A review of microwave-assisted advanced oxidation processes for wastewater treatment

Occurrence and environmental fate of anti-influenza drugs in a subcatchment of the Yodo River Basin, Japan

Understanding the current situation and risk of environmental contamination by anti-influenza drugs in aquatic environments is key to prevent the unexpected emergence and spread of drug-resistant viruses. However, few reports have been focused on newer drugs that have recently been introduced in clinical settings. In this study, the behaviour of the prodrug baloxavir marboxil (BALM)-the active ingredient of Xofluza, an increasingly popular anti-influenza drug-and its pharmacologically active metabolite baloxavir (BAL) in the aquatic environment was evaluated. Additionally, their presence in urban rivers and a wastewater treatment plant (WWTP) in the Yodo River basin was investigated and compared with those of the major anti-influenza drugs used to date (favipiravir (FAV), peramivir (PER), laninamivir (LAN), and its active metabolite, laninamivir octanoate (LANO), oseltamivir (OSE), and its active metabolite, oseltamivir carboxylate (OSEC), and zanamivir (ZAN)) to comprehensively assess their environmental fate in the aquatic environment. The results clearly showed that BALM, FAV, and BAL were rapidly degraded through photolysis (2-h, 0.6-h, and 0.4-h half-lives, respectively), followed by LAN, which was gradually biodegraded (7-h half-life). In addition, BALM and BAL decreased by up to 47 % after 4 days and 34 % after 2 days of biodegradation in river water. However, the remaining conventional drugs, except for LANO (<1 % after 10 days), were persistent, being transported from the upstream to downstream sites. The LogKd values for the rates of sorption of BALM (0.5-1.6) and BAL (1.8-3.1) on river sediment were higher than those of conventional drugs (-0.5 to 1.7). Notably, all anti-influenza drugs were effectively removed by ozonation (>90-99.9 % removal) after biological treatment at a WWTP. Thus, these findings suggest the importance of introducing ozonation to reduce pollution loads in rivers and the environmental risks associated with drug-resistant viruses in aquatic environments, thereby promoting safe river environments.

Experimental study of microwave-catalytic oxidative degradation of COD in livestock farming effluent by copper-loaded activated carbon

The problem of massive discharge of livestock wastewater is becoming more and more severe, causing irreversible damage to the ecological environment, and how to treat livestock wastewater efficiently and rapidly deserves to be studied in depth. In this work, CuO/granular activated carbon (GAC) loaded catalysts were prepared and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), nitrogen adsorption/desorption techniques, and X-ray energy spectroscopy (EDS). The results showed that CuO was successfully attached to the GAC surface with good adsorption performance. The effects of catalyst dosage, H2O2 dosage, initial pH, microwave power and microwave irradiation time in different reaction systems on the degradation efficiency of chemical oxygen demand (COD) in wastewater were investigated, and the orthogonal experiments were used to explore the importance ranking of these factors. The highest degradation rate of COD was found to be enhanced by 12.1% in the reaction system of CuO/GAC, and the initial pH had the greatest effect on the COD removal rate. The combined MW/catalyst/H2O2 method used in this work provided a rapid and effective degradation of COD in wastewater, which can be helpful for reference in other microwave catalytic oxidation studies.

Catalytic Degradation of Bisphenol A with a Magnetically Recoverable Geopolymer Composite Using Coal Gangue

The widespread presence and use of Bisphenol A (BPA) in aquatic environments has caused significant ecological damage. Coal gangue (CG), a byproduct of coal mining, poses a major environmental concern due to its vast land occupation and potential for pollution. A magnetic recyclable geopolymer (MnFe2O4-CGP) using coal gangue geopolymer (CGP) as the carrier was successfully synthesized and was evaluated for its ability to Fenton-like degrade BPA. The characterization techniques revealed the successful incorporation of spherical MnFe2O4 onto the CGP surface and that CGP serves as an excellent platform for the immobilization and dispersion of MnFe2O4. The degradation rate reached 100% within 60 min at pH = 5, 15 mmol/L H2O2, 0.6 g/L catalyst, and 50 mg/L BPA, significantly higher than MnFe2O4 and CGP alone. It was indicated that the degradation rate of BPA in MnFe2O4-CGP composites was 0.1121 min-1, which was consistent with the first-order kinetic model. The saturation magnetization of MnFe2O4-CGP was measured to be 10.96 emu/g, enabling convenient recovery. MnFe2O4-CGP exhibited excellent stability, as the degradation rate of BPA remained above 95% even after five reaction cycles. This efficiency may be due to the MnFe2O4-CGP induced generation of reactive radicals. Quenching and EPR radical trapping experiments unequivocally confirmed that the reactive radical was hydroxyl radical (•OH). These results indicate that MnFe2O4-CGP has potential application prospects as a magnetic recyclable geopolymer composite in Fenton-like catalysis.

