Diversity and structure of microbial biofilms on microplastics in riverine waters of the Pearl River Delta, China

Microbiomes on microplastics versus natural microcarriers: Stability and transformation during aquatic travel from aquaculture ponds to adjacent stream

Microplastics (MPs) with different physical-chemical properties are considered as vectors for the propagation of microbes in aquatic environments. It remains unclear how plastic types impact on the plastisphere and whether different MPs spread microbes more rapidly than natural materials in microbes across distinct water bodies as proposed previously. We used in-situ incubation to investigate the microbes attached on MPs of polyethylene (PE), polypropylene (PP), and polyvinyl chloride (PVC), versus that on two natural microcarriers (quartz sands and bamboo) during the travel from aquaculture ponds with impacted by fish farming to adjacent freshwater stream. The results showed that the microbial communities on the carriers were shaped not only by environmental conditions, which were primary determinants but also by carrier types. All the tested plastics did not carry more microbes than the natural carriers during the journey. The biofilm community composition on PVC is distinct from that on PE and PP MPs and natural carriers. The plastisphere of PE and PP kept microbial proportions as natural materials did but PVC retained less than nature materials. Bamboo carried more potential pathogens than plastic polymers and quartz. The results indicated that the communities of plastisphere is polymer-type dependent, and, compared with the natural materials, MPs did not show enhanced propagation of microbes, including pathogens, cross distinct environments.

Occurrence, potential sources, and ecological risk assessment of microplastics in the inland river basins in Northern China

Microplastics (MPs) are the pollutants, found widely across various environmental media. However, studies on the MP pollution in urban rivers and the necessary risk assessments remain limited. In this study, the abundance and characteristics of microplastics in a typical urban river were examined to evaluate their distribution, sources, and ecological risks. It was observed that the abundance of MPs in sediments (220-2840 items·kg-1 dry weight (DW)) was much higher than that in surface water (2.9-10.3 items·L-1), indicating that the sediment is the "sink" of river MPs. Surface water and sediment were dominated by small particle size MPs (< 0.5 mm). Fiber and debris were common shapes of MPs in rivers and sediments. The microplastics in river water and sediments were primarily white and transparent, respectively. Polypropylene (PP) and polyethylene (PE) were the major polymers found.

Travertine deposition rather than tourism activity is the primary contributor to the microplastic risks in alpine karst lakes

Microplastics (MPs) are emerging as anthropogenic vectors to form plastisphere, facilitating microbiome colonization and pathogenic dissemination, thus contributing to environmental and health crises across various ecosystems. However, a knowledge gap persists regarding MPs risks and their driving factors in certain unique and vulnerable ecosystems, such as Karst travertine lakes, some of which are renowned World Natural Heritage Sites under ever-increasing tourism pressure. We hypothesized that tourism activities serve as the most important factor of MPs pollution, whereas intrinsic features, including travertine deposition can exacerbate potential environmental risks. Thus, metagenomic approaches were employed to investigate the geographical distribution of the microbiome, antibiotic resistance genes (ARGs), virulence factor genes (VFGs), and their combined environmental risks in Jiuzhaigou and Huanglong, two famous tourism destinations in Southwest China. The plastisphere risks were higher in Huanglong, contradicting our hypothesis that Jiuzhaigou would face more crucial antibiotic risks due to its higher tourist activities. Specifically, the levels of Lipopolysaccharide Lewis and fosD increased by sevenfold and 20-fold, respectively, from upstream to downstream in Huanglong, whereas in Jiuzhaigou, no significant accrual was observed. Structural equation modeling results showed that travertine deposition was the primary contributor to MPs risks in alpine karstic lakes. Our findings suggest that tourism has low impact on MPs risks, possibly because of proper management, and that travertine deposition might act as an MPs hotspot, emphasizing the importance of considering the unique aspects of travertine lakes in mitigating MPs pollution and promoting the sustainable development of World Natural Heritage Sites.

Plastic Litter Emits the Foraging Infochemical Dimethyl Sulfide after Submersion in Freshwater Rivers

Plastic pollution is widespread throughout aquatic environments globally, with many organisms known to interact with and ingest plastic. In marine environments, microbial biofilms that form on plastic surfaces can produce the odorous compound dimethyl sulfide (DMS), which is a known foraging cue. This has been shown to increase the ingestion of plastic by some invertebrates and therefore act as a biological factor which influences the risks of plastic to marine ecosystems. In freshwater however, the production of DMS has been largely overlooked, despite the known sensitivity of some freshwater species to this compound. To address this gap, the present study analyzed the production of DMS by biofilms which formed on low-density polyethylene and polylactic acid films after 3 and 6 weeks of submersion in either a rural or an urban United Kingdom river. Using gas chromatography-mass spectrometry, the production of DMS by these biofilms was consistently identified. The amount of DMS produced varied significantly across river locations and materials, with surfaces in the urban river generally producing a stronger signal and plastics producing up to seven times more DMS than glass control surfaces. Analysis of biofilm weight and photosynthetic pigment content indicated differences in biofilm composition across conditions and suggested that DMS production was largely driven by nonphotosynthetic taxa. For the first time this work has documented the production of DMS by plastic litter after submersion in freshwater rivers. Further work is now needed to determine if, as seen in marine systems, this production of DMS can encourage the interaction of freshwater organisms with plastic litter and therefore operate as a biological risk factor in the impacts of plastic on freshwater environments. Environ Toxicol Chem 2024;43:1485-1496. © 2024 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Applications of mathematical modelling for assessing microplastic transport and fate in water environments: a comparative review

