Application of pinewood waste-derived biochar for the removal of nitrate and phosphate from single and binary solutions

Coconut shell-based biochars produced by an innovative thermochemical process for obtaining improved lignocellulose-based adsorbents

The urgent need for a simple and cost-effective thermochemical process to produce biochar has prompted this study. The aim was to develop a straightforward thermochemical process under O2-limited conditions for the production of coconut-based biochar (CBB) and to assess its ability to remove methylene blue (MB) through adsorption, comparing it with CBB produced by slow pyrolysis. CBBs were obtained under different atmospheric conditions (O2-limited, muffle furnace biochar (MFB); and inert, pyrolytic reactor biochar (PRB)), at 350, 500, and 700 °C, and for 30 and 90'. MFB and PRB were characterized using FTIR, RAMAN, SEM, EDS, and XRD analyses. Adsorption tests were conducted using 1.0 g L-1 of MFB and PRB, 10 mg L-1 of MB at 25 °C for 48 h. Characterization revealed that atmospheric conditions significantly influenced the yield and structural features of the materials. PRB exhibited higher yields and larger cavities than MFB, but quite similar spectral features. Adsorption tests indicated that MFB and PRB had qt values of 33.1 and 9.2 mg g-1, respectively, which were obtained at 700 °C and 90', and 700 °C and 30', respectively. This alternative method produced an innovative and promising lignocellulose-based material with great potential to be used as a biosorbent.

Perovskite Oxides: Syntheses and Perspectives on Their Application for Nitrate Reduction

Over the decades, the rise in nitrate levels in the ecosystem has posed a serious threat to the continuous existence of humans, fauna, and flora. The deleterious effects of increasing levels of nitrates in the ecosystem have led to adverse health and environmental implications in the form of methemoglobinemia and eutrophication, respectively. Different pathways/routes for the syntheses of perovskites and their oxides were presented in this review. In recent times, electrocatalytic reduction has emerged as the most utilized technique for the conversion of nitrates into ammonia, an industrial feedstock. According to published papers, the efficiency of various perovskites and their oxides used for the electrocatalytic reduction of nitrate achieved a high Faradaic efficiency of 98%. Furthermore, studies published have shown that there is a need to improve the chemical stability of perovskites and their oxides during scale-up applications, as well as their scalability for industrial applications.

Sustainable adsorbent frameworks based on bio-resourced materials and biodegradable polymers in selective phosphate removal for waste-water remediation

Phosphorus to an optimum extent is an essential nutrient for all living organisms and its scarcity may cause food security, and environmental preservation issues vis-à-vis agroeconomic hurdles. Undesirably excess phosphorus intensifies the eutrophication problem in non-marine water bodies and disrupts the natural nutrient balance of the ecosystem. To overcome such dichotomy, biodegradable polymer-based adsorbents have emerged as a cost-effective and implementable approach in striking a "desired optimum-undesired excess" balance pertaining to phosphate in a sustainable manner. So far, the reports on adopting such adsorbent-approach for wastewater remediation remained largely scattered, unstructured, and poorly correlated. In this background, the contextual review comprehensively discusses the current state-of-the-art in utilizing biodegradable polymeric frameworks as an adsorbent system for phosphate removal and its efficient recovery from the aquatic ecosystem, while highlighting their characteristics-specific functional efficiency vis-à-vis easiness of synthetic and commercial viability. The overview further delves into the sources and environmental ramifications of excessive phosphorus in water bodies and associated mechanistic pathways of phosphorus removal via adsorption, precipitation, and membrane filtration enabled by biodegradable (natural and synthetic) polymeric substrates. Finally, functionality optimization, degradability tuning, and adsorption selectivity of biodegradable polymers are highlighted, while aiming to strike a balance in "removal-recovery-reuse" dynamics of phosphate. Thus, the current review not only paves the way for future exploration of biodegradable polymers in sustainable cost-effective adsorbents for phosphorus removal but also can serve as a guide for researchers dealing with this critical issue.

