Enhanced removal of fluoride, nitrate, and calcium using self-assembled fungus-flexible fiber composite microspheres combined with microbially induced calcium precipitation

The Constructing of the Oxide Phase Diagram for Fluoride Adsorption on La-Fe-Al: A Collaborative Study of Density Functional Calculation and Experimentation

In recent years, fluoride pollution in water is a problem that has attracted much attention from researchers. The removal of fluoride-containing wastewater by adsorption with metal oxide as an adsorbent is the most common treatment method. Based on this, the effect of the doping ratio of La2O3, Fe2O3, and Al2O3 on the fluoride-removal performance was discussed by constructing a phase diagram. In this study, the adsorption mechanism of nanocrystalline lanthanum oxide terpolymer was investigated by density functional theory calculation and experiment. The optimal pH condition selected in the experiment was three, and the adsorption kinetics of fluoride ions were more consistent with the quasi-second-order kinetic model. The adsorption thermodynamics was more consistent with the Langmuir model. When the La-Fe-Al ternary composite oxides achieved the optimal adsorption efficiency for fluoride ions, the mass synthesis ratio was Al2O3:(Fe2O3:La2O3 = 1:2) = 1:100, resulting in a fluoride ion removal rate of up to 99.78%. Density functional calculations revealed that the La-Fe-Al ternary composite oxides had three important adsorption sites for La, Fe, and Al. Among them, the adsorption capacity for HF was Fe2O3 > La2O3 > Al2O3, and for F- was La2O3 > Al2O3 > Fe2O3. This provided good guidance for designing adsorbents to remove fluoride.

Kinetic analysis and mechanism of nitrate, calcium, and cadmium removal using the newly isolated Pseudomonas sp. LYF26

The co-existence of heavy metals and nitrate (NO3--N) pollutants in wastewater has been a persistent global concern for a long time. A strain LYF26, which can remove NO3--N, calcium (Ca(II)), and cadmium (Cd(II)) simultaneously, was isolated to explore the properties and mechanisms of synergistic contaminants removal. Different conditions (Cd(II) and Ca(II) concentrations and pH) were optimized by Zero-, Half-, and First-order kinetic analyses to explore the environmental parameters for the optimal effect of strain LYF26. Results of the kinetic analyses revealed that the optimal culture conditions for strain LYF26 were pH of 6.5, Cd(II) and Ca(II) concentrations of 3.00 and 180.00 mg L-1, accompanied by Ca(II), Cd(II), and NO3--N efficiencies of 53.10%, 90.03%, and 91.45%, respectively. The removal mechanisms of Cd(II) using strain LYF26 as a nucleation template were identified as biomineralization, lattice substitution, and co-precipitation. The differences and changes of dissolved organic matter during metabolism were analyzed and the results demonstrated that besides the involvement of extracellular polymeric substances in the precipitation of Cd(II) and Ca(II), the high content of humic acid-like species revealed a remarkable contribution to the denitrification process. This study is hopeful to contribute a theory for further developing microbially induced calcium precipitation used to treat complex polluted wastewater.

Immobilized bioreactor for enhanced ammonia, phosphorus, and phenol removal and effects of phenol on microbial communities, potential functions, and nitrogen metabolism

In the present study, an immobilized bioreactor was established to remove ammonia (NH4+-N), phosphate (PO43--P), and phenol using composite mycelium spheres (CMP) as the immobilization material in combination with Pseudomonas sp. Y1. Under optimal operating conditions, the bioreactor achieved 98.07, 91.71, and 92.57 % removal of NH4+-N, PO43--P, and phenol, respectively. The results showed that the bioreactor removed PO43--P by biomineralization and co-precipitation. Phenol removal relied on a Fenton-like reaction achieved by CMP-induced quinone redox cycling. High-throughput sequencing analysis and functional gene prediction indicated that Pseudomonas was the dominant genus and that the bioreactor had much potential for nitrogen removal, respectively. In addition, phenol affected the performance of functional genes and the associated enzymes, which influenced the nitrogen metabolism process in the bioreactor. This work serves as a guideline for the development of more stable and sustainable composite pollution removal technologies and fungal-bacterial symbiotic systems.

