Cobalt oxide loaded graphitic carbon nitride as adsorptive photocatalyst for tetracycline removal from aqueous solution

CeO2 nanospheres incorporated with Bi2MoO6/g-C3N4 enhanced photocatalysis towards environmental pollutant Rhodamine B removal

We have adopted a novel CeO2/Bi2MoO6/g-C3N4-based ternary nanocomposite that was synthesized via hydrothermal technique. The physiochemical characterization of as-prepared samples was examined through various analytical techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy TEM, photoluminescent spectra (PL), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), and ultraviolet diffuse reflectance spectroscopy (UV-DRS) technique. In addition, the photocatalytic performance was carried out by degradation of Rhodamine B dye under visible light irradiation using this nanocatalyst. The ternary nanocomposite achieved 94% of the degradation efficiency within 100 min which is higher than the pristine and binary composites under the predetermined condition pH = 7, Rhodamine B dye = 5 mg/L, and catalyst concentration = 150 mg/L. The experimental synergetic effect of CeO2/Bi2MoO6/g-C3N4 ternary nanocomposite has been ascribed to the interfacial charge carrier migration between CeO2, Bi2MoO6, and g-C3N4. The optical absorption range of CeO2/Bi2MoO6/g-C3N4 ternary nanocomposite was enhanced, and the band gap was reduced up to 2.2 eV. In addition, scavenger trapping experiment proves that the super oxide anions (O2-.) and photogenerated holes are the major active species. The reusability and stability experiment proved the CeO2/Bi2MoO6/g-C3N4 ternary nanocomposite keeps good durability during the photocatalytic degradation process after the five successive cycles. Furthermore, based on the results, the charge carrier transfer photocatalytic mechanism was also discussed. This CeO2/Bi2MoO6/g-C3N4 ternary nanocomposite may offer the cheapest material and extend the great opportunity for clean and environmental remediation approach under the visible light irradiation.

Surface plasmon resonance Bismuth-modified NH2-UiO-66 with enhanced photocatalytic tetracycline degradation performance

For nearly a century, the misuse of antibiotics has gradually polluted water and threatened human health. Photocatalysis is considered an efficient way to remove antibiotics from water. Zirconium-based metal-organic frameworks have attracted much attention as promising photocatalysts for the degradation of antibiotics. However, single Zirconium-based metal-organic frameworks can still not achieve a more satisfactory photocatalytic efficiency, due to poor light absorption and charge separation efficiency. In this study, a novel metal-loaded metal-organic frameworks material was explored. As a potential photocatalytic material, the performance of NH2-UiO-66 in the photocatalytic degradation of tetracycline was greatly improved just by the loading of a single metal. Bismuth/NH2-UiO-66 photocatalysts of various compositions were physicochemically (TEM, SEM, XRD, XPS, BET, FTIR, UV-VIS, PL), and electrochemically (electrochemical impedance spectroscopy, photocurrent response) characterized. We evaluated the photocatalytic performance of Bismuth/NH2-UiO-66 composites by measuring their ability towards tetracycline decomposition in simulated sunlight irradiation conditions. The experimental results indicated that the introduction of metal Bismuth significantly boosts the photocatalytic activity of the composite catalysts. The final degradation rate of Bismuth/NH2-UiO-66 for tetracycline was found to be 95.8%, namely 2.7 times higher than pure NH2-UiO-66. This behavior is due to the surface plasmon resonance effect of Bismuth, which ameliorates the photocatalyst's electron-hole separation and strengthens the charge transfer. Apart from that, the presence of Bismuth magnifies the visible-light absorption range of Bismuth/NH2-UiO-66. In this study, an innovative approach for designing efficient and cost-effective metal-modified metal-organic frameworks photocatalysts is proposed.

A novel BC/g-C3N4 porous hydrogel carrier used in intimately coupled photocatalysis and biodegradation system for efficient removal of tetracycline hydrochloride in water

Intimately coupled photocatalysis and biodegradation (ICPB) is a promising technology to remove refractory contaminants from water. The key to successful ICPB is a carrier capable of accumulating biofilm and adhering photocatalyst firmly. Herein, BC/g-C₃N₄ was prepared into a three dimensional porous hydrogel and used as a carrier in ICPB system for the first time. Degradation experiments revealed that the removal rate of tetracycline hydrochloride (TCH) in water by the ICPB system was 96.0% after 10 h, which was significantly higher than that by the photocatalysis (PC, 76.3%), biodegradation (B, 32.5%), adsorption (AD, 17.2%), and photolysis (P, 5.0%) systems. Photo-electrochemical tests confirmed that ICPB system had superior electron transfer ability between photocatalysts and microorganisms. The removal efficiency of COD proved that microorganisms played an important role in the mineralization process of TCH by the ICPB system. After the ICPB degradation experiment, microorganisms maintained high activity and Pseudomonas, Burkholderiaceae and Flavobacterium which had TCH degradation or electron transport ability, were enriched. In conclusion, the novel ICPB carrier overcame shortcomings of the traditional ICPB carrier and the novel ICPB system had superior degradation performance for TCH. This study provided a possible method to promote the practical application of ICPB technology.