Potential use of Ulva intestinalis-derived biochar adsorbing phosphate ions in the cultivation of winter wheat Tristicum aestivum

In this work, the properties of biochar produced from green macroalga Ulva intestinalis by pyrolysis were studied at temperatures of 300, 500, and 700 °C. This biochar was characterized in terms of multielemental composition, BET surface area, total pore volume, and biosorption properties toward phosphate ions. Biochar produced at 700 °C-25 m2/g had the highest surface area. The kinetics and isotherms of sorption processes of phosphate ions as sorbate by these sorbents were investigated. Modified biochar was able to remove 84.3% of phosphate ions from wastewater, whereas non-modified biochar-only 40.6%. Hence, biochar enriched with phosphate ions can serve as a valuable soil amendment. Pot experiments performed on winter wheat (Triticum aestivum) with a 3% addition of dry Ulva intestinalis, pristine biochar, and Mg-modified biochar enriched with phosphate ions showed that these amendments stimulated plant growth (length and fresh weight of plants) as well as enlarging the chlorophyll content in leaves. Our results indicate that the production of biochar (pristine and Mg-impregnated) is a sustainable option to valorize the biomass of seaweeds, and to recycle phosphorus from wastewater.

Iron-coated nutshell waste bioadsorbents: Synthesis, phosphate remediation, and subsequent fertilizer application

The increasing incidence of freshwater nutrient pollution worldwide has highlighted the need for improved phosphate capture technologies. Successful phosphate recovery from agricultural sources and commercial wastewater can help prevent freshwater algal bloom contamination, while also reducing the dependency on finite phosphate reserves. Biodegradable biosorbents have the potential to remove phosphate from water; however, their potential as slow-release fertilizers has not been tested. Novel biosorbents were developed by coating pistachio and walnut shells with iron oxides; batch and column experiments were conducted to investigate their adsorption capacities and performances. Surface characterization studies were also conducted to investigate changes in the surface area and morphology. The potential of using iron-coated shells loaded with phosphorus as slow-release fertilizers was also evaluated. Advanced characterization techniques (scanning electron microscopy, Brunauer-Emmett-Teller (BET) physisorption analysis, and x-ray diffraction) showed that hematite was successfully coated onto the surface, resulting in increased surface area and roughness. The iron-coated pistachio and walnut shell phosphate removal capacity was 12.63 mg g-1 and 9.25 mg g-1, respectively. The phosphate sorption data fitted well with the Freundlich isotherm model and pseudo-second-order kinetics. Inner sphere complex formation, coprecipitation, diffusion, and electrostatic attraction were the main uptake mechanisms. Results from sequential release experiments with simulated pore water suggested both fast and slow desorption components. The Mehlich-3 extraction revealed that more than 90% of the released phosphate was available for plant uptake. In addition, nutrient priming showed that corn seed shoot growth increased by more than 43% when pretreated with phosphate-loaded biosorbents, demonstrating that the released phosphate could be used for plant growth. This research provides a pathway for two important zero-waste, cyclical economic goals: (1) the beneficial use of agricultural waste, and (2) a low-cost technology that can recover phosphorus from waste streams while potentially adding an additional unconventional phosphate source to apatite mineral ores.

Nitrate-Nitrogen Adsorption Characteristics and Mechanisms of Various Garden Waste Biochars

Nitrate-nitrogen (NO3--N) removal and garden waste disposal are critical concerns in urban environmental protection. In this study, biochars were produced by pyrolyzing various garden waste materials, including grass clippings (GC), Rosa chinensis Jacq. branches (RC), Prunus persica branches (PP), Armeniaca vulgaris Lam. branches (AV), Morus alba Linn. sp. branches (MA), Platycladus orientalis (L.) Franco branches (PO), Pinus tabuliformis Carrière branches (PT), and Sophorajaponica Linn. branches (SL) at three different temperatures (300 °C, 500 °C, and 700 °C). These biochars, labeled as GC300, GC500, GC700, and so on., were then used to adsorb NO3--N under various conditions, such as initial pH value, contact time, initial NO3--N concentration, and biochar dosage. Kinetic data were analyzed by pseudo-first-order and pseudo-second-order kinetic models. The equilibrium adsorption data were evaluated by Langmuir, Freundlich, Temkin and Dubinin-Radushkevich models. The results revealed that the biochar yields varied between 14.43% (PT700) and 47.09% (AV300) and were significantly influenced by the type of garden waste and decreased with increasing pyrolysis temperature, while the pH and ash content showed an opposite trend (p < 0.05). The efficiency of NO3--N removal was significantly influenced by the type of feedstock, preparation process, and adsorption conditions. Higher pH values had a negative influence on NO3--N adsorption, while longer contact time, higher initial concentration of NO3--N, and increased biochar dosage positively affected NO3--N adsorption. Most of the kinetic data were better fitted to the pseudo-second-order kinetic model (0.998 > R2 > 0.927). Positive b values obtained from the Temkin model indicated an exothermic process of NO3--N adsorption. The Langmuir model provided better fits for more equilibrium adsorption data than the Freundlich model, with the maximum NO3--N removal efficiency (62.11%) and adsorption capacity (1.339 mg·g-1) in PO700 under the conditions of pH = 2, biochar dosage = 50 mg·L-1, and a reaction time of 24 h. The outcomes of this study contribute valuable insights into garden waste disposal and NO3--N removal from wastewater, providing a theoretical basis for sustainable environmental management practices.

