Simultaneous removal of organic pollutants and heavy metals in wastewater by photoelectrocatalysis: A review

Progress and challenges in the use of electrochemical oxidation and reduction processes for heavy metals removal and recovery from wastewaters

Heavy metals-laden industrial wastewater represents both a threat to ecosystems and human health and, in some instances, a potential source of valuable metals however the presence of organic ligands that bind the metals in heavy metal complexes (HMCs) renders metal removal (and, where appropriate, recovery) difficult. Electrochemical-based oxidation and reduction processes represent a potentially promising means of degrading the organic ligands and reducing their ability to retain the metals in solution. In this state-of-the-art review, we provide a comprehensive overview of the current status on use of electrochemical redox technologies for organic ligand degradation and subsequent heavy metal removal and recovery from industrial wastewaters. The principles and degradation mechanism of common organic ligands by various types of electrochemical redox technologies are discussed in this review and consideration given to recent progress in electrode materials synthesis, cell architecture, and operation of electrochemical redox systems. Furthermore, we highlight the current challenges in application of electrochemical redox technologies for treatment of HMC-containing wastewaters including (i) limited understanding of the chemical composition of industrial wastewaters, (ii) constrained mass transfer process affecting the direct/indirect electron transfer, (iii) absence of approaches to convert recovered metal into high-value-added products, and (iv) restricted semi-or full-industrial-scale application of these technologies. Potential strategies for improvement are accordingly provided to guide efforts in addressing these challenges in future research.

Synthesis of a novel bismuth molybdite/iron oxide thin film for oxytetracycline degradation in a photoelectrocatalytic system

In this study, heterostructures based on Bismuth molybdite/iron oxide (Bi2MoO6/Fe2O3) thin films were fabricated by a dip-coating technique using precursor solutions. The heterostructures were deposited on fluorine-doped tin oxide glass substrates. From a detailed characterization using X-ray diffraction and X-ray photoelectron spectroscopy, the formation of the orthorhombic phase for Bi2MoO6 and the co-existence of hematite and maghemite in Fe2O3 was demonstrated. Meanwhile, the field emission scanning electron microscopy cross-section images confirm the formation of well-defined Bi2MoO6 film under the Fe2O3 deposition. The optical band gap energies for the heterostructure obtained were estimated from the diffuse reflectance spectra and ranged from 2.3 to 3.5 eV. Photoluminescence analysis revealed an improved separation and faster transfer of photogenerated electrons and holes for the Bi2MoO6/Fe2O3 (Het) film. The best oxytetracycline (OTC) removal percentage through photoelectrocatalytic treatment was 96.85% using the Het. Besides, were carried out the variation of parameters which affect the OTC photoelectrocatalytic degradation as pH, potential applied, and scavenger assay. The 1O2 was the oxidant predominate, which attack the OTC ring to initiate and accelerate the degradation process. Based on the analysis of degradation intermediates and characteristics of Bi2MoO6/Fe2O3, possible degradation pathways and mechanisms of OTC were displayed. An enhancement of oxytetracycline degradation efficiency of Het fabricated compared to pristine oxides was achieved mainly due to avoid the charge recombination of photogenerated electron-hole pairs provided by Direct Z-scheme heterostructure. Finally, the Het fabricated represents a promising material for efficient and sustainable pharmaceutical removal applications.

Synthesis of Fe2O3/TiO2 Photocatalytic Composites for Methylene Blue Degradation as a Novel Strategy for High-Value Utilisation of Iron Scales

In this study, novel Fe2O3/TiO2 photocatalytic composites were synthesised by combining traditional oxidation roasting with the sol-gel method, using low-cost metallurgical waste (iron scales) as the raw material. The characterisation results revealed that the oxidised iron scales could be transformed into high-purity and porous Fe2O3 particles through oxidation roasting, thereby providing additional sites for the adsorption process and thus serving as an effective carrier for TiO2-based photocatalytic materials. During the sol-gel process, TiO2 was loaded onto the synthesised Fe2O3 particles, generating core-shell heterostructure Fe2O3/TiO2 photocatalytic composites. Under visible light irradiation for 90 min, the Fe2O3/TiO2 photocatalytic composites achieved a remarkable methylene blue removal rate (97.71%). This reaction process followed the quasi-first-order kinetic model with a rate constant of 0.038 min-1. The results have demonstrated that this combination of various components in the Fe2O3/TiO2 photocatalytic composites improved the adsorption, light utilisation, and charge separation effect of the photocatalysts. Moreover, the material exhibited favourable stability and recyclability, making it a decent candidate for the treatment of wastewater from the biochemical industry. Therefore, this study provides a new strategy for improving the photocatalytic activity of TiO2 and expanding the high value-added utilisation of iron scales.

Environmental assessment of toxic heavy metals in bottom sediments of the Sharm Obhur, Jeddah, Saudi Arabia

The concentrations, spatial distributions, pollution level, and health risks of heavy metals in sediments of the Sharm Obhur, Northern Jeddah, Saudi Arabia were evaluated. Average concentrations were found to be: Cr > Zn > Ni > Cu > As>Pb with the highest concentrations found near the head of the sharm, and decreasing towards the mouth. Environmental indices, together with the statistical analyses, showed that the sharm experiences a low to moderate degree of pollution. Sampling sites with heavy metal contamination are concentrated near the head and the southern coast of the sharm, where intensive human activities associated with a boat dock, construction, and recreation are common. The mean carcinogenic risk (CR) values of As, Cr and Ni are at permissible level suggesting unlikely adverse impacts of heavy metals on human health. Despite acceptable CR values; however, serious non-carcinogenic and carcinogenic health threats from metals may yet be an issue particularly for sensitive populations such as children.

Four-in-one multifunctional self-driven photoelectrocatalytic system for water purification: Organics degradation, U(VI) reduction, electricity generation and disinfection against bacteria

This study addresses the energy-intensive nature of conventional wastewater treatment processes and proposes a solution through the development of a green, low-energy, and multifunctional wastewater treatment technology. The research focuses on a multifunctional self-driven photoelectrocatalytic (PEC) system, exploring its four-in-one applications in eliminating organic pollutants, reducing U(VI), generating electrical energy, and disinfecting pathogenic microorganisms. A TiO2-decorated carbon felt (CF@TiO2) cathode is synthesized to enhance interfacial charge transfer, with TiO2 coating improving surface binding sites (edge TiO and adsorbed -OH) for UO22+ adsorption and reduction. The self-driven PEC system, illuminated solely with simulated sunlight, exhibits remarkable efficiency in removing nearly 100 % of uranium within 0.5 h and simultaneously degrading 99.9 % of sulfamethoxazole (SMX) within 1.5 h, all while generating a maximum power output density (Pmax) of approximately 1065 μW·cm-2. The system demonstrates significant anti-interference properties across a wide pH range and coexisting ions. Moreover, 49.4 % of the fixed uranium on the cathode is reduced into U(IV) species, limiting its migration. The self-driven PEC system also excels in detoxifying various toxic organic compounds, including tetracycline, chlortetracycline, and oxytetracycline, and exhibits exceptional sterilization ability by disinfecting nearly 100 % of Escherichia coli within 0.5 h. This work presents an energy-saving, sustainable, and easily recyclable wastewater purification system with four-in-one capabilities, relying solely on sunlight for operation.