Microplastics in the environment are considered complex pollutants as they are chemical and corrosive-resistant, non-biodegradable and ubiquitous. These microplastics may act as vectors for the dissemination of other pollutants and the transmission of microorganisms into the water environment. The currently available literature reviews focus on analysing the occurrence, environmental effects and methods of microplastic detection, however lacking a wide-scale systematic review and classification of the mathematical microplastic modelling applications. Thus, the current review provides a global overview of the modelling methodologies used for microplastic transport and fate in water environments. This review consolidates, classifies and analyses the methods, model inputs and results of 61 microplastic modelling studies in the last decade (2012-2022). It thoroughly discusses their strengths, weaknesses and common gaps in their modelling framework. Five main modelling types were classified as follows: hydrodynamic, process-based, statistical, mass-balance and machine learning models. Further, categorisations based on the water environments, location and published year of these applications were also adopted. It is concluded that addressed modelling types resulted in relatively reliable outcomes, yet each modelling framework has its strengths and weaknesses. However, common issues were found such as inputs being unrealistically assumed, especially biological processes, and the lack of sufficient field data for model calibration and validation. For future research, it is recommended to incorporate macroplastics' degradation rates, particles of different shapes and sizes and vertical mixing due to biofouling and turbulent conditions and also more experimental data to obtain precise model inputs and standardised sampling methods for surface and column waters.

Microplastics pollution in the Asian water tower: Source, environmental distribution and proposed mitigation strategy

Microplastics generated from fragmentation of leftover plastics and industrial waste has reached in the remotely located Asian water tower (AWT) region, the 3rd pole of earth and origin site of several freshwater rivers. The accumulation of microplastics in AWT ecosystem has potential to alter the climatic condition contributing in global warming and disturbing the biodiversity structural dynamics. The present paper provides a comprehensive critical discussion over quantitative assessment of microplastics in different ecosystems (i.e. river, lakes, sediment and snow or glacier) of AWT. The hydrodynamic fate and transport of microplastics and their ecological impact on hydromorphology and biodiversity of AWT has been exemplified. Furthermore, key challenges, perspectives and research directions are identified to mitigate microplastics associated problems. During survey, the coloured polyethylene and polyurethane fibers are the predominant microplastics found in most areas of AWT. These bio-accumulated MPs alter the rhizospheric community structure and deteriorate nitrogen fixation process in plants. Significance in climate change, MPs pollution is enhancing the emissions of greenhouse gases (NH3 by ∼34% and CH4 by ∼9%), contributing in global warming. Considering the seriousness of MPs pollution, this review study can enlighten the pathways to investigate the effect of MPs and to develop monitoring tools and sustainable remediation technologies with feasible regulatory strategies maintaining the natural significance of AWT region.

Soil plastisphere interferes with soil bacterial community and their functions in the rhizosphere of pepper (Capsicum annuum L.)

With a growing number of research reports on microplastics (MPs), there is increasing concern regarding MPs-induced contamination in soil ecological systems. Notwithstanding, the interaction between the plastisphere and rhizosphere microbial hotspots in soil-plant systems, as well as the diversity and composition of plastisphere microbial communities in such systems, remain largely unexplored. This study evaluated the response of rhizosphere bacterial communities to MPs at three growth stages of pepper and examined the bacterial communities present on MPs (plastisphere). The 16 S rRNA revealed that, under the stress of MPs, the Chao1 and Shannon index of the pepper soil bacterial community decreased. Meanwhile the relative abundance of Actinobacteriota was decreased, and that of Proteobacteria was increased. Furthermore, the plastisphere serves as a unique microbial habitat (niche) that recruits the colonization of specific bacterial groups, including potential plastic-degrading bacteria and potential pathogens (e.g., Massilia and Pseudomonas). Simultaneously, the plastisphere recruits specific bacteria that may impact the rhizosphere soil bacterial communities, thus indirectly affecting plant growth. Functional prediction using PICRUSt2 revealed higher activity in the plastisphere for Metabolism of terpenoids and polyketides, Human diseases, and Xenobiotics biodegradation and metabolism. Notably, the human diseases metabolic pathway exhibited increased activity, suggesting potential ecological risks associated with pathogens. These results highlighted that the plastisphere serves as a unique microbial habitat (niche) in the soil ecological systems, recruiting specific bacteria and potentially interfering with the surrounding soil microbial community, thereby influencing the functional characteristics of the soil ecological systems.

Monthly variation and transport of microplastics from the Soan River into the Indus River

The presence of plastic and microplastic pollution in freshwater systems receives extensive concerns for its accumulative trend and potential ecological impacts. This is the first annual study that investigated the monthly profile of plastic pollution in the mouth of the Soan River. Plastic pollutants comprising microplastic content up to 91.7 % were abundantly found during different seasons around the year, ranging from 132.7 items/m3 to 641.3 items/m3. The average abundance of plastics was significantly higher in August (641.3 ± 23.7 items/m3) than in other months. Overall, fibers, large microplastics (L-MPs), and transparent items were dominant by shape (57.7 %), size (61.9 %), and color (24.6 %), respectively. The highest average number of fibers (374.3/m3) and L-MPs (396 items/m3) were recorded during May and remained higher in the surface water from December to May. Fragments (432.3/m3) and S-MPs were observed higher (362.3 items/m3) during the peak rainy month of the summer monsoon season (August). Variations in the abundance and morphotypes were seemingly not only influenced by the seasonal change but also might be due to hydromorphological characteristics of the river, especially riverbed morphology, and the flow of the water. Only 5.2 % of the total items found were identified using μ-FTIR (micro-Fourier Transformed Infrared Spectroscope) which consisted of 70.7 % plastic items. Spectroscopy revealed that polyethylene terephthalate was an abundantly found polymer that largely prevailed in the form of fibers, followed by polypropylene and polyethylene. Most of the fragments, foams, and films were composed of polypropylene, polystyrene, and rayon respectively. Being an urban river, the polymeric profile demonstrated that anthropogenic activities had a significant impact on polluting the river. These findings are a very important source to understand the profile of plastic pollution in the Soan River and also a significant reference for policy-making in controlling plastic pollution among the riverine networks.

