Bioethanol production from waste lignocelluloses: A review on microbial degradation potential

The Effect of Technological Conditions on ABE Fermentation and Butanol Production of Rye Straw and the Composition of Volatile Compounds

The objective of this study was to evaluate the effect of pretreatment and different technological conditions on the course of ABE fermentation of rye straw (RS) and the composition of volatile compounds in the distillates obtained. The highest concentration of ABE and butanol was obtained from the fermentation of pretreated rye straw by alkaline hydrolysis followed by detoxification and enzymatic hydrolysis. After 72 h of fermentation, the maximum butanol concentration, productivity, and yield from RS were 16.11 g/L, 0.224 g/L/h, and 0.402 g/g, respectively. Three different methods to produce butanol were tested: the two-step process (SHF), the simultaneous process (SSF), and simultaneous saccharification with ABE fermentation (consolidation SHF/SSF). The SHF/SSF process observed that ABE concentration (21.28 g/L) was higher than in the SSF (20.03 g/L) and lower compared with the SHF (22.21 g/L). The effect of the detoxification process and various ABE fermentation technologies on the composition of volatile compounds formed during fermentation and distillation were analyzed.

Thermophilic β-mannanases from bacteria: production, resources, structural features and bioengineering strategies

β-mannanases are pivotal enzymes that cleave the mannan backbone to release short chain mannooligosaccharides, which have tremendous biotechnological applications including food/feed, prebiotics and biofuel production. Due to the high temperature conditions in many industrial applications, thermophilic mannanases seem to have great potential to overcome the thermal impediments. Thus, structural analysis of thermostable β-mannanases is extremely important, as it could open up new avenues for genetic engineering, and protein engineering of these enzymes with enhanced properties and catalytic efficiencies. Under this scope, the present review provides a state-of-the-art discussion on the thermophilic β-mannanases from bacterial origin, their production, engineering and structural characterization. It covers broad insights into various molecular biology techniques such as gene mutagenesis, heterologous gene expression, and protein engineering, that are employed to improve the catalytic efficiency and thermostability of bacterial mannanases for potential industrial applications. Further, the bottlenecks associated with mannanase production and process optimization are also discussed. Finally, future research related to bioengineering of mannanases with novel protein expression systems for commercial applications are also elaborated.

Comparative analysis of Chrysoporthe cubensis exoproteomes and their specificity for saccharification of sugarcane bagasse

The phytopathogenic fungus Chrysoporthe cubensis is a relevant source of lignocellulolytic enzymes. This work aimed to compare the profile of lignocellulose-degrading proteins secreted by C. cubensis grown under semi-solid state fermentation using wheat bran (WB) and sugarcane bagasse (SB). The exoproteomes of the fungus grown in wheat bran (WBE) and sugarcane bagasse (SBE) were qualitative and quantitatively analyzed by liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS). Data are available via ProteomeXchange with identifier PXD046075. Label-free proteomic analysis of WBE and SBE showed that the fungus produced a spectrum of carbohydrate-active enzymes (CAZymes) with exclusive characteristics from each extract. While SBE resulted in an enzymatic profile directed towards the depolymerization of cellulose, the enzymes in WBE were more adaptable to the degradation of biomass rich in hemicellulose and other non-lignocellulosic polymers. Saccharification of alkaline pre-treated sugarcane bagasse with SBE promoted glucose release higher than commercial cocktails (8.11 g L-1), while WBE promoted the higher release of xylose (5.71 g L-1). Our results allowed an in-depth knowledge of the complex set of enzymes secreted by C. cubensis responsible for its high lignocellulolytic activity and still provided the identification of promising target proteins for biotechnological applications in the context of biorefinery.

The co-inoculation of Trichoderma viridis and Bacillus subtilis improved the aerobic composting efficiency and degradation of lignocellulose

The aim of this study was to reveal the mechanism by which co-inoculation with both Trichoderma viridis and Bacillus subtilis improved the efficiency of composting and degradation of lignocellulose in agricultural waste. The results showed that co-inoculation with Trichoderma and Bacillus increased abundance of Bacteroidota to promote the maturation 7 days in advance. Galbibacter may be a potential marker of co-inoculation composting efficiency compost. The compost became dark brown, odorless, and had a carbon to nitrogen ratio of 16.40 and a pH of 8.2. Moreover, Actinobacteriota and Firmicutes still dominated the degradation of lignocellulose following inoculation with Trichoderma or Bacillus 35 days after composting. Bacterial function prediction analysis showed that carbohydrate metabolism was the primary metabolic pathway. In conclusion, co-inoculation with Trichoderma and Bacillus shortened the composting cycle and accelerated the degradation of lignocellulose. These findings provide new strategies for the efficient use of agricultural waste to produce organic fertilizers.

Identification of Cellulose-Degrading Bacteria and Assessment of Their Potential Value for the Production of Bioethanol from Coconut Oil Cake Waste

Bioconversion of lignocellulosic biomass is a highly promising alternative to rapidly reduce reliance on fossil fuels and greenhouse gas emissions. However, the use of lignocellulosic biomass is limited by the challenges of efficient degradation strategies. Given this need, Bacillus tropicus (B. tropicus) with cellulose degradation ability was isolated and screened from rotten dahlia. The strain efficiently utilized coconut oil cake (COC) to secrete 167.3 U/mL of cellulase activity. Electron microscopy results showed significant changes in the structure and properties of cellulose after treatment with B. tropicus, which increased the surface accessibility and the efficiency of the hydrolysis process. The functional group modification observed by Fourier transform infrared spectroscopy indicated the successful depolymerization of COC. The X-ray diffraction pattern showed that the crystallinity index increased from 44.8% to 48.2% due to the hydrolysis of the amorphous region in COC. The results of colorimetry also reveal an efficient hydrolysis process. A co-culture of B. tropicus and Saccharomyces cerevisiae was used to produce ethanol from COC waste, and the maximum ethanol yield was 4.2 g/L. The results of this work show that B. tropicus can be used to prepare biotechnology value-added products such as biofuels from lignocellulosic biomass, suggesting promising utility in biotechnology applications.

Current status of metabolic engineering of microorganisms for bioethanol production by effective utilization of pentose sugars of lignocellulosic biomass

Lignocellulosic biomass, consisting of homo- and heteropolymeric sugars, acts as a substrate for the generation of valuable biochemicals and biomaterials. The readily available hexoses are easily utilized by microbes due to the presence of transporters and native metabolic pathways. But, utilization of pentose sugar viz., xylose and arabinose are still challenging due to several reasons including (i) the absence of the particular native pathways and transporters, (ii) the presence of inhibitors, and (iii) lower uptake of pentose sugars. These challenges can be overcome by manipulating metabolic pathways/glycosidic enzymes cascade by using genetic engineering tools involving inverse-metabolic engineering, ex-vivo isomerization, Adaptive Laboratory Evolution, Directed Metabolic Engineering, etc. Metabolic engineering of bacteria and fungi for the utilization of pentose sugars for bioethanol production is the focus area of research in the current decade. This review outlines current approaches to biofuel development and strategies involved in the metabolic engineering of different microbes that can uptake pentose for bioethanol production.

