Enhanced mineralization of oxalate by highly active and Stable Ce(III)-Doped g-C3N4 catalyzed ozonation

Roles of CeO2 in preparing Ce-doped CdIn2S4 with boosted photocatalytic degradation performance for methyl orange and tetracycline hydrochloride

Element doping is considered as a feasible strategy to develop efficient photocatalysts. In this study, a Ce-doped CdIn2S4 photocatalyst was prepared through a modified coprecipitation method. During the synthesis of Ce-doped CdIn2S4, the CeO2 nanorods were gradually reduced by the decomposition products of thioacetamide (TAA), and mainly existed as Ce(III) in the supernatant. This resulted in a large increase in the specific surface area of the as-obtained products, providing more exposed active sites for the reactant. Additionally, a trace amount of Ce was doped into the lattice of the CdIn2S4, resulting in a significant effect on the band structure. By tracing the roles of CeO2 during the synthesis process, a possible reaction mechanism was proposed. Benefiting from the synergistic advantages of the structural and compositional features, the optimal sample showed enhanced photocatalytic activities for the degradation of methyl orange (94.6% within 25 min) and tetracycline hydrochloride (85.6% within 120 min). The degradation rates were 13.3 times and 2.7 times higher than that of pristine CdIn2S4. This work may provide a strategy for designing metal element doped photocatalysts with good activity for pollutant removal.

An extra-chelator-free fenton process assisted by electrocatalytic-induced in-situ pollutant carboxylation for target refractory organic efficient treatment in chemical-industrial wastewater

For traditional Fenton processes, the quenching behavior of radical contenders (e.g., most aliphatic hydrocarbons) on hydroxyl radicals (·OH) usually hinders the removal of target refractory pollutants (aromatic/heterocyclic hydrocarbons) in chemical industrial wastewater, leading to excess energy consumption. Herein, we proposed an electrocatalytic-assisted chelation-Fenton (EACF) process, with no extra-chelator addition, to significantly enhance target refractory pollutant (pyrazole as a representative) removal under high ·OH contender (glyoxal) levels. Experiments and theoretical calculations proved that superoxide radical (·O₂^-) and anodic direct electron transfer (DET) effectively converted the strong ·OH-quenching substance (glyoxal) to a weak radical competitor (oxalate) during the electrocatalytic oxidation process, promoting Fe²⁺ chelation and therefore increasing radical utilization for pyrazole degradation (reached maximum of ∼43-fold value upon traditional Fenton), which appeared more obviously in neutral/alkaline Fenton conditions. For actual pharmaceutical tailwater treatment, the EACF achieved 2-folds higher oriented-oxidation capability and ∼78% lower operation cost per pyrazole removal than the traditional Fenton process, demonstrating promising potential for future practical applications.

Critical role of Photo-electrode with Ce-g-C3N4 in multi-stage microbial fuel cells cascade reactor treating diluted hyper-saline industrial wastewater rich in amines

Treatment of chemical industrial wastewater often faces problems of large volume occupation, high cost, and long processing time. In this study, low-content Ce-modified g-C₃N₄ was prepared and used as a catalyst on stainless steel mesh photo-cathode in constructing a multi-stage cascade microbial fuel cell system to reduce treatment costs in an energy-saving way. The large specific surface area (332.5 m² g^-1) and mesoporous structure of the material, is favorable for catalytic reactions, in which Ce elements were mainly present in single atoms. The characterized catalyst indicated a pronounced effect of Ce species in increasing photo-current and the synergistic pollutant removal, microbial bio-degradation and cascade operation stability. In Batch-mode (light illumination, aeration, total HRT (hydraulic residence time) of 54 h) treatment through three cascade reactors, removed 88% COD (Chemical Oxygen Demand). With 0.5 mM PMS (peroxymonosulfate), 94% COD and 86% NH₄⁺-N of the system were removed. The cascade net average COD removal capacity reached 16.04 kg per kg catalyst per day. The addition of PMS also enhanced the electricity generation. In continuous-mode, in totally 18 h treatment through the three-stages cascade reactors without PMS, overall, 83% COD and 78% TOC (Total Organic Carbon) were removed, reaching a net calculated system average COD removal capacity of 19.29 kg per kg catalyst per day. With Ce-g-C₃N₄ catalyst, the batch or continuous multi-stage cascade system demonstrated great technical flexibility and economic potential in treating high-strength, high-salinity amine-rich industrial wastewater.

