The removal of azo dye from aqueous solution by oxidation with peroxydisulfate in the presence of granular activated carbon: Performance, mechanism and reusability

Enhanced activation of persulfate by modified red mud biochar for degradation of dye pollutant: Resource utilization and non-radical activation

The substantial development of the dyeing and printing industry has resulted in an increased discharge of dye wastewater containing a large amount of recalcitrant organic pollutants. Furthermore, the landfill disposal of red mud has led to significant environmental pollution such as soil erosion and groundwater contamination. Therefore, this study aimed to promote the resource utilization of red mud by preparing advanced oxidation catalyst, resulting in effective treatment of dye wastewater, and the primary reaction mechanism was revealed. In this study, biochar-loading red mud (RBC) was applied to activate persulfate (PDS) for the degradation of acid orange 7 (AO7) with the initial concentration of 50 mg L-1. The maximum removal rate of 2.45 mg L·min-1 was achieved in 20 min and corresponding with the removal ratio of 98.0% under the PDS concentration of 20 mM (4.76 g L-1). Eventually, the removal ratio of 99.2% was attained within 60 min. The high catalytic efficiency was probably ascribed to the singlet oxygen (1O2) dominant non-radical pathway and RBC-mediated electron transfer mechanism. It was found that Fe(II), specific surface areas and functional groups on the catalyst were highly related to its catalytic efficiency and passivation. RBC had better reusability due to the loading of biochar and the reduction of zero-valent iron. The non-radical pathway mechanism and electron transfer mechanism were proposed for the activation of PDS, and non-radical pathway played a dominant role. Besides, the degradation pathways and toxicity assessment were analyzed. This research proposed a new electron transfer mechanism for activation process of PDS, which can provide a theoretical support for further studies. Overall, this study demonstrated that catalysts synthesized from red mud and biomass exhibit highly efficient activation in degrading the model pollutant AO7 through PDS activation. The catalyst displayed promising reusability and practical applicability, offering potential advancements in both the resource utilization and reduction of red mud.

Efficient rhodamine B dye degradation by red mud-grapefruit peel biochar catalysts activated persulfate in water

The continuous and rapid development of textile industry intensifies rhodamine B dye (RhB) wastewater pollution. Meanwhile, massive red mud (RM) solid waste generated by the industrial alumina production process poses detrimental effects to the environment after leaching. For resource utilization and to reduce the expansion of RhB pollution, RM and peel red mud-biochar composite (RMBC) catalyst were synthesized in activating peroxydisulfate (PDS) for RhB degradation. Firstly, characterization results showed that compared to RM, RMBC had a higher content of catalytically active metals (Fe, Al, Ti) (higher than 0.92-4.18%), smaller pore size, and larger specific surface area (10 times), which verified RMBC had more potential catalytic oxidation activity. Secondly, under optimal dosage (catalyst, PDS), pH 4.6, and 20 mg L-1 RhB, it was found that the RhB degradation ratio of RM was 76.70%, which was reduced to 41% after three cycles, while that of RMBC was 89.98% and 67%, respectively. The results indicated that the performance of RMBC was significantly superior to that of RM. Furthermore, the quenching experiments, electron paramagnetic resonance spectroscopy tests, FTIR, and XPS analysis showed the function of O-H, C=O, C-O, Fe-O, and Fe-OH functional groups, which converted the PDS to the active state and hydrolyzed it to produce free radicals ([Formula: see text], 1O2, [Formula: see text]) for RhB degradation. And, Q Exactive Plus MS test obtained that RhB was degraded to CO2, H2O, and intermediate products. This study aimed to raise a new insight to the resource utilization of RM and the control of dye pollution.

Shaddock peels derived multilayer biochar with embedded CoO@Co nanoparticles for peroxymonosulfate based wastewater treatment

