In-situ development of metal organic frameworks assisted ZnMgAl layered triple hydroxide 2D/2D hybrid as an efficient photocatalyst for organic dye degradation

Support based metal incorporated layered nanomaterials for photocatalytic degradation of organic pollutants

An effective approach to producing sophisticated miniaturized and nanoscale materials involves arranging nanomaterials into layered hierarchical frameworks. Nanostructured layered materials are constructed to possess isolated propagation assets, massive surface areas, and envisioned amenities, making them suitable for a variety of established and novel applications. The utilization of various techniques to create nanostructures adorned with metal nanoparticles provides a secure alternative or reinforcement for the existing physicochemical methods. Supported metal nanoparticles are preferred due to their ease of recovery and usage. Researchers have extensively studied the catalytic properties of noble metal nanoparticles using various selective oxidation and hydrogenation procedures. Despite the numerous advantages of metal-based nanoparticles (NPs), their catalytic potential remains incompletely explored. This article examines metal-based nanomaterials that are supported by layers, and provides an analysis of their manufacturing, procedures, and synthesis. This study incorporates both 2D and 3D layered nanomaterials because of their distinctive layered architectures. This review focuses on the most common metal-supported nanocomposites and methodologies used for photocatalytic degradation of organic dyes employing layered nanomaterials. The comprehensive examination of biological and ecological cleaning and treatment techniques discussed in this article has paved the way for the exploration of cutting-edge technologies that can contribute to the establishment of a sustainable future.

Development of Bi2S3/Cu2S hetrojuction as an effective photocatalysts for the efficient degradation of antibiotic drug and organic dye

Herein, a Bi2S3/Cu2S was successfully synthesized via a simple one-step wet impregnation process. The compositional behavior and electrical and optical properties of photocatalysts were investigated in detail. Photocatalytic technology has shown great promise in wastewater treatment, splitting water to hydrogen, and converting CO2 to fuel. Researchers or scientist are attempting to design sulfate-based heterojunction photocatalytic systems in order to develop novel photocatalysts with excellent performance. Photodegradation of methylene blue (MB) dye and tetracycline (TC) drug under visible light irradiation was used to assess the photocatalytic activity of as-prepared samples. As a result, 2:1% wt of Bi2S3/Cu2S heterostructure composite revealed superior visible light degradation performing of MB dye, and TC drug efficiency as 90.2% and 87.5%, respectively. The prepared hybrid photocatalyst has demonstated a potential for use in the photocatalytic degradation of antibiotic durgs and dyes, indicating a promissing future for its application.

Photocatalytic degradation of organic pollutants and inactivation of pathogens under visible light via SnO2/rGO composites

The domains of environmental cleanup and pathogen inactivation are particularly interesting in nanocomposites (NCs) due to their exceptional physicochemical properties. Tin oxide/reduced graphene oxide nanocomposites (SnO₂/rGO NCs) have potential uses in the biological and environmental fields, but little is known about them. This study aimed to investigate the photocatalytic activity and antibacterial efficiency of the nanocomposites. The co-precipitation technique was used to prepare all the samples. XRD, SEM, EDS, TEM, and XPS analyses were employed to characterize the physicochemical properties of SnO₂/rGO NCs for structural analysis. The rGO loading sample resulted in a decrease in the crystallite size of SnO₂ nanoparticles. TEM and SEM images demonstrate the firm adherence of SnO₂ nanoparticles to the rGO sheets. The chemical state and elemental composition of the nanocomposites were validated by the XPS and EDS data. Additionally, the visible-light active photocatalytic and antibacterial capabilities of the synthesized nanocomposites were assessed for the degradation of Orange II and methylene blue, as well as the suppression of the growth of S. aureus and E. coli. As a result, the synthesized SnO₂/rGO NCs are improved photocatalysts and antibacterial agents, expanding their potential in the fields of environmental remediation and water disinfection.

