Complexing characteristics between Cu(Ⅱ) ions and dissolved organic matter in combined sewer overflows: Implications for the removal of heavy metals by enhanced coagulation

Statistically Analyzed Heavy Metal Removal Efficiency of Silica-Coated Cu0.50Mg0.50Fe2O4 Magnetic Adsorbent for Wastewater Treatment

Even low concentrations of pollutants in water, particularly heavy metals, can significantly affect the ecosystem and human health. Adsorption has been determined to be one of the most effective techniques of removing pollution from wastewater among the various strategies. To remove heavy metals such as Zn2+ and Pb2+, we prepared a silica-coated CuMgFe2O4 magnetic adsorbent using sol-gel method and tested it for wastewater treatment. X-ray diffraction investigation validated the creation of cubic spinel structure, while morphological analysis showed that silica coating reduces the particle size but boosts the surface roughness of the nanoparticles and also reduces the agglomeration between particles. UV-visible spectroscopy indicates a rise in bandgap and magnetic characteristics analysis indicates low values of magnetization due to silica coating. The kinetic and isotherm parameters for heavy metal ions adsorption onto silica-coated Cu0.50Mg0.50Fe2O4 nanoparticles are calculated by applying pseudo-first-order, pseudo-second-order, Langmuir and Freundlich models. Adsorption kinetics revealed that the pseudo-second-order and Langmuir models are the best fit to explain adsorption kinetics. Synthesized adsorbent revealed 92% and 97% removal efficiencies for Zn2+ and Pb2+ ions, respectively.

Effect of microplastics on the binding properties of Pb(ii) onto dissolved organic matter: insights from fluorescence spectra and FTIR combined with two-dimensional correlation spectroscopy

Heavy metal cations are a typical type of inorganic pollutant that has persistent distribution characteristics in aquatic environments and are easily adsorbed on carriers, posing serious threats to ecological safety and human health. Some studies have shown that the coexistence of dissolved organic matter (DOM) and microplastics (MPs) promotes the adsorption of heavy metal cations, but the mechanism of promoting the adsorption process has not been thoroughly studied. In this study, the effect of polystyrene microplastics (PSMPs) on the binding properties of Pb2+ onto humic acid (HA) in aquatic environments was investigated by spectral analysis and two-dimensional correlation (2D-COS) analysis. When PSMPs co-existed with HA, the adsorption capacity of Pb2+ increased. On the one hand, Pb2+ is directly adsorbed on HA through the mechanism of complexation reaction, ion exchange and electrostatic interaction. On the other hand, Pb2+ is first adsorbed on PSMPs by electrostatic action and indirectly adsorbed on HA in the form of PSMPs-Pb2+ owing to the interaction between HA and PSMPs, which increases the adsorption amount of Pb2+ on HA. This study is significant for studying the migration and regression of heavy metal cation contaminants when PSMPs co-exist with DOM in an aqueous environment.

Selective recovery of Cu(II) from strongly acidic wastewater by zinc dimethyldithiocarbamate: Affecting factors, efficiency and mechanism

The selective recovery of copper from strongly acidic wastewater containing mixed metal ions remains a significant challenge. In this study, a novel reagent zinc dimethyldithiocarbamate (Zn(DMDC)₂) was developed for the selective removal of Cu(II). The removal efficiency of Cu(II) reached 99.6% after 120 min reaction at 30°C when the mole ratio Zn(DMDC)₂/Cu(II) was 1:1. The mechanism investigation indicates that the Cu(DMDC)₂ products formed as a result of the displacement of Zn(II) from the added Zn(DMDC)₂ by Cu(II) in wastewater, due to the formation of stronger coordination bonds between Cu(II) and the dithiocarbamate groups of Zn(DMDC)₂. Subsequently, we put forward an innovative process of resource recovery for strongly acidic wastewater. Firstly, the selective removal of Cu(II) from actual wastewater using Zn(DMDC)₂, with a removal efficiency of 99.7%. Secondly, high-value CuO was recovered by calcining the Cu(DMDC)₂ at 800°C, with a copper recovery efficiency of 98.3%. Moreover, the residual As(III) and Cd(II) were removed by introducing H₂S gas, and the purified acidic wastewater was used to dissolve ZnO for preparation of valuable ZnSO₄·H₂O. The total economic benefit of resource recovery is estimated to be 11.54 $/m³. Accordingly, this study provides a new route for the resource recovery of the treatment of copper-containing acidic wastewater.