Structural alteration of cocoa bean shell fibers through biological treatment using Penicillium roqueforti

Lignocellulosic residues, such as cocoa bean shell (FI), are generated in large quantities during agro-industrial activities. Proper management of residual biomass through solid state fermentation (SSF) can be effective in obtaining value-added products. The hypothesis of the present work is that the bioprocess promoted by P. roqueforti can lead to structural changes in the fibers of the fermented cocoa bean shell (FF) that confer characteristics of industrial interest. To unveil such changes, the techniques of FTIR, SEM, XRD, TGA/TG were used. After SSF, an increase of 36.6% in the crystallinity index was observed, reflecting the reduction of amorphous components such as lignin in the FI residue. Furthermore, an increase in porosity was observed through the reduction of the 2θ angle, which gives the FF a potential candidate for applications of porous products. The FTIR results confirm the reduction in hemicellulose content after SSF. The thermal and thermogravimetric tests showed an increase in the hydrophilicity and thermal stability of FF (15% decomposition) in relation to the by-product FI (40% decomposition). These data provided important information regarding changes in the crystallinity of the residue, existing functional groups and changes in degradation temperatures.

Environment friendly emerging techniques for the treatment of waste biomass: a focus on microwave and ultrasonication processes

In the recent past, an increasing interest is mostly observed in using microwave and ultrasonic irradiation to aid the biological conversion of waste materials into value-added products. This study is focused on various individual impacts of microwaves and ultrasonic waves for the treatment of biomass before the synthesis of value-added products. Following, a comprehensive review of the mechanisms governing microwaves and ultrasonication as the treatment methods, their effects on biomass disruption, solubilization of organic matter, modification of the crystalline structure, enzymatic hydrolysis and production of reducing sugars was performed. However, based on the lab-scale experiments evaluated, microwaves and ultrasonication were studied to be economically and energetically ineffective despite their beneficial effects on the waste biomass. This article reviews some of the difficulties associated with using microwaves and ultrasonic irradiation for the efficient processing of waste biomasses and identified some potential directions for future study.

Galactomannan utilization by Cellvibrio japonicus relies on a single essential α-galactosidase encoded by the aga27A gene

Plant mannans are a component of lignocellulose that can have diverse compositions in terms of its backbone and side-chain substitutions. Consequently, the degradation of mannan substrates requires a cadre of enzymes for complete reduction to substituent monosaccharides that can include mannose, galactose, and/or glucose. One bacterium that possesses this suite of enzymes is the Gram-negative saprophyte Cellvibrio japonicus, which has 10 predicted mannanases from the Glycoside Hydrolase (GH) families 5, 26, and 27. Here we describe a systems biology approach to identify and characterize the essential mannan-degrading components in this bacterium. The transcriptomic analysis uncovered significant changes in gene expression for most mannanases, as well as many genes that encode carbohydrate active enzymes (CAZymes) when mannan was actively being degraded. A comprehensive mutational analysis characterized 54 CAZyme-encoding genes in the context of mannan utilization. Growth analysis of the mutant strains found that the man26C, aga27A, and man5D genes, which encode a mannobiohydrolase, α-galactosidase, and mannosidase, respectively, were important for the deconstruction of galactomannan, with Aga27A being essential. Our updated model of mannan degradation in C. japonicus proposes that the removal of galactose sidechains from substituted mannans constitutes a crucial step for the complete degradation of this hemicellulose.

Advances in technology and utilization of natural resources for achieving carbon neutrality and a sustainable solution to neutral environment

The greatest environmental issue of the twenty-first century is climate change. Human-caused greenhouse gas emissions are increasing the frequency of extreme weather. Carbon dioxide (CO₂) accounts for 80% of human greenhouse gas emissions. However, CO₂ emissions and global temperature have risen steadily from pre-industrial times. Emissions data are crucial for most carbon emission policymaking and goal-setting. Sustainable and carbon-neutral sources must be used to create green energy and fossil-based alternatives to reduce our reliance on fossil fuels. Near-real-time monitoring of carbon emissions is a critical national concern and cutting-edge science. This review article provides an overview of the many carbon accounting systems that are now in use and are based on an annual time frame. The primary emphasis of the study is on the recently created carbon emission and eliminating sources and technology, as well as the current application trends for carbon neutrality. We also propose a framework for the most advanced naturally available carbon neutral accounting sources capable of being implemented on a large scale. Forming relevant data and procedures will help the "carbon neutrality" plan decision-making process. The formation of pertinent data and methodologies will give robust database support to the decision-making process for the "carbon neutrality" plan for the globe. In conclusion, this article offers some opinions, opportunities, challenges and future perspectives related to carbon neutrality and carbon emission monitoring and eliminating resources and technologies.

The role of biofuels for sustainable MicrogridsF: A path towards carbon neutrality and the green economy

Today, with the progress of technology, the world is facing an increasing growth in power consumption. Since the fuel of most power plants is supplied from fossil fuels, it has caused an increase in global fossil fuel consumption and environmental degradation. ّFurthermore, the volatility of fossil fuel prices and unstable energy security have prompted international organizations and governments to apply policies to restrict fossil fuel use and examine alternatives to fossil fuels. Since biofuels come from renewable sources and are clean fuels, they can be an appropriate alternative to fossil fuels and play a more expansive role in supplying energy for transportation industries, power plants, and heat production systems. Although there is some research about the drawbacks of using fossil fuels and the commendation of using biofuels in various industries such as transportation, the literature lacks a comprehensive study on the evaluation and analysis of the potential of using biofuels instead of conventional fuels in power generation systems. The primary purpose of this study is to evaluate the impact of utilizing biofuels instead of fossil fuels in microgrids to achieve carbon neutrality objectives. Furthermore, this paper reviews previous research studies that have operated biofuels in three categories: solid, liquid, and gas, to generate electricity and analyzes the potential of different biofuels to produce heat and electricity for microgrid power systems. In addition to outlining the present knowledge gaps in this area, this study explores the prospects and threats associated with expanding the use of biofuels in the power production industry and the development of sustainable microgrids. This study indicated that if the technical and economic problems of employing biofuels are overcome, these clean fuels have a great potential to obtain the maximum share of the global power generation market and move toward Net Zero Emissions by 2050 Scenario (NZE) goals.

