Inhalation bioaccessibility estimation of polycyclic aromatic hydrocarbons from atmospheric particulate matter (PM10): Influence of PM10 composition and health risk assessment

Size-segregated content of heavy metals and polycyclic aromatic hydrocarbons in airborne particles emitted by indoor sources

Indoor air quality is negatively affected by the emission of different combustion sources releasing airborne particles and related particle-bound toxic compounds (e.g., heavy metals and polycyclic aromatic hydrocarbons). To date, very few studies focused on the chemical characterization of the airborne particles emitted by indoor sources were carried out; moreover, no data on their size-resolved chemical compositions are available. In the present study, an experimental analysis aimed at determining the size-segregated content of heavy metals and polycyclic aromatic hydrocarbons in airborne particles (including sub-micrometric ones) emitted by widely-used indoor combustion sources (i.e., incenses, candles, mosquito-coils, and cooking activities) was carried out. To this purpose, airborne particles were collected through an electric low-pressure impactor and were post-analyzed by means of chromatography-mass spectrometry and atomic emission spectrometry techniques. Results of the analyses showed that the chemical composition of the emitted particles is not invariant to the particle size, indeed, an important contribution of sub-micrometric particle range to the total mass of chemical compounds emitted by the sources was noticed. These findings also demonstrated that significant underestimations of particle-bound compounds depositing in the lungs could occur if size-dependent compositions are not adopted.

Validation of the analytical methodology used in obtaining the oral bioavailability of organic target pollutants in atmospheric particulate matter (PM10) applying an in-vitro method

In recent years, scientists have started evaluating the portion of PM-bound pollutants that may be liberated (bioaccessible fraction) in human fluids and spread through the digestive system ultimately entering systemic circulation (known as the bioavailable fraction). In the current research, an analytical procedure was validated and applied to characterize the oral bioavailable fraction of PM10 samples. The approach encompassed the determination of 49 organic contaminants. The proposed method aims to biomimetic complete mouth-gastric-intestinal system basing on an adaptation of the unified bioaccessibility method (UBM) modified by the inclusion of a dialysis membrane to mimic intestinal absorption and obtain the orally bioavailable fractions. It was followed by a vortex-assisted liquid-liquid extraction (VALLE) step, using gas chromatography-tandem mass spectrometry (GC-MS/MS). Analytical procedure was effectively validated by employing selected reaction monitoring (SRM) mode in MS/MS, matrix-matched calibration, and deuterium-labelled surrogate standards. This approach ensured heightened sensitivity, minimized matrix effects, and compensated for any losses during the process. The validation process covered various aspects, including studying linearity, determining detection and quantification limits, assessing analytical recoveries at three concentration levels, and evaluating precision both within a single day and across multiple days. The validated method was applied to PM10 samples, revealing that polycyclic aromatic hydrocarbons (PAHs) were the most frequently detected, with significant seasonal variations in their concentrations. Organophosphorus flame retardants (OPFRs) like TCPP were also detected in bioavailable fractions, highlighting their potential health impact. Bisphenols, SMCs, and PAEs were not detected, suggesting low levels in the studied urban area. Further research is needed to understand the bioavailability of PM-bound pollutants in different environments.

Sources, bioaccessibility and health risk of heavy metal(loid)s in the particulate matter of urban areas

Exposure to heavy metal(loid)s in airborne particulate matter (PM) could lead to various adverse health effects. The study investigated the total contents and the bioaccessibility of PM-bound heavy metal(loid)s (Cr, Mn, Co, Ni, Cu, Zn, As, Cd, and Pb), identified their potential sources, and evaluated the associated health risk via inhalation in eight typical cities in China (Nanjing, Mianyang, Huangshi, Nanchang, Kunming, Xiamen, Guangzhou, and Wuzhishan). The results showed that PM-bound Cr (VI) and As of all eight cities exceeded the limits of World Health Organization. The bioaccessibility of PM-bound heavy metal(loid)s exhibited large variations, with their means following the order of Cd > Mn > Co > Ni > Cu > Cr > As > Zn > Pb. Traffic and industrial emissions were identified as primary sources in most urban areas. The emission sources have important effects on the bioaccessibility of PM-bound heavy metal(loid)s. In particular, atmospheric Cu has its bioaccessibility significantly correlated with the contributions from traffic emissions. The bioaccessibility-based health risk assessment obtained different results from those using total contents, showing that the non-carcinogenic risks posed by most metal(loid)s were acceptable except for As in Huangshi and Nanchang. These findings highlight the source dependence of bioaccessibility of heavy metal(loid)s in airborne PM, facilitate the identification of priority pollution sources and enhance effective risk-oriented source regulatory strategies in urban areas.

