An algal assisted constructed wetland-microbial fuel cell integrated with sand filter for efficient wastewater treatment and electricity production

Using different configurations of L. hexandra-planted constructed wetland-microbial fuel cells to remove Cr (Ⅵ) and p-chlorophenol and generate electricity

P-chlorophenol (4-CP) and hexavalent chromium (Cr (VI)) are predominant contaminants in industrial effluents, eliciting substantial environmental and human health concerns. As a strong oxidant, Cr (Ⅵ) has the potential to facilitate the removal of 4-CP. However, the specific removal effect remains unclear. In this experiment, we designed three different reactors based on constructed wetland-microbial fuel cell (CW-MFC) technology and planted with Leersia hexandra Swartz in a stacked configuration, multistage configuration, and modular configuration. The co-pollutant removal was investigated by analysing wastewater purification, electrochemical performance, and growth of L. hexandra. The results showed that the modular configuration achieved the best removal rates. Furthermore, this configuration generated 254.0 mV voltage and 150.60 mW·m-3 power density. These findings showed the promise of modular technology for detoxifying wastewater containing complex mixtures while simultaneously generating electric power. Further research in this study could promote wastewater treatment and make substantial progress towards sustainable energy production.

Nutritional Health Connection of Algae and its Pharmaceutical Value as Anticancer and Antioxidant Constituents of Drugs

The marine environment is one of the major biomass producers of algae and seaweed; it is rich in functional ingredients or active metabolites with valuable nutritional health effects. Algal metabolites derived from the cultivation of both microalgae and macroalgae may positively impact human health, offering physiological, pharmaceutical and nutritional benefits. Microalgae have been widely used as novel sources of bioactive substances. Bioactive polymers extracted from algae, such as algal fucans, Galatians, alginates phenolics, carotenoids, vitamin B12, and peptides possess antioxidant, anticoagulant, antimicrobial, antiviral, anti-inflammatory, anti-allergy, anticancer, and hypocholesterolemic properties. It emphasizes that using marine-derived compounds with bioactive properties as functional food ingredients may help promote human health and prevent chronic diseases. Utilizing bioactive compounds has demonstrated notable advantages in terms of effectiveness more than conventional treatments and therapies currently in use which is also proven from different patents about algal applications in different fields. Despite the availability of numerous microalgae-derived products catering to human health and nutrition in the market, there remains a lack of social acceptance and awareness regarding the health benefits of microalgae. Hence, this review aims to offer a comprehensive account of the current knowledge on anticancers, antioxidants, commercially available edible algal products and therapeutics isolated from algae.

Examining the efficacy of constructed wetland coupled microbial fuel cell to treat textile wastewater using local wetlands plant species

Constructed wetland coupled microbial fuel cells (CW-MFC) offer a dual benefit of wastewater treatment and bioelectricity generation. While existing research predominantly emphasizes cell configuration, there is a limited exploration of the impact that various wetland plants may have on bioelectricity production in CW-MFCs. This research examined three distinct native wetland plants: Canna indica, Typha latifolia, and Eichhornia crassipes. The study centered on addressing textile wastewater treatment and assessing bio-electricity production. Over the course of 4 weeks, regular assessments were conducted every 3rd day to monitor the alternations in the wastewater properties. The T. latifolia exhibited a chemical oxygen demand removal efficiency of 85.45%, surpassing that of E. crassipes (83.17%), C. indica (80.03%), mix culture (85.29%), and the control (unplanted) system (73.11%). Maximum removal efficacy of phosphate (96.84%) and nitrate (82.88%) was also achieved by the Typha plant in comparison to other plant species. An increase in both reactive biomass and chlorophyll content of Canna and Typha under single and mixed culture conditions was also observed. The highest current and voltage were obtained from T. latifolia plant species (1.04 mA; 0.178 V). Based on the findings of this study, T. latifolia emerged as the optimum wetland plant for bioelectricity generation and organic matter, phosphate, and ammonia removal among the examined plant species. Therefore, incorporating T. latifolia in the design of a CW-MFC is recommended for efficient textile wastewater and bioelectricity generation.

Effects of Hydraulic Retention Time on Removal of Cr (VI) and p-Chlorophenol and Electricity Generation in L. hexandra-Planted Constructed Wetland-Microbial Fuel Cell

Hexavalent chromium (Cr (VI)) and para-chlorophenol (4-CP) are prevalent industrial wastewater contaminants that are recalcitrant to natural degradation and prone to migration in aquatic systems, thereby harming biological health and destabilizing ecosystems. Consequently, their removal is imperative. Compared to conventional chemical treatment methods, CW-MFC technology offers broader application potential. Leersia hexandra Swartz can enhance Cr (VI) and 4-CP absorption, thereby improving wastewater purification and electricity generation in CW-MFC systems. In this study, three CW-MFC reactors were designed with L. hexandra Swartz in distinct configurations, namely, stacked, multistage, and modular, to optimize the removal of Cr (VI) and 4-CP. By evaluating wastewater purification, electrochemical performance, and plant growth, the optimal influent hydraulic retention time (HRT) was determined. The results indicated that the modular configuration at an HRT of 5 days achieved superior removal rates and power generation. The modular configuration also supported the best growth of L. hexandra, with optimal photosynthetic parameters, and physiological and biochemical responses. These results underscore the potential of modular CW-MFC technology for effective detoxification of complex wastewater mixtures while concurrently generating electricity. Further research could significantly advance wastewater treatment and sustainable energy production, addressing water pollution, restoring aquatic ecosystems, and mitigating the hazards posed by Cr (VI) and 4-CP to water and human health.