Removal of tetramethylammonium hydroxide (TMAH) by cold plasma treatment combined with periodate oxidation: Degradation, kinetics, and toxicity study

Tetramethylammonium hydroxide (TMAH), which is a chemical used in the electronic industry, is classified as a hazardous material (HAZMAT class 8) that threatens aquatic ecosystems and human health. Consequently, numerous studies have attempted to remove TMAH using various treatment methods, including advanced oxidation processes such as ozone, UV, or Fenton oxidation. However, prior research has indicated a low kinetic rate of TMAH removal. In this context, we proposed an alternative to TMAH degradation by combining a cold plasma (CP) process with periodate oxidation. As for the kinetics of TMAH removal, the kinetic constant was improved by 5 times (0.1661 and 0.0301 for 40.56 and 2.2 W, respectively) as the electric power of a CP system increased from 2.2 to 40.56 W. The kinetic constant of a 40.56 W CP system further increased by 54 times (1.6250) than a 2 W CP system when 4 mM periodate was used simultaneously. As a result, the integrated CP/periodate system represented 2 times higher TMAH removal efficiency (29.5%) than a 2 W CP system (14.4%). This excellent TMAH degradation capability of the integrated CP/periodate system became pronounced at pH 10 and 25 °C. Overall, the integrated CP/periodate system is expected to be a viable management option for effectively controlling hazardous TMAH chemicals.

Recent advances of piezo-catalysis and photocatalysis for efficient environmental remediation

The efficient degradation of organic pollutants in diverse environmental matrices can be achieved through the synergistic application of piezo-catalysis and photocatalysis. The focus of this study is on understanding the fundamental principles and mechanisms that govern the collaborative action of piezoelectric and photocatalytic materials. Piezoelectric nanomaterials, under mechanical stress, generate piezo-potential, which, when coupled with photocatalysts, enhances the generation and separation of charge carriers. The resulting cascade of redox reactions promotes the degradation of a wide spectrum of organic pollutants. The comprehensive investigation involves a variety of experimental techniques, including advanced spectroscopy and microscopy, to elucidate the intricate interplay between mechanical and photoinduced processes. The influence of key parameters, such as material composition, morphology, and external stimuli on the catalytic performance, is systematically explored. This study contributes to the increasing knowledge of environmental remediation and lays the foundation for the development of advanced technologies using piezo and photocatalysis for sustainable pollutant removal.

Enhanced Heterogeneous Fenton Degradation of Organic Dyes by Bimetallic Zirconia-Based Catalysts

The qualitative impact of pollutants on water quality is mainly related to their nature and their concentration, but in any case, they determine a strong impact on the involved ecosystems. In particular, refractory organic compounds represent a critical challenge, and several degradation processes have been studied and developed for their removal. Among them, heterogeneous Fenton treatment is a promising technology for wastewater and liquid waste remediation. Here, we have developed mono- and bimetallic formulations based on Co, Cu, Fe, and Mn, which were investigated for the degradation of three model organic dyes (methylene blue, rhodamine B, and malachite green). The treated samples were then analyzed by means of UV-vis spectrophotometry techniques. Bimetallic iron-based materials achieved almost complete degradation of all three model molecules in very short time. The Mn-Fe catalyst resulted in the best formulation with an almost complete degradation of methylene blue and malachite green at pH 5 in 5 min and of rhodamine B at pH 3 in 30 min. The results suggest that these formulations can be applied for the treatment of a broad range of liquid wastes comprising complex and variable organic pollutants. The investigated catalysts are extremely promising when compared to other systems reported in the literature.

Machine learning-powered estimation of malachite green photocatalytic degradation with NML-BiFeO3 composites