Effect of microbial network complexity and stability on nitrogen and sulfur pollutant removal during sediment remediation in rivers affected by combined sewer overflows

Discovering the complexity and improving the stability of microbial networks in urban rivers affected by combined sewer overflows (CSOs) is essential for restoring the ecological functions of urban rivers, especially to improve their ability to resist CSO impacts. In this study, the effects of sediment remediation on the complexity and stability of microbial networks was investigated. The results revealed that the restored microbial community structure using different approaches in the river sediments differed significantly, and random matrix theory showed that sediment remediation significantly affected microbial networks and topological properties; the average path distance, average clustering coefficient, connectedness, and other network topological properties positively correlated with remediation time and weakened the small-world characteristics of the original microbial networks. Compared with other sediment remediation methods, regulating low dissolved oxygen (DO) shifts the microbial network module hubs from Actinobacteria and Bacteroidetes to Chloroflexi and Proteobacteria. This decreases the positive association of networks by 17%-18%, which intensifies the competitiveness among microorganisms, further weakening the influence and transmission of external pressure across the entire microbial network. Compared with that of the original sediment, the vulnerability of the restored network was reduced by more than 36%, while the compositional stability was improved by more than 12%, with reduced fluctuation in natural connectivity. This microbial network succession substantially increased the number of key enzyme-producing genes involved in nitrogen and sulfur metabolism, enhancing nitrification, denitrification, and assimilatory sulfate reduction, thereby increasing the removal rates of ammonia, nitrate, and acid volatile sulfide by 43.42%, 250.68% and 2.66%, respectively. This study comprehensively analyzed the succession patterns of microbial networks in urban rivers affected by CSOs before and after sediment remediation, which may provide a reference for reducing the impact of CSO pollution on urban rivers in the subsequent stages.

Two recyclable and complementary adsorbents of coal-based and bio-based humic acids: High efficient adsorption and immobilization remediation for Pb(II) contaminated water and soil

Humic acid can effectively bind heavy metals and is a promising remediation agent for heavy metals-contaminated water and soil. Many successful applications of humic acid have been reported, but rarely studied the specific process and mechanism of heavy metal removal by humic acids from water and soil, especially the simultaneous application of coal-based and bio-based humic acids. In this work, two kinds of coal-based and bio-based humic acid materials (CHA and BHA) from weathered coal and rice husk were industrially produced and studied their Pb(II) adsorption and immobilization characteristics and mechanisms in water and soil. The batch adsorption experiments obtained the Pb(II) adsorption by CHA and BHA both were spontaneous and endothermic monolayer chemisorption and controlled by three rate-limiting steps (bulk, film, and pore) in the adsorption process. CHA and BHA had highly efficient Pb(II) adsorption capacities, obtained their maximum adsorption capacity was 201 and 188 mg g^-1, respectively. In addition to the two main adsorption mechanisms of ion exchange and surface complexation, electrostatic interaction, precipitation reaction, and π-π interaction were also involved. Soil culture experiments showed that CHA and BHA both exhibited a highly efficient immobilization effect on Pb(II)-contaminated soil, and CHA and BHA had a better synergistic promotion effect. Compared with the CK soil, the content of DTPA-Pb(II) decreased by 10.2-13.2% and the content of RES-Pb(II) increased by 14-22% in soils treated with different humic acids. Ion exchange, complexation, precipitation, and electrostatic attraction promote the transformation of unstable Pb(II) to stable Pb(II), which was of great significance for the immobilization of Pb(II) in soil. Overall, CHA and BHA have the potential to be used as green, efficient, and promising adsorbents to remove and immobilize Pb(II) from wastewater and soil.

