Facile route for synthesis of Fe0/Fe3C/γ-Fe2O3 carbon composite using hydrothermal carbonization of sugarcane bagasse and its use as effective adsorbent for sulfamethoxazole removal

Effective removal of Rhodamine B using the hydrothermal carbonization and citric acid modification of furfural industrial processing waste

In this study, the removal of RhB from water by furfural residue (FR) biochar was prepared by hydrothermal carbonization (HTC) and citric acid (CA) modification and named this biochar as CHFR (C refers to citric acid, H refers to hydrothermal carbonization and FR is furfural residue). The CHFR were characterized by SEM, FT-IR and XPS, and CHFR was investigated by the effects of initial concentration, adsorbent dosage, pH, and contact time on the removal of RhB, and the experimental data were analyzed using the adsorption isotherm models, the adsorption kinetic models and thermodynamics, et al. The results showed that CHFR has strong adsorption performance, and the theoretical maximum adsorption capacity of RhB was 39.46 mg·g-1 under the reaction conditions of pH3, the dosage of 1.5 g·L-1, and 120 min contact time, with a removal efficiency close to 100%. the adsorption of RhB by CHFR is spontaneous and endothermic, which is consistent with the Freundlich adsorption, and the isotherm model fits well with the pseudo-second-order model, and the adsorption rate could still be as high as 92.74% after five regenerations, therefore, CHFR is an environmentally friendly and efficient adsorbent with excellent adsorption regeneration performance.

Immobilization of hydrochar in cellulose beads for eradicating paracetamol from synthetic and sewage water

Sodium carboxymethyl cellulose polymer was used as a support matrix in immobilizing activated hydrochar derived from bamboo using hydrothermal carbonization. The structural and textural morphology of the beads were studied using FTIR, XRD, SEM/EDS, BET and TGA. Activated hydrochar showed a rough surface with irregular spherical shaped structure. Various oxygenated functional groups in composite beads and activated hydrochar were identified that assist in interaction with PARA pollutant. TGA analysis showed weight loss at three stages 200 °C, 365 °C and 710 °C that leads to complete disintegration of composite beads. BET analysis showed a variation in the surface area between activated hydrochar and beads which could be due to air drying process. Batch adsorption test was conducted for investigating the efficiency of beads in removing PARA from water. Pseudo-second order and Langmuir isotherm fitted the best highlighting chemical mode of adsorption with homogenous interaction on the adsorbent surface. 48.12 mg g-1 was the maximum adsorption capacity estimated from sorption between beads and PARA. For practical applications beads were effectively used in reducing COD levels of PARA spiked sewage water with the defined experimental parameters. Ethanol would be effectively used as regenerating solvent in recycling the beads for the betterment of cost reduction. The activated hydrochar immobilized cellulose beads would be successfully applied as adsorbent in removing target pollutants from water thereby reducing the hurdles faced with respect to fine particles in water treatment.

Pomegranate Peel Extract Stabilized Selenium Nanoparticles Synthesis: Promising Antimicrobial Potential, Antioxidant Activity, Biocompatibility, and Hemocompatibility