This study explores the potential of photocatalytic degradation using novel NML-BiFeO3 (noble metal-incorporated bismuth ferrite) compounds for eliminating malachite green (MG) dye from wastewater. The effectiveness of various Gaussian process regression (GPR) models in predicting MG degradation is investigated. Four GPR models (Matern, Exponential, Squared Exponential, and Rational Quadratic) were employed to analyze a dataset of 1200 observations encompassing various experimental conditions. The models have considered ten input variables, including catalyst properties, solution characteristics, and operational parameters. The Exponential kernel-based GPR model achieved the best performance, with a near-perfect R2 value of 1.0, indicating exceptional accuracy in predicting MG degradation. Sensitivity analysis revealed process time as the most critical factor influencing MG degradation, followed by pore volume, catalyst loading, light intensity, catalyst type, pH, anion type, surface area, and humic acid concentration. This highlights the complex interplay between these factors in the degradation process. The reliability of the models was confirmed by outlier detection using William's plot, demonstrating a minimal number of outliers (66-71 data points depending on the model). This indicates the robustness of the data utilized for model development. This study suggests that NML-BiFeO3 composites hold promise for wastewater treatment and that GPR models, particularly Matern-GPR, offer a powerful tool for predicting MG degradation. Identifying fundamental catalyst properties can expedite the application of NML-BiFeO3, leading to optimized wastewater treatment processes. Overall, this study provides valuable insights into using NML-BiFeO3 compounds and machine learning for efficient MG removal from wastewater.

Piezoelectric catalytic driven advanced oxidation process using two-dimensional metal dichalcogenides for wastewater pollutants remediation

The public and society have increasingly recognized numerous grave environmental issues, including water pollution, attributed to the rapid expansion of industrialization and agriculture. Renewable energy-driven catalytic advanced oxidation processes (AOPs) represent a green, sustainable, and environmentally friendly approach to meet the demands of environmental remediation. In this context, 2D transition metal dichalcogenides (TMDCs) piezoelectric materials, with their non-centrosymmetric crystal structure, exhibit unique features. They create dipole polarization, inducing a built-in electric field that generates polarized holes and electrons and triggers redox reactions, thereby facilitating the generation of reactive oxygen species for wastewater pollutant remediation. A broad spectrum of 2D TMDCs piezoelectric materials have been explored in self-integrated Fenton-like processes and persulfate activation processes. These materials offer a more simplistic and practical method than traditional approaches. Consequently, this review highlights recent advancements in 2D TMDCs piezoelectric catalysts and their roles in wastewater pollutant remediation through piezocatalytic-driven AOPs, such as Fenton-like processes and sulfate radicals-based oxidation processes.

Preparation of Cobalt-Nitrogen Co-Doped Carbon Nanotubes for Activated Peroxymonosulfate Degradation of Carbamazepine

Cobalt-nitrogen co-doped carbon nanotubes (Co3@NCNT-800) were synthesized via a facile and economical approach to investigate the efficient degradation of organic pollutants in aqueous environments. This material demonstrated high catalytic efficiency in the degradation of carbamazepine (CBZ) in the presence of peroxymonosulfate (PMS). The experimental data revealed that at a neutral pH of 7 and an initial CBZ concentration of 20 mg/L, the application of Co3@NCNT-800 at 0.2 g/L facilitated a degradation rate of 64.7% within 60 min. Mechanistic investigations indicated that the presence of pyridinic nitrogen and cobalt species enhanced the generation of reactive oxygen species. Radical scavenging assays and electron spin resonance spectroscopy confirmed that radical and nonradical pathways contributed to CBZ degradation, with the nonradical mechanism being predominant. This research presents the development of a novel PMS catalyst, synthesized through an efficient and stable method, which provides a cost-effective solution for the remediation of organic contaminants in water.

A Comprehensive Review on Modification of Titanium Dioxide-Based Catalysts in Advanced Oxidation Processes for Water Treatment

It has become necessary to develop effective strategies to prevent and reduce water pollution as a result of the increase in dangerous pollutants in water reservoirs. Consequently, there is a need to design new catalyst materials to promote the efficiency of advanced oxidation processes (AOPs) in the field of wastewater treatment plant to ensure the mineralization of trace organic contaminants. A notable approach gaining attention involves the coupling of sulfate radicals-based AOPs to photocatalysis or electrocatalysis processes, aiming to achieve the complete removal of refractory contaminants into water and carbon dioxide. Titanium dioxide as metal oxide has received great attention for its catalytic application in water purification. TiO2 catalysts offer a multitude of advantages in AOPs. They are characterized by their high photocatalytic activity under both ultraviolet and visible light, making them environmentally friendly due to the absence of toxic byproducts during oxidation. Their versatility is remarkable, finding utility in various AOPs, from photocatalysis to photo-Fenton processes. TiO2's durability ensures long-lasting catalytic activity, which is crucial for continuous treatment processes, and their cost-effectiveness is particularly advantageous. Furthermore, their chemical stability allows it to withstand varying pH conditions. However, the large band gap energy and low electrical conductivity hinder the catalytic reaction effectiveness. This review aims to examine various approaches to enhance the catalytic performance of titanium dioxide, with the objective of enabling more efficient water purification methods.

