Recent advances in electrochemical sensor developments for detecting emerging pollutant in water environment

Field-deployable pencil lead-based electrochemical cell for the determination of the emerging contaminant and antidepressant drug venlafaxine in wastewater

Screening and quantification of emerging contaminants in water is of enormous relevance due to its scarcity and harmful effects on aquatic life and human health. We present a simple and cost-effective electrochemical cell for determination of the antidepressant venlafaxine, an emerging contaminant included in the EU Watch list 2022. The cell consists of pencil leads used as electrodes and a microcentrifuge tube. Modification of the working electrode with carbon nanomaterials improved the signal. Cell-related (e.g., type of pencil leads or electroactive area) as well as experimental (e.g., pH, accumulation potential and time, and scan rate) parameters were thoroughly optimized. The adsorptive nature of venlafaxine process allowed the use of an adsorptive stripping square wave voltammetry methodology to increase the sensitivity. Under optimized variables, a linear range from 0.8 to 10 μmol L-1 with a correlation coefficient of 0.996, a sensitivity of 1.48 μmol L-1, a LOD of 0.4 μmol L-1 and a RSD of 2.4 % were achieved. Selectivity was also studied, especially with respect to the main metabolite, o-desmethylvenlafaxine. The methodology distinguishes its signal from that of the main compound, allowing its determination. A similar linear range was obtained for the metabolite, with a LOD of 0.6 μmol L-1. The platform developed was applied for venlafaxine quantification in spiked wastewaters from the Febros plant in Portugal, obtaining satisfactory recoveries. Furthermore, the versatility of pencil leads made it possible to combine them with modified paper for sampling and buffering in order to decentralize the determination, showing promising results.

A Simultaneous Calibration and Detection Strategy for Electrochemical Sensing with High Accuracy in Complex Water

The electrochemical sensors loaded with nanomaterials have exhibited a great sensitivity. Nonetheless, the field detection for complex waterbodies can be affected by cross-sensitivity, environmental conditions such as temperature and pH value, as well as the relatively low reproducibility and stability of nanomaterials. In this paper, a simultaneous calibration and detection (SCD) strategy is proposed to introduce a simultaneous and precise calibration during field electrochemical detection, which is composed of a linear regression algorithm and a compact electrochemical sensor containing a series of identical sensing cells. This design can significantly mitigate cross-sensitivity in complex water and the inconsistency of sensing materials. Applied in the NO2- detection for practical waterbodies, the SCD strategy has exhibited a relative error of no more than 9.6% for the measurement compared to the results obtained by the standard Griess method and higher accuracy than the normal electrochemical method. The SCD strategy is independent of sensing materials, indicating that it can be widely applied to various detections by just switching the corresponding sensing material.

Exploring the potential of eco-friendly carbon dots in monitoring and remediation of environmental pollutants

Photoluminescent carbon dots (CDs) have garnered significant interest owing to their distinctive optical and electronic properties. In contrast to semiconductor quantum dots, which incorporated toxic elements in their composition, CDs have emerged as a promising alternative, rendering them suitable for both environmental and biological applications. CDs exhibit astonishing features, including photoluminescence, charge transfer, quantum confinement effect, and biocompatibility. Recently, CDs derived from green sources have drawn a lot of attention due to their strong photostability, reduced toxicity, better biocompatibility, enhanced fluorescence, and simplicity. These attributes have shown great promise in the areas of LED technology, bioimaging, photocatalysis, drug delivery, biosensing, and antibacterial activity. In contrast, this review offers a comprehensive overview of various green sources utilized to produce CDs and methodologies, along with their merits and demerits, with a notable emphasis on physiochemical properties. Additionally, the paper provides insight into the bibliometric analysis and recent advancements of CDs in sensing, photocatalysis, and antibacterial activity. In this field, extensive research is underway, and a total of 7,438 articles have been identified. Among these, 4242 articles are dedicated to sensing applications, while 1518 and 1678 focus on adsorption and degradation. Carbon dots demonstrate exceptional sensing capabilities within the nanomolar range with a selectivity of up to 95% for pollutants. They exhibit excellent degradation efficiency exceeding 90% within 10-130 min and possess an adsorption capacity from 100 to 800 mg/g. These fascinating qualities render them suitable for diverse applications.