Oxidative potential of the inhalation bioaccessible fraction of PM10 and bioaccessible concentrations of polycyclic aromatic hydrocarbons and metal(oid)s in PM10

Atmospheric particulate matter (PM) has been related to numerous adverse health effects in humans. Nowadays, it is believed that one of the possible mechanisms of toxicity could be the oxidative stress, which involves the development of reactive oxygen species (ROS). Different assays have been proposed to characterize oxidative stress, such as dithiothreitol (DTT) and ascorbic acid (AA) acellular assays (OPDTT and OPAA), as a metric more relevant than PM mass measurement for PM toxicity. This study evaluates the OP of the bioaccessible fraction of 65 PM10 samples collected at an Atlantic Coastal European urban site using DTT and AA assays. A physiologically based extraction (PBET) using Gamble's solution (GS) as a simulated lung fluid (SLF) was used for the assessment of the bioaccessible fraction of PM10. The use of the bioaccessible fraction, instead of the fraction assessed using conventional phosphate buffer and ultrasounds assisted extraction (UAE), was compared for OP assessment. Correlations between OPDTT and OPAA, as well as total and bioaccessible concentrations of polycyclic aromatic hydrocarbons (PAHs) and metal(oid)s, were investigated to explore the association between those compounds and OP. A correlation was found between both OP (OPDTT and OPAA) and total and bioaccessible concentrations of PAHs and several metal(oid)s such as As, Bi, Cd, Cu, Ni, and V. Additionally, OPDTT was found to be related to the level of K+.

A method for measuring the bioaccessibility of polycyclic aromatic hydrocarbons in cell culture media

Airborne polycyclic aromatic hydrocarbons (PAHs) and their derivatives are of particular concern for population health due to their abundance and toxicity via inhalation. Lung toxicity testing includes exposing lung epithelial cell lines to PAHs in a culture medium containing inorganic species, lipids, proteins, and other biochemicals where the cell response is influenced among others by the toxic chemical accessibility in the medium. While inhalation bioaccessibility of PAHs and other toxicants was previously studied in surrogate lung fluids, studies measuring bioaccessibility in cell culture media are rare. In this work, a method was developed to characterize PAH bioaccessibility in a culture medium used for mouse lung epithelial (FE1) cells. Further, the optimised method was tested using commercially available standard reference material of urban particulate matter (PM) as well as polyurethane foam passive air samplers (PUF-PAS). The method provided a high precision and recovery of analytes, indicating no losses during sample processing and analysis. PAHs had non-linear concentration-responses, with the culture medium approaching saturation with PM concentration of 500 μg mL-1. The results showed that phenanthrene, a 3-ring PAH, was significantly more bioaccessible than ≥4-ring congeners in the culture medium (up to ∼2.5 folds; p < 0.05). Finally, using pre-deployed PUF-PAS from a residential and an industrial site, five PAHs were found in the culture medium, including naphthalene, phenanthrene, anthracene, fluoranthene, and pyrene. This work provides a proof of concept to enable future studies to assess the inhalation bioaccessibility of polycyclic aromatic compounds and other airborne pollutants collected using PUF-PAS.