Efficient degradation of chlorpyrifos and intermediate in soil by a novel microwave induced advanced oxidation process: A two-stage reaction

The application of microwave/peroxymonosulfate (MW/PMS) in soil remediation has been limited by some shortages including low utilization efficiency of oxidants, low MW absorption capacity of soil particles and incomplete degradation of intermediate. In this study, heating pad waste (HPW) was added in the MW/PMS system to increase the ability of absorbing MW and degradation efficiency of toxic intermediate. A two-stage method for degradation of chlorpyrifos (CPF) and its intermediate 3,5,6-trichloro-2-pyridinol (TCP) by MW/PMS assisted with HPW was proposed. In the first stage, more than 90% of CPF was degraded within 15 min before the addition of HPW, and most of the CPF was converted into TCP through direct or indirect pathways under the action of 1O2. In the second stage, more than 70% of the generated TCP was rapidly degraded through SO4•- oxidation and electron transfer. The TCP was further degraded with the assistance of HPW through methylation, hydroxylation and dechlorination etc., and the toxicity of degradation products was decreased significantly. pH and soil organic matter had little influences on CPF and TCP degradation. Therefore, a new strategy for remediation of CPF contaminated-soil was provided based on MW/PMS technology and the concept of "treating waste with waste".

Generation and engineering applications of sulfate radicals in environmental remediation

Sulfate radical (SO4•-)-based advanced oxidation processes (AOPs) have become promising alternatives in environmental remediation due to the higher redox potential (2.6-3.1 V) and longer half-life period (30-40 μs) of sulfate radicals compared with many other radicals such as hydroxyl radicals (•OH). The generation and mechanisms of SO4•- and the applications of SO4•--AOPs have been examined extensively, while those using sulfite as activation precursor and their comparisons among various activation precursors have rarely reviewed comprehensively. In this article, the latest progresses in SO4•--AOPs were comprehensively reviewed and commented on. First of all, the generation of SO4•- was summarized via the two activation methods using various oxidant precursors, and the generation mechanisms were also presented, which provides a reference for guiding researchers to better select two precursors. Secondly, the reaction mechanisms of SO4•- were reviewed for organic pollutant degradation, and the reactivity was systematically compared between SO4•- and •OH. Thirdly, methods for SO4•- detection were reviewed which include quantitative and qualitative ones, over which current controversies were discussed. Fourthly, the applications of SO4•--AOPs in various environmental remediation were summarized, and the advantages, challenges, and prospects were also commented. At last, future research needs for SO4•--AOPs were also proposed consequently. This review could lead to better understanding and applications of SO4•--AOPs in environmental remediations.

Strategies for enhancing performance of perovskite bismuth ferrite photocatalysts (BiFeO3): A comprehensive review

Organic pollutants pose a significant threat to water safety, and their degradation is of paramount importance. Photocatalytic technology has emerged as a promising approach for environmental remediation, and Bismuth ferrite (BiFeO3) has been shown to exhibit remarkable potential for photocatalytic degradation of water pollutants, with its excellent crystal structure properties and visible light photocatalytic activity. This review presents an overview of the crystal properties and photocatalytic mechanism of perovskite bismuth ferrite (BiFeO3), as well as a summary of various strategies for enhancing its efficiency in photocatalytic degradation of organic pollutants. These strategies include pure phase preparation, microscopic modulation, composite modification of BiFeO3, and the integration of Fenton-like reactions and external field-assisted methods to improve its photocatalytic performance. The review emphasizes the impact of each strategy on photocatalytic enhancement. By providing comprehensive strategies for improving the efficiency of BiFeO3 photocatalysis, this review inspires new insights for efficient degradation of organic pollutants using BiFeO3 photocatalysis and contributes to the development of photocatalysis in environmental remediation.

CaCu3Ti4O12 Perovskite Materials for Advanced Oxidation Processes for Water Treatment

The many pollutants detected in water represent a global environmental issue. Emerging and persistent organic pollutants are particularly difficult to remove using traditional treatment methods. Electro-oxidation and sulfate-radical-based advanced oxidation processes are innovative removal methods for these contaminants. These approaches rely on the generation of hydroxyl and sulfate radicals during electro-oxidation and sulfate activation, respectively. In addition, hybrid activation, in which these methods are combined, is interesting because of the synergistic effect of hydroxyl and sulfate radicals. Hybrid activation effectiveness in pollutant removal can be influenced by various factors, particularly the materials used for the anode. This review focuses on various organic pollutants. However, it focuses more on pharmaceutical pollutants, particularly paracetamol, as this is the most frequently detected emerging pollutant. It then discusses electro-oxidation, photocatalysis and sulfate radicals, highlighting their unique advantages and their performance for water treatment. It focuses on perovskite oxides as an anode material, with a particular interest in calcium copper titanate (CCTO), due to its unique properties. The review describes different CCTO synthesis techniques, modifications, and applications for water remediation.