Copper Oxide Anchored Carbon Nanofibers: A Versatile Platform for Multiplex Detection of Antibiotics, Heavy Metals and Pesticides

Electrochemical sensors offer promising prospects for real-time pollutant monitoring. In this study, copper oxide-dispersed graphitic carbon nanofibers (CuO-CNFs) grown via chemical vapour deposition were employed as a robust platform for detecting a variety of environmental pollutants. This array-based sensor adeptly identifies three different classes of analytes, i. e., antibiotics (chloramphenicol (CP) and tylosin tartrate (TT)), heavy metals (cadmium (Cd) and lead (Pb)), and pesticides (quinalphos (QP) and imidacloprid (IP)). Electron collection is facilitated by a glassy carbon electrode, while various physico-electrochemical methods delve into the properties of CuO-CNFs. The CuO-CNF-modified GCE array rapidly discerns (<15 sec) a broad linear range: 1-20 ppm for CP, 1-13.33 ppm for TT, 0.66-11.66 ppm for Cd, 20-33.33 ppm for Pb, 1.6-11.6 ppm for QP, and 5-25 ppm for IP, boasting quantification limits of 1.0, 1.0, 0.66, 20.0, 1.6, and 5.0 ppm for CP, TT, Cd, Pb, QP, and IP, respectively. Notably, this sensor achieves simultaneous identification of mixed analytes, including CP and TT, Cd and Pb, and QP and IP, within real tap water. Furthermore, the electrochemical sensor exhibits robustness; heightened sensitivity, selectivity, and stability; a swift response; and impressive reproducibility in detecting CP, TT, Cd, Pb, QP, and IP within aqueous samples. Consequently, this array-based electrochemical sensor has emerged as a rapid and simultaneous detection tool for diverse pollutant residues in surface and groundwater samples.

Design and synthesis of hierarchical MnO-Fe3O4@C/expanded graphite composite for sensitive electrochemical detection of bisphenol A

Hierarchically nanostructured binary transition metal oxide-based materials with high conductivity and catalytic activity are quite attractive for the electrochemical quantitative detection of environmental pollutants due to their natural abundance, variable oxidation state, and excellent synergies between metal sites. Herein, a new hierarchical MnO-Fe3O4@C/expanded graphite (EG) composite is designed and synthesized through a simple and in situ annealing method with the utilization of bimetallic organic framework (FeMn-MOF)/EG precursor. The synthesized MnO-Fe3O4@C/EG composite possesses a unique hierarchical nanoarchitecture that small-sized bimetallic oxide nanoparticles of 10-40 nm completely encapsulated by amorphous carbon layers of 2-4 nm are uniformly distributed on the EG platform. This distinctive structure combines the advantages of high conductivity, excellent catalytic activity, and strong stability. Resultantly, when it is applied to monitor environmental endocrine disruptors, the sensor exhibits a significant catalytic effect on the electrochemical oxidation of bisphenol A (BPA), inducing an amplified response current. In addition, the sensor shows a wide linear range of 1-50 μM and 50-400 μM for the BPA monitor, giving a sensitivity of 5208.8 and 1641.9 μA mM-1 cm-2, respectively. This study offers a new approach to design hierarchical binary metal oxide-based sensing materials as well as to explore their electrochemical properties and applications for the determination of emerging contaminants.

2D MXenes and their composites; design, synthesis, and environmental sensing applications

Novel 2D layered MXene materials were first reported in 2011 at Drexel University. MXenes are widely used in multidisciplinary applications due to their anomalous electrical conductivity, high surface area, and chemical, mechanical, and physical properties. This review summarises MXene synthesis and applications in environmental sensing. The first section describes different methods for MXene synthesis, including fluorinated and non-fluorinated methods. MXene's layered structure, surface terminal groups, and the space between layers significantly impact its properties. Different methods to separate different MXene layers are also discussed using various intercalation reagents and commercially synthesized MXene without compromising the environment. This review also explains the effect of MXene's surface functionalization on its characteristics. The second section of the review describes gas and pesticide sensing applications of Mxenes and its composites. Its good conductivity, surface functionalization with negatively charged groups, intrinsic chemical nature, and good mechanical stability make it a prominent material for room temperature sensing of environmental samples, such as polar and nonpolar gases, volatile organic compounds, and pesticides. This review will enhance the young scientists' knowledge of MXene-based materials and stimulate their diversity and hybrid conformation in environmental sensing applications.