Novel Ag3PO4/ZnWO4-modified graphite felt electrode for photoelectrocatalytic removal of harmful algae: Performance and mechanism

A novel Ag3PO4/ZnWO4-modified graphite felt electrode (AZW@GF) was prepared by drop coating method and applied to photoelectrocatalytic removal of harmful algae. Results showed that approximately 99.21% of chlorophyll a and 91.57% of Microcystin-LR (MCLR) were degraded by the AZW@GF-Pt photoelectrocatalytic system under the optimal operating conditions with a rate constant of 0.02617 min-1 and 0.01416 min-1, respectively. The calculated synergistic coefficient of photoelectrocatalytic algal removal and MC-LR degradation by the AZW@GF-Pt system was both larger than 1.9. In addition, the experiments of quenching experiments and electron spin resonance (ESR) revealed that the photoelectrocatalytic reaction mainly generated •OH and •O2- for algal removal and MC-LR degradation. Furthermore, the potential pathway for photoelectrocatalytic degradation of MC-LR was proposed. Finally, the photoelectrocatalytic cycle algae removal experiments were carried out on AZW@GF electrode, which was found to maintain the algae removal efficiency at about 91% after three cycles of use, indicating that the photoelectrocatalysis of AZW@GF electrode is an effective emergency algae removal technology.

Muscovite clay for methylene blue removal: advanced optimization and Al-guided breakthroughs-an independent application from prior antibiotic removal investigation

This study evaluates the efficacy of muscovite mineral clay as an adsorbent for removing Methylene Blue (MB) from water-based solutions. The research examined the impact of initial MB concentration, adsorbent mass, and time on the MB removal process. Two modeling techniques, namely Box-Behnken design with response surface methodology (BBD-RSM) and Artificial Neural Network (ANN), were employed to accurately predict the MB removal efficiency. The RSM and ANN models yielded satisfactory results in estimating MB removal efficiency. To further enhance the optimization process, conventional and techno-economic methods were implemented. The conventional method aimed to maximize dye removal efficiency (R), while the techno-economic approach incorporated multiple objectives. The comparative analysis demonstrated that the techno-economic optimization method outperformed the conventional method. This study emphasizes the significance of considering multiple objectives and integrating techno-economic factors in optimizing clay adsorption processes. The successful application of the techno-economic optimization approach highlights its potential as a robust optimization method, particularly in the field of wastewater treatment. The findings provide valuable insights for optimizing adsorption and advancing environmental remediation practices.

Multivariate optimization of methylene blue dye degradation using electro-Fenton process with self-doped TiO2 nanotube anode

This paper reports the optimization of the electro-Fenton (EF) process using different anode materials for the degradation of Methylene Blue (MB) dye as a model compound. The cathode used was an air-diffusion PTFE, while three different anode materials (Pt, DSA, and self-doped TiO2 nanotubes - SD-TNT) were tested individually. A full factorial design (FFD) with a central point combined with response surface methodology (RSM) was employed to optimize the experimental variables, including solution pH, applied current, and anode material. The optimized EF conditions involved a pH of 4.0, a current of 100 mA, and an SD-TNT anode for 120 min of electrolysis. Under these conditions, the MB solution achieved complete decolorization and 45% of total organic carbon (TOC) removal after 120 min of EF treatment. The findings indicate that the hydroxyl radical (•OH) plays a crucial role as the primary oxidizing agent in the EF process. The decay of MB followed pseudo-first-order kinetics, reflecting a consistent formation of •OH radicals that effectively attacked the MB dye and its subproducts during mineralization. Moreover, the EF process exhibited superior performance in terms of energy consumption (EC) and mineralization current efficiency (ECM) in the initial treatment stages, while the presence of recalcitrant by-products and loss of anode self-doping impacted performance in the later stages. The optimized EF conditions and the understanding gained from this study contribute to the advancement of sustainable wastewater treatment strategies for the removal of organic dyes.

Coordination-Driven Heterochiral Self-Assembly: Construction of Cd(II) Coordination Polymers with Sorption Behaviors for Iodine and Dyes

A racemic bispyridyl ligand (L) was synthesized via a Schiff base condensation reaction. Four Cd(II) complexes, {[CdL2Cl2]·2DMF}n (1), [CdLI2]n (2), {[CdL2Br2]·4H2O}n (3), and {[CdL2(H2O)2](NO3)2·2CH3OH·8H2O}n (4), were synthesized and further characterized based on this ligand. Single-crystal structures show that the coordination-driven assembly of the bispyridyl ligand with Cd(II) salts bearing different counteranions can lead to multidimensional coordination polymers via a heterochiral self-discrimination process. Complex 1 exists as a one-dimensional (1D) looped chain polymer, and complex 2 exists as a 1D zigzag chain polymer. Complex 3 is a 2D grid coordination polymer, and complex 4 exists as a 3D framework polymer. Furthermore, the iodine sorption capacities of the four complexes were investigated in the solution of n-hexane and water as well as in the iodine steam. The dye sorption behaviors were investigated in water, which showed that complex 2 exhibited good adsorption for crystal violet (CV), while complex 4 had good adsorption capability toward direct yellow 4 (DY).

Photoelectrocatalytic modification of nanofiltration membranes with SrF2/Ti3C2Tx to simultaneously enhance heavy metal ions rejection and permeability

Heavy metal pollution can significantly harm water systems and human health. Combining photoelectrocatalytic (PEC) and nanofiltration (NF) membrane separation technologies can effectively remove heavy metal ions from wastewater. In this study, a water bath method was used to form SrF2/Ti3C2Tx (ST) nanoparticles on the surface of polyvinylidene fluoride (PVDF) membranes and an additional polyamide (PA) functional layer was formed at the interface by crosslinking. ST@PA composite NF membranes (STPP) with good photocatalytic performance were obtained. The separation and catalytic properties of the STPP membranes were controlled by the ST content, which modifies the surface structure and properties of the membranes. The membrane with optimal ST crosslinking exhibited a water contact angle of 50.8°, pure water flux of 24.6 L·m-2·h-1·bar-1, and rejection rates of Mn2+, Ni2+, Cu2+, and Zn2+ of 98.8%, 95.3%, 95.7%, and 97.3%, respectively, under PEC-assisted separation with visible light illumination from a Xe lamp (300 W) and an applied voltage (2 V). The STPP membranes showed improved rejection rates of heavy metal ions under PEC-assisted operation. The mechanism for the improved membrane performance under PEC conditions was preliminarily clarified considering the relationship between the photocatalytic and filtration properties of STPP membranes along with the influence of light irradiation and an external voltage on the heavy metal ions. The generation of electrons, holes, superoxide radicals, and hydroxyl radicals during membrane operation enhances the rejection rates of heavy metal ions. Based on these results, STPP membranes are considered a promising technology for industrial applications in heavy metal removal.