Magnetic-Transition-Metal Oxides Modified Pollen-Derived Porous Carbon for Enhanced Absorption Performance

In our work, the transition-metal-oxide precursor (TMO@BC, M = Fe, Co, Ni) has been loaded on the pollen carbon by the hydrothermal method and annealed at different temperatures to generate a composite material of metal oxide and pollen carbon in this study, which can effectively prevent agglomeration caused by a small size and magnetism. The XRD patterns of the samples showed that the as-synthesized metal oxides were γ-Fe₂O₃, CoO, and NiO. In the 20 mg/L methyl orange adsorption experiment, the adsorption amount of CoO@C at 500 ℃ reached 19.32 mg/g and the removal rate was 96.61%. Therefore, CoO@C was selected for the adsorption correlation-model-fitting analysis, which was in line with the secondary reaction. The pseudo-second-order kinetic model (R²: 0.9683-0.9964), the intraparticle diffusion model, and the Freundlich adsorption isotherm model indicated that the adsorption process was the result of both physical and chemical adsorptions, and the judgment was based on the electrostatic action. The adsorption and removal efficiency of ciprofloxacin (CIP) by changing the pH of the reaction was about 80%, so the electrostatic attraction worked, but not the main factor. Recovered by an external magnetic field, the three-time recycling efficiency was still maintained at more than 80%. This novel biomass-derived magnetic porous carbon material embedded with transition-metal-oxide nanoparticles is highly promising for many applications, especially in the field of environmental remediation.

Performance and mechanism of tea waste biochar in enhancing the removal of tetracycline by peroxodisulfate

In this work, tea waste biochar was prepared and used to activate peroxodisulfate (PDS) for the removal of tetracycline (TC) efficiently. And SEM, XRD, Raman, and FTIR were used to characterize the biochar. The effects of reaction conditions including initial pH, biochar dosage, and PDS concentration on the removal of TC were explored, and the result showed that compared with the biochar prepared at 400 °C and 500 °C, the biochar pyrolyzed at 600 °C (TBC600) had the highest TC removal performance due to its higher sp² hybrid carbon content, richer defective structure, and stronger electron deliverability. Under the optimal dosage of PDS (4 mM) and TBC600 (0.8 g L^-1), the removal efficiency of TC (10 mg L^-1) reached 81.65%. After four cycles of TBC600, the removal rate could still reach 75.51%, indicating that TBC600 has excellent stability. In addition, quenching experiments and electron paramagnetic resonance (EPR) verified that the active oxygen including SO₄·^-, ·OH, O₂·^-, and singlet oxygen (¹O₂) was involved, among which ¹O₂ and OH were the main active substance in the TC removal. Therefore, this work provided a green and efficient persulfate activator and a method for recycling tea waste.

Recent advances in structural modifications of photo-catalysts for organic pollutants degradation - A comprehensive review

Over the last few years, industrial and anthropogenic activities have increased the presence of organic pollutants such as dyes, herbicides, pesticides, analgesics, and antibiotics in the water that adversely affect human health and the environment worldwide. Photocatalytic treatment is considered a promising, economical, effective, and sustainable process that utilizes light energy to degrade the pollutants in water. However, certain drawbacks like rapid recombination and low migration capability of photogenerated electrons and holes have restricted the use of photo-catalysts in industries. Hence, despite the abundance of lab-scale research, the technology is still not much commercialized in the mainstream. Several structural modifications in the photo-catalysts have been adopted to enhance the pollutant degradation performance to overcome the same. In this context, the present review article outlines the different advanced heterostructures synthesized to date for improved degradation of three major organic pollutants: antibiotics, dyes, and pesticides. Moreover, the article also emphasizes the degradation kinetics of photo-catalysts and the publication trend in the past decade along with the roadblocks preventing the transfer of technology from the laboratory to industry and new age photo-catalysts for the profitable implications in industrial sectors.

