Thiol-decorated defective metal-organic framework for effective removal of mercury(II) ion

Diamino-functionalized metal-organic framework for selective capture of gold ions

Adsorptive recovery of valuable gold (Au) ions from wastes is vital but still challenged, especially regarding adsorption capacity and selectivity. A novel M - 3,5-DABA metal-organic framework (MOF) adsorbent was prepared via anchoring 3,5-diaminobenzoic acid (3,5-DABA) molecule in the MOF-808 matrix. Benefiting from the positive charge property, dense amino groups (3.2 mmol g-1) and high porosity, the adsorption capacity of M - 3,5-DABA reaches 1391.5 mg g-1 (pH = 2.5) and adsorption equilibrium is attained in 5 min. This amino-based material shows excellent selectivity towards various metal ions, evading the poor selectivity problem of classical thiol groups (e.g. for Ag+, Cu2+, Pb2+ and Hg2+ ions). In addition, the regeneration was easily achieved via using a hydrochloric acid-thiourea eluent. Experimental analysis and density functional theory (DFT) calculation show the amino group works as a reductant for Au(III) ions and meanwhile acts as an active site for adsorbing Au(III) ions together with the μ-OH group. Thus, M - 3,5-DABA can act as a potential adsorbent for Au(III) ions, and our work offers a viable strategy to construct novel MOF-based adsorbents.

Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications

This comprehensive review explores the diverse applications of defective zirconium-based metal-organic frameworks (Zr-MOFs) in energy and environmental remediation. Zr-MOFs have gained significant attention due to their unique properties, and deliberate introduction of defects further enhances their functionality. The review encompasses several areas where defective Zr-MOFs exhibit promise, including environmental remediation, detoxification of chemical warfare agents, photocatalytic energy conversions, and electrochemical applications. Defects play a pivotal role by creating open sites within the framework, facilitating effective adsorption and remediation of pollutants. They also contribute to the catalytic activity of Zr-MOFs, enabling efficient energy conversion processes such as hydrogen production and CO2 reduction. The review underscores the importance of defect manipulation, including control over their distribution and type, to optimize the performance of Zr-MOFs. Through tailored defect engineering and precise selection of functional groups, researchers can enhance the selectivity and efficiency of Zr-MOFs for specific applications. Additionally, pore size manipulation influences the adsorption capacity and transport properties of Zr-MOFs, further expanding their potential in environmental remediation and energy conversion. Defective Zr-MOFs exhibit remarkable stability and synthetic versatility, making them suitable for diverse environmental conditions and allowing for the introduction of missing linkers, cluster defects, or post-synthetic modifications to precisely tailor their properties. Overall, this review highlights the promising prospects of defective Zr-MOFs in addressing energy and environmental challenges, positioning them as versatile tools for sustainable solutions and paving the way for advancements in various sectors toward a cleaner and more sustainable future.

Facile synthesis of lignin-based Fe-MOF for fast adsorption of methyl orange

To rapidly remove dyes from wastewater, iron-based metal-organic frameworks modified with phenolated lignin (NH2-MIL@L) were prepared by a one-step hydrothermal method. Analyses of the chemical structure and adsorption mechanism of the NH2-MIL@L proved the successful introduction of lignin and the enhancement of its adsorption sites. Compared with NH2-MIL-101-Fe without phenolated lignin, the modification with lignin increased the methyl orange (MO) adsorption rate of NH2-MIL@L. For the best adsorbent, NH2-MIL@L4, the MO adsorption efficiency in MO solution reached 95.09% within 5 min. NH2-MIL@L4 reached adsorption equilibrium within 90 min, exhibiting an MO adsorption capacity of 195.31 mg/g. The process followed pseudo-second-order kinetics and the Dubinin-Radushkevich model. MO adsorption efficiency of NH2-MIL@L4 was maintained at 89.87% after six adsorption-desorption cycles. In mixed solutions of MO and methylene blue (MB), NH2-MIL@L4 achieved an MO adsorption of 94.02% at 5 min and reached MO adsorption equilibrium within 15 min with an MO adsorption capacity of 438.6 mg/g, while the MB adsorption equilibrium was established at 90 min with an MB adsorption rate and capacity of 95.60% and 481.34 mg/g, respectively. NH2-MIL@L4 sustained its excellent adsorption efficiency after six adsorption-desorption cycles (91.2% for MO and 93.4% for MB). The process of MO adsorption by NH2-MIL@L4 followed the Temkin model and pseudo-second-order kinetics, while MB adsorption followed the Dubinin-Radushkevich model and pseudo-second-order kinetics. Electrostatic interactions, π-π interactions, hydrogen bonding, and synergistic interactions affected the MO adsorption process of NH2-MIL@L4.

