Microplastic pollution in inshore and offshore surface waters of the southern Caspian Sea

Effects of microplastics on typical macrobenthos in sargassum ecosystems

Recently, microplastics (MPs) have attracted extensive attention to their wide distribution and potential toxicity in ecosystems. However, there was a lack of research focused on MPs in seaweed bed ecosystems. This study investigated the distribution and toxicity of MPs in macrobenthos in Sargassum ecosystem. According to the in-situ investigation results, the abundance of MPs in the sediment was 0.9-2.3 items/g, the indoor microcosmic experiment was constructed. After exposure to MPs (0, 2, and 20 items/g) for 30 days, the abundance of MPs in macrobenthos exhibits a concentration-dependent increase. However, there was no significant bioaccumulation of MPs at the trophic level. The indoor toxicity test revealed that MPs induced oxidative stress and altered intestinal microflora composition in macrobenthos, even at actual environmental concentrations (2 items/g). It may result in a perturbation of the organism's homeostatic equilibrium. High-concentration (20 items/g) MPs had a greater impact on alkaline phosphatase (AKP) in Mollusks. The increase in AKP activity could be indicative of an adaptive mechanism in some macrobenthos while the decline in AKP activity might signal a decrease in their survival. These results elucidated the fate of MPs in ecosystem and the ecological risks of MPs to large benthic animals on model environmental conditions.

Mitigating microplastic pollution: A critical review on the effects, remediation, and utilization strategies of microplastics

Microplastics are found ubiquitous in the natural environment and are an increasing source of worry for global health. Rapid industrialization and inappropriate plastic waste management in our daily lives have resulted in an increase in the amount of microplastics in the ecosystem. Microplastics that are <150 μm in size could be easily ingested by living beings and cause considerable toxicity. Microplastics can aggregate in living organisms and cause acute, chronic, carcinogenic, developmental, and genotoxic damage. As a result, a sustainable approach to reducing, reusing, and recycling plastic waste is required to manage microplastic pollution in the environment. However, there is still a significant lack of effective methods for managing these pollutants. As a result, the purpose of this review is to convey information on microplastic toxicity and management practices that may aid in the reduction of microplastic pollution. This review further insights on how plastic trash could be converted as value-added products, reducing the load of accumulating plastic wastes in the environment, and leading to a beneficial endeavor for humanity.

Analysis of microplastics in ships ballast water and its ecological risk assessment studies from the Persian Gulf

Transport of ballast water is considered a significant vector for dispersion of different pollutants, including microplastics (MPs), throughout the world's oceans. However, there is limited information on MPs in ballast water. Size distribution, polymer type, and ecological risks of MPs in ballast water were investigated for the first time in this study. The mean levels of MPs in ballast water and seawater samples were 12.53 and 11.80 items/L, respectively. MPs with a size category of 50-300 μm was the most abundant. Fiber, black, and polycarbonate (PC) were the predominant shape, color, and polymer type of identified MPs in ballast water and seawater, respectively. The pollution load index (PLI), hazard index (HI), and risk quotient (RQ) indicated high levels of MP pollution, potentially indicating an ecological risk. These findings increase our understanding of the major sources (such as ballast water), transportation routes, and related ecological risks of MPs to marine ecosystems.

Are fishes selecting the trash they eat? Influence of feeding mode and habitat on microplastic uptake in an artificial reef complex (ARC)

Every year, coastal countries generate ∼275 million tons of plastic, and the oceans receive from 4.8 to 12.7 million tons3. Pollution by synthetic polymers is even more problematic for the environment when this material is fragmented into small portions, forming microplastics (MPs). In the present study, we analyze the selection of MPs by the ichthyofauna based on the availability of the morphotypes and polymeric composition of microplastic in the environment and compare the amount of MP in surface water, water column, sediments and fish in different organs, trophic categories, habitats and areas with and without artificial reefs. In order to achieve this goal, the shape, color, abundance and chemical composition of MPs in the digestive tract and gills of 18 fish species in artificial reefs area and control area, were evaluated. A total of 216 fish were analyzed, and 149 (60 %) had MPs in at least one organ and showed a mean concentration of 1.55 ± 3.31 MPs/g. Of the 18 fish species collected in the reef complex area, 17 (94 %) included individuals with at least one MP in digestive tract or gills. Four species showed the higher selectivity of MP types, colors, and polymers. More MPs were found in the fish, surface water, water column and sediment in the artificial reef area compared to the control areas. This is the first evidence of MP selection by commercially important fish species in artificial marine structures worldwide. These results provide useful information on MP pollution in RAs and highlight yet another issue that must be considered in the management of fisheries resources in the region and in other reef complexes around the world.