Applying the first microcapsule-based self-healing microbial-induced calcium carbonate materials to prevent the migration of Pb ions

Lead (Pb) accumulation can lead to serious threats to surrounding environments and damage to the liver and kidneys. In the past few years, microbial-induced carbonate precipitation (MICP) technology has been widely applied to achieve Pb immobilization due to its environmentally friendly nature. However, harsh pH conditions can cause the instability of the carbonate precipitation to degrade or dissolve, increasing the potential of Pb2+ migration into nearby environments. In this study, microcapsule-based self-healing microbial-induced calcium carbonate (MICC) materials were applied to prevent Pb migration. The highest sporulation rate of 95.8% was attained at 7 g/L yeast extract, 10 g/L NH4Cl, and 3.6 g/L Mn2+. In the germination phase, the microcapsule not only prevented the bacterial spores from being threatened by the acid treatment but secured their growth and reproduction. Micro analysis also revealed that cerussite, calcite, and aragonite minerals were present, while extracellular polymeric substances (EPSs) were identified via Fourier transform infrared spectroscopy (FTIR). These results confirm their involvement in combining Pb2+ and Ca2+. The immobilization efficiency of above 90% applied to MICC materials was attained, while it of below 5% applied to no MICC use was attained. The findings explore the potential of applying microcapsule-based self-healing MICC materials to prevent Pb ion migration when the calcium carbonate degrades under harsh pH conditions.

Simultaneous removal of phosphate, calcium, and ammonia nitrogen in a hydrogel immobilized reactor with bentonite/lanthanum/PVA based on microbial induced calcium precipitation

In recent years, it is urgent to solve nitrogen and phosphorus pollution in domestic wastewater. The target strain Pseudomonas sp. Y1 was immobilized using polyvinyl alcohol (PVA) matrix coupled with bentonite and lanthanum (La), respectively, to fabricate four hydrogel materials that used to construct bioreactors. The optimal operating parameters and dephosphorization mechanism were discussed, and the effects of hydrogel materials and different loads on the performance of the bioreactor were contrastively analyzed. The results manifested that when the hydraulic retention time (HRT) was 6.0 h, the C/N was 6.0, and the Ca²⁺ concentration was 100.0 mg L^-1, the bioreactors had the best heterotrophic nitrification-aerobic denitrification (HNAD) and biomineralization capacity, and the maximum removal efficiencies of Ca²⁺, PO₄^3--P, and NH₄⁺-N were 82.57, 99.17, and 89.08%, respectively. The operation data indicated that the addition of bentonite significantly promoted HNAD, and the bioreactor had stronger dephosphorization ability in the presence of La. The main phosphorous removal mechanisms were confirmed to be adsorption and co-precipitation. Finally, high-throughput sequencing results indicated that Pseudomonas accounted for the paramount proportion in the bioreactor, and the prediction of functional genes indicated that the C/N of 6.0 is more favorable for the expression of nitrogen removal-related functional genes in the bioreactor system. This study highlights the superiority of microbial induced calcium precipitation (MICP) combined with PVA hydrogel, and provides a theoretical basis for simultaneous nitrogen and phosphate removal of wastewater.

Investigating immobilization efficiency of Pb in solution and loess soil using bio-inspired carbonate precipitation

Lead (Pb) metal accumulation in surrounding environments can cause serious threats to human health, causing liver and kidney function damage. This work explored the potential of applying the MICP technology to remediate Pb-rich water bodies and Pb-contaminated loess soil sites. In the test tube experiments, the Pb immobilization efficiency of above 85% is attained through PbCO₃ and Pb(CO₃)₂(OH)₂ precipitation. Notwithstanding that, in the loess soil column tests, the Pb immobilization efficiency decreases with the increase in depth and could be as low as approximately 40% in the deep ground. PbCO₃ and Pb(CO₃)₂(OH)₂ precipitation has not been detected as the majority of Pb²⁺ combines with -OH (hydroxyl group) when subjected to 500 mg/kg Pb²⁺. The alkaline front promotes the chemisorption of Pb²⁺ with CO₃^2- reducing the depletion of quartz mineral close to the surface. However, OH^- is in shortage in the deep ground retarding the Pb immobilization. The Pb immobilization efficiency thus decreases with the increase in depth. Quartz and albite minerals, when subjected to 16,000 mg/kg Pb²⁺, appear not to intervene in the chemisorption with Pb²⁺ where the chemisorption of Pb²⁺ with CO₃^2- plays a major role in the Pb immobilization. Compared to the nanoscale urease applied to the enzyme-induced carbonate precipitation (EICP) technology, the micrometer scale ureolytic bacteria penetrate into the deep ground with difficulty. The 'size' issue remains to be addressed in near future.