Emissions of nitrated and oxygenated polycyclic aromatic hydrocarbons bound to coarse particles from solid fuel combustion

Parent polycyclic aromatic hydrocarbons (PAHs) emitted by residential sector have been well studied, however, data on PAHs derivatives such as nitrated PAHs (nPAHs) and oxygenated PAHs (oPAHs) are scarce. In this study, emission factors (EFs) of PM10-bound nPAHs and oPAHs from the combustion of eight different solid fuels in three different stoves in rural homes were measured in field, and a total of twelve fuel-stove combinations were included. Results showed that the field-based EFs for different fuel-stove combinations varied over three orders of magnitude, which ranged from 3.3 to 514 μg/kg and from 0.1 to 214 mg/kg for nPAHs and oPAHs, respectively. Biomass burning had 2.2 and 14.8 times higher EFs values of nPAHs and oPAHs compared with coal burning. The size distribution pattern of PAHs derivatives confirmed that they prefer to bind to fine particles. The composition profiles of nPAHs and oPAHs varied largely in different coals, while slightly in different biomasses. Furthermore, the nPAHs and oPAHs composition profiles varied largely from emission source to the nearby atmosphere, implying that the composition of PAHs derivative changed during small-scale transport process. Results from this study can fill in the data gap in PAHs derivative emissions from residential solid fuel combustion and help to evaluate the environmental and health impacts of residential solid fuel combustion.

A multi-residue method for the analysis of organic pollutants released from atmospheric PM2.5 in simulated biological fluids: Inhalation bioaccessibility and bioavailability estimation

BACKGROUND

In recent decades, there has been a growing interest within the scientific community regarding the study of the fraction that could be released in simulated biological fluids to estimate in vitro bioaccessibility and bioavailability of compounds. Concerning particulate matter (PM), studies were essentially focused on metal (oid)s probably due to more complex methodologies needed for organic compounds, requiring extraction and pre-concentration steps from simulated fluids, followed by chromatographic analysis. Thus, the development of a simple and sensitive methodology for the analysis of multi-class organic compounds released in different inhalation simulated fluids would represent a great contribution to the field.

RESULTS

In this work, a methodology for the analysis of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols released in simulated fluids from PM2.5 samples was developed. After a physiologically based extraction test (PBET) by using artificial lysosomal fluid (ALF) and a simulated body fluid (SBF, filling a dialysis membrane) to obtain in vitro inhalation bioaccessible and bioavailable fractions, respectively; compounds were determined by a vortex-assisted liquid-liquid extraction (VALLE) and a subsequent analysis by programmed temperature vaporization-gas chromatography-tandem mass spectrometry (PTV-GC-MS/MS). Experimental conditions concerning VALLE extraction (extraction time and amount of NaCl (g)) were optimized by using a central composite design (CCD), best MS/MS transitions were selected and matrix-matched calibration combined with use of labelled subrogate standards provided high sensitivity, minimization of matrix effects and recovering losses compensation.

SIGNIFICANCE

The successful validation results obtained for most of the compounds demonstrated the effectiveness of the proposed methodology for the analysis of multi-class organic pollutants released in ALF and SBF for inhalation bioaccessibility and bioavailability assessment, respectively. Furthermore, applicability of the method was proved by analysing 20 p.m.2.5 samples, being the proposed in vitro PBET dialyzability approach for assessing organic pollutant's inhalation bioavailability applied to PM2.5 samples for the first time.

Inhalation bioaccessibility and risk assessment for PM-bound organic components: Co-effects of component physicochemical properties, PM properties, and sources

Inhalation bioaccessibility and deposition in respiratory tracts of organic components in atmospheric particulate matter (PM) are key factors for accurately estimating health risks and understanding human exposures. This study evaluated the in-vitro inhalation bioaccessibility of polycyclic aromatic hydrocarbons (PAHs) and PAH derivatives, phthalic acid esters (PAEs), polychlorinated biphenyls (PCBs), and organophosphate flame retardants (OPFRs) in size-resolved PM from a Chinese megacity. The bioaccessibility ranged from 0.2% to 77.8% in the heating period (HP), and from 0.7% to 94.2% in the non-heating period (NHP). Result suggests that less hydrophobic organics might be more bioaccessible. Bioaccessibility of medium logKow organics in sizes > 0.65 µm was significantly inhibited by high carbon fractions, indicating the co-effects. Then, this is the first study to explore effects of sources on inhalation bioaccessibility of organics. Coal and biomass combustion in HP and traffic emission in NHP negatively correlated with bioaccessibility. Secondary particles also negatively correlated with bioaccessibility of medium logKow organics. Incremental lifetime cancer risk (ILCR) and non-cancer risk (HQ) for all measured components in PM10 were estimated after considering the bioaccessibility and deposition efficiencies and the HQ and ILCR were within the acceptable range. BaP and DEHP were strong contributors to HQ and ILCR, respectively.