Microplastic Pollution in the Gastrointestinal Tract and Gills of Some Teleost and Sturgeon Fish from the Caspian Sea, Northern Iran

The increasing microplastic pollution in the marine environment has raised global concern. The main risk of microplastics in aquatic ecosystem is their bioaccumulation in aquatic organisms. A few studies have reported microplastic pollution in the digestive system of Caspian Sea fish species, but there is no research on sturgeon species, nor on fish gills. We investigated the occurrence of microplastics in the gastrointestinal tract (GIT) and gills of 62 specimens belonging to four species including three teleosts (Cyprinus carpio, Rutilus kutum, and Chelon aurata) and one sturgeon (Acipenser persicus, a valuable endangered species) from the Caspian Sea between January and March 2022. Fish tissues were removed, exposed for 24 h to 10% KOH, and then dried on filter paper. Particles were observed under a stereomicroscope and analyzed by Raman microspectrometry, scanning electron microscopy, and energy-dispersive spectroscopy. A total of 91 microplastics were detected in the GIT (average of 1.46 ± 1.17 items/individual) and 63 microplastics in the gills (average of 1.01 ± 0.62 items/individual). A significant correlation was not found between the number of microplastics found in both tissues and fish body length, body weight, GIT weight, and gill weight (p > 0.05), except between microplastics isolated from gills and gill weight in C. carpio (rs  = 0.707, p = 0.022). The abundance of microplastics in fish followed the order of A. persicus > C. aurata > R. kutum > C. carpio. The microplastics were in the size range of 45 to 5000 µm, with particles of 300 to 1000 µm being the most prevalent; 74.68% of the particles were shaped like fibers, 30.53% were red, and 70.6% were composed of nylon polymer. Environ Toxicol Chem 2023;42:2453-2465. © 2023 SETAC.

Occurrence and spatial distribution of microplastics in the intertidal sediments along the Oman Sea

Microplastics (MPs) have been found in marine systems more frequently. We aim to analyze the MPs abundances, distribution, and characteristics in the intertidal sediments along the Oman Sea. Samples were collected from 7 locations with three replicates. Density separation was used to extract MPs, which were then visually counted and categorized based on their size, shape, and color. MPs abundance ranged between 219.6 ± 38.3 particles.kg-1dw and 617.3 ± 99.9 particles.kg-1dw with a mean abundance of 315.4 ± 24.4 particles.kg-1 dw. Fragments and fibers were the dominant shapes. Red and blue colors were observed in 61.6 % of the collected MPs. In addition, 100-500 μm size range of MPs were more abundant. Micro-Raman spectroscopy analysis revealed polypropylene was the major polymer constituent. The present study revealed the widespread occurrence of MPs as anthropogenic pollutants throughout the Oman Sea and highlighted the urgent need for regulations and policies to reduce the entry of this material into marine environments.