High-performance Fe-doped ZIF-8 adsorbent for capturing tetracycline from aqueous solution

Efficient removal of antibiotics from aqueous solution is of fundamental importance due to the increasingly severe antibiotic-related pollution. Herein, a high-performance Fe-ZIF-8-500 adsorbent was synthesized by Fe-doping strategy and subsequent activation with high-temperature. In order to evaluate the feasibility of Fe-ZIF-8-500 as an adsorbent for tetracycline (TC) removal, the adsorption properties of Fe-ZIF-8-500 were systematically explored. The results showed that the Fe-ZIF-8-500 exhibited ultrahigh adsorption capacity for TC with a record-high value of 867 mg g^-1. Additionally, the adsorption kinetics and isotherms for TC onto the Fe-ZIF-8-500 can be well-fitted by the pseudo-second-order kinetics model and the Freundlich model, respectively. The ultrahigh adsorption capacity of Fe-ZIF-8-500 can be explained by the synergistic effect of multi-affinities, i.e., surface complexation, electrostatic attraction, π-π interaction and hydrogen bonding. After being used for four cycles the adsorption capacity of Fe-ZIF-8-500 remains a high level, demonstrating its outstanding reusability. The ultrahigh adsorption capacity, excellent reusability, satisfactory water stability and easy-preparation nature of Fe-ZIF-8-500 highlight its bright prospect for removing tetracycline pollutant from wastewater.

Novel Z-Scheme/Type-II CdS@ZnO/g-C3N4 ternary nanocomposites for the durable photodegradation of organics: Kinetic and mechanistic insights

Visible-light-driven photocatalysis is a green and efficient strategy for wastewater treatment, where graphitic carbon nitride-based semiconductors showed excellent performance in this regard. Consequently, we report on the development of a green and facile one-pot room-temperature ultrasonic route for the preparation of novel ternary nanocomposite of cadmium sulfide quantum dots (CdS QDs), zinc oxide nanoparticles (ZnO NPs), and graphitic carbon nitride nanosheets (g-C₃N₄ NSs). The proposed materials had been characterized by several physicochemical techniques such as PXRD, XPS, FE-SEM, HR-TEM, PL, and DRS. The photocatalytic efficiency of the proposed photocatalysts was assessed towards the photodegradation of Rhodamine B dye as a water pollutant model using spectrophotometric measurements. The as-synthesized novel ternary nanocomposite (CdS@ZnO/g-C₃N₄) exhibited perfect photocatalytic activity, where almost complete degradation was achieved in only 2 h under UV-irradiation or 3 h under visible-irradiation. Various methods were used to elucidate the kinetics of the photocatalytic process. Moreover, CdS@ZnO/g-C₃N₄ exhibited a unique synergetic performance when compared to the corresponding binary composites or the individual components. This synergetic performance could be ascribed to the perfect electronic band configuration of the three components, leading to the establishment of several combined synergetic Z-Scheme/Type-II photocatalytic heterojunctions, which is the proposed mechanism for the observed synergetic photocatalytic reactivity of the as-synthesized CdS@ZnO/g-C₃N₄ nanocomposite when compared to the single and binary nanocomposite counterparts. Furthermore, the effects of both the type and concentration of various scavengers on the photocatalytic activity were assessed to investigate the most reactive species, where the reductive degradation pathway was found to be the predominant route. Finally, the photocatalytic efficiency of the as-synthesized CdS@ZnO/g-C₃N₄ composite showed promising and competing results when compared to other photocatalysts reported in the literature.

Ternary multifunctional catalysts of polymeric carbon nitride coupled with Pt-embedded transition metal oxide to enhance light-driven photothermal catalytic degradation of VOCs

Light driven photothermal catalysis has been carried out by converting the light energy into heat to reach the light-off temperature of the reaction. Herein we have synthesized the ternary multifunctional catalysts of polymeric carbon nitride coupled with Pt-embedded transition metal oxide (Pt-Co_x/CN), for the catalytic degradation of toluene. Under the condition of space velocity of 30,000 mL/(gh) and concentration of 210 ppm, toluene conversion and CO₂ mineralization can reach 90% and 83% over Pt-Co₂₀/CN, respectively. The introduction of an appropriate proportion of CoO enhances the light absorption of nanocomposites and improves the adsorption for toluene. Meanwhile, CoO promotes the proportion and mobility of adsorbed oxygen on the surface, which are conducive to the catalytic oxidation reaction according to the Mars-van Krevelen mechanism. The results also suggest that light irradiation serves as a source of heat to initiate photo-induced chemical reactions and promote photothermal catalytic oxidation by promoting the activation of lattice oxygen.