Adsorption of Rhodamine B and Pb(II) from aqueous solution by MoS2 nanosheet modified biochar: Fabrication, performance, and mechanisms

Mediated by polydopamine, MoS2 nanosheets were immobilized on the porous biochar derived from fungus residue, forming a novel biochar-based nanocomposite (MoS2-PDA@FRC) for the removal of Rhodamine B(RhB) and Pb(II) from water. Utilizing MoS2 nanosheets with abundant active adsorption sites, MoS2-PDA@FRC showed higher adsorption capacities than raw biochar, with 2.76 and 1.78 times higher capacities for RhB and Pb(II) respectively. MoS2-PDA@FRC also exhibited fast adsorption kinetics for RhB (120 min) and Pb (180 min) removal, as well as satisfactory adsorption selectivity in the presence of coexisting substances. The underlying removal mechanism was explored via Fourier transform infrared and X-ray photoelectron spectroscopies. Furthermore, during cyclic adsorption-regeneration and the fixed-bed adsorption experiments, the nanocomposite removed RhB and Pb(II) with high effectiveness and stability. Collectively, the results demonstrated the bright prospects of MoS2-PDA@FRC as a highly efficient decontamination agent of RhB and Pb(II) from water.

Removal of pharmaceuticals and personal care products from wastewater via anodic oxidation and electro-Fenton processes: current status and needs regarding their application

This review provides a current opinion on the most recent works that have been published toward the application of electrochemical advance oxidation processes (EAOPs) for the degradation of pharmaceutical and personal care products (PPCPs) in water streams. Advances in the application of anodic oxidation (AO)- and electro-Fenton (EF)-based processes are reported, including operational conditions, electrode performance, and removal. Although AO- and EF-based processes can easily reach 100% removal of PPCPs, mineralization is desirable to avoid the generation of potential toxic byproducts. The following section exploring some techno-economic aspects of the application of EAOPs is based on electrode selection, operational costs as well as their use as cotreatments, and their synergistic effects. Finally, this short review ends with perspectives about the emerging topics that are faced by these technologies applied for the degradation of PPCPs in research and practice.

A novel continuous all-weather photo-electric synergistic treatment system for refractory organic compounds and its application in degrading enrofloxacin

A novel continuous all-weather photo-electric synergistic treatment system was proposed in this study for refractory organic compounds, which overcame the defects of conventional photo-catalytic treatments that rely on light irradiation and thus cannot achieve all-weather continuous treatment. The system used a new photocatalyst (MoS2/WO3/carbon felt) with the characteristics of easy recovery and fast charge transfer. The system was systematically tested in degrading enrofloxacin (EFA) under real environmental conditions in terms of treatment performance, pathways and mechanisms. The results showed that the EFA removal of photo-electric synergy substantially increased by 1.28 and 6.78 times, compared to photocatalysis and electrooxidation, respectively, with an average removal of 50.9% under the treatment load of 832.48 mg m-2 d-1. Possible treatment pathways of EFA and mechanism of the system were found to be mainly the loss of piperazine groups, the cleavage of the quinolone portion and the promotion of electron transfer by bias voltage.

Simultaneous removal of pharmaceuticals and heavy metals from aqueous phase via adsorptive strategy: A critical review

The coexistence of pharmaceuticals and heavy metals is regarded as a serious threat to aquatic environments. Adsorbents have been widely applied to the simultaneous removal of pharmaceuticals and metals from aqueous phase. Through a comprehensive review, behaviors that promote, inhibit, or have no effect on simultaneous adsorption of pharmaceuticals and heavy metals were found to depend on the system of contaminants and adsorbents and their environmental conditions, such as: characteristics of adsorbent and pollutant, temperature, pH, inorganic ions, and natural organic matter. Bridging and competition effects are the main reasons for promoting and inhibiting adsorption in coexisting systems, respectively. The promotion is more significant in neutral or alkaline conditions. After simultaneous adsorption, a solvent elution approach was most commonly used for regeneration of saturated adsorbents. To conclude, this work could help to sort out the theoretical knowledge in this field, and may provide new insights into the prevention and control of pharmaceuticals and heavy metals coexisting in wastewater.

Application of Electrochemical Oxidation for Water and Wastewater Treatment: An Overview

In recent years, the discharge of various emerging pollutants, chemicals, and dyes in water and wastewater has represented one of the prominent human problems. Since water pollution is directly related to human health, highly resistant and emerging compounds in aquatic environments will pose many potential risks to the health of all living beings. Therefore, water pollution is a very acute problem that has constantly increased in recent years with the expansion of various industries. Consequently, choosing efficient and innovative wastewater treatment methods to remove contaminants is crucial. Among advanced oxidation processes, electrochemical oxidation (EO) is the most common and effective method for removing persistent pollutants from municipal and industrial wastewater. However, despite the great progress in using EO to treat real wastewater, there are still many gaps. This is due to the lack of comprehensive information on the operating parameters which affect the process and its operating costs. In this paper, among various scientific articles, the impact of operational parameters on the EO performances, a comparison between different electrochemical reactor configurations, and a report on general mechanisms of electrochemical oxidation of organic pollutants have been reported. Moreover, an evaluation of cost analysis and energy consumption requirements have also been discussed. Finally, the combination process between EO and photocatalysis (PC), called photoelectrocatalysis (PEC), has been discussed and reviewed briefly. This article shows that there is a direct relationship between important operating parameters with the amount of costs and the final removal efficiency of emerging pollutants. Optimal operating conditions can be achieved by paying special attention to reactor design, which can lead to higher efficiency and more efficient treatment. The rapid development of EO for removing emerging pollutants from impacted water and its combination with other green methods can result in more efficient approaches to face the pressing water pollution challenge. PEC proved to be a promising pollutants degradation technology, in which renewable energy sources can be adopted as a primer to perform an environmentally friendly water treatment.

An in-depth insight into the simultaneous oxidation of sulfamethoxazole and reduction of Cr (VI) by one system of water film DBD plasma: The interaction effect, role of active species, and their dominant to pathways

This study aims to deeply investigate the simultaneous elimination of sulfamethoxazole (SMZ) and Cr (VI) through one system of water film dielectric barrier discharge (WFDBD) plasma. The interaction effect of SMZ degradation and Cr (VI) reduction and dominant effect of active species were highlighted. Results showed that the oxidation of SMZ and the reduction of Cr (VI) directly promote each other. When the concentration of Cr (VI) raised from 0 to 2 mg L^-1, the degradation rate of SMZ enhanced from 75.6% to 88.6%, respectively. Similarly, when the concentration of SMZ improved from 0 to 15 mg L^-1, the removal efficiency of Cr (VI) improved from 70.8% to 84.3%, respectively. ·OH, ¹O₂ and ·O₂^- play crical roles for SMZ degradation, and e^-, ·O₂^-, ·H and H₂O₂ dominated to the Cr (VI) reduction. The variations of pH, conductivity and TOC during the removal process were also explored. The removal process was studied by UV-vis spectroscopy and a three-dimensional excitation-emission matrix. Based on DFT calculation and LC-MS analysis, free radicals dominated SMZ degradation pathways in the WFDBD plasma system were clarified. Besides, the influence of Cr (VI) on SMZ degradation pathway was clarified. The ecotoxicity of SMZ and the toxicity of Cr (VI) into Cr (III) were greatly reduced. This study provides a significant reference value for the application and mechanism of plasma simultaneous removal of organic pollutants and heavy metals in wastewater.