The utilization of bio-wastes, such as shaddock peels, is of great significance for sustainable development. Combined with the potential of peroxymonosulfate (PMS) based advanced oxidation process (AOP) in wastewater treatment, a highly efficient functional catalyst, derived from shaddock peels biochar (SPC) and embedded with CoO@Co nanoparticles, i.e. Co-SPC-x(y), was prepared using a facile impregnation-calcination method and used for refractory organics degradation with PMS. The decoration amount of Co and annealing temperature were optimized, and the effects of various reaction factors were investigated. The results indicated that the optimized sample of Co-SPC-10 (900) consisted of multilayer biochar with curly edges and highly dispersed CoO@Co nanoparticles in the range of 20-200 nm, which is in cubic metallic Co and CoO. Moreover, it also possessed a specific surface area of 248.6 m²/g, and exhibited excellent PMS activation ability with ∼100% chlortetracycline hydrochloride (CTC) removal ratio within only 12 min of operation. The Co-SPC-10 (900)/PMS system showed relatively high tolerance for HPO₄^2-, NO₃^- and SO₄^2-, while the Cl^- and HA had considerable effects on it. Mechanism exploration results revealed that both radical and non-radical pathways existed in the Co-SPC-10 (900)/PMS system, in which the multilayered biochar functioned as an electron transfer carrier to facilitate the continuous cycle of Co²⁺/Co³⁺ in the CoO@Co nanoparticles by reacting with the absorbed CTC and PMS, resulting in the production of •OH, SO₄^•-, O₂^•- and ¹O₂. Additionally, the Co-SPC-10 (900) also showed good stability and catalytic oxidation performance for various refractory organics.

Application of sulfate radicals-based advanced oxidation technology in degradation of trace organic contaminants (TrOCs): Recent advances and prospects

The large amount of trace organic contaminants (TrOCs) in wastewater has caused serious impacts on human health. In the past few years, Sulfate radical (SO₄^•-) based advanced oxidation processes (SR-AOPs) are widely recognized for their high removal rates of recalcitrant TrOCs from water. Peroxymonosulfate (PMS) and persulfate (PS) are stable and non-toxic strong oxidizing oxidants and can act as excellent SO₄^•- precursors. Compared with hydroxyl radicals(·OH)-based methods, SR-AOPs have a series of advantages, such as long half-life and wide pH range, the oxidation capacity of SO₄^•- approaches or even exceeds that of ·OH under suitable conditions. In this review, we present the progress of activating PS/PMS to remove TrOCs by different methods. These methods include activation by transition metal, ultrasound, UV, etc. Possible activation mechanisms and influencing factors such as pH during the activation are discussed. Finally, future activation studies of PS/PMS are summarized and prospected. This review summarizes previous experiences and presents the current status of SR-AOPs application for TrOCs removal. Misconceptions in research are avoided and a research basis for the removal of TrOCs is provided.

Efficient peroxymonosulfate (PMS) activation by visible-light-driven formation of polymorphic amorphous manganese oxides

Heterogeneous sulfate radical-based advanced oxidation processes (SR-AOPs) have been widely reported over the last decade as a promising technology for pollutant removal from wastewater. In this study, a novel peroxymonosulfate (PMS) activator was obtained by visible-light-driven Mn(II) oxidation in the presence of nitrate. The photochemically synthesized manganese oxides (PC-MnO_x) were polymorphic amorphous nanoparticles and nanorods, with an average oxidation state of approximately 3.0. It possesses effective PMS activation capacity and can remove 20 mg L^-1 acid organic II (AO7) within 30 min. The AO7 removal performance of PC-MnO_x was slightly decreased in natural waterbodies and in the presence of CO₃^2-, while it showed an anti-interference capacity for Cl^-, NO₃^- and humic acid. Chemical quenching, reactive oxygen species (ROS) trapping, X-ray photoelectric spectroscopy (XPS), in-situ Raman spectroscopy, and electrochemical experiments supported a nonradical mechanism, i.e., electron transfer from AO7 to the metastable PC-MnO_x-PMS complex, which was responsible for AO7 oxidation. The PC-MnO_x-PMS system also showed substrate preferences based on their redox potentials. Moreover, PC-MnO_x could activate periodate (PI) but not peroxydisulfate (PDS) or H₂O₂. Overall, this study provides a new catalyst for PMS activation through a mild and green synthesis approach.

Facile and green synthesis of carbon nanodots from environmental pollutants for cell imaging and Fe3+ detection

An economical and green approach has been provided to turn environmental pollutants into carbon nanodots for their potential applications in both bioimaging and Fe3+ detection.

Polyoxometalates for bifunctional applications: Catalytic dye degradation and anticancer activity

