Fabrication of cylindrical 3D cellulose nanofibril(CNF) aerogel for continuous removal of copper(Cu2+) from wastewater

Recent advancements in bamboo nanocellulose-based bioadsorbents and their potential in wastewater applications: A review

The research interest in sustainable and eco-friendly materials based on natural sources has increased dramatically due to their recyclability, biodegradability, compatibility, and nontoxic behavior. Recently, nanocellulose-based green composites are under extensive exploration and have gained popularity among researchers owing to their lightweight, lost cost, low density, excellent mechanical and physical characteristics. This review provides a comprehensive overview of the recent advancements in the extraction, modification, and application of bamboo nanocellulose as a high-performance bioadsorbent. Bamboo, a rapidly renewable resource, offers an eco-friendly alternative to traditional materials due to its abundant availability and unique structural properties. Significantly, bamboo comprises a considerable amount of cellulose, approximately 40 % to 50%, rendering it a valuable source of cellulose fiber for the fabrication of cellulose nanocrystals. The review highlights different various modification techniques which enhance the adsorption capacities and selectivity of bamboo nanocellulose. Furthermore, the integration of bamboo nanocellulose into novel composite materials and its performance in removing contaminants such as heavy metals, dyes, and organic pollutants from wastewater are critically analyzed. Emphasis is placed on the mechanisms of adsorption, regeneration potential, and the economic and environmental benefits of using bamboo-based bioadsorbents. The findings underscore the potential of bamboo nanocellulose to play a pivotal role in developing sustainable wastewater treatment technologies, offering a promising pathway towards cleaner water and a greener future.

Dual magnetization and amination of cellulosic chains for the efficient adsorption of heavy metals

Compounds functionalized with hydroxyl and amino groups were found to have good potential for the adsorption of different ions. In this work, a new system of cellulosic chains was amended with amine substitutions and bonded to a magnetic core of NiFe2O4@SiO2 to form NiFe2O4@SiO2-cellulose-NH2 system. The prepared sample showed suitable magnetic separation and was characterized via XRD, FT-IR, SEM, EDS, and TGA-DTA analyses. The adsorption potential of NiFe2O4@SiO2-cellulose-NH2 system has been investigated on the heavy metals (Cd, Ni, and Pb) removal from a synthetic wastewater environment. The results show that the magnetic property created by the magnetic core increased the recycling potential of the adsorbent and the magnetic core has a positive effect on the absorption potential of the polymer. The adsorption removal of Cd(II), Ni(II), and Pb(II) ions was studied using NiFe2O4@SiO2-cellulose-NH2 systems in different pH, temperatures, metal ion concentrations, and adsorbent dosages. The maximum adsorption capacities of single heavy metal ions were obtained as 406.44 mg/g (for Cd(II) ions), 411.63 mg/g (for Ni(II) ions), and 414.68 mg/g (for Pb(II) ions) under optimized conditions as pH = 6.5, ion concentration: 500 mg/L, adsorbent dosage: 1.2 g/L and room temperature.

Development of cellulose-based biosorbents from the residue of the peach palm agribusiness and simulation of industrial scale-up for copper removal from Brazilian spirit

BACKGROUND

Cachaça (Brazilian spirit) is an alcoholic beverage of cultural and economic importance in Brazil. Its artisanal production is usually conducted in copper alembics, which results in contamination. The development of effective biosorbents from cheap matrices is an alternative to minimize both solid waste generation and copper levels in cachaça. The present work evaluates the obtention of nanocellulose-based materials from the major residue generated during the processing of palm heart from the Brazilian peach palm, through different processing techniques. Materials were characterized by physicochemical composition and their sorbent capacities for copper removal from aqueous solutions, and a simulation was conducted to evaluate potential application in the adequacy of cachaça to meet Brazilian legislation requirements.

RESULTS

The different processing methods resulted in different cellulose concentrations, with the highest concentration in the bleached material (B3, 694 g kg-1 of cellulose), and different specific surface areas (1.02-12.4 m2 g-1). Copper adsorption onto nanocellulose obtained from peach palm external sheath is fast, with a predominance of a chemisorption mechanism. Isotherms were best represented by Langmuir's model, suggesting a monolayer adsorption. Simulations indicate that B3 is a suitable material for the removal of copper from cachaça, and small amounts of biosorbent (733.5 g) are required for the reduction of copper concentrations (10 to 3 mg L-1) in 1000 L of cachaça.

CONCLUSION

This study demonstrated that the obtention of biosorbents from peach palm solid residues is promising and this nanocellulose-based material can be used for copper removal from contaminated cachaça. © 2024 Society of Chemical Industry.