Constructed wetlands combined with microbial fuel cells (CW-MFCs) as a sustainable technology for leachate treatment and power generation

The physical and chemical treatment processes of leachate are not only costly but can also possibly produce harmful by products. Constructed wetlands (CW) has been considered a promising alternative technology for leachate treatment due to less demand for energy, economic, ecological benefits, and simplicity of operations. Various trends and approaches for the application of CW for leachate treatment have been discussed in this review along with offering an informatics peek of the recent innovative developments in CW technology and its perspectives. In addition, coupling CW with microbial fuel cells (MFCs) has proven to produce renewable energy (electricity) while treating contaminants in leachate wastewaters (CW-MFC). The combination of CW-MFC is a promising bio electrochemical that plays symbiotic among plant microorganisms in the rhizosphere of an aquatic plant that convert sun electricity is transformed into bioelectricity with the aid of using the formation of radical secretions, as endogenous substrates, and microbial activity. Several researchers study and try to find out the application of CW-MFC for leachate treatment, along with this system and performance. Several key elements for the advancement of CW-MFC technology such as bioelectricity, reactor configurations, plant species, and electrode materials, has been comprehensively discussed and future research directions were suggested for further improving the performance. Overall, CW-MFC may offer an eco-friendly approach to protecting the aquatic environment and come with built-in advantages for visual appeal and animal habitats using natural materials such as gravel, soil, electroactive bacteria, and plants under controlled condition.

Performance and mechanisms of constructed wetland integrated microbial fuel cell for remediation and detoxification of leather tannery wastewater

Several previous studies concerned of microbial fuel cells integrated into constructed wetlands, nevertheless, their application as a convenient treatment for wastewater is still developing. In this experimental investigation, five CW-MFC systems were similarly designed, setup, and operated in a batch mode for two subsequent cycles. Each cycle lasted for 10 days to evaluate the performance of CW-MFC system for the remediation of real leather tannery wastewater (LTW). Four CW-MFCs were planted, each with different type of vegetation including Conocarpus, Arundo donax, Canna lily, and Cyperus papyrus in CW1-MFC, CW2-MFC, CW3-MFC, and CW4-MFC, respectively. The fifth CW5-MFC was maintained unplanted and considered as the control system. The performance of each CW-MFCs systems was evaluated mainly based on the removal of organic content (COD), total dissolved solid (TDS) elimination, and power generation. The results demonstrated that the four types of plants maintained healthy and no sign of wilting was observed during the 20 days of monitoring. For the first cycle of batch operation, maximum removal efficiencies of COD were 99.8%, 99.5%, 99.7%, 99.6% and 99.5% with power outputs of 10,502.8, 10,254.6, 9956.4, 10,029.6, and 9888.0 mW/m3, while, maximum TDS elimination were 46.7%, 39.7%, 60.8%, 55.5%, and 13.8% observed in CW1-MFC, CW2-MFC, CW3-MFC, CW4-MFC, and CW5-MFC, respectively. Very comparable results were observed in the second operation cycle. Results of phototoxicity test indicated that the germination of Hordeum vulgare and Triticum aestivum were 100% watered with treated effluent compared to 90% accomplished with tap water as the control solution for both types of seeds.

Algae-constructed wetland integrated system for wastewater treatment: A review

Integrating algae into constructed wetlands (CWs) enhances wastewater treatment, although the results vary. This review evaluates the role of algae in CWs and the performance of different algae-CW (A-CW) configurations based on literature and meta-analysis. Algae considerably improve N removal, although their impact on other parameters varies. Statistical analysis revealed that 70 % of studies report improved treatment efficiencies with A-CWs, achieving average removal rates of 75 % for chemical oxygen demand (COD), 74 % for total nitrogen and ammonium nitrogen, and 79 % for total phosphorus (TP). This review identifies hydraulic retention times, which average 3.1 days, and their varied impact on treatment efficacy. Mixed-effects models showed a slight increase in COD and TP removal efficiencies of 0.6 % every ten days in the A-CWs. Future research should focus on robust experimental designs, adequate algal storage and separation techniques, and advanced modeling to optimize the treatment potential of algae in CWs.

Advancement in constructed wetland microbial fuel cell process for wastewater treatment and electricity generation: a review

The constructed wetland coupled with a microbial fuel cell (CW-MFC) is a wastewater treatment process that combines contaminant removal with electricity production, making it an environmentally friendly option. This hybrid system primarily relies on anaerobic bioprocesses for wastewater treatment, although other processes such as aerobic bioprocesses, plant uptake, and chemical oxidation also contribute to the removal of organic matter and nutrients. CW-MFCs have been successfully used to treat various types of wastewater, including urban, pharmaceutical, paper and pulp industry, metal-contaminated, and swine wastewater. In CW-MFC, macrophytes such as rice plants, Spartina angalica, Canna indica, and Phragmites australis are used. The treatment process can achieve a chemical oxygen demand removal rate of between 80 and 100%. Initially, research focused on enhancing power generation from CW-MFC, but recent studies have shifted towards resource recovery from wastewater. This review paper provides an overview of the development of constructed wetland microbial fuel cell technology, from its early stages to its current applications. The paper also highlights research gaps and potential directions for future research.