Recent Developments of Light-Harvesting Excitation, Macroscope Transfer and Multi-Stage Utilization of Photogenerated Electrons in Rotating Disk Photocatalytic Reactor

The rotating disk photocatalytic reactor is a kind of photocatalytic wastewater treatment technique with a high application potential, but the light energy utilization rate and photo quantum efficiency still need to be improved. Taking photogenerated electrons as the starting point, the following contents are reviewed in this work: (1) Light-harvesting excitation of photogenerated electrons. Based on the rotating disk thin solution film photocatalytic reactor, the photoanodes with light capture structures are reviewed from the macro perspective, and the research progress of light capture structure catalysts based on BiOCl is also reviewed from the micro perspective. (2) Macroscope transfer of photogenerated electrons. The research progress of photo fuel cell based on rotating disk reactors is reviewed. The system can effectively convert the chemical energy in organic pollutants into electrical energy through the macroscopic transfer of photogenerated electrons. (3) Multi-level utilization of photogenerated electrons. The photogenerated electrons transferred to the cathode can also generate H2O2 with oxygen or H2 with H+, and the reduction products can also be further utilized to deeply mineralize organic pollutants or reduce the nitrate in water. This short review will provide theoretical guidance for the further application of photocatalytic techniques in wastewater treatment.

Nanostructured Gallium Nitride Membrane at Wafer Scale for Photo(Electro)catalytic Polluted Water Remediation

Photo(electro)catalysis methods have drawn significant attention for efficient, energy-saving, and environmental-friendly organic contaminant degradation in wastewater. However, conventional oxide-based powder photocatalysts are limited to UV-light absorption and are unfavorable in the subsequent postseparation process. In this paper, a large-area crystalline-semiconductor nitride membrane with a distinct nanoporous surface is fabricated, which can be scaled up to a full wafer and easily retrieved after photodegradation. The unique nanoporous surface enhances broadband light absorption, provides abundant reactive sites, and promotes the dye-molecule reaction with adsorbed hydroxyl radicals on the surface. The superior electric contact between the nickel bottom layer and nitride membrane facilitates swift charge carrier transportation. In laboratory tests, the nanostructure membrane can degrade 93% of the dye in 6 h under illumination with a small applied bias (0.5 V vs Ag/AgCl). Furthermore, a 2 inch diameter wafer-scale membrane is deployed in a rooftop test under natural sunlight. The membrane operates stably for seven cycles (over 50 h) with an outstanding dye degradation efficiency (>92%) and satisfied average total organic carbon removal rate (≈50%) in each cycle. This demonstration thus opens the pathway toward the production of nanostructured semiconductor layers for large-scale and practical wastewater treatment using natural sunlight.

Trends and characteristics of employing cavitation technology for water and wastewater treatment with a focus on hydrodynamic and ultrasonic cavitation over the past two decades: A Scientometric analysis

Cavitation-based technologies have emerged as a sustainable and effective way to treat natural waters and wastewater, considering their increasing scarcity due to pollution and climate change. For this reason, this work aimed to conduct a scientometric analysis on the topic of cavitation for water and wastewater treatment during the last 20 years, from 2001 to August 2022. We focused on hydrodynamic and ultrasonic cavitation as the prevalent methods of inducing cavitation. Furthermore, an in-depth study on the main trends regarding the number of publications and citations, keywords co-occurrence and evolution, and countries' publication trends was carried out to investigate the future direction of this research topic. The data was gathered from the Web of Science database and analyzed by the Visualization Of Similarities software. This work focused on: i) publication and citation trends, ii) scientific categories, iii) countries' contribution to the topic of cavitation, iv) prominent journals, v) keyword co-occurrence and cluster analysis, and vi) keyword evolution analysis. Results showed a significant increase in publications during the past 5 years. The scientific categories with the highest number of publications were "environmental sciences" and "environmental engineering," with a combined share of 19.4 % of publications. Keywords evolution analysis showed that limited focus was given to topics related to "energy" and "energy efficiency" in the field of cavitation, but with the rising importance of each process's sustainability, the attention given to these concepts will increase in the future. Future directions for the topic of cavitation-related water and wastewater treatments will shift towards more environmentally friendly applications of hydrodynamic and ultrasonic cavitation as well as towards more green and sustainable approaches to address the increasing water pollution problems and shortage. Moreover, it will include other uses besides water treatment such as manufacturing nanomaterials food production and medicine.

In situ recombination for durable photoelectrocatalytic degradation of organic dye in wastewater

Photoelectrocatalysis (PEC) can effectively degrade organic pollutants by using photoelectrodes without secondary pollution. However, significant mass transport resistance and decreased catalytic activity caused by the shedding of active components remain a barrier to achieving the photocatalytic system with a high degradation rate and long-term durability. Here, an in situ recombination concept is presented to overcome this challenge. The bionic coral-like electrode, obtained by in situ assembly of UIO-66 around TiO₂ nanoflowers (TNF) on Ti-foam substrate, is employed as the photoanode in PEC. Ex situ evaluation of photoelectrochemical activity demonstrates that the UIO-66@TNF/Ti-foam (U@T/T) design significantly improves the light-propagation, light-absorption and charge transfer. In Situ degradation evaluations also shows that the interesting design promotes rapid and stable degradation of organic dye (e.g. Rhodamine B (RhB)). At 2.0 V of bias potential and pH 7.0 in 5 mg L^-1 RhB, under the action of active species such as ·O₂^- and ·OH (proved by the degradation mechanism experiments), the removal rate of RhB can reach 96.1% at 120 min and almost complete removal at 200 min (99.1%).

Constructing Z-scheme NiMoO4@Co3O4 core-shell heterogeneous architectures with prominent photoelectrocatalytic performance toward water purification

Photoelectrocatalysis (PEC) oxidation is an efficient and eco-friendly advanced oxidation process (AOP), which is a hot research topic in the treatment of organic wastewater. The selection of superior photoelectrode materials is the critical factor affecting PEC efficiency and the main challenge in practical application. In this work, novel NiMoO₄@Co₃O₄ hierarchical core-shell heterogeneous photoanodes were prepared through a two-step hydrothermal method and exhibited superior catalytic performance in the degradation of reactive brilliant blue KN-R. The wrapping of NiMoO₄ nanosheets on Co₃O₄ nanowires electrode can enlarge its contact area with electrolyte, enable fast redox reaction and improve the long-term durability. The unique Z-scheme heterojunction structure between the two components ensured the effective separation of photo-generated carriers, facilitating the generation of OH and O^2- during the PEC degradation process. The optimal NiMoO₄@Co₃O₄-1.25 hierarchical architecture anode catalyst exhibited the highest removal rate of 83.65% of reactive brilliant blue KN-R in 120 min with long-term stability (∼12000 s) in 1.0 mol·L^-1 H₂SO₄ solution. This report may inspire the design and fabrication of heterostructure photoanode in water purification.