Role of traveling microplastics as bacterial carriers based on spatial and temporal dynamics of bacterial communities

Microplastics (MPs) are considered as distinct substrates for bacterial colonization, they can carry bacterial communities to travel around environments. The bacterial communities on traveling MPs prefer to be gradually consistent with those on local MPs that were always in the same environment, and this process of change in the bacterial communities on traveling MPs was called 'localization'. However, the dynamics of localization process and their influencing factors are still unclear. Therefore, we simulated the MPs migration process along the water flow direction in the estuary. We used quantitative analysis to study the dynamics of bacterial communities on the migrated MPs. We found the localization characteristics depended on the differences between the former and latter environments, as well as the preexisting bacteria. The localization degree was higher when the former and latter environments were similar. In most cases, compared with the first cultivation of pristine MPs, the time for localization was shorter. Moreover, although the entire bacterial communities tended to be localized, the preexisting bacteria on the migrated MPs had selective effects on subsequent bacterial colonization. Furthermore, the preexisting bacteria on MPs could set up the connections with the bacteria that existed at the latter site, and the stability of the entire bacterial communities on the migrated MPs increased with time. Overall, our findings indicated that the localization characteristics of bacterial communities on traveling MPs were related to the precultured time and environmental differences, which were helpful to understand the colonized bacteria transportation and MPs ecological effects.

Microplastics enrichment characteristics of antibiotic resistance genes and pathogens in landfill leachate

Microplastics (MPs) pollution is a pressing environmental issue for aquatic ecosystems. Landfill leachate is an important contributor of MPs and antibiotic resistant genes (ARGs). However, there are few studies on the colonization of ARGs and pathogens on MPs in leachate. This study conducted incubation experiments with polyethylene terephthalate (PET) and polypropylene (PP) MPs in landfill leachate which were about 3-5 years old (PL) and 5-10 years old (AL). After incubation, the bacterial cells colonized and grew on the surface of MPs, inducing the increase of oxygenated oxygen functional groups (e.g., hydroxyl, carbonyl) on the MPs surface. Real-time PCR indicated that MPs selectively enriched ARGs, such as genes tetM, tetC, mcr-1, aac(6')-Ib-cr, blaTEM and blaSHV in leachate. The diversity of bacterial communities on MPs was significantly increased in AL leachate, but decreased in PL leachate. The differences in bacterial communities in MPs biofilms were related to the type of MPs. Compared with AL leachate, the abundance of Chloroflexi increased by 15.7% on the PET, and the abundance of Acidobacteriota increased by 6.23 fold on the PP. The abundance of Firmicutes increased from 20.7% in PL leachate to 65.8% and 60.7% on PET and PP, respectively. Additionally, pathogens were observed to be more abundant on MPs compared to leachate. In particular, pathogens (Staphylococcus, Streptococcus, Enterobacter and Rhodococcus) associated with sul1 and sul2 were generally present at higher levels on MPs than in the surrounding leachate. These results provide significant implications for understanding the health risk of MPs in the environment.

Diversity characterization of bacteria and fungi in water, sediments and biofilms from Songhua River in Northeast China

Water, sediments, and biofilms are the typical microbial carriers in natural water environments. However, comparative analysis of the distribution of bacterial and fungal communities in different carriers within the same habitat is relatively lacking. Therefore, this study employed 16 S and ITS rRNA gene sequencing to identify bacterial and fungal community structures in water, sediments, and biofilm. The results show that (1) the OTUs numbers revealed that the bacterial abundance, at the levels of species, genus, and family, followed the order of sediments > water > biofilms, while the fungal abundance order was water > sediments > biofilms. In addition, bacteria were mainly present in sediments, while fungi were mainly present in water. (2) The α diversity index (Shannon, ACE, Simpson, and Chao1) order, for bacteria was: sediments > water > biofilms, indicating that the diversity and homogeneity of bacteria in sediments were relatively higher; for fungi was: water > sediments > biofilms, indicating that the diversity and abundance of fungi in water were high. (3) The core phylum of bacterial in the water, sediments, and biofilms was Cyanobacteria (31.3-46.1%) and Actinobacteria (27.6-36.1%); Proteobacteria (35.0-41.8%), Cyanobacteria (14.7-36.6%); and Proteobacteria (63.3-69.2%), respectively. (4) The mainly colonized fungal phyla in biofilms in the water, sediments, and biofilms were Basidiomycota (29.3-38.7%) and Ascomycota (16.2-27.7%); Zygomycota (13.1-17.5%), Basidiomycota (5.6-17.6%); and Zygomycota (23.8-44.2%). (5) There were significant species differences in bacterial and fungal communities in water, sediments, and biofilm by NMDS analysis. Findings are useful for guiding significance for the Biogeochemical cycle of elements, the environmental fate of pollutants, and the study of water ecosystems.

