limiting step. The mechanism for Ag(I) adsorption on Zr-DPHT involves electrostatic interactions and chelation. In competitive adsorption, Ag(I) has the largest partition coefficient (9.64 mL·mg-1), indicating a strong interaction between Zr-DPHT and Ag(I). It is proven in the adsorption-desorption cycle experiments that Zr-DPHT has good regeneration performance. The research results indicate that Zr-DPHT can serve as a potential adsorbent for efficiently and selectively capturing Ag(I), providing a new direction for MOFs in the recycling field of precious metals.

Applications of hollow nanostructures in water treatment considering organic, inorganic, and bacterial pollutants

One of the major issues of modern society is water contamination with different organic, inorganic, and contaminants bacteria. Finding cost-effective and efficient materials and methods for water treatment and environment remediation is among the scientists' most important considerations. Hollow-structured nanomaterials, including hollow fiber membranes, hollow spheres, hollow nanoboxes, etc., have shown an exciting capability for wastewater refinement approaches, including membrane technology, adsorption, and photocatalytic procedure due to their extremely high specific surface area, high porosity, unique morphology, and low density. Diverse hollow nanostructures could potentially eliminate organic contaminants, including dyes, antibiotics, oil/water emulsions, pesticides, and other phenolic compounds, inorganic pollutants, such as heavy metal ions, salts, phosphate, bromate, and other ions, and bacteria contaminations. Here, a comprehensive overview of hollow nanostructures' fabrication and modification, water contaminant classification, and recent studies in the water treatment field using hollow-structured nanomaterials with a comparative attitude have been provided, indicating the privilege abd detriments of this class of nanomaterials. Eventually, the future outlook of employing hollow nanomaterials in water refinery systems and the upcoming challenges arising in scaling up are also propounded.

Green synthesis of chitosan/glutamic acid/agarose/Ag nanocomposite hydrogel as a new platform for colorimetric detection of Cu ions and reduction of 4-nitrophenol

In this study, the green synthesis of chitosan/glutamic acid/agarose/Ag (Chi/GA/Aga/Ag) nanocomposite hydrogel was obtained via in situ reduction of Ag ions during the crosslinking process of chitosan-agarose double network hydrogels. The rich hydroxyl, carboxyl and amino groups in both agarose, chitosan, and glutamic acid can effectively control the growth, dispersion and immobilization of nearly spherical Ag nanoparticles (70 nm) in the Chi/GA/Aga/Ag composite hydrogel. Glutamic acids can act as the structure-directing agents to induce the formation of chitosan/glutamic acid hydrogel. The mechanical strength of the Chi/GA/Aga/Ag composite hydrogel can be enhanced by the introduction of chitosan-agarose double network hydrogels, which guarantees that it can be directly used as a visual test strip of the Cu ions with a lower detection limit of 1 μM and an active catalyst for the reduction of 4-nitrophenol within 18 min. The quantitative and semi-quantitative measurement of Cu ions can be carried out by UV-visible absorption spectroscopy and visual measurement, which provided a convenient, portable, and "naked-eye" solid-state detection methodology.

Development of a chitosan/nanosilica biocomposite with arene functionalization via hydrothermal synthesis for acid red 88 dye removal