Critical evaluation of electroactive wetlands: traditional and modern advances

In the field of sustainable wastewater management, electroactive wetlands (EW), or constructed wetland-microbial fuel cells (CW-MFC), are an emerging technology. With the growing problem of untreated wastewater, the emphasis must shift to decentralisation of wastewater treatment infrastructure, and CW-MFC can be an excellent choice. This review provides a chronologically organized account of the design and configuration of CW-MFCs developed between 2010 and 2023. The research on CW-MFC has mainly focused on material, positioning and number of electrodes; use of electroconductive media and filler materials; flow regime; algal-based CW-MFC and multistage setups. Compared to traditional constructed wetlands (CW) and microbial fuel cells (MFC), CW-MFCs have a number of advantages, including better treatment efficiency, faster organic matter utilisation, lower capital and land requirements and a smaller carbon footprint. However, there are some limitations as well, such as upscaling and viable electricity generation, which are covered in more detail in the article. Moreover, the economics of this technology is also evaluated. The microbiology of a CW-MFC and its influence on its performance are also elaborated. Recent advancements in this field in terms of design, configuration and performance are discussed. Finally, the knowledge gaps that must be addressed before this technique can be successfully implemented on a large scale are highlighted, along with specific recommendations. This article aims to advocate for EWs as an ideal decentralised wastewater treatment technique, while also shedding light on the areas that still need to be worked on.

Key issues to consider toward an efficient constructed wetland-microbial fuel cell: the idea and the reality

The research on constructed wetland (CW) and microbial fuel cell (MFC) has been separate studies worldwide with crucial achievements being made in both fields. Due to environmentally friendly feature (of CW) and rich microbial population and excellent electrode catalytic activity (of MFC), CW and MFC have their own anticipated application prospect in wastewater purification and biological electricity generation. More significantly, the idea of embedding MFC into CW to form CW-MFC expands the scope for both of them and this has received much interest in recent years due to its striking features of sewage treatment efficiency, electricity generation, sustainability, and environmental friendliness. The increasing interest and the lack of soul of CW-MFC emerging to the new researchers reflect the need to recall the idea and summarize its development with regard to achieving its reality via some key issues This forms the basis of the paper. The paper also includes how to enhance the efficiency of electricity generation and supplement energy consumption, the degradation of emerging pollutants, and the degradation mechanism as well as the potential joint application of CW-MFC with other treatment technique. A mass of CW-MFC design parameters has been synthesized from the literature. Challenges and potential directions of CW-MFC in the future are prospected. It is expected that the paper can serve as a linkage for bridging knowledge gaps for further studies of CW-MFC.

Development of nature-based sustainable passive technologies for treating and disinfecting municipal wastewater: Experiences from constructed wetlands and slow sand filter

There is an urgent need to develop low-cost technology for effective wastewater treatment and its further disinfection to the level that makes it economically useful. This work has designed and evaluated the various types of constructed wetlands (CWs) followed by a slow sand filter (SSF) for wastewater treatment and disinfection. The studied CWs were, CWs with gravels (CW-G), free water surface-CW (FWS-CWs), and CWs integrated microbial fuel cell (MFC) with granular graphite (CW-MFC-GG) planted with Canna indica plant species. These CWs were operated as secondary wastewater treatment technologies followed by SSF for disinfection purposes. The highest total coliform removal was observed in the combination of CW-MFC-GG-SSF which achieved a final concentration of 172 CFU/100 mL, whereas faecal coliform removal was 100 % with the combinations of CW-G-SSF and CW-MFC-GG-SSF, achieving 0 CFU/100 mL in the effluent. In contrast, FWS-SSF achieved the lowest total and faecal coliform removal attaining a final concentration of 542 CFU/100 mL and 240 CFU/100 mL, respectively. Furthermore, E. coli were detected as negative/absent in CW-G-SSF and CW-MFC-GG-SSF, while it was positive for FWS-SSF. In addition, the highest turbidity removal was achieved in CW-MFC-GG and SSF combination of 92.75 % from the municipal wastewater influent turbidity of 82.8 NTU. Furthermore, in terms of overall treatment performance of CW-G-SSF and CW-MFC-GG-SSF, these systems were able to treat 72.7 ± 5.5 % and 67.0 ± 2.4 % of COD and 92.3 % and 87.6 % of phosphate, respectively. Additionally, CW-MFC-GG also exhibited a power density of 85.71 mA/m3 and a current density of 25.71 mW/m3 with 700 Ω of internal resistance. Thus, CW-G and CW-MFC-GG followed by SSF could be a promising solution for enhanced disinfection and wastewater treatment.

Strategies and challenges to enhance commercial viability of algal biorefineries for biofuel production

The rise in energy consumption would quadruple in the coming century and the, existing energy resources might be insufficient to meet the demand of the growing population. An alternative and sustainable energy resource is therefore needed to address the fossil fuel deficiency. The utility of microalgae strains in the aspect of biorefinery has been in research for quite some time. Algal biorefinery is an alternate way of renewable energy however even after decades of research it still suffers from commercialization bottlenecks. The current manuscript reviews the scenarios where the innovation needs an ignition for its commercialization. This review discusses the prospects of up-scale cultivation, and harvesting algal biomass for biorefineries. It narrates algal biorefinery hurdles that can be solved using integrated technology approach, life cycle assessment and applications of nanotechnology. The review also sheds light upon the ties of algal biorefineries with its economic viability.

The race between classical microbial fuel cells, sediment-microbial fuel cells, plant-microbial fuel cells, and constructed wetlands-microbial fuel cells: Applications and technology readiness level

Microbial fuel cell (MFC) is an interesting technology capable of converting the chemical energy stored in organics to electricity. It has raised high hopes among researchers and end users as the world continues to face climate change, water, energy, and land crisis. This review aims to discuss the journey of continuously progressing MFC technology from the lab to the field so far. It evaluates the historical development of MFC, and the emergence of different variants of MFC or MFC-associated other technologies such as sediment-microbial fuel cell (S-MFC), plant-microbial fuel cell (P-MFC), and integrated constructed wetlands-microbial fuel cell (CW-MFC). This review has assessed primary applications and challenges to overcome existing limitations for commercialization of these technologies. In addition, it further illustrates the design and potential applications of S-MFC, P-MFC, and CW-MFC. Lastly, the maturity and readiness of MFC, S-MFC, P-MFC, and CW-MFC for real-world implementation were assessed by multicriteria-based assessment. Wastewater treatment efficiency, bioelectricity generation efficiency, energy demand, cost investment, and scale-up potential were mainly considered as key criteria. Other sustainability criteria, such as life cycle and environmental impact assessments were also evaluated.