Synthesis of poly (N-isopropyl acrylamide-co-2-acrylamido methylpropane sulfonic acid) hydrogel containing copper and nickel nanoparticles with easy recycling and efficient catalytic potential

Poly(N-isopropyl acrylamide-co-2-acrylamido methyl propane sulfonic acid) hydrogel was prepared and used as matrix for the fabrication of nickel and copper nanoparticles. Nickel and copper nanoparticles were fabricated via in situ reduction of Ni (II) and Cu (II) ions within the hydrogel matrix. The manufactured hydrogel and its corresponding composites with Ni and Cu nanoparticles were characterized by FTIR, XRD, EDX, TEM, and TGA. Thermal stability of hydrogel was found to be increased upon fabricating with metal nanoparticles. The hydrogel showed ability to absorb water 63 times of its weight in dried form. The Ni and Cu nanoparticles were observed to be well dispersed, spherical in shape and most of them were having diameters in the range of 12.5 to 38.8 nm and 58 to 102 nm, respectively. The as-prepared hydrogel-nickel and hydrogel-Cu nanocomposite were used as catalysts for the reduction of a toxic pollutant 4-nitrophenol. At 25 °C, the reduction of 4-NP was found to proceed with apparent rate constant (k app) of 0.107 and 0.122 min−1 in the presence of composite containing Ni and Cu nanoparticles, respectively. However, k app was increased with corresponding increase in temperature and its maximum value was found to be 0.815 min−1 at 88 °C with catalyst containing Ni nanoparticles. The formation of well dispersed Ni and Cu nanoparticles in the prepared hydrogel reflected that this hydrogel system can act as efficient stabilizing agent along with acting as a reactor medium. Recycling potential of catalysts was studied for five successive cycles.

Hierarchical S-Scheme Heterostructure of CdIn2S4@UiO-66-NH2 toward Synchronously Boosting Photocatalytic Removal of Cr(VI) and Tetracycline

Developing highly efficient photocatalysts toward synchronously removing heavy metals and organic pollutants is still a serious challenge. Herein, we depict hierarchical S-scheme heterostructured photocatalysts prepared via in situ anchoring UiO-66-NH₂ nanoparticles onto the CdIn₂S₄ porous microsphere structures assembled with numerous nanosheets. In the mixed system of Cr(VI) and tetracycline (TC), the optimal photocatalyst (CIS@U66N-30) shows remarkable photocatalytic activities toward the synchronous removal of Cr(VI) (97.26%) and TC (close to 100% of) under visible-light irradiation for 60 min, being the best removal rates among those of the reported photocatalysts, and sustains the outstanding stability and reusability. Its reaction rate constants of Cr(VI) reduction and TC degradation are about 2.06 and 1.58 folds that in the single Cr(VI) and TC systems, respectively. The enhanced photocatalytic activities of CIS@U66N-30 mainly result from the following synergism: (1) its hierarchical structure offers abundant active sites, and the S-scheme migration mechanism of charge carriers in the heterostructure accelerates the separation and migration of the useful photoinduced electrons and holes with the high redox capability; (2) Cr(VI) and TC can serve as the electron scavenger for TC oxidation degradation and the hole and ^•OH scavenger for Cr(VI) reduction, respectively, further enhancing the separation and utilization efficiency of photoinduced electrons and holes. Besides, the possible TC degradation pathway and plausible S-scheme photocatalytic mechanism over CIS@U66N-30 for the concurrent elimination of Cr(VI) and TC are proposed.

Vasconcellos M, Pedicini R, Ribeiro J. Evaluation of Photoelectrocatalysis with Electrode Based on Ti/RuO2-TiO2 Modified with Tin and Tantalum Oxides for the Degradation of Indigo Blue Dye

Indigo Blue (IB) is a dye widely used by the textile sector for dyeing cellulose cotton fibers and jeans, being considered a recalcitrant substance, and therefore resistant to traditional treatments. Several methodologies are reported in the literature for the removal or degradation of dyes from the aqueous medium, among which photoelectrocatalysis stands out, which presents promising results in the degradation of dyes when a dimensionally stable anode (DSA) is used as a photoanode. In the present work, we sought to investigate the efficiency of a Ti/RuO2-TiO2 DSA modified with tin and tantalum for the degradation of Indigo Blue dye by photoelectrocatalysis. For this, electrodes were prepared by the thermal decomposition method and then a physical-chemical and electrochemical analysis of the material was carried out. The composition Ti/RuO2-TiO2-SnO2Ta2O5 (30:40:10:20) was compared to Ti/RuO2-TiO2 (30:70) in the photocatalysis, electrocatalysis, and photoelectrocatalysis tests. The photocatalysis was able to degrade only 63% of the IB at a concentration of 100 mg L-1 in 3 h, whereas the electrocatalysis and photoelectrocatalysis were able to degrade 100% of the IB at the same initial concentration in 65 and 60 min, respectively.

Optimized titania nanotubes photoanode mediated photoelectrochemical oxidation of ammonia in highly chlorinated wastewater via Cl-based radicals

Efficient removal of low-concentration ammonia from chlorinated wastewater is a challenge for decentralized wastewater treatment due to its notorious environmental effect and lethal influence on aquaculture. Photoelectrocatalytic (PEC) oxidation process is considered as an efficient and environment-friendly approach, whereas a low-cost and stable photoanode is crucial. In this study, TiO₂ nanotubes (TNTs) photoanode (Ar-TNT-500 °C) with excellent physicochemical and photoelectrochemical properties was prepared by optimizing the parameters of anodization, including the voltage/times of anodization and the atmosphere/temperature of heat treatment. During the synthesis, the electrochemical and heat treatment processes promoted the formation of oxygen vacancies (O_V) on the TNTs surface and enhanced its electrocatalytic activity. The optimized Ar-TNT-500 °C photoanode could selectively convert ammonia to N₂ (86%) and a small amount of nitrate (14%). Radical quenching and probe experiments confirmed that the ClO produced by rapid quenching of OH and Cl by free chlorine dominated the selective degradation of ammonia in the synergistic process of photocatalysis and electrocatalysis. The cycle of chlorine-based radicals (ClO and Cl) and Cl^- provided a continuous and efficient ammonia oxidation system, because chlorine-based radicals could efficiently and selectively oxidize ammonia and reduce the production of toxic (per) chlorate.