Distribution of microplastics in upstream and downstream surface waters of the Iranian rivers discharging to the southern Caspian Sea

Microplastic pollution in the riverine ecosystems has caught many attentions in the scientific literatures. However, little information is available about the abundance and distribution of microplastics of the rivers discharging to the Caspian Sea. The aim of this study was to assess the spatial and seasonal distribution of microplastics in the surface waters of thirteen rivers discharging to the southern Caspian Sea. Microplastics were found in all stations with uneven distributions. The average concentrations of microplastics in the stations during snowmelt and dry seasons were 1.406 ± 0.1380 microplastics/m3 and 0.4070 ± 0.01500 microplastics/m3, respectively. Positive gradients of the rivers microplastics concentration from upstream to downstream were found. White/transparent polyethylene (PE) particles with the shape of fragment/film and the length (L) of ≤ 1 mm were the most common microplastics in the surface waters of the rivers discharging to the southern Caspian Sea. Also, the mean concentration of microplastics in spring snowmelt and runoff period was 3.45 times higher than in dry period. Factors such as sewage and household wastes; landfills; and recreational-tourism, fishing and agricultural activities along the rivers may contribute to microplastic contamination in downstream stations. Our data provide baseline information of microplastics in surface waters of rivers discharging to the southern Caspian Sea.

Spatiotemporal trends and characteristics of microplastic contamination in a large river-dominated estuary

Microplastic (MP) pollution is a major global issue that poses serious threats to aquatic organisms. Although research on MP pollution has been extensive, the relationship between MPs and water quality parameters in estuarine water systems is unclear. This work studied the spatiotemporal distribution and characteristics of MPs in the Karnaphuli River estuary, Bangladesh. MP abundance was calculated by towing with a plankton net (300 μm mesh size) at three river gradients (up-, mid- and downstream) and the association between physicochemical parameters of water (temperature, pH, salinity, electrical conductivity, total dissolved solids, and dissolved oxygen) and MP distribution patterns was also investigated. Mean MP abundance in water was higher during the wet season (April) (4.33 ± 2.45 items per m³) compared to the dry season (September) (3.65 ± 2.54 items per m³). In descending order, the highest MP abundance was observed downstream (6.60 items per m³) > midstream (3.15 items per m³) > upstream (2.22 items per m³). pH during the wet season (April) and temperature during the dry season (September) were key physicochemical parameters that correlated with river MP abundance (r = -0.74 and 0.74 respectively). Indicating that if the Karnaphuli River water has low pH or high temperature, there is likely to be high MPs present in the water. Most MP particles were film-shaped, white in color, and 1-5 mm in size. Of the six polymers detected, polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), and cellulose were predominant, comprising roughly 17-19% each. These results can be used to model MP transport in the freshwater ecosystem of the Karnaphuli River estuary in Bangladesh to help develop future mitigation strategies.

Occurrence and distribution of microplastics in surface sediments of a typical river with a highly eroded catchment, a case of the Yan River, a tributary of the Yellow River

Investigation of microplastic contamination in riverbed sediments can help clarify long-term microplastic pollution and establish prevention measures in watersheds. However, little research has been conducted on riverbed sediment pollution on the Loess Plateau, a highly eroded area in Northwest China. This research investigates the Yan River as a case study. The occurrence and distribution of microplastics were surveyed and analyzed to explore the microplastic pollution in the riverbed of the Loess Plateau. Microplastics were found in all sediment samples, with an abundance of 208.89-686.67 items kg^-1. Polypropylene and polyethylene were the main microplastic components identified using Fourier transform infrared spectrometry and imaging systems. Particles 0.5-1.0 mm in size accounted for 38.5 % of the total microplastics in this region. The main microplastic colors were black, white, and transparent, which accounted for 40.75 %, 20.75 %, and 20.38 % of the total microplastics, respectively. There was an increasing trend in the microplastic abundance in sediments in the downstream direction that accompanied the increase in population density from 55.31 persons km^-2 upstream to 230.05 persons km^-2 downstream. Microplastic pollution was related to the complex geographical, semiarid monsoon climate, elevation, grassland, per capita GDP, and anthropogenic factors in the Yan River basin. The erodible loess and high-intensity rainstorm promoted severe soil erosion, which caused microplastics absorbed in the soil to migrate to the river. Poorly managed solid wastes, such as agricultural mulch, plastic bottles, and other plastic products are also sources of microplastics in the riverbed. This study further clarifies microplastic pollution in typical rivers of highly erosive areas and provides useful information for basin management.