Amino-functionalized cellulose composite for efficient simultaneous adsorption of tetracycline and copper ions: Performance, mechanism and DFT study

A novel cellulose composite (denoted as PEI@MMA-1) with porous interconnected structure was prepared by adsorbing methyl cellulose (MC) onto microcrystalline cellulose (MCC) and cross-linking polyethyleneimine (PEI) with MCC by the action of epichlorohydrin, which had the excellent adsorption property, wettability and elasticity. The performances of PEI@MMA-1 composite for removing tetracycline (TC), Cu2+ and coexistent pollutant (TC and Cu2+ mixture) were systematically explored. For single TC or Cu2+ contaminant, the maximum adsorption capacities were 75.53 and 562.23 mg/g at 30 °C, respectively, while in the dual contaminant system, they would form complexes and Cu2+ could play a "bridge" role to remarkably promote the adsorption of TC with the maximum adsorption capacities of 281.66 and 253.58 mg/g for TC and Cu2+. In addition, the adsorption kinetics, isotherms and adsorption mechanisms of single-pollutant and dual-pollutant systems have been thoroughly investigated. Theoretical calculations indicated that the amide group of TC molecule with the assistance of Cu2+ interacted with the hydroxyl group of PEI@MMA-1 composite to enhance the TC adsorption capacity. Cycle regeneration and fixed bed column experiments revealed that the PEI@MMA-1 possessed the excellent stability and utility. Current PEI@MMA-1 cellulose composite exhibited a promising application for remediation of heavy metals and antibiotics coexistence wastewater.

Salted Dried Bamboo Shoots-Derived Mesoporous Carbon Inherently Doped with SiC and Nitrogen for Capacitive Deionization

Dried bamboo shoots (DBS) are a natural resource with inherent silica content, which can serve as sacrificial templates for the formation of mesoporous carbon but also promote the generation of silicon carbide (SiC). Building on this, we introduced mesoporous and graphitic carbon/SiC (SiC/BSC) as the CDI electrode for copper ion (Cu2+) removal. Mesoporous carbon electrodes facilitate faster ion transport, diffusion, and electron-transfer pathways. Furthermore, SiC accelerates electron transfer and promotes faradic redox reactions during the charge and discharge processes. Consequently, the synergistic effect of SiC/BSC mesoporous carbon material leads to a promising electrode for Cu2+ capacitive deionization. Leveraging these unique properties, the SiC/BSC electrode material exhibits an outstanding CDI performance of 381.5 mg/g at 1.8 V. This study offers a strategy for the preparation of efficient mesoporous carbon materials as CDI electrodes, specifically tailored for the deionization of Cu2+ ions.

Review on recent advances in cellulose nanofibril based hybrid aerogels: Synthesis, properties and their applications

With the depletion of fossil fuels and growing environmental concerns, the modernized era of technology is in desperate need of sustainable and eco-friendly materials. The industrial sector surely has enough resources to produce cost-effective, renewable, reusable, and sustainable raw materials. The family of very porous solid materials known as aerogels has a variety of exceptional qualities, such as high porosity, high specific surface area, ultralow density, and superior thermal, acoustic, and dielectric properties. As a result, aerogels have the potential to be used for many different purposes, such as absorbents, supercapacitors, energy storage, and catalytic supports. Recently, cellulose nanofibril (CNF) aerogels have attracted remarkable attention for their large-scale utilization because of their high absorption capacity, low density, biodegradability, large surface area, high porosity, and biocompatibility. Recent advancements have confirmed that CNF-based hybrid aerogels can be proposed as the most privileged and promising novel material in various applications. This comprehensive review highlights the recent reports of the CNF-based hybrid aerogels, including their properties and frequent preparation approaches, in addition to their new applications in the areas of fire retardant, water and oil separation, supercapacitors, environmental, and CO2 capture. It is also assumed that this article will promote additional investigation and establish innovative capabilities to enhance novel CNF-based hybrid aerogels with new and exciting applications.

A novel magnetic Fe3O4/cellulose nanofiber/polyethyleneimine/thiol-modified montmorillonite aerogel for efficient removal of heavy metal ions: Adsorption behavior and mechanism study

To efficiently remove heavy metals from wastewater, designing an adsorbent with high adsorption capacity and ease of recovery is necessary. This paper presents a novel magnetic hybridized aerogel, Fe3O4/cellulose nanofiber/polyethyleneimine/thiol-modified montmorillonite (Fe3O4/CNF/PEI/SHMMT), and explores its adsorption performance and mechanism for Pb2+, Cu2+, and Cd2+ in aqueous solutions. The hybrid aerogel has a slit-like porous structure and numerous exposed active sites, which facilitates the uptake of metal ions by adsorption. Pb2+, Cu2+, and Cd2+ adsorption by the hybridized aerogel followed the second-order kinetics and the Langmuir isotherm model, the maximum adsorption of Pb2+, Cu2+, and Cd2+ at 25 °C, pH = 6, 800 mg/L was 429.18, 381.68 and 299.40 mg/g, respectively. The adsorption process was primarily attributed to monolayer chemical adsorption, a spontaneous heat-absorption reaction. FTIR, XPS and DFT studies confirmed that the adsorption mechanisms of Fe3O4/CNF/PEI/SHMMT on Pb2+, Cu2+, and Cd2+ were mainly chelation, coordination, and ion exchange. The lowest adsorption energy of Pb2+ on the hybrid aerogel was calculated to be -2.37 Ha by DFT, which indicates that the sample has higher adsorption affinity and preferential selectivity for Pb2+. After 5 cycles, the adsorption efficiency of the aerogel was still >85 %. The incorporation of Fe3O4 improved the mechanical properties of the aerogel. The Fe3O4/CNF/PEI/SHMMT has fast magnetic responsiveness, and it is easy to be separated and recovered after adsorption, which is a promising potential for the treatment of heavy metal ions.