Integration of metal organic framework nanoparticles into sodium alginate biopolymer-based three-dimensional membrane capsules for the efficient removal of toxic metal cations from water and real sewage

Sodium alginate (SA) biopolymer has been recognized as an efficient adsorbent material owing to their unique characteristics, including biodegradability, non-toxic nature, and presence of abundant hydrophilic functional groups. Accordingly, in the current research work, UiO-66-OH and UiO-66-(OH)2 metal organic framework (MOF) nanoparticles (NPs) have been integrated into SA biopolymer-based three-dimensional (3-D) membrane capsules (MCs) via a simple and facile approach to remove toxic metal cations (Cu2+ and Cd2+) from water and real sewage. The newly configured capsules were characterized by FTIR, SEM, XRD, EDX and XPS analyses techniques. Exceptional sorption properties of the as-developed capsules were ensured by evaluation of the pertinent operational parameters, i.e., contents of MOF-NPs (1-100 wt%), adsorbent dosage (0.001-0.05 g), content time (0-360 h), pH (1-8), initial concentration of metal cations (5-1000 mg/L) and reaction temperature (298.15-333.15 K) on the eradication of Cu2+ and Cd2+ metal cations. It was found that hydrophilic functional groups (-OH and -COOH) have performed an imperative role in the smooth loading of MOF-NPs into 3-D membrane capsules via intra/inter-molecular hydrogen bonding and van der waals potencies. The maximum monolayer uptake capacities (as calculated by the Langmuir isotherm model) of Cd2+ and Cu2+ by 3-D SGMMCs-OH were 940 and 1150 mg/g, respectively, and by 3-D SGMMCs-(OH)2 were 1375 and 1575 mg/g, respectively, under optimum conditions. The as-developed capsules have demonstrated superior selectivity against targeted metal cations under designated pH and maintained >80 % removal efficiency up to six consecutive treatment cycles. Removal mechanisms of metal cations by the 3-D SGMMCs-OH/(OH)2 was proposed, and electrostatic interaction, ion-exchange, inner-sphere coordination bonds/interactions, and aromatic ligands exchange were observed to be the key removal mechanisms. Notably, FTIR and XPS analysis indicated that hydroxyl groups of Zr-OH and BDC-OH/(OH)2 aromatic linkers played vital roles in Cu2+ and Cd2+ adsorption by participating in inner-sphere coordination interactions and aromatic ligands exchange mechanisms. The as-prepared capsules indicated >70 % removal efficiency of Cu2+ from real electroplating wastewater in the manifestation of other competitive metal ions and pollutants under selected experimental conditions. Thus, it was observed that newly configured 3-D SGMMCs-OH/(OH)2 have offered a valuable discernment into the development of MOFs-based water decontamination 3-D capsules for industrial applications.

Thiol-functionalized cellulose for mercury polluted water remediation: Synthesis and study of the adsorption properties

Mercury pollution poses a global health threat due to its high toxicity, especially in seafood where it accumulates through various pathways. Developing effective and affordable technologies for mercury removal from water is crucial. Adsorption stands out as a promising method, but creating low-cost materials with high selectivity and capacity for mercury adsorption is challenging. Here we show a sustainable method to synthesize low-cost sulfhydrylated cellulose with ethylene sulfide functionalities bonded glucose units. Thiol-functionalized cellulose exhibits exceptional adsorption capacity (1325 mg g-1) and selectivity for Hg(II) over other heavy metals (Co, Cu, Zn, Pb) and common cations (Ca++, Mg++) found in natural waters. It performs efficiently across a wide pH range and different aqueous matrices, including wastewater, and can be regenerated and reused multiple times without significant loss of performance. This approach offers a promising solution for addressing mercury contamination in water sources.