Herein, the polymer nanomatrix of chitosan/SiO2 (CHI/n-SiO2) was enriched with a π-π electron donor-acceptor system using diaromatic rings of benzil (BEZ) assisted via a hydrothermal process to obtain an effective adsorbent of chitosan-benzil/SiO2 (CHI-BEZ/n-SiO2). The polymer nanomatrix (CHI/n-SiO2) and the resulting adsorbent (CHI-BEZ/n-SiO2) were applied to remove the anionic acid red 88 (AR88) dye from aqueous media in a comparative mode. Box-Behnken design (BBD) was adopted to optimize AR88 adsorption onto CHI/n-SiO2 and CHI-BEZ/n-SiO2 with respect to variables that influence AR88 adsorption (adsorbent dose: 0.02-0.1 g/100 mL; pH: 4-10; and time: 10-90). The adsorption studies at equilibrium were conducted with a variety of initial AR88 dye concentrations (20-200 mg/L). The adsorption isotherm results reveal that the AR88 adsorption by CHI/n-SiO2 and CHI-BEZ/n-SiO2 are described by the Langmuir model. The kinetic adsorption profiles of AR88 with CHI/n-SiO2 and CHI-BEZ/n-SiO2 reveal that the pseudo-first-order model provides the best fit results. Interestingly, CHI-BEZ/n-SiO2 has a high adsorption capacity (261.2 mg/g), which exceeds the adsorption capacity of CHI/n-SiO2 (215.1 mg/g) that relates to the surface effects of SiO2 and the functionalization of chitosan with BEZ. These findings show that CHI-BEZ/n-SiO2 represents a highly efficient adsorbent for the removal of harmful pollutants from water, which outperforming the CHI/n-SiO2 system.

Recent advances in removal of inorganic anions from water by chitosan-based composites: A comprehensive review

Chitosan is a modified natural carbohydrate polymer that has been found in the exoskeletons of crustaceans (e.g., lobsters, shrimps, krill, barnacles, crayfish, etc.), mollusks (octopus, oysters, squids, snails), algae (diatoms, brown algae, green algae), insects (silkworms, beetles, scorpions), and the cell walls of fungi (such as Ascomycetes, Basidiomycetes, and Phycomycetes; for example, Aspergillus niger and Penicillium notatum). However, it is mostly acquired from marine crustaceans such as shrimp shells. Chitosan-based composites often present superior chemical, physical, and mechanical properties compared to single chitosan by incorporating the benefits of both counterparts in the nanocomposites. The tunable surface chemistry, abundant surface-active sites, facilitation synthesize and functionalization, good recyclability, and economic viability make the chitosan-based materials potential adsorbents for effective and fast removal of a broad range of inorganic anions. This article reviews the different types of inorganic anions and their effects on the environment and human health. The development of the chitosan-based composites synthesis, the various parameters like initial concentration, pH, adsorbent dosage, temperature, the mechanism of adsorption, and regeneration of adsorbents are discussed in detail. Finally, the prospects and technical challenges are emphasized to improve the performance of chitosan-based composites in actual applications on a pilot or industrial scale.

Myrica esculenta Leaf Extract-Assisted Green Synthesis of Porous Magnetic Chitosan Composites for Fast Removal of Cd (II) from Water: Kinetics and Thermodynamics of Adsorption

Heavy metal contamination in water resources is a major issue worldwide. Metals released into the environment endanger human health, owing to their persistence and absorption into the food chain. Cadmium is a highly toxic heavy metal, which causes severe health hazards in human beings as well as in animals. To overcome the issue, current research focused on cadmium ion removal from the polluted water by using porous magnetic chitosan composite produced from Kaphal (Myrica esculenta) leaves. The synthesized composite was characterized by BET, XRD, FT-IR, FE-SEM with EDX, and VSM to understand the structural, textural, surface functional, morphological-compositional, and magnetic properties, respectively, that contributed to the adsorption of Cd. The maximum Cd adsorption capacities observed for the Fe3O4 nanoparticles (MNPs) and porous magnetic chitosan (MCS) composite were 290 mg/g and 426 mg/g, respectively. Both the adsorption processes followed second-order kinetics. Batch adsorption studies were carried out to understand the optimum conditions for the fast adsorption process. Both the adsorbents could be regenerated for up to seven cycles without appreciable loss in adsorption capacity. The porous magnetic chitosan composite showed improved adsorption compared to MNPs. The mechanism for cadmium ion adsorption by MNPs and MCS has been postulated. Magnetic-modified chitosan-based composites that exhibit high adsorption efficiency, regeneration, and easy separation from a solution have broad development prospects in various industrial sewage and wastewater treatment fields.

