Transformation of bromophenols by aqueous chlorination and exploration of main reaction mechanisms

Hypochlorite-mediated degradation and detoxification of sulfathiazole in aqueous solution and soil slurry

Although various activated sodium hypochlorite (NaClO) systems were proven to be promising strategies for recalcitrant organics treatment, the direct interaction between NaClO and pollutants without explicit activation is quite limited. In this work, a revolutionary approach to degrade sulfathiazole (STZ) in aqueous and soil slurry by single NaClO without any activator was proposed. The results demonstrated that 100% and 94.11% of STZ could be degraded by 0.025 mM and 5 mM NaClO in water and soil slurry, respectively. The elimination of STZ was shown to involve superoxide anion (O2•-), chlorine oxygen radical (ClO•), and hydroxyl radical (•OH), according to quenching experiments and the analysis of electron paramagnetic resonance. The addition of Cl-, HCO3-, SO42-, and humic acid (HA) marginally impeded the decomposition of STZ, while NO3-, Fe3+, and Mn2+ facilitated the process. The NaClO process exhibited significant removal effectiveness at a neutral initial pH. Moreover, the NaClO facilitated application in various soil samples and water matrices, and the procedure was also successful in effectively eliminating a range of sulfonamides. The suggested NaClO degradation mechanism of STZ was based on the observed intermediates, and the majority of the products exhibited lower ecotoxicity than STZ. Besides, the experiment results by using X-ray diffraction (XRD) and a fourier transform infrared spectrometer (FTIR) indicated the negligible effects on the composition and structure of soil by the treatment of NaClO. Simultaneously, the experimental results also illustrated that the bioavailability of heavy metals and the physiochemical characteristics of the soil before and after the remediation did not change to a significant extent. Following the remediation of NaClO, the phytotoxicity tests showed reduced toxicity to wheat and cucumber seeds. As a result, treating soil and water contaminated with STZ by using NaClO was a reasonably practical and eco-friendly method.

Enhanced permanganate oxidation of phenolic pollutants by alumina and potential industrial application

In this study, we found that alumina (Al2O3) may improve the degradation of phenolic pollutants by KMnO4 oxidation. In KMnO4/Al2O3 system, the removal efficiency of 2,4-Dibromophenol (2,4-DBP) was increased by 26.5%, and the apparent activation energy was decreased from 44.5 kJ/mol to 30.9 kJ/mol. The mechanism of Al2O3-catalytic was elucidated by electrochemical processes, X-ray photoelectron spectroscopy (XPS) characterization and theoretical analysis that the oxidation potential of MnO4- was improved from 0.46 V to 0.49 V. The improvement was attributed to the formation of coordination bonds between the O atoms in MnO4- and the empty P orbitals of the Al atoms in Al2O3 crystal leading to the even-more electron deficient state of MnO4-. The excellent reusability of Al2O3, the good performance on degradation of 2,4-DBP in real water, the satisfactory degradation of fixed-bed reactor, and the enhanced removal of 6 other phenolic pollutants demonstrated that the KMnO4/Al2O3 system has satisfactory potential industrial application value. This study offers evidence for the improvement of highly-efficient MnO4- oxidation systems.

Theoretical explanation of direct photolysis and indirect photolysis of bendazone with •OH, •SO4-, and •CO3- in water: mechanism insights and ecotoxicity evaluation

