High surface area acid-treated biochar from pomegranate husk for 2,4-dichlorophenol adsorption from aqueous solution

Enhanced adsorption of phenolic compounds using biomass-derived high surface area activated carbon: Isotherms, kinetics and thermodynamics

The progress of industrial and agricultural pursuits, along with the release of inadequately treated effluents especially phenolic pollutant, has amplified the pollution load on environment. These organic compounds pose considerable challenges in both drinking water and wastewater systems, given their toxicity, demanding high oxygen and limited biodegradability. Thus, developing an eco-friendly, low-cost and highly efficient adsorbent to treat the organic pollutants has become an important task. The present investigation highlights development of a novel adsorbent (CFPAC) by activation of Cassia fistula pod shell for the purpose of removing phenol and 2,4-dichlorophnenol (2,4-DCP). The significant operational factors (dosage, pH, concentration, temperature, speed) were also investigated. The factors such as pH = 2 and T = 20°C were found to be significant at 1.6 g/L and 0.6 g/L dosage for phenol and 2,4-DCP respectively. Batch experiments were further conducted to study isotherms, kinetic and thermodynamics studies for the removal of phenol and 2,4-DCP. The activated carbon was characterised as mesoporous (specific surface area 1146 m2/g, pore volume = 0.8628 cc/g), amorphous and pHPZC = 6.4. At optimum conditions, the maximum sorption capacity for phenol and 2,4-DCP were 183.79 mg/g and 374.4 mg/g respectively. The adsorption isotherm was better conformed to Redlich Peterson isotherm (phenol) and Langmuir isotherm (2,4-DCP). The kinetic study obeyed pseudo-second-order type behaviour for both the pollutants with R2 > 0.999. The thermodynamic studies and the value of isosteric heat of adsorption for both the pollutants suggested that the adsorption reaction was dominated by physical adsorption (ΔHx < 80 kJ/mol). Further, the whole process was feasible, exothermic and spontaneous in nature. The overall studies suggested that the activated carbon synthesised from Cassia fistula pods can be a promising adsorbent for phenolic compounds.

Effect of dissolved oxygen on the peroxymonosulfate activation pathway in an electrochemical Co/P/CA cathode system

Although dissolved oxygen plays an important role in electro-Fenton-like processes, few investigations have revealed its underlying effects in such processes. Herein, the effect of dissolved oxygen on peroxide activation in an electro-Fenton-like system comprising electrochemical cells and peroxymonosulfate (PMS) was investigated. Cobalt phosphide-modified carbon aerogel (Co/P/CA) was used as the cathode material owing to the high conductivity and catalytic activity of Co/P/CA. Several free radicals and their effects on organic pollutant removal were observed using electron paramagnetic resonance spectrometry and quenching experiments, respectively. The observations revealed that in the presence of O2, hydroxyl radical (·OH), superoxide (O2-·), and singlet oxygen (1O2) served as the primary active species in the PMS activation process, while in the presence of N2, ·OH and sulfate radical (SO4-·) served as the dominant active species in this process. The factor responsible for the difference in the PMS activation pathways available under O2 and N2 conditions was investigated using rotating disk electrode tests and free energy calculations. The tests indicated that O2 facilitates PMS activation to form ·OH instead of SO4-·. The dissolved oxygen subsequently underwent a single-electron-reduction reaction and was converted into O2-·, which could serve as a source of 1O2. When N2 was introduced, Co species, particularly Co(II), played a key role in activating PMS. The free radicals ·OH and SO4-· were generated during the PMS activation process. This study clearly demonstrates the mediating catalysis role of dissolved oxygen in electro-Fenton-like system through experimental data and theoretical calculations, thereby positively contributing to future studies regarding the continuous activation of peroxides in composite systems and improvement of the efficiency of waterbody remediation.