A review on heavy metal biosorption utilizing modified chitosan

Heavy metal pollution in water bodies is a global concern. The prominent source of metal contamination in aqueous streams and groundwater is wastewater containing heavy metal ions. Elevated concentrations of heavy metals in water bodies can have a negative impact on water quality and public health. The most effective way to remove metal contaminants from drinking water is thought to be adsorption. A deacetylated derivative of chitin, chitosan, has a wide range of commercial uses since it is biocompatible, nontoxic, and biodegradable. Due to its exceptional adsorption behavior toward numerous hazardous heavy metals from aqueous solutions, chitosan and its modifications have drawn a lot of interest in recent years. Due to its remarkable adsorption behavior toward a range of dangerous heavy metals, chitosan is a possible agent for eliminating metals from aqueous solutions. The review has focused on the ideas of biosorption, its kinds, architectures, and characteristics, as well as using modified (physically and chemically modified) chitosan, blends, and composites to remove heavy metals from water. The main objective of the review is to describe the most important aspects of chitosan-based adsorbents that might be beneficial for enhancing the adsorption capabilities of modified chitosan and promoting the usage of this material in the removal of heavy metal pollutants.

Efficiency and mechanism in preparation and heavy metal cation/anion adsorption of amphoteric adsorbents modified from various plant straws

Cellulose can be modified for the loading of functional groups such as amino groups, sulfydryl groups, and carboxyl groups. Cellulose-modified adsorbents generally have specific adsorption capacities for either heavy metal anions or cations, and possess the advantages of wide raw material source, high modification efficiency, high adsorbent recyclability, and great convenience in recovery of the adsorbed heavy metals. At present, preparation of amphoteric heavy metal adsorbents from lignocellulose has attracted great attention. However, the difference in efficiency of preparing heavy metal adsorbents by modification of various plant straw materials and mechanism for the difference remain to be further explored. In this study, three plant straws, including Eichhornia crassipes (EC), sugarcane bagasse (SB) and metasequoia sawdust (MS), were sequentially modified by tetraethylene-pentamine (TEPA) and biscarboxymethyl trithiocarbonate (BCTTC) to obtain amphoteric cellulosic adsorbents (EC-TB, SB-TB and MS-TB, respectively), which can simultaneously adsorb heavy metal cations or anions. The heavy metal adsorption properties and mechanism before and after modification were compared. Pb(II) and Cr(VI) removal rates by the three adsorbents were 2.2-4.3 folds and 3.0-13.0 folds of those before modification, respectively, following the order of MS-TB > EC-TB > SB-TB. In the five-cycle adsorption-regeneration test, the Pb(II) and Cr(VI) removal rate by MS-TB decreased by 58.1 % and 21.5 %, respectively. Among the three plant straws, MS possessed the most abundant hydroxyl groups and the largest specific surface area (SSA), and accordingly MS-TB had the highest load of adsorption functional groups [(C)NH, (S)CS and (HO)CO] and also the largest SSA among the three adsorbents, which contribute to its highest modification and adsorption efficiency. This study is of great significance for screening suitable raw plant materials to prepare amphoteric heavy metal adsorbents with superior adsorption performance.

Recent Application Prospects of Chitosan Based Composites for the Metal Contaminants Wastewater Treatment

Heavy metals, known for their toxic nature and ability to accumulate and magnify in the food chain, are a major environmental concern. The use of environmentally friendly adsorbents, such as chitosan (CS)—a biodegradable cationic polysaccharide, has gained attention for removing heavy metals from water. This review discusses the physicochemical properties of CS and its composites and nanocomposites and their potential application in wastewater treatment.