Physiological and transcriptome analyses of Kluyveromyces marxianus reveal adaptive traits in stress response

Kluyveromyces marxianus is a non-conventional yeast with outstanding physiological characteristics and a high potential for lignocellulosic ethanol production. However, achieving high ethanol productivity requires overcoming several biotechnological challenges due to the cellular inhibition caused by the inhibitors present in the medium. In this work, K. marxianus SLP1 was adapted to increase its tolerance to a mix of inhibitory compounds using the adaptive laboratory evolution strategy to study the adaptation and stress response mechanisms used by this non-Saccharomyces yeast. The fermentative and physiological parameters demonstrated that the adapted K. marxianus P8 had a better response against the synergistic effects of multiple inhibitors because it reduced the lag phase from 12 to 4 h, increasing the biomass by 40% and improving the volumetric ethanol productivity 16-fold than the parental K. marxianus SLP1. To reveal the effect of adaptation process in P8, transcriptome analysis was carried out; the result showed that the basal gene expression in P8 changed, suggesting the biological capability of K. marxianus to activate the adaptative prediction mechanism. Similarly, we carried out physiologic and transcriptome analyses to reveal the mechanisms involved in the stress response triggered by furfural, the most potent inhibitor in K. marxianus. Stress response studies demonstrated that P8 had a better physiologic response than SLP1, since key genes related to furfural transformation (ALD4 and ALD6) and stress response (STL1) were upregulated. Our study demonstrates the rapid adaptability of K. marxianus to stressful environments, making this yeast a promising candidate to produce lignocellulosic ethanol. KEY POINTS: • K. marxianus was adapted to increase its tolerance to a mix of inhibitory compounds • The basal gene expression of K. marxianus changed after the adaptation process • Adapted K. marxianus showed a better physiological response to stress by inhibitors • Transcriptome analyses revealed key genes involved in the stress response.

Identification, characteristics and rice growth promotion of a highly efficient cellulolytic bacterial strain, Cellulomonas iranensis ZJW-6, isolated from paddy soil in central China

The microbial degradation of lignocellulose is the best way to treat straw, which has a broad application prospect. It is consistent with the idea of agricultural sustainable development and has an important impact on the utilization of biomass resources. To explore and utilize the microbial resources of lignocellulose degradation, 27 lignocellulose degrading strains were screened from 13 regions in China. ZJW-6 was selected because of its 49.6% lignocellulose weight loss rate. According to the theoretical analysis of the experimental results, the following straw degradation conditions were obtained by ZJW-6: nitrogen source input of 8.45 g/L, a pH of 8.57, and a temperature of 31.63°C, the maximum weight loss rate of rice straw could reach 54.8%. It was concluded that ZJW-6 belonged to Cellulomonas iranensis according to 16S rRNA-encoding gene sequence comparison and identification. ZJW-6 is a Gram-positive bacterium that grows slowly and has a small yellowish green colony. To explain the degradation mechanism of lignocellulose, the experiment of enzymatic properties of the strain was prepared and carried out. It was discovered that ZJW-6 has an excellent ability to degrade cellulose, hemicellulose, and lignin, with cellulose and hemicellulose loss rates reaching almost 50% in 4 days and lignin loss rates reaching nearly 30%. Furthermore, ZJW-6 demonstrated lignocellulose degradation under aerobic and anaerobic conditions, indicating the strain's broad application potential. ZJW-6 was found to be more effective than ordinary humic acid in improving rice soil (available phosphorus, available nitrogen, organic matter) and promoting rice growth in a rice pot experiment (increasing root-shoot ratio, root activity, chlorophyll content and net photosynthetic rate). ZJW-6 plays an important role in promoting the development and utilization of straw resources. It has important significance for the advancement of green agriculture.

A comprehensive review on the biological conversion of lignocellulosic biomass into hydrogen: Pretreatment strategy, technology advances and perspectives

The globe has dependent on energy generation and utilization for many years; conversely, ecological concerns constrained the world to view hydrogen as an alternative for economic development. Lignocellulosic biomass is broadly accessible as a low-cost renewable feedstock and nonreactive nature; it has received a lot of consideration as a global energy source and the most attractive alternative to replace fossil natural substances for energy production. Pretreatment of lignocellulosic biomass is essential to advance its fragmentation and lower the lignin content for sustainable energy generation. This review's goal is to provide the different pretreatment strategies for enlarging the solubility and surface area of lignocellulosic biomass. The biological conversion of lignocellulosic biomass to hydrogen was reviewed and operational conditions and enhancing methods were discussed. This review summarizes the working conditions, parameters, yield percentages, techno-economic analysis, challenges, and future recommendations on the direct conversion of biomass to hydrogen.

Effects of Acremonium cellulase and heat-resistant lactic acid bacteria on lignocellulose degradation, fermentation quality, and microbial community structure of hybrid elephant grass silage in humid and hot areas

To better evaluate the effects of Acremonium cellulase (AC) and previously screened heat-resistant Lactobacillus plantarum 149 (LP149) on lignocellulose degradation, fermentation quality, and microbial community during ensiling in humid and hot areas, this study used a small-scale fermentation system to prepare hybrid elephant grass silage at 30 and 45°C, respectively. Compared to control and commercial inoculant Lactobacillus plantarum (LP), the addition of AC or strain LP149 decreased the contents of neutral detergent fiber, acid detergent fiber, and cellulose and increased the contents of glucose, fructose, and sucrose during fermentation. Furthermore, AC and LP149 treatments altered the microbial communities' structure during ensiling. AC treatment provided more substrate for microbial fermentation, resulting in an increase in bacterial alpha diversity. LP149 treatment increased the Lactobacillus abundance and optimized the bacterial community compositions. In addition, AC and LP149 treatments had higher (P < 0.05) lactic acid and acetic acid contents and lower (P < 0.05) pH, butyric acid, and NH3-N levels compared to the control. These results indicated that AC and strain LP149 are promising silage additives that can promote lignocellulose degradation and improve the fermentation quality of hybrid elephant grass in humid and hot areas.

Impacts of composting duration on physicochemical properties and microbial communities during short-term composting for the substrate for oyster mushrooms

A short-term composting process to prepare substrate is an effective way to cultivate oyster mushrooms (Pleurotus spp.), which can increase the yield of mushrooms and lower the rate of contamination in non-industrialized cultivation. Moreover, it is different from the traditional composting processes for fertilizers and lacks systematic study, such as microbial succession and compost quality. In this study, a series of different tests of composting duration (0, 2, 4 and 5 d) were performed. A composting duration of 4-5 d over 58 °C was suitable for mushroom cultivation based on the biological efficiency (BE) range of 69.76-73.41 % and the contamination rate of 0 %. The content of total carbon (TC) continuously decreased during composting, while the content of total nitrogen (TN) reacted in an opposite matter. The final TN and C/N ratios were 1.89 % and 28/1, respectively, which fell well within the optimal range of nutritional requirements for oyster mushroom cultivation. The composting bacteria were more diverse than the fungal species. Caldibacillus, Thermobispora, Thermopolyspora, Thermobacillus and Ureibacillus were the predominant bacterial genera during the thermophilic stage. Co-occurrence patterns of microbial communities and physicochemical properties were performed using a network analysis, which indicated that bacteria can play more efficient roles than fungi in the degradation of organic matter. The structural equation model showed that composting duration significantly affected bacterial diversity, lignocellulose degradation rates, and BE. The correlations between bioinformatics parameters with composting characters and agronomic traits were determined by the Mantel test and showed that the induction of bacterial diversity over time rapidly activated carbon metabolism during short-term composting. This study provides a new idea of agro-waste composting for mushroom cultivation.