Low-temperature synthesis, characterization and photocatalytic properties of lanthanum vanadate LaVO4

In this study, we have successfully prepared tetragonal lanthanum vanadate LaVO₄ nanoparticles by a facile co-precipitation method at room temperature. The obtained materials were characterized using different structural and micro-structural techniques such as the characterization by X-ray diffraction (XRD), UV-Vis diffuse reflectance spectrum (DRS), transmission electron microscopy (TEM), and Raman spectrometry. The obtained structure is crystallized in single tetragonal phase with pin-like nanostructure. A main optical transition with bandgap energy of 3.26 eV is evidenced, and the average lifetime of charges carriers was found to be 1 ns Furthermore, the photoluminescence occurs in the visible light range. The photocatalytic activity was evaluated by the photocatalytic degradation of methylene blue (MB) with initial concentration of 10 mg L^-1. The result indicates that LaVO₄ particles showed a best photocatalytic activity of 98.2% degradation for methylene blue solution after irradiation of 90 min under visible light. Furthermore, the photocatalytic mechanism and reusability were studied.

Box-Behnken modeling and optimization of visible-light photocatalytic removal of methylene blue by ZnO-BiFeO3 composite

Box-Behnken experimental design was utilized to model and optimize the photocatalytic removal of methylene blue (MB) using ZnO-BiFeO₃ composite under visible light (LED). Three catalysts with different ZnO:BiFeO₃ molar ratios (2:1, 1:2, and 1:1) were synthesized successfully using the hydrothermal method. The structural, morphological, and optical properties of the synthesized photocatalysts were analyzed by X-ray diffraction (XRD), Field Emission Scanning Electron Microscope (FESEM), Energy Dispersive X-ray Spectroscopy (EDX), Fourier Transform Infrared Spectra (FT-IR), Ultraviolet Visible Spectrometer (UV-vis), Transmission Electron Microscopy(TEM), High-Resolution Transmission Electron Microscopy (HR-TEM), and Photoluminescence (PL) Spectrophotometry. FESEM showed the relatively uniform distribution of BiFeO₃ crystalline particles on ZnO ones. UV-vis analysis showed that the photocatalytic performance of pure ZnO and BiFeO₃ under visible light irradiation is weak, while ZnO-BiFeO₃ with a 2:1 molar ratio composite with a bandgap of about 2.37 eV showed high performance. This improved photocatalytic activity may be due to the heterogeneous synergistic effect of the p-n junction. In order to optimize the experimental conditions, four factors of initial MB concentration (5 to 20 mg/L), pH (3 to 12), catalyst dosage (0.5 to 1.25 mg/L), and light intensity (4 to 18 W) were selected as independent input variables. Box-Behnken experimental design method (BBD) suggested a quadratic polynomial equation to fit the experimental data. The results of the analysis of variance (ANOVA) confirmed the goodness of fit for the suggested model (predicted- and adjusted-R² 0.99). The optimum conditions for maximizing the photocatalytic MB degradation were found to be an initial MB concentration of 11 mg/L, pH of 11.7, catalyst dosage of 0.716 mg/L, and light intensity of 11.4 W. Under the optimum conditions, the highest photocatalytic MB degradation of 62.9% was obtained, which is in reasonable agreement with the predicted value of 69%.

High-efficient and rapid removal of anionic and cationic dyes using a facile synthesized sole adsorbent NiAlFe-layered triple hydroxide (LTH)