CeO2@PU sandwiched in chitosan and cellulose acetate layer as Cs-CeO2@PU-CA triple-layered membrane for chromium removal

The single or blended polymer membrane lacks a few advantages based on the durability of the membrane. The novel triple-layered sandwich membrane Cs-CeO₂@PU-CA membrane is cast through the phase inversion technique for chromium removal. This approach involves an arrangement of the top layer as chitosan which acts as a protective layer, and the sandwich layer of CeO₂@PU membrane which acts as source for stability, and a supportive layer of cellulose acetate is arranged accordingly. The incorporation of cerium oxide nanoparticles into the polyurethane can create pores on the surface of the membrane due to the high aspect ratio of cerium oxide. The triple-layered arrangement shows higher porosity via water contact angle, the network of pores present on the membrane which is visible through morphology, and also the intermediate sandwich layer CeO₂@PU provided with better mechanical strength which would be significant for changes achieved in adsorption technique. The batch adsorption was carried out with various ppm of Cr(VI) solution. The effect of pH, contact time, initial concentration, and temperature were analyzed and optimized for determining efficiency of chromium removal. Furthermore, the suitable adsorption isotherm and kinetics of the system were also determined for better fit via Langmuir, Freundlich, Temkin, and Sips along with pseudo-first-order and pseudo-second-order. The efficiency in adsorption is due to the prominent presence of hydroxyl, carboxyl, and hydrophilic group in the prepared membrane. Thus, the resultant prepared membrane can act as a potential chromium removal substrate.

Recent progress and future directions of membranes green polymers for oily wastewater treatment

The preparation, modification and application of green polymers such as poly-lactic acid (PLA), chitosan (CS), and cellulose acetate (CA) for oily wastewater treatment is summed up in this review. Due to the low environmental pollution, good chemical resistivity, high hydrophobicity, and good capacity for water-oil emulsion separation of the presented polymers, it then highlights the various membrane production methods and their role in producing effective membranes, with a focus on recent advances in improving membrane properties through the addition of various Nano materials. As a result, the hydrophilic/hydrophobic properties that are critical in the oil separation mechanism are highlighted. Finally, it looks at the predictions and challenges in oil/water separation and recovery. These ideas are discussed with a focus on modern production methods and oil separation proficiency.

Chitosan magnetic graphene grafted polyaniline doped with cobalt oxide for removal of Arsenic(V) from water

The present study reports the successful functionalization/magnetization of bio-polymer to produce chitosan-magnetic graphene oxide grafted polyaniline doped with cobalt oxide (ChMGOP-Co₃O₄). Analytical techniques furrier transform infra-red (FT-IR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) were used to confirm the formation of ChMGOP-Co₃O₄. The effects of several experimental factors (solution pH, adsorbent dosage and coexisting ions) on the uptake of As(V) ions using ChMGOP-Co₃O₄ were examined through batch experiments. As(V) removal process was validated by experimentally and theoretically investigating the adsorption capacity, rate, and thermal effects. Thermodynamic parameters such as free energy (ΔG°), entropy (ΔS°) and enthalpy (ΔH°) were also calculated and were used to explain the mechanism of adsorption. Based on the results, the sorbent showed a high adsorption capacities (90.91 mg/g) at favorable neutral pH and superior removal efficiencies as high as 89% within 50 min. In addition, the adsorption isotherm followed the Langmuir isotherm in compare to the Freundlich, due to its higher R² value (0.992 < 0.941). Meanwhile, the kinetic data revealed that the of As(V) adsorption was controlled by pseudo-second-order. Overall, the adsorption mechanism studies revealed a spontaneous endothermic nature with predominance of physisorption over chemisorption. This study indicated that ChMGOP-Co₃O₄ is an exceptional novel adsorbent material for the efficient isolation of As(V) from aqueous media.