Potential of lignocellulose degrading microorganisms for agricultural residue decomposition in soil: A review

Lignocellulosic crop residues (LCCRs) hold a significant share of the terrestrial biomass, estimated at 5 billion Mg per annum globally. A massive amount of these LCCRs are burnt in many countries resulting in immense environmental pollution; hence, its proper disposal in a cost-effective and eco-friendly manner is a significant challenge. Among the different options for management of LCCRs, the use of lignocellulose degrading microorganisms (LCDMOs), like fungi and bacteria, has emerged as an eco-friendly and effective way for its on-site disposal. LCDMOs achieve degradation through various mechanisms, including multiple supportive enzymes, causing oxidative attacks by which recalcitrance of lignocellulose material is reduced, paving the way to further activity by depolymerizing enzymes. This improves the physical properties of soil, recycles plant nutrients, promotes plant growth and thus helps improve productivity. Rapid and proper microbial degradation may be achieved through the correct combination of the LCDMOs, supplementing nutrients and controlling different factors affecting microbial activity in the field. The review is a critical discussion of previous studies revealing the potential of individuals or a set of LCDMOs, factors controlling the rate of degradation and the key researchable areas for better understanding of the role of these decomposers for future use.

Screening of cellulose-degrading yeast and evaluation of its potential for degradation of coconut oil cake

Coconut oil cake (COC), a byproduct of oil extraction, contains high levels of cellulose. The aim of this study was to isolate a cellulose-degrading yeast from rotten dahlia that can effectively use COC as the only carbon source for cellulase secretion. Based on screening, Meyerozyma guillermondii CBS 2030 (M. guillermondii) was identified as a potential candidate, with the highest cellulolytic activity among the yeast strains isolated, with the carboxymethyl cellulase (CMCase) activity reaching 102.96 U/mL on day 5. The cellulose in COC samples was evaluated before and after degradation by M. guillermondii. Analysis based on field emission scanning electron microscopy (FESEM) revealed that the COC structure was changed significantly during the treatment, indicating effective hydrolysis. Fourier transform infrared spectroscopy (FTIR) of the modified functional groups indicated successful depolymerization of coconut cake. X-ray diffraction (XRD) and analysis of color differences established effective degradation of COC by M. guillermondii. The results demonstrate that M. guillermondii effectively secretes CMCase and degrades cellulose, which has important practical significance in COC degradation.

Fusarium graminearum as a producer of xylanases with low cellulases when grown on wheat bran

•

Endophytic fungi of cacao had important xylanase activity when grown on wheat bran.

•

F. graminearum strain Ec220 produced xylanases with low cellulolytic activity.

•

Xylanase production was optimized using response surface methodology.

•

Proteomic analysis revealed similarities with previously reported xylanases.

The xylanolytic potential of endophytic fungi isolated from leaves of Theobroma cacao was explored for the first time. Four fungal strains showed significant amounts of xylanase activity and low cellulase levels when grown on wheat bran as the sole carbon source. Strain Ec220 of Fusarium graminearum had the highest xylanase production (1.79 U/ml), whereas its cellulase activity was minimal (0.24 U/ml). Optimal conditions for xylanase production were: 154 h of incubation time, pH 5.79 and 29.8 °C. Furthermore, two protein spots detected by two-dimensional gel electrophoresis showed molecular weights (26.05 and 27.70 kDa) and isoelectric points (6.18 and 9.20) corresponding to previously reported F. graminearum xylanases, Xyl A and Xyl B, respectively. Therefore, endophytic fungi of T. cacao can be an important source of xylanolytic activities when cultured on wheat bran, and xylanases with low cellulases found in strain Ec220 require further characterization as they show promise for possible industrial applications.

Biohydrogen and Methane Production from Sugarcane Leaves Pretreated by Deep Eutectic Solvents and Enzymatic Hydrolysis by Cellulolytic Consortia

This study determined the optimal conditions for the deep eutectic solvent (DES) pretreatment of sugarcane leaves and the best fermentation mode for hydrogen and methane production from DES-pretreated sugarcane leaves. Choline chloride (ChCl):monoethanolamine (MEA) is the most effective solvent for removing lignin from sugarcane leaves. The optimum conditions were a ChCl: MEA molar ratio of 1:6, 120 °C, 3 h, and substrate-to-DES solution ratio of 1:12. Under these conditions, 86.37 ± 0.36% lignin removal and 73.98 ± 0.42% hemicellulose removal were achieved, whereas 84.13 ± 0.77% cellulose was recovered. At a substrate loading of 4 g volatile solids (VS), the simultaneous saccharification and fermentation (SSF) and separate hydrolysis and fermentation (SHF) processes yielded maximum hydrogen productions of 3187 ± 202 and 2135 ± 315 mL H2/L, respectively. In the second stage, methane was produced using the hydrogenic effluent. SSF produced 5923 ± 251 mL CH4/L, whereas SHF produced 3583 ± 128 mL CH4/L. In a one-stage methane production process, a maximum methane production of 4067 ± 320 mL CH4/L with a substrate loading of 4 g VS was achieved from the SSF process. SSF proved to be more efficient than SHF for producing hydrogen from DES-pretreated sugarcane leaves in a two-stage hydrogen and methane production process as well as a one-stage methane production process.

Metabolome analysis of the response and tolerance mechanisms of Saccharomyces cerevisiae to formic acid stress

Various inhibitors are produced during the hydrolysis of lignocellulosic biomass that can interfere with the growth of yeast cells and the production of bioethanol. Formic acid is a common weak acid inhibitor present in lignocellulosic hydrolysate that has toxic effects on yeast cells. However, the mechanism of the response of Saccharomyces cerevisiae to formic acid is not fully understood. In this study, liquid chromatography-mass spectrometry (LC-MS) was used to investigate the effects of formic acid treatment on cell metabolites of S. cerevisiae. Treatment with different concentrations of formic acid significantly inhibited the growth of yeast cells, reduced the yield of ethanol, prolonged the cell fermentation cycle, and increased the content of malondialdehyde. Principal component analysis and orthogonal partial least squares discriminant analysis showed that 55 metabolites were significantly altered in S. cerevisiae after formic acid treatment. The metabolic relevance of these compounds in the response of S. cerevisiae to formic acid stress was investigated. Formic acid can cause oxidative stress, inhibit protein synthesis, and damage DNA in S. cerevisiae, and these are possible reasons for the inhibition of S. cerevisiae cell growth. In addition, the levels of several aromatic amino acids identified in the cells of formic acid-treated yeast were increased; the biosynthesis of nucleotides was slowed, and energy consumption was reduced. These mechanisms may help to improve the tolerance of yeast cells to formic acid. The results described herein highlight our current understanding of the molecular mechanism of the response of S. cerevisiae to formic acid. The study will provide a theoretical basis for research on the tolerance mechanisms of S. cerevisiae.