It would be extremely momentous to familiarize a low-cost sole adsorbent NiAlFe-layered triple hydroxides (LTHs) having a strong sorption affinity towards both anionic and cationic dyes. Using the urea hydrolysis hydrothermal method LTHs were fabricated and by altering the ratio of participant metal cations the adsorbent was optimized. BET analysis revealed that the optimized LTHs possess an elevated surface area (160.04 m²/g) while TEM and FESEM analysis portrayed the stacked sheets-like 2D morphology. LTHs were employed for the amputation of anionic congo red (CR) and cationic brilliant green (BG) dye. The adsorption study showed that within 20 and 60 min, respectively, maximum adsorption capacities were achieved at 57.47 mg/g and 192.30 mg/g for CR and BG dye. Adsorption isotherm, kinetics, and thermodynamics study revealed that both chemisorptions with physisorptions were the assertive factor for the dye encapsulation. This enhanced adsorption performance of the optimized LTH for the anionic dye is attributed to its inherent anions exchange properties and new bond formation with the adsorbent skeleton. Whereas for the cationic dye, it was because of the formation of strong hydrogen bonds, and electrostatic interaction. Morphological manipulation of LTHs, formulates the optimized adsorbent LTH111, provokes the adsorbent for this elevated adsorption performance. Overall, this study revealed that LTHs have a high potential for the effectual remediation of dyes from wastewater as a sole adsorbent at a low cost.

In-situ development of boron doped g-C3N4 supported SBA-15 nanocomposites for photocatalytic degradation of tetracycline

In this study, versatile boron-doped graphitic carbon nitride (gCN) incorporated mesoporous SBA-15 (BGS) composite materials were prepared by thermal polycondensation method using boric acid & melamine as a B-gCN source material and SBA-15 as mesoporous support. The prepared BGS composites are utilized sustainably using solar light as the energy source for the continuous flow of photodegradation of tetracycline (TC) antibiotics. This work highlights that the photocatalysts preparation was carried out with an eco-friendly strategy, solvent-free and without additional reagents. To alter the amount of boron quantity (0.124 g, 0.248 g, and 0.49 g) have to prepare three different composites using a similar procedure, the obtained composites viz., BGS-1, BGS-2 and BGS-3, respectively. The physicochemical property of the prepared composites was investigated by X-ray diffractometry, Fourier-transform infrared spectroscopy, Raman, Diffraction reflectance spectra, Photoluminescence, Brunauer-Emmett-Teller and transmission electron microscopy (TEM). The results shows that 0.24 g boron- loaded BGS composites degrade TC up to 93.74%, which is much higher than the rest of the catalyst. The addition of mesoporous SBA-15 incresed the specific surface area of the g-CN, and heteroatom of boron increased the interplanar stracking distance of g-CN, enlarged the optical absorption range, reducing the energy bandgap and enhanced the photocatalytic activity of TC. Additionally, the stability and recycling efficiency of the representative photocatalysts viz., BGS-2 was observed to be good even at the fifth cycle. The photocatalytic process using the BGS composites demonstrated to be capable candidate for the removal of tetracycline biowaste from aquesous media.

Recent advances and challenges in 2D/2D heterojunction photocatalysts for solar fuels applications

Although photocatalytic technology has emerged as an effective means of alleviating the projected future fuel crisis by converting sunlight directly into chemical energy, no visible-light-driven, low-cost, and highly stable photocatalyst has been developed to date. Due to considerably higher interfacial contact with numerous reactive sites, effective charge transmission and separation ability, and strong redox potentials, the focus has now shifted to 2D/2D heterojunction systems, which have exhibited effective photocatalytic performance. The fundamentals of 2D/2D photocatalysis for different applications and the classification of 2D/2D materials are first explained in this paper, followed by strategies to improve the photocatalytic performance of various 2D/2D heterojunction systems. Following that, current breakthroughs in 2D/2D metal-based and metal-free heterojunction photocatalysts, as well as their applications for H₂ evolution via water splitting, CO₂ reduction, and N₂ fixation, are discussed. Finally, a brief overview of current constraints and predicted results for 2D/2D heterojunction systems is also presented. This paper lays out a strategy for developing efficient 2D/2D heterojunction photocatalysts and sophisticated technology for solar fuel applications in order to address the energy issue.