Salinity significantly reduces plastic-degrading bacteria from rivers to oceans

Microplastics (MPs) are found in rivers and offshore areas. However, there is a lack of detailed research on the changes of surface microbial species attached to MPs when MPs enter the sea. Moreover, no study has been conducted on changes to plastic-degrading bacteria during this process. In this study, using rivers and offshore in Macau, China as examples, bacterial diversity and bacterial species composition attached to surface water and MPs at four river sampling stations and four offshore sampling stations around Macau were studied. Plastic-degrading bacteria, plastic-related metabolic processes, and plastic-related enzymes were analyzed. The results showed that MPs-attached bacteria in rivers and offshore were different with the planktonic bacteria (PB). The proportion of major families on the surface of MPs continued to increase from rivers to estuaries. MPs could significantly enrich plastic-degrading bacteria both in rivers and offshore. The proportion of plastic-related metabolic pathways on the surface bacteria of MPs in rivers was higher than that in offshore waters. Bacteria on the surface of MPs in rivers may induce higher plastic degradation than offshore. Salinity significantly alters the distribution of plastic-degrading bacteria. MPs may degrade more slowly in the oceans, posing a long-term threat to marine life and human health.

Biomass formation and organic carbon migration potential of microplastics from a PET recycling plant: Implication of biostability

The growth of the polyethylene terephthalate (PET) mechanical recycling industry has resulted in the challenge of generating microplastics (MPs). However, little attention has been given to investigating the release of organic carbon from these MPs and their roles in promoting bacterial growth in aquatic environments. In this study, a comprehensive method is proposed to access the potential of organic carbon migration and biomass formation of MPs generated from a PET recycling plant, and to understand its impact on the biological systems of freshwater habitats. Various MPs sizes from a PET recycling plant were selected to conduct a series of tests, including the organic carbon migration test, biomass formation potential test, and microbial community analysis. The MPs smaller than 100 µm, which are difficult to remove from the wastewater, exhibited greater biomass in the observed samples (1.05 × 10¹¹ bacteria per gram MPs). Moreover, PET MPs altered the microbial diversity, with Burkholderiaceae becoming the most abundant, while Rhodobacteraceae was eliminated after being incubated with MPs. This study partly revealed that organic matter adsorbed on the surface of MPs was a significant nutrient source that increased biomass formation. PET MPs acted not only as carriers for microorganisms but also for organic matter. As a result, it is crucial to develop and refine recycling methods in order to decrease the production of PET MPs and minimize their adverse effects on the environment.

Microplastic biodegradability dependent responses of plastisphere antibiotic resistance to simulated freshwater-seawater shift in onshore marine aquaculture zones

MPs carrying ARGs can travel between freshwater and seawater due to intensive land-sea interaction in onshore marine aquaculture zones (OMAZ). However, the response of ARGs in plastisphere with different biodegradability to freshwater-seawater shift is still unknown. In this study, ARG dynamics and associated microbiota on biodegradable poly (butyleneadipate-co-terephthalate) (PBAT) and non-biodegradable polyethylene terephthalate (PET) MPs were investigated through a simulated freshwater-seawater shift. The results exhibited that freshwater-seawater shift significantly influenced ARG abundance in plastisphere. The relative abundance of most studied ARGs decreased rapidly in plastisphere after they entered seawater from freshwater but increased on PBAT after MPs entered freshwater from seawater. Besides, the high relative abundance of multi-drug resistance (MDR) genes occurred in plastisphere, and the co-change between most ARGs and mobile genetic elements indicated the role of horizontal gene transfer on ARG regulation. Proteobacteria was dominant phylum in plastisphere and the dominant genera, such as Allorhizobium-Neorhizobium-Pararhizobium-Rhizobium, Afipia, Gemmobacter and Enhydrobacter, were significantly associated with qnrS, tet and MDR genes in plastisphere. Moreover, after MPs entered new water environment, the ARGs and microbiota genera in plastisphere changed significantly and tended to converge with those in receiving water. These results indicated that MP biodegradability and freshwater-seawater interaction influenced potential hosts and distributions of ARGs, of which biodegradable PBAT posed a high risk in ARG dissemination. This study would be helpful for understanding the impact of biodegradable MP pollution on spread of antibiotic resistance in OMAZ.

Plastisphere microbiome: Methodology, diversity, and functionality

Broad topics of the plastisphere in various environments are reviewed, including its methodologies, diversity, functionality, and outlook.

Stronger Geographic Limitations Shape a Rapid Turnover and Potentially Highly Connected Network of Core Bacteria on Microplastics

Core microbiota is shared microbial taxa within the same habitat, which is important for understanding the stable and consistent components of the complex microbial assembly. However, information on the microplastic core bacteria from the river ecosystems is poor. Here, we investigated the composition and function of microplastic core bacteria from the Three Gorges Reservoir area along the approximate 662 km of the Yangtze River via full-length 16S rRNA gene sequencing, compared with those in water, sediment, and soil. The results showed that the spatial turnover of bacterial communities in four habitats supported deterministic processes dominated by niche differentiation, which shaped their core bacteria. The composition and function of microplastic core bacteria were significantly different from those in the other three habitats. Rhodobacteraceae was the main component of microplastic core bacteria, while the main component of core bacteria in water, sediment, and soil were Burkholderiaceae (21.90%), Burkholderiaceae (5.01%), Nitrosomonadaceae (4.61%), respectively. Furthermore, microplastic core bacteria had stronger geographic limitations along the Yangtze River in the Three Gorges Reservoir area. Stronger geographic limitations shaped the rapid community turnover and a potentially more connected network for the microplastic core bacteria than water, sediment, and soil. More importantly, microplastic core bacteria had strong potential functions of drug resistance and could cause risks to ecosystems and human health. Microplastic core bacteria were mainly influenced by sediment core bacteria, although the bacteria colonizing on microplastics could be from all the contact environments and original sources. These findings provide important insights into the composition, function, and association of microplastic core bacteria with their surrounding environment.