Enhanced removal of acidic dyes (AB1 and MO) from binary systems using anion exchange membrane BII: kinetic, isotherm, and thermodynamic analyses

In the current work, the adsorption of acid black 1 (AB1), a hair dye, and methyl orange (MO) on anion exchange membrane BII (AEM-BII) in a binary system was studied experimentally. The effects study for contact time, adsorbent's and adsorbates' concentration, and temperature of aqueous media on the AB1 and MO removal, AEM-BII recovery, and reusability were also investigated. The highest removal was observed at optimum conditions, 150-min contact time and 5 g L-1 of adsorbent for AB1 (91.2%) and MO (83.4%). Adsorption kinetics was estimated by pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetics. The experimental findings were fitted well by PSO kinetics with an adsorption capacity of 19.45 ± 0.93 and 19.34 ± 0.84 mg g-1 for ABI and MO, respectively. Moreover, the adsorption isotherm study confirmed that AB1 and MO adsorption by AEM-BII from the binary system was followed by Langmuir isotherms. Adsorption thermodynamics revealed that adsorption of both AB1 and MO by AEM-BII was endothermic and spontaneous. Moreover, the desorption phenomenon of ABI and MO from the loaded AEM-BII showed that dye removal from AEM-BII was found to be 74.95%, demonstrating AEM-BII can be considered as good adsorbent for acidic dyes from the binary system.

Highly Efficient Adsorption of Norfloxacin by Low-Cost Biochar: Performance, Mechanisms, and Machine Learning-Assisted Understanding

This study employed potassium carbonate (K2CO3) activation using ball milling in conjunction with pyrolysis to produce biochar from one traditional Chinese herbal medicine Atropa belladonna L. (ABL) residue. The resulting biochar KBC800 was found to possess a high specific surface area (S BET = 1638 m2/g) and pore volume (1.07 cm3/g), making it effective for removing norfloxacin (NOR) from wastewater. Batch adsorption tests confirmed its effectiveness in eliminating NOR, along with its excellent resistance to interference from impurity ions or antibiotics. Notably, the maximum experimental NOR adsorption capacity on KBC800 was 666.2 mg/g at 328 K, surpassing those of other biochar materials reported. The spontaneous and endothermic adsorption of NOR on KBC800 could be better suited to the Sips model. Additionally, KBC800 adsorbs NOR mainly by pore filling, with electrostatic attraction, π-π EDA interactions, and hydrogen bonds also contributing significantly. The machine learning model revealed that NOR adsorption on the biochar was significantly affected by the initial concentration, followed by S BET and average pore size. Based on the random forest model, it is demonstrated that biochar is able to adsorb NOR effectively. It is noteworthy that the use of low-cost pharmaceutical wastes to produce adsorbents for emerging contaminants such as antibiotics could have greater potential for future practical applications under the ongoing dual carbon policy.

Functionalization of carbon from rubber fruit shells (Hevea brasiliensis) with silane agents and its application to the adsorption of bi-component mixtures of methylene blue and crystal violet

In this research, activated carbon was obtained from rubber fruit shells (ACRPs). The obtained activated carbon (ACRPs) was modified by magnetite particle coating and silanization with triethoxyiphenylsilane (TEPS) to produce a new magnetic adsorbent (ACRPs-MS). The affinity of as-prepared adsorbent (ACRPs-MS) toward methylene blue (MB) and crystal violet (CV) dyes was tested in mono-component and bi-component solutions. Structural characterization proves the success of the magnetite coating process and the silanization of ACRPs. In the infrared (IR) spectroscopy spectrum of ACRPs-MS, Si-O-Fe and Si-O-Si bonds were identified, which indicated the presence of magnetite and silane. This is also supported by the elemental composition contained in the energy-dispersive X-ray (EDX) diffractogram. In addition, the presence of the porous structure of the surface of the material and the increase in the specific surface area increase the accessibility of contaminants such as MB and CV dyes to be adsorbed to the ACRPs-MS adsorption site effectively. The experimental results showed that the adsorption of mono-component MB and CV dyes by ACRPs-MS was optimum at pH 8 and an interaction time of 60 min. The adsorption kinetics of mono-component MB and CV dyes by ACRPs-MS tended to follow pseudo-second-order kinetics (PSO) models with PSO rate constant (k2) values of 0.198 and 0.993 g mg-1 min-1, respectively. The adsorption of MB and CV dyes by ACRPs-MS in a bi-component mixture tends to follow the Langmuir isotherm model with adsorption capacity (qm) values of 85.060 and 90.504 mg g-1, respectively. Analysis of adsorption data on the bi-component mixture between MB and CV by ACRPs-MS with the Langmuir isotherm equation for a binary mixture resulted in qm of 22.645 × 10-3 mmol equiv g-1. ACRPs-MS material can be used repeatedly five times with adsorption ability > 80%. Desorption of MB and CV dyes was carried out using 0.05 M HCl solution. ACRPs-MS material was able to adsorb MB and CV dyes with a large adsorption capacity and could be used in repeated adsorption. Thus, it can be stated that ACRPs-MS can be used as an effective adsorbent for MB and CV dyes, either singly or in a bi-component mixture.