In situ growth of ZIF-8 on carboxymethyl chitosan beads for improved adsorption of lead ion from aqueous solutions

In this study, a method for the in situ growth of zeolitic imidazolate framework-8 (ZIF-8) on carboxymethyl chitosan beads (BCMC) to produce a composite adsorbent (BCMC@ZIF-8) for the removal of Pb²⁺ from water is proposed. The results revealed that the utilization of the BCMC as a framework enhanced the stability of ZIF-8, and the presence of the latter in the composite improved the removal efficiency of Pb²⁺ from water. Data from X-ray photoelectron spectroscopy analysis and adsorption kinetics revealed that the adsorption mechanism included diffusion and the sharing/transfer of electrons between BCMC@ZIF-8 and Pb²⁺. The maximum adsorption capacity of BCMC@ZIF-8 fitted using the Langmuir model was 566.09 mg/g. Results of the experiments on the regeneration of the adsorbent and its stability in water further indicated that BCMC improved the stability of ZIF-8. This study demonstrated that the stability of metal-organic framework (MOF) materials, which exhibited high efficiencies for the removal of heavy metals in water can be improved through fixation of the polymer skeleton. Thus, the present study offers practical and theoretical guidance for the application of MOF materials in water treatment.

Heavy metal-contained wastewater in China: Discharge, management and treatment

A large amount of heavy metal-contained wastewater (HMW) was discharged during Chinese industry development, which has caused many environmental problems. This study reviewed discharge, management and treatment of HMW in China through collecting and analyzing data from China's official statistical yearbook, standards, technical specifications, government reports, case reports, and research paper. Results showed that industry wastewater discharged by an amount of about 221.6 × 10⁸ t (in 2012), where emission of heavy metals including Pb, Hg, Cd, Cr(VI), T-Cr was around 388.4 t (in 2012). Heavy metal emission with wastewater in east China and central south China was observed to be graver than that in other areas. However, control of heavy metals in Pb and Cd in northwest China was more difficult compared with other areas. In terms of management, China's government has issued many wastewater discharge standards, strict management policies for controlling HMW discharge in recent years, resulting in reduced HMW discharge. In addition, main HMW treatment technology in China was chemical precipitation, and other technologies such as membrane separation, adsorption, ion exchange, electrochemical and biological methods were also occasionally applied. In the future, chemical industries will be concentrated in northwest China, therefore control of HMW discharge should be paid much more attention in those areas. In addition, more effective and environment-friendly heavy metal removal and regeneration technologies should be developed, such as biomaterials adsorbent.

Functionalized Activated Carbon Fibers by Hydrogen Peroxide and Polydopamine for Efficient Trace Lead Removal from Drinking Water

To achieve efficient and selective trace heavy metals removal from drinking water, a low-cost purification material polydopamine/activated carbon fibers (PDA/H-ACF) was successfully prepared by polymerizing dopamine on the surface of activated carbon fibers pretreated with hydrogen peroxide. The morphology, phase, surface functional groups, specific surface, and pore size distribution of the as-prepared sample were analyzed using FESEM, XPS, BET and pore size distribution test (PST), and FTIR, and orthogonal experiments were used to investigate the influences of concentration of H₂O₂, pretreatment time, and reflux temperature on trace lead removal. The results showed that the sample pretreated under optimized conditions could produce different pore structures, and the content of functional group -COOH obviously increased. After further modification by polydopamine, the contents of -NH-, -NH₂, and -OH functional groups on the surface obviously enhanced, which were beneficial to increase adsorption site and promote trace lead removal. The effluent lead concentration decreased from initial 150 to 3.18 ppb within 5 min, meeting the requirement of NSF International Standard/American National Standard for Drinking Water Treatment Units (NSF/ANSI 53-2020) (5 ppb). The isothermal adsorption process and adsorption kinetics could be well-fitted by the Langmuir isotherm and pseudo-second-order kinetics model, indicating that the adsorption process of trace lead by PDA/H-ACF belonged to monolayer and chemical adsorption. Moreover, the as-prepared PDA/H-ACF also showed superior trace lead adsorption performance in the presence of high concentration competitive metal ions, in a wide pH range and in tap water, and therefore had good application prospect in the field of drinking water purification.