Inhalation bioaccessibility of multi-class organic pollutants associated to atmospheric PM2.5: Correlation with PM2.5 properties and health risk assessment

Inhalation exposure to fine particulate matter (PM_2.5) represents a global concern due to the adverse effects in human health. In the last years, scientific community has been adopted the assessment of the PM_2.5-bound pollutant fraction that could be released (bioaccessible fraction) in simulated lung fluids (SLFs) to achieve a better understanding of PM risk assessment and toxicological studies. Thus, bioaccessibility of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols in PM_2.5 samples was evaluated. The proposed method consists of a physiologically based extraction test (PBET) by using artificial lysosomal fluid (ALF) to obtain bioaccessible fractions, followed by a vortex-assisted liquid-liquid microextraction (VALLME) and a final analysis by programmed temperature vaporization-gas chromatography-tandem mass spectrometry (PTV-GC-MS/MS). The highest inhalation bioaccessibility ratio was found for bisphenol A (BPA) with an average of 83%, followed by OPFRs, PAEs and PAHs (with average bioaccessibilities of 68%, 41% and 34%, respectively). Correlations between PM_2.5 composition (major ions, trace metals, equivalent black carbon (eBC) and UV-absorbing particulate matter (UVPM)) and bioaccessibility ratios were also assessed. Principal Component Analysis (PCA) suggested that PAHs, PAES and OPFRs bioaccessibility ratios could be positively correlated with PM_2.5 carbonaceous content. Furthermore, both inverse and positive correlations on PAHs, PAEs and OPFRs bioaccessibilites could be accounted for some major ions and metal (oid)s associated to PM_2.5, whereas no correlations comprising considered PM_2.5 major ions and metal (oid)s contents and BPA bioaccessibility was observed. In addition, health risk assessment of target PM_2.5-associated PAHs via inhalation was assessed in the study area considering both total and bioaccessible concentrations, being averaged human health risks within the safe carcinogenic and non-carcinogenic levels.

Evaluating the inhalation bioaccessibility of traffic-impacted particulate matter-bound PAHs in a road tunnel by simulated lung fluids

Polycyclic aromatic hydrocarbons (PAHs) are the most highly concerned pollutants bound on traffic-impacted particulate matter (TIPM). The inhaled TIPM-bound PAHs risk has attracted much attention, whereas the inhalation bioaccessibility, a method to refine the exposure risk assessment, has not yet been extensively introduced in the exposure risk assessment. Thus, in vitro assays using artificial lung fluids including artificial lysosomal fluid (ALF), Gamble's solution (GS), and modified GS (MGS) were conducted to assess the inhalation bioaccessibility of USEPA 16 PAHs in TIPM collected from an expressway tunnel, the influence factors of PAHs' inhalation bioaccessibility were explored, and the exposure risk of TIPM-bound PAHs was estimated based on inhalation bioaccessibility. Results showed that the average PAHs concentrations were 30.5 ± 12.9 ng/m³, 36.2 ± 5.19 ng/m³, and 39.9 ± 4.31 ng/m³ in the tunnel inlet PM_2.5, TSP, and tunnel center PM_2.5, respectively. Phe, Flt, Pyr, Nap, Chr, BbF, and BkF were found as the dominant species in TSP and PM_2.5, indicating a dominant contribution of PAHs from diesel-fueled vehicular emissions. The bioaccessible fractions measured for different PAH species in tunnel PM_2.5 and TSP were highly variable, which can be attributed to PAHs' physicochemical properties, size, and carbonaceous materials of TIPM. The addition of Tenax into SLF as an "adsorption sink" can greatly increase PAHs' inhalation bioaccessibility, but DPPC has a limited effect on tunnel PM-bound PAHs' bioaccessibility. The incremental lifetime carcinogenic risk (ILCR) of tunnel inlet PM_2.5-bound PAHs evaluated according to their total mass concentration exceeded the threshold (1.0 × 10^-6) set by the USEPA, whereas the ILCRs estimated based on the inhalation bioaccessibility were far below the threshold. Hence, it is vitally important to take into consideration of pollutant's bioaccessibility to refine health risk assessment.