New insights on the decolorization of waste flows by Saccharomyces cerevisiae strain - A systematic review

One of the common causes of water pollution is the presence of toxic dye-based effluents, which can pose a serious threat to the ecosystem and human health. The application of Saccharomyces cerevisiae (S. cerevisiae) for wastewater decolorization has been widely investigated due to their efficient removal and eco-friendly treatments. This review attempts to create an awareness of different forms and methods of using Saccharomyces cerevisiae (S. cerevisiae) for wastewater decolorization through a systematic approach. Overall, some suggestions on classification of dyes and related environmental/health problems, and treatment methods are discussed. Besides, the mechanisms of dye removal by S. cerevisiae including biosorption, bioaccumulation, and biodegradation and cell immobilization methods such as adsorption, covalent binding, encapsulation, entrapment, and self-aggregation are discussed. This review would help to inspire the exploration of more creative methods for applications and modification of S. cerevisiae and its further practical applications.

Mesoporous bimetallic S-doped nanoparticles prepared via hydrothermal method for enhanced photodegradation of 4-chlorophenol

Magnesium oxides (MgO) have gained shown significant promise for a variety of applications, which can be modified by ions doping. In this study, bimetallic Ag-doped S-MgO nanoparticles were prepared by hydrothermal method and used for photocatalytic degradation of 4-chlorophenl (4-CP). EDX suggested the presence of no impurities, which mainly contained Mg, Ag, and S elements, suggesting that S and Ag were incorporated into the lattice of MgO as a result of successful doping. Estimated bandgap of Ag-doped S-MgO nanoparticles was 3.7 eV, lower than MgO (7.8 eV), but useful to improve optical characteristics and photocatalytic efficiency to degrade 4-CP up to a maximum of 99.60 ± 0.50%. The synergetic parameter during photocatalysis of 4-CP was 6.91, confirming the degradation of 4-CP. Quenching experiments proved the presence of hydroxyl radicals (•OH) and singlet dioxygen (1O2) that were critical in 4-CP degradation. The kinetics rate constant was increased by 24.8% from 0.086 ± 0.004 to 0.108 ± 0.005 min-1 by the addition of sulfate in the reaction medium. The work proposes a new synthetic method for preparing catalysts that are capable of producing in-situ •OH radicals and 1O2 to decompose the organic contaminants.

Development of ultra-high surface area polyaniline-based activated carbon for the removal of volatile organic compounds from industrial effluents

Removing volatile organic compounds (VOCs) from aqueous solutions is critical for reducing VOC emissions in the environment. Activated carbons are widely used for removal of VOCs from water. However, they show less application feasibility and low removal due to less surface area. Here, a cost-effective and high surface area activated carbonized polyaniline (ACP) was synthesized to sustainable removal of VOCs from water. The ACP microstructure, surface properties, and pore structure were investigated using Brunauer-Emmett-Teller (BET) theory, Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The specific surface area of ACP6:1 (2988.13 m2/g) was greater than that of commercial activated carbon (PAC) (1094.49 m2/g), indicating that it has excellent VOC adsorption capacity. The effects of pH, initial VOC concentration, time, temperature, and ionic strength were studied. According to kinetic and thermodynamic studies on VOCs adsorption, it is an exothermic and spontaneous process involving rate-limiting kinetics. Adsorption isotherms follow the Freundlich isotherm model, suggesting that the adsorbent surface is heterogeneous with multilayer adsorption and maximum ACP adsorption capacities of 1913.9, 2453.3, 1635.8, and 3327.0 mg/g at 293 K for benzene, toluene, ethylbenzene, and perchloroethylene, respectively, representing a 3- to 5-fold improvement over PAC. ACP is a promising adsorbent with a high adsorption efficiency for VOC removal.