Degradation of refractory organic matter in MBR effluent from treating landfill leachate by the UV-nZVI-H2O2 system

In this study, nano zero-valent iron (nZVI) was used as the Fe²⁺ source in the Fenton reaction, and a UV-nZVI-H₂O₂ system was constructed to efficiently degrade and mineralize refractory organic matter in landfill leachate. The results showed that under the optimal conditions (initial pH = 3, UV = 14 W, nZVI = 0.5 g/L, and [H₂O₂] = 30 mM), the removal efficiencies of total organic carbon, absorbance at 254 nm, and color number were 61.38%, 83.89%, and 85.79%, respectively. Control experiments show that the UV-nZVI-H₂O₂ system has the highest removal rate and mineralization rate of refractory organic matter. The excellent performance of the UV-nZVI-H₂O₂ system is related to a higher H₂O₂ utilization rate. The H₂O₂ residue in the UV-nZVI-H₂O₂ system was the lowest, and the effective utilization rate of H₂O₂ was as high as 98.80%. Alcohol quenching experiments and hydroxyl radical quantitative experiments showed that the dominant reactive oxygen species in the UV-nZVI-H₂O₂ system was HO^• and the yield of HO^• was as high as 2007.80 μM, which was much higher than that in other systems. The results of spectra analysis showed that the low molecular weight, high fluorescence frequency organic matter, and relatively stable aromatic organic matter were significantly degraded after treatment with the UV-nZVI-H₂O₂ system and the aromatic degree, humification degree, molecular weight, and molecular polymerization degree of refractory organic matter were also significantly decreased. The mechanism of the UV-nZVI-H₂O₂ reaction includes homogeneous and heterogeneous Fenton reactions and adsorption and precipitation of organic matter by iron-based colloids. This study can provide theoretical and technical support for the advanced treatment of refractory organic matter in landfill leachate.

Advanced oxidation process: a sustainable technology for treating refractory organic compounds present in industrial wastewater

The world faces tremendous challenges and environmental crises due to the rising strength of wastewater. The conventional technologies fail to achieve the quality water that can be reused after treatment means "zero effluent" discharge of the industrial effluent. Therefore, now the key challenge is to develop improved technologies which will have no contribution to secondary pollution and at the same time more efficient for the socio-economic growth of the environment. Sustainable technologies are needed for wastewater treatment, reducing footprint by recycling, reusing, and recovering resources. Advanced oxidation process (AOP) is one of the sustainable emerging technologies for treating refractory organic contaminants present in different industrial wastewaters like textile, paper and pulp, pharmaceuticals, petrochemicals, and refineries. This critical review emerges details of advanced oxidation processes (AOPs), mentioning all possible permutations and combinations of components like ozone, UV, the catalyst used in the process. Non-conventional AOP systems, microwave, ultrasound, and plasma pulse assisted are the future of the oxidation process. This review aims to enlighten the role of AOPs for the mineralization of refractory organic contaminants (ROC) to readily biodegradable organics that cannot be either possible by conventional treatment. The integrated AOPs can improve the biodegradability of recalcitrant organic compounds and reduce the toxicity of wastewater, making them suitable for further biological treatment.

Machine learning approaches to predict the photocatalytic performance of bismuth ferrite-based materials in the removal of malachite green

This study focuses on the potential capability of numerous machine learning models, namely CatBoost, GradientBoosting, HistGradientBoosting, ExtraTrees, XGBoost, DecisionTree, Bagging, light gradient boosting machine (LGBM), GaussianProcess, artificial neural network (ANN), and light long short-term memory (LightLSTM). These models were investigated to predict the photocatalytic degradation of malachite green from wastewater using various NM-BiFeO₃ composites. A comprehensive databank of 1200 data points was generated under various experimental conditions. The ten input variables selected were the catalyst type, reaction time, light intensity, initial concentration, catalyst loading, solution pH, humic acid concentration, anions, surface area, and pore volume of various photocatalysts. The MG dye degradation efficiency was selected as the output variable. An evaluation of the performance metrics suggested that the CatBoost model, with the highest test coefficient of determination (0.99) and lowest mean absolute error (0.64) and root-mean-square error (1.34), outperformed all other models. The CatBoost model showed that the photocatalytic reaction conditions were more important than the material properties. The modeling results suggested that the optimized process conditions were a light intensity of 105 W, catalyst loading of 1.5 g/L, initial MG dye concentration of 5 mg/L and solution pH of 7. Finally, the implications and drawbacks of the current study were stated in detail.