Bendazone (BNTE) is an herbicide and a highly concerned pollutant in aquatic environments. Understanding the photochemical behavior of BNTE in water is crucial for evaluating its photochemical conversion process in aquatic environments. This study analyzed the direct photolysis and indirect photolysis pathways of two dissociated forms of BNTE in water through density functional theory and time-dependent density functional theory method. The results show that the reaction types of indirect photolysis of BNTE with free radicals (•OH, •SO4-, and •CO3-) are OH- addition, SO4- addition, and CO3- addition. In the process of indirect photolysis of BNTE and free radicals, the photolysis of •OH and BNTE was the easiest, followed by •SO4-. In addition, the active site of BNTE reacting with •OH is C8, and the active site of BNTE reacting with •SO4- is C10. However, the photolysis effect of •CO3- on BNTE is very small, indicating that •CO3- in water plays a secondary role in the indirect photolysis of BNTE. In the direct photolysis of BNTE, N1-C6 bond breaking is difficult to occur spontaneously in the environment due to its high endothermic property and energy barrier. The direct photolysis pathway of BNTE involves the break of the N1-S2/S2-N3/N3-C12 bond. In addition, the ecological toxicity evaluation showed that toxicity of most of the degradation products were reduced, but the toxicity level was still maintained at a harmful level. Our findings provide the photochemical fate of BNTE in aquatic environments and will help to more accurately understand their photochemical conversion mechanisms in the environment.

Assessment of the UV/DCCNa and UV/NaClO oxidation process for the removal of diethyl phthalate (DEP) in the aqueous system

In this work, the removal and transformation process of diethyl phthalate (DEP) in UV/dichloroisocyanurate (UV/DCCNa) and UV/sodium hypochlorite (UV/NaClO) systems were compared to evaluate the application potential of UV/DCCNa technology. Compared with UV/NaClO, UV/DCCNa process has the advantage of DEP removal and caused a higher degradation efficiency (93.8%) within 45 min of oxidation in ultrapure water due to the sustained release of hypochloric acid (HOCl). Fourteen intermediate products were found by high-resolution mass spectrometry, and the transformation patterns including hydroxylation, hydrolysis, chlorination, cross-coupling, and nitrosation were proposed. The oxidation processes were also performed under quasi-realistic environmental conditions, and it was found that DEP could be effectively removed in both systems, with yields of disinfection byproduct meeting the drinking water disinfection standard (<60.0 μg/L). Comparing the single system, the removal of DEP decreased in the mixed system containing five kinds of PAEs, which could be attributed to the regeneration of DEP and the competitive effect of •OH occurred among the Dimethyl phthalate (DMP), DEP, Dipropyl phthalate (DPrP), Diallyl phthalate (DAP) and Diisobutyl phthalate (DiBP). However, a greater removal performance presented in UV/DCCNa system compared with UV/NaClO system (69.4% > 62.1%). Further, assessment of mutagenicity and developmental toxicity by Toxicity Estimation Software Tool (T.E.S.T) software indicated that UV/DCCNa process has fewer adverse effects on the environment and is a more environmentally friendly chlorination method. This study may provide some guidance for selecting the suitable disinfection technology for drinking water treatment.

Photodegradation fate of different dissociation species of antidepressant paroxetine and the effects of metal ion Mg2+: Theoretical basis for direct and indirect photolysis

Paroxetine (abbreviated as PXT) has been widely used as one of the standard antidepressants for the treatment of depression. PXT has been detected in the aqueous environment. However, the photodegradation mechanism of PXT remains unclear. The present study aimed to use density functional theory and time-dependent density functional theory to study the photodegradation process of two dissociated forms of PXT in water. The main mechanisms include direct and indirect photodegradation via reaction with ·OH and ¹O₂ and photodegradation mediated by the metal ion Mg²⁺. Based on the calculations, PXT and PXT-Mg²⁺ complexes in water are photodegraded mainly indirectly and directly. It was found that PXT and PXT-Mg²⁺ complexes were photodegraded by H-abstraction, OH-addition and F-substitution. The main reaction of PXT indirect photolysis is OH-addition reaction, while the main reaction of PXT⁰-Mg²⁺ complex is H-abstraction. All the reaction pathways of H-abstraction, OH-addition and F-substitution are exothermic. PXT⁰ reacts more readily with ·OH or ¹O₂ in water than PXT⁺. However, the higher activation energy of PXT with ¹O₂ indicates that the ¹O₂ reaction plays a minor role in the photodegradation pathway. The direct photolysis process of PXT includes ether bond cleavage, defluorination, and dioxolane ring-opening reaction. In the PXT-Mg²⁺ complex, the direct photolysis process occurs via a dioxolane ring opening. Additionally, Mg²⁺ in water has a dual effect on the direct and indirect photolysis of PXT. In other words, Mg²⁺ can inhibit or promote their photolytic reactions. Overall, PXT in natural water mainly undergo direct and indirect photolysis reactions with ·OH. The main products include direct photodegradation products, hydroxyl addition products and F-substitution products. These findings provide critical information for predicting the environmental behavior and transformation of antidepressants.