Recent advances and future perspective on lignocellulose-based materials as adsorbents in diverse water treatment applications

The growing shortage of non-renewable resources and the burden of toxic pollutants in water have gradually become stumbling blocks in the path of sustainable human development. To this end, there has been great interest in finding renewable and environmentally friendly materials to promote environmental sustainability and combat harmful pollutants in wastewater. Of the many options, lignocellulose, as an abundant, biocompatible and renewable material, is the most attractive candidate for water remediation due to the unique physical and chemical properties of its constituents. Herein, we review the latest research advances in lignocellulose-based adsorbents, focusing on lignocellulosic composition, material modification, application of adsorbents. The modification and preparation methods of lignin, cellulose and hemicellulose and their applications in the treatment of diverse contaminated water are systematically and comprehensively presented. Also, the detailed description of the adsorption model, the adsorption mechanism and the adsorbent regeneration technique provides an excellent reference for understanding the underlying adsorption mechanism and the adsorbent recycling. Finally, the challenges and limitations of lignocellulosic adsorbents are evaluated from a practical application perspective, and future developments in the related field are discussed. In summary, this review offers rational insights to develop lignocellulose-based environmentally-friendly reactive materials for the removal of hazardous aquatic contaminants.

Cellulose phosphonate/polyethyleneimine nano-porous composite remove toxic Pb(II) and Cu(II) from water in a short time

Current cellulose-based adsorbents suffer from the drawbacks of low adsorption capacity or slow adsorption rate for heavy metal ions. It is imperative to prepare new cellulose-based materials to improve the adsorption ability. In this work, we aim to introduce phosphonate groups to improve the adsorption ability of cellulose and select polyethyleneimine (PEI) for synergistic adsorption. A novel cellulose phosphonate/polyethyleneimine composite (MCCP-PEI) is prepared via the Mannich reaction. The structure and composition of MCCP-PEI are characterized by various advanced microscopy and spectroscopy techniques, and the results show that MCCP-PEI possesses abundant nano-porous structure, strong chelating sites, and excellent hydrophilicity. Besides, the adsorption behavior of MCCP-PEI for heavy metals has been systematically investigated. The results show that the adsorbent can quickly remove toxic Cu(II) and Pb(II) from water within 15 min and 20 min, respectively. The saturated adsorption capacity for Cu(II) and Pb(II) is 250.0 and 534.7 mg·g-1, respectively. X-ray photoelectron spectroscopy analysis combined with Density Functional Theory calculations reveal that the adsorption mechanism is chemical complexation and electrostatic attraction, and the phosphonate group plays a key role in the adsorption process.

Tailoring the phase composition of carbon-coated nickel sulfides to achieve a high specific capacitance

As significant transition metal sulfides, nickel sulfides integrated with carbon were successfully synthesized in the presence of polyethylenimine and glutaraldehyde with a solvothermal route at 180 °C followed by carbonization. Glutaraldehyde prevented complete sulfur loss and allowed the formation of a mixed phase of nickel sulfide. The electrochemical performances of pure NiS2, NiS@C0, NiS2/NiS@C1, and NiS2/NiS@C2 electrodes were tested by a series of measurements. The specific capacitances obtained from GCD analysis were 698, 1160, 1484, and 908 F g-1 at 1 A g-1 for NiS2, NiS@C0, NiS2/NiS@C1, and NiS2/NiS@C2 electrodes, respectively. The results implied that the NiS2/NiS@C1 electrode possessed the highest specific capacitances and this study can be a good reference for the preparation of other hybrid metal sulfides as pseudocapacitive electrode materials.

Synthesis of cellulosic and nano-cellulosic aerogel from lignocellulosic materials for diverse sustainable applications: a review

Cellulosic aerogels are sustainable, biodegradable, and ultra-light porous materials with three-dimensional networks having high specific surface area. Depending on the source of precursor materials, they are categorized into plant-based aerogel, bacterial cellulosic aerogel. Different types of aerogels are also produced from microcrystalline cellulose (MCC), nanocrystalline cellulose (NCC), cellulose microfibril (CMF) and cellulose nanofibril (CNF). Furthermore, inorganic and organic substances are embedded to produce hybrid aerogel or composite aerogel for the enhancement of its performance in various fields. Mixing, gelation, solvent exchange, and drying (e.g., super critical carbon dioxide or freeze drying) are the basic steps involved in cellulosic aerogel synthesis. Based on the composition of precursors during aerogel synthesis, cellulosic aerogels have broad applications in various fields such as adsorbents, electrodes, sensors, captive deionization materials, catalysts, drug delivery, thermal and sound insulating materials. This review provided consolidated information on: (i) classification of cellulosic aerogels based on the sources of raw materials, (ii) processes involved to produce the cellulosic aerogel, (iii) cellulosic aerogel synthesized from MCC, NCC, CMF and CNF, (iv) nano particle doped cellulosic aerogel, and (v) its application in various field with future perspectives.