The state-of-the-art development of photocatalysts for the degradation of persistent herbicides in wastewater

Herbicides are one of the most recurring pollutants in the aquatic system due to their widespread usage in the agriculture sector for weed control. Semiconductor-based photocatalysts have gained recognition due to their ability to degrade and mineralize pollutants into harmless by-products completely. Lately, many studies have been done to design photocatalysts with efficient separation of photogenerated charge carriers and enhanced light absorption. Photocatalyst engineering through doping with metal and non-metal elements and the formation of heterojunction are proven effective for minimizing the recombination of electron-hole pairs and enlarging the absorption in the visible light region. This review focuses on discussing and evaluating the recent progress in the types of photocatalysts and their performance in the remediation of herbicides in wastewater. The development of innovative hybrid technologies is also highlighted. The limitations and challenges of photocatalysis technology in the present literature have been identified, and future studies are recommended.

A portable solar light-driven biophotoelectrocatalytic system for pollutant removal powered by photovoltaic cells

Photoelectrocatalytic (PEC) technology has been considered as one of the most efficient advanced oxidation processes for wastewater treatment, but the necessity of external electric power supply limits the portability of PEC system for on-field applications. Herein, a portable solar-powered biophotoelectrocatalytic system driven by photovoltaic (PV) cells was explored for degradation of pollutant by coupling BiVO₄/Fe₂O₃-deposited photoanode and horseradish peroxidase (HRP)-immobilized cathode. The integration of PV cells in this PEC device could not only avoid the necessary introduction of external electric power supply, but also improve the utilization of solar irradiation. The characterization of BiVO₄/Fe₂O₃ photoanode demonstrates that ultrathin Fe₂O₃ layer on BiVO₄ electrode could facilitate the holes transfer to the surface efficiently and thus avoid charge recombination. After HRP was immobilized on the cathode, the removal efficiency for 2,4-dichlorophenol (2,4-DCP) was obviously promoted, attributed to the efficient HRP-catalyzed oxidation reaction by in-situ generated H₂O₂ from PEC process. Under natural solar irradiation, the proposed portable biophotoelectrocatalytic device exhibited a satisfying removal efficiency of 92.0% for 100 ppm of 2,4-DCP after 3-h treatment. The intermediate products formed during the degradation process were identified by liquid chromatography-mass spectrometry, and possible 2,4-DCP degradation pathway was also proposed.

Thin Films (FTO/BaTiO3/AgNPs) for Enhanced Piezo-Photocatalytic Degradation of Methylene Blue and Ciprofloxacin in Wastewater

In this study, we investigate the ability of barium titanate/silver nanoparticles (BaTiO₃/AgNPs) composites deposited on a fluorine-doped tin oxide (FTO) glass using tape-casting method to produce piezoelectric thin film (FTO/BaTiO₃/AgNPs) for piezocatalytic, photocatalytic, and piezo-photocatalytic degradation of methylene blue (MB) and ciprofloxacin (CIP) in wastewater. The prepared piezoelectric materials (BaTiO₃ and BaTiO₃/AgNPs) were characterized using XRD, SEM, TEM, EDS, UV-DRS, TGA, PL, BET, EIS, and chronoamperometry. The UV-DRS showed the surface plasmon resonance (SPR) of Ag nanoparticles on the surface of BaTiO₃ at a wavelength of 505 nm. The TEM images revealed the average Ag nanoparticle size deposited on the surface of BaTiO₃ to be in the range of 10-15 nm. The chronoamperometry showed that the photoreduction of silver nanoparticles (AgNPs) onto BaTiO₃ (BTO) resulted in a piezo-electrochemical current enhancement from 0.24 to 0.38 mA. The composites (FTO/BaTiO₃/AgNPs) achieved a higher degradation of MB and CIP when the photocatalysis and piezocatalysis processes were merged. Under both ultrasonic vibration and UV light exposure, FTO/BTO/AgNPs degraded about 72 and 98% of CIP and MB from wastewater, respectively. These piezoelectric thin films were shown to be efficient and reusable even after five cycles, suggesting that they are highly stable. Furthermore, the reactive oxygen species studies demonstrated that hydroxyl radicals (·OH) were the most effective species during degradation of MB, with minor superoxide radicals (·O₂ ^-) and holes (h⁺). From this study, we were able to show that these materials can be used as multifunctional materials as they were able to degrade both the dye and pharmaceutical pollutants. Moreover, they were more efficient through the piezo-photocatalytic process.

Variation of current density with time as a novel method for efficient electrochemical treatment of real dyeing wastewater with energy savings

Electro-oxidation is a promising technology for wastewater treatment with biorefractory organic and nitrogen pollutants; however, the high energy demand hinders its wide application. In this study, a novel method by regulating significant parameter during the electro-oxidation process in a timely manner for real dyeing wastewater treatment with energy savings was studied. Operating factors (i.e., flow rate, initial pH value, electrode distance, and current density) were investigated for chemical oxygen demand (COD) and ammonia removal, and the results indicated that current density was the key factor that obviously influenced the electrochemical performance. Indirect oxidation by active chlorine was then confirmed as the main reaction pathway for pollutant oxidation, and the relationship between the current density and the generation of active chlorine was established, suggesting that a large part of the generated active chlorine was not utilized effectively. Subsequently, a novel method of varying the current density in a timely manner based on the reaction mechanism was proposed; the results indicated that, with similar pollutant removal efficiencies, energy consumption could be reduced from 31.6 to 20.5 kWh/m3. Additionally, the novel system was further optimized by Box-Behnken design: The COD removal efficiency could reach 71.8%, and the energy demand could be reduced by 45.6%.

Fabrication of Ru-CoFe2O4/RGO hierarchical nanostructures for high-performance photoelectrodes to reduce hazards Cr(VI) into Cr(III) coupled with anodic oxidation of phenols

Dual-functional photo (electro)catalysis (PEC) is a key strategy for removing coexisting heavy metals and phenolic compounds from wastewater treatment systems. To design a PEC cell, it is crucial to use chemically stable and cost-effective bifunctional photocatalysts. The present study shows that ruthenium metallic nanoparticles decorated with CoFe₂O₄/RGO (Ru-CoFe₂O₄/RGO) are effective bifunctional photoelectrodes for the reduction of Cr(VI) ions. Ru-CoFe₂O₄/RGO achieves a maximum Cr(VI) reduction rate of 99% at 30 min under visible light irradiation, which is much higher than previously reported catalysts. Moreover, PEC Cr(VI) reduction rate is also tuned by adding varying concentration of phenol. A mechanism for the concurrent removal of Cr(VI) and phenol has been revealed over a bifunctional Ru-CoFe₂O₄/RGO catalyst. A number of key conclusions emerged from this study, demonstrating the dual role of phenol during Cr(VI) reduction by PEC. Anodic oxidation of phenol produces the enormous H⁺ ion, which appears to be a key component of Cr(VI) reduction. Additionally, phenolic molecules serve as hole (h⁺) scavengers that reduce e^-/h⁺ recombination, thus enhancing the reduction rate of Cr(VI). Therefore, the Ru-CoFe₂O₄/RGO photoelectrode exhibits a promising capability of reducing both heavy metals and phenolic compounds simultaneously in wastewater.