From pomiculture waste to biotechnological raw material: efficient transformation using ligninosomes and cellulosomes from Pleurotus spp

The goal of this study was to determine the capacity of Pleurotus spp. lignocellulosome to transform frequent pomiculture residues (grapevine-, plum-, and raspberry sawdust) into raw materials for biotechnological processes. All three lignocellulosics induced the synthesis of ligninolytic and cellulolytic enzymes in the tested species. Laccase was dominant in the ligninolytic cocktail, with a maximum activity of 40,494.88 U L-1 observed after the cultivation of P. pulmonarius on grapevine sawdust. Grapevine sawdust also proved to be the optimal substrate for the synthesis of versatile peroxidases especially in P. eryngii (1010.10 U L-1), while raspberry sawdust favored the production of Mn-dependent peroxidase in P. pulmonarius (479.17 U L-1). P. pulmonarius was the dominant cellulolytic agent and raspberry sawdust was optimal for the synthesis of xylanases, and endo- and exo-cellulases (15,746.35 U L-1, 9741.56 U L-1, and 836.62 U L-1), while grapevine sawdust mostly induced β-glucosidase activity (166.11 U L-1). The degree of residues delignification was more substrate- than species-dependent, ranging between 6.44 and 23.72% after the fermentation of grapevine and raspberry sawdust with P. pulmonarius. On the other hand, the lowest level of cellulose consumption was also observed on raspberry sawdust after the cultivation of P. eryngii, which together with high delignification also induced the highest selectivity index (1.27). The obtained results show the exceptional lignocellulolytic potential of Pleurotus spp. enzyme cocktails which opens up many possibilities for their application in numerous biotechnological processes.

Transcriptome Mining Provides Insights into Cell Wall Metabolism and Fiber Lignification in Agave tequilana Weber

Resilience of growing in arid and semiarid regions and a high capacity of accumulating sugar-rich biomass with low lignin percentages have placed Agave species as an emerging bioenergy crop. Although transcriptome sequencing of fiber-producing agave species has been explored, molecular bases that control wall cell biogenesis and metabolism in agave species are still poorly understood. Here, through RNAseq data mining, we reconstructed the cellulose biosynthesis pathway and the phenylpropanoid route producing lignin monomers in A. tequilana, and evaluated their expression patterns in silico and experimentally. Most of the orthologs retrieved showed differential expression levels when they were analyzed in different tissues with contrasting cellulose and lignin accumulation. Phylogenetic and structural motif analyses of putative CESA and CAD proteins allowed to identify those potentially involved with secondary cell wall formation. RT-qPCR assays revealed enhanced expression levels of AtqCAD5 and AtqCESA7 in parenchyma cells associated with extraxylary fibers, suggesting a mechanism of formation of sclerenchyma fibers in Agave similar to that reported for xylem cells in model eudicots. Overall, our results provide a framework for understanding molecular bases underlying cell wall biogenesis in Agave species studying mechanisms involving in leaf fiber development in monocots.

Recent advances in metabolic engineering of microorganisms for advancing lignocellulose-derived biofuels

Combating climate change and ensuring energy supply to a rapidly growing global population has highlighted the need to replace petroleum fuels with clean, and sustainable renewable fuels. Biofuels offer a solution to safeguard energy security with reduced ecological footprint and process economics. Over the past years, lignocellulosic biomass has become the most preferred raw material for the production of biofuels, such as fuel, alcohol, biodiesel, and biohydrogen. However, the cost-effective conversion of lignocellulose into biofuels remains an unsolved challenge at the industrial scale. Recently, intensive efforts have been made in lignocellulose feedstock and microbial engineering to address this problem. By improving the biological pathways leading to the polysaccharide, lignin, and lipid biosynthesis, limited success has been achieved, and still needs to improve sustainable biofuel production. Impressive success is being achieved by the retouring metabolic pathways of different microbial hosts. Several robust phenotypes, mostly from bacteria and yeast domains, have been successfully constructed with improved substrate spectrum, product yield and sturdiness against hydrolysate toxins. Cyanobacteria is also being explored for metabolic advancement in recent years, however, it also remained underdeveloped to generate commercialized biofuels. The bacterium Escherichia coli and yeast Saccharomyces cerevisiae strains are also being engineered to have cell surfaces displaying hydrolytic enzymes, which holds much promise for near-term scale-up and biorefinery use. Looking forward, future advances to achieve economically feasible production of lignocellulosic-based biofuels with special focus on designing more efficient metabolic pathways coupled with screening, and engineering of novel enzymes.

Four stroke diesel engine performance and emission studies of ethanol recovered from Kappaphycus alvarezii reject -solid food waste mixed substrates and its blends

Bioethanol is an eco-friendly green fuel, owing to its production from sustainable bio-based sources. In this study, bioethanol (BE) is produced from Kappaphycus alverezii reject (KR) blended with Solid Food Waste (SFW). This bioethanol is blended with petroleum-based diesel (PBD) in the following proportions: 15%, 20% and 25% for further studies. Performance characteristics, specifically Brake Specific Fuel Consumption (BSFC), Brake Thermal Efficiency (BTE), Brake Power (BP) and exhaust emissions, mainly Carbon monoxide (CO), Carbon dioxide (CO₂), Smoke Opacity (SO), hydrocarbons (HC) and oxides of Nitrogen (NO_X) have been investigated. The blended test fuels show better results, which is confirmed by the performance characteristics of BTE being lower than PBD. The emission report shows lesser CO (0.12%) and SO (59.6%) compared to PBD (0.14% and 67.2%), signifying the clean-burning tendency of BE blends. From the findings, PBD75: BE25 is an excellent fuel blend for improving flow properties, engine performance, and emission characteristics.

Sustainable bioconversion of potato peel wastes into ethanol and biogas using organosolv pretreatment

Potato processing industries generate considerable amounts of residues, i.e., potato peel wastes (PPW). Valorization of PPW for bioethanol and biogas production via a biorefining process was investigated in this study. Organosolv pretreatment was performed on the PPW using 50-75% (v/v) ethanol solution at 120-180 °C with/without the presence of 1% (w/w) H₂SO₄ (as a catalyst). After the pretreatment, the solvent, i.e., ethanol, was recovered by distillation. Catalyzed organosolv pretreatment using 50% (v/v) ethanol at 120 °C followed by enzymatic hydrolysis resulted in a high hydrolysate yield of 539.8 g glucose/kg dry PPW that was successfully fermented to 224.2 g ethanol/kg dry PPW. To recover more energy, the liquid fraction of the pretreatment remained after solvent recovery and the unhydrolyzed solids that remained from the enzymatic hydrolysis were anaerobically digested. From each kg of dry PPW, the anaerobic digestion produced 57.9 L biomethane. Thus, the biorefinery comprising ethanolic organosolv pretreatment, solvent recovery, enzymatic hydrolysis, ethanolic fermentation, and anaerobic digestion of residues was produced 8112 kJ energy per kg of dry PPW.