Multifunctional fully biobased aerogels for water remediation: Applications for dye and heavy metal adsorption and oil/water separation

Water ecosystem contamination from industrial pollutants is an emerging threat to both humans and native species, making it a point of global concern. In this work, fully biobased aerogels (FBAs) were developed by using low-cost cellulose filament (CF), chitosan (CS), citric acid (CA), and a simple and scalable approach, for water remediation applications. The FBAs displayed superior mechanical properties (up to ∼65 kPa m³ kg^-1 specific Young's modulus and ∼111 kJ/m³ energy absorption) due to CA acting as a covalent crosslinker in addition to the natural hydrogen bonding and electrostatic interactions between CF and CS. The addition of CS and CA increased the variety of functional groups (carboxylic acid, hydroxyl and amines) on the materials' surface, resulting in super-high dye and heavy metal adsorption capacities (619 mg/g and 206 mg/g for methylene blue and copper, respectively). Further modification of FBAs with a simple approach using methyltrimethoxysilane endowed aerogel oleophilic and hydrophobic properties. The developed FBAs showed a fast performance in water and oil/organic solvents separation with more than 96% efficiency. Besides, the FBA sorbents could be regenerated and reused for multiple cycles without any significant impact on their performance. Moreover, thanks to the presence of amine groups by addition of CS, FBAs also displayed antibacterial properties by preventing the growth of Escherichia coli on their surface. This work demonstrates the preparation of FBAs from abundant, sustainable, and inexpensive natural resources for applications in wastewater purification.

Preparation of Nanocellulose-Based Aerogel and Its Research Progress in Wastewater Treatment

Nowadays, the fast expansion of the economy and industry results in a considerable volume of wastewater being released, severely affecting water quality and the environment. It has a significant influence on the biological environment, both terrestrial and aquatic plant and animal life, and human health. Therefore, wastewater treatment is a global issue of great concern. Nanocellulose's hydrophilicity, easy surface modification, rich functional groups, and biocompatibility make it a candidate material for the preparation of aerogels. The third generation of aerogel is a nanocellulose-based aerogel. It has unique advantages such as a high specific surface area, a three-dimensional structure, is biodegradable, has a low density, has high porosity, and is renewable. It has the opportunity to replace traditional adsorbents (activated carbon, activated zeolite, etc.). This paper reviews the fabrication of nanocellulose-based aerogels. The preparation process is divided into four main steps: the preparation of nanocellulose, gelation of nanocellulose, solvent replacement of nanocellulose wet gel, and drying of nanocellulose wet aerogel. Furthermore, the research progress of the application of nanocellulose-based aerogels in the adsorption of dyes, heavy metal ions, antibiotics, organic solvents, and oil-water separation is reviewed. Finally, the development prospects and future challenges of nanocellulose-based aerogels are discussed.

Nanotechnology Applied to Cellulosic Materials

In recent years, nanocellulosic materials have attracted special attention because of their performance in different advanced applications, biodegradability, availability, and biocompatibility. Nanocellulosic materials can assume three distinct morphologies, including cellulose nanocrystals (CNC), cellulose nanofibers (CNF), and bacterial cellulose (BC). This review consists of two main parts related to obtaining and applying nanocelluloses in advanced materials. In the first part, the mechanical, chemical, and enzymatic treatments necessary for the production of nanocelluloses are discussed. Among chemical pretreatments, the most common approaches are described, such as acid- and alkali-catalyzed organosolvation, 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation, ammonium persulfate (APS) and sodium persulfate (SPS) oxidative treatments, ozone, extraction with ionic liquids, and acid hydrolysis. As for mechanical/physical treatments, methods reviewed include refining, high-pressure homogenization, microfluidization, grinding, cryogenic crushing, steam blasting, ultrasound, extrusion, aqueous counter collision, and electrospinning. The application of nanocellulose focused, in particular, on triboelectric nanogenerators (TENGs) with CNC, CNF, and BC. With the development of TENGs, an unparalleled revolution is expected; there will be self-powered sensors, wearable and implantable electronic components, and a series of other innovative applications. In the future new era of TENGs, nanocellulose will certainly be a promising material in their constitution.

Comparison between nanocellulose-polyethylenimine composites synthesis methods towards multiple water pollutants removal: A review

Nanocellulose/polyethylenimine composites have attracted growing attention due to their versatility as new materials for application in different fields. Water remediation is one of the traditional applications of these composites and their investigation as adsorbents for single water pollutants is well established. However, most water resources such as rivers, lakes, and even oceans contain complex mixtures of pollutants. Despite several recently published reviews on water purification technology, they only focused on these material as single pollutant removers and hardly mentioned their capacity to simultaneously recover multiple pollutants. Therefore, there is still a gap in the archived literature considering nanocellulose/polyethylenimine composites targeting water remediation with multiple water pollutants. In this review, methods for synthesizing such composites are classified and compared according to the mechanism of reactions, such as chemical crosslinking and physical adsorption, while outlining advantages and limitations. Then, the water pollutants mainly targeted by those composites are discussed in detail to expound the relationship between the synthesis method and the type and adsorption capacity. Finally, the last section presents challenges and opportunities of these nanocellulose/polyethylenimine composites as emerging sorbents for sustainable multiple water pollutants purification technologies. This review aims to lay out the basis for future developments of these composites for multiple water pollutants.