Enhanced Direct Electron Transfer Mediated Contaminant Degradation by Fe(IV) Using a Carbon Black-Supported Fe(III)-TAML Suspension Electrode System

Iron complexes of tetra-amido macrocyclic ligands (Fe-TAML) are recognized to be effective catalysts for the degradation of a wide range of organic contaminants in homogeneous conditions with the high valent Fe(IV) and Fe(V) species generated on activation of the Fe-TAML complex by hydrogen peroxide (H₂O₂) recognized to be powerful oxidants. Electrochemical activation of Fe-TAML would appear an attractive alternative to H₂O₂ activation, especially if the Fe-TAML complex could be attached to the anode, as this would enable formation of high valent iron species at the anode and, importantly, retention of the valuable Fe-TAML complex within the reaction system. In this work, we affix Fe-TAML to the surface of carbon black particles and apply this "suspension anode" process to oxidize selected target compounds via generation of high valent iron species. We show that the overpotential for Fe(IV) formation is 0.17 V lower than the potential required to generate Fe(IV) electrochemically in homogeneous solution and also show that the stability of the Fe(IV) species is enhanced considerably compared to the homogeneous Fe-TAML case. Application of the carbon black-supported Fe-TAML suspension anode reactor to degradation of oxalate and hydroquinone with an initial pH value of 3 resulted in oxidation rate constants that were up to three times higher than could be achieved by anodic oxidation in the absence of Fe-TAML and at energy consumptions per order of removal substantially lower than could be achieved by alternate technologies.

New insight into the enhanced ozonation of malodorous compounds by Cu(II): Inhibiting the formation of free radicals to promote ozone utilization

Metal-enhanced ozonation can greatly improve the decay of organic matter; however, whether this method benefits the decay of malodorous compounds or not and the possible mechanism are not well understood. In this study, nine typical malodorous compounds were selected to reveal that Cu(II)-enhanced ozonation can greatly promote the decay of fatty amines because of the direct ozone oxidation, which was enhanced to promote ozone utilization. Moreover, trace Cu(II) can amplify the observed rate constants of dimethylamine and trimethylamine for 48.9% and 155.7%, respectively, and Cu(II) dosage was the determining factor using response surface methodology to investigate the interactions between initial pH, Cu(II) dosage and ozone dosage. These results demonstrated that the formation of ^•OH and O₂^•- was inhibited rather than promoted, which was quite different from some previously reported Cu(II)-enhanced ozonation counterparts. Moreover, the enhanced effect of trace Cu(II) was exhibited in both single and complex malodorous compounds. The conversion pathway of nitrogen and sulfur elements was clarified, with the targeted mineralization of nitrogen of nitrogen-containing malodorous compounds into NO₃-N and the odor characteristics of sulfur-containing malodorous compounds disappeared. These findings provided new insight for utilizing metal ions to enhance the direct ozone oxidation capacity of malodorous compounds.

Catalytic ozonation of sulfamethoxazole using low-cost natural silicate ore supported Fe2O3: influencing factors, reaction mechanisms and degradation pathways

A low-cost natural silicate ore supported Fe₂O₃ (FeSO) was synthesized for catalytic ozonation of sulfamethoxazole (SMX). XRD, SEM-EDS, BET, FTIR and XPS results of the FeSO catalyst confirmed that the natural silicate ore was successfully modified with iron oxide. The effects of key factors, such as catalyst dosage, initial solution pH, reaction temperature, inorganic anions and initial concentration, on ozonation degradation were systemically investigated. The degradation rate of SMX (20 mg L^-1) was 88.1% after 30 min, compared with only 35.1% SMX degradation rate in the absence of the catalyst, and the total organic carbon (TOC) removal reached 49.1% after 60 min. Reaction mechanisms revealed that surface hydroxyl groups of FeSO were a critical factor for hydroxyl radical (˙OH) production leading to fast SMX degradation in the ozone decomposition process. The degradation products were detected, and the possible pathways of SMX were then proposed. This study provides guidance for preparing a low-cost catalyst and analyzing the degradation products and pathways of SMX in the ozonation process, which is of significance in practical industrial applications.