Highly selective detection and removal of mercury ions in the aquatic environment based on magnetic ZIF-71 multifunctional composites with sufficient chlorine functional groups

The development of both detection and removal technologies for heavy metal ions is of great importance. Most of the existing adsorbents that contain oxygen, nitrogen or sulfur functional groups can remove heavy metals, but achieving both selective detection and removal of a single metal ion is difficult because they bind to a wide range of heavy metal ions. Herein, we selected zeolite imidazolium hydrochloride framework-71 (ZIF-71) with sufficient chlorine functional groups to fabricate magnetic ZIF-71 multifunctional composites (M-ZIF-71). M-ZIF-71 had a large specific surface area, excellent water stability, and good magnetic properties, which made M-ZIF-71 conducive to the separation and recovery of adsorbents and the assembly of electrodes. M-ZIF-71 exhibited high selectivity, wide linear range (1-500 μg/L), and low detection limit (0.32 μg/L) for electrochemical detection of mercury ions (Hg2+). Meanwhile, M-ZIF-71 demonstrated rapid Hg2+ adsorption with a high capacity of 571.2 mg/g and excellent recyclability. The high selectivity for Hg2+ was attributed to the powerful affinity of highly electronegative chlorine and Hg2+. Moreover, XPS spectra demonstrated the interaction between chlorine and Hg2+. This work provides a new inspiration for applications in the targeted monitoring and removal of heavy metal pollution.

Functionalization of Defective Zr Metal-Organic Frameworks for Water Decontamination: Mechanistic Insight into the Competitive Roles of -NH2 and -SH Sites in Removal of As(III) Species

Direct removal of trivalent arsenic, As(III), arsenite, or H3AsO3, is a great challenge in accessing clean sources of water. Different methodologies and materials were applied in this regard, but among them, direct removal of As(III) species using a metal-organic framework (MOF)-based adsorbent shows a great deal of potential. Although some studies were conducted on As(III) removal using MOFs, studies of functional groups are still quite rare. For this purpose, three novel functionalized defective Zr-MOFs, using UiO-66 [Zr6(OH)4O4(BDC)6, where BDC2- = benzene-1,4-dicarboxylate], were fabricated to investigate the competitive or cooperative roles of the free -NH2 and/or -SH site in the removal of As(III). UiO-66 was functionalized with monocarboxylate linkers, including glycine (Gly, NH2-CH2-COOH), cysteine [Cys, SH(CH2)-NH2(CH)-COOH], and mercaptopropionic acid [Mer, SH-(CH2)2-COOH]. Gly@UiO-66, Cys@UiO-66, and Mer@UiO-66 were applied for the direct removal of As(III) species. Although Cys@UiO-66 is functionalized with both amine and thiol functional groups, Gly@UiO-66 has a higher adsorption capacity (301.4 mg g-1) with respect to As(III), which is among the best reported values. This is due to the fact that (1) the affinity of amine sites in Gly@UiO-66 for As(III) is higher than that of thiol sites in Mer@UiO-66 and (2) Cys@UiO-66 has a very small surface area compared to that of Gly@UiO-66. Mechanistic studies using X-ray photoelectron spectroscopy and vibrational spectroscopy reveal that not only the functionalization and chemical nature of the function but also other parameters such as the protonation-deprotonation mechanisms and chemical state of the function are other critical factors for designing a functional MOF-based adsorbent with high affinity for and maximum capacity with respect to the target analyte.

Assembling 99% MOFs into Bioinspired Rigid-Flexible Coupled Membrane with Significant Permeability: The Impacts of Defects

Assembling metal-organic frameworks (MOFs) into high-performance macroscopic membranes is crucial but still challenging. MOF-containing hybrid membranes can effectively integrate the advantages of flexible guest materials and MOFs. Nevertheless, the inherent limitations in fully harnessing the distinct characteristics of MOFs persist due to the substantial guest material content necessitated in membrane fabrication. Herein, inspired by the rigid and flexible structures in biological systems, rigid MIP-202(Zr) and defective MIP-202(Zr) (D-MIP-202(Zr)) modified flexible graphene oxide (GO) sheets are synthesized in situ and then assembled into a rigid-flexible coupled MOF-based membrane. The defects in D-MIP-202(Zr) are introduced by using acetic acid as the modulation agent. The obtained GO@MIP-202(Zr) membrane possesses a hierarchical porous structure with a 99 wt% MOF proportion, which is higher than the GO@D-MIP-202(Zr) (75 wt%) membrane with a compact bulge-structured surface. The water permeability of the GO@MIP-202(Zr) membrane attains remarkedly 5762.92 L h-1 m-2 bar-1 , which is 960 and 2.6 times higher than that of the GO membrane and GO@D-MIP-202(Zr) membrane. Additionally, benefiting from the superhydrophilicity and underwater superoleophobicity, the resultant membrane not only demonstrates high rejection for oil-water emulsions but also exhibits exceptional recyclability and anti-fouling ability. These findings provide valuable insights into the assembly of MOFs into high-performance membranes.