Performance optimization of two-stage constructed wetland-microbial fuel cell system for the treatment of high-concentration wastewater

Constructed wetland-microbial fuel cell (CW-MFC) has attracted much attention because of its dual functions of wastewater treatment and energy recovery. However, its performance in treating high-concentration wastewater is degraded by the decreased dissolved oxygen at the cathode and insufficient electron acceptors. In this study, two CW-MFC systems with cathodic aeration were connected in series to investigate the effects of aeration rate and hydraulic retention time (HRT) on the removal of pollutants and the performance of electricity production in high-concentration wastewater. Results showed that aeration enhanced NH₄⁺-N and TP removal by 45.0-49.8% and 11.5-18.0%, compared with the unaerated condition, respectively. Meanwhile, no significant change regarding COD removal was observed. Aeration enhances the output voltage and power density of the system, especially the first stage CW-MFC, which improved the power production performance by 1 to 2 orders-of-magnitude. Increasing HRT improves the system's pollutant treatment efficiency and power generation performance for high-concentration wastewater. Still, the extension of HRT to 2 days will not contribute much to improving the removal efficiency. Under optimized conditions, the maximum total removal rates of COD, NH₄⁺-N, and TP for the two-stage tandem CW-MFC system were 99.3 ± 0.2%, 92.4 ± 1.6%, and 79.5 ± 3.4%, respectively. Meanwhile, the maximum output voltage and maximum power density of the first-stage CW-MFC were 405 mV and 138.0 mW/m³, respectively. In contrast, the maximum output voltage and maximum power density of the second stage are 105 mV and 14.7 mW/m³, respectively.

Green composites based on volcanic red algae Cyanidiales, cellulose, and coffee waste biomass modified with magnetic nanoparticles for the removal of methylene blue

In this paper, green nanocomposites based on biomass and superparamagnetic nanoparticles were synthesized and used as adsorbents to remove methylene blue (MB) from water with magnetic separation. The adsorbents were synthesized through the wet co-precipitation technique, in which iron-oxide nanoparticles coated the cores based on coffee, cellulose, and red volcanic algae waste. The procedure resulted in materials that could be easily separated from aqueous solutions with magnets. The morphology and chemical composition of the nanocomposites were characterized by SEM, FT-IR, and XPS methods. The adsorption studies of MB removal with UV-vis spectrometry showed that the adsorption performance of the prepared materials strongly depended on their morphology and the type of the organic adsorbent. The adsorption studies presented the highest effectiveness in neutral pH with only a slight effect on ionic strength. The MB removal undergoes pseudo-second kinetics for all adsorbents. The maximal adsorption capacity for the coffee@Fe₃O₄-2, cellulose@Fe₃O₄-1, and algae@Fe₃O₄-1 is 38.23 mg g^-1, 41.61 mg g^-1, and 48.41 mg g^-1, respectively. The mechanism of MB adsorption follows the Langmuir model using coffee@Fe₃O₄ and cellulose@Fe₃O₄, while for algae@Fe₃O₄ the process fits to the Redlich-Peterson model. The removal efficiency analysis based on UV-vis adsorption spectra revealed that the adsorption effectiveness of the nanocomposites increased as follows: coffee@Fe₃O₄-2 > cellulose@Fe₃O₄-1 > algae@Fe₃O₄-1, demonstrating an MB removal efficiency of up to 90%.

Synthesis of zeolite-doped polyaniline composite for photocatalytic degradation of methylene blue from aqueous solution

The generation of wastewater has increased rapidly with the expansion of industries, hence, posing a risk to human health and the environment. The development of novel materials and technologies for textile wastewater treatment is constantly evolving. In this work, the photocatalytic degradation of methylene blue employing ZSM-5 zeolite-doped polyaniline composites is presented. To fabricate ZSM-5-based polyaniline (PANI) composites, the simple approach of in situ oxidative polymerization has been adopted. Different weight ratios of ZSM-5 have been used for the synthesis, and samples have been labelled as PAZe-1, PAZe-5, and PAZe-10. Different characterization techniques were used to characterize the prepared composites, including field-emission scanning electron microscope (FESEM), transmission electron microscope (TEM), Fourier transform infrared (FT-IR), X-ray diffraction (XRD), and thermo-gravimetry analysis (TGA). The photocatalytic performance of polyaniline, ZSM-5, and their composites was assessed by monitoring the degradation of methylene blue in the presence of visible light. Degradation results of the polyaniline-doped composites were found to be better than that of the polyaniline alone. When the photocatalytic efficiencies of different composites were compared, the PAZe-1 showed the best performance, with 99.9% degradation efficiency after 210 min of irradiation, while PANI, PAZe-5, PAZe-10, and ZSM-5 show 38%, 82%, 71%, and 99% removal efficiency. Apart from methylene blue, the composite PAZe-1 was further explored for the degradation of other organic pollutants such as methyl orange, chlorpyrifos, 2,4-dichlorophenoxy acetic acid, and p-nitroaniline. To determine the reactive species involved in the photocatalysis mechanism, scavenger studies were performed.