The green synthesis of selenium nanoparticles (Se NPs) had been synthesized by pomegranate peel extract (PPE). The antimicrobial, antioxidant, and anticancer activities of the synthesized Se NPs, as well as their hemocompatibility, were investigated. Se NPs were characterized by UV-Vis., SEM, XRD, HR-TEM, DLS, EDX, FTIR, and mapping techniques. HR-TEM image represented the spheroidal forms with moderately monodispersed NPs with a mean diameter 14.5 nm. The SEM image of Se NPs, incorporated with PPE, exhibits uniform NP surfaces, and the appearance was clear. The antimicrobial results confirmed the potential of Se NPs to hinder the growth of some tested pathogenic microbes. Results revealed that Se NPs exhibited promising antibacterial activity against Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis, Staphylococcus aureus, and Streptococcus mutans where inhibition zones were 29, 16, 41, 22, and 54 mm, respectively. Likewise, it exhibited antifungal activity where the values of inhibition zones were 41, 40, 38, and 36 mm against Candida albicans, Cryptococcus neoformans, Aspergillus fumigatus, and A. niger, respectively. The antioxidant activities of Se NPs at concentrations 250-4000 µg/mL were greater than 90% in all cases. Se NP concentrations of 500 µg/mL or less are safe in usage according to hemocompatibility study. Se NPs had an IC50 of 113.73 µg/mL in a cytotoxicity experiment. Results revealed that Se NPs have promising anticancer activities against MCF7 and Mg63 cancerous cell line, where IC50 was 69.8 and 47.9 μg/mL, respectively. In conclusion, Se NPs were successfully biosynthesized using PPE for the first time; these Se NPs had promising antimicrobial, antioxidant, and anticancer activities.

Two-step fabrication of cellulose embedded Fe3O4/Fe3+ composite beads as catalyst in degradation of sulfamethoxazole in floating bed reactor

In this study, magnetite particles were successfully embedded in sodium carboxymethyl cellulose as beads using FeCl₃ as the cross-linker in two step-method and it was used as a Fenton-like catalyst to degrade sulfamethoxazole in aqueous solution. The surface morphology and functional groups influence of the Na-CMC magnetic beads was studied using FTIR and SEM analysis. The nature of synthesized iron oxide particles was confirmed as magnetite using XRD diffraction. The structural arrangement of Fe³⁺ and iron oxide particles with CMC polymer was discussed. The influential factors for SMX degradation efficiency were investigated including the pH of the reaction medium (4.0), catalyst dosage (0.2 g L^-1) and initial SMX concentration (30 mg L^-1). The results showed that under optimal conditions 81.89% SMX degraded in 40 min using H₂O₂. The reduction in COD was estimated to be 81.2%. SMX degradation was initiated neither by the cleaving of C-S nor C-N followed by some chemical reactions. Complete mineralization of SMX was not achieved which could be due to an insufficient amount of Fe particles in CMC matrix that are responsible for the generation of *OH radicals. It was explored that degradation followed pseudo-first order kinetics. Fabricated beads were successfully applied in a floating bed column in which the beads were allowed to float in sewage water spiked with SMX for 40 min. A total reduction of 79% of COD was achieved in treating sewage water. The beads could be used 2-3 times with significant reduction in catalytic activity. It was found that the degradation efficiency was attributed to a stable structure, textural property, active sites and *OH radicals.

3D porous carbon-embedded nZVI@Fe2O3 nanoarchitectures enable prominent performance and recyclability in antibiotic removal

Overcoming the instability and poor recyclability during the practical applications of contaminant scavengers is a challenging topic. Herein, a three-dimensional (3D) interconnected carbon aerogel (nZVI@Fe₂O₃/PC) embedding a core-shell nanostructure of nZVI@Fe₂O₃ was elaborately designed and fabricated via an in-situ self-assembly process. The porous carbon with 3D network architecture exhibits strong adsorption towards various antibiotic contaminants in water, where the stably embedded nZVI@Fe₂O₃ nanoparticles not only serve as magnetic seeds for recycling, but also avoid the shedding and oxidation of nZVI in the adsorption process. As a result, nZVI@Fe₂O₃/PC efficiently captures sulfamethoxazole (SMX), sulfamethazine (SMZ), ciprofloxacin (CIP), tetracycline (TC) and other antibiotics in water. In particular, an excellent adsorptive removal capacity of 329 mg g^-1 and a rapid capture kinetics (99% of removal efficiency in 10 min) under a wide pH adaptability (2-8) are achieved using nZVI@Fe₂O₃/PC as an SMX scavenger. nZVI@Fe₂O₃/PC displays exceptional long-term stability given that it shows excellent magnetic property after it is stored in water solution for 60 d, making it an ideal stable scavenger for contaminants in an etching-resistant and efficient manner. This work would also provide a general strategy to develop other stable iron-based functional architectures for efficient catalytic degradation, energy conversion and biomedicine.