Potential effects of micro- and nanoplastics on phyllosphere microorganisms and their evolutionary and ecological responses

Plastic pollution is among the most urgent environmental and social challenges of the 21st century, and their influxes in the environment have altered critical growth drivers in all biomes, attracting global concerns. In particular, the consequences of microplastics on plants and their associated soil microorganisms have gained a large audience. On the contrary, how microplastics and nanoplastics (M/NPs) may influence the plant-associated microorganisms in the phyllosphere (i.e., the aboveground portion of plants) is nearly unknown. We, therefore, summarize evidence that may potentially connect M/NPs, plants, and phyllosphere microorganisms based on studies on other analogous contaminants such as heavy metals, pesticides, and nanoparticles. We show seven pathways that may link M/NPs into the phyllosphere environment, and provide a conceptual framework explaining the direct and indirect (soil legacy) effects of M/NPs on phyllosphere microbial communities. We also discuss the adaptive evolutionary and ecological responses, such as acquiring novel resistance genes via horizontal gene transfer and microbial degradation of plastics of the phyllosphere microbial communities, to M/NPs-induced threats. Finally, we highlight the global consequences (e.g., disruption of ecosystem biogeochemical cycling and impaired host-pathogen defense chemistry that can lead to reduced agricultural productivity) of altered plant-microbiome interactions in the phyllosphere in the context of a predicted surge of plastic production and conclude with pending questions for future research priorities. In conclusion, M/NPs are very likely to produce significant effects on phyllosphere microorganisms and mediate their evolutionary and ecological responses.

Bioremediation of microplastics in freshwater environments: A systematic review of biofilm culture, degradation mechanisms, and analytical methods

Microplastics, defined as particles <5 mm in diameter, are emerging environmental pollutants that pose a threat to ecosystems and human health. Biofilm degradation of microplastics may be an ecologically friendly approach. This review systematically summarises the factors affecting biofilm degradation of microplastics and proposes feasible methods to improve the efficiency of microplastic biofilm degradation. Environmentally insensitive microorganisms were screened, optimized, and commercially cultured to facilitate the practical application of this technology. For strain screening, technology should focus on microorganisms/strains that can modify the hydrophobicity of microplastics, degrade the crystalline zone of microplastics, and metabolise additives in microplastics. The biodegradation mechanism is also described; microorganisms secreting extracellular oxidases and hydrolases are key factors for degradation. Measuring the changes in molecular weight distribution (MWD) enables better analysis of the biodegradation behaviour of microplastics. Biofilm degradation of microplastics has relatively few applications because of its low efficiency; however, enrichment of microplastics in freshwater environments and wastewater treatment plant tailwater is currently the most effective method for treating microplastics with biofilms.

Microplastics as an underestimated emerging contaminant in solid organic waste and their biological products: Occurrence, fate and ecological risks

Microplastics (MPs), as an emerging pollutant, have been widely detected in aquatic, terrestrial, and atmospheric ecosystems. Recently, more researchers indicated that solid organic waste is also a crucial repository of MPs and has become a vital pollution source in ecosystems. Although the occurrence and fate of MPs in solid organic waste and the interaction between MPs and biological treatments have been explored, there still needs to be comprehensive summaries. Hence, this study reviewed the occurrence and characteristics of MPs in solid organic waste and organic fertilizers. Meanwhile, this study summarized the influence of MPs on biological treatments (composting and anaerobic digestion) and their degradation characteristics. MPs are abundant in solid organic waste (0-220 ×10³ particles/kg) and organic fertilizer (0-30 ×10³ particles/kg), PP and PE are the prominent MPs, and fibers and fragments are the main shapes. MPs can affect the carbon and nitrogen conversion during biological treatments and interfere with microbial communities. The MP's characteristics changed after biological treatments, which should further consider their potential ecological risks. This review points out the existing problems of MPs in organic waste recycling and provides directions for their treatment in the future.

The geographical and seasonal effects on the composition of marine microplastic and its microbial communities: The case study of Israel and Portugal

Introduction

Floating microplastic debris are found in most marine environments around the world. Due to their low density and high durability, plastic polymers such as polyethylene, polypropylene, and polystyrene serve as stable floating substrates for the colonization of diverse communities of marine organisms. Despite the high abundance of microplastic debris in the oceans, it is not clear how the geographical location and season affect the composition of marine microplastic and its bacterial microbiome in the natural environment.

Methods

To address this question, microplastic debris were collected from the sea surface near estuaries in the Mediterranean Sea (Israel) and in the Atlantic Ocean (Portugal) during summer and winter of 2021. The microplastic physical characteristics, including shape, color, and polymer composition, were analyzed and the taxonomic structure of the microplastic bacterial microbiome was characterized using a high-resolution metabarcoding pipeline.

Results

Our results, supported by previously published data, suggest that the plastisphere is a highly diverse ecosystem which is strongly shaped by spatial and temporal environmental factors. The geographical location had the highest impact on the plastisphere physical characteristics and its microbiome composition, followed by the season. Our metabarcoding analysis showed great variability between the different marine environments with a very limited microbiome "core."