Role of electrode and proton exchange membrane configurations on microbial fuel cell performance toward bioelectricity generation integrated wastewater treatment

In the present study, the effects of electrode surface area, proton exchange membrane area, and volume of the anodic chamber were investigated on the performance of five different dual chamber microbial fuel cells (MFC) using synthetic wastewater toward wastewater treatment coupled electricity generation. In the batch mode, the five different MFC's were operated with the anodic chamber volumes of 93-890 mL, 17.33-56.77 cm² electrode surface area, obtained volumetric power densities of 137.72-58.13 mW/m³, and unit area power densities ranging from 27.04 to 11.94 mW/m². Fed-batch studies were done with the MFC having 740 mL anodic chamber volume at different wastewater COD concentrations. The power density per unit area increased from 22.93 mW/m² to 36.25 cm² when the distance between electrodes was reduced from 10 to 6 cm. A maximum volumetric power density of 135.21 mW/m³ has been attained with a 6 cm electrode distance with the accomplished COD reduction of 93.21%. The presence of biofilm on the anode has been visualized through the SEM images. The higher COD concentration of wastewater and the fed-batch operation resulted in increased power output and wastewater treatment efficiency.

Scalable architecture of low-cost household microbial fuel cell for domestic wastewater treatment and simultaneous energy recovery

Researchers are still trying to achieve desirable results while treating actual wastewater at the field size when scaling up a microbial fuel cell (MFC). This pilot-scale project aimed to create a decentralised system for treating domestic wastewater and concurrent energy generation that may be used as a model for the decentralisation process. In this investigation, a cylindrical-shaped earthen membrane was utilized. The arrangement was deployed on-site at a residence for the treatment of domestic wastewater as well as simultaneous generation of power. From August until November 2021, the 36 L pilot-scale setup was operational for a period of 92 days. The setup's performance was affected by seasonal temperature variations during the operation period. The system's performance was measured in terms of COD, nitrate, and NH₃-N removal, with the highest results being 93.52 %, 84.93 %, and 74.78 %, respectively. The pilot-scale setup achieved the highest current of 43.7 mA, and the output voltage of the setup was boosted to 4.1 V using a power management system. The sustainable operation of pilot household MFC showed a positive indication for field application with a low-cost solution.

Microalgae-based wastewater treatment: Mechanisms, challenges, recent advances, and future prospects

The rapid expansion of both the global economy and the human population has led to a shortage of water resources suitable for direct human consumption. As a result, water remediation will inexorably become the primary focus on a global scale. Microalgae can be grown in various types of wastewaters (WW). They have a high potential to remove contaminants from the effluents of industries and urban areas. This review focuses on recent advances on WW remediation through microalgae cultivation. Attention has already been paid to microalgae-based wastewater treatment (WWT) due to its low energy requirements, the strong ability of microalgae to thrive under diverse environmental conditions, and the potential to transform WW nutrients into high-value compounds. It turned out that microalgae-based WWT is an economical and sustainable solution. Moreover, different types of toxins are removed by microalgae through biosorption, bioaccumulation, and biodegradation processes. Examples are toxins from agricultural runoffs and textile and pharmaceutical industrial effluents. Microalgae have the potential to mitigate carbon dioxide and make use of the micronutrients that are present in the effluents. This review paper highlights the application of microalgae in WW remediation and the remediation of diverse types of pollutants commonly present in WW through different mechanisms, simultaneous resource recovery, and efficient microalgae-based co-culturing systems along with bottlenecks and prospects.

Treatment of High-Polyphenol-Content Waters Using Biotechnological Approaches: The Latest Update

Polyphenols and their intermediate metabolites are natural compounds that are spread worldwide. Polyphenols are antioxidant agents beneficial for human health, but exposure to some of these compounds can be harmful to humans and the environment. A number of industries produce and discharge polyphenols in water effluents. These emissions pose serious environmental issues, causing the pollution of surface or groundwater (which are used to provide drinking water) or harming wildlife in the receiving ecosystems. The treatment of high-polyphenol-content waters is mandatory for many industries. Nowadays, biotechnological approaches are gaining relevance for their low footprint, high efficiency, low cost, and versatility in pollutant removal. Biotreatments exploit the diversity of microbial metabolisms in relation to the different characteristics of the polluted water, modifying the design and the operational conditions of the technologies. Microbial metabolic features have been used for full or partial polyphenol degradation since several decades ago. Nowadays, the comprehensive use of biotreatments combined with physical-chemical treatments has enhanced the removal rates to provide safe and high-quality effluents. In this review, the evolution of the biotechnological processes for treating high-polyphenol-content water is described. A particular emphasis is given to providing a general concept, indicating which bioprocess might be adopted considering the water composition and the economic/environmental requirements. The use of effective technologies for environmental phenol removal could help in reducing/avoiding the detrimental effects of these chemicals. In addition, some of them could be employed for the recovery of beneficial ones.

Microbial electro deionization for waste water treatment - A critical review on methods, applications and mechanism

Electro deionization using microbial communities has been proven as a competent method for desalination and abatement of water pollution by removing ionic chemicals from the target waters. Microbial Desalination Cell (MDC) facilitates microbial deionization which can either support or be a substitute for the conventional desalination methods. Generation of electricity is accomplished by the bio electrochemical oxidation of organic compounds present as contaminants in wastewater which in turn attribute to the migration of ions in MDC system. The present review aims to elucidate the theory, principles and the application of microbial desalination cell and microbial fuel cell (MFC) in treatment of saline and wastewaters. Air cathode MDC and stacked MDC for purification of saline water are found to give promising results. Air pump assisted microbial desalination cell reported 150.39 ppm h^-1 of salt removal with an operational time period of 80 h and showed consistent results. Hence the air cathode assisted MDC showed dominant capacity of salt removal compared to stacked MDC. Also, three major types of microbial fuel cell, namely photosynthetic biofilm MFC, constructive wetland MFC and ceramic membrane supported MFC are reviewed for their potentials in wastewater treatment by deionization method and electricity generation. Complete (100%) removal of chemical oxygen demand was reported by photosynthetic microbial fuel cell operated for 16 days having 435.8 Ω of external resistance. When constructive wetland microbial fuel cell was operated for 10 days with 1000 ohms of external resistance, it exhibited complete (100%) removal of chemical oxygen demand from the wastewater. About 92% of chemical oxygen demand removal was demonstrated by ceramic membrane supported microbial fuel. Compared to ceramic membrane microbial fuel cell, photosynthetic and constructive wetland microbial fuel cell displayed better performance in terms of pollutant removal capacity and economical factor. Ability of the electrogenic species, namely Geobacter, Shewanella, Clostridium and Bacillus and the photosynthetic species, namely Chorella Vulgaris Rhodopsuedomonas, and Scenedesmus abundans in microbial deionization methods and their performance levels reported by several researchers are presented.