Current Trends in Bioaugmentation Tools for Bioremediation: A Critical Review of Advances and Knowledge Gaps

Bioaugmentation is widely used in soil bioremediation, wastewater treatment, and air biofiltration. The addition of microbial biomass to contaminated areas can considerably improve their biodegradation performance. Nevertheless, analyses of large data sets on the topic available in literature do not provide a comprehensive view of the mechanisms responsible for inoculum-assisted stimulation. On the one hand, there is no universal mechanism of bioaugmentation for a broad spectrum of environmental conditions, contaminants, and technology operation concepts. On the other hand, further analyses of bioaugmentation outcomes under laboratory conditions and in the field will strengthen the theoretical basis for a better prediction of bioremediation processes under certain conditions. This review focuses on the following aspects: (i) choosing the source of microorganisms and the isolation procedure; (ii) preparation of the inoculum, e.g., cultivation of single strains or consortia, adaptation; (iii) application of immobilised cells; (iv) application schemes for soil, water bodies, bioreactors, and hydroponics; and (v) microbial succession and biodiversity. Reviews of recent scientific papers dating mostly from 2022-2023, as well as our own long-term studies, are provided here.

Dummy-template Pickering emulsion imprinted microspheres online pretreatment and analysis for the estrogens in cosmetics

Estrogens are a class of steroid hormone with strong physiological activity. Due to the pronounced beauty effect, such drugs are highly susceptible to illegal addition and cause other adverse effects. To avoid template leakage and the negative impacts on the environment caused by the estrogens, diosgenin was selected as the dummy template due to its similar skeleton structure. The Pickering emulsion polymerization was used to obtain the dummy-template molecularly imprinted polymers (dt-MIPs). Scanning electron microscopy, optical microscopy, specific surface area testing, Fourier transform infrared spectroscopy and adsorption experiments were used to characterize the apparent morphology and the recognition performance of the microspheres. Then, the prepared microspheres and commercial fillers were used to construct an on-line solid phase extraction (on-line SPE) analytical system coupled with HPLC via a two-position switching valve. On-line solid phase extraction-HPLC analytical methods were established and verified, for the simultaneous determination of four estrogens in cosmetic samples. The accuracy and precision RSDs for the established methods using the imprinted sorbents were 92.00-104.02% and less than 9.12%, respectively. All four estrogens exhibited good linearity in the range of 0.05 to 5 µg/mL with a coefficient of determination R² greater than 0.9810. The method comparison results suggest that the established analytical method is simple in pre-treatment, easy to automate, and has excellent sensitivity to meet the analytical requirements of complex samples.

Microbial-induced calcium carbonate precipitation: Influencing factors, nucleation pathways, and application in waste water remediation

Microbial-induced calcium carbonate precipitation (MICP) is a technique that uses the metabolic action of microorganisms to produce CO₃^2- which combines with free Ca²⁺ to form CaCO₃ precipitation. It has gained widespread attention in water treatment, aimed with the advantages of simultaneous removal of multiple pollutants, environmental protection, and ecological sustainability. This article reviewed the mechanism of MICP at both intra- and extra-cellular levels. It summarized the parameters affecting the MICP process in terms of bacterial concentration, ambient temperature, etc. The current status of MICP application in practical engineering is discussed. Based on this, the current technical difficulties faced in the use of MICP technology were outlined, and future research directions for MICP technology were highlighted. This review helps to improve the design of existing water treatment facilities for the simultaneous removal of multiple pollutants using the MICP and provides theoretical reference and innovative thinking for related research.

Immobilizing of lead and copper using chitosan-assisted enzyme-induced carbonate precipitation

Enzyme-induced carbonate precipitation (EICP) is considered as an environmentally friendly method for immobilizing heavy metals (HMs). The fundamental of the EICP method is to catalyze urea hydrolysis using the urease, discharging CO₃^2- and NH₄⁺. CO₃^2- helps to form carbonates that immobilize HMs afterwards. However, HMs can depress urease activity and reduce the degree of urea hydrolysis. Herein, the potential of applying the chitosan-assisted EICP method to Pb and Cu immobilization was explored. The chitosan addition elevated the degree of urea hydrolysis when subjected to the effect of Cu²⁺ toxicity where the protective effect, flocculation and adsorption, and the formation of precipitation, play parts in improving the Cu immobilization efficiency. The use of chitosan addition, however, also causes the side effect (copper-ammonia complex formation). Two calcium source additions, CaCl₂ and Ca(CH₃COO)₂, intervened in the test tube experiments not only to prevent pH from raising to values where Cu²⁺ complexes with NH₃ but also to separate the urease enzyme and Cu²⁺ from each other with the repulsion of charges. The FTIR spectra indicate that the chitosan addition adsorbs Cu²⁺ through its surface hydroxyl and carboxyl groups, while the SEM images distinguish who the mineral are nucleating with. The findings shed light on the potential of applying the chitosan-assisted EICP method to remedy lead- and copper-rich water bodies.