A critical review on the synthesis of NH2-MIL-53(Al) based materials for detection and removal of hazardous pollutants

Nowadays, emerging hazardous pollutants have caused many harmful effects on the environment and human health, calling for the state of the art methods for detection, qualification, and treatment. Metal-organic frameworks are porous, flexible, and versatile materials with unique structural properties, which can solve such problems. In this work, we reviewed the synthesis, activation, and characterization, and potential applications of NH₂-MIL-53(Al). This material exhibited intriguing breathing effects, and obtained very high surface areas (182.3-1934 m²/g) with diverse morphologies. More importantly, NH₂-MIL-53(Al) based materials could be used for the detection and removal of various toxic pollutants such as organic dyes, pharmaceuticals, herbicides, insecticides, phenols, heavy metals, and fluorides. We shed light on plausible adsorption mechanisms such as hydrogen bonds, π-π stacking interactions, and electrostatic interactions onto NH₂-MIL-53(Al) adsorbents. Interestingly, NH₂-MIL-53(Al) based adsorbents could be recycled for many cycles with high stability. This review also recommended that NH₂-MIL-53(Al) based materials can be a good platform for the environmental remediation fields.

Enhanced photocatalytic degradation of Reactive Red 120 dye under solar light using BiPO4@g-C3N4 nanocomposite photocatalyst

Azo dyes such as Reactive Red 120 raise great concerns about their increased harmfulness. Photocatalytic degradation is considered to be one of the most efficient techniques for Reactive Red 120 degradation. Herein, a highly solar active graphitic carbon nitride-assisted bismuth phosphate nanocomposite (BiPO₄@g-C₃N₄) was synthesized by the thermal decomposition of melamine followed by the co-precipitation method. Various analytical techniques were utilized to characterize the prepared BiPO₄, g-C₃N₄, and BiPO₄@g-C₃N₄ nanocomposites. Scanning electron microscopy (SEM) shows the nanorods and particle morphology of the bare BiPO₄ and g-C₃N₄ respectively. Furthermore, the optical band gap energies of the BiPO₄, g-C₃N₄, and BiPO₄@g-C₃N₄ nanocomposite have been calculated to be 4.20, 2.66, and 2.68 eV respectively. Under sunlight, the BiPO₄@g-C₃N₄ nanocomposite showed higher photocatalytic activity towards the degradation of RR120. The BiPO₄@g-C₃N₄ nanocomposite efficiently degrades the RR120 under sunlight with a higher first-order reaction rate constant of 0.0145 min^-1. This is seven times higher than that of bare BiPO₄ (0.0019 min^-1) nanorods and four times greater than g-C₃N₄ (0.0036 min^-1). The photocatalytic efficiency was found to be maximum at pH 4 and decreased as the pH of the solution increased. Even after five recycle runs, the catalyst performance of the RR120 dye has decreased by less than 5%, indicating the high stability of the BiPO₄@g-C₃N₄ nanocomposite. Furthermore, the radical trapping experiment demonstrates that the active species in the dye degradation process are holes and hydroxide radicals. The photocatalytic mechanism was proposed for the BiPO₄@g-C₃N₄ nanocomposite and further validated by the electrochemical impedance spectroscopy analysis.

Recent research advancements in microwave photocatalytic treatment of aqueous solutions

In recent years, microwave (MW) photocatalytic treatment was used for the removal of several pollutants from wastewater to overcome the disadvantages of conventional photocatalytic treatment. MW irradiation significantly enhanced the photocatalytic degradation pollutants and is considered an innovative treatment approach. This enhancement in photoactivity was mainly attributed to thermal and non-thermal effects of the MW irradiation. Even though the thermal effects of MW irradiation have been conclusively studied, there are many conflicting results regarding the non-thermal effects in catalysts. In general, it has been verified that the non-thermal effects are due to the electrical and magnetic properties of MW. In this article, a detailed review of the recent advancements in MW-assisted photocatalysis has been done, emphasizing the non-thermal effects of MW radiation on the surface of the catalysts. Also, the evolution of external ultraviolet (UV) sources from the conventional Hg lamp to the latest microwave-driven electrodeless lamps (MDEL) has been discussed. MW photocatalytic treatment using MDELs showed complete removal of lignin, dimethyl phthalate (DMP), and azo dye reactive brilliant red X-3B (BR) and more than 90% removal for cimetidine (CMT), rhodamine B (RB), and methylene blue (MB). A brief comparison regarding the removal efficiencies of pollutants by various AOPs and MW photocatalysis has been made to understand the enhanced photoactivity. In addition, various operating parameters that affect the MW photocatalysis like MW intensity, pH, dissolved oxygen, and catalyst dosage; the degradation pathways of various pollutants; and the cost assessment of MW photocatalysis are discussed in detail. This paper will deliver a scientific and technical overview and useful information to scientists and engineers working in this field.