Chitosan-Based Architectures as an Effective Approach for the Removal of Some Toxic Species from Aqueous Media

Modified uncrosslinked and crosslinked chitosan derivatives were investigated as green sorbents for the removal of copper (Cu²⁺) and lead (Pb²⁺) cations from simulated solutions. In this regard, N, O carboxymethyl chitosan (N, O CMC), chitosan beads (Cs-g-GA), chitosan crosslinked with glutaraldehyde/methylene bisacrylamide (Cs/GA/MBA), and chitosan crosslinked with GA/epichlorohydrin (Cs/GA/ECH) were prepared and characterized by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy analyses. Atomic force microscopy investigation was carried out to compare the surface topography of the prepared samples before and after the metal uptake. The kinetics of the removal process were investigated by pseudo-first-order and -second-order models. Moreover, the adsorption isotherms were carefully studied by applying Langmuir and Freundlich models. The data reveal that upon adsorption of copper(II) metal ions, all chitosan-modified products followed the Langmuir isotherm except for Cs/GA/ECH which followed the Freundlich isotherms, and the highest adsorption capacity (q _e) was obtained for Cs/GA/MBA due to the formation of stable chelate structures between the metal cation and the functional groups present on the modified chitosan product. The order of metal uptake at the optimum pH value is as follows: Cs/GA/MBA (Cu: 95.7 mg/g, Pb: 99.15 mg/g), Cs/GA/ECH (Cu: 80.4 mg/g, Pb: 93.14 mg/g), Cs-g-GA (Cu: 77 mg/g, Pb: 88.4 mg/g), and N, O CMCh (Cu: 30.2 mg/g, Pb: 44.8 mg/g). The AFM data confirmed the metal uptake process by comparing the roughness and height measurements of the free sorbents and the metal-loaded sorbents.

Preparation and modification of nanocellulose and its application to heavy metal adsorption: A review

Heavy metals are a notable pollutant in aquatic ecosystems that results in many deadly diseases of the human body after enrichment through the food chain. As an environmentally friendly renewable resource, nanocellulose can be competitive with other materials at removing heavy metal ions due to its large specific surface area, high mechanical strength, biocompatibility and low cost. In this review, the research status of modified nanocellulose for heavy metal adsorbents is primarily reviewed. Two primary forms of nanocellulose are cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs). The preparation process of nanocellulose was derived from natural plants, and the preparation process included noncellulosic constituent removal and extraction of nanocellulose. Focusing on heavy metal adsorption, the modification of nanocellulose was explored in depth, including direct modification methods, surface grafting modification methods based on free radical polymerization and physical activation. The adsorption principles of nanocellulose-based adsorbents when removing heavy metals are analyzed in detail. This review may further facilitate the application of the modified nanocellulose in the field of heavy metal removal.

Cellulose: A Review of Water Interactions, Applications in Composites, and Water Treatment

Cellulose is known to interact well with water, but is insoluble in it. Many polysaccharides such as cellulose are known to have significant hydrogen bond networks joining the molecular chains, and yet they are recalcitrant to aqueous solvents. This review charts the interaction of cellulose with water but with emphasis on the formation of both natural and synthetic fiber composites. Covering studies concerning the interaction of water with wood, the biosynthesis of cellulose in the cell wall, to its dispersion in aqueous suspensions and ultimately in water filtration and fiber-based composite materials this review explores water-cellulose interactions and how they can be exploited for synthetic and natural composites. The suggestion that cellulose is amphiphilic is critically reviewed, with relevance to its processing. Building on this, progress made in using various charged and modified forms of nanocellulose to stabilize oil-water emulsions is addressed. The role of water in the aqueous formation of chiral nematic liquid crystals, and subsequently when dried into composite films is covered. The review will also address the use of cellulose as an aid to water filtration as one area where interactions can be used effectively to prosper human life.

Recyclable Magnetic Iron Immobilized onto Chitosan with Bridging Cu Ion for the Enhanced Adsorption of Methyl Orange

Chitosan (CS) is a natural and low-cost adsorbent for capturing metal ions and organic compounds. However, the high solubility of CS in acidic solution would make it difficult to recycle the adsorbent from the liquid phase. In this study, the CS/Fe₃O₄ was prepared via Fe₃O₄ nanoparticles immobilized onto a CS surface, and the DCS/Fe₃O₄-Cu was further fabricated after surface modification and the adsorption of Cu ions. The meticulously tailored material displayed the sub-micron size of an agglomerated structure with numerous magnetic Fe₃O₄ nanoparticles. During the adsorption of methyl orange (MO), the DCS/Fe₃O₄-Cu delivered a superior removal efficiency of 96.4% at 40 min, which is more than twice the removal efficiency of 38.7% for pristine CS/Fe₃O₄. At an initial MO concentration of 100 mg L^-1, the DCS/Fe₃O₄-Cu exhibited the maximum adsorption capacity of 144.60 mg g^-1. The experimental data were well explained by the pseudo-second-order model and Langmuir isotherm, suggesting the dominant monolayer adsorption. The composite adsorbent still maintained a large removal rate of 93.5% after five regeneration cycles. This work develops an effective strategy to simultaneously achieve high adsorption performance and convenient recyclability for wastewater treatment.

Polyethyleneimine-induced fluorescence enhancement strategy for AIEgen: the mechanism and application

Aggregation-induced emission luminogens (AIEgens) are attracting extensive research attention in the biosensor fields. Herein, we report a new polyethyleneimine (PEI)-induced strategy for enhancing luminescence of TCBPE (an AIEgen) to promote its development in biosensor. The copolymer dots (TCBPE-PEI) with high quantum yield (39.7%) and outstanding stability were synthesized via a one-pot method. The fluorescence enhancement mechanism based on the PEI strategy originated from the restriction of intramolecular motions of TCBPEs and the form of donor-acceptor structures to decrease the inherent energy bandgap. Benefiting from chelating property of TCBPE-PEI by Cu²⁺, a fluorescence-quenching sensor for Cu²⁺ detection was developed based on the fluorescence quenching of the electron transfer effect. Especially, a good linear range of 10-250 nM with a low limit of detection 1.1 nM was achieved, and it was further applied in samples successfully. The current work provides a novel approach to fabricate AIEgen biosensors and shows great potential in Cu²⁺ detection.