Harnessing the Chemical Functionality of Metal-Organic Frameworks Toward Removal of Aqueous Pollutants

Wastewater treatment has been bestowed with a plethora of materials; among them, metal-organic frameworks (MOFs) are one such kind with exceptional properties. Besides their application in gas adsorption and storage, they are applied in many fields. In orientation toward wastewater treatment, MOFs have been and are being successfully employed to capture a variety of aqueous pollutants, including both organic and inorganic ones. This review sheds light on the postsynthetic modifications (PSMs) performed over MOFs to adsorb and degrade recalcitrant. Modifications performed on the metal nodes and the linkers have been explained with reference to some widely used chemical modifications like alkylation, amination, thiol addition, tandem modifications, and coordinate modifications. The boost in pollutant removal efficacy, reaction rate, adsorption capacity, and selectivity for the modified MOFs is highlighted. The rationale and the robustness of micromotor MOFs, i.e., MOFs with motor activity, and their potential application in the capture of toxic pollutants are also presented for readers. This review also discusses the challenges and future recommendations to be considered in performing PSM over a MOF concerning wastewater treatment.

Different roles of FeS and FeS2 on magnetic FeSx for the selective adsorption of Hg2+ from waste acids in smelters: Reaction mechanism, kinetics, and structure-activity relationship

Magnetic FeSx was developed as a high-performance sorbent for selectively adsorbing Hg2+ from waste acids in smelters. However, further improvement of its ability for Hg2+ adsorption was extremely restricted due to the lack of reaction mechanisms and structure-activity relationships. In this study, the roles of FeS and FeS2 on magnetic FeSx for Hg2+ adsorption were investigated with alternate adsorption of Hg2+ without/with Cl-. The structure-activity relationship of magnetic FeSx for Hg2+ adsorption and the negative effect of acid erosion were elucidated using kinetic analysis. FeS can react with Hg2+ with 1:1 stoichiometric ratio to form HgS, while FeS2 can react with Hg2+ in the presence of Cl- with novel 1:3 stoichiometric ratio to form Hg3S2Cl2. The rate of magnetic FeSx for Hg2+ adsorption was related to the instantaneous amounts of FeS and threefold FeS2 on magnetic FeSx and the amount of Hg2+ adsorbed. Meanwhile, its capacity for Hg2+ adsorption was related to the initial sum of FeS amount and threefold FeS2 amount on the surface and their ratios by acid erosion. Then, magnetic FeSx-400 was devised with adsorption rate of 2.12 mg g-1 min-1 and capacity of 1092 mg g-1 to recover Hg2+ from waste acids for centralized control.

A review on recent environmental electrochemistry approaches for the consolidation of a circular economy model

Availability of raw materials in the chemical industry is related to the selection of the chemical processes in which they are used as well as to the efficiency, cost, and eventual evolution to more competitive dynamics of transformation technologies. In general terms however, any chemically transforming technology starts with the extraction, purification, design, manufacture, use, and disposal of materials. It is important to create a new paradigm towards green chemistry, sustainability, and circular economy in the chemical sciences that help to better employ, reuse, and recycle the materials used in every aspect of modern life. Electrochemistry is a growing field of knowledge that can help with these issues to reduce solid waste and the impact of chemical processes on the environment. Several electrochemical studies in the last decades have benefited the recovery of important chemical compounds and elements through electrodeposition, electrowinning, electrocoagulation, electrodialysis, and other processes. The use of living organisms and microorganisms using an electrochemical perspective (known as bioelectrochemistry), is also calling attention to "mining", through plants and microorganisms, essential chemical elements. New process design or the optimization of the current technologies is a major necessity to enhance production and minimize the use of raw materials along with less generation of wastes and secondary by-products. In this context, this contribution aims to show an up-to-date scenario of both environmental electrochemical and bioelectrochemical processes for the extraction, use, recovery and recycling of materials in a circular economy model.