Romo AI, Pudar S, Putnam ST, Bustos E, Rodríguez-López J. Real-Time Detection of Hydroxyl Radical Generated at Operating Electrodes via Redox-Active Adduct Formation Using Scanning Electrochemical Microscopy

The hydroxyl radical (•OH) is one of the most attractive reactive oxygen species due to its high oxidation power and its clean (photo)(electro)generation from water, leaving no residues and creating new prospects for efficient wastewater treatment and electrosynthesis. Unfortunately, in situ detection of •OH is challenging due to its short lifetime (few ns). Using lifetime-extending spin traps, such as 5,5-dimethyl-1-pyrroline N-oxide (DMPO) to generate the [DMPO-OH]• adduct in combination with electron spin resonance (ESR), allows unambiguous determination of its presence in solution. However, this method is cumbersome and lacks the necessary sensitivity and versatility to explore and quantify •OH generation dynamics at electrode surfaces in real time. Here, we identify that [DMPO-OH]• is redox-active with E0 = 0.85 V vs Ag|AgCl and can be conveniently detected on Au and C ultramicroelectrodes. Using scanning electrochemical microscopy (SECM), a four-electrode technique capable of collecting the freshly generated [DMPO-OH]• from near the electrode surface, we detected its generation in real time from operating electrodes. We also generated images of [DMPO-OH]• production and estimated and compared its generation efficiency at various electrodes (boron-doped diamond, tin oxide, titanium foil, glassy carbon, platinum, and lead oxide). Density functional calculations, ESR measurements, and bulk calibration using the Fenton reaction helped us unambiguously identify [DMPO-OH]• as the source of redox activity. We hope these findings will encourage the rapid, inexpensive, and quantitative detection of •OH for conducting informed explorations of its role in mediated oxidation processes at electrode surfaces for energy, environmental, and synthetic applications.

Tailoring wood waste biochar as a reusable microwave absorbent for pollutant removal: Structure-property-performance relationship and iron-carbon interaction

This study innovated the concept in designing an efficient and reusable microwave (MW) absorbent through concurrent exploitation of carbon graphitization, oxygen functionalization, and carbothermal iron reduction underpinned by an endothermic co-pyrolysis of wood waste and low-dosage iron. A powerful MW assimilation was accomplished from nanoscale amorphous magnetic particles as well as graphitized microporous carbon-iron skeleton in the biochar composites. Relative to a weak magnetic loss derived from the iron phase, the graphitic carbon architecture with abundant surface functionalities (i.e., CO and CO) exhibited a strong dielectric loss, which was thus prioritized as major active sites during MW reuse. The MW-absorbing biochar demonstrated a fast, robust, and durable removal of a refractory herbicide (2,4-dichlorophenoxy acetic acid) under mild MW irradiation with zero chemical input, low electricity consumption, and negligible Fe dissolution. Overall, this study will foster carbon-neutral industrial wastewater treatment and wood waste valorization.

Chloride-Enhanced Removal of Ammonia Nitrogen and Organic Matter from Landfill Leachate by a Microwave/Peroxymonosulfate System

Landfill leachate contains not only high concentrations of refractory organic matter and ammonia nitrogen, but also high concentrations of chloride ions (Cl−). The modification of reactive species of the peroxymonosulfate (PMS) oxidation system by Cl− and its priority sequence for the removal of NH4+-N and organic matter from landfill leachate remain unclear. This study investigated the removal characteristics of NH4+-N and organic matter in the microwave (MW)/PMS system with high Cl− content. The results show that increasing Cl− concentration significantly improves the production of hypochlorous acid (HOCl) in the MW/PMS system under acidic conditions, and that the thermal and non-thermal effects of MW irradiation have an important influence on the HOCl produced by PMS activation. The maximum cumulative concentration of HOCl was 748.24 μM after a reaction time of 2 min. The formation paths of HOCl are (i) SO4•− formed by the MW/PMS system interacting with Cl− and HO•, and (ii) the nucleophilic addition reaction of PMS and Cl−. Moreover, the high concentration of HOCl produced by the system can not only remove NH4+-N in situ, but also interact with PMS to continuously generate Cl• as an oxidant to participate in the reaction with pollutants (e.g., NH4+-N and organic matter). Common aqueous substances (e.g., CO32−, HCO3−, NO3−, and humic acid) in landfill leachate will compete with NH4+-N for reactive species in the system, and will thereby inhibit its removal to a certain extent. It was found that when NH4+-N and leachate DOM co-exist in landfill leachates, they would compete for reactive species, and that humic acid-like matter was preferentially removed, leading to the retention of fulvic acid-like matter. It is hoped that this study will provide theoretical support for the design and optimization of methods for removing NH4+-N and organic matter from landfill leachate with high chloride ion content.