Pharmaceuticals and personal care products in water streams: Occurrence, detection, and removal by electrochemical advanced oxidation processes

Pharmaceutical and personal care products (PPCPs) are part of the emerging contaminants (ECs) in the environment due to their known or suspected adverse effects in aquatic and terrestrial organisms, as well as in human health. Presence of PPCPs in aquatic and terrestrial ecosystems has been mainly attributed to the effluents of wastewater treatment plants (WWTPs). Although several PPCPs have been detected in wastewater, their removal from wastewater via biological processes is limited. Removal of PPCPs depends on their chemical structure, concentration, solubility, and technology used to treat the wastewater. Electrochemical Advanced Oxidation Processes (EAOPs) are some of the most sought-after methods for dealing with organic pollutants in water including PPCPs, due to generation of strong oxidants such as •OH, H₂O₂ and O₃^- by using directly or indirectly electrochemical technology. This review is focused on the removal of main PPCPs via EAOPs such as, anodic oxidation, electro-Fenton, photoelectron-Fenton, solar photoelectron-Fenton, photoelectrocatalysis and sonoelectrochemical processes. Although more than 40 PPCPs have been identified through different analytical approaches, antibiotics, anti-inflammatory and antifungal are the main categories of PPCPs detected in different water matrices. Application of EAOPs has been centered in the removal of antibiotics and analgesics of high consumption by using model media, e.g. Na₂SO_4. Photoelectrocatalysis and Electro-Fenton processes have been the most versatile EAOPs applied for PPCPs removal under a wide range of operating conditions and a variety of electrodes. Although EAOPs have gained significant scientific interest due to their effectiveness, low environmental impact, and simplicity, further research about the removal of PPCPs and their by-products under realistic concentrations and media is needed. Moreover, mid-, and long-term experiments that evaluate EAOPs performance will provide knowledge about key parameters that allow these technologies to be scaled and reduce the potential risk of PPCPs in aquatic and terrestrial ecosystem.

Recent advances on inactivation of waterborne pathogenic microorganisms by (photo) electrochemical oxidation processes: Design and application strategies

Compared with other conventional water disinfection processes, (photo) electrochemical oxidation (P/ECO) processes have the characteristics of environmental friendliness, convenient installation and operation, easy control and high efficiency of inactivating waterborne pathogenic microorganisms (PMs), so that more and more research work has been focused on this topic, but there is still a huge gap between the research and practical application. Here, the research network of inactivating PMs by P/ECO processes has been comprehensively summarized, and the electrode/reactor/process design strategies based on strengthening direct and indirect oxidation, enhancing mass transfer efficiency and electron transfer efficiency, and improving the effective dose of electrogenerated oxidants are discussed. Furthermore, the factors affecting the inactivation of PMs and the issues regarding to stability and lifetime of the electrode are discussed respectively. Finally, the important research priorities and possible research challenges of P/ECO processes are put forward to make significant progress of this technology.

Photoelectrocatalytic inactivation mechanism of E. coli DH5α (TET) and synergistic degradation of corresponding antibiotics in water

The occurrence and proliferation of antibiotic-resistance genes (ARGs) / antibiotic-resistant bacteria (ARB) have been currently aggravating due to the increase of antibiotic residues in the aquatic environment. The interaction of ARB/ARGs with antibiotics inevitably occurred during water purification, yet their synergistic purification mechanism remains unclear. Herein, a systematic approach was developed to understand, in-depth, the synergistic mechanism in the coexisted E. coli DH5α (TET) inactivation and tetracycline hydrochloride (TET) degradation using photoelectrocatalysis (PEC) as a model technology. Results showed that low dosage (0 - 40 ppm) of TET exerted a negative influence on ARB inactivation with prolonged bactericidal time from 60 to 160 min. Addition of TET in environmental concentration (5 - 60 ppm) resulted in sub-lethal damage and prolonged PEC treatment time (100 - 160 min), accounting for inhibition effects on ARB inactivation. The major reactive species (RSs) involved in ARB inactivation and TET degradation were evidenced as photogenerated hole, ^•OH and O₂^•-, whereas hole and O₂^•- were demonstrated to be the major disinfectants for ARB/ARG inactivation. The bacterial defense system displayed increased antioxidative activities of superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) to protect ARB cells against oxidative stress. Exposure to 60 ppm TET was a threshold where certain ARB cells were induced into viable but nonculturable bacterial cell (VBNC) state, as evidenced by plate counting and ATP activity analysis, together with the integral cell membranes observed by flow cytometry (FCM) and scanning electron microscope (SEM). These findings appeal for appropriate technical adjustments for water and wastewater treatment to ensure safety of water.

Simultaneous removal of heavy metals and dyes in water using a MgO-coated Fe3O4 nanocomposite: Role of micro-mixing effect induced by bubble generation

This study focused on the development of a nano-adsorbent for contaminant removal without the use of any external energy. An eco-friendly Fe₃O₄@MgO core-shell nanocomposite was synthesized and tested for the removal of a heavy metal, lead (Pb²⁺) and a dye, rhodamine B (RhB). The addition of H₂O₂ into the system enabled the self-mixing of the aqueous solution containing Fe₃O₄@MgO through the generation of bubbles. This system showed an excellent removal efficiency of 99% in just 15 min for Pb²⁺ and 120 min for RhB, which is far better than the control experiment (without H₂O₂). The cation exchange mechanism dominated in the removal of heavy metals, while the adsorptive removal of dye proceeded through the H-bonding between Mg(OH)₂ and dye molecules. The removal efficiency increased exponentially with the increase of H₂O₂ at the optimal concentration of 5% and it was effective over a wide pH range. Moreover, the performance of the Fe₃O₄@MgO-H₂O₂ system was verified for other heavy metals such as Cd, Ni, Zn, Co, and Cu, demonstrating that the Fe₃O₄@MgO-H₂O₂ system can be widely implemented in the treatment of real water matrices contaminated with heavy metals and organic dyes.

Bioaccumulation and health risk assessment of exposure to potentially toxic elements by consuming agricultural products irrigated with wastewater effluents

Potentially toxic elements (PTEs) have many adverse health effects due to bioaccumulation capability and their long persistence in the environment. As a renewable water source, the effluents of municipal wastewater treatment systems have been used to irrigate agricultural products widely. However, the evidence on the bioaccumulation of PTEs in crops irrigated with these effluents is still scarce, with no available study in low and middle-income countries. Therefore, this study aimed to assess the PTEs concentration in the soil and crops irrigated with effluents of Sabzevar wastewater treatment plant and the related health risk by that. The clustered method was used to determine the soil and craps samples. Seventy cumulative samples were randomly prepared in summer and autumn 2016 and 2017 from crops, soil and effluent. Inductively coupled plasma mass spectrometry (ICP-MS) was used to measure PTEs. The health risk of exposure to PTEs was assessed using Monte Carlo simulation technique. Kruskal Wallis test and Posthoc Tukey HSD test were used to assess the mean difference of PTEs between soil, effluent and crops as well as between crops together. The bioaccumulation factor (BAF) magnitude order in different crop samples was Cd > Sr > Cu > Pb > Zn > Co > As > Cr > Ni, respectively. The Cd accumulation in Sugar beet plant was significantly higher than in other samples. The highest hazard quotient (HQ) based on single PTEs was observed for As (mineral) (mean: 5.62 × 10^-1 and percentile 95th: 2.13) in Okra. Regarding total HQ (THQ), the highest and lowest mean (percentile 95th) values were 1.50 (3.22) and 2.40 × 10^-1 (4.01 × 10^-1) for Okra and Watermelon, respectively. The mean concentrations of Co, Cr, Ni and Zn were significantly higher in crops compared to soil and influent samples. Posthoc tests indicated that the concentration of PTEs between investigated crop samples were not statistically significant different (p > 0.05). Overall, our study suggested that irrigation with the effluent of stabilization pond wastewater treatment system exerts a potential health risk due to bioaccumulation of PTEs in crops.