Chlorination of methotrexate in water revisited: Deciphering the kinetics, novel reaction mechanisms, and unexpected microbial risks

Chlorination of a typical anticancer drug with annually ascending use and global prevalence (methotrexate, MTX) in water has been studied. In addition to the analysis of kinetics in different water/wastewater matrices, high-resolution product identification and in-depth secondary risk evaluation, which were eagerly urged in the literature, were performed. It was found that the oxidation of MTX by free available chlorine (FAC) followed first-order kinetics with respect to FAC and first-order kinetics with respect to MTX. The pH-dependent rate constants (k_app) ranged from 170.00 M^-1 s^-1 (pH 5.0) to 2.68 M^-1 s^-1 (pH 9.0). The moiety-specific kinetic analysis suggested that 6 model substructures of MTX exhibited similar reactivity to the parent compound at pH 7.0. The presence of Br^- greatly promoted MTX chlorination at pH 5.0-9.0, which may be ascribed to the formation of bromine with higher reactivity than FAC. Comparatively, coexisting I^- or humic acid inhibited the degradation of MTX by FAC. Notably, chlorination effectively abated MTX in different real water matrices. The liquid chromatography-high resolution mass spectrometry analysis of multiple matrix-mediated chlorinated samples indicated the generation of nine transformation products (TPs) of MTX, among which seven were identified during FAC oxidation for the first time. In addition to the reported electrophilic chlorination of MTX (the major and dominant reaction pathway), the initial attacks on the amide and tertiary amine moieties with C-N bond cleavage constitute novel reaction mechanisms. No genotoxicity was observed for MTX or chlorinated solutions thereof, whereas some TPs were estimated to show multi-endpoint aquatic toxicity and higher biodegradation recalcitrance than MTX. The chlorinated mixtures of MTX with or without Br^- showed a significant ability to increase the conjugative transfer frequency of plasmid-carried antibiotic resistance genes within bacteria. Overall, this work thoroughly examines the reaction kinetics together with the matrix effects, transformation mechanisms, and secondary environmental risks of MTX chlorination.

Simulation degradation of bromophenolic compounds in chlorine-based advanced oxidation processes: Mechanism, microscopic and apparent kinetics, and toxicity assessment