Green multifunctional PVA composite hydrogel-membrane for the efficient purification of emulsified oil wastewater containing Pb2+ ions

To date, most existing engineering materials have difficulty simultaneously separating oil/water and removing heavy metals from complex oily wastewater. In response to this challenge, a novel multifunctional composite hydrogel membrane (named PVA-CS-LDHs) was fabricated by incorporating chitosan (CS) and nanohydrotalcite (LDHs) into a polyvinyl alcohol (PVA) hydrogel. This material was developed using an easy yet versatile strategy of freezing and salting-out, which can enable the formation of a PVA-CS-LDH hydrogel membrane in one step and endow the PVA-CS-LDHs with high strength, excellent stretchability, favourable shape recoverability, and an ideal 3D microstructure. The PVA-CS-LDH membrane can purify emulsified oil and metal ions simultaneously with a separation efficiency of 99.89 % for emulsified oil and a removal efficiency of 97.44 % for Pb2+ ions. Additionally, the high-efficiency, multifunctional, high-antifouling and eco-friendly properties of the PVA-CS-LDH membrane make it a promising hydrogel material for both emulsified oil separation and heavy metal ion removal. Thus, this material provides critical application potential that can address scientific and technological challenges in complex oily wastewater purification.

Characterization of copper binding to biochar-derived dissolved organic matter: Effects of pyrolysis temperature and natural wetland plants

Characterization of the biochar-derived dissolved organic matter (BDOM) is essential to understanding the environmental efficacy of biochar and the behavior of heavy metals. In this study, the binding properties of BDOM derived from different pyrolysis temperatures, wetland plants, and plant organs with Cu was investigated based on a multi-analytical approach. In general, the pyrolysis temperature exhibited a more significant impact on both the spectral characteristics of BDOM and Cu binding behavior than those of the feedstocks. With the pyrolysis temperature increased, the dissolved organic carbon, aromaticity, and fluorescence substance of BDOM decreased and the structure became more condensed. Humic-and tryptophan-like substance was more susceptible to the addition of Cu for BDOM pyrolyzed at 300 ℃ and 500 ℃, respectively. In addition, the more tyrosine-like substance is involved in Cu binding at higher pyrolysis temperature (500 ℃). However, the fluvic-like substance occurred preferentially with Cu than the other fluorophores. Moreover, the higher binding capacity for Cu was exhibited by the humic-like substance and by BDOM derived from the higher pyrolysis temperature and the lower elevation plants with the corresponding average stability constants (log K_M) of 5.58, 5.36, and 5.16.

Continuing progress in the field of two-dimensional correlation spectroscopy (2D-COS): Part III. Versatile applications

In this review, the comprehensive summary of two-dimensional correlation spectroscopy (2D-COS) for the last two years is covered. The remarkable applications of 2D-COS in diverse fields using many types of probes and perturbations for the last two years are highlighted. IR spectroscopy is still the most popular probe in 2D-COS during the last two years. Applications in fluorescence and Raman spectroscopy are also very popularly used. In the external perturbations applied in 2D-COS, variations in concentration, pH, and relative compositions are dramatically increased during the last two years. Temperature is still the most used effect, but it is slightly decreased compared to two years ago. 2D-COS has been applied to diverse systems, such as environments, natural products, polymers, food, proteins and peptides, solutions, mixtures, nano materials, pharmaceuticals, and others. Especially, biological and environmental applications have significantly emerged. This survey review paper shows that 2D-COS is an actively evolving and expanding field.

Amine-bilayer-functionalized cellulose-chitosan composite hydrogel for the efficient uptake of hazardous metal cations and catalysis in polluted water