Pineapple Waste Cell Wall Sugar Fermentation by Saccharomyces cerevisiae for Second Generation Bioethanol Production

Agricultural food waste is rich in cellulosic and non-cellulosic fermentable substance. In this study, we investigated the bioconversion of pineapple waste cell wall sugars into bioethanol by simultaneous saccharification and fermentation using Saccharomyces cerevisiae ATCC 4126. Soluble and insoluble cell wall sugars were investigated during the fermentation process. Moreover, the fermentation medium was investigated for protein, moisture, ash, lignin and glycerol determinations with a particular focus on the increase in single cell protein due to yeast growth, allowing a total valorization of the resulting fermentation medium, with no further waste production, with respect to environmental sustainability. Soluble and insoluble sugars in the starting material were 32.12% and 26.33% respectively. The main insoluble sugars resulting from the cell wall hydrolysis detected at the beginning of the fermentation, were glucose, xylose and uronic acid. Glucose and mannose were the most prevalent sugars in the soluble sugars fraction. The ethanol theoretical yield, calculated according to dry matter lost, reached up to 85% (3.9% EtOH). The final fermentation substrate was mainly represented by pentose sugars. The protein content increased from 4.45% up to 20.1% during the process.

Separation of Lignocellulose and Preparation of Xylose from Miscanthus lutarioriparius with a Formic Acid Method

Efficient component separation technology is one of the key ways to improve the efficiency of lignocellulose bioconversion. In this study, the formic acid method was used to separate the components of lignocellulose from Miscanthus lutarioriparius, hemicellulose was degraded into xylose simultaneously, and the composition and structure of the separated components were analyzed. Then, xylose was further purified with activated carbon for decolorization and resins for the removal of formic acid and other monosaccharide impurities. The results showed that formic acid could effectively separate the cellulose, hemicellulose, and lignin of lignocellulose with recoveries of 91.7%, 80.2%, and 85.3%, respectively. Structural analyses revealed that the cellulose and lignin underwent different degrees of formylation during the formic acid treatment, yet their primary structures remained intact, and the crystallinity of cellulose increased significantly. By GC–MS and HPLC analysis, xylose was the main component of hemicellulose extract, accounting for 74.90%. The activated carbon treatment decolorized the xylose extract more than 93.66% and gave a xylose recovery of 88.58%. D301 resin could effectively remove more than 99% of the formic acid residue in xylose. The xylose extract was further purified by removing arabinose and other monosaccharide impurities with Dowex 50wx4 resin, which increased the purity to 95%. The results demonstrated that the formic acid method is an effective method to separate lignocellulose and prepare xylose, and it has broad application prospects in the field of bio-refining lignocellulose resources such as Miscanthus lutarioriparius

Recent advances and sustainable development of biofuels production from lignocellulosic biomass

Many countries in the world are facing the demand for non-renewable fossil fuels because of overpopulation and economic boom. To reduce environmental pollution and zero carbon emission, the conversion of biomass into biofuels has paid better attention and is considered to be an innovative approach. A diverse raw material has been utilized as feedstock for the production of biofuel, depending on the availability of biomass, cost-effectiveness, and their geographic location. Among the different raw materials, lignocellulosic biomass has fascinated many researchers around the world. The current review discovers the potential application of lignocellulosic biomass for the production of biofuels. Various pretreatment methods have been widely used to increase the hydrolysis rate and accessibility of biomass. This review highlights recent advances in pretreatment methodologies for the enhanced production of biofuels. Detailed descriptions of the mechanism of biomass processing pathway, optimization, and modeling study have been discussed.

State of art of valorising of diverse potential feedstocks for the production of alcohols and ethers: Current changes and perspectives

Alcohols could be the biggest factor for the improvement of world biofuel economy in the present century due to their excellent properties compared to petroleum products. The primary concerns of sustainable alcohol production for meeting the growing energy demand owing to the selection of viable feedstock and this might enhance the opportunities for developing numerous advanced techniques. In this review, the valorization of alcohol production from several production routes has been exposed by covering the traditional routes to the present state of the art technologies. Even though the fossil fuel conversion could be dominant method for methanol production, many recent innovations like photo electrochemical synthesis and electrolysis methods might play vital role in production of renewable methanol in future. There have been several production routes for production of ethanol and among which the fermentation of lignocellulose biomass would be the ultimate choice for large scale shoot up. The greenhouse gas recovery in the form of alcohols through electrochemistry technique and hydrogenation method are the important methods for commercialization of alcohols in future. It is also observed that algae based renewable bio-alcohols is highly influenced by carbohydrate content and sustainable approaches in algae conversion to bio-alcohols would bring greater demand in future market. There is a lack of innovation in higher alcohols production in single process and this could be bounded by combining dehydrogenation and decarboxylation techniques. Finally, this review enlists the opportunities and challenges of existing alcohols production and recommended the possible routes for making significant enhancement in production.

Mathematical Modelling of Bioethanol Production from Raw Sugar Beet Cossettes in a Horizontal Rotating Tubular Bioreactor

Alternative to the use of fossil fuels are biofuels (e.g., bioethanol, biodiesel and biogas), which are more environmentally friendly and which can be produced from different renewable resources. In this investigation, bioethanol production from raw sugar beet cossettes (semi-solid substrate) by yeast Saccharomyces cerevisiae in a horizontal rotating tubular bioreactor (HRTB) was studied. Obtained results show that HRTB rotation mode (constant or interval) and rotation speed have considerable impact on the efficiency of bioethanol production in the HRTB. The main goal of this research was to develop a non-structural mathematical model of bioethanol production from raw sugar beet cossettes in the HRTB. The established mathematical model of bioethanol production in the HRTB describes substrate utilization and product formation (glycerol, ethanol and acetate) and presumes negative impact of high substrate concentration on the working microorganism (substrate inhibition) by using Andrews inhibition kinetics. All simulations of bioethanol production in the HRTB were performed by using Berkeley Madonna software, version 8.3.14 (Berkeley Madonna, Berkeley, CA, USA). The established non-structural bioprocess model describes relatively well the bioethanol production from raw sugar beet cossettes in the HRTB.

Development and characterization of efficient xylose utilization strains of Zymomonas mobilis

BACKGROUND

Efficient use of glucose and xylose is a key for the economic production of lignocellulosic biofuels and biochemicals, and different recombinant strains have been constructed for xylose utilization including those using Zymomonas mobilis as the host. However, the xylose utilization efficiency still needs to be improved. In this work, the strategy of combining metabolic engineering and adaptive laboratory evolution (ALE) was employed to develop recombinant Z. mobilis strains that can utilize xylose efficiently at high concentrations, and NGS-based genome resequencing and RNA-Seq transcriptomics were performed for strains evolved after serial transfers in different media to understand the impact of xylose and differences among strains with different xylose-utilization capabilities at molecular level.