Chlorine-based advanced oxidation processes (AOPs) have been extensively studied to remove contaminants through generating HO^• and reactive chlorine species, including ClO^• and Cl^•. In this work, 2,4,6-tribromoanisole (246TBA) and 2,4,6-tribromophenol (246TBP) were selected as model to investigate the reaction mechanisms and micro-kinetics of brominated contaminants with HO^•, ClO^• and Cl^• in chlorine-based AOPs. Also, the apparent degradation kinetics of two compounds were simulated at pH 3.0-9.5 under UV/H₂O₂, UV/chlorine and UV/NH₂Cl. Calculated results showed that neutral 246TBA and 246TBP exhibited similar reactivity to HO^• and ClO^•, which was different from anionic 2,4,6-tribromophenolate (246TBPT): radical adduct formation (RAF) and H atom abstraction (HAA) were predominant mechanisms for the HO^• and ClO^• initiated reactions of 246TBA and 246TBP, while RAF and single electron transfer (SET) for 246TBPT; the reaction rate constants of 246TBA and 246TBP with HO^• and ClO^• were lower than 10⁷ M^-1 s^-1, and such rate constants dramatically increased to 10¹⁰ M^-1 s^-1 once 246TBP was deprotonated to 246TBPT. The apparent degradation kinetics of 246TBA at pH 3.0-9.5 was simulated in the order of UV/NH₂Cl > UV/chlorine > UV/H₂O₂, and UV/chlorine and UV/NH₂Cl were more effective for the removal of 246TBP and 246TBPT than UV/H₂O₂. UV and/or Cl^• dominated 246 TBA degradation under three AOPs. The main radicals mediating 246TBP and 246TBPT degradation are respectively HO^• under UV/H₂O₂, ClO^• under UV/chlorine, and HO^• and Cl^• under UV/NH₂Cl. The transformation products of 246TBA, 246TBP and 246TBPT, especially methoxylated and hydroxylated polybrominated diphenyl ethers (MeO-PBDEs and HO-PBDEs), were still toxic pollutants.

Study the Adsorption of Letrozole Drug on the Silicon Doped Graphdiyne Monolayer: a DFT Investigation

In the current study, by employing first-principles computations, the adsorption behavior of letrozole (LET) was investigated on the pristine graphdiyne nanosheet (GDY) as well as Si-doped graphdiyne (SiGDY). According to the adsorption energy, charge transfer value, and the change in the bang gap energy, the tendency of the pristine GDY towards LET is insignificant. However, the interaction of LET with SiGDY was strong and the adsorption energy was approximately − 19.20 kcal/mol. In addition, the associated electrical conductivity with SiGDY increased by approximately 23.53 % following the adsorption of LET. The results show that SiGDY can be employed as an electronic sensor to detect LET. Furthermore, LET is detected by SiGDY in the water phase based on the magnitude of solvation energy. Finally, a considerable charge-transfer between LET and SiGDY is a precondition for the adsorption of the LET molecule with proper binding energies, which delivers the Si atoms with a significant positive charge.

Transformation of bisphenol AF by chlorination: kinetic study and product identification

Bisphenol AF (BPAF), commonly used as a substitute for bisphenol A (BPA), is also an endocrine disruptor with cytotoxicity, neurotoxicity, genotoxicity, and biotoxicity. In this study, we found that BPAF could be effectively degraded by free chlorine. The second order rate constant of the reaction ranged from 1.67 to 126.67 M^-1·s^-1 in the pH range of 5.0-11.0. Nineteen products were detected by LC-Q-TOF-MS analysis, including chlorinated BPAF (i.e., mono/di/tri/tetrachloro-BPAF), 8 dimers, and 6 trimers. According to the identified products, two transformation pathways of electrophilic substitution and electron transfer are proposed. Humic acid (HA) could inhibit the degradation rate of BPAF due to its ability to reduce the reactive BPAF radical intermediates to the parent compound. The addition of low concentrations of Br^- and I^- accelerates the reaction rate of BPAF, due to the formation of HOBr and HOI with a higher oxidizing capacity. In seawater, BPAF degraded rapidly, and 16 new halogenated products were formed. Theoretical calculation shows that electrophilic substitution is more prone to occur at the ortho position of the hydroxyl group to form chlorinated products, while electron transfer tends to occur at the hydroxyl oxygen, resulting in the formation of BPAF radical and its subsequent coupling products.