Improving Wastewater Treatment by Triboelectric-Photo/Electric Coupling Effect

The ability to meet higher effluent quality requirements and the reduction of energy consumption are the biggest challenges in wastewater treatment worldwide. A large proportion of the energy generated during wastewater treatment processes is neglected and lost in traditional wastewater treatment plants. As a type of energy harvesting system, triboelectric nanogenerators (TENGs) can extensively harvest the microscale energies generated from wastewater treatment procedures and auxiliary devices. This harvested energy can be utilized to improve the removal efficiency of pollutants through photo/electric catalysis, which has considerable potential application value in wastewater treatment plants. This paper gives an overall review of the generated potential energies (e.g., water wave energy, wind energy, and acoustic energy) that can be harvested at various stages of the wastewater treatment process and introduces the application of TENG devices for the collection of these neglected energies during wastewater treatment. Furthermore, the mechanisms and catalytic performances of TENGs coupled with photo/electric catalysis (e.g., electrocatalysis, photoelectric catalysis) are discussed to realize higher pollutant removal efficiencies and lower energy consumption. Then, a thorough, detailed investigation of TENG devices, electrode materials, and their coupled applications is summarized. Finally, the intimate coupling of self-powered photoelectric catalysis and biodegradation is proposed to further improve removal efficiencies in wastewater treatment. This concept is conducive to improving knowledge about the underlying mechanisms and extending applications of TENGs in wastewater treatment to better solve the problems of energy demand in the future.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Pollutant degradation with mediator Z-scheme heterojunction photocatalyst in water: A review

The Z-scheme heterojunction is a photocatalyst with narrow band gap and sufficiently high oxidization and reduction powers for degradation of pollutants in waters. This review firstly summarizes the fundamentals of photocatalysis, and explains the need to develop Z-scheme heterojunctions to harvest energy from sunlight effectively. Secondly, contemporary reports of degradation wastewater pollutants, including organic dyes, antibiotics, and other chemicals are reviewed and discussed. A challenge in the selection of an appropriate Z-scheme for removing a specific pollutant is the lack of available energy levels that are offered by the catalyst and the lack of redox energy levels that are required to break down essential chemical bonds of the pollutants. With reference to the redox energy levels offered by the active photocatalytic species, the redox energy levels of specific pollutants studied in literature are estimated. Challenges and prospects concerning the use of the Z-scheme to degrade recalcitrant pollutants under irradiation by sunlight are outlined at the end of this review.

Visible light-driven photoelectrocatalysis for simultaneous removal of oxytetracycline and Cu (II) based on plasmonic Bi/Bi2O3/TiO2 nanotubes

A visible light-driven photoelectrocatalytic system was constructed based on Bi/Bi₂O₃/TiO₂ nanotubes (NTs) to treat wastewater containing oxytetracycline and Cu²⁺ mixed pollutants. The surface morphology, crystal phase, elemental composition, light absorption property and photoelectrochemical activity of the synthesized Bi/Bi₂O₃/TiO₂ NTs were investigated. The composite film, Bi/Bi₂O₃/TiO₂ NTs was used for the photoelectrochemical removal of oxytetracycline, and it had excellent visible light photoelectrocatalytic performance. Under optimal conditions, the composite film was simultaneously used to remove coexisting oxytetracycline-Cu²⁺. The study results show that the reduction of Cu²⁺ on cathode was promoted by oxytetracycline while the degradation of oxytetracycline on photoanode was slightly suppressed by Cu²⁺. Also, possible photoelectrocatalytic degradation pathways for oxytetracycline-Cu²⁺ were analyzed by HPLC-MS.

RSM-Based Preparation and Photoelectrocatalytic Performance Study of RGO/TiO2 NTs Photoelectrode

In this paper, reduced graphene oxide (RGO) was prepared by a modified Hummers method and chemical reduction method, and an RGO/TiO2 NTs (RGO/TiO2 nanotubes) photoelectrode was prepared by the electrochemical deposition method. The as-prepared RGO/TiO2 NTs were analyzed by scanning electron microscopy (SEM) and X-ray diffraction (XRD), and their photocatalytic activities were investigated by measuring the degradation of methylene blue (MB) under simulated solar light irradiation. The SEM and XRD results indicated that the original tubular structure of TiO2-NTs was not changed after RGO modification. The surface of the TiO2 NTs photoelectrode was covered with a non-uniform, flake-shaped reduced graphene oxide film. The thickness of the RGO/TiO2 NTs was increased to about 22.60 nm. The impedance of the RGO/TiO2 NTs was smaller than that of the TiO2 NT photoelectrode. The optimal preparation conditions of RGO/TiO2 NT photoelectrodes were investigated by using a single factor method and response surface method. The best preparation conditions were as follows: deposition potential at 1.19 V, deposition time of 10.27 min, and deposition temperature at 24.94 °C.

Novel green chitosan-pectin gel beads for the removal of Cu(II), Cd(II), Hg(II) and Pb(II) from aqueous solution

Chitosan-pectin gel beads (CPBs) were synthesized via a facile and green method and applied to remove heavy metals from aqueous solution. The structural characteristics of CPBs were investigated by SEM and FTIR, the mechanical strength of CPBs was measured by Texture Analyzer and the stability of CPBs was evaluated in acidic solution. To study the adsorption characteristics, the effect of pH, contact time, initial heavy metals concentration, temperature, adsorption mechanism and regeneration were systematically investigated. The adsorption kinetics fitted well pseudo-second-order model, and the adsorption isotherms were well described by Langmuir model. The maximum adsorption capacities of Cu(II), Cd(II), Hg(II) and Pb(II) were 169.4, 177.6, 208.5 and 266.5 mg/g, respectively. The adsorption-desorption experiments revealed that the CPBs exhibited a great reusability. Thus, the synthesized CPBs in this study had the potential to be utilized as an environment-friendly and green adsorbent for the removal of heavy metals.

Nanomaterials in Photo (Electro) Catalysis

The increasing rate of water and air pollution dramatically impacts natural ecosystems and human health causing depletion of biodiversity, climate changes, spreading of respiratory diseases, and, as a consequence, negatively impacting the world economy [...]