Discussion

This notion further emphasizes the importance of plastisphere studies in different geographical locations and/or seasons for the characterization of the plastisphere and the identification of plastic-associated species.

UV stabilizers can foster early development of biofilms on freshwater microplastics

Interactions between microbes and microplastics are important as of emerging plastic loads in the global environment. Although diverse plastic additives are used in large amounts, there are very few studies on a quantitative comparison of plastisphere on plastics with different plastic additives. We studied the effects of two widely used UV stabilizers (benzotriazole-type UV-327 and benzophenone-type UV-531 were selected based on their persistence and toxicity) in low-density polyethylene (LDPE) on freshwater microbes. This is the first study on the sole effects of UV stabilizers used as plastic additives on freshwater in situ plastisphere biofilm development. Confocal laser scanning microscopy, assisted with proper differentiating fluorochromes and threshold-based 3D segmentation of data, was used to visualize and quantify biofilm. On the first week of biofilm growth, there was very little biovolume and a negligible amount of phototrophs on pristine LDPE contrasting other substrates. Biovolumes were significantly higher on LDPE with UV stabilizers (up to 159% higher than pristine LDPE), although the biomass was mostly dead due to toxicity (>100% higher dead biovolume than live biovolume in LDPE with UV stabilizers). After the fourth week, marginally higher biovolumes along with a revival of the biomass on LDPE with UV stabilizers were observed. The ability to induce microorganismic intracellular reactive oxygen species by UV stabilizers was detected, which may stimulate biofilm growth during the primary phase of biofilm development. Atomic force microscopy analysis denoted that LDPE with UV stabilizers exhibit considerably stronger adhesion force than pristine LDPE. These observations suggest that UV stabilizers can foster the early attachment of microbes to microplastics while killing the surface contacting layer. An alive upper layer of microbes can get developed on the dead biofilm without much disruption due to the toxicity of UV stabilizers. This occurrence can eventually boost the early development of biofilms on plastics.

Microplastics drive nitrification by enriching functional microorganisms in aquaculture pond waters

The plastisphere refers to biofilm formation on the microplastic (MP) surface, but its subsequent functions, especially driving the nitrogen biogeochemical cycle, are rarely studied. Here, MPs were incubated in the pelagic water and benthic water-sediment interface of an aquaculture pond, and the two corresponding microcosms amended with incubated plastisphere were simulated. The results showed decreased ammonia concentrations and increased nitrification rates in microcosms with either pelagic or benthic plastispheres. To uncover the possible mechanisms, the community structure and function of the plastisphere were investigated. As clarified by 16S rRNA, the community diversity of the pelagic plastisphere was significantly higher than that of the corresponding hydrosphere. Plastisphere communities, especially those incubated in pelagic water, were separated from the hydrosphere. Moreover, the abundance of Proteobacteria increased while the abundance of Cyanobacteria decreased in both plastispheres. Metagenome further revealed that the abundance of amoA and annotated Nitrososphaeraceae_archaeon and hao and affiliated Nitrosomonas_europaea, which contributed to ammonia oxidation to nitrite, was higher in the benthic plastisphere. Comparing the pelagic plastisphere with the corresponding hydrosphere, however, the abundance of nxrA and annotated Nitrobacter hamburgensis and nxrB and the affiliated Nitrospira moscoviensis, which are involved in nitrite oxidation, was more abundant in the plastisphere. These findings suggest that the plastisphere might selectively enrich functional microorganisms and genes in a habitat-dependent manner to promote nitrification in aquaculture ponds.

Microbial community niches on microplastics and prioritized environmental factors under various urban riverine conditions

Microplastics (MPs) provide habitats to microorganisms in aquatic environments; distinct microbial niches have recently been elucidated. However, there is little known about the microbial communities on MPs under urban riverine conditions, in which environmental factors fluctuate. Therefore, this study investigated MP biofilm communities under various urban riverine conditions (i.e., organic content, salinity, and dissolved oxygen (DO) concentration) and evaluated the prioritized factors affecting plastisphere communities. Nine biofilm-forming reactors were operated under various environmental conditions. Under all testing conditions, biofilms grew on MPs with decreasing bacterial diversity. Interestingly, biofilm morphology and bacterial populations were driven by the environmental parameters. We found that plastisphere community structures were grouped according to the environmental conditions; organic content in the water was the most significant factor determining MP biofilm communities, followed by salinity and DO concentration. The principal plastisphere communities were Proteobacteria, Bacteroidetes, Cyanobacteria, and Firmicutes phyla. In-depth analyses of plastisphere communities revealed that biofilm-forming and plastic-degrading bacteria were the predominant microbes. In addition, potential pathogens were majorly discovered in the riverine waters with high organic content. Our results suggest that distinct plastisphere communities coexist with MP particles under certain riverine water conditions, implying that the varied MP biofilm communities may affect urban riverine ecology in a variety of ways.