RESULTS

Heterologous genes encoding xylose isomerase and xylulokinase were evaluated, which were then introduced into xylose-utilizing strain Z. mobilis 8b to enhance its capacity of xylose utilization. The results demonstrated that the effect of three xylose isomerases on xylose utilization was different, and the increase of copy number of xylose metabolism genes can improve xylose utilization. Among various recombinant strains constructed, the xylose utilization capacity of the recombinant strain 8b-RsXI-xylB was the best, which was further improved through continuous adaption with 38 transfers over 100 days in 50 g/L xylose media. The fermentation performances of the parental strain 8b, the evolved 8b-S38 strain with the best xylose utilization capability, and the intermediate strain 8b-S8 in different media were compared, and the results showed that only 8b-S38 could completely consume xylose at 50 g/L and 100 g/L concentrations. In addition, the xylose consumption rate of 8b-S38 was faster than that of 8b at different xylose concentrations from 50 to 150 g/L, and the ethanol yield increased by 16 ~ 40%, respectively. The results of the mixed-sugar fermentation also demonstrated that 8b-S38 had a higher xylose consumption rate than 8b, and its maximum ethanol productivity was 1.2 ~ 1.4 times higher than that of 8b and 8b-S8. Whole-genome resequencing identified three common genetic changes in 8b-S38 compared with 8b and 8b-S8. RNA-Seq study demonstrated that the expression levels of genes encoding chaperone proteins, ATP-dependent proteases, phage shock proteins, ribosomal proteins, flagellar operons, and transcriptional regulators were significantly increased in xylose media in 8b-S38. The up-regulated expression of these genes may therefore contribute to the efficient xylose utilization of 8b-S38 by maintaining the normal cell metabolism and growth, repairing cellular damages, and rebalancing cellular energy to help cells resist the stressful environment.

CONCLUSIONS

This study provides gene candidates to improve xylose utilization, and the result of expressing an extra copy of xylose isomerase and xylulokinase improved xylose utilization also provides a direction for efficient xylose-utilization strain development in other microorganisms. In addition, this study demonstrated the necessity to combine metabolic engineering and ALE for industrial strain development. The recombinant strain 8b-S38 can efficiently metabolize xylose for ethanol fermentation at high xylose concentrations as well as in mixed sugars of glucose and xylose, which could be further developed as the microbial biocatalyst for the production of lignocellulosic biofuels and biochemicals.

Optimisation of enzymatic saccharification of wheat straw pre-treated with sodium hydroxide

To enhance the reducing sugar yield in enzymatic hydrolysis, various factors (NaOH concentration, solid content and pre-treatment time) that affect the pre-treatment process were investigated and evaluated based on the reducing sugar yield of the subsequent enzymatic hydrolysis. The enzymatic hydrolysis was based on the cellulase from Trichoderma reesi ATCC 26921, the optimum NaOH pre-treatment conditions were an NaOH concentration of 1.0% (w/w), a solid content of 5.0% (w/v) and a pre-treatment time of 60 min. Various parameters that affect the enzymatic hydrolysis of wheat straw, including the solid content, enzyme loading, pH and hydrolysis time, were investigated and optimized through a Box–Behnken design and response surface methodology. The predicted optimum conditions for enzymatic hydrolysis were a solid content of 8.0% (w/v), an enzyme loading of 35 FPU/g substrate, a temperature of 50 °C, a pH of 5.3 and a hydrolysis time of 96 h. The experimental result showed that the maximum reducing sugar yield was 60.73% (53.35% higher than the wheat straw without NaOH pre-treatment), which is in accordance with the predicted conditions.

Management of microbial enzymes for biofuels and biogas production by using metagenomic and genome editing approaches

Non-renewable fossil fuels such as bitumen, coal, natural gas, oil shale, and petroleum are depleting over the world owing to unrestricted consumption. Biofuels such as biodiesel, biobutanol, bioethanol, and biogas are considered an eco-friendly and cost-effective alternatives of fossil fuels. For energy sustainability, the production of advanced biofuels is required. The advancement of genetic and metabolic engineering in microbial cells played a significant contribution to biofuels overproduction. Essential approaches such as next-generation sequencing technologies and CRISPR/Cas9-mediated genome editing of microbial cells are required for the mass manufacture of biofuels globally. Advanced "omics" approaches are used to construct effective microorganisms for biofuels manufacturing. A new investigation is required to augment the production of lignocellulosic-based biofuels with minimal use of energy. Advanced areas of metabolic engineering are introduced in the manufacture of biofuels by the use of engineered microbial strains. Genetically modified microorganisms are used for the production of biofuels in large quantities at a low-cost.

Succession of the microbial communities and function prediction during short-term peach sawdust-based composting

Short-term composting of raw materials for preparing oyster mushroom cultivation media is widely used in China, and its microbial mechanism needs to be further studied. 11-days' peach sawdust-based composting was performed to evaluate material conversion and microbial succession using physicochemical analysis and 16S rRNA and ITS sequencing. Composting bacteria demonstrated much higher abundance than fungi. Firmicutes, Actinobacteriota, and Proteobacteria were the dominant bacterial phyla, while most of fungal species belonged to Ascomycota. Moisture was the key factor at the beginning, while total nitrogen, temperature, and lignin became main influencing factors for composting maturity. Actinobacteriota, Firmicutes, and Proteobacteria of bacterial phyla, Eurotiomycetes and Sordariomycetes of fungal classes involved in lignocellulosic degradation. Bacterial function prediction analysis showed that carbohydrate metabolism and amino acid metabolism were the main metabolic pathways. These results confer a better understanding of material and microbial succession during short-term composting and also provide valuable utilization in mushroom industry.

Characterization and evaluation of a natural derived bacterial consortium for efficient lignocellulosic biomass valorization

A consortium (HPP) with improved ability in biomass conversion was achieved by adjusting the proportion of Pseudoxanthomonas taiwanensis in a natural consortium (HP), but the mechanism behind was unknown. Herein, the diversities of microbial community structure and gene functions of the consortia were analyzed first, and found that HPP had a more balanced microbial structure with enriched gene pathways related to cellular processes, environmental information processing and metabolism. Then, key genes responsible for biomass conversion were further analyzed, finding that their abundance and distribution contributed to HPP's efficient biomass conversion. Finally, consolidated bioprocessing of agricultural wastes by HPP was carried out to verify its enhanced ability, and ethanol with the highest yield that was ever reported was achieved at 0.28 g/g. This is the first study which reported the underlying mechanisms for synergistic effects of microbial consortia, and will guide the artificial construction of complex microbial consortium for specific purpose.