Carbon nanotubes from waste cooking palm oil as adsorbent materials for the adsorption of heavy metal ions

In this work, waste cooking palm oil (WCPO)-based carbon nanotubes (CNTs) with encapsulated iron (Fe) nanoparticles have been successfully produced via modified thermal chemical vapor deposition method. Based on several characterizations, the dense WCPO-based CNT was produced with high purity of 89% and high crystallinity proven by low I_D/I_G ratio (0.43). Moreover, the ferromagnetic response of CNTs showed that the average coercivity and magnetization saturation were found to be 551.5 Oe and 13.4 emu/g, respectively. These produced WCPO-based CNTs were further used as heavy metal ions adsorbent for wastewater treatment application. Some optimizations, such as the effect of different adsorbent dosage, varied initial pH solution, and various heavy metal ions, were investigated. The adsorption studies showed that the optimum adsorbent dosage was 1.8 g/L when it was applied to 100 mg/L Cu (II) solution at neutral pH (pH 7). Further measurement then showed that high Cu (II) ion removal percentage (~80%) was achieved when it was applied at very acidic solution (pH 2). Last measurement confirmed that the produced WCPO-based CNTs successfully removed different heavy metal ions in the following order: Fe (II) > Zn (II) ≈ Cu (II) with the removal percentage in the range of 99.2 to 99.9%. The adsorption isotherm for Cu (II) was better fitted by Langmuir model with a correlation coefficient of 0.82751. WCPO-based CNTs can be a potential material to be applied as adsorbent in heavy metal ion removal.

A Review of Caffeine Adsorption Studies onto Various Types of Adsorbents

A systematic literature review of publications from 2000 to 2020 was carried out to identify research trends on adsorbent materials for the removal of caffeine from aqueous solutions. Publications were retrieved from three databases (Scopus, Web of Science, and Google Scholar). Words "adsorption AND caffeine" were examined into titles, abstracts, and keywords. A brief bibliometric analysis was performed with emphasis on the type of publication and of most cited articles. Materials for the removal of caffeine were classified according to the type of material into three main groups: organic, inorganic, and composites, each of them subdivided into different subgroups consistent with their origin or production. Tables resume for each subgroup of adsorbents the key information: specific surface area, dose, pH, maximum adsorption capacity, and isotherm models for the removal of caffeine. The highest adsorption capacities were achieved by organic adsorbents, specifically those with granular activated carbon (1961.3 mg/g) and grape stalk activated carbon (916.7 mg/g). Phenyl-phosphate-based porous organic polymer (301 mg/g), natural sandy loam sediment (221.2 mg/g), composites of MCM-48 encapsulated graphene oxide (153.8 mg/g), and organically modified clay (143.7 mg/g) showed adsorption capacities lower than those of activated carbons. In some activated carbons, a relation between the specific surface area (SSA) and the maximum adsorption capacity (Q max) was found.

Recent Developments in Chitosan-Based Adsorbents for the Removal of Pollutants from Aqueous Environments

The quality of water is continuously under threat as increasing concentrations of pollutants escape into the aquatic environment. However, these issues can be alleviated by adsorbing pollutants onto adsorbents. Chitosan and its composites are attracting considerable interest as environmentally acceptable adsorbents and have the potential to remove many of these contaminants. In this review the development of chitosan-based adsorbents is described and discussed. Following a short introduction to the extraction of chitin from seafood wastes, followed by its conversion to chitosan, the properties of chitosan are described. Then, the emerging chitosan/carbon-based materials, including magnetic chitosan and chitosan combined with graphene oxide, carbon nanotubes, biochar, and activated carbon and also chitosan-silica composites are introduced. The applications of these materials in the removal of various heavy metal ions, including Cr(VI), Pb(II), Cd(II), Cu(II), and different cationic and anionic dyes, phenol and other organic molecules, such as antibiotics, are reviewed, compared and discussed. Adsorption isotherms and adsorption kinetics are then highlighted and followed by details on the mechanisms of adsorption and the role of the chitosan and the carbon or silica supports. Based on the reviewed papers, it is clear, that while some challenges remain, chitosan-based materials are emerging as promising adsorbents.