Immobilizing copper in loess soil using microbial-induced carbonate precipitation: Insights from test tube experiments and one-dimensional soil columns

Biomineralization as an alternative to traditional remediation measures has been widely applied to remediate copper (Cu)-contaminated sites due to its environmental-friendly nature. Immobilizing Cu is, however, a challenging task as it inevitably causes inactivation of ureolytic bacteria. In the present work, a series of test tube experiments were conducted to derive the relationships of Cu immobilization efficiency versus pH conditions. The Cu speciation transformation that is invisible in the test tube experiments was investigated via numerical simulations. Apart from that, the one-dimensional soil column tests, accompanied by the X-ray diffraction (XRD) and Raman spectroscopy analysis, mainly aimed not only to investigate the variations of Cu immobilization efficiency with the depth but to reveal the underlying mechanisms affecting the Cu immobilization efficiency. The results of the test tube experiments highlight the necessity of narrowing pH ranges to as close as 7 by introducing an appropriate bacterial inoculation proportion. The coordination adsorption of Cu, while performing the one-dimensional soil column tests, is encouraged by alkaline environments, which differs from the test tube experiments where Cu²⁺ is capsulized by carbonate precipitates to prevent their migration. The findings highlight the potential of applying the microbial-induced carbonate precipitation (MICP) technology to Cu-rich water bodies and Cu-contaminated sites remediation.

Microbially induced calcium precipitation coupled with medical stone-coated sponges: A targeted strategy for enhanced nitrate and fluoride removal from groundwater

The coexistence of nitrate and fluoride in groundwater is of high concern due to its potential environmental impacts and health risks. Medical stone-coated sponges, as a microbial activity promoter and slow-release calcium source, were introduced into an immobilized bioreactor for enhanced removal of nitrate and fluoride. Under the hydraulic retention time of 3 h, nitrate, fluoride, and calcium contents of 16.5, 3.0, and 100 mg L^-1, the average removal efficiencies of nitrate, fluoride, and calcium reached 99.49%, 74.26%, and 70.43%, respectively. Co-precipitation and chemisorption were the mechanisms for fluoride and calcium removal. Medical stone load improved the competitiveness of dominant bacteria and electron transport activity, accelerated the denitrification process, and stimulated biofilm formation. High fluoride level (5.0 mg L^-1) inhibited the nitrate removal and aromatic protein production. The fluoride content changes altered the carbon source preference of the microbial community, which preferred to use amino acids and carbohydrates under a higher fluoride content. The introduction of medical stones significantly accelerated the fluoride and nitrate removal, providing a new insight for the application of microbially induced calcium precipitation technique in the remediation of low-calcium groundwater.

Enhanced nitrate and cadmium removal performance at low carbon to nitrogen ratio through immobilized redox mediator granules and functional strains in a bioreactor

The coexistence of multiple pollutants and lack of carbon sources are challenges for the biological treatment of wastewater. To achieve simultaneous removal of nitrate (NO₃^--N) and cadmium (Cd²⁺) at low carbon to nitrogen (C/N) ratios, 2-hydroxy-1,4-naphthoquinone (HNQ) was selected from three redox mediators as an accelerator for denitrification of heterotrophic strain Pseudomonas stutzeri sp. GF2 and autotrophic strain Zoogloea sp. FY6. Then, halloysite nanotubes immobilized with 2-hydroxy-1,4-naphthoquinone (HNTs-HNQ) were prepared and a bioreactor was constructed with immobilized redox mediator granules (IRMG) as the carrier, which was immobilized with HNTs-HNQ and inoculated with the two strains. The immobilized HNQ and the inoculated strains jointly improved the removal ability of NO₃^--N and Cd²⁺ and the removal efficiency of NO₃^--N (25.0 mg L^-1) and Cd²⁺ (5.0 mg L^-1) were 92.81% and 93.94% at C/N = 1.5 and hydraulic retention time (HRT) = 4 h. The Cd²⁺ was removed by adsorption of iron oxides (FeO(OH) and Fe₃O₄) and IRMG. The electron transport system activity (ETSA) of bacteria was improved and the composition of dissolved organic matter in the effluent was not affected by HNQ. The HNQ promoted the production of FeO(OH) and up-regulated the proportion of Zoogloea (54.75% in the microbial community), indicating that Zoogloea sp. FY6 was dominant in the microbial community. In addition, HNQ influenced the metabolic pathways and improved the relative abundance of some genes involved in nitrogen metabolism and the iron redox cycle.