Single entity collision for inorganic water pollutants measurements: Insights and prospects

In the context of aquatic environmental issues, dynamic analysis of nano-sized inorganic water pollutants has been one of the key topics concerning their seriously amplified threat to natural ecosystems and life health. Its ultimate challenge is to reach a single-entity level of identification especially towards substantial amount of inorganic pollutants formed as natural or manufactured nanoparticles (NPs), which enter the water environments along with the potential release of constituents or other contaminating species that may have coprecipitated or adsorbed on the particles' surface. Here, we introduced a 'nano-impacts' approach-single entity collision electrochemistry (SECE) promising for in-situ characterization and quantification of nano-sized inorganic pollutants at single-entity level based on confinement-controlled electrochemistry. In comparison with ensemble analytical tools, advantages and features of SECE point at understanding 'individual' specific fate and effect under its free-motion condition, contributing to obtain more precise information for 'ensemble' nano-sized pollutants on assessing their mixture exposure and toxicity in the environment. This review gives a unique insight about the single-entity collision measurements of various inorganic water pollutants based on recent trends and directions of state-of-the-art single entity electrochemistry, the prospects for exploring nano-impacts in the field of inorganic water pollutants measurements were also put forward.

A state-of-art-review on emerging contaminants: Environmental chemistry, health effect, and modern treatment methods

Pollution problems are increasingly becoming e a priority issue from both scientific and technological points of view. The dispersion and frequency of pollutants in the environment are on the rise, leading to the emergence have been increasing, including of a new class of contaminants that not only impact the environment but also pose risks to people's health. Therefore, developing new methods for identifying and quantifying these pollutants classified as emerging contaminants is imperative. These methods enable regulatory actions that effectively minimize their adverse effects to take steps to regulate and reduce their impact. On the other hand, these new contaminants represent a challenge for current technologies to be adapted to control and remove emerging contaminants and involve innovative, eco-friendly, and sustainable remediation technologies. There is a vast amount of information collected in this review on emerging pollutants, comparing the identification and quantification methods, the technologies applied for their control and remediation, and the policies and regulations necessary for their operation and application. In addition, This review will deal with different aspects of emerging contaminants, their origin, nature, detection, and treatment concerning water and wastewater.

The Role of Silver Nanoparticles in Electrochemical Sensors for Aquatic Environmental Analysis

With rapidly increasing environmental pollution, there is an urgent need for the development of fast, low-cost, and effective sensing devices for the detection of various organic and inorganic substances. Silver nanoparticles (AgNPs) are well known for their superior optoelectronic and physicochemical properties, and have, therefore, attracted a great deal of interest in the sensor arena. The introduction of AgNPs onto the surface of two-dimensional (2D) structures, incorporation into conductive polymers, or within three-dimensional (3D) nanohybrid architectures is a common strategy to fabricate novel platforms with improved chemical and physical properties for analyte sensing. In the first section of this review, the main wet chemical reduction approaches for the successful synthesis of functional AgNPs for electrochemical sensing applications are discussed. Then, a brief section on the sensing principles of voltammetric and amperometric sensors is given. The current utilization of silver nanoparticles and silver-based composite nanomaterials for the fabrication of voltammetric and amperometric sensors as novel platforms for the detection of environmental pollutants in water matrices is summarized. Finally, the current challenges and future directions for the nanosilver-based electrochemical sensing of environmental pollutants are outlined.

A review on pollutants remediation competence of nanocomposites on contaminated water

Clean freshwater has been required for drinking, sanitation, agricultural activities, and industry, as well as for the development and maintenance of the eco - systems on which all livelihoods rely. Water contamination is currently a significant concern for researchers all over the world; hence it is essential that somehow this issue is resolved as soon as possible. It is now recognised as one of the most important research areas in the world. Current wastewater treatment techniques degrade a wide range of wastewaters efficiently; however, such methods have some limitations. Recently, nanotechnology has emerged as a wonderful solution, and researchers are conducting research in this water remediation field with a variety of potential applications. The pollutants remediation capability of nanocomposites as adsorbents, photocatalysts, magnetic separation, and so on for contaminant removal from contaminated water has been examined in this study. This study has spotlighted the most significant nanocomposites invention reported to date for contaminated and effluent remediation, as well as a research gap as well as possible future perspectives.