Microplastic contamination in seawater across global marine protected areas boundaries

Despite the relatively rich literature on the omnipresence of microplastics in marine environments, the current status and ecological impacts of microplastics on global Marine Protected Areas (MPAs) are still unknown. Their ubiquitous occurrence, increasing volume, and ecotoxicological effects have made microplastic an emerging marine pollutant. Given the critical conservation roles of MPAs that aim to protect vulnerable marine species, biodiversity, and resources, it is essential to have a comprehensive overview of the occurrence, abundance, distribution, and characteristics of microplastics in MPAs including their buffer zones. Here, extensive data were collected and screened based on 1565 peer-reviewed literature from 2017 to 2020, and a GIS-based approach was applied to improve the outcomes by considering boundary limits. Microplastics in seawater samples were verified within the boundaries of 52 MPAs; after including the buffer zones, 1/3 more (68 MPAs) were identified as contaminated by microplastics. A large range of microplastic levels in MPAs was summarized based on water volume (0-809,000 items/m³) or surface water area (21.3-1,650,000,000 items/km²), which was likely due to discrepancy in sampling and analytical methods. Fragment was the most frequently observed shape and fiber was the most abundant shape. PE and PP were the most common and also most abundant polymer types. Overall, 2/3 of available data reported that seawater microplastic levels in MPAs were higher than 12,429 items/km², indicating that global MPAs alone cannot protect against microplastic pollution. The current limitations and future directions were also discussed toward the post-2020 Global Biodiversity Framework goals.

Characterization of microplastics in the septic tank via laser direct infrared spectroscopy

Microplastics (MPs) are emerging pollutants that have been widely detected in the atmosphere, hydrosphere, lithosphere, and biosphere. Such wide spread of MPs indicates that the effective control in different environmental sectors is in an urgent need, and the first step in meeting this need is to identify the occurrence of MPs in the relevant environment. However, research on MPs in septic tanks has not been reported so far. This study investigated the distribution characteristics of MPs in septic tanks with a size detection limit of as low as 20 μm detected by laser direct infrared spectroscopy. Results showed that the number of MPs in the septic tank was reached 2803 (1489-4816) particles/g dry sludge, and the amount detected in the sediments was one order of magnitude higher than that in the scums. A total of 36 types of MPs were found in the septic tank, and 26 types were found in both sediments and scums, but the type in the scums was 21% higher than that in the sediments. The size was mostly 20-100 μm, accounting for 86.3% and 91.2% in the sediments and scums, respectively. Four shapes of MPs were detected in the septic tank, namely, fiber, bead, granule, and fragment. Our study revealed that septic tanks are both sinks and sources of MPs, which are reflected in the fact that MPs are not only large in number but also abundant in types. Thus, significant attention should be paid to septic tank-based microplastic pollution, which may lead to environmental and health risks without proper control and management.

Microplastics as Contaminants in Water Bodies and Their Threat to the Aquatic Animals: A Mini-Review

Microplastics (MPs), which are particles with a diameter of less than 5 mm, have been extensively studied due to their serious global pollution. Typically, MPs in water originate from terrestrial input. A number of studies have reported the presence of MPs as a stressor in water environments worldwide, and their potential threat to the aquatic animals, affecting the growth, oxidative stress responses, body composition, histopathology, intestinal flora, and immune and reproduction systems. During the plastic degradation process, a large variety of toxic substances are released. MPs have been proposed to be the carriers of toxic chemicals and harmful microorganisms. A study of the literature on MP pollution and stress on the aquatic animals associated with MPs was carried out.

A case study of distribution and characteristics of microplastics in surface water and sediments of the seas around Shenzhen, southern coastal area of China