High specific surface CeO2-NPs doped loose porous C3N4for enhanced photocatalytic oxidation ability

Porous C₃N₄(PCN) is favored by researchers because it has more surface active sites, higher specific surface area and stronger light absorption ability than traditional g-C₃N₄. In this study, cerium dioxide nanoparticles (CeO₂-NPs) with mixed valence state of Ce³⁺and Ce⁴⁺were doped into the PCN framework by a two-step method. The results indicate that CeO₂-NPs are highly dispersed in the PCN framework, which leads to a narrower band gap, a wider range of the light response and an improved the separation efficiency of photogenerated charge in PCN. Moreover, the specific surface area (145.69 m²g^-1) of CeO₂-NPs doped PCN is a 25.5% enhancement than that of PCN (116.13 m²g^-1). In the experiment of photocatalytic selective oxidation of benzyl alcohol, CeO₂-NPs doped porous C₃N₄exhibits excellent photocatalytic activity, especially Ce-PCN-30. The conversion rate of benzyl alcohol reaches 74.9% using Ce-PCN-30 as photocatalyst by 8 h of illumination, which is 25.7% higher than that of pure porous C₃N₄. Additionally, CeO₂-NPs doped porous C₃N₄also exhibits better photocatalytic efficiency for other aromatic alcohols.

Investigation of Cu-Mn catalytic ozonation of toluene: Crystal phase, intermediates and mechanism

The effect of different crystal phases, i.e. spinel phase (CuMn₂O₄) and amorphous phase (Cu_0.2MnO_x), was explored in Cu-Mn catalytic ozonation of toluene. The toluene removal efficiency followed the order of Cu_0.2MnO_x (91.2%) ˃ CuMn₂O₄ (74.5%) ˃ commercial catalyst Cu_0.3MnO_x (70.3%) in 130 min, and the higher CO₂ yield (67.6%) could be also observed using Cu_0.2MnO_x. In order to investigate the effect of phases on the toluene degradation pathway, the intermediates and byproducts were identified by DRIFTS, GC-MS, and TOF-SIMS. No obvious difference was observed in the distribution of byproducts, except for the quantities, suggesting the discrepancy of oxidation rate. On the other hand, the catalysts were characterized before and after the ozonation process by TEM, BET, XPS, XRD, EPR, TGA, and TPR. It was proposed that for amorphous catalysts, the oxygen vacancy (V_o) helped the chemisorption of toluene, and adjacent Mn reacted as the main active site for the ozonation process. While, the redox pair of Cu⁺/Mn⁴⁺ and Cu²⁺/(Mn³⁺, Mn²⁺) in the spinel phase plays an important role in the generation of oxygen vacancies for O₃ decomposition.

Catalytic ozonation of chloramphenicol with manganese-copper oxides/maghemite in solution: Empirical kinetics model, degradation pathway, catalytic mechanism, and antibacterial activity

The composite material of manganese-copper oxide/maghemite (Mn_xCu_yO_z/γ-Fe₂O₃) was synthesized by the co-precipitation-calcination method. With the initial concentration of 0.2 g/L Mn_xCu_yO_z/γ-Fe₂O₃ and 10 mg/L O₃, the chloramphenicol (CAP, 10 mg/L) could be completely degraded, which was about 2.22 times of that treated with ozonation alone. The contribution of O₃ and hydroxyl radical (•OH) for CAP degradation in the catalytic process was 6.9% and 93.1%, respectively. According to the effects of catalyst dosage, ozone dosage, and pH on the catalytic performance of Mn_xCu_yO_z/γ-Fe₂O₃, a predictive empirical model was developed for the ozonation with the Mn_xCu_yO_z/γ-Fe₂O₃ system. The HCO₃^-/CO₃^2- and phosphates in solution could inhibit the degradation of CAP with the inhibition ratios 8.45% and 13.8%, respectively. The HCO₃^-/CO₃^2- could compete with CAP and react with •OH, and the phosphates were considered as poisons for catalysts by blocking the surface active sites to inhibit ozone decomposition. The intermediates and possible degradation pathways were detected and proposed. The catalytic ozonation could effectively control the toxicity of the treated solution, but the toxicity was still not negligible. Furthermore, Mn_xCu_yO_z/γ-Fe₂O₃ could be easily and efficiently separated from the reaction system with an external magnet, and it possessed excellent reusability and stability.

