Efficiency and mechanisms of simultaneous removal of Microcystis aeruginosa and microcystins by electrochemical technology using activated carbon fiber/nickel foam as cathode material

Advanced oxidation processes for synchronizing harmful microcystis blooms control with algal metabolites removal: From the laboratory to practical applications

Harmful algal blooms (HABs) in freshwater systems have become a global epidemic, leading to a series of problems related to cyanobacterial outbreaks and toxicity. Studies are needed to improve the technology used for the simultaneous removal of harmful cyanobacteria and algal metabolites. In this review, widely reported advanced oxidation processes (AOPs) strategies for removing major species Microcystis aeruginosa (M. aeruginosa) and microcystins (MCs) were screened through bibliometrics, such as photocatalysis, activated persulfate, H2O2, Ozone oxidation, ultrasonic oxidation, and electrochemical oxidation, etc. AOPs generate kinds of reactive oxygen species (ROS) to inactivate cyanobacteria and degrade cyanotoxins. A series of responses occurs in algal cells to resist the damaging effects of ROS generated by AOPs. Specifically, we reviewed laboratory research, mechanisms, practical applications, and challenges of HABs treatments in AOPs. Problems common to these technologies include the impact of algal response and metabolites, and environmental factors. This information provides guidance for future research on the removal of harmful cyanobacteria and treatment of algal metabolites using AOPs.

Analysis of scientific and technological trends in the incorporation of activated carbon in advanced oxidation processes-a bibliometric study

There is high interest in the development of water pollution remediation technologies. Advanced oxidation processes (AOPs) are a promising alternative for the degradation of organic compounds; however, these technologies have been limited mainly by high operating costs and, in some cases, by forming byproducts, which can be more hazardous than the original pollutants. Activated carbon (AC) is a porous material that can be combined with AOP systems in various ways, given its adsorbent and catalytic characteristics. In addition, AC is a flexible, adaptable, and low-cost material. This article presents a bibliometric analysis of AOPs incorporating CA in scientific research and patents; the Scopus database was used to obtain patents and Orbit Express for patents. The most investigated AOPs incorporating AC are photocatalysis processes, Fenton processes, persulfate-based AOP, electrochemical processes, and ozonation. However, it is the persulfate-based AOP that has seen the greatest growth in scientific publications in recent years; this great interest can be related to the synergy that the process has with AC, allowing the degradation of contaminants via radical and non-radical. According to the maturity analysis of scientific publications, photocatalysis, Fenton, electrochemistry, ozonation, and persulfate technologies are in a growth stage and will reach maturity in 2034, 2042, 2040, 2034, and 2035, respectively; these technologies coupled with AC are expected to generate a greater number of patents when they reach maturity.

Inactivation of Microcystis aeruginosa by H2O2 generated from a carbon black polytetrafluoroethylene gas diffusion electrode in electrolysis by low-amperage electric current

Frequent outbreaks of cyanobacterial blooms have seriously threatened aquatic ecological environments and human health. Electrolysis by low-amperage electric current is effective for algae inactivation; however, it has no selectivity. Hydrogen peroxide (H₂O₂) is considered to be an efficient and selective suppressor of algae. Therefore, it is necessary to develop an electrode that can generate H₂O₂ to improve electrolysis technology. In this study, a carbon black polytetrafluoroethylene gas diffusion electrode (C-PTFE GDE) with good stability was prepared by a simple adhesive coating method. Then, the inactivation of Microcystis aeruginosa was conducted with electrolysis by low-amperage electric current using Ti/RuO₂ as the anode and C-PTFE GDE as the cathode. When the electrode spacing was 4 cm, the current density was 20 mA cm^-2, and the gas flow was 0.4 L min^-1, 85% of the algae could be inactivated in 20 min. Comparing the inactivation effect of the electric field and electrogenerated oxidants, it was found that electrolysis more rapidly and strongly inactivated algae when an electric field existed. However, electrogenerated oxidants dominated algae inactivation. The concentration of H₂O₂ was as high as 58 mg L^-1, while the concentration of chlorines was only 0.57 mg L^-1, and the generation rate of H₂O₂ was 65 times that of chlorines. Consequently, electrogenerated oxidants dominated by H₂O₂ attacked photosystem II of the algae and caused oxidative damage to membrane lipids, affecting the photosynthetic capacity. Eventually, most of the algae were inactivated. The study suggested that C-PTFE GDE was promising for the inactivation of Microcystis aeruginosa in this electrochemical system.