Size-dependent in vitro inhalation bioaccessibility of PAHs and O/N PAHs - Implications to inhalation risk assessment

Size segregated samples (<0.49, 0.49-0.95, 0.95-1.5, 1.5-3.0, 3.0-7.2 and > 7.2 μm) of atmospheric particulate matter (APM) were collected at a traffic site in the urban agglomeration of Thessaloniki, northern Greece, during the cold and the warm period of 2020. The solvent-extractable organic matter was analyzed for selected organic contaminants including polycyclic aromatic hydrocarbons (PAHs), and their nitro- and oxy-derivarives (NPAHs and OPAHs, respectively). Mean concentrations of ∑₁₆PAHs, ∑₆NPAHs and ∑₁₀OPAHs associated to total suspended particles (TSP) were 18 ng m^-3, 0.2 ng m^-3 and 0.9 ng m^-3, respectively, in the cold period exhibiting significant decrease (6.4, 0.2 and 0.09 ng m^-3, respectively) in the warm period. The major amount of all compounds was found to be associated with the alveolar particle size fraction <0.49 μm. The inhalation bioaccessibility of PAHs and O/N PAHs was measured in vitro using two simulated lung fluids (SLFs), the Gamble's solution (GS) and the artificial lysosomal fluid (ALF). With both SLFs, the derived bioaccessible fractions (BAFs) followed the order PAHs > OPAHs > NPAHs. Although no clear dependence of bioaccessibility on particle size was obtained, increased bioaccessibility of PAHs and PAH derivatives in coarse particles (>7.2 μm) was evident. Bioaccessibility was found to be strongly related to the logK_OW and the water solubility of individual compounds hindering limited mobilization of the most hydrophobic and less water-soluble compounds from APM to SLFs. The lifetime cancer risk due to inhalation exposure to bioaccessible PAHs, NPAHs and OPAHs was estimated and compared to those calculated from the particulate concentrations of organic contaminants.

Investigation of PAHs, nitrated PAHs and oxygenated PAHs in PM10 urban aerosols. A comprehensive data analysis

Polycyclic aromatic compounds (PACs) in particulate matter contribute considerably to the health risk of air pollution. As such, we have optimized a method to determine the levels of polycyclic aromatic hydrocarbons, especially nitrated and oxygenated polycyclic aromatic hydrocarbons, in samples of PM₁₀ particulate matter using microwave-assisted extraction (MAE) and gas chromatography coupled to a triple quadrupole mass spectrometer (GC-MS/MS). The proposed method was applied to the analysis of real samples collected in the urban area of Ciudad Real (Spain) during one year. The median total concentrations of eighteen PAHs (∑PAHs) and seven OPAHs (∑OPAHs) were 0.54 and 0.23 ng m^-3, respectively, with the corresponding value for NPAH (∑NPAHs) being 0.03 ng m^-3 (only detected in 40% of samples). A clear seasonal trend was observed, with higher levels in the cold season and lower in the warm season for ∑PAHs. The same effect was observed for ∑OPAHs, which exhibited a median concentration of 0.72 ng m^-3 in the cold season and 0.10 ng m^-3 in the warm season, and for ∑NPAH, which exhibited a median of 0.04 ng m^-3 in the cold season but were not detected in the warm season. Molecular diagnostic ratios and PCA (principal component analysis) showed a predominantly traffic origin for PACs. The sources of PAHs also depend on meteorological conditions and/or atmospheric reactions, as confirmed by means of statistical analysis. The ∑OPAH/∑PAH and ∑NPAH/∑PAH ratios were higher in the cold season than the warm season, thus suggesting that PAH derivatives originated from primary combustion emission sources together with their parent PAHs. The concentration range found for benzo(a)pyrene was 0.006-0.542 ng m^-3, which is below the threshold value of 1 ng m^-3 established in European legislation as the annual average value. The lifetime lung risk from inhalation of PM₁₀-bound PACs was estimated to be six cancer cases per million people using the World Health Organization method.