Optimizing lime pretreatment of rice straw for biolipid production using oleaginous microorganisms

This work focuses on the lime pretreatment of rice straw, agricultural waste in northeast Vietnam, for microbial lipid (bio-lipid) production. A response surface methodology approach was performed to optimize parameters for the pretreatment process. These parameters are the concentration of Ca(OH)₂, hydrolysis temperature, and maintained time; the effect is considered bio-lipid production yield. The lipid yield was estimated through consolidated bioprocessing of the pretreated rice straw as a substrate and using the fungus strain (Aspergillus oryzae 32) and the yeast strain (Lipomyces starkeyi 22). As a result, the optimal pretreatment conditions for maximum lipid yield were obtained at Ca(OH)₂ concentration of 12 g/L and hydrolysis temperature of 110 °C within 60 min. The accumulated lipid in fermentation using these oleaginous microorganisms was 8.5g/100g oven-dry weight of rice straw (10.9g/100g for pretreated rice straw). The biolipid consisted of 42.6% saturated, 21.1% monounsaturated (MUFA), and 35.1% polyunsaturated (PUFA) fatty acids.

Bioethanol Production by Enzymatic Hydrolysis from Different Lignocellulosic Sources

As the need for non-renewable sources such as fossil fuels has increased during the last few decades, the search for sustainable and renewable alternative sources has gained growing interest. Enzymatic hydrolysis in bioethanol production presents an important step, where sugars that are fermented are obtained in the final fermentation process. In the process of enzymatic hydrolysis, more and more new effective enzymes are being researched to ensure a more cost-effective process. There are many different enzyme strategies implemented in hydrolysis protocols, where different lignocellulosic biomass, such as wood feedstocks, different agricultural wastes, and marine algae are being used as substrates for an efficient bioethanol production. This review investigates the very recent enzymatic hydrolysis pathways in bioethanol production from lignocellulosic biomass.

A review on the environment-friendly emerging techniques for pretreatment of lignocellulosic biomass: Mechanistic insight and advancements

The process of pretreatment is considered as an indispensable unit operation in the field of lignocellulosic conversion. The traditional pretreatment operations of lignocellulosic biomass are observed as inefficient to meet the demand for an industrial adaptation. In view of that, numerous investigations are reported on various conventional pretreatment methods but very limited information's are available on the advanced technologies. The present review article provides an exclusive discussion on various emerging and environment-friendly pretreatment methods applied on a number of different feedstock materials. Further, an insight on the reaction mechanism involved with each of the technologies such as microwave, ultrasound, deep eutectic solvent, irradiation, and high force assisted pretreatment methods are elucidated for an effective valorization of lignocellulosic biomass. Hence, in a single article, the readers of this paper will get to know all important aspects of the emerging pretreatment techniques of lignocellulosic biomass including the advancements, and the mechanistic insight which will be highly beneficial towards the selection of an efficient pretreatment method for large scale of commercial implementation in a lignocellulosic biorefinery.

Potential of Brewer's Spent Grain as a Potential Replacement of Wood in pMDI, UF or MUF Bonded Particleboard

Brewer’s spent grain (BSG) is the richest by-product (85%) of the beer-brewing industry, that can be upcycled in a plentiful of applications, from animal feed, bioethanol production or for removal of heavy metals from wastewater. The aim of this research is to investigate the mechanical, physical and structural properties of particleboard manufactured with a mixture of wood particles and BSG gradually added/replacement in 10%, 30% and 50%, glued with polymeric diisocyanate (pMDI), urea-formaldehyde (UF) and melamine urea-formaldehyde (MUF) adhesives. The density, internal bond, modulus of rupture, modulus of elasticity, screw withdrawal resistance, thickness swelling and water absorption were tested. Furthermore, scanning electron microscopy anaylsis was carried out to analyze the structure of the panels after the internal bond test. Overall, it was shown that the adding of BSG decreases the mechanical performance of particleboard, due to reduction of the bonding between wood and BSG particles. This decrease has been associated with the structural differences proven by SEM inspection. Interaction of particles with the adhesive is different for boards containing BSG compared to those made from wood. Nevertheless, decrease in the mechanical properties was not critical for particleboards produced with 10% BSG which could be potentially classified as a P2 type, this means application in non-load-bearing panel for interior use in dry conditions, with high dimensional stability and stiffness.

Microalgae starch: A promising raw material for the bioethanol production

Ethanol is currently the most successful biofuel and can be produced from microalgal biomass (third-generation). Ethanol from microalgal biomass has advantages because it does not use arable land and reduces environmental impacts through the sequestration of CO₂ from the atmosphere. In this way, micro and macroalgal starch, which is structurally similar to that from higher plants can be considered a promise raw material for the production of bioethanol. Thus, strategies can be used to intensify the carbohydrate concentration in the microalgal biomass enabling the production of third-generation bioethanol. The microalgae biomass can be destined to biorefineries so that the residual biomass generated from the extraction processes is used for the production of high value-added products. Therefore, the process will have an impact on reducing the production costs and the generation of waste. In this context, this review aims to bring concepts and perspectives on the production of third-generation bioethanol, demonstrating the microalgal biomass potential as a carbon source to produce bioethanol and supply part of the world energy demand. The main factors that influence the microalgal cultivation and fermentation process, as well as the processes of transformation of biomass into the easily fermentable substrate are also discussed.

Bioenergy from biofuel residues and waste

This article is a review of the scientific literature published in 2019 on topics relating to bioenergy from biofuel residues and waste. This literature review is divided into the following sections: Feedstocks, Biodiesel, Bioethanol, Hydrogen, Biohydrogen, Biofuel Residues, Microalgae, and Lignocelluloses.

Impact of hydrothermal pretreatment on anaerobic digestion efficiency for lignocellulosic biomass: Influence of pretreatment temperature on the formation of biomass-degrading byproducts

Anaerobic digestion (AD) of lignocellulosic biomass is appealing because of the abundance and ease of obtaining the biomass locally. However, the recalcitrance of lignocellulosic biomass presents an obstacle in the hydrolysis step of AD and lowers the process efficiency. In this study, sunflower, which is a model lignocellulosic biomass, was pretreated by thermal (hydrothermal pretreatment, HTP) and non-thermal (milling) methods; the methane yield and biodegradability of the pretreated biomass were determined using a series of batch tests. The thermal pretreatment method showed a significantly higher methane yield (213.87-289.47 mL g^-1 VS) and biodegradability (43-63%) than those of the non-thermally pretreated biomass, and the optimum pretreatment effect was observed at an HTP temperature of 180 °C. However, at an HTP temperature exceeding 200 °C, the induced formation of 5-hydroxymethylfurfural and furfural significantly lowered the methane yield and biodegradability. This study revealed that the HTP temperature is closely related to the formation of lignocellulosic biomass-degrading byproducts, which potentially hinder the methanogenesis step in AD; severe HTP conditions may have the opposite effect on the AD performance of lignocellulosic biomass.