Sustainable treatment of dye wastewater by recycling microalgal and diatom biogenic materials: Biorefinery perspectives

Discharge of untreated or partially treated toxic dyes containing wastewater from textile industries into water streams is hazardous for environment. The use of heavy metal(s) rich dyes, which are chemically active in azo and sulfur content(s) has been tremendously increasing in last two decades. Conventional physical and chemical treatment processes help to eliminate the dyes from textile wastewater but generates the secondary pollutants which create an additional environmental problem. Microalgae especially the diatoms are promising candidate for dye remediation from textile wastewater. Nanoporous diatoms frustules doped with nanocomposites increase the wastewater remediation efficiency due to their adsorption properties. On the other hand, microalgae with photosynthetic microbial fuel cell have shown significant results in being efficient, cost effective and suitable for large scale phycoremediation. This integrated system has also capability to enhance lipid and carotenoids biosynthesis in microalgae while simultaneously generating the bioelectricity. The present review highlights the textile industry wastewater treatment by live and dead diatoms as well as microalgae such as Chlorella, Scenedesmus, Desmodesmus sp. etc. This review engrosses applicability of diatoms and microalgae as an alternative way of conventional dye removal techniques with techno-economic aspects.

Interrelation between macrophytes roots and cathode in constructed wetland-microbial fuel cells: Further evidence

As an essential component in constructed wetland-microbial fuel cells (CW-MFC) system, the macrophytes play multiple roles in bioelectricity generation and decontaminants performance. However, the interrelation between macrophytes roots and cathode has not been fully investigated despite the fact that plant cultivation strategy is a critical issue in practice. For the first time, this study was designed to explore the interaction between macrophytes and cathode in CW-MFC by planting Cyperus altrnlifolius at relatively different positions from the cathode. The results showed that plants exhibited higher bioelectricity generation and dramatically improved pollution removal, as well as the improved richness and diversity of cathode microbes. More significantly, the relative locations between the plant roots and the cathode could lead to different cathode working patterns, while the optimal cathode pattern "plant root-assisted bio- & air-cathode" was formed when the plant roots are directly placed on the air-cathode layer in CW-MFC. The insight into the plant root and cathode relationship lies in whether the "multi-function cathode" can be established. This study contributes to increase the knowledge regarding the presence and behavior of plant roots and cathode throughout a CW-MFC system.

Development of electrodes integrated hybrid constructed wetlands using organic, construction, and rejected materials as filter media: Landfill leachate treatment

This study developed microbial fuel cell (MFC)-based hybrid constructed wetland systems using different filter media, i.e., organic (biochar), construction (sand), and rejected (iron particle, concrete particle, and stone dust) materials, and evaluated the performance of the developed systems for treating landfill leachate. The mean ammonium nitrogen (NH₄-N), total nitrogen (TN), total phosphorus (TP), biochemical oxygen demand (BOD), chemical oxygen demand (COD) removal percentages within the hybrid systems ranged between 91 and 98%, 90 and 98%, 97 and 99%, 88 and 93%, 93 and 97%, respectively, despite higher pollutants concentration in leachate wastewater. The aerobic environment in the cathode compartment (due to intermittent load) and free-draining of wastewater (from cathode to anode compartment) supported electrochemically inactive, active pollutants removal in the electrodes integrated first stage vertical flow (VF) wetlands. The second stage electrodes integrated horizontal flow (HF) wetlands supported electrochemical-based organic removal and nitrification because of efficient organic removal in the previous VF wetland stages. Nitrogen, phosphorus accumulation percentages in plant tissues ranged between 0.3 and 7%, 0.4 and 14%, respectively. Nutrient removal was achieved through chemical and microbial routes. The biochar-packed VF wetland produced a maximum power density of 20.6 mW/m². The coexistence of unsaturated, saturated media in the partially saturated HF wetland maintained the required environmental gradient between the electrodes and improved operational performance.

Nutrient removal and recovery from wastewater by microbial fuel cell-based systems - A review

Microbial fuel cell (MFC) is a green innovative technology that can be employed for nutrient removal/recovery as well as for energy production from wastewater. This paper summarizes the recent advances in the use of MFCs for nutrient removal/recovery. Different configurations of MFCs used for nutrient removal are first described. Different types of nutrient removal/recovery mechanisms such as precipitation, biological uptake by microalgae, nitrification, denitrification and ammonia stripping occurring in MFCs are discussed. Recovery of nutrients as struvite or cattiite by precipitation, as microalgal biomass and as ammonium salts are common. This review shows that while higher nutrient removal/recovery is possible with MFCs and their modifications compared to other techniques as indicated by many laboratory studies, field-scale studies and optimization of operational parameters are needed to develop efficient MFCs for nutrient removal and recovery and electricity generation from different types of wastewaters.