Improving the efficiencies of organic compound degradations by catalytic materials is a challenging materials research field. In our research, we successfully synthesized cobalt-based polyoxometalates (CoV-POMs) via a simple crystallization-driven self-assembly method. The incorporation of the newly synthesized CoV-POMs into peroxymonosulphate (PMS), forming a mixture, greatly enhancing the catalytic activation for a complete degradation of dye solution. The positive synergic effect between CoV-POMs and PMS was substantiated by a relatively meager degradation of less than 10% in the system without CoV-POMs, in which CoV-POMs played a vital role to activate PMS towards free radicals generation for dye degradation. Methylene blue (MB) and rhodamine B (RB) dyes were completely decolorized under 60 min with the presence of 40 mg/L CoV-POMs and 150 mg/L PMS. The CoV-POMs/PMS system was pH dependance with a lower dye degradation efficiency at elevated pH. The effect of pH was more prominent in RB dye, in which the degradation efficiency dropped drastically from 93.3% to 41.12% with the increase in the solution pH from 7 to 11. The quenching tests suggested that sulfate radicals were the dominant active species involving in the dye degradation reaction. Besides MB and RB dyes, CoV-POMs/PMS system also showed significant activity towards the degradation of phenol red (PR) and methyl orange (MO) dyes. In the biological test, CoV-POMs exhibited non-toxic behavior towards normal cells that reduced safety concern for the large-scale wastewater treatment application. In addition, the testing divulged the anticancer property of CoV-POMs with more than 35 % of A549 lung adenocarcinoma and MDA-MB-231 breast adenocarcinoma were killed with 250 mg/L CoV-POMs. The selective lethality of CoV-POMs towards cancer cells was found to be caused by different extents of cellular apoptosis. In overall, the synthesized bifunctional CoV-POMs manifested superior activities in the examined applications, specifically dye degradation and anticancer.

Enhancement of Fe-C micro-electrolysis in water by magnetic field: Mechanism, influential factors and application effectiveness

Fe-C micro-electrolysis system has been widely used in filters, or as an advanced treatment process in some water treatment plants to treat various wastewater. In this study, Fe-C micro-electrolysis process was enhanced by an economical and environmentally friendly method, applied magnetic field. Batch kinetic experiments and scanning electron micrographs demonstrated a more effective micro-electrolysis and more severely corroded on the surface of Fe-C after applying a magnetic field at pH 3.0. An applied magnetic field reduced the charge-transfer resistance and increased the current density in micro-electrolysis system and Fe-C became more prone to electrochemical corrosion. Corrosion products were proved to be Fe²⁺, Fe₃O₄, and C-O, moreover, the formation of them were also increased in the presence of a magnetic field. Base on that, some influential factors like magnetic field flux intensity, Fe-C particle size, pH, Fe-C dosage and its reusability were investigated in this paper. Since Fe²⁺ release was accelerated in micro-electrolysis system by an applied magnetic field, combination of various advanced oxidation processes were designed to explore the application effectiveness of the system. The degradation rate of target contaminant was significantly improved in the presence of a magnetic field, suggesting it could be a reliable method for wastewater treatment.

Pyrogenic Carbon Initiated the Generation of Hydroxyl Radicals from the Oxidation of Sulfide

Sulfide is one of the most abundant reductants in the subsurface environment, while pyrogenic carbon is a redox medium that widely exists in sulfide environment. Previous studies have found pyrogenic carbon can mediate the reductive degradation of organic pollutants under anoxic sulfide conditions; however, the scenario under oxic sulfide conditions has rarely been reported. In this study, we found that pyrogenic carbon can mediate hydroxyl radicals (^•OH) generation from sulfide oxidation under dark oxic conditions. The accumulated ^•OH ranged from 2.07 to 101.90 μM in the presence of 5 mM Na₂S and 100 mg L^-1 pyrogenic carbon at pH 7.0 within 240 min. The Raman spectra and electrochemical cell experiments revealed that the carbon defects were the possible chemisorption sites for oxygen, while the graphite crystallites were responsible for the electron transfer from sulfide to O₂ to generate H₂O₂ and ^•OH. Quenching experiments and degradation product identification showed that As(III) and sulfanilamide can be oxidized by the generated ^•OH. This research provides a new insight into the important role of pyrogenic carbon in redox reactions and dark ^•OH production.

Persulfate-activated charcoal mixture: an efficient oxidant for the synthesis of sulfonated benzo[d][1,3]oxazines from N-(2-vinylphenyl)amides and thiols in aqueous solution

A series of 2,4-aryl-4-((arylsulfonyl)methyl)-4H-benzo[d][1,3]oxazines in good to excellent yields have directly been obtained from N-(2-vinylphenyl)amides and thiols by employing a mixture of K₂S₂O₈-activated charcoal in aqueous acetonitrile solution at 50 °C. A plausible mechanism for the reaction is reported. It reveals that the reaction follows a radical pathway and the persulfate has been the oxygen source for formation of the sulfone group in the products. It is worth mentioning that this protocol utilizes an easily accessible K₂S₂O₈-activated charcoal mixture and thiols, respectively, as an oxidant and sulfonylating precursors for the first time.