Herein, we represent a novel ecofriendly bilayer-amine group incorporated microcrystalline cellulose (MCC)/chitosan (CS) hydrogel, fabricated via integrating polydopamine (PDA) and polyethyleneimine (PEI) for reliable and effective extraction of copper (Cu²⁺), zinc (Zn²⁺), and nickel (Ni²⁺) ions from effluents. Owing to abundant adsorptive sites, the MCC-PDA-PEI/CS-PDA-PEI hydrogel showed excellent Cu²⁺, Zn²⁺, and Ni²⁺ adsorbabilities of ~434.8, ~277.7, and ~261.8 mg/g, respectively, in a single-ion adsorption system with the adsorption kinetics and isotherm complied with pseudo-second-order and Langmuir models, respectively. In a multi-ion adsorption system, hydrogel removes mixed metal cations with slightly higher selectivity for Cu²⁺. In accordance with X-ray photoelectron and Fourier-transform-infrared spectrometric analyses, a plausible binding mechanism of metal cations on the as-prepared hydrogel was proposed by chelation between hydrogel functional groups and metal ions. In the repetitive adsorption/desorption experiments, the hydrogel retained >40% metal ion adsorption and desorption capacities after four cycles. Furthermore, the Cu²⁺-adsorbing hydrogel could serve as a support for the in situ development of Cu nanoparticles, which showed excellent catalytic performance as demonstrated by the transformation of 4-nitrophenol (4-NP) to 4-aminophenol. This work provides a novel ecofriendly, reusable, and highly-efficient adsorbent, as well as a biocatalyst for remediation of heavy metal cations and 4-NP polluted effluents.

Characteristics of overflow pollution from combined sewer sediment: Formation, contribution and regulation

Sewer sediments contain high concentrations of carbon, nitrogen, and phosphorus pollutants, which can be the main source of overflow pollution due to high-velocity scouring. To elucidate the scouring overflow pollution characteristics and regulation mechanism of sewer sediment under different precipitation intensities, a sewer-storage tank linkage control experimental device was established to simulate the practical sewer overflow under different precipitation intensities and the control process of storage tank overflow pollutants. Based on the division of flow from small to large, the pollution characteristics of overflow pollutants and the contribution rate of sewer sediments to overflow pollutants were analysed. The results showed that the total load of overflow pollutants increased with an increase in rainfall intensity and were 7.58 kg, 16.54 kg, 27.42 kg, respectively. The concentration of particulate pollutants increased sharply in a short time, and the concentration of dissolved pollutants decreased at a certain dilution. Sewer sediment was the main source of overflow pollutants, contributing up to 70%. After the overflow pollutants entered the regulation and storage tank, a certain stratification phenomenon was discovered at different sedimentation times. The concentration of large particle pollutants gradually increased from top to bottom in the regulation and storage tank, and the concentration of dissolved pollutants showed no obvious difference between the layers. With an increase in rainfall intensity, the recommended regulation and storage times of overflow pollutants were within 15 min, 45-60 min, and 60 min, respectively. Finally, based on the relationship among rainfall intensity, sediment scouring thickness, regulation and storage time, a prediction formula for the regulation and storage time of overflow pollutants was obtained, which provided a basis for the regulation and treatment of subsequent overflow pollutants.

A review on biofiltration techniques: Recent advancements in the removal of volatile organic compounds and heavy metals in the treatment of polluted water

Good quality of water determines the healthy life of living beings on this earth. The cleanliness of water was interrupted by the pollutants emerging out of several human activities. Industrialization, urbanization, heavy population, and improper disposal of wastes are found to be the major reasons for the contamination of water. Globally, the inclusion of volatile organic compounds (VOCs) and heavy metals released by manufacturing industries, pharmaceuticals, and petrochemical processes have created environmental issues. The toxic nature of these pollutants has led researchers, scientists, and industries to exhibit concern towards the complete eradication of them. In this scenario, the development of wastewater treatment methodologies at low cost and in an eco-friendly way had gained importance at the international level. Recently, bio-based technologies were considered for environmental remedies. Biofiltration based works have shown a significant result for the removal of volatile organic compounds and heavy metals in the treatment of wastewater. This was done with several biological sources such as bacteria, fungi, algae, plants, yeasts, etc. The biofiltration technique is cost-effective, simple, biocompatible, sustainable, and eco-friendly compared to conventional techniques. This review article provides deep insight into biofiltration technologies engaged in the removal of volatile organic compounds and heavy metals in the wastewater treatment process.