Migration electric-field assisted electrocoagulation with sponge biochar capacitive electrode for advanced wastewater phosphorus removal

Migrating electric field-assisted electrocoagulation (MEAEC) is a three-electrode electrochemical system, including waste flour-derived sponge biochar (SBC) as an adsorption electrode for efficient phosphorus removal from wastewater. The SBC was applied in the MEAEC system as a pseudo capacitance electrode with low energy consumption and reached an excellent effluent level (0.12 mg/L) with a 200-s treatment time in 1 mg/L phosphate synthetic wastewater. The SBC adsorption electrode had a total charge capacitance of 1.14 F/g with abundant micropores. Continuous charging and discharging at a constant voltage over 100 cycles demonstrated the excellent durability of the biochar electrodes. The energy demand of SBC-MEAEC was only 0.0058 kWh/m³ for 90% phosphate removal, which was 65% less than that of the control. The use of SBC in the MEAEC system greatly enhanced phosphate removal at low concentrations. In the SBC-MEAEC system, the electro-desorption synchronous electrocoagulation process demonstrated efficient concentration and release of ions after electro-adsorption. These results indicate that MEAEC with an SBC electrode could achieve a high level of phosphate removal with a much lower energy consumption than in previous studies. The recovered concentrated phosphorus flocs also contained fewer metal impurities than those in previous electrochemical approaches. The proposed desorption synchronous electrocoagulation utilizing waste-derived SBC electrodes provides a cost-effective pathway to treat low phosphorous-containing wastewater.

The potential of polyethylene microplastics to transport copper in aquatic systems: Adsorption and desorption studies

Heavy metals and microplastics are two types of general contaminants that can cause significant damage to water systems and organisms. However, the interaction of heavy metal ions with microplastic in aquatic systems received less attention compared with that of organic contaminants. This study aims to explore the interaction of copper (II) ions with microplastic (polyethylene) in aquatic systems. The adsorption experiments were performed by varying several operational parameters including equilibrium pH, initial Cu (II) concentrations, and contact times. The microplastic was characterized using X-ray diffraction, scanning electron microscopy, and Fourier transform infrared. The results confirmed the porous nature of the microplastic surface and the existence of various binding sites. The maximum Cu (II) uptake by microplastic was recorded as 1.23 mg/g at pH 5, according to the Langmuir adsorption isotherm. The experimental isotherm data exhibited a good fit to the Toth model, followed by the Langmuir and Freundlich equations, according to the correlation coefficient and %error values. The pseudo-first kinetics equation showed a better fit to copper (II) kinetics data compared with the pseudo-second kinetics equation. Elution of copper (II) ions from copper (II)-loaded microplastic was attempted using several elutants, and the results indicated that 0.01 M HNO₃ performed well with elution efficiency over 99.5%. Thus, the elution experiments furnished proof that Cu-loaded microplastic may leach Cu (II) ions under rich acidic conditions, thereby aiding the transport of Cu (II) ions into the digestive tracts of aquatic organisms. PRACTITIONER POINTS: Polyethylene microplastics showed potential to sorb copper ions. The mechanism was electrostatic interaction between microplastics and metal ions. Maximum copper adsorption by microplastic was recorded as 1.23 mg/g. Once desorbed, Cu(II) transferred into the digestive tracts of aquatic organisms.