Utilization of rice husk and waste aluminum cans for the synthesis of some nanosized zeolite, zeolite/zeolite, and geopolymer/zeolite products for the efficient removal of Co(II), Cu(II), and Zn(II) ions from aqueous media

In this paper, rice husk and waste aluminum cans were exploited as silicon and aluminum sources, respectively for the low-cost synthesis of some nanosized zeolite, zeolite/zeolite, and geopolymer/zeolite products. XRD confirmed that the synthesized geopolymer/zeolite products are geopolymer/zeolite A (has a crystallite size of 58.44 nm & abbreviated as G1) and geopolymer/faujasite (has a crystallite size of 25.58 and 20.26 nm & abbreviated as G2 and G3, respectively). Also, the synthesized zeolite products are sodium aluminum silicate hydrate (has a crystallite size of 27.65 and 41.85 nm & abbreviated as H1 and H2, respectively). Besides, the synthesized zeolite/zeolite product is sodium aluminum silicate hydrate/zeolite A (has a crystallite size of 66.01 nm and abbreviated as H3). Moreover, the synthesized products were characterized using other tools such as HR-TEM, FE-SEM, EDX, and FT-IR. The synthesized products were efficiently applied for removing Co(II), Cu(II), and Zn(II) ions from aqueous media and wastewater which was taken from Abuzaabal- Qalyubiyah-Egypt. The maximum uptake capacity of G3 sample toward Co(II), Cu(II), and Zn(II) ions is 134.24 ± 1.26, 126.26 ± 0.32, and 131.93 ± 0.87 mg/g, respectively. The uptake of the studied metal ions is spontaneous, chemical, exothermic, and fitted well with the Langmuir isotherm and pseudo-2nd-order kinetic model.

Adsorption Processing for the Removal of Toxic Hg(II) from Liquid Effluents: Advances in the 2019 Year

Mercury is a toxic metal, thus, it is an element which has more and more restrictions in its uses, but despite the above, the removal of this metal, from whatever the form in which it is encountered (zero valent metal, inorganic, or organic compounds), and from different sources, is of a widespread interest. In the case of Hg(II), or Hg2+, the investigations about the treatment of Hg(II)-bearing liquid effluents (real or in most cases synthetic solutions) appear not to end, and from the various separation technologies, adsorption is the most popular among researchers. In this topic, and in the 2019 year, more than 100 publications had been devoted to this field: Hg(II)-removal-adsorption. This work examined all of them.

PAMPS-graft-Ni3Si2O5(OH)4 multiwalled nanotubes as a novel nano-sorbent for the effective removal of Pb(ii) ions

The existence of Pb(ii) ions in water systems poses significant potential hazards to public health and the environment. In the present study, poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS) brush-modified Ni₃Si₂O₅(OH)₄ nanotubes were prepared, and their adsorption efficiency against the Pb(ii) ions was investigated. The characterization results of FTIR spectroscopy, TGA, TEM, and XPS indicated the successful grafting of PAMPS on the surface of free Ni₃Si₂O₅(OH)₄ NTs, and the prepared PAMPS-g-Ni₃Si₂O₅(OH)₄ NTs exhibited a 6–8 nm grafting layer, which could provide abundant binding sites for metal adsorption. During the Pb(ii) removal process, a pH-dependent adsorption behavior was observed, and the adsorption processes fitted well with the pseudo-second-order kinetic model and the Langmuir isotherm model. Compared with unmodified Ni₃Si₂O₅(OH)₄, the PAMPS-g-Ni₃Si₂O₅(OH)₄ NTs exhibited obviously faster adsorption of Pb(ii) and higher equilibrium adsorption capacity for the removal of Pb(ii). The maximum adsorption capacity calculated via the Langmuir isotherm model was 0.653 mmol g⁻¹ (135.3 mg g⁻¹) at 298 K. In a metal coexisting system, the total adsorption capacity of the NTs was increased; this indicated the potential of the proposed NTs in the removal of Pb(ii) from metal coexisting wastewater. This study showed the significant potential of PAMPS-g-Ni₃Si₂O₅(OH)₄ NTs in the effective removal of Pb(ii).