Floating sandwich-type electro-Fenton: A feasible process to remove micro-pollutants through adsorption enrichment and enhanced oxidation efficiency

To improve the removal efficiency of low-concentration organic pollutants and enhance the oxidation efficiency of electro-Fenton (EF) process, a floating sandwich-type EF system (N/(A)/D-EF) without aeration was constructed for the first time. This EF system electro-synthesized H₂O₂ through the floating natural air diffusion electrode (NADE) without aeration, and regenerated Fe(II) effectively by the activated carbon fiber (ACF) interlayer, which significantly enhanced the process oxidation capacity since its ^•OH yield was 8.7 times that of the conventional EF system. In addition, the ACF interlayer could adsorb and enrich micro-pollutants and the generated ^•OH directly oxidize the pollutants adsorbed on the ACF, which enabled regeneration of ACF and maintained removal stability in 20 consecutive experiments. The removal rate constant (k) of carbamazepine by N/(A)/D-EF process was 7.6 times and 2.1 times higher than that of conventional EF and ACF adsorption process, respectively. This process could efficiently remove mixed low-concentration organic pollutants (0.1 mg L^-1) in domestic sewage and lake water with rate constant 1.6-7.1 times that of the conventional EF process but lower energy consumption. Meanwhile, the N/(A)/D-EF process had a wider application range of sewage pH and conductivity, which was a promising process for removing low-concentration pollutants in wastewater.

A comprehensive review on the photocatalytic inactivation of Microcystis aeruginosa: Performance, development, and mechanisms

Harmful algae blooms (HABs), caused by severe eutrophication and extreme weather, have spread all over the world, posing adverse effects on eco-environment and human health. Microcystis aeruginosa is the dominant harmful cyanobacterial species when HABs occur, and the toxic metabolites produced by it, microcystins, are even fatal to humans. Photocatalytic technology has received wide attention from researchers for its clean and energy-efficient features, while the basic mechanisms and modification methods of photocatalysts have also been widely reported. In recent years, photocatalytic technology has shown great promise in the inhibition of HABs. In this article, we systematically reviewed the progress in photocatalytic performance and algae removal efficiency, discuss the damage mechanisms of photocatalysts for algae removal, including physical damage and various oxidative stresses, and also explore the degradation rates and possible pathways of microcystins. It can be concluded that during the photocatalytic process, the cytoarchitectural integrity of algae cells was damaged, a variety of important protein and enzyme systems were disrupted, and the antioxidant systems collapsed due to the continuous attack of ROS, which adversely affected the normal physiological activities and growth, resulting in the inactivation of algae cells. Moreover, photocatalysts have a degrading effect on microcystins, thus reducing the adverse effects of HAB. Finally, a brief summary of future research priorities regarding the photocatalytic degradation of algae cells is presented. This study helps to enhance the understanding of the destruction mechanism of Microcystis aeruginosa during the photocatalytic process, and provides a reference for the photodegradation of HAB in water bodies.

Microalgae removal technology for the cold source of nuclear power plant: A review

In the past three decades, nuclear energy has gained much attention as carbon-free electricity. Due to the supply of cooling water in nuclear power plant, large amount of waste heat will increase the water temperature, promote the microalgae and cyanobacteria propagation and increase the chance of red tide. Excess phytoplankton of cool source will result in abnormal operation of cooling system, even core overheating and nuclear leakage. Consequently, it is very important to remove microalgae and cyanobacteria from cold source of nuclear power plants. This review summarizes the formation mechanism and monitoring methods of red tide, compares the advantages and disadvantages of traditional microalgae removal technology including physical, chemical and biological methods. Furthermore, the improved electrochemical method and micro-nano bubble method are introduced in detail. Their combination is considered to be a low-cost, efficient and environmentally-friendly technology to prevent and control red tides for cold source of nuclear power plant.

Synergistic effects of oxidation, coagulation and adsorption in the integrated fenton-based process for wastewater treatment: A review

Fenton process is the most popular for wastewater treatment among all available advanced oxidation processes (AOPs). Numerous endeavors have been devoted to improving the oxidation efficiency of Fenton reaction in terms of promoting ·OH generation, accelerating iron redox cycle and extending applicable pH range. However, in addition to oxidation, coagulation and adsorption also simultaneously occur in the Fenton process, which play important role in the removal of pollutants. Rapid progress has revealed the synergistic effects of oxidation, coagulation and adsorption in the Fenton process, providing new ideas for the treatment of complex and refractory wastewater. Based on available studies, this review is the first to systematically summarize the research progress regarding the synergistic effects of oxidation, coagulation and adsorption in the integrated Fenton-based processes for wastewater treatment. The involved mechanism of the synergistic effects in different Fenton processes (homogeneous Fenton, heterogeneous Fenton and physical field-assistant Fenton coupling process) are critically reviewed. Furthermore, special attention has been paid to the representative applications of the synergistic effects in wastewater treatment (such as industrial organic wastewater, landfill leachate and heavy metal-organic complexes, etc.), particularly focusing on the operation parameters and removal performance. Finally, a conclusion of the review and subsequently, perspectives are given for possible research directions. We believe this review can provide useful information for researchers and end-users involved in the development and application of the Fenton process in wastewater treatment.