Carbon nitride-based photocatalysts for the mitigation of water pollution engendered by pharmaceutical compounds

In recent decades, the destructive impact of active pharmaceutical ingredients (API) present in surface and drinking water on aquatic and terrestrial life forms becomes a major concern of researchers. API like diclofenac (DCF), carbamazepine (CBZ), tetracycline (TC), and sulfamethoxazole (SME) found in water bodies cause antimicrobial resistance and are potent carcinogens and endocrine disruptors. Conventional wastewater treatment methods possess some drawbacks and were found to be insufficient for the effective removal of APIs. Visible light-assisted semiconductor photocatalysis has become an alternative choice for tackling this worse scenario. Graphitic carbon nitride, a metal-free visible light active semiconductor photocatalyst is an emerging hotspot nanomaterial whose practical utility in water purification is widely recognized. This review comes up with an insightful outlook on the panorama of recent progress in the field of g-C₃N₄-assisted photocatalytic systems for the eradication of APIs. In addition, the review summarizes various strategies adopted for the broad-spectrum utilization of visible light and the enhancement of charge separation of pristine g-C₃N₄. The mechanistic pathways followed by different pharmaceuticals during their photocatalytic degradation process were also briefly discussed.

Bio-removal of tetracycline antibiotics under the consortium with probiotics Bacillus clausii T and Bacillus amyloliquefaciens producing biosurfactants

The contamination of the aquatic environments by tetracycline antibiotics (TCs) is an increasingly pressing issue. Here, we used the addition of exogenous surfactants and in situ biosynthesis of biosurfactants to remove tetracycline (TC), oxytetracycline (OTC), chlortetracycline (CTC), and their mixtures using the co-culture of probiotic Bacillus clausii T and Bacillus amyloliquefaciens HM618 producing surfactin. The addition of exogenous biosurfactants to remove TCs was superior to nonionic surfactants. The maximal bio-removal efficiencies for OTC and CTC among mixed antibiotics under the co-culture of B. clausii T and B. amyloliquefaciens HM618 were 76.6% and 88.9%, respectively, which were both better than the efficiency of the pure culture of B. clausii T. TCs were removed mainly through biotransformation rather than absorption and hydrolysis. The removal efficiency was in the order CTC > OTC > TC. The co-culture of B. clausii T and B. amyloliquefaciens HM618 alleviated the cytotoxicity of OTC and CTC. The toxicity of the biotransformation products was lower than that of the parent compounds. Demethylation, hydroxylation, and dehydration are likely the major mechanisms of TC biotransformation. These results illustrate the potential of using surfactants in the bioremediation of tetracycline antibiotics, and provide new avenues for further exploration of the bioremediation of antibiotics pollution.

Desorption kinetics of tetracyclines in soils assessed by diffusive gradients in thin films

Tetracyclines (TCs) are frequently detected in agricultural soils worldwide, causing a potential threat to crops and human health. In this study, diffusive gradients in thin films technique (DGT) was used to measure the distribution and exchange rates of three TCs (tetracycline (TC), oxytetracycline (OTC) and chlortetracycline (CTC)) between the solid phase and solution in five farmland soils. The relationship between the accumulated masses with time suggested that TCs consumption in soil solution by DGT would induce the supply from the soil solid phase. The distribution coefficient for the labile antibiotics (K_dl), response time (T_c) and desorption/adsorption rates (k_b and k_f) between dissolved and sorbed TCs were derived from the dynamic model of DIFS (DGT induced fluxes in soils). The K_dl showed similar sizes of labile solid phase pools for TC and OTC while larger pool sizes were observed for CTC in the soils. Although the concentrations of CTC were lowest in soil solution, the potential hazard caused by continuous release from soil particles could not be ignored. The long response time (>30 min in most cases) suggested that the resupply of TCs from soil solids was limited by their desorption rates (1.26-121 × 10^-6 s^-1). The soils in finer texture, with higher clay and silt contents (<50 μm) showed a greater potential for TCs release.

Strong adsorption of tetracycline hydrochloride on magnetic carbon-coated cobalt oxide nanoparticles

The overuse of antibiotics, including tetracycline hydrochloride (TC), seriously threatens human health and ecosystems. In this work, magnetic carbon-coated cobalt oxide nanoparticles (CoO@C) were prepared by one-step annealing method and used as an adsorbent for efficient removal of TC from aqueous solution. The characteristic of the materials was studied by SEM, TEM, and XRD, revealing CoO nanoparticles (≤10 nm) were coated by carbon layer. Several influencial parameters, such as annealing temperature and pH on adsorption of TC, were explored, and found that the maximum adsorption capacity of CoO@C on TC reached as high as 769.43 mg g^-1. Furthermore, CoO@C displayed excellent stability and reusability. After four repeated use of the adsorbent, the adsorption capacity still remained at 90% of the initial capacity. The pseudo-second order model and Temkin model proved that it was an exothermic chemical adsorption process. Furthermore, after analysis of FT-IR, Zeta-potential, XPS, the positive charge on the surface of CoO@C forms a strong electrostatic interaction with TC, and in addition, a surface bond is formed between the adsorbent and the TC molecule. This work provides a novel and efficient adsorbent for the purification of TC-containing wastewater.