Advances in application of g-C3N4-based materials for treatment of polluted water and wastewater via activation of oxidants and photoelectrocatalysis: A comprehensive review

Recently, graphitic carbon nitride (g-C₃N₄) has received significant attention as a non-metallic, visible-light-activated photocatalyst for treating water and wastewater by degrading contaminants. Accordingly, previous review articles have focused on the photocatalytic properties of g-C₃N₄-based materials. However, g-C₃N₄ has several other notable features, such as high adsorption affinity towards aromatic substances and heavy metals, high thermal and chemical resistances, good compatibility with various materials, and easily scalable synthesis; therefore, in addition to simple photocatalysis, it can be widely used in other decontamination systems based on activation of oxidants and electrocatalysis. This critical review provides a comprehensive summary of recent advancements in g-C₃N₄-based materials and their use in treating polluted water and wastewater via the following routes (1) activation of oxidizing agents (e.g., hydrogen peroxide, ozone, peroxymonosulfate, and persulfate): and (2) photoelectrocatalysis using fabricated g-C₃N₄-based photocathodes and photoanodes. For each route, we briefly summarize the primary mechanisms, distinctive features, and performances of various water treatment systems using g-C₃N₄-based catalysts. We also highlight the specific roles of g-C₃N₄ in improving the efficiencies of these treatment processes. The advantages and limitations of previously reported water treatment systems using g-C₃N₄-based materials are also described and compared in this review. Finally, we discuss the challenges and prospects of improving g-C₃N₄-based water purification applications.

The Synthesis of Protein-Encapsulated Ceria Nanorods for Visible-Light Driven Hydrogen Production and Carbon Dioxide Reduction

1D rare earth-based nanomaterials have attracted significant attention due to their excellent photo/electro-catalytic performance. The corresponding challenge is how to synthesize shape and size-controlled nanostructures in an easy scale-up way. Herein, the authors present a facile one-step strategy to design 1D multifunctional protein-encapsulated cerium oxide nanorods (PCNRs) by utilizing bovine serum albumin as an efficient biotemplate. Remarkably, the PCNRs exhibit high chemical and interfacial adhesion stability with intriguing properties, resulting in an exceptionally high activity towards H₂ evolution and CO₂ reduction. The photocatalytic activity of PCNRs to produce H₂ is about 10 times higher than conventional CeO₂ nanorods. The incorporation of rhodamine B into the PCNRs brings unprecedentedly high photocatalytic H₂ evolution rate being 123 times higher than that of conventional CeO₂ nanorods. Further the presence of the -NH₂ groups on the PCNRs facilitated the adsorption and activation of CO₂ and efficiently suppressed the proton reduction, and as a result, the PCNRs photocatalyst is highly active in converting CO₂ to CO and CH₄ , with the evolution rates being 50 and 83 times higher than those of conventional CeO₂ nanorods, respectively. Achieving such efficient photocatalyst is a critical step toward practical production of high-value renewable fuels using solar energy.

Element-doped graphitic carbon nitride: confirmation of doped elements and applications

Doping is widely reported as an efficient strategy to enhance the performance of graphitic carbon nitride (g-CN). In the study of element-doped g-CN, the characterization of doped elements is an indispensable requirement, as well as a huge challenge. In this review, we summarize some useful characterization methods which can confirm the existence and chemical states of doped elements. The advantages and shortcomings of these characterization methods are discussed in detail. Various applications of element-doped g-CN and the function of doped elements are also introduced. Overall, this review article aims to provide helpful information for the research of element-doped g-CN.

Facile one-pot synthesis of carbon self-doped graphitic carbon nitride loaded with ultra-low ceric dioxide for high-efficiency environmental photocatalysis: Organic pollutants degradation and hexavalent chromium reduction

In the present study, an innovative carbon self-doped g-C₃N₄ (CCN) loaded with ultra-low CeO₂ (0.067-0.74 wt%) composite photocatalyst is successfully synthesized via a facile one-pot hydrothermal and calcination method. The CeO₂/CCN exhibits superior photocatalytic performance for tetracycline degradation (78.9% within 60 min), H₂O₂ production (151.92 μmol L^-1 within 60 min), and Cr(VI) reduction (99.5% within 40 min), which much higher than that of g-C₃N₄, CCN, CeO₂, and CeO₂/g-C₃N₄. The enhanced photocatalytic performance is originated from the fact that the doping of C can efficaciously broaden the utilization range of solar light and improve the reduction ability of photogenerated electrons. Meanwhile, the ultra-low loading of CeO₂ can effectually promote the migration of photogenerated electrons and enhance the specific surface area. Besides, the experiments of pH effect and cycle ability indicate that CeO₂/CCN has excellent durability and stability. Finally, the photocatalytic mechanism of CeO₂/CCN is systematically discussed. This work proves that combining element doping and semiconductor coupling is a promising strategy to design high-efficiency g-C₃N₄-based photocatalysts.