Approach to Predicting the Size-Dependent Inhalation Intake of Particulate Novel Brominated Flame Retardants

The risk of human exposure to particulate novel brominated flame retardants (NBFRs) in the atmosphere has received increasing attention from scientists and the public, but currently, there is no reliable approach to predict the intake of these compounds on the basis of their size distribution. Here, we develop a reliable approach to predict the size-dependent inhalation intake of particulate NBFRs, based on the gas/particle (G/P) partitioning behavior of the NBFRs. We analyzed the concentrations of eight NBFRs in 363 size-segregated particulate samples and 99 paired samples of gaseous and bulk particles. Using these data, we developed an equation to predict the G/P partitioning quotients of NBFRs in particles in different size ranges (K_Pi) based on particle size. This equation was then successfully applied to predict the size-dependent inhalation intake of particulate NBFRs in combination with an inhalation exposure model. This new approach provides the first demonstration of the effects of the temperature-dependent octanol-air partitioning coefficient (K_OA) and total suspended particle concentration (TSP) on the intake of particulate NBFRs by inhalation. In an illustrative case where TSP = 100 μg m^-3, inhalation intake of particulate NBFRs exceeded the intake of gaseous NBFRs when log K_OA > 11.4.

Inhalation bioaccessibility, health risk assessment, and source appointment of ambient PM2.5-bound polycyclic aromatic hydrocarbons (PAHs) in Caofeidian, China

The inhalation bioaccessibility of polycyclic aromatic hydrocarbons (PAHs) is significant for accurately assessing the health risks posed by PM_2.5-bound PAHs. In this study, 96 PM_2.5 samples from Caofeidian, China, were investigated for PM_2.5-bound PAH source appointment and bioaccessibility assessment during four seasons. PAH₁₈ potential sources were identified by positive matrix factorization. The inhalation bioaccessibility of PAH₁₈ was investigated by simulated epithelial lung fluid extraction. The incremental lifetime cancer risk (ILCR) model was subsequently used to evaluate the carcinogenic risk posed by PM_2.5-bound PAHs in children, teenagers, and adults. Four potential sources of PM_2.5-bound PAH₁₈ were identified: industry emissions (44%), petroleum volatilization (30%), vehicle emissions (15%), and coal combustion (11%). The average inhalation bioaccessibility of PAHs ranged from 17.8% (dibenzo [a,h] anthracene) to 67.9% (fluorene). The ILCR values for children and teenagers were lower than the acceptable levels (10^-6) in the four seasons considering inhalation bioaccessibility. However, the ILCR value of adults was higher than the threshold in winter (1.26 × 10^-6). Source identification suggested that reducing industrial pollution was the primary measure for controlling PM_2.5-bound PAHs in Caofeidian. Additionally, the inhalation bioaccessibility of PM_2.5-bound PAHs was evaluated to precisely estimate the health risks caused by PAHs.