Comprehensive dataset on fluoride removal from aqueous solution by enhanced electrocoagulation process by persulfate salts

Depending on the quantity and concentration, drinking water containing fluoride (F-) ions can have either favorable or unfavorable impacts on individuals and the environment. High levels of F- (over 2 to 4 mg/L) can cause skeletal problems, dental fluorosis, and brain damage in children. Conventional F- removal is often complex and thus causes an adverse effect on the environment and financial burdens. The use of persulfate salts to enhance the electrocoagulation process is one of the most recent advances in the removal of F- from water. To investigate the efficacy of F- removal, a laboratory-scale electrochemical batch reactor with iron and aluminum electrodes was employed with various persulfate doses, pH values, current intensities, and supporting electrolyte concentrations. It was observed that the performance of the enhanced electrocoagulation process by persulfate increased over time, and it worked well in a certain range of pH. Also, for the initial F- concentration of 10 mg/L, increasing the supporting electrolyte concentration to 1.5 g/L improved fluoride removal efficiency from 80 to 91.2%, but higher concentrations (2.5 g/L) reduced efficiency to 71%. The most effective removal of F- was found to occur at a persulfate dose of 0.2 mg/L. At this dose, F- removal efficiency exceeded 92% for all studied F- concentrations. Overall, electrocoagulation using persulfate salts proved more efficient than electrocoagulation alone at removing fluoride from water sources.

Efficient removal of pharmaceutical contaminants from water and wastewater using immobilized laccase on activated carbon derived from pomegranate peels

In this study, pomegranate peels (PPs) as an abundant fruit processing waste was used to produce cost-effective, eco-friendly, and high-quality activated carbon. The produced carbon (fossil free activated carbon) was used for immobilizing laccase to remove a range of emerging pollutants namely diclofenac, amoxicillin, carbamazepine, and ciprofloxacin from water and wastewater. The loaded activated carbon by laccase (LMPPs) and the unloaded one (MPPs) were characterized using advanced surface chemistry analysis techniques. MPPs was found to have a porous structure with a large surface area and an abundance of acidic functional groups. Laccase immobilization reduced surface area but added active degradation sites. The optimal immobilization parameters were determined as pH 4, 35 °C, and a laccase concentration of 2.5 mg/mL resulting in a 69.8% immobilization yield. The adsorption of the emerging pollutant onto MPPs is best characterized as a spontaneous endothermic process that adheres to the Langmuir isotherm and first-order kinetics. Using synergistic adsorption and enzymatic degradation, the target pollutants (50 mg/L) were eliminated in 2 h. In both water types, LMPPs outperformed MPPs. This study shows that pomegranate peels can effectively be harnessed as an enzyme carrier and adsorbent for the removal of emerging pollutants even from a complex sample matrix. The removal of contaminants from wastewater lasted five cycles, whereas it continued up to six cycles for water.

Quantitative analysis of the current status and research trends of biochar research - A scientific bibliometric analysis based on global research achievements from 2003 to 2023

Biochar has excellent physical and chemical properties such as porosity, high carbon content, high cation exchange capacity, and rich surface functional groups and has been widely used in environmental remediation. Over the past 20 years, although various reviews have described the application of biochar as an environmentally friendly multifunctional material in environmental remediation, no comprehensive summary and analysis of the research trends in this field exists. To promote the rapid and stable development of the field of biochar, the current state of research on biochar is clarified using the bibliometric method in this report, and potential development directions and challenges for the future are identified. All relevant biochar literature from 2003-2023 was collected from the Chinese National Knowledge Infrastructure and Web of Science Core Collection. A total of 6,119 published Chinese papers and 25,174 English papers were selected for the quantitative analysis. CiteSpace, VOSviewer, and Scimago graphics software was used to summarize the numbers of papers published over the years, as well as the countries, institutions, and authors that published the most articles. Secondly, using keyword co-occurrence and emergence analysis, the recognized research hotspots in different areas such as adsorbents, soil remediation, catalytic oxidation, supercapacitors, and "biochar-microbial" synergy were analyzed. Finally, the prospects and challenges of biochar were assessed to provide new perspectives for further promoting its development in technological, economic, environmental, and other aspects.