Ecotoxicological and health implications of microplastic-associated biofilms: a recent review and prospect for turning the hazards into benefits

Microplastics (MPs), over the years, have been regarded as a severe environmental nuisance with adverse effects on our ecosystem as well as human health globally. In recent times, microplastics have been reported to support biofouling by genetically diverse organisms resulting in the formation of biofilms. Biofilms, however, could result in changes in the physicochemical properties of microplastics, such as their buoyancy and roughness. Many scholars perceived the microplastic-biofilm association as having more severe consequences, providing evidence of its effects on the environment, aquatic life, and nutrient cycles. Furthermore, other researchers have shown that microplastic-associated biofilms have severe consequences on human health as they serve as vectors of heavy metals, toxic chemicals, and antibiotic resistance genes. Despite what is already known about their adverse effects, other interesting avenues are yet to be fully explored or developed to turn the perceived negative microplastic-biofilm association to our advantage. The major inclusion criteria for relevant literature were that it must focus on microplastic association biofilms, while we excluded papers solely on biofilms or microplastics. A total of 242 scientific records were obtained. More than 90% focused on explaining the environmental and health impacts of microplastic-biofilm association, whereas only very few studies have reported the possibilities and opportunities in turning the microplastic biofilms association into benefits. In summary, this paper concisely reviews the current knowledge of microplastic-associated biofilms and their adverse consequences and further proposes some approaches that can be developed to turn the negative association into positive.

Incubation habitats and aging treatments affect the formation of biofilms on polypropylene microplastics

Microbial colonization and biofilm formation associated with microplastics (MPs) have recently attracted wide attention. However, little is known about the effect of MP aging and different exposed habitats on biofilm formation and associated microbial community characteristics. To obtain a comprehensive understanding, virgin and aged polypropylene MPs were selected as attachment substrates and exposed to different aquatic habitats (marine, estuary, and river). The results showed that the aging process could destroy surface structure and increase oxygen-containing groups of MPs. The total biomass of the biofilms, attached-bacterial OTU numbers, and α diversities increased with exposure time. The biofilms biomass and α diversity of MPs in the river were significantly higher than those in the marine and estuary habitats, and temperature and salinity were primary factors affecting microbial colonization. Bacterial communities in MP-attached biofilms were significantly different from those in surrounding water. Microorganisms tend to adhere to aged MPs, and especially, genes related to human pathogens were significantly expressed on aged MPs, suggesting a potential ecological and health risk of aged MPs in aquatic ecosystems. Our results showed that aged MPs and different habitats have an important influence on microbial colonization, and the weathering process can accelerate biofilm formation on MPs.

Enrichment and dissemination of bacterial pathogens by microplastics in the aquatic environment

Microplastic pollution and associated impacts in the aquatic environment are spreading at an alarming rate worldwide. Plastic waste is increasing in the environment, and microplastics (MPs) are becoming a growing issue because they serve as vectors for pathogen transmission. This is the first comprehensive review that specifically addresses MPs as a source and vector of pathogenic bacteria, mainly associated with genera Vibrio, Pseudomonas, Acinetobacter, and so on, which are discovered to be more abundant on the aquatic plastisphere than that in the surrounding wastewater, freshwater, and marine water ecosystems. The horizontal gene transfer, chemotaxis, and co-selection and cross-selection could be the potential mechanism involved in the enrichment and dissemination of bacterial pathogens through the aquatic plastisphere. Further, bacterial pathogens through aquatic plastisphere can cause various ecological and human health impacts such as disrupted food chain, oxidative stress, tissue damages, disease transmission, microbial dysbiosis, metabolic disorders, among others. Last but not least, future research directions are also described to find answers to the challenging questions about bacterial pathogens in the aquatic plastisphere to ensure the integrity and safety of ecological and human health.

Microplastic-associated pathogens and antimicrobial resistance in environment

The ubiquitous use of microplastics and their release into the environment especially the water bodies by anthropogenic/industrial activities are the major resources for microplastic contamination. The widespread and often injudicious use of antimicrobial drugs or antibiotics in various sectors including human health and hygiene, agriculture, animal husbandry and food industries are leading to the release of antibiotics into the wastewater/sewage and other water bodies, particularly in urban setups and thus leads to the antimicrobial resistance (AMR) in the microbes. Microplastics are emerging as the hubs as well as effective carriers of these microbial pathogens beside their AMR-genes (ARGs) in marine, freshwater, sewage/wastewater, and urban river ecosystems. These drug resistant bacteria interact with microplastics forming synthetic plastispheres, the ideal niche for biofilm formations which in turn facilitates the transfer of ARGs via horizontal gene transfer and further escalates the occurrence and levels of AMR. Microplastic-associated AMR is an emerging threat for human health and healthcare besides being a challenge for the research community for effective management/address of this menace. In this review, we encompass the increasing prevalence of microplastics in environment, emphasizing mainly on water environments, how they act as centers and vectors of microbial pathogens with their associated bacterial assemblage compositions and ultimately lead to AMR. It further discusses the mechanistic insights on how microplastics act as hosts of biofilms (creating the plastisphere). We have also presented the modern toolbox used for microplastic-biofilm analyses. A review on potential strategies for addressing microplastic-associated AMR is given with recent success stories, challenges and future prospects.

Microplastics in Asian freshwater ecosystems: Current knowledge and perspectives

Plastic pollution in freshwater ecosystems, including microplastics (MPs) smaller than 5 mm, has become an emerging global concern. Asia is considered a "hot spot" for plastic pollution due to rapid economic and demographic growth, together with rapid urbanization. Here, we provide an overview of the current knowledge on MP abundance, sources, fate, and transfer in Asian freshwater ecosystems based on publications from January 2014 to May 2021. MP contamination in freshwater compartments, including water, sediment, and biota, was found to vary strongly. In water, it ranged from 0.004 items m^-3 in a moderately urbanized region to more than 500,000 items m^-3 in a dumping river in a highly populated watershed. In the sediment, MP abundance ranged from 1 to more than 30,000 items kg^-1 dry weight. Polyethylene (PE) and polypropylene (PP) were predominant in both water and sediment compartments. MP was detected in biota samples from all the studied species, but their abundance depended on the locations and species studied. Overall, MP characteristics (form, size, color, and polymer type) depended on sources and natural constraints (mainly hydrodynamics). This study also revealed that MP in Asian freshwater ecosystems mainly originated from domestic wastewater/runoff, followed by industrial emissions, fisheries and aquaculture wastewater. Plastic waste is not efficiently recycled or incinerated in Asia, leading to MP transfer and accumulation in the aquatic environment, and, more importantly, to ingestion by low to high trophic level organisms. This work highlights several knowledge gaps to guides future research to improve MP pollution management for the sustainable development of highly populated regions such as Asia.