Biochars and activated carbons as adsorbents of inorganic and organic compounds from multicomponent systems - A review

Biochars are obtained by biomass pyrolysis, whereas activated carbon is a biochar that has undergone chemical or physical activation. Owing to the large surface area and easy surface modification both solids are widely applied as adsorbents. They are low-costs materials, they could be regenerated and their disposal is not troublesome. Adsorption of heavy metals, dyes, pharmaceuticals on the surface of biochars and activated carbons, from simple systems of adsorbate containing only one compound, are described extensively in the literature. The present paper provides an overview of reports on adsorption of inorganic and organic compounds onto these two types of adsorbents from the mixed adsorbate systems. The described adsorbate systems have been divided into those consisting of: two or more inorganic ions, two or more organic compounds and both of them (inorganic and organic ones). The research of this type is carried out much less frequently due to the more complicated description of interactions in the mixed adsorbate systems.

Efficient Nitrate Adsorption from Groundwater by Biochar-Supported Al-Substituted Goethite

Groundwater nitrate contamination is challenging and requires efficient solutions for nitrate removal. This study aims to investigate nitrate removal using a novel adsorbent, biochar-supported aluminum-substituted goethite (BAG). The results showed that an increase in the initial Al/(Al + Fe) atomic ratio for BAGs from 0 to 20% decreased the specific surface area from 115.2 to 75.7 m2/g, but enhanced the surface charge density from 0.0180 to 0.0843 C/m2. By comparison, 10% of Al/(Al + Fe) led to the optimal adsorbent for nitrate removal. The adsorbent’s adsorption capacity was effective with a wide pH range (4–8), and decreased with increasing ionic strength. The descending order of nitrate adsorption inhibition by co-existing anions was SO42−, HCO3−, PO43−, and Cl−. The adsorption kinetics and isotherms agreed well with the pseudo-first-order equation and Langmuir model, respectively. The theoretical maximum adsorption capacity was 96.1469 mg/g. Thermodynamic analysis showed that the nitrate adsorption was spontaneous and endothermic. After 10-cycle regeneration, the BAG still kept 92.6% of its original adsorption capacity for synthetic nitrate-contaminated groundwater. Moreover, the main adsorption mechanism was attributed to electrostatic attraction due to the enhancement of surface charge density by Al substitution. Accordingly, the BAG adsorbent is a potential solution to remove nitrate from groundwater.

Feasible synthesis of a novel and low-cost seawater-modified biochar and its potential application in phosphate removal/recovery from wastewater

In this study, a novel and low-cost seawater-modified biochar (SBC) was fabricated via the pyrolysis of fir wood waste followed by co-precipitation modification using seawater as the Ca/Mg source. The co-precipitation pH was a vital factor during modification, and the optimal pH was 10.50 according to calculations using PHREEQC 2.5 and experiments. The characterizations indicated that Ca and Mg were loaded on the SBC as irregular CaCO₃ and nanoflake-like Mg(OH)₂, respectively, with the latter dominating. The SBC exhibited a high maximum adsorption capacity of 181.07 mg/g for phosphate, calculated using the Langmuir model, excellent adsorption performance under acidic and neutral conditions (pH = 3.00-7.00), and remarkable selectivity against Cl^-, NO₃^-, and SO₄^2-. The presence of HCO₃^- promoted adsorption. The mechanisms behind phosphate adsorption involved electrostatic attraction, ligand exchange, precipitation, and inner-sphere complexation. Mg, rather than Ca, was served as the main adsorptive sites for phosphate. Additionally, the feasibility of treating real-world wastewater was tested in batch (using SBC powders) and fixed-bed column (using SBC granules) experiments. The results indicate that the SBC powders could reduce the phosphate concentration from 1.26 mg P/L to below 0.5 mg P/L at a low dose of 0.50 g/L, and the SBC granules exhibited a high removal efficiency with excellent recyclability; the capacity still remained at 78.92% of the initial capacity after five adsorption-desorption runs. Furthermore, the modification process almost did not increase the production cost of the SBC, which was estimated to be 0.41 $/kg. Our results demonstrate that seawater is a low-cost and efficient modifier for biochar modification, and the resultant SBC demonstrates great potential for treating actual phosphate-containing wastewater.