Characterization of titanium influences on structure and thermodynamic stability of novel C20-nTin nanofullerenes (n=1-5): a density functional perspective

In this survey, effects of titanium heteroatom(s) on structural parameters and thermodynamic stability of C₂₀ fullerene and its C_20-nTi_n derivatives (n = 1-5) are compared and contrasted, at DFT levels of theory. The results show that in going from C₁₉Ti₁ to C₁₅Ti₅, binding energy increases while absolute value heat of atomization decreases. According to vibrational frequency analysis, excepting C₁₆Ti_4-1, the other optimized structures give no imaginary frequency as true minima. The calculated binding energy of 887.12 kcal mol^-1/atom displays C₁₅Ti₅ as the most thermodynamically stable heterofullerene. It has C_s symmetry and contains five titanium atoms alternatively in equatorial position. The substitutional doping of C₂₀ fullerene leads to high Mülliken charge distribution upon the surfaces of the resulted heterofullerenes especially C₁₉Ti₁ as suitable hydrogen storage. The contour plots indicate the most negative electrostatic potential by red color for C atoms, whereas the most positive electrostatic potential by yellow color for Ti heteroatoms. The contour plots and multiwfn analysis exhibit charge transfer from titanium heteroatoms to the neighboring carbon atoms. Furthermore, the resulted electron density maps from multiwfn qualitatively confirm the contour plot's findings. The hydrogen adsorption is an endothermic process for C₂₀ fullerene and exothermic process for C_20-nTi_n heterofullerenes. Major criteria examined for thermodynamic stability; from C₁₉Ti₁ to C₁₅Ti₅, binding energy and hydrogen adsorption increase while heat of atomization decreases.

Intermolecular difunctionalization of alkenes: synthesis of β-hydroxy sulfides

Direct difunctionalization of carbon-carbon double bonds is one of the most powerful tools available for concomitant introduction of two functional groups into olefinic substrates. In this context, vicinal hydroxysulfenylation of unactivated alkenes has emerged as a novel and straightforward strategy for the fabrication of β-hydroxy sulfides, which are extremely valuable starting materials in constructing various natural products, pharmaceuticals, and fine chemicals. The aim of this review is to summarize the most representative and important reports on the preparation of β-hydroxy sulfides through intermolecular hydroxysulfenylation of the corresponding alkenes with special emphasis on the mechanistic features of the reactions.

Efficient and selective catalytic hydroxylation of unsaturated plant oils: a novel method for producing anti-pathogens

With the increasing demand for antimicrobial agents and the spread of antibiotic resistance in pathogens, the exploitation of plant oils to partly replace antibiotic emerges as an important source of fine chemicals, functional food utility and pharmaceutical industries. This work introduces a novel catalytic method of plant oils hydroxylation by Fe(III) citrate monohydrate (Fe³⁺-cit.)/Na₂S₂O₈ catalyst. Methyl (9Z,12Z)-octadecadienoate (ML) was selected as an example of vegetable oils hydroxylation to its hydroxy-conjugated derivatives (CHML) in the presence of a new complex of Fe(II)-species. Methyl 9,12-di-hydroxyoctadecanoate 1, methyl-9-hydroxyoctadecanoate 2 and methyl (10E,12E)-octadecanoate 3 mixtures is produced under optimized condition with oxygen balloon. The specific hydroxylation activity was lower in the case of using Na₂S₂O₈ alone as a catalyst. A chemical reaction has shown the main process converted of plantoils hydroxylation and (+ 16 Da) of OH- attached at the methyl linoleate (ML-OH). HPLC and MALDI-ToF-mass spectrometry were employed for determining the obtained products. It was found that adding oxidizing agents (Na₂S₂O₈) to Fe³⁺ in the MeCN mixture with H₂O would generate the new complex of Fe(II)-species, which improves the C-H activation. Hence, the present study demonstrated a new functional method for better usage of vegetable oils.Producing conjugated hydroxy-fatty acids/esters with better antipathogenic properties. CHML used in food industry, It has a potential pathway to food safety and packaging process with good advantages, fundamental to microbial resistance. Lastly, our findings showed that biological monitoring of CHML-minimum inhibitory concentration (MIC) inhibited growth of various gram-positive and gram-negative bacteria in vitro study. The produced CHML profiles were comparable to the corresponding to previousstudies and showed improved the inhibition efficiency over the respective kanamycin derivatives.