Bamboo Nanocellulose/Montmorillonite Nanosheets/Polyethyleneimine Gel Adsorbent for Methylene Blue and Cu(II) Removal from Aqueous Solutions

In recent years, the scarcity of pure water resources has received a lot of attention from society because of the increasing amount of pollution from industrial waste. It is very important to use low-cost adsorbents with high-adsorption performance to reduce water pollution. In this work, a gel adsorbent with a high-adsorption performance on methylene blue (MB) and Cu(II) was prepared from bamboo nanocellulose (BCNF) (derived from waste bamboo paper) and montmorillonite nanosheet (MMTNS) cross-linked by polyethyleneimine (PEI). The resulting gel adsorbent was characterized by Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (SEM), X-ray photoelectron spectroscopic (XPS), etc. The results indicated that the MB and Cu(II) adsorption capacities of the resulting gel adsorbent increased with the solution pH, contact time, initial concentration, and temperature before equilibrium. The adsorption processes of MB and Cu(II) fitted well with the fractal-like pseudo-second-order model. The maximal adsorption capacities on MB and Cu(II) calculated by the Sips model were 361.9 and 254.6 mg/g, respectively. The removal of MB and Cu(II) from aqueous solutions mainly included electrostatic attraction, ion exchange, hydrogen bonding interaction, etc. These results suggest that the resulting gel adsorbent is an ideal material for the removal of MB and Cu(II) from aqueous solutions.

Isotherm models for adsorption of heavy metals from water - A review

Adsorption is a widely used technology for removing and separating heavy metal from water, attributed to its eco-friendly, cost-effective, and high efficiency. Adsorption isotherm modeling has been used for many years to predict the adsorption equilibrium mechanism, adsorption capacity, and the inherent characteristics of the adsorption process, all of which are substantial in evaluating the performance of adsorbents. This review summarizes the development history, fundamental characteristics, and mathematical derivations of various isotherm models, along with their applicable conditions and application scenarios in heavy metal adsorption. The latest progress in applying isotherm models with a one-parameter, two-parameter, and three-parameter in heavy metal adsorption using carbon-based materials, which has gained much attention in recent years as low-cost adsorbents, is critically reviewed and discussed. Several experimental factors affecting the adsorption equilibrium, such as solution pH, temperature, ionic strength, adsorbent dose, and initial heavy metal concentration, are briefly discussed. The criteria for selecting the optimum isotherm for heavy metal adsorption are proposed by comparing various adsorption models and analyzing mathematical error functions. Finally, the relative performance of different isotherm models for heavy metal adsorption is compared, and the future research gaps are identified.

Advanced cellulose nanocrystals (CNC) and cellulose nanofibrils (CNF) aerogels: Bottom-up assembly perspective for production of adsorbents

The most common and abundant polymer in nature is the linear polysaccharide cellulose, but processing it requires a new approach since cellulose degrades before melting and does not dissolve in ordinary organic solvents. Cellulose aerogels are exceptionally porous (>90 %), have a high specific surface area, and have low bulk density (0.0085 mg/cm³), making them suitable for a variety of sophisticated applications including but not limited to adsorbents. The production of materials with different qualities from the nanocellulose based aerogels is possible thanks to the ease with which other chemicals may be included into the structure of nanocellulose based aerogels; despite processing challenges, cellulose can nevertheless be formed into useful, value-added products using a variety of traditional and cutting-edge techniques. To improve the adsorption of these aerogels, rheology, 3-D printing, surface modification, employment of metal organic frameworks, freezing temperature, and freeze casting techniques were all investigated and included. In addition to exploring venues for creation of aerogels, their integration with CNC liquid crystal formation were also explored and examined to pursue "smart adsorbent aerogels". The objective of this endeavour is to provide a concise and in-depth evaluation of recent findings about the conception and understanding of nanocellulose aerogel employing a variety of technologies and examination of intricacies involved in enhancing adsorption properties of these aerogels.

Bioaerogels, the emerging technology for wastewater treatment: A comprehensive review on synthesis, properties and applications

Over the past decade use of aerogels has received much attention as an emerging technology for wastewater treatment. However, production of aerogels is not environment-friendly. Owing to its excellent properties such as porosity, three-dimensional structure, being amenable to chemical modifications, it is imperative to devise strategies for their improved production and use. Bioaerogels are non-toxic and most of their precursor compounds are biomass-derived. This review aims to present a comprehensive report on survey of existing literature published on the use of bioaerogels for removal of all major categories of water contaminants, namely, heavy metals, industrial dyes, oil, organic compounds and pharmaceuticals. It also gives critical analysis of the lacunae in the existing knowledge such as lack of studies on domestic sewage, emerging pollutants, toxicity of raw materials and adequate disposal of used adsorbents. Proposals of overcoming the limitations in the applicability of bioaerogels, like combining constructed wetlands with use of bioaerogels, among others have been discussed. In this review, emphasis has been given on production of bioaerogels, with an aim to underscore the potential of valorization of biomass waste to develop novel materials for wastewater treatment in an effort towards creating a circular and green economy.