Adsorption of sulfanilamides using biochar derived from Suaeda salsa: adsorption kinetics, isotherm, thermodynamics, and mechanism

Suaeda biochar (SBC) was prepared by muffle furnace with Suaeda salsa at 600, 700, 800, and 900 ℃. The physical and chemical properties of biochar at different pyrolysis temperatures and the adsorption mechanism of sulfanilamide (SM) were studied by SEM-EDS, BET, FTIR, XRD, and XPS analysis. The adsorption kinetics and adsorption isotherms were fitted. The results showed that the kinetics was in line with the quasi-second-order adsorption model and belonged to chemisorption. The adsorption isotherm conformed to Langmuir adsorption isotherm model and belonged to monolayer adsorption. The adsorption of SM on SBC was spontaneous and exothermic. The adsorption mechanism may be pore filling, hydrogen bonding, and π-π electron donor acceptor (EDA) interaction.

Degradation of 2,4-diclorophenol via coupling zero valent iron and hydrodynamic cavitation for sulfite activation: A turbulence modeling

The 2,4-dichlorophenol (2,4-DCP) is an important chemical precursor that can affect human endocrine system and induce pathological symptoms. This research reports the degradation of 2,4-DCP using lab-scale hydrodynamic cavitation (HC) approach, which is considered a green and effective method. To promote the degradation efficiency, the zero-valent iron (Fe⁰) as the catalyst for sulfate radical (SO₄^•-) generation via activation of sulfite (SO₃^2-) salts was simultaneously used. Degradation efficiency was favorable in acidic pH than the alkaline pH due to higher production of active radicals and was dependent on the dose of Fe⁰ and SO₃^2-. Under optimal condition, degradation efficiency by Fe⁰/HC/sulfite (96.67 ± 2.90%) was considerably enhanced compared to HC alone (45.37 ± 2.26%). Quenching experiments suggested that SO₄^•-, ^•OH, ¹O₂, and O₂^•- radicals were involved in the degradation of 2,4-DCP by Fe⁰/HC/sulfite process, but the dominant role was related to ^•OH (70.09% contribution) and SO₄^•- (29.91% contribution) radicals. From the turbulence model, turbulent pressure at venturi throat decreased from -0.42 MPa to -2.02 MPa by increasing the inlet pressure from 1.0 to 4.0 bar and increase in pressure gradient has intensified bubble collapse due to higher turbulence tension.

Methylene blue removal from aqueous solutions using a biochar/gellan gum hydrogel composite: Effect of agitation mode on sorption kinetics

Hydrogel membranes are prepared by casting a mixture of gellan gum (associated with PVA) and biochar produced from a local Egyptian plant. The mesoporous material is characterized by a specific surface area close to 134 m² g^-1, a residue of 28 % (at 800 °C), and a pH_PZC close to 6.43. After grinding, the material is tested for Methylene Blue sorption at pH 10.5: sorption capacity reaches 1.70 mmol MB g^-1 (synergistic effect of the precursors). The sorption isotherms are fitted by both Langmuir and Sips eqs. MB sorption increases with temperature: the sorption is endothermic (∆H°: 12.9 kJ mol^-1), with positive entropy (∆S°: 125 J mol^-1 K^-1). Uptake kinetics are controlled by agitation speed (optimum ≈200 rpm) and resistance to intraparticle diffusion. The profiles are strongly affected by the mode of agitation: the equilibrium time (≈180 min) is reduced to 20-30 min under sonication (especially at frequency: 80 kHz). The mode of agitation controls the best fitting equation: pseudo-first order rate agitation for mechanical agitation contrary to pseudo-second order rate under sonication. The sorption of MB is poorly affected by ionic strength (loss <6 % in 45 g L^-1 NaCl solution). Desorption (faster than sorption) is completely achieved using 0.7 M HCl solution. At the sixth recycling, the loss in sorption is close to 5 % (≈ decrease in desorption efficiency). The process is successfully applied for the treatment of MB-spiked industrial solution: the color index decreases by >97 % with a sorbent dose close to 1 g L^-1; a higher dose is required for maximum reduction of the COD (60 % at 3 g L^-1).