Enhanced nitrate, fluoride, and phenol removal using polyurethane sponges loaded with rice husk biochar in immobilized bioreactor

Polyurethane sponges loaded with rice husk biochar were prepared to immobilize Aquabacterium sp. CZ3 for intensified removal of nitrate, fluoride (F-), and phenol, with the maximum efficiency of 100 %, 91 %, and 99 %, respectively. The biochar load and increased carbon-to-nitrogen (C:N) ratio (below 3.0) stimulated the secretion of soluble microbial product, improved the electron transport system activity, and promoted denitrification, phenol co-metabolism, and F- and calcium crystallization. The characterization results suggested that F- was removed as fluoride-containing calcium precipitates. According to the microbial community analyses, Aquabacterium was the dominant bacterium. PICRUSt analyses showed that biochar and adequate carbon sources (C:N ratio 3.0) significantly increased the functional abundances of amino acid metabolism, carbohydrate metabolism, energy metabolism, and cell motility. The introduction of biochar reduces the demand for C:N ratio in the system, and expands the application potential of biomineralization technique in the remediation of multiple pollutants contaminated water.

Effects of methanol, sodium citrate, and chlorella powder on enhanced anaerobic treatment of coal pyrolysis wastewater

To better promote environment friendly development of the coal chemical industry, this study investigated effects of methanol, sodium citrate, and chlorella powder (a type of microalgae) as co-metabolic substances on enhanced anaerobic treatment of coal pyrolysis wastewater with anaerobic sludge. The anaerobic sludge was loaded into four 2 L anaerobic reactors for co-metabolism enhanced anaerobic experiments. Anaerobic reactor 1 (R1) as control group did not add a co-metabolic substance; anaerobic reactor 2 (R2) added methanol; anaerobic reactor 3 (R3) added sodium citrate; and anaerobic reactor 4 (R4) added chlorella powder. In the blank control group, the removal ratios of total phenol (TPh), quinoline, and indole were only 12.07%, 42.15%, and 50.47%, respectively, indicating that 50 mg/L quinoline, 50 mg/L indole, and 600 mg/L TPh produced strong toxicity inhibition function on the anaerobic microorganism in reactor. When the concentration of methanol, sodium citrate, and chlorella was 400 μg/L, the reactors with co-metabolic substances had better treatment effect on TPh. Among them, the strengthening effects of sodium citrate (TPh removal ratio: 44.87%) and chlorella (47.85%) were better than that of methanol (38.72%) and the control group (10.62%). Additionally, the reactors with co-metabolic substances had higher degradation ratios on quinoline, indole, and chemical oxygen demand (COD). The data of extracellular polymeric substances showed that with the co-metabolic substances, anaerobic microorganisms produced more humic acids by degrading phenols and nitrogen-containing heterocyclic compounds (NHCs). Compared with the control group, the reactors added with sodium citrate and chlorella had larger average particle size of sludge. Thus, sodium citrate and chlorella could improve sludge sedimentation performance by increasing the sludge particle size. The bacterial community structures of reactors were explored and the results showed that Aminicenantes genera incertae sedis, Levinea, Geobacter, Smithella, Brachymonas, and Longilinea were the main functional bacteria in reactor added with chlorella.

Catalyzing urea hydrolysis using two-step microbial-induced carbonate precipitation for copper immobilization: Perspective of pH regulation

Microbial induced carbonate precipitation (MICP) has recently applied to immobilize heavy metals toward preventing their threats to public health and sustainable development of surrounding environments. However, for copper metallurgy activities higher copper ion concentrations cause the ureolytic bacteria to lose their activity, leading to some difficulty in forming carbonate precipitation for copper immobilization (referred to also as “biomineralization”). A series test tube experiments were conducted in the present work to investigate the effects of bacterial inoculation and pH conditions on the copper immobilization efficiency. The numerical simulations mainly aimed to compare with the experimental results to verify its applicability. The copper immobilization efficiency was attained through azurite precipitation under pH in a 4–6 range, while due to Cu²⁺ migration and diffusion, it reduced to zero under pH below 4. In case pH fell within a 7–9 range, the immobilization efficiency was attained via malachite precipitation. The copper-ammonia complexes formation reduced the immobilization efficiency to zero. The reductions were attributed either to the low degree of urea hydrolysis or to inappropriate pH conditions. The findings shed light on the necessity of securing the urease activity and modifying pH conditions using the two-step biomineralization approach while applying the MICP technology to remedy copper-rich water bodies.