Decoration of alkalization-intercalated Ti3C2 with ZIF-8@ZIF-67-derived N-doped carbon nanocage for detecting 4-nitrophenol

The highly effective alk-Ti₃C₂/bimetallic Co, Zn embedded N-doped carbon (Co-Zn-NC) composite was fabricated by a convenient self-assembled method strategy and applied to  the reduction of 4-nitrophenol(4-NP). Co-Zn-NC nanocage was synthesized by using designed core-shell ZIF-8@ZIF-67 as sacrificial template. The Co-Zn-NC was prepared by pyrolysis of ZIF-8@ZIF-67 at 900 °C with high-specific surface area and hollow structure, which facilitates the dispersion of Co species and produces abundant Co-Nx active sites. In addition, the electrochemical property and specific surface area of Ti₃C₂ were improved by alkaline treatment. As a result, compared with alk-Ti₃C₂ and Co-Zn-NC, the alk-Ti₃C₂/Co-Zn-NC sensor showed higher activity and stability in detecting 4-NP. The alk-Ti₃C₂/Co-Zn-NC sensor has a wide determination range of 2-500 μM and a low detection limit of 0.23 μM for 4-NP. In addition, the newly developed alk-Ti₃C₂/Co-Zn-NC sensor displayed satisfactory reproducibility and  good stability in detecting 4-NP in aqueous samples.

Recent advances in carbon-based nanomaterials for the treatment of toxic inorganic pollutants in wastewater

Wastewater contains inorganic pollutants, generated by industrial and domestic sources, such as heavy metals, antibiotics, and chemical pesticides, and these pollutants cause many environmental problems.

A recent advancement on the applications of nanomaterials in electrochemical sensors and biosensors

Industrialization and globalization, both on an international and local scale, have caused large quantities of toxic chemicals to be released into the environment. Thus, developing an environmental pollutant sensor platform that is sensitive, reliable, and cost-effective is extremely important. In current years, considerable progress has been made in the expansion of electrochemical sensors and biosensors to monitor the environment using nanomaterials. A large number of emerging biomarkers are currently in existence in the biological fluids, clinical, pharmaceutical and bionanomaterial-based electrochemical biosensor platforms have drawn much attention. Electrochemical systems have been used to detect biomarkers rapidly, sensitively, and selectively using biomaterials such as biopolymers, nucleic acids, proteins etc. In this current review, several recent trends have been identified in the growth of electrochemical sensor platforms using nanotechnology such as carbon nanomaterials, metal oxide nanomaterials, metal nanoparticles, biomaterials and polymers. The integration strategies, applications, specific properties and future projections of nanostructured materials for emerging progressive sensor platforms are also observed. The objective of this review is to provide a comprehensive overview of nanoparticles in the field of electrochemical sensors and biosensors.

A pencil graphite-based disposable device for electrochemical monitoring of sulfanilamide in honey and water samples

The present paper reports a simple, fast, and inexpensive process of manufacturing a disposable pencil graphite electrode (PGE) from widely available materials, which showed a reproducibility of at least 7.5%. The electrode was compared to the commercial glassy carbon electrode (GCE) and showed superior electroanalytical performance for sulfanilamide (SFA) with approximately 3.9-fold higher current density. Additionally, a displacement of the oxidation peak from approximately 80 mV to more cathodic regions was observed. Therefore, a method based on square wave voltammetry (SWV) was developed for the determination of the antimicrobial SFA in honey and tap water samples using the proposed sensor. The optimized method presented good detectability (LOD = 2.37 μmol L^-1), with excellent precision and accuracy (relative standard deviation < 4.2%) and percent recovery from spiked samples ranging from 92 to 97%. In addition, the sensor did not suffer significant interference from sample matrix components and other commonly evaluated antimicrobials, which demonstrates the potential of these electrodes for implementation in routine analysis and quality control.