Recent advances in waste-derived functional materials for wastewater remediation

Water pollution is a major concern for public health and a sustainable future. It is urgent to purify wastewater with effective methods to ensure a clean water supply. Most wastewater remediation techniques rely heavily on functional materials, and cost-effective materials are thus highly favorable. Of great environmental and economic significance, developing waste-derived materials for wastewater remediation has undergone explosive growth recently. Herein, the applications of waste (e.g., biowastes, electronic wastes, and industrial wastes)-derived materials for wastewater purification are comprehensively reviewed. Sophisticated strategies for turning wastes into functional materials are firstly summarized, including pyrolysis and combustion, hydrothermal synthesis, sol-gel method, co-precipitation, and ball milling. Moreover, critical experimental parameters within different design strategies are discussed. Afterward, recent applications of waste-derived functional materials in adsorption, photocatalytic degradation, electrochemical treatment, and advanced oxidation processes (AOPs) are analyzed. We mainly focus on the development of efficient functional materials via regulating the internal and external characteristics of waste-derived materials, and the material's property-performance correlation is also emphasized. Finally, the key future perspectives in the field of waste-derived materials-driven water remediation are highlighted.

Boosting photocatalytic reduction of nitrate to ammonia enabled by perovskite/biochar nanocomposites with oxygen defects and O-containing functional groups

Photocatalytic ammonia synthesis from waste nitrate has emerged as a promising strategy in water treatment; however, the conversion and selectivity still remain a great challenge. Herein, recyclable magnetic perovskite (LaFeO₃)/biochar nanocomposites were successfully synthesized by the co-pyrolysis of the lotus biomass and Fe/La salts without extra organic complexants. Results showed that the lotus interacted with the iron ions (Fe³⁺) and the lanthanum ions (La³⁺) changing the surface and structural characteristics of catalysts. Oxygen defects of LaFeO₃ were enhanced due to biomass introduction, which accelerated the separation of electron-hole pairs. On the other hand, Fe/La salts participated in the modification process of the biochar surface during the carbonization, which promoted the exposure of oxygen-containing functional groups and aromatic structures facilitating the nitrate adsorption. Notably, the redox-active quinone/phenol groups on the biochar surface contributed to the photogenerated electrons exchange favoring the ammonium ion (NH₄⁺) selectivity as direct electron donor. Nitrate conversion reached 98% and ammonia selectivity reached 97% over the LaFeO₃/biochar photocatalyst under visible light irradiation, when the mass ratio of lotus and Fe/La salts was optimized. Our findings may potentially provide a green and cost-effective way for ammonia recovery from nitrate contaminants.

Recent advancements on biochars enrichment with ammonium and nitrates from wastewaters: A critical review on benefits for environment and agriculture

During the last decade, biochars have been considered as attractive and eco-friendly materials with various applications including wastewater treatment, energy production and soil amendments. However, the important nitrogen losses during biochars production using the pyrolysis process have limited their potential use in agriculture as biofertilizer. Therefore, it seems necessary to enrich these biochars with nitrogen sources before their use in agricultural soils. This paper is the first comprehensive review on the assessment of biomass type and the biochars' properties effects on N recovery efficiency from aqueous solutions as well as its release and availability for plants when applying the N-enriched chars in soils. In particular, the N recovery efficiency by raw biochars versus the type of the raw feedstock is summarized. Then, correlations between the adsorption performance and the main physico-chemical properties are established. The main mechanisms involved during ammonium (NH₄-N) and nitrates (NO₃-N) recovery process are thoroughly discussed. A special attention is given to the assessment of the biochars physico-chemical modification impact on their N recovery capacities improvement. After that, the application of these N-enriched biochars in agriculture and their impacts on plants growth as well as methane and nitrous oxide greenhouse gas emissions reduction are also discussed. Finally, the main future development and challenges of biochars enrichment with N from wastewaters and their valorization as biofertilizers for plants growth and greenhouse gas (GHG) emissions reduction are provided. This systematic review is intended to promote the real application of biochars for nutrients recovery from wastewaters and their reuse as eco-friendly fertilizers.