A review on the current status and post-pandemic prospects of third-generation biofuels

The rapid increase in fossil fuel depletion, environmental degradations, and industrialization have encouraged the need and production of sustainable fuel alternatives. This has led to the increase in interest in biofuels, especially third-generation biofuels produced from microalgae since they do not compete with food and land supplies. However, the global share for these biofuels has been inadequate recently, especially due to the ongoing global pandemic. Therefore, this paper offers a review of the state-of-the-art study of the production field of third-generation biofuel from microalgae. The current review aims to focus on the different aspects of algal biofuel production that requires further attention to produce it at a large scale. It was found that several strategies during the life cycle of algal biofuel production can significantly increase its quality and yield while reducing cost, energy, and other related attributes. This paper also focuses on the challenges for large-scale production of third-generation biofuels pre and post COVID-19 to better understand the barriers. The high cost of this fuel’s production and sale tends to be the major reason behind the lack of large-scale production, hence, inadequacy to meet the global need. Third-generation biofuel has so much to offer including many integrated applications and advanced uses in the future fuel industry. Therefore, it is important to cope with the ongoing circumstances and emphasize the future of algal biofuel as a sustainable source.

Mitigation of tannery effluent with simultaneous generation of bioenergy using dual chambered microbial fuel cell

In this study, a dual chambered microbial fuel cell (MFC) was fabricated for the treatment of tannery wastewater with concurrent production of bio-energy. The tannery effluent acts as an anolyte and a synthetic electrolytic solution as the catholyte. Five electrochemically active bacteria from the biofilm were isolated that showed homology with Klebsiella quasipneumoniae, Klebsiella pneumoniae, Cloacibacterium normanese, Bacillus firmus and Pseudomonas reactans, using 16S rDNA analysis. The physiochemical studies of treated wastewater showcased the 88%, 74% and 94% reduction in COD, BOD and TDS level, respectively. The maximum voltage output and power density obtained using electroactive consortium in MFC was 940 mV and 7371 mW/cm³, respectively. The techno-economic feasibility of the bio-electrochemical system was studied for future bioprospecting. The present study reports a significant power generation with simultaneous effluent treatment up to a maximum of ∼85%, in a sustainable and eco-friendly manner.

Improvement of zero waste sustainable recovery using microbial energy generation systems: A comprehensive review

Microbial energy generation systems, i.e., bioelectrochemical systems (BESs) are promising sustainable technologies that have been used in different fields of application such as biofuel production, biosensor, nutrient recovery, wastewater treatment, and heavy metals removal. However, BESs face great challenges such as large-scale application in real time, low power performance, and suitable materials for their configuration. This review paper aimed to discuss the use of BES systems such as conventional microbial fuel cells (MFCs), as well as plant microbial fuel cell (P-MFC), sediment microbial fuel cell (S-MFC), constructed wetland microbial fuel cell (CW-MFC), osmotic microbial fuel cell (OsMFC), photo-bioelectrochemical fuel cell (PBFC), and MFC-Fenton systems in the zero waste sustainable recovery process. Firstly, the configuration and electrode materials used in BESs as the main sources to improve the performance of these technologies are discussed. Additionally, zero waste recovery process from solid and wastewater feedstock, i.e., energy recovery: electricity generation (from 12 to 26,680 mW m^-2) and fuel generation, i.e., H₂ (170 ± 2.7 L^-1 L^-1 d^-1) and CH₄ (107.6 ± 3.2 mL^-1 g^-1), nutrient recovery of 100% (PO₄³-P), and 13-99% (NH₄⁺-N), heavy metal removal/recovery: water recovery, nitrate (100%), sulfate (53-99%), and sulfide recovery/removal (99%), antibiotic, dye removal, and other product recovery are critically analyzed in this review paper. Finally, the perspective and challenges, and future outlook are highlighted. There is no doubt that BES technologies are an economical option for the simultaneous zero waste elimination and energy recovery. However, more research is required to carry out the large-scale application of BES, as well as their commercialization.

Bio-energy generation and treatment of tannery effluent using microbial fuel cell

In this study, Graphite Particle (GP) and Carbon Cloth (CC) are employed as anode electrodes to study both bio-energy generation, and decrease of Chemical Oxygen Demand (COD) simultaneously using tannery effluent. The influence of electrodes distance (10 cm and 20 cm) on electricity production was evaluated. COD removal level of GP (75%) and CC (60%), maximum power outputs for 10 cm distance (600 ± 5 mW m^-2) & (500 ± 10 mW m^-2) and for 20 cm distance (520 ± 5 mW m^-2) and also (430 ± 20 mW m^-2) GP and CC were noted correspondingly. The outcomes of different parameters of MFC namely pH, conductivity, COD concentration, membrane thickness and size of bio-energy generation from tannery effluent in the MFC were investigated. The experimental results reveal that electrode provides highest power output with 10 cm distance between anode and cathode chamber. As a result, GP electrode is gradually viable, biocompatible, effective and adaptable for field application in MFC. The GP electrode has high potential for more power output, when compared to the CC electrode. The MFC system performance was improved with increasing effluent COD concentration (2340-4720 ppm), anolyte conductivity (1.6-8.1 mS cm^-1) and membrane area (9-20 cm²). The system working with conductivity of 8.1 mS cm^-1 and its effluent COD concentration of 4720 ppm generated the maximum peak power density of 44.69 mW m^-2 with respective current density of 109 mA m^-2. The findings thus show that considerable power production and effluent treatment can be achieved by MFC.

Algae as potential feedstock for various bioenergy production

Depletion of non-renewable feedstock and severe wastewater pollution due to human activities have created negative impact to living organisms. The potential solution is to implement wastewater treatment and bioelectricity production through algae-based microbial fuel cell. The algae biomass produced from microbial fuel cell could be further processed to generate biofuels through their unique compositions. The consumption of nutrients in wastewater through algae cultivation and biomass produced to be utilized for energy supply have showed the potential of algae to solve the issues faced nowadays. This review introduces the background of algae and mitigation of wastewater using algae as well as the bioenergy status in Malaysia. The mechanisms of nutrient assimilation such as nitrogen, phosphorus, carbon, and heavy metals are included, followed by the application of algae in microbial fuel cell's chambers. Lastly, the status of algae for bioenergy production are covered.