Bioaccessibility and public health risk of heavy Metal(loid)s in the airborne particulate matter of four cities in northern China

Atmospheric coarse particulate matter (PM₁₀) enriched with heavy metal(loid)s could pose potentially significant health risk to humans, while accurate health risk assessment calls for characterization of their bioaccessibility, besides the total contents. The health risk of major toxic heavy metal(loid)s in the PM₁₀ from four large cities in northern China via inhalation was investigated based on their total contents and bioaccessibility. The annual mean concentrations of PM-bound Zn, As, Pb, and Mn in the atmosphere of the four cities were 650, 305, 227, and 177 ng⋅m^-3, respectively. The levels of heavy metal(loid)s in the PM₁₀ were generally higher in winter but lower in summer in all four cities, which resulted primarily from the emissions associated with coal combustion for district and household heating and the unfavorable meteorological conditions in winter. The bioaccessibility of heavy metal(loid)s in the PM₁₀ ranged from 0.9 to 48.7%, following the general order of Mn > Co > Ni > Cd > Cu > As > Cr > Zn > Pb. Based on their total contents in the PM₁₀, most heavy metal(loid)s posed significant public health risk via inhalation exposure in the four cities. However, after accounting for the bioaccessibility of metal(loid)s, the non-carcinogenic risk of most metal(loid)s was negligible, except for As in the PM₁₀ of Jinzhong, while only the carcinogenic risk posed by Cr and As in the PM₁₀ exceeded the acceptable level. These findings demonstrate the importance of characterizing the bioaccessibility of airborne PM-bound heavy metal(loid)s in health risk assessment and could guide the on-going efforts on reducing the public health risk of PM₁₀ in northern China.

Inhalation bioacessibility and absorption of polycyclic aromatic hydrocarbons (PAHs) in indoor PM2.5 and its implication in risk assessment

Inhalation bioaccessibility of polycyclic aromatic hydrocarbons (PAHs) in PM_2.5 was assessed in numerous studies, however, the lung cell uptake and penetration of PAHs was seldom taken into account in risk assessment. In the present study, eighteen indoor PM_2.5 samples collected from Guangzhou, China were analyzed for the inhalation bioavailability of PAHs combining the inhalation bioaccessibility and cell absorption of PAHs. Two simulated epithelial lung fluid mimicking the healthy condition (as represented by gamble's solution (GMB), pH = 7.4) and the inflammatory condition (as represented by artificial lysosomal fluid (ALF), pH = 4.5) were employed to evaluate the inhalation bioaccessibility. The results indicated that the bioaccessibility of PAHs under the inflammatory condition (1.28%-87.7%) was higher than that under healthy condition (0.88%-87.6%). Naphthalene, phenanthrene, pyrene and benzo[a]pyrene were selected for absorption assay of lung epithelial cells (A549). The absorption rate of PAHs ranged from 64.7 to 90.7% and it was inversely proportional to the number of aromatic rings. Taken together, the inhalation bioavailability based on the bioaccessibility of PAHs and the lung cell absorption ratio ranged from 9.9 to 56.9% under the healthy state, from 12.7 to 65.6% under inflammatory condition. The correction parameter (F_c) was thus established and can be used to improve the risk assessment of human exposure to PAHs via PM_2.5 inhalation in future work.

Exposure to Atmospheric Particulate Matter-Bound Polycyclic Aromatic Hydrocarbons and Their Health Effects: A Review

Particulate matter (PM) is a major factor contributing to air quality deterioration that enters the atmosphere as a consequence of various natural and anthropogenic activities. In PM, polycyclic aromatic hydrocarbons (PAHs) represent a class of organic chemicals with at least two aromatic rings that are mainly directly emitted via the incomplete combustion of various organic materials. Numerous toxicological and epidemiological studies have proven adverse links between exposure to particulate matter-bound (PM-bound) PAHs and human health due to their carcinogenicity and mutagenicity. Among human exposure routes, inhalation is the main pathway regarding PM-bound PAHs in the atmosphere. Moreover, the concentrations of PM-bound PAHs differ among people, microenvironments and areas. Hence, understanding the behaviour of PM-bound PAHs in the atmosphere is crucial. However, because current techniques hardly monitor PAHs in real-time, timely feedback on PAHs including the characteristics of their concentration and composition, is not obtained via real-time analysis methods. Therefore, in this review, we summarize personal exposure, and indoor and outdoor PM-bound PAH concentrations for different participants, spaces, and cities worldwide in recent years. The main aims are to clarify the characteristics of PM-bound PAHs under different exposure conditions, in addition to the health effects and assessment methods of PAHs.