A comprehensive review on water remediation using UiO-66 MOFs and their derivatives

Metal-organic frameworks (MOFs) are a versatile class of porous materials offering unprecedented scope for chemical and structural tunability. On account of their synthetic versatility, tunable and exceptional host-guest chemistry they are widely utilized in many prominent water remediation techniques. However, some of the MOFs present low structural stabilities specifically in aqueous and harsh chemical conditions which impedes their potential application in the field. Among the currently explored MOFs, UiO-66 exhibits structural robustness and has gained immense scientific popularity. Built with a zirconium-terephthalate framework, the strong Zr-O bond coordination contributes to its stability in aqueous, chemical, and thermal conditions. Moreover, other exceptional features such as high surface area and uniform pore size add to the grand arena of porous nanomaterials. As a result of its stable nature, UiO-66 offers relaxed admittance towards various functionalization, including synthetic and post-synthetic modifications. Consequently, the adsorptive properties of these highly stable frameworks have been modulated by the addition of various functionalities. Moreover, due to the presence of catalytically active sites, the use of UiO-66 has also been extended towards the degradation of pollutants. Furthermore, to solve the practical handling issues of the crystalline powdered forms, UiO-66 has been incorporated into various membrane supports. The incorporation of UiO-66 in various matrices has enhanced the rejection, permeate flux, and anti-fouling properties of membranes. The combination of such exceptional characteristics of UiO-66 MOF has expanded its scope in targeted purification techniques. Subsequently, this review highlights the role of UiO-66 in major water purification techniques such as adsorption, photocatalytic degradation, and membrane separation. This comprehensive review is expected to shed light on the existing developments and guide the inexhaustible futuristic scope of UiO-66 MOF.

Nanocellulose fine-tuned poly(acrylic acid) hydrogel for enhanced diclofenac removal

Hydrogel was recognized as one of the most promising materials for adsorption of pharmaceuticals and personal care products (PPCPs). The highly efficient bio-based nanocelluloses fine-tuned poly(acrylic acid) hydrogel (PAA/NC) adsorbent was constructed by adjusting aspect ratio, surface charge and crystallinity of NC. The cross-linked networks were fabricated through a single-step free-radical polymerization via steric effect and hydrogen bonds. The uniform three-dimensional structures with abundant macropores and mesopores were in-situ visualized by the cryogenic-scanning electron microscopy (Cryo-SEM). The diclofenac adsorption capacity of TEMPO oxidized cellulose nanofibers (TCNF) incorporated PAA hydrogel (PAA/TCNF, 559.8 mg·g^-1) was circa 2.1 times higher than pristine PAA (293.5 mg·g^-1) due to the elevated specific surface area, favorable spatial structure with unimpeded channels and abundant surface-charged carboxylic groups. Moreover, PAA/NC hydrogel exhibited a wide-pH applicability and high salinity tolerance. The adsorption was predominantly determined by hydrogen bonds, validated by XPS and FT-IR analysis. It was demonstrated developed PAA/NC hydrogel with unique porous structure significantly enhanced adsorption capacity for potential application in the purification of refractory organic pollutants-containing wastewater.

Review on effect of different type of dyes on advanced oxidation processes (AOPs) for textile color removal

The textile industry is one of the most valuable industries, especially in developing countries, because it employs a large portion of the workforce. However, the development of the textile industry has led to increasing concern about environmental issues. Wastewater from the textile industry has a high COD and an undesirable color. Color is one of the problems with the wastewater due to its toxicity and low biodegradability. Color in textile wastewater mainly originates from the dyestuff used during the dyeing or printing process. Amongst all of available technology for color removal, advanced oxidation processes (AOPs) are considered one of the best and the most potential technology. However, the understanding of AOPs reaction mechanism to degrade dyestuff is still limited. In general, dyes degradation mechanism will vary and mainly depend on the chemical structure of the dyes itself. Some reaction pathway that seems less favorable thermodynamically can still happen during the process. Understanding the mechanism will be beneficial for future dyes improvement, especially on developing the moiety of the aromatic compound in order to produce easily degraded dyes while maintaining the fastness quality.