Self-activation of potassium/iron citrate-assisted production of porous carbon/porous biochar composites from macroalgae for high-performance sorption of sulfamethoxazole

Excellent biochar properties are crucial for sorption performance, and a developed pore structure is especially important. Herein, novel porous carbon/porous biochar (PC/PB) composites, in which the porous biochar and porous carbon were prepared at the same time, were synthesized via a green method from algal biomass with the help of the self-activation of citrate for the first time, and the composites were evaluated for the sorption of sulfamethoxazole (SMX). Many micro/meso/macropores were introduced into the PC/PB composites, which showed high specific surface areas (up to 1415 m²/g) and pore volumes (up to 1.08 cm³ g^-1). The PC/PB composites displayed excellent SMX sorption capacities, which reached 844 mg g^-1. Pore filling played a crucial role in determining the sorption capacity, and hydrogen bonding, electrostatic interactions and π-π stacking controlled the sorption rate. This study provides an improved method for preparation of porous biochar.

A review on the applicability of adsorption techniques for remediation of recalcitrant pesticides

Pesticide has revolutionised the agricultural industry by reducing yield losses and by enhancing productivity. But indiscriminate usage of such chemicals can negatively impact human health and ecosystem balance as certain pesticides can be recalcitrant in nature. Out of some of the suggested sustainable techniques to remove the pesticide load from the environment, adsorption is found to be highly efficient and can also be implemented on a large scale. It has been observed that natural adsorption that takes place after the application of the pesticide is not enough to reduce the pesticide load, hence, adsorbents like activated carbon, plant-based adsorbents, agricultural by-products, silica materials, polymeric adsorbents, metal organic framework etc are being experimented upon. It is becoming increasingly important to choose adsorbents which will not leave any secondary pollutant after treatment and the cost of production of such adsorbent should be feasible. In this review paper, it has been established that certain adsorbent like biochar, hydrochar, resin, metal organic framework etc can efficiently remove pesticides namely chlorpyrifos, diazinon, 2,4-Dichlorophenoxyacetic Acid, atrazine, fipronil, imidacloprid etc. The mechanism of adsorption, thermodynamics and kinetic part have been discussed in detail with respect to the pesticide and adsorbent under discussion. The reason behind choosing an adsorbent for the removal of a particular pesticide have also been explained. It is further highly recommended to carry out a cost analysis before implementing an absorbent because inspite of its efficacy, it might not be cost effective to use it for a particular type of pesticide or contaminant.

Green, zero-waste pathway to fabricate supported nanocatalysts and anti-kinetoplastid agents from sugarcane bagasse

The conversion processes of sugarcane into direct-consumption sugar and juice are generating a tremendous amount of waste, the so-called sugarcane bagasse (SCB). Biochar preparation is among the practical solutions aiming to manage and valorize SCB into high added-value functional material (FM). Herein, we propose a novel zero-waste pathway to fabricate two FMs from one biomass. The SCB was first macerated and ultrasonicated to obtain the natural extract that served as bio-reducing medium. Then, the H₂O/EtOH-extracted SCB was in-situ impregnated with a bimetallic solution of copper and silver nitrates. The process produced an intermediate composite (FM₀), Ag/Cu-Ag⁺/Cu²⁺-loaded SCB which was carbonized to elaborate Ag/Cu-Biochar (FM₁), free Ag/Cu nanoparticles (FM₂) were obtained by microwaving the residual liquid waste. FM₁ exhibited high catalytic activity for the total Fenton-like degradation of methylene blue. The experimental data followed the pseudo-first and the pseudo-second order rate laws with apparent degradation rate constants K₁ 45 10^-3 min^-1 and K₂ 0.115 g.mg^-1.min^-1, respectively. FM₀, FM₁ and FM₂ were tested as new anti-kinetoplastid materials against two flagellated protozoans namely the Leishmania spp and the Trypanosoma cruzi. Notably, Ag/Cu (FM₂) showed exceptional leishmanicidal and trypanocidal effects with IC₅₀ values of 2.909 ± 0.051, 3.580 ± 0.016 and 3.020 ± 0.372 ppm for L.donovani, L. amazonensis and Trypanosoma cruzi, respectively. In this way, we combine green chemistry and agrowaste valorization in a full zero-waste process, to address the 3rd (indicator 3.3.5) and 6th (indicator 6.3.1) United Nations sustainable development goals, ″Good Health and Well-Being″ and ″Clean Water and Sanitation″.