Spectroscopic characterization of dissolved organic matter from macroalgae Ulva pertusa decomposition and its binding behaviors with Cu(II)

Dissolved organic matter (DOM) from macroalgae is regarded a crucial source of autochthonous DOM in coastal ocean. In the present study, the characteristics of DOM from the macroalgae Ulva pertusa decomposition (U. pertusa-DOM) and its binding behaviors with Cu(II) using multiple spectroscopic techniques and chemometric analyses. The labile U. pertusa-DOM could be consumed and transformed by microorganisms. The absorption spectroscopic descriptors indicate that the hydrophobicity, aromaticity, and molecular weight of the U. pertusa-DOM increase during the 27-day incubation period. Fluorescence excitation-emission matrix spectroscopy combined with parallel factor analysis suggests that the relative abundance of the protein-like component (C1) (96.10-84.96%) sequentially decreases, whereas the humic-like components (C2) (2.16-9.73%) and (C3) (1.75-5.31%) in the U. pertusa-DOM increase with the U. pertusa decomposition. The Cu(II) binding properties of the U. pertusa-DOM are dependent on the decomposition time. The order of the conditional stability constant (logK_M) is C2 > C1 > C3. The complexation capacity (f) of C1 is higher than those of C2 and C3 at a specific time. Synchronous fluorescence spectroscopy coupled with two-dimensional correlation spectroscopy reveals that the microbial degradation could accelerate the Cu(II) binding to humic-like fractions in the U. pertusa-DOM. These findings will help us better understand the biogeochemical behaviors of macroalgal DOM and heavy metal in coastal ecosystems.

Quantitative source apportionment of dissolved organic matters in wet weather overflows of storm drainage systems based on degradation potential index and end member mixing model

Dissolved organic matter (DOM) in wet weather overflows (WWFs) of storm drainage systems mainly originates from anthropogenic sources, such as paved runoff, illegally discharged domestic sewage and the retained sediment. This study provides a promising method to quantitatively apportion the WWF DOM of storm drainage systems using degradation potential index (DPI) and end member mixing (EMM) model. DPI is derived from excitation-emission matrix parallel factor analysis (EEM-PARAFAC), which can endow the end members and itself of WWF DOM with numerical features, and thus help quantify the source contributions of WWF DOM in EMM model. Findings show that (1) DPI was a reliable tool in the quantitative source apportionment of WWF DOM, owing to its features of small variance within source and large variances between sources; (2) DPI combined with EMM model could help identify the factors that induce significant impacts on the source contributions of WWF DOM, such as the storm pumping discharge and antecedent dry days in our case study; (3) the identified factors could guide the development of effective strategies for WWF DOM control, e.g. sediment management in our case.

Use and treatment of chicken feathers as a natural adsorbent for the removal of copper in aqueous solution

PURPOSE

Copper is a heavy metal that causes considerable deterioration to human health and ecosystems, so their elimination in water bodies is of great interest. Present investigation shows the efficiency of chicken feather as a natural adsorbent and its subsequent degradation in order to have an integral treatment and avoid the unconscious disposition.

METHODS

Optimal conditions of adsorption process were determined using the Response Surface Methodology (RSM)-Box-Behnken design (BBD) with three variables (pH, temperature and adsorbent dose). After that, the optimal conditions were used to analize the adsorption isotherms by Langmuir, Freundlich and Temkin models; also thermodynamics parameters Gibbs free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) were obtained. Finally, the biodegradation of the residue denominated "adsorbent-adsorbate" complex was evaluated through monitoring the soluble protein production, keratinolytic activity, ninhydrin positive products, sulfhydryl groups, and gravimetrically analysis.

RESULTS

The optimum conditions for the adsorption were 30°C and pH 3, the Langmuir model was better described the adsorption process at 30°C, while at 40°C was Temkin model. The chicken feather turned out a natural adsorbent competitive with respect to others used in the removal of copper in liquid systems; obtaining qmax of 7.84 and 11.48 mg/g at 30 and 40°C, respectively; it was also a favorable and spontaneous process. Finally the adsorbent used was degraded by a keratinolytic consortium.

CONCLUSIONS

In this study, chicken feather was used as a low cost adsorbent for copper efficiently and with the feasibility that the adsorbent can be biodegraded and release the metal.