PAMPS-g-Ni₃Si₂O₅(OH)₄ NTs for the effective removal of Pb(ii).

Removal of copper and cadmium ions from alkaline solutions using chitosan-tannin functional paper materials as adsorbent

We successfully absorbed the copper ion (Cu²⁺) and cadmium ion (Cd²⁺) from alkaline aqueous solutions using the prepared chitosan-tannin (CTS/TA) functional paper as absorbent materials. The kinetics of the adsorption, the adsorption isotherms, and the influence of the solution flow rate and pH were investigated detailly. The adsorption data were described well by Langmuir isotherms, with maximum copper (Cu²⁺) and cadmium (Cd²⁺) adsorption capacities of 684.93 and 813.01 mg/m², respectively. The experimental results also showed that the adsorption of these heavy metals was selective in the order of Cu²⁺ > Cd²⁺, as Cu²⁺ competed with Cd²⁺ for bonding sites at solution concentrations greater than or equal to 200 mg/L. The results of this study illustrated that the chitosan-tannin functional paper materials mainly followed a complexation-adsorption model, and the best adsorption capacity was achieved at pH = 9. The desorption of heavy ions from this adsorbent and its reusability of functional paper was also involved. Therefore, this novel, environment-friendly functional paper can surely act as an effective adsorbent for the removal and recovery of heavy metals in alkaline aqueous solutions.

Separation of oil-water emulsion and adsorption of Cu(II) on a chitosan-cellulose acetate-TiO2 based membrane

A modified cellulose acetate, modified chitosan, titanium dioxide membrane (MCA-MCS-TiO₂) was prepared for oil-water emulsion separation and Cu(II) adsorption. This membrane shows excellent hydrophilicity and underwater oleophobicity. After being modified, the water contact angles of the membranes attain 13.7°, and the underwater oil contact angles reach 157.24°. The membrane exhibits high oil-water separation efficiency (99.4%) for cyclohexane, at the same time, the adsorption amount of Cu(II) on the membrane was measured. The variables include the ratio of modified cellulose to modified chitosan, the initial concentration of Cu(II), and the pH of Cu(II) solution. When pH = 7, the adsorption capacity of the membrane to Cu(II) reaches 220.67  mg g^-1. When the concentration of Cu(II) solution is 1000 mg L^-1, the adsorption efficiency is as high as 97.0%.

The Roles of Nanomaterials in Conventional and Emerging Technologies for Heavy Metal Removal: A State-of-the-Art Review

Heavy metal (HM) pollution in waterways is a serious threat towards global water security, as high dosages of HM poisoning can significantly harm all living organisms. Researchers have developed promising methods to isolate, separate, or reduce these HMs from water bodies to overcome this. This includes techniques, such as adsorption, photocatalysis, and membrane removal. Nanomaterials play an integral role in all of these remediation techniques. Nanomaterials of different shapes have been atomically designed via various synthesis techniques, such as hydrothermal, wet chemical synthesis, and so on to develop unique nanomaterials with exceptional properties, including high surface area and porosity, modified surface charge, increment in active sites, enhanced photocatalytic efficiency, and improved HM removal selectivity. In this work, a comprehensive review on the role that nanomaterials play in removing HM from waterways. The unique characteristics of the nanomaterials, synthesis technique, and removal principles are presented. A detailed visualisation of HM removal performances and the mechanisms behind this improvement is also detailed. Finally, the future directions for the development of nanomaterials are highlighted.