Microplastics (MPs), known to cause environmental pollution, is attracting a growing attention worldwide owing to their extensive existence and potential risks to biota. The marginal sea areas are suspected to be especially susceptible to MPs pollution. Unfortunately, data on MPs in the surface water and sediments ecosystems are still limited, particularly in the southern coastal areas of China. The study was successfully utilized to explore the distribution and characteristics of MPs below 5 mm collected from 14 sites in the seas around Shenzhen, a typical special economic zone of China. MPs were detected in both surface water and sediments with concentrations ranging from 3.8 to 7.8 items per liter and 2.6 × 10³ to 10.0 × 10³ items per kilogram, respectively. The highest abundance of MPs appeared in S5/S9 and S14 in surface water and sediments, respectively. Fiber and film with small particle size (<0.5 mm) were identified as typical and abundant MPs type among all samples. In addition, polyethylene (PE) was considered as dominant forms of MPs in surface water and sediment samples. Results from this study indicated a positive correlation with abundance of MPs and urbanization rate, which also showed an evident difference of MPs in different urban functional areas. Based on the types and quantity of detected MPs, we assessed the risk of MPs pollution in this study area, and the ecological risk category of MPs was at a high level. Importantly, our work might be employed as a potential information so as to better understand MPs pollution, source tracing and ecological risk assessment, which enhances the possibility of achieving effective control and supervision of MPs pollution in southern coastal aera of China.

Spatio-vertical distribution of riverine microplastics: Impact of the textile industry

Microplastics (MPs) contamination in rivers and lakes is of paramount environmental importance as freshwater systems transport MPs from land to ocean. However, information regarding the spatio-vertical distributions of MPs in rivers, and their associations with surrounding industrial activities, is scarce and unclear. This study investigated MPs in the Taipu River, where there is a highly developed textile industry in Yangtze River Delta, China. Results showed a widespread occurrence of MPs particles with concentrations in the range of 0.65-6.07 items/L and 0.30-3.63 items/L in surface and bottom waters. A higher abundance of MPs was observed in surface waters than in bottom waters (t = 5.423, p = 0.024). The MPs distributions varied markedly in space, with the highest abundances being found in textile manufacturing zones as a consequence of industrial release (F = 14.642, p < 0.001). Transparent fibers were the major MPs compositions with 100-500 μm in size. Polyethylene terephthalate (PET) accounted for 71.4% and 59.73% of the total MPs identified in surface and bottom water, respectively. These PET polymers were predominantly presented in "fibrous" shapes, further reflecting the point sources of textile wastewater. Moreover, polyvinyl acetate (PVAC), used as fabric coating and resin matrix to form nonwoven fabrics, was firstly highlighted at a watershed scale. Although risk assessments revealed a light to moderate risks of MPs in the Taipu River, textile wastewater appears to cause a high "grey water" footprint and increase the risks of MPs pollution from textile life-cycle production. This study bridged gaps between field data and policy-making for MPs control and shed insight into the cleaner production of the textile industry.

Personal protective equipment (PPE) pollution in the Caspian Sea, the largest enclosed inland water body in the world

The COVID-19 pandemic led to a still ongoing international health and sanity crisis. In the current scenario, the actions taken by the national authorities and the public prioritized measures to control the transmission of the virus, such as social distancing, and face mask-wearing. Unfortunately, due to the debilitated waste management systems and incorrect disposal of single-use face masks and other types of personal protective equipment (PPE), the occurrence of these types of items has led to the exacerbation of marine plastic pollution. Although various studies have focused on surveying marine coasts for PPE pollution, studies on inland water are largely lacking. In order to fill this knowledge gap, the present study assessed PPE pollution in the Iranian coast of the Caspian Sea, the largest enclosed inland water body in the world by following standard monitoring procedures. The results concerning the density (1.02 × 10-4 PPE/m2) composition (face masks represented 95.3% of all PPE) of PPE are comparable to previous studies in marine waters. However, a notable decrease in the occurrence of PPE was observed, probably to behavioral and seasonality reasons. The possible consequences of PPE pollution were discussed, although much more research is needed regarding the ecotoxicological aspects of secondary PPE contaminants, such as microplastics and chemical additives. It is expected that face mask mandates will be eventually halted, and PPE will stop being emitted to the environment. However, based on the lessons learned from the COVID-19 scenario, several recommendations for coastal solid waste management are provided. These are proposed to serve during and after the pandemic.