3-D porous cellulose nanofibril aerogels with a controllable copper nanoparticle loading as a highly efficient non-noble-metal catalyst for 4-nitrophenol reduction

Nitrophenols(NPs) are highly toxic compounds that occur in various industrial effluents. Herein, we investigated Cu nanoparticle-loaded cellulose nanofibril (CNF/PEI-Cu) aerogels as a catalyst for degrading 4-nitrophenol (4NP) in the wastewater. Non-noble metal based low-cost catalyst material and easily scalable preparation method make CNF/PEI-Cu aerogel as an appropriate catalyst for practical application in 4NP wastewater treatment. Our strategy to improve the loading amount of homogeneously distributed Cu nanoparticles was to functionalize a CNF aerogel using polyethylene imine (PEI), which can bind Cu²⁺ ions. Porous CNF aerogels with homogenously distributed 20-40 nm Cu nanoparticles were obtained by adsorbing Cu²⁺ ions and chemically reducing them to Cu metal. The FTIR, XRD, SEM, XPS and ICP-OES analysis were used to confirm the in-situ formation of Cu nanoparticles. In the presence of the CNF/PEI-Cu aerogels, 4NP was effectively reduced to 4-aminophenol (4AP) without loss of the Cu nanoparticles. The activation energy (E_a) and reaction rate constant (k_app) of the catalytic 4NP reduction reaction by the CNF/PEI2-Cu aerogels were calculated to be E_a = 39.56 kJ mol^-1 and k_app = 0.770 min^-1, respectively. The E_a is similar or even smaller than the E_a values of the corresponding reactions involving noble-metal catalysts, demonstrating that the CNF/PEI-Cu aerogels developed in the present study have strong potential as practical and economical catalysts.

Separation of Chromium (VI), Copper and Zinc: Chemistry of Transport of Metal Ions across Supported Liquid Membrane

Prior to applying supported liquid membranes (SLM) with strip dispersion for separation of chromium (VI), copper and zinc, suitable chemical settings were determined through solvent extraction and stripping studies. More than 90% of copper and zinc could be simultaneously extracted with at least 3% (v/v) di-(2-ethylhexyl)phosphoric acid (D2EHPA) at a feed equilibrium pH in the range of 3.5–5.0. For stripping, theoretical model equations derived and experimental results revealed that suitable concentrations of lower acid strength reagents can strip metals that have weaker metal-extractant bond without significantly stripping metals that have a stronger metal-extractant bond. Therefore, in a setup comprising three compartments separated by two SLM, we propose to fill the three compartments in the following order: feed—strip dispersion containing low acid strength reagent—strong acid. An organic phase with 4% (v/v) D2EHPA was used. From stripping experiments, 0.2 mol/L pH 3 citrate buffer, which resulted in the highest copper recovery (88.8%) and solution purity (99.0%), was employed as the low acid strength reagent while the strong acid consisted of 1 mol/L sulfuric acid. In 26 h, 99.1% copper was recovered by citrate buffer with 99.8% purity and 95.1% zinc was recovered by sulfuric acid with 98.4% purity. Chromium (VI), copper and zinc could be separated effectively using this separation strategy.

Enhanced adsorption of copper ions from aqueous solution by two-step DTPA-modified magnetic cellulose hydrogel beads

Copper contamination of water is one of the most pressing environmental problems which has attracted extensive concern in recent decades. In this study, a series of magnetic adsorbents were synthesized by two-step modified cellulose with N-[3-(trimethoxysilyl)propyl]ethylenediamine (KH-792) and diethylenetriaminepentaacetic acid (DTPA) using for removal of Cu(II) from aqueous solutions. Adsorption performance of Cu(II) was systematically investigated under various treatment conditions as the effect of solution pH, contact time, initial concentration and temperature. The adsorption process was found to match better with the pseudo-second-order kinetics model, and the equilibrium adsorption data were well described by Langmuir model, which meant predominant governance of monolayer chemical adsorption. The analysis of FTIR and XPS confirmed the possible adsorption mechanism between Cu(II) and the synthesized adsorbents was electrostatic attraction and the chemical coordination. Compared with MCCs and APMC, DPMC showed higher adsorption capacity of Cu(II), reaching maximum adsorption capacity of 298.62 mg·g^-1 at pH 6. Given this, ease of preparation, low cost and excellent reusability, DPMC will be promising adsorbent for application in Cu(II) removal from wastewater.