Highly Stable Amide-Functionalized Zirconium-Organic Frameworks: Synthesis, Structure, and Methane Storage Capacity

With the development of crystalline porous materials toward methane storage, the stability issue of metal-organic framework (MOF) materials has caused great concern despite high working capacity. Considering the high stability of zirconium-based MOFs and effective functions of amide groups toward gas adsorption, herein, a series of UiO-66 type of Zr-MOFs, namely, Zr-fcu-H/F/CH3/OH, were successfully designed and synthesized by virtue of amide-functionalized dicarboxylate ligands bearing distinct side groups (i.e., -H, -F, -CH3, and -OH) and ZrCl4 in the presence of trifluoroacetic acid as the modulator. Single-crystal X-ray diffraction and topology analyses reveal that these compounds are archetypal fcu MOFs encompassing octahedral and tetrahedral cages, respectively. The N2 sorption isotherms and acid-base stability tests demonstrate that the materials possess not only relatively high surface areas, pore volumes, and appropriate pore sizes but also great hydrolytic stabilities ranging pH = 3-11. Furthermore, the volumetric methane storage working capacities of Zr-fcu-H, Zr-fcu-F, Zr-fcu-CH3, and Zr-fcu-OH at 298/273 K and 80 bar are 187/217, 175/193, 167/187, and 154/171 cm3 (STP) cm-3, respectively, which indicate that the zirconium-based crystalline porous materials are capable of storing relatively high amounts of methane.

Construction of defective zirconium-based metal-organic frameworks for enhanced removal of toxic selenite: performance and mechanism studies

The development of effective adsorbents for the adsorption and removal of toxic selenite (SeO₃^2-) from wastewater is urgently required but challenging. Herein, formic acid (FA), a monocarboxylic acid, was used as a template to construct serial defective Zr-Fumarate (Fum) -FA based on a green and facile preparation method. Physicochemical characterization shows that the defect degree of Zr-Fum-FA can be flexibly controlled by regulating the amount of FA to be added. Owing to rich defect units, the diffusion and mass transfer of guest SeO₃^2- into the channel can be boosted. Particularly, Zr-Fum-FA-6 with the most defects exhibits superior adsorption capacity (519.6 mg g^-1) and rapid adsorption equilibrium (∼200 min). The adsorption isotherms and kinetics can be well described by the Langmuir and pseudo-second-order kinetic models. Moreover, this adsorbent possesses excellent resistance towards co-existing ions, high chemical stability and good applicability in a broad pH range of 3-10. Thus, our study provides a promising adsorbent for SeO₃^2-, and more importantly, it proposes a strategy for rationally tailoring the adsorption behavior of adsorbents via defect construction.

Metalloporphyrin-Based Metal–Organic Frameworks for Photocatalytic Carbon Dioxide Reduction: The Influence of Metal Centers

Photocatalysis is one of the most promising technologies to achieve efficient carbon dioxide reduction reaction (CO2RR) under mild conditions. Herein, metalloporphyrin-based metal–organic frameworks (MOFs) with different metal centers, denoted as PCN-222, were utilized as visible-light photocatalysts for CO2 reduction. Due to the combination of the conjugated planar macrocyclic structures of metalloporphyrins and the stable porous structures of MOFs, all PCN-222 materials exhibited excellent light-harvesting and CO2-adsorbing abilities. Among the studied MOFs of varied metal centers (M = Pt, Fe, Cu, Zn, Mn), PCN-222(2H&Zn) exhibited the highest photocatalytic CO2RR performance, with an average CO yield of 3.92 μmol g−1 h−1 without any organic solvent or sacrificial agent. Furthermore, this was three and seven times higher than that of PCN-222(Zn) (1.36 μmol g−1 h−1) and PCN-222(2H) (0.557 μmol g−1 h−1). The superior photocatalytic activity of PCN-222(2H&Zn) was attributed to its effective photoexcited electron–hole separation and transportation compared with other PCN-222(2H&M) materials. The obtained results indicate that Zn ions in the porphyrin’s center played an important role in the reaction of active sites for the adsorption–activation of CO2. In addition, PCN-222(2H&Zn) showed the highest CO2 selectivity (almost 100%) and stability. This work provides a clear guide for the design of efficient photocatalysts.