Sources, concentrations, distributions, fluxes and fate of microplastics in a hypersaline lake: Maharloo, south-west Iran

Hypersaline lakes support unique ecosystems and biogeochemistries but are often subject to anthropogenic pressures from pollution, water abstraction-diversion and climate change. Less understood, however, are the inputs, distributions and impacts of microplastics (MPs) in hypersaline environments. In this study, MPs are determined in water and sediment cores of Maharloo Lake, south-west Iran, and in the anthropogenically-impacted rivers that recharge the lake. MP concentrations in river water ranged from 0.05 MP L^-1 in the headwaters to about 2 MP L^-1 downstream of industrial effluents, with intermediate (but elevated) concentrations observed in the lake. The maximum surface concentration in lake sediment cores was about 860 MP kg^-1, and concentrations displayed a progressive reduction with increasing depth down to 50 cm that are qualitatively consistent with temporal changes in plastic production. The size distribution of MPs was skewed towards the finest fraction (< 100 μm) and the most abundant polymer types were polyethylene terephthalate, polyethylene and nylon. Flux calculations using river water data and published atmospheric deposition data for the region reveal that the atmosphere is, by at least an order of magnitude, the more important source. MPs added to the lake appear to be maintained in suspension by high density water but are subsequently deposited to sediments by encapsulation and nucleation as salts precipitate. In addition, it is proposed that direct atmospheric deposition to sediment takes place on areas that seasonally dry out and are subsequently inundated. The impacts of MPs on hypersaline ecosystems and biomass resources are unknown but warrant investigation.

Microplastic-associated pathogens and antimicrobial resistance in environment

The ubiquitous use of microplastics and their release into the environment especially the water bodies by anthropogenic/industrial activities are the major resources for microplastic contamination. The widespread and often injudicious use of antimicrobial drugs or antibiotics in various sectors including human health and hygiene, agriculture, animal husbandry and food industries are leading to the release of antibiotics into the wastewater/sewage and other water bodies, particularly in urban setups and thus leads to the antimicrobial resistance (AMR) in the microbes. Microplastics are emerging as the hubs as well as effective carriers of these microbial pathogens beside their AMR-genes (ARGs) in marine, freshwater, sewage/wastewater, and urban river ecosystems. These drug resistant bacteria interact with microplastics forming synthetic plastispheres, the ideal niche for biofilm formations which in turn facilitates the transfer of ARGs via horizontal gene transfer and further escalates the occurrence and levels of AMR. Microplastic-associated AMR is an emerging threat for human health and healthcare besides being a challenge for the research community for effective management/address of this menace. In this review, we encompass the increasing prevalence of microplastics in environment, emphasizing mainly on water environments, how they act as centers and vectors of microbial pathogens with their associated bacterial assemblage compositions and ultimately lead to AMR. It further discusses the mechanistic insights on how microplastics act as hosts of biofilms (creating the plastisphere). We have also presented the modern toolbox used for microplastic-biofilm analyses. A review on potential strategies for addressing microplastic-associated AMR is given with recent success stories, challenges and future prospects.

Disparities in Methods Used to Determine Microplastics in the Aquatic Environment: A Review of Legislation, Sampling Process and Instrumental Analysis

Plastic particles smaller than 5 mm, i.e., microplastics, have been detected in a number of environments. The number of studies on microplastics in marine environments, fresh water, wastewater, the atmosphere, and the human body are increasing along with a rise in the amounts of plastic materials introduced into the environment every year, all contributing to a range of health and environmental issues. Although the use of primary microplastics has been gradually reduced by recent legislation in many countries, new knowledge and data on these problems are needed to understand the overall lifecycle of secondary microplastics in particular. The aim of this review is to provide unified information on the pathways of microplastics into the environment, their degradation, and related legislation, with a special focus on the methods of their sampling, determination, and instrumental analysis. To deal with the health and environmental issues associated with the abundance of microplastics in the environment, researchers should focus on agreeing on a uniform methodology to determine the gravity of the problem through obtaining comparable data, thus leading to new and stricter legislation enforcing more sustainable plastic production and recycling, and hopefully contributing to reversing the trend of high amounts of microplastics worldwide.