A review on three-dimensional cellulose-based aerogels for the removal of heavy metals from water

Contamination of the aquatic ecosystem by heavy metals is a growing concern that has yet to be addressed with an efficient, cost-effective and environmentally-friendly solution. Heavy metals occur naturally in the earth's crust and also result from anthropogenic activities. Due to the rapid increase in industrialization, there is an increase in consumer demands across various industries such as metal processing, mining sector, agricultural activities, etc. and this has led to an increase in heavy metal concentrations in the aqueous environment. Cellulose-based aerogels are a novel third-generation of aerogels that have recently attracted a lot of attention due to their high adsorption efficiency, eco-friendly prospects and cost effectiveness. In this review, recent literature on cellulose-based aerogel adsorbents used for the removal of heavy metals from aqueous solution has been compiled. The preparation of cellulose-based aerogels, adsorption mechanisms, effects of experimental factors such as pH, temperature, contact time, initial metal concentration and adsorbent dose have been discussed. In addition, cost analysis of cellulose-based adsorbents and some challenges in this research field along with recommendations of improvements have been presented. It can be concluded that functionalizing of cellulose-based aerogels with amine groups, thiol groups, other compounds such as nanobentonite and chitosan results in very high adsorption capacities. The adsorption studies revealed that pseudo-second-order kinetic model was the most commonly encountered adsorption kinetic model, and the most commonly encountered adsorption isotherm model was the Langmuir isotherm model. The main adsorption mechanisms were electrostatic interaction, complexation and ion exchange.

Sunlight promoted removal of toxic hexavalent chromium by cellulose derived photoactive carbon dots

A scalable synthetic procedure for fabricating photoactive carbon dots (CD) from microcrystalline cellulose (MCC) is presented. The MCC was transformed into a photoactive nanosized CD by a one-step acid-assisted thermal-carbonization (~90 °C for 30 min). The efficiency of the obtained CD was determined by photo-removal of toxic hexavalent chromium (Cr(VI)) ions from wastewater. CD obtained from cellulose completely removed 20 ppm of Cr(VI) wastewater within ∼120 min under sunlight illumination. No Cr(VI) removal was observed in dark conditions and with control cellulose material as reference samples. The Cr(VI) removal follows pseudo-first-order kinetics along with a half-life of ∼26 min. Furthermore, the Cr(VI) removal from wastewater was supported via cyclic voltammetry analysis. Using a low-cost, naturally available cellulose material and sulfuric acid, the world's most-used chemical, creates techno-economic prerequisites for a scalable process of photoactive carbon dots.

Modified cellulose nanofibril aerogel: Tunable catalyst support for treatment of 4-Nitrophenol from wastewater

4-Nitrophenol (4-NP) is a hazardous aromatic compound widely used for various industries. Catalytic reduction of 4-NP using metal nanoparticles (NPs) is a highly effective method to treat 4-NP from waste effluent. Even though lots of methods have investigated to prepare efficient metal NPs composites, the nano and/or micro size of composites makes it hard to recover after wastewater treatment, limiting its practical use. Here, we fabricate 3-dimensional polyethylene imine grafted cellulose nanofibril (CNF-PEI) aerogel as a porous support material for platinum (Pt) NPs to practically and effectively treat 4-NP from wastewater. The Pt NPs are formed in-situ mode on cylindrical CNF-PEI aerogel by adsorption reaction with amine groups of PEI and subsequently reduction with NaBH₄. Control of PEI grafting density and the initial concentration of Pt ions allows manipulation of the loading mass, size, and distribution of Pt NPs on 3D scaffold of CNF-PEI aerogel. The composite aerogel shows high catalytic activity for conversion of 4-NP. The 4-NP conversion activity is strongly affected by the size of Pt NPs and effective surface area of aerogels. The 2.74 nm size Pt NPs with even distribution in the aerogel show fast reaction kinetics (k = 0.12 min^-1). Finally, 4-NP reduction efficiency does not decrease during 5 times reuse cycle of Pt NPs loaded CNF-PEI aerogel. This CNF-PEI aerogel loaded with Pt NPs is recovered easily from wastewater after treatment, so it is reusable and offers high potential as a practical recyclable environmental catalyst.

Synthesis of Copper Nanoparticles from Cu2+-Spiked Wastewater via Adsorptive Separation and Subsequent Chemical Reduction

Copper in ionic form (Cu²⁺) should be removed from wastewater because of its harmful effects on human health. Meanwhile, Cu-metal nanoparticles (Cu⁰ NPs) are widely used in various applications such as catalysts, optical materials, sensors, and antibacterial agents. Here, we demonstrated the recovery of Cu²⁺ from wastewater and its subsequent transformation into Cu⁰ NPs, a value-added product, via continuous adsorption followed by chemical reduction by hydrazine. To separate and enrich Cu²⁺ from wastewater, a biosorbent that exhibits excellent selectivity and adsorption capacity toward Cu²⁺, i.e., polyethyleneimine-grafted cellulose nanofibril aerogel (PEI@CNF), was packed into a column and used to treat 20 mg/L Cu²⁺ wastewater at a flow rate of 5 mL/min. The Cu²⁺ adsorption reached equilibrium at 72 h, and the Cu²⁺-saturated column was eluted using 0.1 M of HCl. After five consecutive elutions of Cu²⁺ from the adsorbent column, a Cu²⁺-enriched solution with a concentration of 3212 mg/L was obtained. The recovered Cu²⁺ concentrate was chemically reduced to obtain Cu⁰ NPs by reaction with hydrazine as a reductant in the presence of sodium dodecyl sulfate (SDS) as a stabilizer. The solution pH and hydrazine/Cu²⁺ ratio strongly affected the reduction efficiency of Cu²⁺ ions. When 0.1 M of SDS was used, spherical 50–100 nm Cu⁰ NPs were obtained. The results demonstrate that Cu²⁺-spiked wastewater can be converted into Cu⁰ NPs as a value-added product via adsorption followed by chemical reduction.