Okara and okara modified and functionalized with iron oxide nanoparticles for the removal of Microcystis aeruginosa and cyanotoxin

Eutrophicating compounds promote the growth of cyanobacteria, which has the potential of releasing toxic compounds. Alternative raw materials, such as residues, have been used in efficient adsorption systems in water treatment. The aim of the present study was to apply the residue Okara in its original form and modified by hydrolysis with immobilization of magnetic nanoparticles as an adsorbent. For the removal, the cyanobacteria Microcystis aeruginosa was chosen, as well as its secondary metabolites, L-amino acids leucine and arginine (MC-LR microcystin), from aqueous solutions. The adsorbents presented a negative surface charge, and the x-ray diffraction (DRX) outcomes successfully demonstrated the immobilization of iron oxide nanoparticles on the adsorbents. The adsorbent with the best result was the Okara hydrolyzed and functionalized with iron oxide, which showed a 47% (qe = 804.166 cel/g) and 85% (qe = 116.94 µg/L) removal for the cyanobacteria cells and chlorophyll-a, respectively. The kinetics study demonstrated a pseudo-first-order adsorption with maximal adsorption in 480 minutes, removing 761 µg/L of chlorophyll-a. In this trial, a low organic material removal has occurred, with a removal rate of 5% (qe = 0.024 mg/g) in the analysis of compounds in absorbance by ultraviolet light (UV) monitored by optical density determination in 254 nm (OD254). Nevertheless, the reaction system with the presence of organic material removed 53,28% of the MC-LR toxin, with adsorption capacities of 2.84 µg/L in a preliminary trial conducted for two hours, arising as a potential and alternative adsorbent with a capacity of removing cyanobacteria and cyanotoxin cells simultaneously.

Effect of protopine exposure on the physiology and gene expression in the bloom-forming cyanobacterium Microcystis aeruginosa

Environment-friendly sound measures with high algal growth inhibition efficiency are required to control and eliminate CyanoHABs. This study examined the effects of protopine on growth, gene expression, and antioxidant system of the M. aeruginosa TY001 and explored possible damage mechanism. The results revealed that higher concentrations of protopine seriously inhibited the growth of M. aeruginosa. Quantitative real-time PCR analysis showed downregulated expression of stress response genes (prx and fabZ), and DNA repair gene (recA) on days 3 and 5. The activities of antioxidant enzymes were also decreased markedly, including superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD). Additionally, protopine stress can significantly increase the malondialdehyde (MDA) level in cells. In conclusion, oxidative damage and DNA damage are the main mechanisms of protopine inhibition on M. aeruginosa TY001. Our studies provide evidence that alkaloid compounds such as protopine may have a potential use value as components of aquatic management strategies.

A novel polyethersulfone/modified activated carbon fiber composite membrane: potential for removal micropollutants from water under the electric field

This study aimed to develop a novel composite membrane based on polyethersulfone (PES) and modified activated carbon fibers (ACFs) to remove of sulfamethoxazole (SMZ) from water. The modification of ACFs was conducted by using acid, Fe, and Mn and was confirmed by Fourier transform infrared spectroscopy (FT-IR), energy dispersive X-ray spectroscopy (EDS), and water contact angle measurement. Later on, the composite membranes were prepared using PES (9 wt%), N-N-dimethylacetamide (DMAc) (75 wt%), polyethylene pyrrolidone (PVP) (5 wt%), anhydrous lithium chloride (LiCl) (1 wt%), and various types of modified ACFs (0.8 wt%) as additives. It was found that the contact angle of the membrane decreased by more than 20°, and the zeta potential decreased by more than 10 mV. ACF modified by Fe was used as an admixture, membrane obtained the high comprehensive performance. Especially bovine serum albumin (BSA) rejection rate and flux recovery ratio (FRR) reached 98.8% and 98.4%, respectively. And the removal rates of SMZ increased by 24.6% under the electric field. The degradation products were detected by high-performance liquid chromatography/mass spectrometry (HPLC/MS). Based on this result, the possible degradation pathways of SMZ are proposed.

Fabrication of NiCo2S4/carbon-filled nickel foam complex as an advanced binder-free electrode for supercapacitors

A novel strategy, composed of epoxy-resin filling, carbonization, and hydrothermal growing of NiCo2S4 nanorods, was developed to enlarge the surface area of nickel foam (NF) for loading electrochemically active materials and to successfully fabricate NiCo2S4/carbon-filled NF binder-free electrodes. Due to the certain electrical conductivity of the filled epoxy-resin-derived carbon and the enlarged loading surface area, the targeted electrode possesses outstanding electrochemical energy storage performance, with a maximum specific capacitance of 9.28 F cm-2 at a current density of 4 mA cm-2, more than 6 times the 1.46 F cm-2 of the NF-based electrode formed via directly growing NiCo2S4 on NF, and with a specific capacitance retention of about 60% after 2000 charge/discharge cycles. Our strategy provides a promising avenue for constructing a high-performance NF-based binder-free electrode and our resultant electrode presents great application potential in electrochemical energy storage.