Spatio-temporal variation of microplastic along a rural to urban transition in a tropical river

Microplastic pollution is widely recognised as a global issue, posing risks to natural ecosystems and human health. The combination of rapid industrial and urban development and relatively limited environmental regulation in many tropical countries may increase the amount of microplastic entering rivers, but basic data on contamination levels are lacking. This is especially the case in tropical South East Asian countries. In this paper, the abundance, composition and spatio-temporal variation of microplastic in the Langat River, Malaysia, were assessed, and the relationship between microplastic concentration and river discharge was investigated. Water samples were collected over a 12-month period from 8 sampling sites on the Langat, extending from forested to heavily urbanised and industrial areas. All 508 water samples collected over this period contained microplastic; mean concentration across all sites and times was 4.39 particles/L but extended up to 90.00 particles/L in some urban tributaries. Most microplastics were secondary in origin, and dominated by fibres. Microplastic counts correlated directly with river discharge, and counts increased and decreased in response to changes in flow. A time-integrated assessment of the microplastic load conveyed by the Langat suggested that the river is typically (50 % of the time) delivering around 5 billion particles per day to the ocean. The positive correlation between the concentration of microplastics and suspended sediments in the Langat suggested that continuously logging turbidity sensors could be used to provide better estimates of microplastic loads and improve assessment of human and ecological health risks.

Microplastic pollution in sophisticated urban river systems: Combined influence of land-use types and physicochemical characteristics

In the past decades, research on water pollution microplastics (MPs) has intensified tremendously. However, the relationship between MPs and environmental factors in urban river networks is under researched. Our study selected 65 sampling sites from a sophisticated urban river network system in Shanghai Municipality, China. Here, the combined influence of land-use types, river width, and water quality parameters to explore MPs distribution patterns. We found that MPs abundance ranged from 0.7 to 24.3 items/L, and the spatial difference in abundance was significant at a limited number of sampling sites. Fibrous MPs were the most abundant MPs in the river system. 72.7% of MPs <3 mm. Of the ten polymers detected, polypropylene and polyethylene terephthalate were predominant. In addition, cotton fiber was the main non-plastic component found in the samples. Moreover, land-use types showed no significant impact on MPs in the buffer zone of the sampling sites. However, point source pollution may cause an abnormal increase in MPs abundance. Through redundant analysis, we found that the phytoplankton abundance (e.g., chlorophyll-a) was influenced by MPs shape, while the river width influence MPs size. Construction activities were identified as the leading point source of pollution for the abnormal increase in local MPs pollution. Our results will inform on MPs distribution patterns in the super-metropolis river system.

Effects of Plastic Debris on the Biofilm Bacterial Communities in Lake Water

Increasing discharge of plastic debris into aquatic ecosystems and the worsening ecological risks have received growing attention. Once released, plastic debris could serve as a new substrate for microbes in waters. The complex relationship between plastics and biofilms has aroused great interest. To confirm the hypothesis that the presence of plastic in water affects the composition of biofilm in natural state, in situ biofilm culture experiments were conducted in a lake for 40 days. The diversity of biofilm attached on natural (cobble stones (CS) and wood) and plastic substrates (Polyethylene terephthalate (PET) and Polymethyl methacrylate (PMMA)) were compared, and the community structure and composition were also analyzed. Results from high-throughput sequencing of 16S rRNA showed that the diversity and species richness of biofilm bacterial communities on natural substrate (observed species of 1353~1945, Simpson index of 0.977~0.989 and Shannon–Wiener diversity index of 7.42~8.60) were much higher than those on plastic substrates (observed species of 900~1146, Simpson index of 0.914~0.975 and Shannon–Wiener diversity index of 5.47~6.99). The NMDS analyses were used to confirm the taxonomic significance between different samples, and Anosim (p = 0.001, R = 0.892) and Adonis (p = 0.001, R = 808, F = 11.19) demonstrated that this classification was statistically rigorous. Different dominant bacterial communities were found on plastic and natural substrates. Alphaproteobacterial, Betaproteobacteria and Synechococcophycideae dominated on the plastic substrate, while Gammaproteobacteria, Phycisphaerae and Planctomycetia played the main role on the natural substrates. The bacterial community structure of the two substrates also showed significant difference which is consistent with previous studies using other polymer types. Our results shed light on the fact that plastic debris can serve as a new habitat for biofilm colonization, unlike natural substrates, pathogens and plastic-degrading microorganisms selectively attached to plastic substrates, which affected the bacterial community structure and composition in aquatic environment. This study provided a new insight into understanding the potential impacts of plastics serving as a new habitat for microbial communities in freshwater environments. Future research should focus on the potential impacts of plastic-attached biofilms in various aquatic environments and the whole life cycle of plastics (i.e., from plastic fragments to microplastics) and also microbial flock characteristics using microbial plastics in the natural environment should also be addressed.