Cellulose Fiber Rejects as Raw Material for Integrated Production of Pleurotus spp. Mushrooms and Activated Biochar for Removal of Emerging Pollutants from Aqueous Media

Cellulose fiber rejects from industrial-scale recycling of waste papers were dried and de-ashed using a combined cyclone-drying and sieving process. The upgraded fiber reject was used as a component of substrates for the cultivation of Pleurotus ostreatus and Pleurotus eryngii mushrooms. Acetic acid (AA) and acid whey (AW) were used to adjust the pH of fiber reject-based substrates. Spent substrate (SMS) was used for the production of activated biochar using H₃PO₄ and KOH as activating agents and pyrolysis temperatures of 500, 600, and 700 °C. The effectiveness of the biochars in removing pollutants from water was determined using acetaminophen and amoxicillin. By using a feeding rate of 250 kg/h and a drying air temperature of 70 °C, the moisture content of the raw fiber rejects (57.8 wt %) was reduced to 5.4 wt %, and the ash content (39.2 wt %) was reduced to 21.5 wt %. Substrates with 60 and 80 wt % de-ashed cellulose fiber were colonized faster than a birch wood-based control substrate. The adjustment of the pH of these two substrates to approximately 6.5 by using AA led to longer colonization times but biological efficiencies (BEs) that were higher or comparable to that of the control substrate. The contents of ash, crude fiber, crude fat, and crude protein of fruit bodies grown on fiber reject-based substrates were comparable to that of those grown on control substrates, and the contents of toxic heavy metals, that is, As, Pb, Cd, and Hg, were well below the up-limit values for food products set in EC regulations. Activated biochar produced from fiber reject-based SMS at a temperature of 700 °C resulted in a surface area (BET) of 396 m²/g (H₃PO₄-activated biochar) and 199 m²/g (KOH-activated biochar). For both activated biochars, the kinetics of adsorption of acetaminophen and amoxicillin were better described using the general order model. The isotherms of adsorption were better described by the Freundlich model (H₃PO₄-activated biochar) and the Langmuir model (KOH-activated biochar).

Activated peroxydisulfate by sorghum straw-based biochar for enhanced tartrazine degradation: Roles of adsorption and radical/nonradical processes

Biochar obtained from biomass waste through pyrolysis has significant potential in wastewater treatment due to its large specific surface area and multi-functional active sites. In current study, sorghum straw (SS) was pyrolyzed to prepare various biochar under nitrogen atmosphere. Adsorption kinetics of prepared biochar toward tartrazine (TTZ) was systematically investigated, and the biochar was also characterized by using multiple techniques to explore the contribution of physicochemical properties to adsorption. Then, the biochar with optimum TTZ adsorption performance, was also applied as a catalyst for peroxydisulfate (PDS) activation to degrade TTZ. Factors including PDS concentration, solution pH, and reaction temperature were examined. The optimized degradation rate constant of TTZ (1.1627 min^-1) was achieved under the conditions at 2 mM PDS, pH of 3, and 23 °C. In addition, the free radical trapping experiments and EPR spectra revealed that the reactive substances of electron (e^-), ¹O₂, SO₄^•-, O₂^•-, and •OH contributed to TTZ degradation. Density Functional Theory (DFT) also concluded that the atoms C(6), O(12), N(16), N(17), C(18) and N(22) in TTZ molecule showed larger f⁰ values which are vulnerable to radical attack. Therefore, the synergistic mechanism embodying adsorption and radical/non-radical processes were proposed. Besides, the degradation pathways of TTZ were identified with the aid of HPLC/MS technique, indicating that multiple reaction processes containing the symmetrical cleavage of azo bonds, the asymmetrical cleavage of C-N, desulfonation, and benzene-like structure cracking were involved. Therefore, this study provides a simple and effective catalytic system for TTZ degradation, and also realizes the resource utilization of solid waste.