Effectiveness of constructed wetland integrated with microbial fuel cell for domestic wastewater treatment and to facilitate power generation

Constructed wetlands (CWs) have gained a lot of attention for wastewater treatment due to robustness and natural pollutant mitigation characteristics. This widely acknowledged technology possesses enough merits to derive direct electricity in collaboration with microbial fuel cell (MFC), thus taking advantage of microbial metabolic activities in the anoxic zone of CWs. In the present study, two identical lab-scale CWs were selected, each having 56 L capacity. One of the CW integrated with MFC (CW-MFC) contains two pairs of electrodes, i.e., carbon felt and graphite plate. The first pair of CW-MFC consists of a carbon felt cathode with a graphite plate anode, and the second pair contains a graphite plate cathode with a carbon felt anode. The other CW was not integrated with MFC and operated as a traditional CW for evaluating the performance. CW-MFC and CW were operated in continuous up-flow mode with a hydraulic retention time of 3 days and at different organic loading rates (OLRs) per unit surface area, such as 1.45 g m^-2 day^-1 (OLR-1), 2.43 g m^-2 day^-1 (OLR-2), and 7.25 g m^-2 day^-1 (OLR-3). The CW-MFC was able to reduce the organic matter, phosphate, and total nitrogen by 92%, 93%, and 70%, respectively, at OLR of 1.45 g m^-2 day^-1, which was found to be higher than that obtained in conventional CW. With increase in electrochemical redox activities, the second pair of electrodes made way for 3 times higher power density of 16.33 mW m^-2 as compared to the first pair of electrodes in CW-MFC (5.35 mW m^-2), asserting carbon felt as a good anode material to be used in CW-MFC. The CW-MFC with carbon felt as an anode material is proposed to improve the electro-kinetic activities for scalable applications to achieve efficient domestic wastewater treatment and electricity production.

Review on hydrothermal liquefaction aqueous phase as a valuable resource for biofuels, bio-hydrogen and valuable bio-chemicals recovery

Hydrothermal liquefaction (HTL) of biomass results in the formation of bio-oil, aqueous phase (HTL-AP), bio-char, and gaseous products. Safer disposal of HTL-AP is difficult on an industrial scale since it comprises low molecular acid compounds. This review provides a comprehensive note on the recent articles published on the effective usage of HTL-AP for the recovery of valuable compounds. Thermo-chemical and biological processes are the preferred techniques for the recovery of biofuel, platform chemicals from HTL-AP. From this review, it was evident that the composition of HTL-AP and product recovery are the integrated pathways, which depend on each other. Substitute as reaction medium in HTL process, growth medium for algae and microbes are the most common mode of reuse and recycle of HTL-AP. Future research is needed to depict the mechanism of HTL process when HTL-AP is used as a reaction medium on an industrial scale. Need to find a solution for the hindrance in commercializing HTL process and recovery of value-added compounds from HTL-AP from lab scale to industry level. Integrated pathways on reuse and HTL-AP recycle helps in reduced environmental concerns and sustainable production of bio-products.

Effect of cathodic culture on wastewater treatment and power generation in a photosynthetic sediment microbial fuel cell (SMFC): Canna indica v/s Chlorella vulgaris

The aim of this work was to compare the performance of the two types of photosynthetic microbial fuel cells (MFCs) fed with real wastewater- one having plant Canna indica (PMFC) and the other having alga Chlorella vulgaris (AMFC) at the cathode. The chemical oxygen demand (COD), phosphate, and nitrate removal stood at 57.16% 88.81%, 59.82% for PMFC and 65.27%, 95.59%, 66.61% for the AMFC. While AMFC was slightly superior in water treatment, the power output was 6 times higher in PMFC (22.76 mW m^-2) than the AMFC (3.64 mW m^-2). The biomass growth was good in both systems, with biomass productivity of 0.031 Kg m^-3 day^-1 in AMFC and a leaf area index of 0.006 in PMFC. The study's findings suggest that PMFCs are equally good or even better than AMFCs when the goal is simultaneous water treatment and power generation.

A taxonomy of design factors in constructed wetland-microbial fuel cell performance: A review

The past decade has seen the rapid development of constructed wetland-microbial fuel cell (CW-MFC) technology in many aspects. The first publication on the combination of constructed wetland (CW) and microbial fuel cell (MFC) appeared in 2012, subsequently, research on the subject has grown exponentially to improve the performance of CW-MFCs in their dual roles of wastewater treatment and power generation. Although significant research has been conducted on this technology worldwide, a comprehensive and critical review of effective controlling parameters is lacking. More broadly, research is needed to draw up-to-date conclusions on recent developments and to identify knowledge gaps for further studies. This review paper systematically enumerates and reviews research studies published in this area to determine the key design factors and their role in CW-MFC performance. Moreover, a taxonomy of all CW-MFC design parameters has been synthesised from the literature. Importantly, this original work provides a comprehensive conceptual framework for future researchers, designers, builders, and users to understand CW-MFC technology. Within the taxonomy, parameters are placed in three main categories (physical/environmental, chemical, and biological/electrochemical) and comprehensive details are given for each parameter. Finally, a comprehensive summary of the parameters has been tabulated showing their impact on CW-MFC operation, design recommendations from literature, and the significant research gaps that this review has identified within the existing literature. It is hoped that this paper will provide a clear and rich picture of this technology at its current stage of development and furthermore, will facilitate a deeper understanding of CW-MFC performance for long-term and large-scale development.