Degradation of caffeic acid by dielectric barrier discharge plasma combined with Ce doped CoOOH catalyst

Herein, Ce doped CoOOH was used as the catalyst for caffeic acid (CA) degradation by dielectric barrier discharge (DBD) plasma. The treatment performance and catalytic mechanism were studied by a series of experiments and density functional theory (DFT) simulations. The results show that the doping amounts of Ce significantly influenced the catalytic performance of CoOOH in DBD plasma, and the catalytic effect reached maximum when the molar ratio of Ce to Co was 1:9. CA was 100 % degraded by Ce₁/Co₉OOH/DBD with 10 min treatment, while only 75.6 % of CA was degraded by 10 min DBD treatment. Transformation of O₃ and H₂O₂ to ⋅OH was mainly responsible for the catalytic effect. The content of oxygen vacancies and unsaturated Co (Lewis acid sites) of CoOOH was increased by doping Ce according to the results of experiments and simulations, and the change was conducive to the catalytic reactions. DFT simulations also indicated that DBD generated O₃ and H₂O₂ were decomposed to O atoms, OH groups and free OH by Ce/CoOOH. The presence of reductive species in DBD plasma was confirmed, and ⋅H was a kind of important reactive specie for CA degradation. CA degradation pathway was proposed based on the detected degradation products.

A fluorine induced enhancement of the surface polarization and crystallization of g-C3N4 for an efficient charge separation

A synergy of high crystallinity and surface polarization constructed by F doping dramatically promotes charge separation efficiency, significantly enhancing photocatalytic activity.

Ce-based catalysts used in advanced oxidation processes for organic wastewater treatment: A review

Refractory organic pollutants in water threaten human health and environmental safety, and advanced oxidation processes (AOPs) are effective for the degradation of these pollutants. Catalysts play vital role in AOPs, and Ce-based catalysts have exhibited excellent performance. Recently, the development and application of Ce-based catalysts in various AOPs have been reported. Our study conducts the first review in this rapid growing field. This paper clarifies the variety and properties of Ce-based catalysts. Their applications in different AOP systems (catalytic ozonation, photodegradation, Fenton-like reactions, sulfate radical-based AOPs, and catalytic sonochemistry) are discussed. Different Ce-based catalysts suit different reaction systems and produce different active radicals. Finally, future research directions of Ce-based catalysts in AOP systems are suggested.

Recent advances in application of graphitic carbon nitride-based catalysts for degrading organic contaminants in water through advanced oxidation processes beyond photocatalysis: A critical review

Advanced oxidation processes (AOPs) have attracted much interest in the field of water treatment owing to their high removal efficiency for refractory organic contaminants. Graphitic carbon nitride (g-C₃N₄)-based catalysts with high performance and cost effectiveness are promising heterogeneous catalysts for AOPs. Most research on g-C₃N₄-based catalysts focuses on photocatalytic oxidation, but increasingly researchers are paying attention to the application of g-C₃N₄-based catalysts in other AOPs beyond photocatalysis. This review aims to concisely highlight recent state-of-the-art progress of g-C₃N₄-based catalysts in AOPs beyond photocatalysis. Emphasis is made on the application of g-C₃N₄-based catalysts in three classical AOPs including Fenton-based processes, catalytic ozonation and persulfates activation. The catalytic performance and involved mechanism of g-C₃N₄-based catalysts in these AOPs are discussed in detail. Meanwhile, the effect of water chemistry including pH, water temperature, natural organic matter, inorganic anions and dissolved oxygen on the catalytic performance of g-C₃N₄-based catalysts are summarized. Moreover, the reusability, stability and toxicity of g-C₃N₄-based catalysts in water treatment are also mentioned. Lastly, perspectives on the major challenges and opportunities of g-C₃N₄-based catalysts in these AOPs are proposed for better developments in the future research.