Effect of silver incorporation on the photocatalytic degradation of Reactive Red 120 using ZnS nanoparticles under UV and solar light irradiation

In this work, the Ag modified ZnS nanoparticles were synthesized via the hydrothermal method, and used for photocatalytic degradation of organic dyes. Various analytical techniques were utilized to characterize the prepared ZnS and Ag incorporated ZnS nanoparticles. The vibrational and structural properties of the prepared nanoparticles were analyzed by FT-IR and XRD, which confirm the modification of Ag in the ZnS. The broadening of the hydroxyl group after incorporation of Ag in ZnS was observed in the FT-IR spectra. The additional (111), (200), and (220) planes in XRD of Ag-ZnS belong to the silver. The increased absorbance in the entire visible region facilitates the ZnS/Ag photocatalytic performance under direct sunlight. ZnS/Ag nanoparticles showed excellent photocatalytic activity toward degradation of RR 120, DB 15, and AB 1. The ZnS/Ag catalyst efficiently degrades the RR 120 under sunlight with higher pseudo-first order kinetic k = 0.0179 min^-1 than the other dyes. The reusability study exhibited ZnS/Ag has highly stable and degraded more than 80% of RR 120 under sunlight irradiation after 4th cycle.

Ni-MOL/In2Se3 heterostructure construction with mixed metal (Ti/Ni) for efficient photocatalytic tetracycline degradation

To investigate the mechanism of bimetallic 2-dimension (2D) catalyst existing in the current photocatalytic degradation process, the tetracycline (TC) degradation performance and mechanism by bimetallic 2D photocatalyst was studied extensively. Nickel metal-organic layer (Ni-MOL) and In₂Se₃, a typical 2D semiconductor photocatalyst, shows great potential for photocatalytic degradation of TC. Herein, an In₂Se₃ assisted Ni-MOL composite bimetallic photocatalyst was assembled, of which could obtain the degradation rate of 96.4% within 90 min for TC under visible light. Ni-MOL was the main active site for TC degradation by photo-induced holes which located at the Ni atom active site during the photocatalytic process. The role of In₂Se₃ and the element of Ti in Ni-MOL was to assist Ni-MOL by providing more photo-induced carriers and inhibiting carrier recombination. This work makes a contribution to the application of 2D bimetallic photocatalytic in TC degradation.

Electrochemically enhanced adsorption of organic dyes from aqueous using a freestanding metal-organic frameworks/cellulose-derived porous monolithic carbon foam

Monolithic carbon foams are promising materials for adsorption due to the easy recyclability and without secondary-pollution. However, poor adsorption efficiency for organic pollutants limits its practical application. Hence, this work proposed a novel monolithic porous carbon foam by a facile carbonization approach as freestanding electrodes to remove the organic dyes. The prepared carbon foam derived from waste cigarette filters and zeolitic-imidazolate frameworks-8 with well-developed pores, and the calculated surface area is 1457 m²·g^-1, and exhibited an outstanding removal efficiency for methylene blue in aqueous. The maximum adsorption capacity for methylene blue can reach up to 1846.7 mg·g^-1 under the applied voltage of -1.2 V. Importantly, as-prepared carbon foams possessed excellent stability, and the removal efficiency can remain above 85% after 5 cycles. Thus, obtained porous carbon foams in this paper as a free standing electrode is expected to be promising materials of adsorbent besides supercapacitors.

2D MOFs-based Materials for the Application of Water Pollutants Removing: Fundamentals and Prospects

Water quality can have serious impacts on human health. One crucial issue of water pollution seriously affects our safety due to the continually emerging of discovered anthropogenic pollutants. The water treatment technologies are persistent improvement to adapt such new contaminants, which accelerates the evolution of materials science to explore solving the problems. Metal-organic Frameworks (MOFs) as the significant porous and multi-dimensional networks has been concerned for toxic pollutant elimination, especially probed the applications of outstanding layered 2D skeletons MOFs-based materials. The emphases of this review highlight the 2D MOFs-based materials used in water remediation and treatment strategies including adsorption and catalysis methods. Further, the prospects and challenges of 2D MOFs-based materials for water treatments applications would be surveyed meticulously for the future research and development.