One-Step Pyrolysis Fabrication of Magnetic Bagasse Biochar Composites with Excellent Lead Adsorption Performance

In the present study, a magnetically separable adsorbent, manganese ferrite (MnFe₂O₄)/sugarcane bagasse biochar magnetic composites (MFSCBB-MCs), was fabricated through a one-step pyrolysis method. The characterization of the prepared adsorbents indicated that MnFe₂O₄ nanoparticles were successfully embedded into the biochar matrix, offering magnetic separability and increasing the negative charges on the surface relative to the pristine biochar. Batch adsorption tests indicated that the adsorption of lead on MFSCBB-MCs was pH- and dose-dependent. The experimental results were effectively fitted using the pseudo-second-order kinetic model (R ² > 0.99) and the Langmuir isotherm equation (R ² > 0.99), indicating the main chemisorption pathway and monolayer coverage process. Meanwhile, lead adsorption was found to be spontaneous and endothermic, as shown by the study of thermodynamic parameters. The maximum capacity, q _m, calculated from the Langmuir model was 155.21 mg·g^-1 at 25 °C, demonstrating excellent adsorption capability compared with several previously reported bagasse adsorbents. Based on adsorption mechanism analysis, physical adsorption, electrostatic attraction, and complexation were all involved in the lead(II) adsorption process on MFSCBB-MCs. Furthermore, the adsorbent was easily regenerated as indicated by the high magnetic separation and chemical desorption potential after five cycles, so it is a cost-effective and environmentally favorable adsorbent for wastewater lead removal.

Sodium alginate/magnetic hydrogel microspheres from sugarcane bagasse for removal of sulfamethoxazole from sewage water: Batch and column modeling

Magnetic carbon were synthesized from sugarcane bagasse using hydrothermal carbonization followed by thermal activation was converted to solid state as beads (hydrogels SACFe) using sodium alginate and applied as adsorbent in removal sulfamethoxazole in batch and column mode. From adsorption parameter analysis it was confirmed that 0.6 g L^-1 SACFe was effective in removing 50 mg L^-1 of SMX at pH 6.2. Sorption of SMX on SACFe beads followed Elovich kinetics and Freundlich isotherm. It was further confirmed that sorption occurred on heterogeneous surface of SACFe beads with chemisorption as rate limiting step. Maximum adsorption capacity was obtained as 58.439 mg g^-1 pH studies revealed that charged assisted hydrogen bonding, EDA interactions are some of the mechanism that favoured removal of SMX. From column studies it was found that bead height of 2 cm and flow rate of 1.5 mL min^-1 found to be best in removing pollutant. Thomas model fitted better the experimental data stating that improved interaction between adsorbent and adsorbate act as major driving force tool in obtaining maximum sorption capacity. Breakthrough curve was completely affected by varied flow rate and bed height. Column adsorption was effective in reducing COD and BOD levels of sewage which are affected by toxic pollutants and miscellaneous compounds. Feasibility analysis showed that SACFe beads could be employed for real-time applications as it is cost, energy effective and easy recovery.